libvirt/docs/formatsnapshot.html.in

316 lines
15 KiB
HTML
Raw Normal View History

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<body>
<h1>Snapshot XML format</h1>
<ul id="toc"></ul>
<h2><a name="SnapshotAttributes">Snapshot XML</a></h2>
<p>
There are several types of snapshots:
</p>
<dl>
<dt>disk snapshot</dt>
<dd>Contents of disks (whether a subset or all disks associated
with the domain) are saved at a given point of time, and can
be restored back to that state. On a running guest, a disk
snapshot is likely to be only crash-consistent rather than
clean (that is, it represents the state of the disk on a
sudden power outage, and may need fsck or journal replays to
be made consistent); on an inactive guest, a disk snapshot is
clean if the disks were clean when the guest was last shut
down. Disk snapshots exist in two forms: internal (file
formats such as qcow2 track both the snapshot and changes
since the snapshot in a single file) and external (the
snapshot is one file, and the changes since the snapshot are
in another file).</dd>
snapshot: new XML for external system checkpoint Each <domainsnapshot> can now contain an optional <memory> element that describes how the VM state was handled, similar to disk snapshots. The new element will always appear in output; for back-compat, an input that lacks the element will assume 'no' or 'internal' according to the domain state. Along with this change, it is now possible to pass <disks> in the XML for an offline snapshot; this also needs to be wired up in a future patch, to make it possible to choose internal vs. external on a per-disk basis for each disk in an offline domain. At that point, using the --disk-only flag for an offline domain will be able to work. For some examples below, remember that qemu supports the following snapshot actions: qemu-img: offline external and internal disk savevm: online internal VM and disk migrate: online external VM transaction: online external disk ===== <domainsnapshot> <memory snapshot='no'/> ... </domainsnapshot> implies that there is no VM state saved (mandatory for offline and disk-only snapshots, not possible otherwise); using qemu-img for offline domains and transaction for online. ===== <domainsnapshot> <memory snapshot='internal'/> ... </domainsnapshot> state is saved inside one of the disks (as in qemu's 'savevm' system checkpoint implementation). If needed in the future, we can also add an attribute pointing out _which_ disk saved the internal state; maybe disk='vda'. ===== <domainsnapshot> <memory snapshot='external' file='/path/to/state'/> ... </domainsnapshot> This is not wired up yet, but future patches will allow this to control a combination of 'virsh save /path/to/state' plus disk snapshots from the same point in time. ===== So for 1.0.1 (and later, as needed), I plan to implement this table of combinations, with '*' designating new code and '+' designating existing code reached through new combinations of xml and/or the existing DISK_ONLY flag: domain memory disk disk-only | result ----------------------------------------- offline omit omit any | memory=no disk=int, via qemu-img offline no omit any |+memory=no disk=int, via qemu-img offline omit/no no any | invalid combination (nothing to snapshot) offline omit/no int any |+memory=no disk=int, via qemu-img offline omit/no ext any |*memory=no disk=ext, via qemu-img offline int/ext any any | invalid combination (no memory to save) online omit omit off | memory=int disk=int, via savevm online omit omit on | memory=no disk=default, via transaction online omit no/ext off | unsupported for now online omit no on | invalid combination (nothing to snapshot) online omit ext on | memory=no disk=ext, via transaction online omit int off |+memory=int disk=int, via savevm online omit int on | unsupported for now online no omit any |+memory=no disk=default, via transaction online no no any | invalid combination (nothing to snapshot) online no int any | unsupported for now online no ext any |+memory=no disk=ext, via transaction online int/ext any on | invalid combination (disk-only vs. memory) online int omit off |+memory=int disk=int, via savevm online int no/ext off | unsupported for now online int int off |+memory=int disk=int, via savevm online ext omit off |*memory=ext disk=default, via migrate+trans online ext no off |+memory=ext disk=no, via migrate online ext int off | unsupported for now online ext ext off |*memory=ext disk=ext, via migrate+transaction * docs/schemas/domainsnapshot.rng (memory): New RNG element. * docs/formatsnapshot.html.in: Document it. * src/conf/snapshot_conf.h (virDomainSnapshotDef): New fields. * src/conf/domain_conf.c (virDomainSnapshotDefFree) (virDomainSnapshotDefParseString, virDomainSnapshotDefFormat): Manage new fields. * tests/domainsnapshotxml2xmltest.c: New test. * tests/domainsnapshotxml2xmlin/*.xml: Update existing tests. * tests/domainsnapshotxml2xmlout/*.xml: Likewise.
