External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-11-05 04:41:20 +00:00
Code Issues Packages Projects Releases Wiki Activity
2ef57217f8
libvirt/tests/qemuxml2xmloutdata/interface-driver.xml

65 lines
2.3 KiB
XML
Raw Normal View History

tests: qemuxml2xml: Always use different output file Most qemuxml2xml tests expect that the input XML is unchanged after parsing. This is unlike 99% of new qemu configs in the wild, which after initial parsing end up with stable PCI device addresses. The xml2xml bit doesn't currently hit that code path though, so most XML testing indeed does not change. Future patches will add that PCI address bits, which means most test cases will have different output. So let's do away with the hardcoded same vs different test split, and always track a separate output file. Tests can still have same input and output, it just necessitates 2 separate XML files.
2016-01-13 15:43:27 +00:00
<domain type='qemu'>
<name>test</name>
<uuid>15d091de-0181-456b-9554-e4382dc1f1ab</uuid>
<memory unit='KiB'>1048576</memory>
<currentMemory unit='KiB'>1048576</currentMemory>
<vcpu placement='static'>1</vcpu>
<os>
tests: qemuxml2xml: Remove prehistoric machine types from legacy tests None of the tests depend on anything that the machine type would influence. This will allow us to drop the very old machine type from the non-real-data tests. If something depends on the machine type it should be tested with real data rather than this hack. Note that these tests are run only in the XML->XML suite because the XML->argv suite doesn't work with the network driver. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-01-23 09:39:47 +00:00
<type arch='x86_64' machine='pc'>hvm</type>
tests: qemuxml2xml: Always use different output file Most qemuxml2xml tests expect that the input XML is unchanged after parsing. This is unlike 99% of new qemu configs in the wild, which after initial parsing end up with stable PCI device addresses. The xml2xml bit doesn't currently hit that code path though, so most XML testing indeed does not change. Future patches will add that PCI address bits, which means most test cases will have different output. So let's do away with the hardcoded same vs different test split, and always track a separate output file. Tests can still have same input and output, it just necessitates 2 separate XML files.
2016-01-13 15:43:27 +00:00
<boot dev='cdrom'/>
<boot dev='hd'/>
<bootmenu enable='yes'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
<emulator>/usr/bin/qemu-system-x86_64</emulator>
tests: qemuxml2xml: Always use different output file Most qemuxml2xml tests expect that the input XML is unchanged after parsing. This is unlike 99% of new qemu configs in the wild, which after initial parsing end up with stable PCI device addresses. The xml2xml bit doesn't currently hit that code path though, so most XML testing indeed does not change. Future patches will add that PCI address bits, which means most test cases will have different output. So let's do away with the hardcoded same vs different test split, and always track a separate output file. Tests can still have same input and output, it just necessitates 2 separate XML files.
2016-01-13 15:43:27 +00:00
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' event_idx='on'/>
<source file='/var/lib/libvirt/images/f14.img'/>
<target dev='vda' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/Fedora-14-x86_64-Live-KDE.iso'/>
<target dev='hdc' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='1' target='0' unit='0'/>
</disk>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<controller type='usb' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
</controller>
tests: qemuxml2xml: Always use different output file Most qemuxml2xml tests expect that the input XML is unchanged after parsing. This is unlike 99% of new qemu configs in the wild, which after initial parsing end up with stable PCI device addresses. The xml2xml bit doesn't currently hit that code path though, so most XML testing indeed does not change. Future patches will add that PCI address bits, which means most test cases will have different output. So let's do away with the hardcoded same vs different test split, and always track a separate output file. Tests can still have same input and output, it just necessitates 2 separate XML files.
2016-01-13 15:43:27 +00:00
<controller type='virtio-serial' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</controller>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<controller type='ide' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
tests: qemuxml2xml: Always use different output file Most qemuxml2xml tests expect that the input XML is unchanged after parsing. This is unlike 99% of new qemu configs in the wild, which after initial parsing end up with stable PCI device addresses. The xml2xml bit doesn't currently hit that code path though, so most XML testing indeed does not change. Future patches will add that PCI address bits, which means most test cases will have different output. So let's do away with the hardcoded same vs different test split, and always track a separate output file. Tests can still have same input and output, it just necessitates 2 separate XML files.
2016-01-13 15:43:27 +00:00
<controller type='pci' index='0' model='pci-root'/>
<interface type='user'>
<mac address='52:54:00:e5:48:58'/>
<model type='virtio'/>
<driver ioeventfd='on' event_idx='on' queues='5'/>
<link state='up'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
tests: qemuxml2xml: Always use different output file Most qemuxml2xml tests expect that the input XML is unchanged after parsing. This is unlike 99% of new qemu configs in the wild, which after initial parsing end up with stable PCI device addresses. The xml2xml bit doesn't currently hit that code path though, so most XML testing indeed does not change. Future patches will add that PCI address bits, which means most test cases will have different output. So let's do away with the hardcoded same vs different test split, and always track a separate output file. Tests can still have same input and output, it just necessitates 2 separate XML files.
2016-01-13 15:43:27 +00:00
</interface>
<serial type='pty'>
qemu: Set targetModel based on targetType for serial devices Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2017-11-20 12:02:30 +00:00
<target type='isa-serial' port='0'>
<model name='isa-serial'/>
</target>
tests: qemuxml2xml: Always use different output file Most qemuxml2xml tests expect that the input XML is unchanged after parsing. This is unlike 99% of new qemu configs in the wild, which after initial parsing end up with stable PCI device addresses. The xml2xml bit doesn't currently hit that code path though, so most XML testing indeed does not change. Future patches will add that PCI address bits, which means most test cases will have different output. So let's do away with the hardcoded same vs different test split, and always track a separate output file. Tests can still have same input and output, it just necessitates 2 separate XML files.
2016-01-13 15:43:27 +00:00
</serial>
<console type='pty'>
<target type='serial' port='0'/>
</console>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
qemu: populate <audio> element with default config Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable - VNC - set to "none", unless passthrough of host env variable is set - SPICE - always set to "spice" - SDL - always passthrough host env - No graphics - set to "none", unless passthrough of host env variable is set The setting of the QEMU_AUDIO_DRV env variable is done in the code which configures graphics. If no <audio> element is present, we now auto-populate <audio> elements to reflect this historical default config. This avoids need to set audio env when processing graphics. Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-24 14:24:10 +00:00
<audio id='1' type='none'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<memballoon model='virtio'>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
</memballoon>
tests: qemuxml2xml: Always use different output file Most qemuxml2xml tests expect that the input XML is unchanged after parsing. This is unlike 99% of new qemu configs in the wild, which after initial parsing end up with stable PCI device addresses. The xml2xml bit doesn't currently hit that code path though, so most XML testing indeed does not change. Future patches will add that PCI address bits, which means most test cases will have different output. So let's do away with the hardcoded same vs different test split, and always track a separate output file. Tests can still have same input and output, it just necessitates 2 separate XML files.
2016-01-13 15:43:27 +00:00
</devices>
</domain>
Reference in New Issue Copy Permalink