libvirt/daemon/Makefile.am

421 lines
12 KiB
Makefile
Raw Normal View History

2007-02-14 01:40:09 +00:00
## Process this file with automake to produce Makefile.in
## Copyright (C) 2005-2013 Red Hat, Inc.
## See COPYING.LIB for the License of this software
INCLUDES = \
-I$(top_builddir)/gnulib/lib -I$(top_srcdir)/gnulib/lib \
-I$(top_builddir)/include -I$(top_srcdir)/include \
-I$(top_builddir)/src -I$(top_srcdir)/src \
-I$(top_srcdir)/src/util \
-I$(top_srcdir)/src/conf \
-I$(top_srcdir)/src/rpc \
-I$(top_srcdir)/src/remote \
$(GETTEXT_CPPFLAGS)
Add dtrace static probes in libvirtd Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
2010-09-14 16:30:32 +00:00
CLEANFILES =
DAEMON_GENERATED = \
$(srcdir)/remote_dispatch.h \
$(srcdir)/lxc_dispatch.h \
$(srcdir)/qemu_dispatch.h \
$(NULL)
DAEMON_SOURCES = \
libvirtd.c libvirtd.h \
libvirtd-config.c libvirtd-config.h \
remote.c remote.h \
stream.c stream.h \
../src/remote/remote_protocol.c \
../src/remote/lxc_protocol.c \
../src/remote/qemu_protocol.c \
$(DAEMON_GENERATED)
DISTCLEANFILES =
EXTRA_DIST = \
remote_dispatch.h \
lxc_dispatch.h \
qemu_dispatch.h \
libvirtd.conf \
libvirtd.init.in \
libvirtd.upstart \
libvirtd.policy.in \
libvirtd.sasl \
libvirtd.service.in \
libvirtd.sysconf \
libvirtd.sysctl \
libvirtd.aug \
libvirtd.logrotate.in \
libvirtd.qemu.logrotate.in \
libvirtd.lxc.logrotate.in \
libvirtd.uml.logrotate.in \
test_libvirtd.aug.in \
THREADS.txt \
libvirtd.pod.in \
libvirtd.8.in \
$(DAEMON_SOURCES)
BUILT_SOURCES =
REMOTE_PROTOCOL = $(top_srcdir)/src/remote/remote_protocol.x
LXC_PROTOCOL = $(top_srcdir)/src/remote/lxc_protocol.x
QEMU_PROTOCOL = $(top_srcdir)/src/remote/qemu_protocol.x
$(srcdir)/remote_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
$(REMOTE_PROTOCOL)
$(AM_V_GEN)$(PERL) -w $(srcdir)/../src/rpc/gendispatch.pl -b remote REMOTE \
$(REMOTE_PROTOCOL) > $@
$(srcdir)/lxc_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
$(LXC_PROTOCOL)
$(AM_V_GEN)$(PERL) -w $(srcdir)/../src/rpc/gendispatch.pl -b lxc LXC \
$(LXC_PROTOCOL) > $@
$(srcdir)/qemu_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
$(QEMU_PROTOCOL)
$(AM_V_GEN)$(PERL) -w $(srcdir)/../src/rpc/gendispatch.pl -b qemu QEMU \
$(QEMU_PROTOCOL) > $@
if WITH_LIBVIRTD
man8_MANS = libvirtd.8
sbin_PROGRAMS = libvirtd
confdir = $(sysconfdir)/libvirt/
conf_DATA = libvirtd.conf
augeasdir = $(datadir)/augeas/lenses
augeas_DATA = libvirtd.aug
augeastestsdir = $(datadir)/augeas/lenses/tests
augeastests_DATA = test_libvirtd.aug
CLEANFILES += test_libvirtd.aug
libvirtd.8: $(srcdir)/libvirtd.8.in
$(AM_V_GEN)sed \
-e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
libvirtd_SOURCES = $(DAEMON_SOURCES)
2007-02-14 01:40:09 +00:00
#-D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED=1 -D_POSIX_C_SOURCE=199506L
2007-06-26 23:04:49 +00:00
libvirtd_CFLAGS = \
$(LIBXML_CFLAGS) $(GNUTLS_CFLAGS) $(SASL_CFLAGS) \
$(XDR_CFLAGS) $(POLKIT_CFLAGS) $(DBUS_CFLAGS) $(LIBNL_CFLAGS) \