2012-10-23 15:12:23 +00:00
<dt>memory state (or VM state)</dt>
<dd>Tracks only the state of RAM and all other resources in use
by the VM. If the disks are unmodified between the time a VM
state snapshot is taken and restored, then the guest will
resume in a consistent state; but if the disks are modified
externally in the meantime, this is likely to lead to data
corruption.</dd>
<dt>system checkpoint</dt>
<dd>A combination of disk snapshots for all disks as well as VM
snapshot: new XML for external system checkpoint Each <domainsnapshot> can now contain an optional <memory> element that describes how the VM state was handled, similar to disk snapshots. The new element will always appear in output; for back-compat, an input that lacks the element will assume 'no' or 'internal' according to the domain state. Along with this change, it is now possible to pass <disks> in the XML for an offline snapshot; this also needs to be wired up in a future patch, to make it possible to choose internal vs. external on a per-disk basis for each disk in an offline domain. At that point, using the --disk-only flag for an offline domain will be able to work. For some examples below, remember that qemu supports the following snapshot actions: qemu-img: offline external and internal disk savevm: online internal VM and disk migrate: online external VM transaction: online external disk ===== <domainsnapshot> <memory snapshot='no'/> ... </domainsnapshot> implies that there is no VM state saved (mandatory for offline and disk-only snapshots, not possible otherwise); using qemu-img for offline domains and transaction for online. ===== <domainsnapshot> <memory snapshot='internal'/> ... </domainsnapshot> state is saved inside one of the disks (as in qemu's 'savevm' system checkpoint implementation). If needed in the future, we can also add an attribute pointing out _which_ disk saved the internal state; maybe disk='vda'. ===== <domainsnapshot> <memory snapshot='external' file='/path/to/state'/> ... </domainsnapshot> This is not wired up yet, but future patches will allow this to control a combination of 'virsh save /path/to/state' plus disk snapshots from the same point in time. ===== So for 1.0.1 (and later, as needed), I plan to implement this table of combinations, with '*' designating new code and '+' designating existing code reached through new combinations of xml and/or the existing DISK_ONLY flag: domain memory disk disk-only | result ----------------------------------------- offline omit omit any | memory=no disk=int, via qemu-img offline no omit any |+memory=no disk=int, via qemu-img offline omit/no no any | invalid combination (nothing to snapshot) offline omit/no int any |+memory=no disk=int, via qemu-img offline omit/no ext any |*memory=no disk=ext, via qemu-img offline int/ext any any | invalid combination (no memory to save) online omit omit off | memory=int disk=int, via savevm online omit omit on | memory=no disk=default, via transaction online omit no/ext off | unsupported for now online omit no on | invalid combination (nothing to snapshot) online omit ext on | memory=no disk=ext, via transaction online omit int off |+memory=int disk=int, via savevm online omit int on | unsupported for now online no omit any |+memory=no disk=default, via transaction online no no any | invalid combination (nothing to snapshot) online no int any | unsupported for now online no ext any |+memory=no disk=ext, via transaction online int/ext any on | invalid combination (disk-only vs. memory) online int omit off |+memory=int disk=int, via savevm online int no/ext off | unsupported for now online int int off |+memory=int disk=int, via savevm online ext omit off |*memory=ext disk=default, via migrate+trans online ext no off |+memory=ext disk=no, via migrate online ext int off | unsupported for now online ext ext off |*memory=ext disk=ext, via migrate+transaction * docs/schemas/domainsnapshot.rng (memory): New RNG element. * docs/formatsnapshot.html.in: Document it. * src/conf/snapshot_conf.h (virDomainSnapshotDef): New fields. * src/conf/domain_conf.c (virDomainSnapshotDefFree) (virDomainSnapshotDefParseString, virDomainSnapshotDefFormat): Manage new fields. * tests/domainsnapshotxml2xmltest.c: New test. * tests/domainsnapshotxml2xmlin/*.xml: Update existing tests. * tests/domainsnapshotxml2xmlout/*.xml: Likewise.
2012-10-23 15:12:23 +00:00
memory state, which can be used to resume the guest from where it
left off with symptoms similar to hibernation (that is, TCP
connections in the guest may have timed out, but no files or
processes are lost).</dd>
</dl>
<p>
Libvirt can manage all three types of snapshots. For now, VM
snapshot: new XML for external system checkpoint Each <domainsnapshot> can now contain an optional <memory> element that describes how the VM state was handled, similar to disk snapshots. The new element will always appear in output; for back-compat, an input that lacks the element will assume 'no' or 'internal' according to the domain state. Along with this change, it is now possible to pass <disks> in the XML for an offline snapshot; this also needs to be wired up in a future patch, to make it possible to choose internal vs. external on a per-disk basis for each disk in an offline domain. At that point, using the --disk-only flag for an offline domain will be able to work. For some examples below, remember that qemu supports the following snapshot actions: qemu-img: offline external and internal disk savevm: online internal VM and disk migrate: online external VM transaction: online external disk ===== <domainsnapshot> <memory snapshot='no'/> ... </domainsnapshot> implies that there is no VM state saved (mandatory for offline and disk-only snapshots, not possible otherwise); using qemu-img for offline domains and transaction for online. ===== <domainsnapshot> <memory snapshot='internal'/> ... </domainsnapshot> state is saved inside one of the disks (as in qemu's 'savevm' system checkpoint implementation). If needed in the future, we can also add an attribute pointing out _which_ disk saved the internal state; maybe disk='vda'. ===== <domainsnapshot> <memory snapshot='external' file='/path/to/state'/> ... </domainsnapshot> This is not wired up yet, but future patches will allow this to control a combination of 'virsh save /path/to/state' plus disk snapshots from the same point in time. ===== So for 1.0.1 (and later, as needed), I plan to implement this table of combinations, with '*' designating new code and '+' designating existing code reached through new combinations of xml and/or the existing DISK_ONLY flag: domain memory disk disk-only | result ----------------------------------------- offline omit omit any | memory=no disk=int, via qemu-img offline no omit any |+memory=no disk=int, via qemu-img offline omit/no no any | invalid combination (nothing to snapshot) offline omit/no int any |+memory=no disk=int, via qemu-img offline omit/no ext any |*memory=no disk=ext, via qemu-img offline int/ext any any | invalid combination (no memory to save) online omit omit off | memory=int disk=int, via savevm online omit omit on | memory=no disk=default, via transaction online omit no/ext off | unsupported for now online omit no on | invalid combination (nothing to snapshot) online omit ext on | memory=no disk=ext, via transaction online omit int off |+memory=int disk=int, via savevm online omit int on | unsupported for now online no omit any |+memory=no disk=default, via transaction online no no any | invalid combination (nothing to snapshot) online no int any | unsupported for now online no ext any |+memory=no disk=ext, via transaction online int/ext any on | invalid combination (disk-only vs. memory) online int omit off |+memory=int disk=int, via savevm online int no/ext off | unsupported for now online int int off |+memory=int disk=int, via savevm online ext omit off |*memory=ext disk=default, via migrate+trans online ext no off |+memory=ext disk=no, via migrate online ext int off | unsupported for now online ext ext off |*memory=ext disk=ext, via migrate+transaction * docs/schemas/domainsnapshot.rng (memory): New RNG element. * docs/formatsnapshot.html.in: Document it. * src/conf/snapshot_conf.h (virDomainSnapshotDef): New fields. * src/conf/domain_conf.c (virDomainSnapshotDefFree) (virDomainSnapshotDefParseString, virDomainSnapshotDefFormat): Manage new fields. * tests/domainsnapshotxml2xmltest.c: New test. * tests/domainsnapshotxml2xmlin/*.xml: Update existing tests. * tests/domainsnapshotxml2xmlout/*.xml: Likewise.
