libvirt/tests/qemuxml2xmltest.c

1314 lines
50 KiB
C
Raw Normal View History

#include <config.h>
#include <unistd.h>
2007-07-18 21:34:22 +00:00
#include <sys/types.h>
#include <fcntl.h>
#include "testutils.h"
#include "internal.h"
#include "testutilsqemu.h"
#include "virfilewrapper.h"
#include "configmake.h"
#define LIBVIRT_QEMU_CAPSPRIV_H_ALLOW
#include "qemu/qemu_capspriv.h"
#define VIR_FROM_THIS VIR_FROM_NONE
static virQEMUDriver driver;
static virCaps *linuxCaps;
static virCaps *macOSCaps;
2007-07-18 21:34:22 +00:00
enum {
WHEN_INACTIVE = 1,
WHEN_ACTIVE = 2,
WHEN_BOTH = 3,
};
static int
testXML2XMLCommon(const struct testQemuInfo *info)
{
int rc;
if (testQemuInfoInitArgs((struct testQemuInfo *) info) < 0)
return -1;
if (info->args.hostOS == HOST_OS_MACOS)
driver.caps = macOSCaps;
else
driver.caps = linuxCaps;
if (!(info->flags & FLAG_REAL_CAPS))
virQEMUCapsInitQMPBasicArch(info->qemuCaps);
if (info->args.hostOS == HOST_OS_MACOS)
rc = qemuTestCapsCacheInsertMacOS(driver.qemuCapsCache, info->qemuCaps);
else
rc = qemuTestCapsCacheInsert(driver.qemuCapsCache, info->qemuCaps);
if (rc < 0)
return -1;
return 0;
}
static int
testXML2XMLActive(const void *opaque)
{
const struct testQemuInfo *info = opaque;
if (testXML2XMLCommon(info) < 0 ||
testCompareDomXML2XMLFiles(driver.caps, driver.xmlopt,
info->infile, info->outfile, true,
info->parseFlags,
TEST_COMPARE_DOM_XML2XML_RESULT_SUCCESS) < 0) {
return -1;
}
return 0;
}
static int
testXML2XMLInactive(const void *opaque)
{
const struct testQemuInfo *info = opaque;
if (testXML2XMLCommon(info) < 0 ||
testCompareDomXML2XMLFiles(driver.caps, driver.xmlopt,
info->infile, info->outfile, false,
info->parseFlags,
TEST_COMPARE_DOM_XML2XML_RESULT_SUCCESS) < 0) {
return -1;
}
return 0;
}
static void
testInfoSetPaths(struct testQemuInfo *info,
const char *suffix,
int when)
{
VIR_FREE(info->infile);
VIR_FREE(info->outfile);
info->infile = g_strdup_printf("%s/qemuxml2argvdata/%s.xml", abs_srcdir,
info->name);
info->outfile = g_strdup_printf("%s/qemuxml2xmloutdata/%s-%s%s.xml",
abs_srcdir, info->name,
when == WHEN_ACTIVE ? "active" : "inactive", suffix);
if (!virFileExists(info->outfile)) {
VIR_FREE(info->outfile);
info->outfile = g_strdup_printf("%s/qemuxml2xmloutdata/%s%s.xml",
abs_srcdir, info->name, suffix);
}
2007-07-18 21:34:22 +00:00
}
#define FAKEROOTDIRTEMPLATE abs_builddir "/fakerootdir-XXXXXX"
static int
tests: simplify common setup A few of the tests were missing basic sanity checks, while most of them were doing copy-and-paste initialization (in fact, some of them pasted the argc > 1 check more than once!). It's much nicer to do things in one common place, and minimizes the size of the next patch that fixes getcwd usage. * tests/testutils.h (EXIT_AM_HARDFAIL): New define. (progname, abs_srcdir): Define for all tests. (VIRT_TEST_MAIN): Change callback signature. * tests/testutils.c (virtTestMain): Do more common init. * tests/commandtest.c (mymain): Simplify. * tests/cputest.c (mymain): Likewise. * tests/esxutilstest.c (mymain): Likewise. * tests/eventtest.c (mymain): Likewise. * tests/hashtest.c (mymain): Likewise. * tests/networkxml2xmltest.c (mymain): Likewise. * tests/nodedevxml2xmltest.c (myname): Likewise. * tests/nodeinfotest.c (mymain): Likewise. * tests/nwfilterxml2xmltest.c (mymain): Likewise. * tests/qemuargv2xmltest.c (mymain): Likewise. * tests/qemuhelptest.c (mymain): Likewise. * tests/qemuxml2argvtest.c (mymain): Likewise. * tests/qemuxml2xmltest.c (mymain): Likewise. * tests/qparamtest.c (mymain): Likewise. * tests/sexpr2xmltest.c (mymain): Likewise. * tests/sockettest.c (mymain): Likewise. * tests/statstest.c (mymain): Likewise. * tests/storagepoolxml2xmltest.c (mymain): Likewise. * tests/storagevolxml2xmltest.c (mymain): Likewise. * tests/virbuftest.c (mymain): Likewise. * tests/virshtest.c (mymain): Likewise. * tests/vmx2xmltest.c (mymain): Likewise. * tests/xencapstest.c (mymain): Likewise. * tests/xmconfigtest.c (mymain): Likewise. * tests/xml2sexprtest.c (mymain): Likewise. * tests/xml2vmxtest.c (mymain): Likewise.
2011-04-29 16:21:20 +00:00
mymain(void)
2007-07-18 21:34:22 +00:00
{
int ret = 0;
g_autofree char *fakerootdir = NULL;
g_autoptr(virQEMUDriverConfig) cfg = NULL;
g_autoptr(GHashTable) capslatest = testQemuGetLatestCaps();
g_autoptr(GHashTable) capscache = virHashNew(virObjectUnref);
g_autoptr(virConnect) conn = NULL;
struct testQemuConf testConf = { .capslatest = capslatest,
.capscache = capscache,
.qapiSchemaCache = NULL };
if (!capslatest)
return EXIT_FAILURE;
fakerootdir = g_strdup(FAKEROOTDIRTEMPLATE);
if (!g_mkdtemp(fakerootdir)) {
fprintf(stderr, "Cannot create fakerootdir");
abort();
}
g_setenv("LIBVIRT_FAKE_ROOT_DIR", fakerootdir, TRUE);
/* Required for tpm-emulator tests
*/
virFileWrapperAddPrefix(SYSCONFDIR "/qemu/firmware",
abs_srcdir "/qemufirmwaredata/etc/qemu/firmware");
virFileWrapperAddPrefix(PREFIX "/share/qemu/firmware",
abs_srcdir "/qemufirmwaredata/usr/share/qemu/firmware");
virFileWrapperAddPrefix("/home/user/.config/qemu/firmware",
abs_srcdir "/qemufirmwaredata/home/user/.config/qemu/firmware");
if (qemuTestDriverInit(&driver) < 0)
return EXIT_FAILURE;
/* By default, the driver gets a virCaps instance that's suitable for
* tests that expect Linux as the host OS. We create another one for
* macOS and keep around pointers to both: this allows us to later
* pick the appropriate one for each test case */
linuxCaps = driver.caps;
macOSCaps = testQemuCapsInitMacOS();
cfg = virQEMUDriverGetConfig(&driver);
driver.privileged = true;
if (!(conn = virGetConnect()))
goto cleanup;
virSetConnectInterface(conn);
virSetConnectNetwork(conn);
virSetConnectNWFilter(conn);
virSetConnectNodeDev(conn);
virSetConnectSecret(conn);
virSetConnectStorage(conn);
#define DO_TEST_FULL(_name, suffix, when, ...) \
do { \
static struct testQemuInfo info = { \
.name = _name, \
}; \
testQemuInfoSetArgs(&info, &testConf, __VA_ARGS__); \
\
if (when & WHEN_INACTIVE) { \
testInfoSetPaths(&info, suffix, WHEN_INACTIVE); \
virTestRunLog(&ret, "QEMU XML-2-XML-inactive " _name, testXML2XMLInactive, &info); \
} \
\
if (when & WHEN_ACTIVE) { \
testInfoSetPaths(&info, suffix, WHEN_ACTIVE); \
virTestRunLog(&ret, "QEMU XML-2-XML-active " _name, testXML2XMLActive, &info); \
} \
testQemuInfoClear(&info); \
} while (0)
#define DO_TEST_CAPS_INTERNAL(name, arch, ver, ...) \
DO_TEST_FULL(name, "." arch "-" ver, WHEN_BOTH, \
ARG_CAPS_ARCH, arch, \
ARG_CAPS_VER, ver, \
__VA_ARGS__, \
ARG_END)
#define DO_TEST_CAPS_ARCH_LATEST_FULL(name, arch, ...) \
DO_TEST_CAPS_INTERNAL(name, arch, "latest", __VA_ARGS__)
#define DO_TEST_CAPS_ARCH_VER_FULL(name, arch, ver, ...) \
DO_TEST_CAPS_INTERNAL(name, arch, ver, __VA_ARGS__)
#define DO_TEST_CAPS_ARCH_LATEST(name, arch) \
DO_TEST_CAPS_ARCH_LATEST_FULL(name, arch, ARG_END)
#define DO_TEST_CAPS_ARCH_VER(name, arch, ver) \
DO_TEST_CAPS_ARCH_VER_FULL(name, arch, ver, ARG_END)
#define DO_TEST_CAPS_LATEST(name) \
DO_TEST_CAPS_ARCH_LATEST(name, "x86_64")
#define DO_TEST_CAPS_VER(name, ver) \
DO_TEST_CAPS_ARCH_VER(name, "x86_64", ver)
#define DO_TEST(name, ...) \
DO_TEST_FULL(name, "", WHEN_BOTH, \
ARG_QEMU_CAPS, __VA_ARGS__, QEMU_CAPS_LAST, ARG_END)
#define DO_TEST_NOCAPS(name) \
DO_TEST_FULL(name, "", WHEN_BOTH, ARG_END)
#define DO_TEST_MACOS(name, ...) \
DO_TEST_FULL(name, "", WHEN_BOTH, \
ARG_HOST_OS, HOST_OS_MACOS, \
ARG_QEMU_CAPS, __VA_ARGS__, QEMU_CAPS_LAST, ARG_END)
/* Unset or set all envvars here that are copied in qemudBuildCommandLine
* using ADD_ENV_COPY, otherwise these tests may fail due to unexpected
* values for these envvars */
g_setenv("PATH", "/bin", TRUE);
g_unsetenv("QEMU_AUDIO_DRV");
g_unsetenv("SDL_AUDIODRIVER");
DO_TEST_NOCAPS("minimal");
DO_TEST_CAPS_LATEST("genid");
DO_TEST_CAPS_LATEST("genid-auto");
DO_TEST_NOCAPS("machine-core-on");
DO_TEST_NOCAPS("machine-core-off");
DO_TEST_CAPS_LATEST("machine-smm-on");
DO_TEST_CAPS_LATEST("machine-smm-off");
DO_TEST_NOCAPS("machine-loadparm-multiple-disks-nets-s390");
DO_TEST_NOCAPS("default-kvm-host-arch");
DO_TEST_NOCAPS("default-qemu-host-arch");
DO_TEST_NOCAPS("boot-cdrom");
DO_TEST_NOCAPS("boot-network");
DO_TEST_NOCAPS("boot-floppy");
DO_TEST("boot-floppy-q35",
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI);
DO_TEST_NOCAPS("boot-multi");
DO_TEST_NOCAPS("boot-menu-enable-with-timeout");
DO_TEST_NOCAPS("boot-menu-disable");
DO_TEST_NOCAPS("boot-menu-disable-with-timeout");
DO_TEST_NOCAPS("boot-order");
DO_TEST_NOCAPS("reboot-timeout-enabled");
DO_TEST_NOCAPS("reboot-timeout-disabled");
DO_TEST_NOCAPS("clock-utc");
DO_TEST_NOCAPS("clock-localtime");
DO_TEST_NOCAPS("cpu-empty");
DO_TEST_NOCAPS("cpu-kvmclock");
DO_TEST_NOCAPS("cpu-host-kvmclock");
DO_TEST_NOCAPS("cpu-host-passthrough-features");
DO_TEST_NOCAPS("cpu-host-model-features");
DO_TEST_NOCAPS("cpu-host-model-vendor");
DO_TEST("clock-catchup", QEMU_CAPS_KVM_PIT_TICK_POLICY);
DO_TEST_NOCAPS("kvmclock");
DO_TEST_NOCAPS("clock-timer-hyperv-rtc");
DO_TEST_CAPS_ARCH_LATEST("clock-timer-armvtimer", "aarch64");
DO_TEST_NOCAPS("clock-realtime");
DO_TEST_CAPS_LATEST("clock-absolute");
DO_TEST_NOCAPS("cpu-eoi-disabled");
DO_TEST_NOCAPS("cpu-eoi-enabled");
DO_TEST_NOCAPS("eoi-disabled");
DO_TEST_NOCAPS("eoi-enabled");
DO_TEST_NOCAPS("pv-spinlock-disabled");
DO_TEST_NOCAPS("pv-spinlock-enabled");
DO_TEST_NOCAPS("hyperv");
DO_TEST_NOCAPS("hyperv-off");
DO_TEST_NOCAPS("hyperv-panic");
DO_TEST_NOCAPS("hyperv-passthrough");
DO_TEST_NOCAPS("hyperv-stimer-direct");
DO_TEST_NOCAPS("kvm-features");
DO_TEST_NOCAPS("kvm-features-off");
DO_TEST_NOCAPS("pmu-feature");
DO_TEST_NOCAPS("pmu-feature-off");
DO_TEST_NOCAPS("pages-discard");
DO_TEST_CAPS_LATEST("pages-discard-hugepages");
DO_TEST_CAPS_LATEST("pages-dimm-discard");
DO_TEST_CAPS_LATEST("hugepages-default");
DO_TEST_CAPS_LATEST("hugepages-default-2M");
DO_TEST_CAPS_LATEST("hugepages-default-system-size");
DO_TEST_CAPS_LATEST("hugepages-nodeset");
DO_TEST_CAPS_LATEST("hugepages-numa-default-2M");
DO_TEST_CAPS_LATEST("hugepages-numa-default-dimm");
DO_TEST_CAPS_LATEST("hugepages-numa-nodeset");
DO_TEST_CAPS_LATEST("hugepages-numa-nodeset-part");
DO_TEST_CAPS_LATEST("hugepages-shared");
DO_TEST_CAPS_LATEST("hugepages-memaccess");
DO_TEST_CAPS_LATEST("hugepages-memaccess2");
DO_TEST_CAPS_LATEST("hugepages-memaccess3");
DO_TEST_CAPS_LATEST("hugepages-nvdimm");
DO_TEST_NOCAPS("nosharepages");
DO_TEST_NOCAPS("restore-v2");
DO_TEST_NOCAPS("migrate");
DO_TEST_NOCAPS("qemu-ns-no-env");
DO_TEST_CAPS_LATEST("qemu-ns");
DO_TEST_NOCAPS("disk-aio");
DO_TEST_CAPS_LATEST("disk-aio-io_uring");
DO_TEST_NOCAPS("disk-cdrom");
DO_TEST_CAPS_LATEST("disk-cdrom-empty-network-invalid");
DO_TEST_CAPS_LATEST("disk-cdrom-network");
DO_TEST("disk-cdrom-bus-other", QEMU_CAPS_DEVICE_USB_STORAGE);
DO_TEST_NOCAPS("disk-floppy");
DO_TEST("disk-usb-device", QEMU_CAPS_DEVICE_USB_STORAGE);
DO_TEST_NOCAPS("disk-virtio");
DO_TEST_NOCAPS("floppy-drive-fat");
DO_TEST_CAPS_LATEST("disk-virtio-queues");
DO_TEST_NOCAPS("disk-boot-disk");
DO_TEST_NOCAPS("disk-boot-cdrom");
DO_TEST_NOCAPS("disk-error-policy");
DO_TEST_CAPS_LATEST("disk-transient");
DO_TEST_NOCAPS("disk-fmt-qcow");
DO_TEST_CAPS_LATEST("disk-cache");
DO_TEST_CAPS_LATEST("disk-metadata-cache");
