libvirt/tests/vmx2xmldata/vmx2xml-cdrom-ide-device.xml

<domain type='vmware'>
  <name>test</name>
  <uuid>00000000-0000-0000-0000-000000000000</uuid>
  <memory unit='KiB'>32768</memory>
  <currentMemory unit='KiB'>32768</currentMemory>
  <vcpu placement='static'>1</vcpu>
  <os>
    <type arch='i686'>hvm</type>
  </os>
  <clock offset='utc'/>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <devices>
    <disk type='block' device='cdrom'>
      <source dev='/dev/scd0'/>
      <target dev='hda' bus='ide'/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>
    <controller type='ide' index='0'/>
    <video>
      <model type='vmvga' vram='4096' primary='yes'/>
    </video>
  </devices>
</domain>
ESX add tests for the VMX to/from domain XML mapping * tests/.gitignore: ignore new test binaries * tests/Makefile.am: add new tests * tests/esxutilstest.c: test esxVMX_IndexToDiskName() * tests/vmx2xmldata/: config files for the VMX to domain XML test tests/vmx2xmltest.c: test the VMX to domain XML mapping * tests/xml2vmxdata/: config files for the domain XML to VMX test tests/xml2vmxtest.c: test the domain XML to VMX mapping 2009-09-23 12:25:52 +00:00			`<domain type='vmware'>`
tests: vmx: Add <name> element for all domain XMLs <name> is mandatory for a domain XML. Add 'displayName' for all the test cases which were missing them so that <name> is parsed correctly. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pino Toscano <ptoscano@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> 2020-10-07 17:00:04 +00:00			`<name>test</name>`
ESX add tests for the VMX to/from domain XML mapping * tests/.gitignore: ignore new test binaries * tests/Makefile.am: add new tests * tests/esxutilstest.c: test esxVMX_IndexToDiskName() * tests/vmx2xmldata/: config files for the VMX to domain XML test tests/vmx2xmltest.c: test the VMX to domain XML mapping * tests/xml2vmxdata/: config files for the domain XML to VMX test tests/xml2vmxtest.c: test the domain XML to VMX mapping 2009-09-23 12:25:52 +00:00			`<uuid>00000000-0000-0000-0000-000000000000</uuid>`
xml: output memory unit for clarity Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/data tests/out -name '.xml' \| \ xargs sed -i 's/<\(memory\\|currentMemory\\|hard_limit\\|soft_limit\\|min_guarantee\\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/data tests/out -name '.xml' \| \ xargs sed -i 's/<\(capacity\\|allocation\\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/data/.xml: Update all tests. * tests/out/.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise. 2012-02-23 00:48:38 +00:00			`<memory unit='KiB'>32768</memory>`
			`<currentMemory unit='KiB'>32768</currentMemory>`
numad: Always output 'placement' of <vcpu> <vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs). 2012-05-08 16:04:36 +00:00			`<vcpu placement='static'>1</vcpu>`
ESX add tests for the VMX to/from domain XML mapping * tests/.gitignore: ignore new test binaries * tests/Makefile.am: add new tests * tests/esxutilstest.c: test esxVMX_IndexToDiskName() * tests/vmx2xmldata/: config files for the VMX to domain XML test tests/vmx2xmltest.c: test the VMX to domain XML mapping * tests/xml2vmxdata/: config files for the domain XML to VMX test tests/xml2vmxtest.c: test the domain XML to VMX mapping 2009-09-23 12:25:52 +00:00			`<os>`
			`<type arch='i686'>hvm</type>`
			`</os>`
			`<clock offset='utc'/>`
			`<on_poweroff>destroy</on_poweroff>`
			`<on_reboot>restart</on_reboot>`
			`<on_crash>destroy</on_crash>`
			`<devices>`
			`<disk type='block' device='cdrom'>`
			`<source dev='/dev/scd0'/>`
			`<target dev='hda' bus='ide'/>`
conf: Introduce new attribute for device address format * src/conf/domain_conf.h: Add new member "target" to struct _virDomainDeviceDriveAddress. * src/conf/domain_conf.c: Parse and format "target" * Lots of tests (.xml) in tests/domainsnapshotxml2xmlout, tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and tests/vmx2xmldata/ are modified for newly introduced attribute "target" for address of "drive" type. 2012-02-27 10:19:54 +00:00			`<address type='drive' controller='0' bus='0' target='0' unit='0'/>`
ESX add tests for the VMX to/from domain XML mapping * tests/.gitignore: ignore new test binaries * tests/Makefile.am: add new tests * tests/esxutilstest.c: test esxVMX_IndexToDiskName() * tests/vmx2xmldata/: config files for the VMX to domain XML test tests/vmx2xmltest.c: test the VMX to domain XML mapping * tests/xml2vmxdata/: config files for the domain XML to VMX test tests/xml2vmxtest.c: test the domain XML to VMX mapping 2009-09-23 12:25:52 +00:00			`</disk>`
esx: Add support for the controller element Also don't abuse the disk driver name to specify the SCSI controller model anymore: <driver name='buslogic'/> Use the newly added model attribute of the controller element for this: <controller type='scsi' index='0' model='buslogic'/> The disk driver name approach is deprecated now, but still works for backward compatibility reasons. Update the documentation and tests accordingly. Fix usage of the words controller and id in the VMX handling code. Use controller, bus and unit properly. 2010-06-17 17:57:12 +00:00			`<controller type='ide' index='0'/>`
vmx: Add support for video device VRAM size Update test suite accordingly. 2010-12-30 17:08:54 +00:00			`<video>`
conf: also mark the implicit video as primary Commit 119cd06 started setting the primary bool for the first user-specified video even if user omitted the 'primary' attribute. However this was done before the addition of the implicit device. This broke startup of transient qemu domains with no <video>: https://bugzilla.redhat.com/show_bug.cgi?id=1325757 Move this default to virDomainDefPostParseInternal, after the addition of the implicit video device, to catch the implicit video as well. 2016-04-11 12:26:06 +00:00			`<model type='vmvga' vram='4096' primary='yes'/>`
vmx: Add support for video device VRAM size Update test suite accordingly. 2010-12-30 17:08:54 +00:00			`</video>`
ESX add tests for the VMX to/from domain XML mapping * tests/.gitignore: ignore new test binaries * tests/Makefile.am: add new tests * tests/esxutilstest.c: test esxVMX_IndexToDiskName() * tests/vmx2xmldata/: config files for the VMX to domain XML test tests/vmx2xmltest.c: test the VMX to domain XML mapping * tests/xml2vmxdata/: config files for the domain XML to VMX test tests/xml2vmxtest.c: test the domain XML to VMX mapping 2009-09-23 12:25:52 +00:00			`</devices>`
			`</domain>`