2012-10-23 15:12:23 +00:00
state (memory) snapshots are created only by
the <code>virDomainSave()</code>, <code>virDomainSaveFlags</code>,
and <code>virDomainManagedSave()</code> functions, and restored
via the <code>virDomainRestore()</code>,
<code>virDomainRestoreFlags()</code>, <code>virDomainCreate()</code>,
and <code>virDomainCreateWithFlags()</code> functions (as well
as via domain autostart). With managed snapshots, libvirt
tracks all information internally; with save images, the user
tracks the snapshot file, but libvirt provides functions such
as <code>virDomainSaveImageGetXMLDesc()</code> to work with
those files.
</p>
<p>System checkpoints are created
by <code>virDomainSnapshotCreateXML()</code> with no flags, and
disk snapshots are created by the same function with
the <code>VIR_DOMAIN_SNAPSHOT_CREATE_DISK_ONLY</code> flag; in
both cases, they are restored by
the <code>virDomainRevertToSnapshot()</code> function. For
these types of snapshots, libvirt tracks each snapshot as a
separate <code>virDomainSnapshotPtr</code> object, and maintains
a tree relationship of which snapshots descended from an earlier
point in time.
</p>
<p>
Attributes of libvirt snapshots are stored as child elements of
the <code>domainsnapshot</code> element. At snapshot creation
time, normally only the <code>name</code>, <code>description</code>,
and <code>disks</code> elements are settable; the rest of the
fields are ignored on creation, and will be filled in by
snapshot: allow recreation of metadata The first two flags are essential for being able to replicate snapshot hierarchies across multiple hosts, which will come in handy for supervised migrations. It also allows a management app to take a snapshot of a transient domain, save the metadata, stop the domain, recreate a new transient domain by the same name, redefine the snapshot, then revert to it. This is not quite as convenient as leaving the metadata behind after a domain is no longer around, but doing that has a few problems: 1. the libvirt API can only delete snapshot metadata if there is a valid domain handle to use to get to that snapshot object - if stale data is left behind without a domain, there is no way to request that the data be cleaned up. 2. creating a new domain with the same name but different uuid than the older domain where a snapshot existed cannot use the older snapshot data; this risks confusing libvirt, and forbidding the stale data is similar to the recent patch to forbid stale managed save. The first two flags might be useful on hypervisors with no metadata, but only for modifying the notion of the current snapshot; however, I don't know how to do that for ESX or VBox. The third flag is a convenience option, to combine a creation with a delete metadata into one step. It is trivial for hypervisors with no metadata. The qemu changes will be involved enough to warrant a separate patch. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE) (VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT) (VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags. * src/libvirt.c (virDomainSnapshotCreateXML): Document them, and enforce mutual exclusion. * src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial implementation. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise. * docs/formatsnapshot.html.in: Document re-creation.
2011-08-31 01:02:46 +00:00
libvirt in for informational purposes
by <code>virDomainSnapshotGetXMLDesc()</code>. However, when
redefining a snapshot (<span class="since">since 0.9.5</span>),
with the <code>VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE</code> flag
of <code>virDomainSnapshotCreateXML()</code>, all of the XML
described here is relevant.
</p>
<p>
Snapshots are maintained in a hierarchy. A domain can have a
current snapshot, which is the most recent snapshot compared to
the current state of the domain (although a domain might have
snapshots without a current snapshot, if snapshots have been
deleted in the meantime). Creating or reverting to a snapshot
sets that snapshot as current, and the prior current snapshot is
the parent of the new snapshot. Branches in the hierarchy can
be formed by reverting to a snapshot with a child, then creating
another snapshot.
</p>
<p>
The top-level <code>domainsnapshot</code> element may contain
the following elements:
</p>
<dl>
<dt><code>name</code></dt>
<dd>The name for this snapshot. If the name is specified when
snapshot: allow recreation of metadata The first two flags are essential for being able to replicate snapshot hierarchies across multiple hosts, which will come in handy for supervised migrations. It also allows a management app to take a snapshot of a transient domain, save the metadata, stop the domain, recreate a new transient domain by the same name, redefine the snapshot, then revert to it. This is not quite as convenient as leaving the metadata behind after a domain is no longer around, but doing that has a few problems: 1. the libvirt API can only delete snapshot metadata if there is a valid domain handle to use to get to that snapshot object - if stale data is left behind without a domain, there is no way to request that the data be cleaned up. 2. creating a new domain with the same name but different uuid than the older domain where a snapshot existed cannot use the older snapshot data; this risks confusing libvirt, and forbidding the stale data is similar to the recent patch to forbid stale managed save. The first two flags might be useful on hypervisors with no metadata, but only for modifying the notion of the current snapshot; however, I don't know how to do that for ESX or VBox. The third flag is a convenience option, to combine a creation with a delete metadata into one step. It is trivial for hypervisors with no metadata. The qemu changes will be involved enough to warrant a separate patch. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE) (VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT) (VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags. * src/libvirt.c (virDomainSnapshotCreateXML): Document them, and enforce mutual exclusion. * src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial implementation. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise. * docs/formatsnapshot.html.in: Document re-creation.
2011-08-31 01:02:46 +00:00
initially creating the snapshot, then the snapshot will have
that particular name. If the name is omitted when initially
creating the snapshot, then libvirt will make up a name for
the snapshot, based on the time when it was created.
</dd>
<dt><code>description</code></dt>
<dd>A human-readable description of the snapshot. If the
description is omitted when initially creating the snapshot,
then this field will be empty.