DO_TEST_NOCAPS("disk-network-nbd");
DO_TEST("disk-network-iscsi", QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_SCSI_BLOCK);
DO_TEST_NOCAPS("disk-network-gluster");
DO_TEST_NOCAPS("disk-network-rbd");
DO_TEST_CAPS_LATEST("disk-network-rbd-encryption");
DO_TEST_NOCAPS("disk-network-source-auth");
DO_TEST_NOCAPS("disk-network-sheepdog");
DO_TEST_NOCAPS("disk-network-vxhs");
DO_TEST_CAPS_LATEST("disk-network-nfs");
DO_TEST_NOCAPS("disk-network-tlsx509-nbd");
DO_TEST_CAPS_LATEST("disk-network-tlsx509-nbd-hostname");
DO_TEST_NOCAPS("disk-network-tlsx509-vxhs");
DO_TEST_CAPS_LATEST("disk-nvme");
DO_TEST_CAPS_LATEST("disk-vhostuser");
DO_TEST_CAPS_LATEST("disk-scsi");
DO_TEST("disk-virtio-scsi-reservations",
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_PR_MANAGER_HELPER,
QEMU_CAPS_SCSI_BLOCK);
DO_TEST("controller-virtio-scsi", QEMU_CAPS_VIRTIO_SCSI);
DO_TEST("disk-virtio-s390-zpci",
QEMU_CAPS_DEVICE_ZPCI);
DO_TEST_NOCAPS("disk-mirror-old");
DO_TEST_NOCAPS("disk-mirror");
DO_TEST_NOCAPS("disk-active-commit");
DO_TEST("graphics-listen-network",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_VNC);
DO_TEST("graphics-vnc",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_VNC);
DO_TEST("graphics-vnc-websocket",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_VNC);
DO_TEST("graphics-vnc-sasl",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_VNC);
DO_TEST("graphics-vnc-tls",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_VNC);
DO_TEST("graphics-vnc-no-listen-attr",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_VNC);
DO_TEST("graphics-vnc-remove-generated-socket",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_VNC);
cfg->vncAutoUnixSocket = true;
DO_TEST("graphics-vnc-auto-socket-cfg",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_VNC);
cfg->vncAutoUnixSocket = false;
DO_TEST("graphics-vnc-socket",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_VNC);
DO_TEST("graphics-vnc-auto-socket",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_VNC);
DO_TEST("graphics-vnc-egl-headless",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_VNC,
QEMU_CAPS_EGL_HEADLESS);
DO_TEST("graphics-dbus",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_DISPLAY_DBUS);
DO_TEST("graphics-dbus-address",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_DISPLAY_DBUS);
DO_TEST("graphics-dbus-p2p",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_DISPLAY_DBUS);
DO_TEST("graphics-dbus-audio",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_DISPLAY_DBUS);
DO_TEST("graphics-dbus-chardev",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_DISPLAY_DBUS);
DO_TEST_CAPS_ARCH_LATEST("default-video-type-aarch64", "aarch64");
DO_TEST_CAPS_ARCH_LATEST("default-video-type-ppc64", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("default-video-type-riscv64", "riscv64");
DO_TEST_CAPS_ARCH_LATEST("default-video-type-s390x", "s390x");
DO_TEST("default-video-type-x86_64-caps-test-0",
QEMU_CAPS_DEVICE_VGA,
QEMU_CAPS_SPICE);
DO_TEST("default-video-type-x86_64-caps-test-1",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_SPICE);
DO_TEST("graphics-sdl", QEMU_CAPS_DEVICE_VGA, QEMU_CAPS_SDL);
DO_TEST("graphics-sdl-fullscreen", QEMU_CAPS_DEVICE_CIRRUS_VGA, QEMU_CAPS_SDL);
cfg->spiceTLS = true;
DO_TEST_CAPS_LATEST("graphics-spice");
DO_TEST_CAPS_LATEST("graphics-spice-compression");
DO_TEST_CAPS_LATEST("graphics-spice-qxl-vga");
DO_TEST_CAPS_LATEST("graphics-spice-socket");
DO_TEST_CAPS_LATEST("graphics-spice-auto-socket");
cfg->spiceAutoUnixSocket = true;
DO_TEST_CAPS_LATEST("graphics-spice-auto-socket-cfg");
cfg->spiceAutoUnixSocket = false;
cfg->spiceTLS = false;
DO_TEST_CAPS_LATEST("graphics-spice-egl-headless");
DO_TEST_CAPS_LATEST("graphics-spice-timeout");
DO_TEST("graphics-egl-headless-rendernode",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_EGL_HEADLESS_RENDERNODE,
QEMU_CAPS_EGL_HEADLESS);
DO_TEST_NOCAPS("input-usbmouse");
DO_TEST_NOCAPS("input-usbtablet");
DO_TEST_NOCAPS("misc-acpi");
DO_TEST("misc-disable-s3", QEMU_CAPS_PIIX_DISABLE_S3);
DO_TEST_CAPS_LATEST("pc-i440fx-acpi-root-hotplug-disable");
DO_TEST_CAPS_LATEST("pc-i440fx-acpi-root-hotplug-enable");
DO_TEST("misc-disable-suspends",
QEMU_CAPS_PIIX_DISABLE_S3,
QEMU_CAPS_PIIX_DISABLE_S4);
DO_TEST("misc-enable-s4", QEMU_CAPS_PIIX_DISABLE_S4);
DO_TEST_NOCAPS("misc-no-reboot");
DO_TEST_NOCAPS("misc-uuid");
DO_TEST_NOCAPS("net-vhostuser");
DO_TEST_NOCAPS("net-user");
DO_TEST_NOCAPS("net-user-addr");
DO_TEST_NOCAPS("net-virtio");
DO_TEST_NOCAPS("net-virtio-device");
DO_TEST_NOCAPS("net-virtio-disable-offloads");
DO_TEST_NOCAPS("net-eth");
DO_TEST_NOCAPS("net-eth-ifname");
DO_TEST_NOCAPS("net-eth-hostip");
DO_TEST_NOCAPS("net-eth-unmanaged-tap");
DO_TEST_NOCAPS("net-virtio-network-portgroup");
DO_TEST_NOCAPS("net-virtio-rxtxqueuesize");
DO_TEST("net-virtio-teaming",
QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("net-virtio-teaming-network",
conf: parse/format <teaming> element in plain <hostdev> The <teaming> element in <interface> allows pairing two interfaces together as a simple "failover bond" network device in a guest. One of the devices is the "transient" interface - it will be preferred for all network traffic when it is present, but may be removed when necessary, in particular during migration, when traffic will instead go through the other interface of the pair - the "persistent" interface. As it happens, in the QEMU implementation of this teaming pair (called "virtio failover" in QEMU) the transient interface is always a host network device assigned to the guest using VFIO (aka "hostdev"); the persistent interface is always an emulated virtio NIC. When support was initially added for <teaming>, it was written to require that the transient/hostdev device be defined using <interface type='hostdev'>; this was done because the virtio failover implementation in QEMU and the virtio guest driver demands that the two interfaces in the pair have matching MAC addresses, and the only way libvirt can guarantee the MAC address of a hostdev network device is to use <interface type='hostdev'>, whose main purpose is to configure the device's MAC address before handing the device to QEMU. (note that <interface type='hostdev'> in turn requires that the network device be an SRIOV VF (Virtual Function), as that is the only type of network device whose MAC address we can set in a way that will survive the device's driver init in the guest). It has recently come up that some users are unable to use <teaming> because they are running in a container environment where libvirt doesn't have the necessary privileges or resources to set the VF's MAC address (because setting the VF MAC is done via the same device's PF (Physical Function), and the PF is not exposed to libvirt's container). At the same time, these users *are* able to set the VF's MAC address themselves in advance of staring up libvirt in the container. So they could theoretically use the <teaming> feature if libvirt just skipped the "setting the MAC address" part. Fortunately, that is *exactly* the difference between <interface type='hostdev'> (which must be a "hostdev VF") and <hostdev> (a "plain hostdev" - it could be *any* PCI device; libvirt doesn't know what type of PCI device it is, and doesn't care). But what is still needed is for libvirt to provide a small bit of information on the QEMU commandline argument for the hostdev, telling QEMU that this device will be part of a team ("failover pair"), and the id of the other device in the pair. To make both of those goals simultaneously possible, this patch adds support for the <teaming> element to plain <hostdev> - libvirt doesn't try to set any MAC addresses, and QEMU gets the extra commandline argument it needs) (actually, this patch adds only the parsing/formatting of the <teaming> element in <hostdev>. The next patch will actually wire that into the qemu driver.) Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-11 05:58:29 +00:00
QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("net-virtio-teaming-hostdev",
QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST_CAPS_LATEST("net-isolated-port");
DO_TEST_NOCAPS("net-hostdev");
DO_TEST_NOCAPS("net-hostdev-bootorder");
DO_TEST("net-hostdev-vfio", QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST_NOCAPS("net-midonet");
DO_TEST_NOCAPS("net-openvswitch");
DO_TEST_NOCAPS("sound");
DO_TEST("sound-device",
QEMU_CAPS_DEVICE_ICH9_INTEL_HDA,
QEMU_CAPS_OBJECT_USB_AUDIO,
QEMU_CAPS_HDA_MICRO,
QEMU_CAPS_HDA_DUPLEX,
QEMU_CAPS_HDA_OUTPUT);
DO_TEST_NOCAPS("watchdog");
DO_TEST("net-bandwidth", QEMU_CAPS_DEVICE_VGA, QEMU_CAPS_VNC);
DO_TEST("net-bandwidth2", QEMU_CAPS_DEVICE_VGA, QEMU_CAPS_VNC);
DO_TEST_NOCAPS("net-mtu");
DO_TEST_NOCAPS("net-coalesce");
DO_TEST_NOCAPS("net-many-models");
DO_TEST("net-vdpa", QEMU_CAPS_NETDEV_VHOST_VDPA);
DO_TEST("net-vdpa-multiqueue", QEMU_CAPS_NETDEV_VHOST_VDPA);
DO_TEST_CAPS_LATEST("net-virtio-rss");
DO_TEST_NOCAPS("serial-tcp-tlsx509-chardev");
DO_TEST_NOCAPS("serial-tcp-tlsx509-chardev-notls");
cfg->spiceTLS = true;
DO_TEST("serial-spiceport",
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_SPICE);
cfg->spiceTLS = false;
DO_TEST_NOCAPS("serial-debugcon");
DO_TEST_NOCAPS("console-compat");
DO_TEST_NOCAPS("console-compat2");
DO_TEST_NOCAPS("console-virtio-many");
DO_TEST_NOCAPS("channel-guestfwd");
DO_TEST_NOCAPS("channel-virtio");
DO_TEST_NOCAPS("channel-virtio-state");
DO_TEST_NOCAPS("channel-unix-source-path");
DO_TEST_CAPS_LATEST("hostdev-usb-address");
DO_TEST_CAPS_LATEST("hostdev-pci-address");
DO_TEST("hostdev-pci-address-unassigned", QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("hostdev-pci-multifunction", QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("hostdev-vfio", QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("hostdev-vfio-zpci",
QEMU_CAPS_DEVICE_VFIO_PCI,
QEMU_CAPS_DEVICE_ZPCI);
DO_TEST("hostdev-vfio-zpci-multidomain-many",
QEMU_CAPS_DEVICE_VFIO_PCI,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_ZPCI);
DO_TEST("hostdev-vfio-zpci-autogenerate",
QEMU_CAPS_DEVICE_VFIO_PCI,
QEMU_CAPS_DEVICE_ZPCI);
DO_TEST("hostdev-vfio-zpci-autogenerate-uids",
QEMU_CAPS_DEVICE_VFIO_PCI,
QEMU_CAPS_DEVICE_ZPCI);
DO_TEST("hostdev-vfio-zpci-autogenerate-fids",
QEMU_CAPS_DEVICE_VFIO_PCI,
QEMU_CAPS_DEVICE_ZPCI);
DO_TEST("hostdev-vfio-zpci-boundaries",
QEMU_CAPS_DEVICE_VFIO_PCI,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_ZPCI);
DO_TEST("hostdev-vfio-zpci-ccw-memballoon",
QEMU_CAPS_DEVICE_VFIO_PCI,
QEMU_CAPS_DEVICE_ZPCI);
DO_TEST("hostdev-mdev-precreated", QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("hostdev-mdev-display",
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_VFIO_PCI_DISPLAY,
QEMU_CAPS_DEVICE_VFIO_PCI,
QEMU_CAPS_VNC);
DO_TEST_CAPS_LATEST("hostdev-mdev-display-ramfb");
DO_TEST_NOCAPS("pci-rom");
DO_TEST_NOCAPS("pci-rom-disabled");
DO_TEST_NOCAPS("pci-rom-disabled-invalid");
DO_TEST_NOCAPS("pci-serial-dev-chardev");
DO_TEST_CAPS_LATEST("disk-slices");
DO_TEST_CAPS_LATEST("disk-rotation");
DO_TEST_CAPS_LATEST("encrypted-disk");
DO_TEST_CAPS_LATEST("encrypted-disk-usage");
