libvirt/docs/formatstorage.html.in

801 lines
38 KiB
HTML
Raw Normal View History

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<body>
<h1>Storage pool and volume XML format</h1>
<ul id="toc"></ul>
<h2><a name="StoragePool">Storage pool XML</a></h2>
<p>
Although all storage pool backends share the same public APIs and
XML format, they have varying levels of capabilities. Some may
allow creation of volumes, others may only allow use of pre-existing
volumes. Some may have constraints on volume size, or placement.
</p>
<p>
The top level tag for a storage pool document is 'pool'. It has
a single attribute <code>type</code>, which is one of <code>dir</code>,
<code>fs</code>, <code>netfs</code>, <code>disk</code>,
<code>iscsi</code>, <code>logical</code>, <code>scsi</code>
(all <span class="since">since 0.4.1</span>), <code>mpath</code>
(<span class="since">since 0.7.1</span>), <code>rbd</code>
(<span class="since">since 0.9.13</span>), <code>sheepdog</code>
(<span class="since">since 0.10.0</span>),
<code>gluster</code> (<span class="since">since
1.2.0</span>), <code>zfs</code> (<span class="since">since
1.2.8</span>) or <code>vstorage</code> (<span class="since">since
3.1.0</span>). This corresponds to the
storage backend drivers listed further along in this document.
</p>
<h3><a name="StoragePoolFirst">General metadata</a></h3>
<pre>
&lt;pool type="iscsi"&gt;
&lt;name&gt;virtimages&lt;/name&gt;
&lt;uuid&gt;3e3fce45-4f53-4fa7-bb32-11f34168b82b&lt;/uuid&gt;
&lt;allocation&gt;10000000&lt;/allocation&gt;
&lt;capacity&gt;50000000&lt;/capacity&gt;
&lt;available&gt;40000000&lt;/available&gt;
...</pre>
<dl>
<dt><code>name</code></dt>
<dd>Providing a name for the pool which is unique to the host.
This is mandatory when defining a pool. <span class="since">Since 0.4.1</span></dd>
<dt><code>uuid</code></dt>
<dd>Providing an identifier for the pool which is globally unique.
This is optional when defining a pool, a UUID will be generated if
omitted. <span class="since">Since 0.4.1</span></dd>
<dt><code>allocation</code></dt>
<dd>Providing the total storage allocation for the pool. This may
be larger than the sum of the allocation of all volumes due to
metadata overhead. This value is in bytes. This is not applicable
when creating a pool. <span class="since">Since 0.4.1</span></dd>
<dt><code>capacity</code></dt>
<dd>Providing the total storage capacity for the pool. Due to
underlying device constraints it may not be possible to use the
full capacity for storage volumes. This value is in bytes. This
is not applicable when creating a pool. <span class="since">Since 0.4.1</span></dd>
<dt><code>available</code></dt>
<dd>Providing the free space available for allocating new volumes
in the pool. Due to underlying device constraints it may not be
possible to allocate the entire free space to a single volume.
This value is in bytes. This is not applicable when creating a
pool. <span class="since">Since 0.4.1</span></dd>
</dl>
<h3><a name="StoragePoolSource">Source elements</a></h3>
<p>
A single <code>source</code> element is contained within the top level
<code>pool</code> element. This tag is used to describe the source of
the storage pool. The set of child elements that it will contain
depend on the pool type, but come from the following child elements:
</p>
<pre>
...
&lt;source&gt;
&lt;host name="iscsi.example.com"/&gt;
&lt;device path="iqn.2013-06.com.example:iscsi-pool"/&gt;
&lt;auth type='chap' username='myname'&gt;
&lt;secret usage='mycluster_myname'/&gt;
&lt;/auth&gt;
&lt;vendor name="Acme"/&gt;
&lt;product name="model"/&gt;
&lt;/source&gt;
...</pre>
<pre>
...