</dd>
snapshot: new XML for external system checkpoint Each <domainsnapshot> can now contain an optional <memory> element that describes how the VM state was handled, similar to disk snapshots. The new element will always appear in output; for back-compat, an input that lacks the element will assume 'no' or 'internal' according to the domain state. Along with this change, it is now possible to pass <disks> in the XML for an offline snapshot; this also needs to be wired up in a future patch, to make it possible to choose internal vs. external on a per-disk basis for each disk in an offline domain. At that point, using the --disk-only flag for an offline domain will be able to work. For some examples below, remember that qemu supports the following snapshot actions: qemu-img: offline external and internal disk savevm: online internal VM and disk migrate: online external VM transaction: online external disk ===== <domainsnapshot> <memory snapshot='no'/> ... </domainsnapshot> implies that there is no VM state saved (mandatory for offline and disk-only snapshots, not possible otherwise); using qemu-img for offline domains and transaction for online. ===== <domainsnapshot> <memory snapshot='internal'/> ... </domainsnapshot> state is saved inside one of the disks (as in qemu's 'savevm' system checkpoint implementation). If needed in the future, we can also add an attribute pointing out _which_ disk saved the internal state; maybe disk='vda'. ===== <domainsnapshot> <memory snapshot='external' file='/path/to/state'/> ... </domainsnapshot> This is not wired up yet, but future patches will allow this to control a combination of 'virsh save /path/to/state' plus disk snapshots from the same point in time. ===== So for 1.0.1 (and later, as needed), I plan to implement this table of combinations, with '*' designating new code and '+' designating existing code reached through new combinations of xml and/or the existing DISK_ONLY flag: domain memory disk disk-only | result ----------------------------------------- offline omit omit any | memory=no disk=int, via qemu-img offline no omit any |+memory=no disk=int, via qemu-img offline omit/no no any | invalid combination (nothing to snapshot) offline omit/no int any |+memory=no disk=int, via qemu-img offline omit/no ext any |*memory=no disk=ext, via qemu-img offline int/ext any any | invalid combination (no memory to save) online omit omit off | memory=int disk=int, via savevm online omit omit on | memory=no disk=default, via transaction online omit no/ext off | unsupported for now online omit no on | invalid combination (nothing to snapshot) online omit ext on | memory=no disk=ext, via transaction online omit int off |+memory=int disk=int, via savevm online omit int on | unsupported for now online no omit any |+memory=no disk=default, via transaction online no no any | invalid combination (nothing to snapshot) online no int any | unsupported for now online no ext any |+memory=no disk=ext, via transaction online int/ext any on | invalid combination (disk-only vs. memory) online int omit off |+memory=int disk=int, via savevm online int no/ext off | unsupported for now online int int off |+memory=int disk=int, via savevm online ext omit off |*memory=ext disk=default, via migrate+trans online ext no off |+memory=ext disk=no, via migrate online ext int off | unsupported for now online ext ext off |*memory=ext disk=ext, via migrate+transaction * docs/schemas/domainsnapshot.rng (memory): New RNG element. * docs/formatsnapshot.html.in: Document it. * src/conf/snapshot_conf.h (virDomainSnapshotDef): New fields. * src/conf/domain_conf.c (virDomainSnapshotDefFree) (virDomainSnapshotDefParseString, virDomainSnapshotDefFormat): Manage new fields. * tests/domainsnapshotxml2xmltest.c: New test. * tests/domainsnapshotxml2xmlin/*.xml: Update existing tests. * tests/domainsnapshotxml2xmlout/*.xml: Likewise.
2012-10-23 15:12:23 +00:00
<dt><code>memory</code></dt>
<dd>On input, this is an optional request for how to handle VM
memory state. For an offline domain or a disk-only snapshot,
attribute <code>snapshot</code> must be <code>no</code>, since
there is no VM state saved; otherwise, the attribute can
be <code>internal</code> if the memory state is piggy-backed with
other internal disk state, or <code>external</code> along with
a second attribute <code>file</code> giving the absolute path
of the file holding the VM memory state. <span class="since">Since
1.0.1</span>
</dd>
<dt><code>disks</code></dt>
<dd>On input, this is an optional listing of specific
instructions for disk snapshots; it is needed when making a
snapshot of only a subset of the disks associated with a
domain, or when overriding the domain defaults for how to
snapshot each disk, or for providing specific control over
what file name is created in an external snapshot. On output,
this is fully populated to show the state of each disk in the
snapshot, including any properties that were generated by the
hypervisor defaults. For system checkpoints, this field is
ignored on input and omitted on output (a system checkpoint
implies that all disks participate in the snapshot process,
and since the current implementation only does internal system
checkpoints, there are no extra details to add); a future
release may allow the use of <code>disks</code> with a system
checkpoint. This element has a list of <code>disk</code>
sub-elements, describing anywhere from zero to all of the
disks associated with the domain. <span class="since">Since
0.9.5</span>
<dl>
<dt><code>disk</code></dt>
<dd>This sub-element describes the snapshot properties of a
specific disk. The attribute <code>name</code> is
snapshot: also support disks by path I got confused when 'virsh domblkinfo dom disk' required the path to a disk (which can be ambiguous, since a single file can back multiple disks), rather than the unambiguous target device name that I was using in disk snapshots. So, in true developer fashion, I went for the best of both worlds - all interfaces that operate on a disk (aka block) now accept either the target name or the unambiguous path to the backing file used by the disk. * src/conf/domain_conf.h (virDomainDiskIndexByName): Add parameter. (virDomainDiskPathByName): New prototype. * src/libvirt_private.syms (domain_conf.h): Export it. * src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow searching by path, and decide whether ambiguity is okay. (virDomainDiskPathByName): New function. (virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update callers. * src/qemu/qemu_driver.c (qemudDomainBlockPeek) (qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig) (qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise. * src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath): Likewise. * src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive) (libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig) (libxlDomainUpdateDeviceConfig): Likewise. * src/uml/uml_driver.c (umlDomainBlockPeek): Likewise. * src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise. * docs/formatsnapshot.html.in: Update documentation. * tools/virsh.pod (domblkstat, domblkinfo): Likewise. * docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on disk targets. * docs/schemas/domainsnapshot.rng (disksnapshot): Update to match. * tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.
2011-08-20 02:38:36 +00:00
mandatory, and must match either the <code>&lt;target
dev='name'/&gt;</code> or an unambiguous <code>&lt;source
file='name'/&gt;</code> of one of
the <a href="formatdomain.html#elementsDisks">disk
devices</a> specified for the domain at the time of the
snapshot. The attribute <code>snapshot</code> is
optional, and the possible values are the same as the
<code>snapshot</code> attribute for
<a href="formatdomain.html#elementsDisks">disk devices</a>
(<code>no</code>, <code>internal</code>,
or <code>external</code>). Some hypervisors like ESX
require that if specified, the snapshot mode must not
override any snapshot mode attached to the corresponding
domain disk, while others like qemu allow this field to
override the domain default. If the snapshot mode is
external (whether specified or inherited), then there is
an optional sub-element <code>source</code>, with an
attribute <code>file</code> giving the name, and an
optional sub-element <code>driver</code>, with an
attribute <code>type</code> giving the driver type (such
as qcow2), of the new file created by the external
snapshot of the new file. If <code>source</code> is not
given and the disk is backed by a local image file (not
a block device or remote storage), a file name is
generated that consists of the existing file name
with anything after the trailing dot replaced by the
snapshot name. Remember that with external
snapshots, the original file name becomes the read-only
snapshot, and the new file name contains the read-write
delta of all disk changes since the snapshot.