maint: use gnulib configmake rather than open-coding things * bootstrap.conf (gnulib_modules): Add configmake. * daemon/Makefile.am (libvirtd_CFLAGS): Drop defines provided by gnulib. * src/Makefile.am (INCLUDES): Likewise. * tests/Makefile.am (INCLUDES): Likewise. * tools/Makefile.am (virsh_CFLAGS): Likewise. * daemon/libvirtd.c (qemudInitPaths, usage, main): Update clients. * src/cpu/cpu_map.c (CPUMAPFILE): Likewise. * src/driver.c (DEFAULT_DRIVER_DIR): Likewise. * src/internal.h (_): Likewise. * src/libvirt.c (virInitialize): Likewise. * src/lxc/lxc_conf.h (LXC_CONFIG_DIR, LXC_STATE_DIR, LXC_LOG_DIR): Likewise. * src/lxc/lxc_conf.c (lxcCapsInit, lxcLoadDriverConfig): Likewise. * src/network/bridge_driver.c (NETWORK_PID_DIR) (NETWORK_STATE_DIR, DNSMASQ_STATE_DIR, networkStartup): Likewise. * src/nwfilter/nwfilter_driver.c (nwfilterDriverStartup): Likewise. * src/qemu/qemu_conf.c (qemudLoadDriverConfig): Likewise. * src/qemu/qemu_driver.c (qemudStartup): Likewise. * src/remote/remote_driver.h (LIBVIRTD_PRIV_UNIX_SOCKET) (LIBVIRTD_PRIV_UNIX_SOCKET_RO, LIBVIRTD_CONFIGURATION_FILE) (LIBVIRT_PKI_DIR): Likewise. * src/secret/secret_driver.c (secretDriverStartup): Likewise. * src/security/security_apparmor.c (VIRT_AA_HELPER): Likewise. * src/security/virt-aa-helper.c (main): Likewise. * src/storage/storage_backend_disk.c (PARTHELPER): Likewise. * src/storage/storage_driver.c (storageDriverStartup): Likewise. * src/uml/uml_driver.c (TEMPDIR, umlStartup): Likewise. * src/util/hooks.c (LIBVIRT_HOOK_DIR): Likewise. * tools/virsh.c (main): Likewise. * docs/hooks.html.in: Likewise.
2010-11-16 14:54:17 +00:00
$(WARN_CFLAGS) \
$(COVERAGE_CFLAGS) \
-DQEMUD_PID_FILE="\"$(QEMUD_PID_FILE)\""
libvirtd_LDFLAGS = \
$(WARN_CFLAGS) \
2008-12-08 12:04:27 +00:00
$(COVERAGE_LDFLAGS)
libvirtd_LDADD = \
2008-12-08 12:04:27 +00:00
$(LIBXML_LIBS) \
$(GNUTLS_LIBS) \
$(SASL_LIBS) \
$(DBUS_LIBS) \
$(POLKIT_LIBS) \
$(LIBNL_LIBS)
if WITH_DTRACE_PROBES
libvirtd_LDADD += ../src/libvirt_probes.lo
Rewrite all the DTrace/SystemTAP probing The libvirtd daemon had a few crude system tap probes. Some of these were broken during the RPC rewrite. The new modular RPC code is structured in a way that allows much more effective tracing. Instead of trying to hook up the original probes, define a new set of probes for the RPC and event code. The master probes file is now src/probes.d. This contains probes for virNetServerClientPtr, virNetClientPtr, virSocketPtr virNetTLSContextPtr and virNetTLSSessionPtr modules. Also add probes for the poll event loop. The src/dtrace2systemtap.pl script can convert the probes.d file into a libvirt_probes.stp file to make use from systemtap much simpler. The src/rpc/gensystemtap.pl script can generate a set of systemtap functions for translating RPC enum values into printable strings. This works for all RPC header enums (program, type, status, procedure) and also the authentication enum The PROBE macro will automatically generate a VIR_DEBUG statement, so any place with a PROBE can remove any existing manual DEBUG statements. * daemon/libvirtd.stp, daemon/probes.d: Remove obsolete probing * daemon/libvirtd.h: Remove probe macros * daemon/Makefile.am: Remove all probe buildings/install * daemon/remote.c: Update authentication probes * src/dtrace2systemtap.pl, src/rpc/gensystemtap.pl: Scripts to generate STP files * src/internal.h: Add probe macros * src/probes.d: Master list of probes * src/rpc/virnetclient.c, src/rpc/virnetserverclient.c, src/rpc/virnetsocket.c, src/rpc/virnettlscontext.c, src/util/event_poll.c: Insert probe points, removing any DEBUG statements that duplicate the info
2011-09-30 13:40:23 +00:00
endif
libvirtd_LDADD += \
../src/libvirt-lxc.la \
../src/libvirt-qemu.la
if ! WITH_DRIVER_MODULES
if WITH_QEMU
libvirtd_LDADD += ../src/libvirt_driver_qemu.la
if WITH_DTRACE_PROBES
libvirtd_LDADD += ../src/libvirt_qemu_probes.lo
endif
endif
if WITH_LXC
libvirtd_LDADD += ../src/libvirt_driver_lxc.la
endif
if WITH_XEN
libvirtd_LDADD += ../src/libvirt_driver_xen.la
endif
if WITH_LIBXL
libvirtd_LDADD += ../src/libvirt_driver_libxl.la
endif
if WITH_UML
libvirtd_LDADD += ../src/libvirt_driver_uml.la
endif
2008-11-19 16:58:23 +00:00
if WITH_STORAGE
libvirtd_LDADD += ../src/libvirt_driver_storage.la
endif
if WITH_NETWORK
libvirtd_LDADD += ../src/libvirt_driver_network.la
endif
if WITH_INTERFACE
libvirtd_LDADD += ../src/libvirt_driver_interface.la
endif
if WITH_NODE_DEVICES
libvirtd_LDADD += ../src/libvirt_driver_nodedev.la
endif
if WITH_SECRETS
libvirtd_LDADD += ../src/libvirt_driver_secret.la
endif
if WITH_NWFILTER
libvirtd_LDADD += ../src/libvirt_driver_nwfilter.la
endif
2008-11-21 12:16:08 +00:00
endif
libvirtd_LDADD += ../src/libvirt.la
2007-02-14 01:40:09 +00:00
2013-01-08 22:19:00 +00:00
if WITH_POLKIT
if WITH_POLKIT0
2007-12-05 18:21:27 +00:00
policydir = $(datadir)/PolicyKit/policy
policyauth = auth_admin_keep_session
else
policydir = $(datadir)/polkit-1/actions
policyauth = auth_admin_keep
endif
2007-12-05 18:21:27 +00:00
endif
libvirtd.policy: libvirtd.policy.in $(top_builddir)/config.status
$(AM_V_GEN) sed \
-e 's|[@]authaction[@]|$(policyauth)|g' \
< $< > $@-t && \
mv $@-t $@
BUILT_SOURCES += libvirtd.policy
install-data-local: install-init-redhat install-init-systemd install-init-upstart \
install-data-sasl install-data-polkit \
install-logrotate install-sysctl
$(MKDIR_P) $(DESTDIR)$(localstatedir)/log/libvirt \
$(DESTDIR)$(localstatedir)/run/libvirt \
$(DESTDIR)$(localstatedir)/lib/libvirt
uninstall-local:: uninstall-init-redhat uninstall-init-systemd uninstall-init-upstart \
uninstall-data-sasl uninstall-data-polkit \
uninstall-logrotate uninstall-sysctl
rmdir $(DESTDIR)$(localstatedir)/log/libvirt || :
rmdir $(DESTDIR)$(localstatedir)/run/libvirt || :
2007-03-13 22:43:22 +00:00
rmdir $(DESTDIR)$(localstatedir)/lib/libvirt || :
2013-01-08 22:19:00 +00:00
if WITH_POLKIT
install-data-polkit::
$(MKDIR_P) $(DESTDIR)$(policydir)
$(INSTALL_DATA) libvirtd.policy $(DESTDIR)$(policydir)/org.libvirt.unix.policy
uninstall-data-polkit::
rm -f $(DESTDIR)$(policydir)/org.libvirt.unix.policy
