External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-25 23:25:24 +00:00
Code Issues Packages Projects Releases Wiki Activity
300515b414
libvirt/tests/qemuxml2argvdata/pci-autofill-addr.args

31 lines
799 B
Plaintext
Raw Normal View History

qemu: auto-assign addresses when <address type='pci'/> is specified Rather than only assigning a PCI address when no address is given at all, also do it when the config says that the address type is 'pci', but it gives no address (virDeviceInfoPCIAddressWanted()). There are also several places after parsing but prior to address assignment where code previously expected that any info with address type='pci' would have a *valid* PCI address, which isn't always the case - now we check not only for type='pci', but also for a valid address (virDeviceInfoPCIAddressPresent()). The test case added in this patch was directly copied from Cole's patch titled: qemu: Wire up address type=pci auto_allocate
2016-05-17 18:08:13 +00:00
LC_ALL=C \
PATH=/bin \
HOME=/home/test \
USER=test \
LOGNAME=test \
QEMU_AUDIO_DRV=none \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
/usr/bin/qemu-system-x86_64 \
qemu: auto-assign addresses when <address type='pci'/> is specified Rather than only assigning a PCI address when no address is given at all, also do it when the config says that the address type is 'pci', but it gives no address (virDeviceInfoPCIAddressWanted()). There are also several places after parsing but prior to address assignment where code previously expected that any info with address type='pci' would have a *valid* PCI address, which isn't always the case - now we check not only for type='pci', but also for a valid address (virDeviceInfoPCIAddressPresent()). The test case added in this patch was directly copied from Cole's patch titled: qemu: Wire up address type=pci auto_allocate
2016-05-17 18:08:13 +00:00
-name fdr-br \
-S \
qemu: deprecate QEMU_CAPS_MACHINE_USB_OPT Implied by QEMU >= 1.3.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-machine pc-1.2,accel=tcg,usb=off,dump-guest-core=off \
qemu: auto-assign addresses when <address type='pci'/> is specified Rather than only assigning a PCI address when no address is given at all, also do it when the config says that the address type is 'pci', but it gives no address (virDeviceInfoPCIAddressWanted()). There are also several places after parsing but prior to address assignment where code previously expected that any info with address type='pci' would have a *valid* PCI address, which isn't always the case - now we check not only for type='pci', but also for a valid address (virDeviceInfoPCIAddressPresent()). The test case added in this patch was directly copied from Cole's patch titled: qemu: Wire up address type=pci auto_allocate
2016-05-17 18:08:13 +00:00
-m 2048 \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 11:29:16 +00:00
-smp 2,sockets=2,cores=1,threads=1 \
qemu: auto-assign addresses when <address type='pci'/> is specified Rather than only assigning a PCI address when no address is given at all, also do it when the config says that the address type is 'pci', but it gives no address (virDeviceInfoPCIAddressWanted()). There are also several places after parsing but prior to address assignment where code previously expected that any info with address type='pci' would have a *valid* PCI address, which isn't always the case - now we check not only for type='pci', but also for a valid address (virDeviceInfoPCIAddressPresent()). The test case added in this patch was directly copied from Cole's patch titled: qemu: Wire up address type=pci auto_allocate
2016-05-17 18:08:13 +00:00
-uuid 3ec6cbe1-b5a2-4515-b800-31a61855df41 \
qemu: deprecate QEMU_CAPS_DISPLAY Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-display none \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-user-config \
qemu: auto-assign addresses when <address type='pci'/> is specified Rather than only assigning a PCI address when no address is given at all, also do it when the config says that the address type is 'pci', but it gives no address (virDeviceInfoPCIAddressWanted()). There are also several places after parsing but prior to address assignment where code previously expected that any info with address type='pci' would have a *valid* PCI address, which isn't always the case - now we check not only for type='pci', but also for a valid address (virDeviceInfoPCIAddressPresent()). The test case added in this patch was directly copied from Cole's patch titled: qemu: Wire up address type=pci auto_allocate
2016-05-17 18:08:13 +00:00
-nodefaults \
qemu: command: always use -chardev for monitor config AFAIK there aren't any cases where we will/should hit the old code path for our supported qemu versions, so drop the old code. Massive test suite churn follows Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2017-06-26 14:40:39 +00:00
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-fdr-br/monitor.sock,\
server,nowait \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-28 22:04:58 +00:00
-mon chardev=charmonitor,id=monitor,mode=control \
qemu: deprecate QEMU_CAPS_RTC Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-rtc base=utc \
qemu: deprecate QEMU_CAPS_NO_SHUTDOWN Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-shutdown \
qemu: auto-assign addresses when <address type='pci'/> is specified Rather than only assigning a PCI address when no address is given at all, also do it when the config says that the address type is 'pci', but it gives no address (virDeviceInfoPCIAddressWanted()). There are also several places after parsing but prior to address assignment where code previously expected that any info with address type='pci' would have a *valid* PCI address, which isn't always the case - now we check not only for type='pci', but also for a valid address (virDeviceInfoPCIAddressPresent()). The test case added in this patch was directly copied from Cole's patch titled: qemu: Wire up address type=pci auto_allocate
2016-05-17 18:08:13 +00:00
-no-acpi \
-boot c \
-usb \
qemu: command: Move around order of generating -drive arguments Move together sections which are conditionaly executed depending on whether -device will be used together with the -drive.
2017-11-22 09:36:30 +00:00
-drive file=/var/iso/f18kde.iso,format=raw,if=none,id=drive-virtio-disk0,\
media=cdrom,readonly=on \
qemu: auto-assign addresses when <address type='pci'/> is specified Rather than only assigning a PCI address when no address is given at all, also do it when the config says that the address type is 'pci', but it gives no address (virDeviceInfoPCIAddressWanted()). There are also several places after parsing but prior to address assignment where code previously expected that any info with address type='pci' would have a *valid* PCI address, which isn't always the case - now we check not only for type='pci', but also for a valid address (virDeviceInfoPCIAddressPresent()). The test case added in this patch was directly copied from Cole's patch titled: qemu: Wire up address type=pci auto_allocate
2016-05-17 18:08:13 +00:00
-device virtio-blk-pci,bus=pci.0,addr=0x3,drive=drive-virtio-disk0,\
id=virtio-disk0 \
-vga cirrus \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4
Reference in New Issue Copy Permalink