<span class="since">Since 1.2.2</span> the <code>disk</code> element
supports an optional attribute <code>type</code> if the
<code>snapshot</code> attribute is set to <code>external</code>.
This attribute specifies the snapshot target storage type and allows
to overwrite the default <code>file</code> type. The <code>type</code>
attribute along with the format of the <code>source</code>
sub-element is identical to the <code>source</code> element used in
domain disk definitions. See the
<a href="formatdomain.html#elementsDisks">disk devices</a> section
documentation for further information.
Libvirt currently supports the <code>type</code> element in the qemu
driver and supported values are <code>file</code>, <code>block</code>
and <code>network</code> with a protocol of <code>gluster</code>
<span class="since">(since 1.2.2)</span>.
</dd>
</dl>
</dd>
<dt><code>creationTime</code></dt>
<dd>The time this snapshot was created. The time is specified
snapshot: allow recreation of metadata The first two flags are essential for being able to replicate snapshot hierarchies across multiple hosts, which will come in handy for supervised migrations. It also allows a management app to take a snapshot of a transient domain, save the metadata, stop the domain, recreate a new transient domain by the same name, redefine the snapshot, then revert to it. This is not quite as convenient as leaving the metadata behind after a domain is no longer around, but doing that has a few problems: 1. the libvirt API can only delete snapshot metadata if there is a valid domain handle to use to get to that snapshot object - if stale data is left behind without a domain, there is no way to request that the data be cleaned up. 2. creating a new domain with the same name but different uuid than the older domain where a snapshot existed cannot use the older snapshot data; this risks confusing libvirt, and forbidding the stale data is similar to the recent patch to forbid stale managed save. The first two flags might be useful on hypervisors with no metadata, but only for modifying the notion of the current snapshot; however, I don't know how to do that for ESX or VBox. The third flag is a convenience option, to combine a creation with a delete metadata into one step. It is trivial for hypervisors with no metadata. The qemu changes will be involved enough to warrant a separate patch. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE) (VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT) (VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags. * src/libvirt.c (virDomainSnapshotCreateXML): Document them, and enforce mutual exclusion. * src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial implementation. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise. * docs/formatsnapshot.html.in: Document re-creation.
2011-08-31 01:02:46 +00:00
in seconds since the Epoch, UTC (i.e. Unix time). Readonly.
</dd>
<dt><code>state</code></dt>
snapshot: allow recreation of metadata The first two flags are essential for being able to replicate snapshot hierarchies across multiple hosts, which will come in handy for supervised migrations. It also allows a management app to take a snapshot of a transient domain, save the metadata, stop the domain, recreate a new transient domain by the same name, redefine the snapshot, then revert to it. This is not quite as convenient as leaving the metadata behind after a domain is no longer around, but doing that has a few problems: 1. the libvirt API can only delete snapshot metadata if there is a valid domain handle to use to get to that snapshot object - if stale data is left behind without a domain, there is no way to request that the data be cleaned up. 2. creating a new domain with the same name but different uuid than the older domain where a snapshot existed cannot use the older snapshot data; this risks confusing libvirt, and forbidding the stale data is similar to the recent patch to forbid stale managed save. The first two flags might be useful on hypervisors with no metadata, but only for modifying the notion of the current snapshot; however, I don't know how to do that for ESX or VBox. The third flag is a convenience option, to combine a creation with a delete metadata into one step. It is trivial for hypervisors with no metadata. The qemu changes will be involved enough to warrant a separate patch. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE) (VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT) (VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags. * src/libvirt.c (virDomainSnapshotCreateXML): Document them, and enforce mutual exclusion. * src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial implementation. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise. * docs/formatsnapshot.html.in: Document re-creation.
2011-08-31 01:02:46 +00:00
<dd>The state of the domain at the time this snapshot was taken.
If the snapshot was created as a system checkpoint, then this
is the state of the domain at that time; when the domain is
reverted to this snapshot, the domain's state will default to
whatever is in this field unless additional flags are passed
to <code>virDomainRevertToSnapshot()</code>. Additionally,
this field can be the value "disk-snapshot"
(<span class="since">since 0.9.5</span>) when it represents
snapshot: new XML for external system checkpoint Each <domainsnapshot> can now contain an optional <memory> element that describes how the VM state was handled, similar to disk snapshots. The new element will always appear in output; for back-compat, an input that lacks the element will assume 'no' or 'internal' according to the domain state. Along with this change, it is now possible to pass <disks> in the XML for an offline snapshot; this also needs to be wired up in a future patch, to make it possible to choose internal vs. external on a per-disk basis for each disk in an offline domain. At that point, using the --disk-only flag for an offline domain will be able to work. For some examples below, remember that qemu supports the following snapshot actions: qemu-img: offline external and internal disk savevm: online internal VM and disk migrate: online external VM transaction: online external disk ===== <domainsnapshot> <memory snapshot='no'/> ... </domainsnapshot> implies that there is no VM state saved (mandatory for offline and disk-only snapshots, not possible otherwise); using qemu-img for offline domains and transaction for online. ===== <domainsnapshot> <memory snapshot='internal'/> ... </domainsnapshot> state is saved inside one of the disks (as in qemu's 'savevm' system checkpoint implementation). If needed in the future, we can also add an attribute pointing out _which_ disk saved the internal state; maybe disk='vda'. ===== <domainsnapshot> <memory snapshot='external' file='/path/to/state'/> ... </domainsnapshot> This is not wired up yet, but future patches will allow this to control a combination of 'virsh save /path/to/state' plus disk snapshots from the same point in time. ===== So for 1.0.1 (and later, as needed), I plan to implement this table of combinations, with '*' designating new code and '+' designating existing code reached through new combinations of xml and/or the existing DISK_ONLY flag: domain memory disk disk-only | result ----------------------------------------- offline omit omit any | memory=no disk=int, via qemu-img offline no omit any |+memory=no disk=int, via qemu-img offline omit/no no any | invalid combination (nothing to snapshot) offline omit/no int any |+memory=no disk=int, via qemu-img offline omit/no ext any |*memory=no disk=ext, via qemu-img offline int/ext any any | invalid combination (no memory to save) online omit omit off | memory=int disk=int, via savevm online omit omit on | memory=no disk=default, via transaction online omit no/ext off | unsupported for now online omit no on | invalid combination (nothing to snapshot) online omit ext on | memory=no disk=ext, via transaction online omit int off |+memory=int disk=int, via savevm online omit int on | unsupported for now online no omit any |+memory=no disk=default, via transaction online no no any | invalid combination (nothing to snapshot) online no int any | unsupported for now online no ext any |+memory=no disk=ext, via transaction online int/ext any on | invalid combination (disk-only vs. memory) online int omit off |+memory=int disk=int, via savevm online int no/ext off | unsupported for now online int int off |+memory=int disk=int, via savevm online ext omit off |*memory=ext disk=default, via migrate+trans online ext no off |+memory=ext disk=no, via migrate online ext int off | unsupported for now online ext ext off |*memory=ext disk=ext, via migrate+transaction * docs/schemas/domainsnapshot.rng (memory): New RNG element. * docs/formatsnapshot.html.in: Document it. * src/conf/snapshot_conf.h (virDomainSnapshotDef): New fields. * src/conf/domain_conf.c (virDomainSnapshotDefFree) (virDomainSnapshotDefParseString, virDomainSnapshotDefFormat): Manage new fields. * tests/domainsnapshotxml2xmltest.c: New test. * tests/domainsnapshotxml2xmlin/*.xml: Update existing tests. * tests/domainsnapshotxml2xmlout/*.xml: Likewise.