DO_TEST_CAPS_LATEST("luks-disks");
DO_TEST_CAPS_LATEST("luks-disks-source");
DO_TEST_CAPS_LATEST("luks-disks-source-qcow2");
DO_TEST_NOCAPS("memtune");
DO_TEST_NOCAPS("memtune-unlimited");
DO_TEST_NOCAPS("blkiotune");
DO_TEST_NOCAPS("blkiotune-device");
DO_TEST_NOCAPS("cputune");
DO_TEST_NOCAPS("cputune-zero-shares");
DO_TEST_NOCAPS("cputune-iothreadsched");
DO_TEST_NOCAPS("cputune-iothreadsched-zeropriority");
DO_TEST_NOCAPS("cputune-numatune");
DO_TEST("vcpu-placement-static",
QEMU_CAPS_KVM,
QEMU_CAPS_OBJECT_IOTHREAD);
DO_TEST_CAPS_LATEST("cputune-cpuset-big-id");
DO_TEST_CAPS_LATEST("numavcpus-topology-mismatch");
DO_TEST_NOCAPS("smp");
DO_TEST_NOCAPS("iothreads");
DO_TEST_NOCAPS("iothreads-ids");
DO_TEST_CAPS_LATEST("iothreads-ids-pool-sizes");
DO_TEST_NOCAPS("iothreads-ids-partial");
DO_TEST_NOCAPS("cputune-iothreads");
DO_TEST_NOCAPS("iothreads-disk");
DO_TEST_NOCAPS("iothreads-disk-virtio-ccw");
DO_TEST("iothreads-virtio-scsi-pci",
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST("iothreads-virtio-scsi-ccw",
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST_NOCAPS("lease");
DO_TEST_NOCAPS("event_idx");
DO_TEST_NOCAPS("vhost_queues");
DO_TEST_NOCAPS("interface-driver");
DO_TEST_NOCAPS("net-server");
DO_TEST_NOCAPS("virtio-lun");
DO_TEST_NOCAPS("usb-none");
DO_TEST_NOCAPS("usb-controller");
DO_TEST("usb-piix3-controller",
QEMU_CAPS_PIIX3_USB_UHCI);
DO_TEST("usb-controller-default-q35",
qemu: initially reserve one open pcie-root-port for hotplug For machinetypes with a pci-root bus (all legacy PCI), libvirt will make a "fake" reservation for one extra slot prior to assigning addresses to unaddressed PCI endpoint devices in the domain. This will trigger auto-adding of a pci-bridge for the final device to be assigned an address *if that device would have otherwise instead been the last device on the last available pci-bridge*; thus it assures that there will always be at least one slot left open in the domain's bus topology for expansion (which is important both for hotplug (since a new pci-bridge can't be added while the guest is running) as well as for offline additions to the config (since adding a new device might otherwise in some cases require re-addressing existing devices, which we want to avoid)). It's important to note that for the above case (legacy PCI), we must check for the special case of all slots on all buses being occupied *prior to assigning any addresses*, and avoid attempting to reserve the extra address in that case, because there is no free address in the existing topology, so no place to auto-add a pci-bridge for expansion (i.e. it would always fail anyway). Since that condition can only be reached by manual intervention, this is acceptable. For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's methodology for automatically expanding the bus topology is different - pcie-root-ports are plugged into slots (soon to be functions) of pcie-root as needed, and the new endpoint devices are assigned to the single slot in each pcie-root-port. This is done so that the devices are, by default, hotpluggable (the slots of pcie-root don't support hotplug, but the single slot of the pcie-root-port does). Since pcie-root-ports can only be plugged into pcie-root, and we don't auto-assign endpoint devices to the pcie-root slots, this means topology expansion doesn't compete with endpoint devices for slots, so we don't need to worry about checking for all "useful" slots being free *prior* to assigning addresses to new endpoint devices - as a matter of fact, if we attempt to reserve the open slots before the used slots, it can lead to errors. Instead this patch just reserves one slot for a "future potential" PCIe device after doing the assignment for actual devices, but only if the only PCI controller defined prior to starting address assignment was pcie-root, and only if we auto-added at least one PCI controller during address assignment. This assures two things: 1) that reserving the open slots will only be done when the domain is initially defined, never at any time after, and 2) that if the user understands enough about PCI controllers that they are adding them manually, that we don't mess up their plan by adding extras - if they know enough to add one pcie-root-port, or to manually assign addresses such that no pcie-root-ports are needed, they know enough to add extra pcie-root-ports if they want them (this could be called the "libguestfs clause", since libguestfs needs to be able to create domains with as few devices/controllers as possible). This is set to reserve a single free port for now, but could be increased in the future if public sentiment goes in that direction (it's easy to increase later, but essentially impossible to decrease)
2016-09-28 00:37:30 +00:00
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_PCI_OHCI,
QEMU_CAPS_PIIX3_USB_UHCI,
QEMU_CAPS_NEC_USB_XHCI);
DO_TEST("usb-controller-explicit-q35",
qemu: initially reserve one open pcie-root-port for hotplug For machinetypes with a pci-root bus (all legacy PCI), libvirt will make a "fake" reservation for one extra slot prior to assigning addresses to unaddressed PCI endpoint devices in the domain. This will trigger auto-adding of a pci-bridge for the final device to be assigned an address *if that device would have otherwise instead been the last device on the last available pci-bridge*; thus it assures that there will always be at least one slot left open in the domain's bus topology for expansion (which is important both for hotplug (since a new pci-bridge can't be added while the guest is running) as well as for offline additions to the config (since adding a new device might otherwise in some cases require re-addressing existing devices, which we want to avoid)). It's important to note that for the above case (legacy PCI), we must check for the special case of all slots on all buses being occupied *prior to assigning any addresses*, and avoid attempting to reserve the extra address in that case, because there is no free address in the existing topology, so no place to auto-add a pci-bridge for expansion (i.e. it would always fail anyway). Since that condition can only be reached by manual intervention, this is acceptable. For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's methodology for automatically expanding the bus topology is different - pcie-root-ports are plugged into slots (soon to be functions) of pcie-root as needed, and the new endpoint devices are assigned to the single slot in each pcie-root-port. This is done so that the devices are, by default, hotpluggable (the slots of pcie-root don't support hotplug, but the single slot of the pcie-root-port does). Since pcie-root-ports can only be plugged into pcie-root, and we don't auto-assign endpoint devices to the pcie-root slots, this means topology expansion doesn't compete with endpoint devices for slots, so we don't need to worry about checking for all "useful" slots being free *prior* to assigning addresses to new endpoint devices - as a matter of fact, if we attempt to reserve the open slots before the used slots, it can lead to errors. Instead this patch just reserves one slot for a "future potential" PCIe device after doing the assignment for actual devices, but only if the only PCI controller defined prior to starting address assignment was pcie-root, and only if we auto-added at least one PCI controller during address assignment. This assures two things: 1) that reserving the open slots will only be done when the domain is initially defined, never at any time after, and 2) that if the user understands enough about PCI controllers that they are adding them manually, that we don't mess up their plan by adding extras - if they know enough to add one pcie-root-port, or to manually assign addresses such that no pcie-root-ports are needed, they know enough to add extra pcie-root-ports if they want them (this could be called the "libguestfs clause", since libguestfs needs to be able to create domains with as few devices/controllers as possible). This is set to reserve a single free port for now, but could be increased in the future if public sentiment goes in that direction (it's easy to increase later, but essentially impossible to decrease)
2016-09-28 00:37:30 +00:00
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_PCI_OHCI,
QEMU_CAPS_PIIX3_USB_UHCI,
QEMU_CAPS_NEC_USB_XHCI);
DO_TEST("ppc64-usb-controller",
QEMU_CAPS_DEVICE_SPAPR_PCI_HOST_BRIDGE,
QEMU_CAPS_PCI_OHCI);
DO_TEST("ppc64-usb-controller-legacy",
QEMU_CAPS_DEVICE_SPAPR_PCI_HOST_BRIDGE,
QEMU_CAPS_PIIX3_USB_UHCI);
DO_TEST("usb-port-missing", QEMU_CAPS_USB_HUB);
DO_TEST("usb-redir", QEMU_CAPS_USB_REDIR,
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("usb-redir-filter",
QEMU_CAPS_USB_REDIR,
QEMU_CAPS_USB_REDIR_FILTER,
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("usb-redir-filter-version",
QEMU_CAPS_USB_REDIR,
QEMU_CAPS_USB_REDIR_FILTER,
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST_CAPS_LATEST("blkdeviotune");
DO_TEST_CAPS_LATEST("blkdeviotune-max");
DO_TEST_CAPS_LATEST("blkdeviotune-group-num");
DO_TEST_CAPS_LATEST("blkdeviotune-max-length");
DO_TEST_CAPS_LATEST("controller-usb-order");
DO_TEST_CAPS_ARCH_LATEST("ppc64-tpmproxy-single", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("ppc64-tpmproxy-with-tpm", "ppc64");
DO_TEST_FULL("seclabel-dynamic-baselabel", "", WHEN_INACTIVE, ARG_END);
DO_TEST_FULL("seclabel-dynamic-override", "", WHEN_INACTIVE, ARG_END);
DO_TEST_FULL("seclabel-dynamic-labelskip", "", WHEN_INACTIVE, ARG_END);
DO_TEST_FULL("seclabel-dynamic-relabel", "", WHEN_INACTIVE, ARG_END);
DO_TEST_NOCAPS("seclabel-static");
DO_TEST_NOCAPS("seclabel-static-labelskip");
DO_TEST_NOCAPS("seclabel-none");
DO_TEST_NOCAPS("seclabel-dac-none");
DO_TEST_NOCAPS("seclabel-dynamic-none");
DO_TEST_NOCAPS("seclabel-device-multiple");
DO_TEST_FULL("seclabel-dynamic-none-relabel", "", WHEN_INACTIVE,
ARG_QEMU_CAPS, QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_SPICE, QEMU_CAPS_LAST,
ARG_END);
DO_TEST_NOCAPS("numad-static-vcpu-no-numatune");
DO_TEST("disk-scsi-disk-vpd",
QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_DISK_WWN);
DO_TEST_NOCAPS("disk-source-pool");
DO_TEST_NOCAPS("disk-source-pool-mode");
DO_TEST_CAPS_LATEST("disk-discard");
DO_TEST_CAPS_LATEST("disk-detect-zeroes");
DO_TEST_NOCAPS("disk-serial");
DO_TEST_CAPS_ARCH_LATEST("disk-arm-virtio-sd", "aarch64");
DO_TEST("virtio-rng-random",
QEMU_CAPS_DEVICE_VIRTIO_RNG,
QEMU_CAPS_OBJECT_RNG_RANDOM);
DO_TEST("virtio-rng-egd",
QEMU_CAPS_DEVICE_VIRTIO_RNG,
QEMU_CAPS_OBJECT_RNG_EGD);
DO_TEST_CAPS_LATEST("virtio-rng-builtin");