rmdir $(DESTDIR)$(policydir) || :
else
install-data-polkit::
uninstall-data-polkit::
endif
remote.c: $(DAEMON_GENERATED)
remote.h: $(DAEMON_GENERATED)
LOGROTATE_CONFS = libvirtd.qemu.logrotate libvirtd.lxc.logrotate \
libvirtd.uml.logrotate libvirtd.logrotate
BUILT_SOURCES += $(LOGROTATE_CONFS)
libvirtd.logrotate: libvirtd.logrotate.in
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
libvirtd.qemu.logrotate: libvirtd.qemu.logrotate.in
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
libvirtd.lxc.logrotate: libvirtd.lxc.logrotate.in
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
libvirtd.uml.logrotate: libvirtd.uml.logrotate.in
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
2008-12-09 20:22:39 +00:00
install-logrotate: $(LOGROTATE_CONFS)
$(MKDIR_P) $(DESTDIR)$(localstatedir)/log/libvirt/qemu/ \
$(DESTDIR)$(localstatedir)/log/libvirt/lxc/ \
$(DESTDIR)$(localstatedir)/log/libvirt/uml/ \
$(DESTDIR)$(sysconfdir)/logrotate.d/
$(INSTALL_DATA) libvirtd.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd
$(INSTALL_DATA) libvirtd.qemu.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.qemu
$(INSTALL_DATA) libvirtd.lxc.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.lxc
$(INSTALL_DATA) libvirtd.uml.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.uml
2008-12-09 20:22:39 +00:00
uninstall-logrotate:
rm -f $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.qemu \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.lxc \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.uml
rmdir $(DESTDIR)$(localstatedir)/log/libvirt/qemu || :
rmdir $(DESTDIR)$(localstatedir)/log/libvirt/lxc || :
rmdir $(DESTDIR)$(localstatedir)/log/libvirt/uml || :
rmdir $(DESTDIR)$(sysconfdir)/logrotate.d || :
install-sysconfig:
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sysconfig
$(INSTALL_DATA) $(srcdir)/libvirtd.sysconf \
$(DESTDIR)$(sysconfdir)/sysconfig/libvirtd
uninstall-sysconfig:
rm -f $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd
rmdir $(DESTDIR)$(sysconfdir)/sysconfig || :
if WITH_SYSCTL
# Use $(prefix)/lib rather than $(libdir), since man sysctl.d insists on
# /usr/lib/sysctl.d/ even when libdir is /usr/lib64
install-sysctl:
$(MKDIR_P) $(DESTDIR)$(prefix)/lib/sysctl.d
$(INSTALL_DATA) $(srcdir)/libvirtd.sysctl \
$(DESTDIR)$(prefix)/lib/sysctl.d/libvirtd.conf
uninstall-sysctl:
rm -f $(DESTDIR)$(prefix)/lib/sysctl.d/libvirtd.conf
rmdir $(DESTDIR)$(prefix)/lib/sysctl.d || :
else
install-sysctl:
uninstall-sysctl:
endif
if LIBVIRT_INIT_SCRIPT_RED_HAT
2007-06-26 23:03:48 +00:00
BUILT_SOURCES += libvirtd.init
install-init-redhat: install-sysconfig libvirtd.init
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/rc.d/init.d
$(INSTALL_SCRIPT) libvirtd.init \
$(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd
uninstall-init-redhat: uninstall-sysconfig
rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd
rmdir $(DESTDIR)$(sysconfdir)/rc.d/init.d || :
else
install-init-redhat:
uninstall-init-redhat:
endif # LIBVIRT_INIT_SCRIPT_RED_HAT