2012-10-23 15:12:23 +00:00
only a disk snapshot (no VM memory state), and reverting to this
snapshot will default to an inactive guest. Readonly.
</dd>
<dt><code>parent</code></dt>
<dd>The parent of this snapshot. If present, this element
contains exactly one child element, name. This specifies the
name of the parent snapshot of this snapshot, and is used to
represent trees of snapshots. Readonly.
</dd>
<dt><code>domain</code></dt>
2011-08-13 01:19:47 +00:00
<dd>The domain that this snapshot was taken against. Older
versions of libvirt stored only a single child element, uuid;
reverting to a snapshot like this is risky if the current
state of the domain differs from the state that the domain was
created in, and requires the use of the
<code>VIR_DOMAIN_SNAPSHOT_REVERT_FORCE</code> flag
in <code>virDomainRevertToSnapshot()</code>. Newer versions
of libvirt (<span class="since">since 0.9.5</span>) store the entire
2011-08-13 01:19:47 +00:00
inactive <a href="formatdomain.html">domain configuration</a>
at the time of the snapshot (<span class="since">since
0.9.5</span>). Readonly.
</dd>
</dl>
2011-08-13 01:19:47 +00:00
<h2><a name="example">Examples</a></h2>
<p>Using this XML to create a disk snapshot of just vda on a qemu
domain with two disks:</p>
<pre>
snapshot: allow recreation of metadata The first two flags are essential for being able to replicate snapshot hierarchies across multiple hosts, which will come in handy for supervised migrations. It also allows a management app to take a snapshot of a transient domain, save the metadata, stop the domain, recreate a new transient domain by the same name, redefine the snapshot, then revert to it. This is not quite as convenient as leaving the metadata behind after a domain is no longer around, but doing that has a few problems: 1. the libvirt API can only delete snapshot metadata if there is a valid domain handle to use to get to that snapshot object - if stale data is left behind without a domain, there is no way to request that the data be cleaned up. 2. creating a new domain with the same name but different uuid than the older domain where a snapshot existed cannot use the older snapshot data; this risks confusing libvirt, and forbidding the stale data is similar to the recent patch to forbid stale managed save. The first two flags might be useful on hypervisors with no metadata, but only for modifying the notion of the current snapshot; however, I don't know how to do that for ESX or VBox. The third flag is a convenience option, to combine a creation with a delete metadata into one step. It is trivial for hypervisors with no metadata. The qemu changes will be involved enough to warrant a separate patch. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE) (VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT) (VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags. * src/libvirt.c (virDomainSnapshotCreateXML): Document them, and enforce mutual exclusion. * src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial implementation. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise. * docs/formatsnapshot.html.in: Document re-creation.
2011-08-31 01:02:46 +00:00
&lt;domainsnapshot&gt;
2011-08-13 01:19:47 +00:00
&lt;description&gt;Snapshot of OS install and updates&lt;/description&gt;
&lt;disks&gt;
snapshot: also support disks by path I got confused when 'virsh domblkinfo dom disk' required the path to a disk (which can be ambiguous, since a single file can back multiple disks), rather than the unambiguous target device name that I was using in disk snapshots. So, in true developer fashion, I went for the best of both worlds - all interfaces that operate on a disk (aka block) now accept either the target name or the unambiguous path to the backing file used by the disk. * src/conf/domain_conf.h (virDomainDiskIndexByName): Add parameter. (virDomainDiskPathByName): New prototype. * src/libvirt_private.syms (domain_conf.h): Export it. * src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow searching by path, and decide whether ambiguity is okay. (virDomainDiskPathByName): New function. (virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update callers. * src/qemu/qemu_driver.c (qemudDomainBlockPeek) (qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig) (qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise. * src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath): Likewise. * src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive) (libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig) (libxlDomainUpdateDeviceConfig): Likewise. * src/uml/uml_driver.c (umlDomainBlockPeek): Likewise. * src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise. * docs/formatsnapshot.html.in: Update documentation. * tools/virsh.pod (domblkstat, domblkinfo): Likewise. * docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on disk targets. * docs/schemas/domainsnapshot.rng (disksnapshot): Update to match. * tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.