DO_TEST_CAPS_ARCH_LATEST("pseries-nvram", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-panic-missing", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-panic-no-address", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-phb-simple", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-phb-default-missing", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-phb-numa-node", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-many-devices", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-many-buses-1", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-many-buses-2", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-hostdevs-1", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-hostdevs-2", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-hostdevs-3", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-features", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-serial-native", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-serial+console-native", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-serial-compat", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-serial-pci", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-serial-usb", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-console-native", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-console-virtio", "ppc64");
DO_TEST_NOCAPS("mach-virt-serial-native");
DO_TEST_NOCAPS("mach-virt-serial+console-native");
DO_TEST_NOCAPS("mach-virt-serial-compat");
DO_TEST("mach-virt-serial-pci",
QEMU_CAPS_OBJECT_GPEX,
QEMU_CAPS_DEVICE_PCIE_ROOT_PORT,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PCI_SERIAL);
DO_TEST("mach-virt-serial-usb",
QEMU_CAPS_OBJECT_GPEX,
QEMU_CAPS_DEVICE_PCIE_ROOT_PORT,
QEMU_CAPS_DEVICE_QEMU_XHCI,
QEMU_CAPS_DEVICE_USB_SERIAL);
DO_TEST("mach-virt-console-native",
QEMU_CAPS_DEVICE_PL011);
DO_TEST("mach-virt-console-virtio",
QEMU_CAPS_DEVICE_VIRTIO_MMIO);
DO_TEST_NOCAPS("balloon-device-auto");
DO_TEST_NOCAPS("balloon-device-period");
DO_TEST_NOCAPS("channel-virtio-auto");
DO_TEST_NOCAPS("console-compat-auto");
DO_TEST("disk-scsi-device-auto",
QEMU_CAPS_SCSI_LSI);
DO_TEST_NOCAPS("console-virtio");
DO_TEST_NOCAPS("serial-target-port-auto");
DO_TEST("graphics-listen-network2",
QEMU_CAPS_DEVICE_CIRRUS_VGA,
QEMU_CAPS_VNC);
DO_TEST_NOCAPS("numad-auto-vcpu-no-numatune");
DO_TEST_NOCAPS("numad-auto-memory-vcpu-no-cpuset-and-placement");
DO_TEST_NOCAPS("numad-auto-memory-vcpu-cpuset");
DO_TEST_NOCAPS("usb-ich9-ehci-addr");
DO_TEST_NOCAPS("disk-copy_on_read");
DO_TEST_CAPS_LATEST("tpm-passthrough");
DO_TEST_CAPS_LATEST("tpm-passthrough-crb");
DO_TEST_CAPS_LATEST("tpm-emulator");
DO_TEST_CAPS_ARCH_LATEST("tpm-emulator-spapr", "ppc64");
DO_TEST_CAPS_LATEST("tpm-emulator-tpm2");
DO_TEST_CAPS_LATEST("tpm-emulator-tpm2-enc");
DO_TEST_CAPS_LATEST("tpm-emulator-tpm2-pstate");
DO_TEST_CAPS_ARCH_LATEST("aarch64-tpm", "aarch64");
DO_TEST_CAPS_LATEST("tpm-external");
DO_TEST_NOCAPS("metadata");
DO_TEST_NOCAPS("metadata-duplicate");
DO_TEST("pci-bridge",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_VNC,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("pci-many",
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("pci-bridge-many-disks",
QEMU_CAPS_DEVICE_PCI_BRIDGE);
DO_TEST("pci-autoadd-addr",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("pci-autoadd-idx",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("pci-autofill-addr", QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("q35",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
qemu: initially reserve one open pcie-root-port for hotplug For machinetypes with a pci-root bus (all legacy PCI), libvirt will make a "fake" reservation for one extra slot prior to assigning addresses to unaddressed PCI endpoint devices in the domain. This will trigger auto-adding of a pci-bridge for the final device to be assigned an address *if that device would have otherwise instead been the last device on the last available pci-bridge*; thus it assures that there will always be at least one slot left open in the domain's bus topology for expansion (which is important both for hotplug (since a new pci-bridge can't be added while the guest is running) as well as for offline additions to the config (since adding a new device might otherwise in some cases require re-addressing existing devices, which we want to avoid)). It's important to note that for the above case (legacy PCI), we must check for the special case of all slots on all buses being occupied *prior to assigning any addresses*, and avoid attempting to reserve the extra address in that case, because there is no free address in the existing topology, so no place to auto-add a pci-bridge for expansion (i.e. it would always fail anyway). Since that condition can only be reached by manual intervention, this is acceptable. For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's methodology for automatically expanding the bus topology is different - pcie-root-ports are plugged into slots (soon to be functions) of pcie-root as needed, and the new endpoint devices are assigned to the single slot in each pcie-root-port. This is done so that the devices are, by default, hotpluggable (the slots of pcie-root don't support hotplug, but the single slot of the pcie-root-port does). Since pcie-root-ports can only be plugged into pcie-root, and we don't auto-assign endpoint devices to the pcie-root slots, this means topology expansion doesn't compete with endpoint devices for slots, so we don't need to worry about checking for all "useful" slots being free *prior* to assigning addresses to new endpoint devices - as a matter of fact, if we attempt to reserve the open slots before the used slots, it can lead to errors. Instead this patch just reserves one slot for a "future potential" PCIe device after doing the assignment for actual devices, but only if the only PCI controller defined prior to starting address assignment was pcie-root, and only if we auto-added at least one PCI controller during address assignment. This assures two things: 1) that reserving the open slots will only be done when the domain is initially defined, never at any time after, and 2) that if the user understands enough about PCI controllers that they are adding them manually, that we don't mess up their plan by adding extras - if they know enough to add one pcie-root-port, or to manually assign addresses such that no pcie-root-ports are needed, they know enough to add extra pcie-root-ports if they want them (this could be called the "libguestfs clause", since libguestfs needs to be able to create domains with as few devices/controllers as possible). This is set to reserve a single free port for now, but could be increased in the future if public sentiment goes in that direction (it's easy to increase later, but essentially impossible to decrease)
2016-09-28 00:37:30 +00:00
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("q35-usb2",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
qemu: initially reserve one open pcie-root-port for hotplug For machinetypes with a pci-root bus (all legacy PCI), libvirt will make a "fake" reservation for one extra slot prior to assigning addresses to unaddressed PCI endpoint devices in the domain. This will trigger auto-adding of a pci-bridge for the final device to be assigned an address *if that device would have otherwise instead been the last device on the last available pci-bridge*; thus it assures that there will always be at least one slot left open in the domain's bus topology for expansion (which is important both for hotplug (since a new pci-bridge can't be added while the guest is running) as well as for offline additions to the config (since adding a new device might otherwise in some cases require re-addressing existing devices, which we want to avoid)). It's important to note that for the above case (legacy PCI), we must check for the special case of all slots on all buses being occupied *prior to assigning any addresses*, and avoid attempting to reserve the extra address in that case, because there is no free address in the existing topology, so no place to auto-add a pci-bridge for expansion (i.e. it would always fail anyway). Since that condition can only be reached by manual intervention, this is acceptable. For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's methodology for automatically expanding the bus topology is different - pcie-root-ports are plugged into slots (soon to be functions) of pcie-root as needed, and the new endpoint devices are assigned to the single slot in each pcie-root-port. This is done so that the devices are, by default, hotpluggable (the slots of pcie-root don't support hotplug, but the single slot of the pcie-root-port does). Since pcie-root-ports can only be plugged into pcie-root, and we don't auto-assign endpoint devices to the pcie-root slots, this means topology expansion doesn't compete with endpoint devices for slots, so we don't need to worry about checking for all "useful" slots being free *prior* to assigning addresses to new endpoint devices - as a matter of fact, if we attempt to reserve the open slots before the used slots, it can lead to errors. Instead this patch just reserves one slot for a "future potential" PCIe device after doing the assignment for actual devices, but only if the only PCI controller defined prior to starting address assignment was pcie-root, and only if we auto-added at least one PCI controller during address assignment. This assures two things: 1) that reserving the open slots will only be done when the domain is initially defined, never at any time after, and 2) that if the user understands enough about PCI controllers that they are adding them manually, that we don't mess up their plan by adding extras - if they know enough to add one pcie-root-port, or to manually assign addresses such that no pcie-root-ports are needed, they know enough to add extra pcie-root-ports if they want them (this could be called the "libguestfs clause", since libguestfs needs to be able to create domains with as few devices/controllers as possible). This is set to reserve a single free port for now, but could be increased in the future if public sentiment goes in that direction (it's easy to increase later, but essentially impossible to decrease)
2016-09-28 00:37:30 +00:00
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("q35-usb2-multi",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