if LIBVIRT_INIT_SCRIPT_UPSTART
install-init-upstart: install-sysconfig
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/event.d
$(INSTALL_SCRIPT) libvirtd.upstart \
$(DESTDIR)$(sysconfdir)/event.d/libvirtd
uninstall-init-upstart: uninstall-sysconfig
rm -f $(DESTDIR)$(sysconfdir)/event.d/libvirtd
rmdir $(DESTDIR)$(sysconfdir)/event.d || :
else
install-init-upstart:
uninstall-init-upstart:
endif # LIBVIRT_INIT_SCRIPT_UPSTART
if LIBVIRT_INIT_SCRIPT_SYSTEMD
SYSTEMD_UNIT_DIR = /lib/systemd/system
BUILT_SOURCES += libvirtd.service
install-init-systemd: install-sysconfig libvirtd.service
$(MKDIR_P) $(DESTDIR)$(SYSTEMD_UNIT_DIR)
$(INSTALL_DATA) libvirtd.service \
$(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirtd.service
uninstall-init-systemd: uninstall-sysconfig
rm -f $(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirtd.service
rmdir $(DESTDIR)$(SYSTEMD_UNIT_DIR) || :
else
install-init-systemd:
uninstall-init-systemd:
endif # LIBVIRT_INIT_SCRIPT_SYSTEMD
libvirtd.init: libvirtd.init.in $(top_builddir)/config.status
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
-e 's|[@]sbindir[@]|$(sbindir)|g' \
-e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
< $< > $@-t && \
chmod a+x $@-t && \
mv $@-t $@
2007-06-26 23:03:48 +00:00
libvirtd.service: libvirtd.service.in $(top_builddir)/config.status
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
-e 's|[@]sbindir[@]|$(sbindir)|g' \
-e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
< $< > $@-t && \
mv $@-t $@
check-local: check-augeas
AUG_GENTEST = $(PERL) $(top_srcdir)/build-aux/augeas-gentest.pl
test_libvirtd.aug: test_libvirtd.aug.in $(srcdir)/libvirtd.conf
$(AM_V_GEN)$(AUG_GENTEST) $(srcdir)/libvirtd.conf $< $@
check-augeas: test_libvirtd.aug
$(AM_V_GEN)if test -x '$(AUGPARSE)'; then \
'$(AUGPARSE)' -I $(srcdir) test_libvirtd.aug; \
fi
# This must be added last, since functions it provides/replaces
# are used by nearly every other library.
2009-01-08 20:42:01 +00:00
libvirtd_LDADD += ../gnulib/lib/libgnu.la $(LIBSOCKET)
else # WITH_LIBVIRTD
install-data-local: install-data-sasl
uninstall-local:: uninstall-data-sasl
endif # WITH_LIBVIRTD
POD2MAN = pod2man -c "Virtualization Support" \
-r "$(PACKAGE)-$(VERSION)" -s 8
$(srcdir)/libvirtd.8.in: libvirtd.pod.in $(top_srcdir)/configure.ac
$(AM_V_GEN)$(POD2MAN) --name LIBVIRTD $< $@ \
&& if grep 'POD ERROR' $@ ; then rm $@; exit 1; fi
# This is needed for clients too, so can't wrap in
# the WITH_LIBVIRTD conditional
if WITH_SASL
install-data-sasl:
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sasl2/
$(INSTALL_DATA) $(srcdir)/libvirtd.sasl $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
uninstall-data-sasl:
rm -f $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
rmdir $(DESTDIR)$(sysconfdir)/sasl2/ || :
else
install-data-sasl:
uninstall-data-sasl:
endif
CLEANFILES += $(BUILT_SOURCES) $(man8_MANS)
CLEANFILES += *.cov *.gcov .libs/*.gcda .libs/*.gcno *.gcno *.gcda
MAINTAINERCLEANFILES = $(srcdir)/libvirtd.8.in $(DAEMON_GENERATED)