2011-08-20 02:38:36 +00:00
&lt;disk name='/path/to/old'&gt;
&lt;source file='/path/to/new'/&gt;
&lt;/disk&gt;
&lt;disk name='vdb' snapshot='no'/&gt;
&lt;/disks&gt;
2011-08-13 01:19:47 +00:00
&lt;/domainsnapshot&gt;</pre>
<p>will result in XML similar to this from
<code>virDomainSnapshotGetXMLDesc()</code>:</p>
2011-08-13 01:19:47 +00:00
<pre>
&lt;domainsnapshot&gt;
&lt;name&gt;1270477159&lt;/name&gt;
snapshot: allow recreation of metadata The first two flags are essential for being able to replicate snapshot hierarchies across multiple hosts, which will come in handy for supervised migrations. It also allows a management app to take a snapshot of a transient domain, save the metadata, stop the domain, recreate a new transient domain by the same name, redefine the snapshot, then revert to it. This is not quite as convenient as leaving the metadata behind after a domain is no longer around, but doing that has a few problems: 1. the libvirt API can only delete snapshot metadata if there is a valid domain handle to use to get to that snapshot object - if stale data is left behind without a domain, there is no way to request that the data be cleaned up. 2. creating a new domain with the same name but different uuid than the older domain where a snapshot existed cannot use the older snapshot data; this risks confusing libvirt, and forbidding the stale data is similar to the recent patch to forbid stale managed save. The first two flags might be useful on hypervisors with no metadata, but only for modifying the notion of the current snapshot; however, I don't know how to do that for ESX or VBox. The third flag is a convenience option, to combine a creation with a delete metadata into one step. It is trivial for hypervisors with no metadata. The qemu changes will be involved enough to warrant a separate patch. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE) (VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT) (VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags. * src/libvirt.c (virDomainSnapshotCreateXML): Document them, and enforce mutual exclusion. * src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial implementation. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise. * docs/formatsnapshot.html.in: Document re-creation.
2011-08-31 01:02:46 +00:00
&lt;description&gt;Snapshot of OS install and updates&lt;/description&gt;
&lt;state&gt;running&lt;/state&gt;
&lt;creationTime&gt;1270477159&lt;/creationTime&gt;
&lt;parent&gt;
&lt;name&gt;bare-os-install&lt;/name&gt;
&lt;/parent&gt;
snapshot: new XML for external system checkpoint Each <domainsnapshot> can now contain an optional <memory> element that describes how the VM state was handled, similar to disk snapshots. The new element will always appear in output; for back-compat, an input that lacks the element will assume 'no' or 'internal' according to the domain state. Along with this change, it is now possible to pass <disks> in the XML for an offline snapshot; this also needs to be wired up in a future patch, to make it possible to choose internal vs. external on a per-disk basis for each disk in an offline domain. At that point, using the --disk-only flag for an offline domain will be able to work. For some examples below, remember that qemu supports the following snapshot actions: qemu-img: offline external and internal disk savevm: online internal VM and disk migrate: online external VM transaction: online external disk ===== <domainsnapshot> <memory snapshot='no'/> ... </domainsnapshot> implies that there is no VM state saved (mandatory for offline and disk-only snapshots, not possible otherwise); using qemu-img for offline domains and transaction for online. ===== <domainsnapshot> <memory snapshot='internal'/> ... </domainsnapshot> state is saved inside one of the disks (as in qemu's 'savevm' system checkpoint implementation). If needed in the future, we can also add an attribute pointing out _which_ disk saved the internal state; maybe disk='vda'. ===== <domainsnapshot> <memory snapshot='external' file='/path/to/state'/> ... </domainsnapshot> This is not wired up yet, but future patches will allow this to control a combination of 'virsh save /path/to/state' plus disk snapshots from the same point in time. ===== So for 1.0.1 (and later, as needed), I plan to implement this table of combinations, with '*' designating new code and '+' designating existing code reached through new combinations of xml and/or the existing DISK_ONLY flag: domain memory disk disk-only | result ----------------------------------------- offline omit omit any | memory=no disk=int, via qemu-img offline no omit any |+memory=no disk=int, via qemu-img offline omit/no no any | invalid combination (nothing to snapshot) offline omit/no int any |+memory=no disk=int, via qemu-img offline omit/no ext any |*memory=no disk=ext, via qemu-img offline int/ext any any | invalid combination (no memory to save) online omit omit off | memory=int disk=int, via savevm online omit omit on | memory=no disk=default, via transaction online omit no/ext off | unsupported for now online omit no on | invalid combination (nothing to snapshot) online omit ext on | memory=no disk=ext, via transaction online omit int off |+memory=int disk=int, via savevm online omit int on | unsupported for now online no omit any |+memory=no disk=default, via transaction online no no any | invalid combination (nothing to snapshot) online no int any | unsupported for now online no ext any |+memory=no disk=ext, via transaction online int/ext any on | invalid combination (disk-only vs. memory) online int omit off |+memory=int disk=int, via savevm online int no/ext off | unsupported for now online int int off |+memory=int disk=int, via savevm online ext omit off |*memory=ext disk=default, via migrate+trans online ext no off |+memory=ext disk=no, via migrate online ext int off | unsupported for now online ext ext off |*memory=ext disk=ext, via migrate+transaction * docs/schemas/domainsnapshot.rng (memory): New RNG element. * docs/formatsnapshot.html.in: Document it. * src/conf/snapshot_conf.h (virDomainSnapshotDef): New fields. * src/conf/domain_conf.c (virDomainSnapshotDefFree) (virDomainSnapshotDefParseString, virDomainSnapshotDefFormat): Manage new fields. * tests/domainsnapshotxml2xmltest.c: New test. * tests/domainsnapshotxml2xmlin/*.xml: Update existing tests. * tests/domainsnapshotxml2xmlout/*.xml: Likewise.