qemu: initially reserve one open pcie-root-port for hotplug For machinetypes with a pci-root bus (all legacy PCI), libvirt will make a "fake" reservation for one extra slot prior to assigning addresses to unaddressed PCI endpoint devices in the domain. This will trigger auto-adding of a pci-bridge for the final device to be assigned an address *if that device would have otherwise instead been the last device on the last available pci-bridge*; thus it assures that there will always be at least one slot left open in the domain's bus topology for expansion (which is important both for hotplug (since a new pci-bridge can't be added while the guest is running) as well as for offline additions to the config (since adding a new device might otherwise in some cases require re-addressing existing devices, which we want to avoid)). It's important to note that for the above case (legacy PCI), we must check for the special case of all slots on all buses being occupied *prior to assigning any addresses*, and avoid attempting to reserve the extra address in that case, because there is no free address in the existing topology, so no place to auto-add a pci-bridge for expansion (i.e. it would always fail anyway). Since that condition can only be reached by manual intervention, this is acceptable. For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's methodology for automatically expanding the bus topology is different - pcie-root-ports are plugged into slots (soon to be functions) of pcie-root as needed, and the new endpoint devices are assigned to the single slot in each pcie-root-port. This is done so that the devices are, by default, hotpluggable (the slots of pcie-root don't support hotplug, but the single slot of the pcie-root-port does). Since pcie-root-ports can only be plugged into pcie-root, and we don't auto-assign endpoint devices to the pcie-root slots, this means topology expansion doesn't compete with endpoint devices for slots, so we don't need to worry about checking for all "useful" slots being free *prior* to assigning addresses to new endpoint devices - as a matter of fact, if we attempt to reserve the open slots before the used slots, it can lead to errors. Instead this patch just reserves one slot for a "future potential" PCIe device after doing the assignment for actual devices, but only if the only PCI controller defined prior to starting address assignment was pcie-root, and only if we auto-added at least one PCI controller during address assignment. This assures two things: 1) that reserving the open slots will only be done when the domain is initially defined, never at any time after, and 2) that if the user understands enough about PCI controllers that they are adding them manually, that we don't mess up their plan by adding extras - if they know enough to add one pcie-root-port, or to manually assign addresses such that no pcie-root-ports are needed, they know enough to add extra pcie-root-ports if they want them (this could be called the "libguestfs clause", since libguestfs needs to be able to create domains with as few devices/controllers as possible). This is set to reserve a single free port for now, but could be increased in the future if public sentiment goes in that direction (it's easy to increase later, but essentially impossible to decrease)
2016-09-28 00:37:30 +00:00
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("q35-usb2-reorder",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
qemu: initially reserve one open pcie-root-port for hotplug For machinetypes with a pci-root bus (all legacy PCI), libvirt will make a "fake" reservation for one extra slot prior to assigning addresses to unaddressed PCI endpoint devices in the domain. This will trigger auto-adding of a pci-bridge for the final device to be assigned an address *if that device would have otherwise instead been the last device on the last available pci-bridge*; thus it assures that there will always be at least one slot left open in the domain's bus topology for expansion (which is important both for hotplug (since a new pci-bridge can't be added while the guest is running) as well as for offline additions to the config (since adding a new device might otherwise in some cases require re-addressing existing devices, which we want to avoid)). It's important to note that for the above case (legacy PCI), we must check for the special case of all slots on all buses being occupied *prior to assigning any addresses*, and avoid attempting to reserve the extra address in that case, because there is no free address in the existing topology, so no place to auto-add a pci-bridge for expansion (i.e. it would always fail anyway). Since that condition can only be reached by manual intervention, this is acceptable. For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's methodology for automatically expanding the bus topology is different - pcie-root-ports are plugged into slots (soon to be functions) of pcie-root as needed, and the new endpoint devices are assigned to the single slot in each pcie-root-port. This is done so that the devices are, by default, hotpluggable (the slots of pcie-root don't support hotplug, but the single slot of the pcie-root-port does). Since pcie-root-ports can only be plugged into pcie-root, and we don't auto-assign endpoint devices to the pcie-root slots, this means topology expansion doesn't compete with endpoint devices for slots, so we don't need to worry about checking for all "useful" slots being free *prior* to assigning addresses to new endpoint devices - as a matter of fact, if we attempt to reserve the open slots before the used slots, it can lead to errors. Instead this patch just reserves one slot for a "future potential" PCIe device after doing the assignment for actual devices, but only if the only PCI controller defined prior to starting address assignment was pcie-root, and only if we auto-added at least one PCI controller during address assignment. This assures two things: 1) that reserving the open slots will only be done when the domain is initially defined, never at any time after, and 2) that if the user understands enough about PCI controllers that they are adding them manually, that we don't mess up their plan by adding extras - if they know enough to add one pcie-root-port, or to manually assign addresses such that no pcie-root-ports are needed, they know enough to add extra pcie-root-ports if they want them (this could be called the "libguestfs clause", since libguestfs needs to be able to create domains with as few devices/controllers as possible). This is set to reserve a single free port for now, but could be increased in the future if public sentiment goes in that direction (it's easy to increase later, but essentially impossible to decrease)
2016-09-28 00:37:30 +00:00
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_QXL);
DO_TEST_CAPS_LATEST("q35-pcie");
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 18:38:47 +00:00
/* same as q35-pcie, but all PCI controllers are added automatically */
DO_TEST_CAPS_LATEST("q35-pcie-autoadd");
DO_TEST_CAPS_LATEST("q35-default-devices-only");
DO_TEST_CAPS_LATEST("q35-multifunction");
DO_TEST_CAPS_LATEST("q35-virt-manager-basic");
DO_TEST("pcie-root",
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_QXL);
/* Test automatic and manual setting of pcie-root-port attributes */
DO_TEST("pcie-root-port",
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_QXL);
/* Make sure the default model for PCIe Root Ports is picked correctly
* based on QEMU binary capabilities. We use x86/q35 for the test, but
* any PCIe machine type (such as aarch64/virt) will behave the same */
DO_TEST("pcie-root-port-model-generic",
QEMU_CAPS_DEVICE_PCIE_ROOT_PORT,
QEMU_CAPS_DEVICE_IOH3420);
DO_TEST("pcie-root-port-model-ioh3420",
QEMU_CAPS_DEVICE_IOH3420);
DO_TEST_CAPS_LATEST("pcie-root-port-nohotplug");
DO_TEST("pcie-switch-upstream-port",
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_X3130_UPSTREAM,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("pcie-switch-downstream-port",
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_X3130_UPSTREAM,
QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("pci-expander-bus",
QEMU_CAPS_DEVICE_PXB);
DO_TEST("pcie-expander-bus",
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_X3130_UPSTREAM,
QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
QEMU_CAPS_DEVICE_PXB_PCIE);
DO_TEST_CAPS_ARCH_LATEST("pcie-expander-bus-aarch64", "aarch64");
DO_TEST("autoindex",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_X3130_UPSTREAM,
QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_NEC_USB_XHCI);
/* Make sure the user can always override libvirt's default device
* placement policy by providing an explicit PCI address */
DO_TEST("q35-pci-force-address",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_HDA_DUPLEX);
DO_TEST("hostdev-scsi-vhost-scsi-ccw",
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_DEVICE_VHOST_SCSI);
DO_TEST("hostdev-scsi-vhost-scsi-pci",
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_DEVICE_VHOST_SCSI);
DO_TEST_CAPS_LATEST("hostdev-scsi-vhost-scsi-pcie");
DO_TEST("hostdev-scsi-lsi",
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_SCSI_LSI);
DO_TEST("hostdev-scsi-virtio-scsi",
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_SCSI_LSI);
DO_TEST("hostdev-scsi-shareable",
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_SCSI_LSI);
DO_TEST("hostdev-scsi-autogen-address",
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_SCSI_LSI);
DO_TEST("hostdev-scsi-large-unit",
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_SCSI_LSI);
DO_TEST("hostdev-subsys-mdev-vfio-ccw",
QEMU_CAPS_DEVICE_VFIO_CCW);
DO_TEST_CAPS_ARCH_LATEST("hostdev-subsys-mdev-vfio-ccw-boot",
"s390x");
DO_TEST("hostdev-subsys-mdev-vfio-ap",
QEMU_CAPS_DEVICE_VFIO_AP);
DO_TEST_CAPS_ARCH_LATEST("s390-defaultconsole", "s390x");
DO_TEST_NOCAPS("s390-panic");
DO_TEST_NOCAPS("s390-panic-missing");
DO_TEST_NOCAPS("s390-panic-no-address");
DO_TEST_NOCAPS("s390-serial");
DO_TEST_NOCAPS("s390-serial-2");
DO_TEST_NOCAPS("s390-serial-console");
DO_TEST_NOCAPS("pcihole64");
DO_TEST_NOCAPS("pcihole64-gib");
DO_TEST("pcihole64-q35",
qemu: initially reserve one open pcie-root-port for hotplug For machinetypes with a pci-root bus (all legacy PCI), libvirt will make a "fake" reservation for one extra slot prior to assigning addresses to unaddressed PCI endpoint devices in the domain. This will trigger auto-adding of a pci-bridge for the final device to be assigned an address *if that device would have otherwise instead been the last device on the last available pci-bridge*; thus it assures that there will always be at least one slot left open in the domain's bus topology for expansion (which is important both for hotplug (since a new pci-bridge can't be added while the guest is running) as well as for offline additions to the config (since adding a new device might otherwise in some cases require re-addressing existing devices, which we want to avoid)). It's important to note that for the above case (legacy PCI), we must check for the special case of all slots on all buses being occupied *prior to assigning any addresses*, and avoid attempting to reserve the extra address in that case, because there is no free address in the existing topology, so no place to auto-add a pci-bridge for expansion (i.e. it would always fail anyway). Since that condition can only be reached by manual intervention, this is acceptable. For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's methodology for automatically expanding the bus topology is different - pcie-root-ports are plugged into slots (soon to be functions) of pcie-root as needed, and the new endpoint devices are assigned to the single slot in each pcie-root-port. This is done so that the devices are, by default, hotpluggable (the slots of pcie-root don't support hotplug, but the single slot of the pcie-root-port does). Since pcie-root-ports can only be plugged into pcie-root, and we don't auto-assign endpoint devices to the pcie-root slots, this means topology expansion doesn't compete with endpoint devices for slots, so we don't need to worry about checking for all "useful" slots being free *prior* to assigning addresses to new endpoint devices - as a matter of fact, if we attempt to reserve the open slots before the used slots, it can lead to errors. Instead this patch just reserves one slot for a "future potential" PCIe device after doing the assignment for actual devices, but only if the only PCI controller defined prior to starting address assignment was pcie-root, and only if we auto-added at least one PCI controller during address assignment. This assures two things: 1) that reserving the open slots will only be done when the domain is initially defined, never at any time after, and 2) that if the user understands enough about PCI controllers that they are adding them manually, that we don't mess up their plan by adding extras - if they know enough to add one pcie-root-port, or to manually assign addresses such that no pcie-root-ports are needed, they know enough to add extra pcie-root-ports if they want them (this could be called the "libguestfs clause", since libguestfs needs to be able to create domains with as few devices/controllers as possible). This is set to reserve a single free port for now, but could be increased in the future if public sentiment goes in that direction (it's easy to increase later, but essentially impossible to decrease)
2016-09-28 00:37:30 +00:00
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("panic", QEMU_CAPS_DEVICE_PANIC);
DO_TEST("panic-double", QEMU_CAPS_DEVICE_PANIC);
DO_TEST("panic-no-address", QEMU_CAPS_DEVICE_PANIC);
DO_TEST_CAPS_ARCH_LATEST("panic-pseries", "ppc64");
DO_TEST_NOCAPS("disk-backing-chains-index");
DO_TEST_NOCAPS("disk-backing-chains-noindex");
DO_TEST_CAPS_LATEST("disk-network-http");
DO_TEST("chardev-label",
QEMU_CAPS_DEVICE_VIRTIO_RNG,
QEMU_CAPS_OBJECT_RNG_EGD);
DO_TEST_NOCAPS("cpu-numa1");
DO_TEST_NOCAPS("cpu-numa2");
DO_TEST_NOCAPS("cpu-numa-no-memory-element");
DO_TEST_NOCAPS("cpu-numa-disordered");
DO_TEST_NOCAPS("cpu-numa-disjoint");
DO_TEST_NOCAPS("cpu-numa-memshared");
DO_TEST_NOCAPS("numatune-auto-prefer");
DO_TEST_NOCAPS("numatune-memnode");
DO_TEST_NOCAPS("numatune-memnode-no-memory");
DO_TEST_NOCAPS("numatune-distances");
DO_TEST_NOCAPS("numatune-no-vcpu");
DO_TEST("numatune-hmat", QEMU_CAPS_NUMA_HMAT);
DO_TEST_CAPS_LATEST("numatune-memnode-restrictive-mode");
conf: support stateless UEFI firmware Normally when an UEFI firmware is marked as read-only, an associated NVRAM file will be created. Some builds of UEFI firmware, however, wish to remain stateless and so will be read-only, but never have any NVRAM file. To represent this concept a 'stateless' tristate bool attribute is introduced on the <loader/> element. There are rather a large number of permutations to consider. With default firmware selection * <os/> => Historic default, no change * <os> <loader stateless='yes'/> </os> => Explicit version of historic default, no change * <os> <loader stateless='no'/> </os> => Invalid, bios is always stateless With manual legacy BIOS selection * <os> <loader>/path/to/seabios</loader> ... </os> => Historic default, no change * <os> <loader stateless='yes'>/path/to/seabios</loader> ... </os> => Explicit version of historic default, no change * <os> <loader stateless='no'>/path/to/seabios</loader> ... </os> => Invalid, bios is always stateless With manual UEFI selection * <os> <loader type='pflash'>/path/to/edk2</loader> ... </os> => Historic default, no change * <os> <loader type='pflash' stateless='yes'>/path/to/edk2</loader> ... </os> => Skip auto-filling NVRAM / template * <os> <loader type='pflash' stateless='no'>/path/to/edk2</loader> ... </os> => Explicit version of historic default, no change With automatic firmware selection * <os firmware='bios'/> => Historic default, no change * <os firmware='bios'> <loader stateless='yes'/> </os> => Explicit version of historic default, no change * <os firmware='bios'> <loader stateless='no'/> </os> => Invalid, bios is always stateless * <os firmware='uefi'/> => Historic default, no change * <os firmware='uefi'> <loader stateless='yes'/> </os> => Skip auto-filling NVRAM / template * <os firmware='uefi'> <loader stateless='no'/> </os> => Explicit version of historic default, no change Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2022-07-22 14:27:55 +00:00
DO_TEST_NOCAPS("firmware-manual-bios");
DO_TEST_NOCAPS("firmware-manual-bios-stateless");
DO_TEST_NOCAPS("firmware-manual-efi");
DO_TEST_CAPS_LATEST("firmware-manual-efi-nvram-network-iscsi");
DO_TEST_CAPS_LATEST("firmware-manual-efi-nvram-network-nbd");
DO_TEST_CAPS_LATEST("firmware-manual-efi-nvram-file");
DO_TEST_CAPS_LATEST("firmware-auto-bios");
conf: support stateless UEFI firmware Normally when an UEFI firmware is marked as read-only, an associated NVRAM file will be created. Some builds of UEFI firmware, however, wish to remain stateless and so will be read-only, but never have any NVRAM file. To represent this concept a 'stateless' tristate bool attribute is introduced on the <loader/> element. There are rather a large number of permutations to consider. With default firmware selection * <os/> => Historic default, no change * <os> <loader stateless='yes'/> </os> => Explicit version of historic default, no change * <os> <loader stateless='no'/> </os> => Invalid, bios is always stateless With manual legacy BIOS selection * <os> <loader>/path/to/seabios</loader> ... </os> => Historic default, no change * <os> <loader stateless='yes'>/path/to/seabios</loader> ... </os> => Explicit version of historic default, no change * <os> <loader stateless='no'>/path/to/seabios</loader> ... </os> => Invalid, bios is always stateless With manual UEFI selection * <os> <loader type='pflash'>/path/to/edk2</loader> ... </os> => Historic default, no change * <os> <loader type='pflash' stateless='yes'>/path/to/edk2</loader> ... </os> => Skip auto-filling NVRAM / template * <os> <loader type='pflash' stateless='no'>/path/to/edk2</loader> ... </os> => Explicit version of historic default, no change With automatic firmware selection * <os firmware='bios'/> => Historic default, no change * <os firmware='bios'> <loader stateless='yes'/> </os> => Explicit version of historic default, no change * <os firmware='bios'> <loader stateless='no'/> </os> => Invalid, bios is always stateless * <os firmware='uefi'/> => Historic default, no change * <os firmware='uefi'> <loader stateless='yes'/> </os> => Skip auto-filling NVRAM / template * <os firmware='uefi'> <loader stateless='no'/> </os> => Explicit version of historic default, no change Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2022-07-22 14:27:55 +00:00
DO_TEST_CAPS_LATEST("firmware-auto-bios-stateless");
DO_TEST_CAPS_LATEST("firmware-auto-efi");
DO_TEST_CAPS_LATEST("firmware-auto-efi-nvram");
DO_TEST_CAPS_LATEST("firmware-auto-efi-loader-secure");
DO_TEST_CAPS_LATEST("firmware-auto-efi-secboot");
DO_TEST_CAPS_LATEST("firmware-auto-efi-no-secboot");
DO_TEST_CAPS_LATEST("firmware-auto-efi-enrolled-keys");
DO_TEST_CAPS_LATEST("firmware-auto-efi-no-enrolled-keys");
DO_TEST_CAPS_ARCH_LATEST("firmware-auto-efi-aarch64", "aarch64");
DO_TEST_NOCAPS("tap-vhost");
DO_TEST_NOCAPS("tap-vhost-incorrect");
DO_TEST("shmem", QEMU_CAPS_DEVICE_IVSHMEM);
DO_TEST("shmem-plain-doorbell",
QEMU_CAPS_DEVICE_IVSHMEM_PLAIN, QEMU_CAPS_DEVICE_IVSHMEM_DOORBELL);
DO_TEST_NOCAPS("smbios");
DO_TEST_NOCAPS("smbios-multiple-type2");
DO_TEST_NOCAPS("smbios-type-fwcfg");
DO_TEST("aarch64-aavmf-virtio-mmio",
QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM);
DO_TEST_CAPS_ARCH_LATEST("aarch64-virtio-pci-default", "aarch64");
DO_TEST("aarch64-virtio-pci-manual-addresses",
QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM,
QEMU_CAPS_OBJECT_GPEX, QEMU_CAPS_DEVICE_PCI_BRIDGE,
qemu: initially reserve one open pcie-root-port for hotplug For machinetypes with a pci-root bus (all legacy PCI), libvirt will make a "fake" reservation for one extra slot prior to assigning addresses to unaddressed PCI endpoint devices in the domain. This will trigger auto-adding of a pci-bridge for the final device to be assigned an address *if that device would have otherwise instead been the last device on the last available pci-bridge*; thus it assures that there will always be at least one slot left open in the domain's bus topology for expansion (which is important both for hotplug (since a new pci-bridge can't be added while the guest is running) as well as for offline additions to the config (since adding a new device might otherwise in some cases require re-addressing existing devices, which we want to avoid)). It's important to note that for the above case (legacy PCI), we must check for the special case of all slots on all buses being occupied *prior to assigning any addresses*, and avoid attempting to reserve the extra address in that case, because there is no free address in the existing topology, so no place to auto-add a pci-bridge for expansion (i.e. it would always fail anyway). Since that condition can only be reached by manual intervention, this is acceptable. For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's methodology for automatically expanding the bus topology is different - pcie-root-ports are plugged into slots (soon to be functions) of pcie-root as needed, and the new endpoint devices are assigned to the single slot in each pcie-root-port. This is done so that the devices are, by default, hotpluggable (the slots of pcie-root don't support hotplug, but the single slot of the pcie-root-port does). Since pcie-root-ports can only be plugged into pcie-root, and we don't auto-assign endpoint devices to the pcie-root slots, this means topology expansion doesn't compete with endpoint devices for slots, so we don't need to worry about checking for all "useful" slots being free *prior* to assigning addresses to new endpoint devices - as a matter of fact, if we attempt to reserve the open slots before the used slots, it can lead to errors. Instead this patch just reserves one slot for a "future potential" PCIe device after doing the assignment for actual devices, but only if the only PCI controller defined prior to starting address assignment was pcie-root, and only if we auto-added at least one PCI controller during address assignment. This assures two things: 1) that reserving the open slots will only be done when the domain is initially defined, never at any time after, and 2) that if the user understands enough about PCI controllers that they are adding them manually, that we don't mess up their plan by adding extras - if they know enough to add one pcie-root-port, or to manually assign addresses such that no pcie-root-ports are needed, they know enough to add extra pcie-root-ports if they want them (this could be called the "libguestfs clause", since libguestfs needs to be able to create domains with as few devices/controllers as possible). This is set to reserve a single free port for now, but could be increased in the future if public sentiment goes in that direction (it's easy to increase later, but essentially impossible to decrease)
2016-09-28 00:37:30 +00:00
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_VIRTIO_SCSI);