2012-10-23 15:12:23 +00:00
&lt;memory snapshot='no'/&gt;
&lt;disks&gt;
&lt;disk name='vda' snapshot='external'&gt;
&lt;driver type='qcow2'/&gt;
<b>&lt;source file='/path/to/new'/&gt;</b>
&lt;/disk&gt;
&lt;disk name='vdb' snapshot='no'/&gt;
&lt;/disks&gt;
snapshot: allow recreation of metadata The first two flags are essential for being able to replicate snapshot hierarchies across multiple hosts, which will come in handy for supervised migrations. It also allows a management app to take a snapshot of a transient domain, save the metadata, stop the domain, recreate a new transient domain by the same name, redefine the snapshot, then revert to it. This is not quite as convenient as leaving the metadata behind after a domain is no longer around, but doing that has a few problems: 1. the libvirt API can only delete snapshot metadata if there is a valid domain handle to use to get to that snapshot object - if stale data is left behind without a domain, there is no way to request that the data be cleaned up. 2. creating a new domain with the same name but different uuid than the older domain where a snapshot existed cannot use the older snapshot data; this risks confusing libvirt, and forbidding the stale data is similar to the recent patch to forbid stale managed save. The first two flags might be useful on hypervisors with no metadata, but only for modifying the notion of the current snapshot; however, I don't know how to do that for ESX or VBox. The third flag is a convenience option, to combine a creation with a delete metadata into one step. It is trivial for hypervisors with no metadata. The qemu changes will be involved enough to warrant a separate patch. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE) (VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT) (VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags. * src/libvirt.c (virDomainSnapshotCreateXML): Document them, and enforce mutual exclusion. * src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial implementation. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise. * docs/formatsnapshot.html.in: Document re-creation.
2011-08-31 01:02:46 +00:00
&lt;domain&gt;
2011-08-13 01:19:47 +00:00
&lt;name&gt;fedora&lt;/name&gt;
snapshot: allow recreation of metadata The first two flags are essential for being able to replicate snapshot hierarchies across multiple hosts, which will come in handy for supervised migrations. It also allows a management app to take a snapshot of a transient domain, save the metadata, stop the domain, recreate a new transient domain by the same name, redefine the snapshot, then revert to it. This is not quite as convenient as leaving the metadata behind after a domain is no longer around, but doing that has a few problems: 1. the libvirt API can only delete snapshot metadata if there is a valid domain handle to use to get to that snapshot object - if stale data is left behind without a domain, there is no way to request that the data be cleaned up. 2. creating a new domain with the same name but different uuid than the older domain where a snapshot existed cannot use the older snapshot data; this risks confusing libvirt, and forbidding the stale data is similar to the recent patch to forbid stale managed save. The first two flags might be useful on hypervisors with no metadata, but only for modifying the notion of the current snapshot; however, I don't know how to do that for ESX or VBox. The third flag is a convenience option, to combine a creation with a delete metadata into one step. It is trivial for hypervisors with no metadata. The qemu changes will be involved enough to warrant a separate patch. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE) (VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT) (VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags. * src/libvirt.c (virDomainSnapshotCreateXML): Document them, and enforce mutual exclusion. * src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial implementation. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise. * docs/formatsnapshot.html.in: Document re-creation.
2011-08-31 01:02:46 +00:00
&lt;uuid&gt;93a5c045-6457-2c09-e56c-927cdf34e178&lt;/uuid&gt;
2011-08-13 01:19:47 +00:00
&lt;memory&gt;1048576&lt;/memory&gt;
...
&lt;devices&gt;
&lt;disk type='file' device='disk'&gt;
&lt;driver name='qemu' type='raw'/&gt;
<b>&lt;source file='/path/to/old'/&gt;</b>
&lt;target dev='vda' bus='virtio'/&gt;
&lt;/disk&gt;
&lt;disk type='file' device='disk' snapshot='external'&gt;
&lt;driver name='qemu' type='raw'/&gt;
&lt;source file='/path/to/old2'/&gt;
&lt;target dev='vdb' bus='virtio'/&gt;
&lt;/disk&gt;
...
2011-08-13 01:19:47 +00:00
&lt;/devices&gt;
snapshot: allow recreation of metadata The first two flags are essential for being able to replicate snapshot hierarchies across multiple hosts, which will come in handy for supervised migrations. It also allows a management app to take a snapshot of a transient domain, save the metadata, stop the domain, recreate a new transient domain by the same name, redefine the snapshot, then revert to it. This is not quite as convenient as leaving the metadata behind after a domain is no longer around, but doing that has a few problems: 1. the libvirt API can only delete snapshot metadata if there is a valid domain handle to use to get to that snapshot object - if stale data is left behind without a domain, there is no way to request that the data be cleaned up. 2. creating a new domain with the same name but different uuid than the older domain where a snapshot existed cannot use the older snapshot data; this risks confusing libvirt, and forbidding the stale data is similar to the recent patch to forbid stale managed save. The first two flags might be useful on hypervisors with no metadata, but only for modifying the notion of the current snapshot; however, I don't know how to do that for ESX or VBox. The third flag is a convenience option, to combine a creation with a delete metadata into one step. It is trivial for hypervisors with no metadata. The qemu changes will be involved enough to warrant a separate patch. * include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE) (VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT) (VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags. * src/libvirt.c (virDomainSnapshotCreateXML): Document them, and enforce mutual exclusion. * src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial implementation. * src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise. * docs/formatsnapshot.html.in: Document re-creation.
2011-08-31 01:02:46 +00:00
&lt;/domain&gt;
&lt;/domainsnapshot&gt;</pre>
<p>With that snapshot created, <code>/path/to/old</code> is the
read-only backing file to the new active
file <code>/path/to/new</code>. The <code>&lt;domain&gt;</code>
element within the snapshot xml records the state of the domain
just before the snapshot; a call
to <code>virDomainGetXMLDesc()</code> will show that the domain
has been changed to reflect the snapshot:
</p>
<pre>
&lt;domain&gt;
&lt;name&gt;fedora&lt;/name&gt;
&lt;uuid&gt;93a5c045-6457-2c09-e56c-927cdf34e178&lt;/uuid&gt;
&lt;memory&gt;1048576&lt;/memory&gt;
...
&lt;devices&gt;
&lt;disk type='file' device='disk'&gt;
&lt;driver name='qemu' type='qcow2'/&gt;
<b>&lt;source file='/path/to/new'/&gt;</b>
&lt;target dev='vda' bus='virtio'/&gt;
&lt;/disk&gt;
&lt;disk type='file' device='disk' snapshot='external'&gt;
&lt;driver name='qemu' type='raw'/&gt;
&lt;source file='/path/to/old2'/&gt;
&lt;target dev='vdb' bus='virtio'/&gt;
&lt;/disk&gt;
...
&lt;/devices&gt;
&lt;/domain&gt;</pre>
</body>
</html>