qemu: map "virtio" video model to "virt" machtype correctly (arm/aarch64) Most of QEMU's PCI display device models, such as: libvirt video/model/@type QEMU -device ------------------------- ------------ cirrus cirrus-vga vga VGA qxl qxl-vga virtio virtio-vga come with a linear framebuffer (sometimes called "VGA compatibility framebuffer"). This linear framebuffer lives in one of the PCI device's MMIO BARs, and allows guest code (primarily: firmware drivers, and non-accelerated OS drivers) to display graphics with direct memory access. Due to architectural reasons on aarch64/KVM hosts, this kind of framebuffer doesn't / can't work in qemu-system-(arm|aarch64) -M virt machines. Cache coherency issues guarantee a corrupted / unusable display. The problem has been researched by several people, including kvm-arm maintainers, and it's been decided that the best way (practically the only way) to have boot time graphics for such guests is to consolidate on QEMU's "virtio-gpu-pci" device. >From <https://bugzilla.redhat.com/show_bug.cgi?id=1195176>, libvirt supports <devices> <video> <model type='virtio'/> </video> </devices> but libvirt unconditionally maps @type='virtio' to QEMU's "virtio-vga" device model. (See the qemuBuildDeviceVideoStr() function and the "qemuDeviceVideo" enum impl.) According to the above, this is not right for the "virt" machine type; the qemu-system-(arm|aarch64) binaries don't even recognize the "virtio-vga" device model (justifiedly). Whereas "virtio-gpu-pci", which is a pure virtio device without a compatibility framebuffer, is available, and works fine. (The ArmVirtQemu ("AAVMF") platform of edk2 -- that is, the UEFI firmware for "virt" -- supports "virtio-gpu-pci", as of upstream commit 3ef3209d3028. See <https://tianocore.acgmultimedia.com/show_bug.cgi?id=66>.) Override the default mapping of "virtio", from "virtio-vga" to "virtio-gpu-pci", if qemuDomainMachineIsVirt() evaluates to true. Cc: Andrea Bolognani <abologna@redhat.com> Cc: Drew Jones <drjones@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Martin Kletzander <mkletzan@redhat.com> Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com> Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372901 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Martin Kletzander <mkletzan@redhat.com>
2016-09-16 07:30:23 +00:00
DO_TEST("aarch64-video-virtio-gpu-pci",
QEMU_CAPS_OBJECT_GPEX,
qemu: map "virtio" video model to "virt" machtype correctly (arm/aarch64) Most of QEMU's PCI display device models, such as: libvirt video/model/@type QEMU -device ------------------------- ------------ cirrus cirrus-vga vga VGA qxl qxl-vga virtio virtio-vga come with a linear framebuffer (sometimes called "VGA compatibility framebuffer"). This linear framebuffer lives in one of the PCI device's MMIO BARs, and allows guest code (primarily: firmware drivers, and non-accelerated OS drivers) to display graphics with direct memory access. Due to architectural reasons on aarch64/KVM hosts, this kind of framebuffer doesn't / can't work in qemu-system-(arm|aarch64) -M virt machines. Cache coherency issues guarantee a corrupted / unusable display. The problem has been researched by several people, including kvm-arm maintainers, and it's been decided that the best way (practically the only way) to have boot time graphics for such guests is to consolidate on QEMU's "virtio-gpu-pci" device. >From <https://bugzilla.redhat.com/show_bug.cgi?id=1195176>, libvirt supports <devices> <video> <model type='virtio'/> </video> </devices> but libvirt unconditionally maps @type='virtio' to QEMU's "virtio-vga" device model. (See the qemuBuildDeviceVideoStr() function and the "qemuDeviceVideo" enum impl.) According to the above, this is not right for the "virt" machine type; the qemu-system-(arm|aarch64) binaries don't even recognize the "virtio-vga" device model (justifiedly). Whereas "virtio-gpu-pci", which is a pure virtio device without a compatibility framebuffer, is available, and works fine. (The ArmVirtQemu ("AAVMF") platform of edk2 -- that is, the UEFI firmware for "virt" -- supports "virtio-gpu-pci", as of upstream commit 3ef3209d3028. See <https://tianocore.acgmultimedia.com/show_bug.cgi?id=66>.) Override the default mapping of "virtio", from "virtio-vga" to "virtio-gpu-pci", if qemuDomainMachineIsVirt() evaluates to true. Cc: Andrea Bolognani <abologna@redhat.com> Cc: Drew Jones <drjones@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Martin Kletzander <mkletzan@redhat.com> Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com> Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372901 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Martin Kletzander <mkletzan@redhat.com>
2016-09-16 07:30:23 +00:00
QEMU_CAPS_DEVICE_PCI_BRIDGE, QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_VIRTIO_GPU);
DO_TEST("aarch64-pci-serial",
QEMU_CAPS_DEVICE_PCI_SERIAL,
QEMU_CAPS_OBJECT_GPEX,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PCIE_ROOT_PORT);
DO_TEST("aarch64-traditional-pci",
QEMU_CAPS_OBJECT_GPEX,
QEMU_CAPS_DEVICE_PCIE_ROOT_PORT,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PCIE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PCI_SERIAL);
DO_TEST("aarch64-video-default",
QEMU_CAPS_OBJECT_GPEX,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_VIRTIO_GPU,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_VNC);
DO_TEST_FULL("aarch64-gic-none", "", WHEN_BOTH, ARG_GIC, GIC_NONE, ARG_END);
DO_TEST_FULL("aarch64-gic-none-v2", "", WHEN_BOTH, ARG_GIC, GIC_V2, ARG_END);
DO_TEST_FULL("aarch64-gic-none-v3", "", WHEN_BOTH, ARG_GIC, GIC_V3, ARG_END);
DO_TEST_FULL("aarch64-gic-none-both", "", WHEN_BOTH, ARG_GIC, GIC_BOTH, ARG_END);
DO_TEST_FULL("aarch64-gic-none-tcg", "", WHEN_BOTH, ARG_GIC, GIC_BOTH, ARG_END);
DO_TEST_FULL("aarch64-gic-default", "", WHEN_BOTH, ARG_GIC, GIC_NONE, ARG_END);
DO_TEST_FULL("aarch64-gic-default-v2", "", WHEN_BOTH, ARG_GIC, GIC_V2, ARG_END);
DO_TEST_FULL("aarch64-gic-default-v3", "", WHEN_BOTH, ARG_GIC, GIC_V3, ARG_END);
DO_TEST_FULL("aarch64-gic-default-both", "", WHEN_BOTH, ARG_GIC, GIC_BOTH, ARG_END);
DO_TEST_FULL("aarch64-gic-v2", "", WHEN_BOTH, ARG_GIC, GIC_NONE, ARG_END);
DO_TEST_FULL("aarch64-gic-v2", "", WHEN_BOTH, ARG_GIC, GIC_V2, ARG_END);
DO_TEST_FULL("aarch64-gic-v2", "", WHEN_BOTH, ARG_GIC, GIC_V3, ARG_END);
DO_TEST_FULL("aarch64-gic-v2", "", WHEN_BOTH, ARG_GIC, GIC_BOTH, ARG_END);
DO_TEST_FULL("aarch64-gic-v3", "", WHEN_BOTH, ARG_GIC, GIC_NONE, ARG_END);
DO_TEST_FULL("aarch64-gic-v3", "", WHEN_BOTH, ARG_GIC, GIC_V2, ARG_END);
DO_TEST_FULL("aarch64-gic-v3", "", WHEN_BOTH, ARG_GIC, GIC_V3, ARG_END);
DO_TEST_FULL("aarch64-gic-v3", "", WHEN_BOTH, ARG_GIC, GIC_BOTH, ARG_END);
DO_TEST_FULL("aarch64-gic-host", "", WHEN_BOTH, ARG_GIC, GIC_NONE, ARG_END);
DO_TEST_FULL("aarch64-gic-host", "", WHEN_BOTH, ARG_GIC, GIC_V2, ARG_END);
DO_TEST_FULL("aarch64-gic-host", "", WHEN_BOTH, ARG_GIC, GIC_V3, ARG_END);
DO_TEST_FULL("aarch64-gic-host", "", WHEN_BOTH, ARG_GIC, GIC_BOTH, ARG_END);
/* SVE aarch64 CPU features work on modern QEMU */
DO_TEST_CAPS_ARCH_LATEST("aarch64-features-sve", "aarch64");
DO_TEST("memory-hotplug-ppc64-nonuma", QEMU_CAPS_KVM, QEMU_CAPS_DEVICE_PC_DIMM,
QEMU_CAPS_DEVICE_SPAPR_PCI_HOST_BRIDGE);
DO_TEST_FULL("memory-hotplug-ppc64-nonuma-abi-update", "", WHEN_BOTH,
qemu_domain.c: align all pSeries mem modules when PARSE_ABI_UPDATE qemuDomainAlignMemorySizes() has an operation order problem. We are calculating 'initialmem' without aligning the memory modules first. Since we're aligning the dimms afterwards this can create inconsistencies in the end result. x86 has alignment of 1-2MiB and it's not severely impacted by it, but pSeries works with 256MiB alignment and the difference is noticeable. This is the case of the existing 'memory-hotplug-ppc64-nonuma' test. The test consists of a 2GiB (aligned value) guest with 2 ~520MiB dimms, both unaligned. 'initialmem' is calculated by taking total_mem and subtracting the dimms size (via virDomainDefGetMemoryInitial()), which wil give us 2GiB - 520MiB - 520MiB, ending up with a little more than an 1GiB of 'initialmem'. Note that this value is now unaligned, and will be aligned up via VIR_ROUND_UP(), and we'll end up with 'initialmem' of 1GiB + 256MiB. Given that the dimms are aligned later on, the end result for QEMU is that the guest will have a 'mem' size of 1310720k, plus the two 512 MiB dimms, exceeding in 256MiB the desired 2GiB memory and currentMemory specified in the XML. Existing guests can't be fixed without breaking ABI, but we have code already in place to align pSeries NVDIMM modules for new guests. Let's extend it to align all pSeries mem modules. A new test, 'memory-hotplug-ppc64-nonuma-abi-update', a copy of the existing 'memory-hotplug-ppc64-nonuma', was added to demonstrate the result for new pSeries guests. For the same unaligned XML mentioned above, after applying this patch: - starting QEMU mem size without PARSE_ABI_UPDATE: -m size=1310720k,slots=16,maxmem=4194304k \ (no changes) - starting QEMU mem size with PARSE_ABI_UPDATE: -m size=1048576k,slots=16,maxmem=4194304k \ (size fixed) Reviewed-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-11-18 19:58:34 +00:00
ARG_PARSEFLAGS, VIR_DOMAIN_DEF_PARSE_ABI_UPDATE,
ARG_QEMU_CAPS,
QEMU_CAPS_KVM, QEMU_CAPS_DEVICE_PC_DIMM,
QEMU_CAPS_DEVICE_SPAPR_PCI_HOST_BRIDGE,
QEMU_CAPS_LAST, ARG_END);
DO_TEST_NOCAPS("memory-hotplug");
DO_TEST("memory-hotplug-dimm", QEMU_CAPS_DEVICE_PC_DIMM);
DO_TEST_CAPS_LATEST("memory-hotplug-dimm-addr");
DO_TEST("memory-hotplug-nvdimm", QEMU_CAPS_DEVICE_NVDIMM);
DO_TEST("memory-hotplug-nvdimm-access", QEMU_CAPS_DEVICE_NVDIMM);
DO_TEST("memory-hotplug-nvdimm-label", QEMU_CAPS_DEVICE_NVDIMM);
DO_TEST("memory-hotplug-nvdimm-align", QEMU_CAPS_DEVICE_NVDIMM);
DO_TEST("memory-hotplug-nvdimm-pmem", QEMU_CAPS_DEVICE_NVDIMM);
DO_TEST("memory-hotplug-nvdimm-readonly", QEMU_CAPS_DEVICE_NVDIMM,
QEMU_CAPS_DEVICE_NVDIMM_UNARMED);
DO_TEST("memory-hotplug-nvdimm-ppc64", QEMU_CAPS_DEVICE_SPAPR_PCI_HOST_BRIDGE,
QEMU_CAPS_DEVICE_NVDIMM);
DO_TEST_FULL("memory-hotplug-nvdimm-ppc64-abi-update", "", WHEN_BOTH,
ARG_PARSEFLAGS, VIR_DOMAIN_DEF_PARSE_ABI_UPDATE,
ARG_QEMU_CAPS,
QEMU_CAPS_DEVICE_SPAPR_PCI_HOST_BRIDGE,
QEMU_CAPS_DEVICE_NVDIMM,
QEMU_CAPS_LAST, ARG_END);
DO_TEST_CAPS_LATEST("memory-hotplug-virtio-pmem");
conf: Introduce virtio-mem <memory/> model The virtio-mem is paravirtualized mechanism of adding/removing memory to/from a VM. A virtio-mem-pci device is split into blocks of equal size which are then exposed (all or only a requested portion of them) to the guest kernel to use as regular memory. Therefore, the device has two important attributes: 1) block-size, which defines the size of a block 2) requested-size, which defines how much memory (in bytes) is the device requested to expose to the guest. The 'block-size' is configured on command line and immutable throughout device's lifetime. The 'requested-size' can be set on the command line too, but also is adjustable via monitor. In fact, that is how management software places its requests to change the memory allocation. If it wants to give more memory to the guest it changes 'requested-size' to a bigger value, and if it wants to shrink guest memory it changes the 'requested-size' to a smaller value. Note, value of zero means that guest should release all memory offered by the device. Of course, guest has to cooperate. Therefore, there is a third attribute 'size' which is read only and reflects how much memory the guest still has. This can be different to 'requested-size', obviously. Because of name clash, I've named it 'current' and it is dealt with in future commits (it is a runtime information anyway). In the backend, memory for virtio-mem is backed by usual objects: memory-backend-{ram,file,memfd} and their size puts the cap on the amount of memory that a virtio-mem device can offer to a guest. But we are already able to express this info using <size/> under <target/>. Therefore, we need only two more elements to cover 'block-size' and 'requested-size' attributes. This is the XML I've came up with: <memory model='virtio-mem'> <source> <nodemask>1-3</nodemask> <pagesize unit='KiB'>2048</pagesize> </source> <target> <size unit='KiB'>2097152</size> <node>0</node> <block unit='KiB'>2048</block> <requested unit='KiB'>1048576</requested> </target> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memory> I hope by now it is obvious that: 1) 'requested-size' must be an integer multiple of 'block-size', and 2) virtio-mem-pci device goes onto PCI bus and thus needs PCI address. Then there is a limitation that the minimal 'block-size' is transparent huge page size (I'll leave this without explanation). Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-01-18 15:13:12 +00:00
DO_TEST_CAPS_LATEST("memory-hotplug-virtio-mem");
DO_TEST_NOCAPS("net-udp");
DO_TEST("video-virtio-gpu-device", QEMU_CAPS_DEVICE_VIRTIO_GPU);
DO_TEST("video-virtio-gpu-virgl",
QEMU_CAPS_DEVICE_VIRTIO_GPU,
QEMU_CAPS_VIRTIO_GPU_VIRGL);
DO_TEST("video-virtio-gpu-spice-gl",
QEMU_CAPS_DEVICE_VIRTIO_GPU,
QEMU_CAPS_VIRTIO_GPU_VIRGL,
QEMU_CAPS_SPICE,
QEMU_CAPS_SPICE_GL,
QEMU_CAPS_SPICE_RENDERNODE);
DO_TEST("video-virtio-gpu-sdl-gl",
QEMU_CAPS_DEVICE_VIRTIO_GPU,
QEMU_CAPS_VIRTIO_GPU_VIRGL,
QEMU_CAPS_SDL);
DO_TEST("virtio-input",
QEMU_CAPS_VIRTIO_KEYBOARD,
QEMU_CAPS_VIRTIO_MOUSE,
QEMU_CAPS_VIRTIO_TABLET);
DO_TEST("virtio-input-passthrough",
QEMU_CAPS_VIRTIO_INPUT_HOST);
DO_TEST_CAPS_LATEST("input-linux");
DO_TEST_NOCAPS("memorybacking-set");
DO_TEST_NOCAPS("memorybacking-unset");
DO_TEST_CAPS_LATEST("virtio-options");
DO_TEST("fd-memory-numa-topology", QEMU_CAPS_KVM);
DO_TEST("fd-memory-numa-topology2", QEMU_CAPS_KVM);
DO_TEST("fd-memory-numa-topology3", QEMU_CAPS_KVM);
DO_TEST_CAPS_LATEST("fd-memory-numa-topology4");
DO_TEST("fd-memory-no-numa-topology", QEMU_CAPS_KVM);
DO_TEST_CAPS_LATEST("memfd-memory-numa");
DO_TEST_CAPS_LATEST("memfd-memory-default-hugepage");
DO_TEST_NOCAPS("acpi-table");
DO_TEST("video-device-pciaddr-default",
QEMU_CAPS_KVM,
QEMU_CAPS_VNC,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("video-qxl-heads", QEMU_CAPS_DEVICE_QXL);
DO_TEST("video-qxl-noheads", QEMU_CAPS_DEVICE_QXL);
DO_TEST("video-qxl-resolution", QEMU_CAPS_DEVICE_QXL);
DO_TEST("video-virtio-gpu-secondary", QEMU_CAPS_DEVICE_VIRTIO_GPU);
DO_TEST("video-virtio-gpu-ccw",
QEMU_CAPS_DEVICE_VIRTIO_GPU,
QEMU_CAPS_VNC,
QEMU_CAPS_DEVICE_VIRTIO_GPU_CCW);
DO_TEST("video-virtio-gpu-ccw-auto",
QEMU_CAPS_DEVICE_VIRTIO_GPU,
QEMU_CAPS_VNC,
QEMU_CAPS_DEVICE_VIRTIO_GPU_CCW);
DO_TEST("video-none-device", QEMU_CAPS_VNC);
DO_TEST_CAPS_LATEST("video-virtio-vga-gpu-gl");
DO_TEST_CAPS_LATEST("intel-iommu");
DO_TEST_CAPS_LATEST("intel-iommu-caching-mode");
DO_TEST_CAPS_LATEST("intel-iommu-eim");
DO_TEST_CAPS_LATEST("intel-iommu-device-iotlb");
DO_TEST_CAPS_LATEST("intel-iommu-aw-bits");
DO_TEST_CAPS_ARCH_LATEST("iommu-smmuv3", "aarch64");
DO_TEST_CAPS_LATEST("virtio-iommu-x86_64");
DO_TEST_CAPS_ARCH_LATEST("virtio-iommu-aarch64", "aarch64");
DO_TEST_NOCAPS("cpu-check-none");
DO_TEST_NOCAPS("cpu-check-partial");
DO_TEST_NOCAPS("cpu-check-full");
DO_TEST_NOCAPS("cpu-check-default-none");
DO_TEST_NOCAPS("cpu-check-default-none2");
DO_TEST_NOCAPS("cpu-check-default-partial");
DO_TEST_NOCAPS("cpu-check-default-partial2");
DO_TEST("vmcoreinfo", QEMU_CAPS_DEVICE_VMCOREINFO);
DO_TEST("smartcard-host", QEMU_CAPS_CCID_EMULATED);
DO_TEST("smartcard-host-certificates", QEMU_CAPS_CCID_EMULATED);
DO_TEST("smartcard-host-certificates-database",
QEMU_CAPS_CCID_EMULATED);
DO_TEST("smartcard-passthrough-tcp", QEMU_CAPS_CCID_PASSTHRU);
DO_TEST("smartcard-passthrough-spicevmc",
QEMU_CAPS_CCID_PASSTHRU,
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("smartcard-controller", QEMU_CAPS_CCID_EMULATED);
DO_TEST_CAPS_ARCH_LATEST("pseries-cpu-compat-power9", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-cpu-compat-power10", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-cpu-compat", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("pseries-cpu-exact", "ppc64");
DO_TEST_CAPS_LATEST("user-aliases");
DO_TEST("input-virtio-ccw",
QEMU_CAPS_VIRTIO_KEYBOARD,
QEMU_CAPS_VIRTIO_MOUSE,
QEMU_CAPS_VIRTIO_TABLET,
QEMU_CAPS_DEVICE_VIRTIO_KEYBOARD_CCW,
QEMU_CAPS_DEVICE_VIRTIO_MOUSE_CCW,
QEMU_CAPS_DEVICE_VIRTIO_TABLET_CCW);
DO_TEST_CAPS_LATEST("tseg-explicit-size");
DO_TEST_CAPS_LATEST("vhost-vsock");
DO_TEST_CAPS_LATEST("vhost-vsock-auto");
DO_TEST("vhost-vsock-ccw", QEMU_CAPS_DEVICE_VHOST_VSOCK);
DO_TEST("vhost-vsock-ccw-auto", QEMU_CAPS_DEVICE_VHOST_VSOCK);
DO_TEST_CAPS_ARCH_LATEST("vhost-vsock-ccw-iommu", "s390x");
DO_TEST_CAPS_LATEST("vhost-user-fs-fd-memory");
DO_TEST_CAPS_LATEST("vhost-user-fs-hugepages");
DO_TEST_CAPS_LATEST("vhost-user-fs-sock");
DO_TEST("riscv64-virt",
QEMU_CAPS_DEVICE_VIRTIO_MMIO);
DO_TEST("riscv64-virt-pci",
QEMU_CAPS_OBJECT_GPEX);
DO_TEST_CAPS_LATEST("x86-kvm-32-on-64");
DO_TEST_CAPS_LATEST("virtio-transitional");
DO_TEST_CAPS_LATEST("virtio-non-transitional");
/* Simple headless guests for various architectures */
DO_TEST_CAPS_ARCH_LATEST("aarch64-virt-headless", "aarch64");
DO_TEST_CAPS_ARCH_LATEST("ppc64-pseries-headless", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("riscv64-virt-headless", "riscv64");
DO_TEST_CAPS_ARCH_LATEST("s390x-ccw-headless", "s390x");
DO_TEST_CAPS_ARCH_LATEST("x86_64-pc-headless", "x86_64");
DO_TEST_CAPS_ARCH_LATEST("x86_64-q35-headless", "x86_64");
/* Simple guests with graphics for various architectures */
DO_TEST_CAPS_ARCH_LATEST("aarch64-virt-graphics", "aarch64");
DO_TEST_CAPS_ARCH_LATEST("ppc64-pseries-graphics", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("riscv64-virt-graphics", "riscv64");
DO_TEST_CAPS_ARCH_LATEST("s390x-ccw-graphics", "s390x");
DO_TEST_CAPS_ARCH_LATEST("x86_64-pc-graphics", "x86_64");
DO_TEST_CAPS_ARCH_LATEST("x86_64-q35-graphics", "x86_64");
DO_TEST_CAPS_LATEST("cpu-Icelake-Server-pconfig");
DO_TEST_CAPS_ARCH_LATEST("aarch64-default-cpu-kvm-virt-4.2", "aarch64");
DO_TEST_CAPS_ARCH_LATEST("aarch64-default-cpu-tcg-virt-4.2", "aarch64");
DO_TEST_CAPS_ARCH_LATEST("ppc64-default-cpu-kvm-pseries-2.7", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("ppc64-default-cpu-tcg-pseries-2.7", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("ppc64-default-cpu-kvm-pseries-3.1", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("ppc64-default-cpu-tcg-pseries-3.1", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("ppc64-default-cpu-kvm-pseries-4.2", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("ppc64-default-cpu-tcg-pseries-4.2", "ppc64");
DO_TEST_CAPS_ARCH_LATEST("s390-default-cpu-kvm-ccw-virtio-2.7", "s390x");
DO_TEST_CAPS_ARCH_LATEST("s390-default-cpu-tcg-ccw-virtio-2.7", "s390x");
DO_TEST_CAPS_ARCH_LATEST("s390-default-cpu-kvm-ccw-virtio-4.2", "s390x");
DO_TEST_CAPS_ARCH_LATEST("s390-default-cpu-tcg-ccw-virtio-4.2", "s390x");
DO_TEST_CAPS_ARCH_LATEST("x86_64-default-cpu-kvm-pc-4.2", "x86_64");
DO_TEST_CAPS_ARCH_LATEST("x86_64-default-cpu-tcg-pc-4.2", "x86_64");
DO_TEST_CAPS_ARCH_LATEST("x86_64-default-cpu-kvm-q35-4.2", "x86_64");
DO_TEST_CAPS_ARCH_LATEST("x86_64-default-cpu-tcg-q35-4.2", "x86_64");
DO_TEST_CAPS_ARCH_LATEST("x86_64-default-cpu-tcg-features", "x86_64");
DO_TEST_CAPS_LATEST("virtio-9p-multidevs");
DO_TEST_CAPS_LATEST("virtio-9p-createmode");
DO_TEST_NOCAPS("downscript");
/* Simplest possible <audio>, all supported with ENV */
DO_TEST_NOCAPS("audio-none-minimal");
DO_TEST_NOCAPS("audio-alsa-minimal");
DO_TEST_NOCAPS("audio-coreaudio-minimal");
DO_TEST_NOCAPS("audio-oss-minimal");
DO_TEST_NOCAPS("audio-pulseaudio-minimal");
DO_TEST_NOCAPS("audio-sdl-minimal");
DO_TEST("audio-spice-minimal",
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST_NOCAPS("audio-file-minimal");
/* Best <audio> still compat with old ENV */
DO_TEST_NOCAPS("audio-none-best");
DO_TEST_NOCAPS("audio-alsa-best");
DO_TEST_NOCAPS("audio-coreaudio-best");
DO_TEST_NOCAPS("audio-oss-best");
DO_TEST_NOCAPS("audio-pulseaudio-best");
DO_TEST_NOCAPS("audio-sdl-best");
DO_TEST("audio-spice-best",
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST_NOCAPS("audio-file-best");
/* Full <audio> only compat with new QEMU -audiodev args */
DO_TEST_NOCAPS("audio-none-full");
DO_TEST_NOCAPS("audio-alsa-full");
DO_TEST_NOCAPS("audio-coreaudio-full");
DO_TEST_NOCAPS("audio-jack-full");
DO_TEST_NOCAPS("audio-oss-full");
DO_TEST_NOCAPS("audio-pulseaudio-full");
DO_TEST_NOCAPS("audio-sdl-full");
DO_TEST("audio-spice-full",
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST_NOCAPS("audio-file-full");
DO_TEST_CAPS_LATEST("audio-many-backends");
/* Validate auto-creation of <audio> for legacy compat */
g_setenv("QEMU_AUDIO_DRV", "sdl", TRUE);
g_setenv("SDL_AUDIODRIVER", "esd", TRUE);
DO_TEST_CAPS_LATEST("audio-default-sdl");
g_unsetenv("QEMU_AUDIO_DRV");
g_unsetenv("SDL_AUDIODRIVER");
g_setenv("QEMU_AUDIO_DRV", "alsa", TRUE);
driver.config->vncAllowHostAudio = true;
DO_TEST_CAPS_LATEST("audio-default-vnc");
driver.config->vncAllowHostAudio = false;
g_unsetenv("QEMU_AUDIO_DRV");
DO_TEST_CAPS_LATEST("audio-default-spice");
g_setenv("QEMU_AUDIO_DRV", "alsa", TRUE);
driver.config->nogfxAllowHostAudio = true;
DO_TEST_CAPS_LATEST("audio-default-nographics");
driver.config->nogfxAllowHostAudio = false;
g_unsetenv("QEMU_AUDIO_DRV");
DO_TEST_CAPS_LATEST("devices-acpi-index");
DO_TEST_MACOS("hvf-x86_64-q35-headless",
QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL,
QEMU_CAPS_DEVICE_PCIE_ROOT_PORT,
QEMU_CAPS_DEVICE_VIRTIO_NET,
QEMU_CAPS_DEVICE_ISA_SERIAL,
QEMU_CAPS_DEVICE_VIRTIO_RNG,
QEMU_CAPS_OBJECT_RNG_RANDOM);
DO_TEST_MACOS("hvf-aarch64-virt-headless",
QEMU_CAPS_OBJECT_GPEX,
QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL,
QEMU_CAPS_DEVICE_PCIE_ROOT_PORT,
QEMU_CAPS_DEVICE_VIRTIO_NET,
QEMU_CAPS_DEVICE_PL011,
QEMU_CAPS_DEVICE_VIRTIO_RNG,
QEMU_CAPS_OBJECT_RNG_RANDOM);
DO_TEST_CAPS_LATEST("channel-qemu-vdagent");
DO_TEST_CAPS_LATEST("channel-qemu-vdagent-features");
DO_TEST_CAPS_VER("sgx-epc", "7.0.0");
cleanup:
if (getenv("LIBVIRT_SKIP_CLEANUP") == NULL)
virFileDeleteTree(fakerootdir);
qemuTestDriverFree(&driver);
virFileWrapperClearPrefixes();
2007-07-18 21:34:22 +00:00
return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE;
2007-07-18 21:34:22 +00:00
}
VIR_TEST_MAIN_PRELOAD(mymain,
VIR_TEST_MOCK("virpci"),
VIR_TEST_MOCK("virrandom"),
VIR_TEST_MOCK("domaincaps"))