&lt;source&gt;
&lt;device path='/dev/mapper/mpatha' part_separator='no'/&gt;
&lt;format type='gpt'/&gt;
&lt;/source&gt;
...</pre>
storage: Introduce parentaddr into virStoragePoolSourceAdapter Between reboots and kernel reloads, the SCSI host number used for SCSI storage pools may change requiring modification to the storage pool XML in order to use a specific SCSI host adapter. This patch introduces the "parentaddr" element and "unique_id" attribute for the SCSI host adapter in order to uniquely identify the adapter between reboots and kernel reloads. For now the goal is to only parse and format the XML. Both will be required to be provided in order to uniquely identify the desired SCSI host. The new XML is expected to be as follows: <adapter type='scsi_host'> <parentaddr unique_id='3'> <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/> </parentaddr> </adapter> where "parentaddr" is the parent device of the SCSI host using the PCI address on which the device resides and the value from the unique_id file for the device. Both the PCI address and unique_id values will be used to traverse the /sys/class/scsi_host/ directories looking at each link to match the PCI address reformatted to the directory link format where "domain:bus:slot:function" is found. Then for each matching directory the unique_id file for the scsi_host will be used to match the unique_id value in the xml. For a PCI address listed above, this will be formatted to "0000:00:1f.2" and the links in /sys/class/scsi_host will be used to find the host# to be used for the 'scsi_host' device. Each entry is a link to the /sys/bus/pci/devices directories, e.g.: % ls -al /sys/class/scsi_host/host2 lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2 % cat /sys/class/scsi_host/host2/unique_id 3 The "parentaddr" and "name" attributes are mutually exclusive to identify the SCSI host number. Use of the "parentaddr" element will be the preferred mechanism. This patch only supports to parse and format the XMLs. Later patches will add code to find out the scsi host number.
2014-03-04 03:15:13 +00:00
<pre>
...
&lt;source&gt;
&lt;adapter type='scsi_host' name='scsi_host1'/&gt;
&lt;/source&gt;
...</pre>
storage: Introduce parentaddr into virStoragePoolSourceAdapter Between reboots and kernel reloads, the SCSI host number used for SCSI storage pools may change requiring modification to the storage pool XML in order to use a specific SCSI host adapter. This patch introduces the "parentaddr" element and "unique_id" attribute for the SCSI host adapter in order to uniquely identify the adapter between reboots and kernel reloads. For now the goal is to only parse and format the XML. Both will be required to be provided in order to uniquely identify the desired SCSI host. The new XML is expected to be as follows: <adapter type='scsi_host'> <parentaddr unique_id='3'> <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/> </parentaddr> </adapter> where "parentaddr" is the parent device of the SCSI host using the PCI address on which the device resides and the value from the unique_id file for the device. Both the PCI address and unique_id values will be used to traverse the /sys/class/scsi_host/ directories looking at each link to match the PCI address reformatted to the directory link format where "domain:bus:slot:function" is found. Then for each matching directory the unique_id file for the scsi_host will be used to match the unique_id value in the xml. For a PCI address listed above, this will be formatted to "0000:00:1f.2" and the links in /sys/class/scsi_host will be used to find the host# to be used for the 'scsi_host' device. Each entry is a link to the /sys/bus/pci/devices directories, e.g.: % ls -al /sys/class/scsi_host/host2 lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2 % cat /sys/class/scsi_host/host2/unique_id 3 The "parentaddr" and "name" attributes are mutually exclusive to identify the SCSI host number. Use of the "parentaddr" element will be the preferred mechanism. This patch only supports to parse and format the XMLs. Later patches will add code to find out the scsi host number.
2014-03-04 03:15:13 +00:00
<pre>
...
&lt;source&gt;
&lt;adapter type='scsi_host'&gt;
&lt;parentaddr unique_id='1'&gt;
&lt;address domain='0x0000' bus='0x00' slot='0x1f' addr='0x2'/&gt;
&lt;/parentaddr&gt;
&lt;/adapter&gt;
&lt;/source&gt;
...</pre>
storage: Introduce parentaddr into virStoragePoolSourceAdapter Between reboots and kernel reloads, the SCSI host number used for SCSI storage pools may change requiring modification to the storage pool XML in order to use a specific SCSI host adapter. This patch introduces the "parentaddr" element and "unique_id" attribute for the SCSI host adapter in order to uniquely identify the adapter between reboots and kernel reloads. For now the goal is to only parse and format the XML. Both will be required to be provided in order to uniquely identify the desired SCSI host. The new XML is expected to be as follows: <adapter type='scsi_host'> <parentaddr unique_id='3'> <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/> </parentaddr> </adapter> where "parentaddr" is the parent device of the SCSI host using the PCI address on which the device resides and the value from the unique_id file for the device. Both the PCI address and unique_id values will be used to traverse the /sys/class/scsi_host/ directories looking at each link to match the PCI address reformatted to the directory link format where "domain:bus:slot:function" is found. Then for each matching directory the unique_id file for the scsi_host will be used to match the unique_id value in the xml. For a PCI address listed above, this will be formatted to "0000:00:1f.2" and the links in /sys/class/scsi_host will be used to find the host# to be used for the 'scsi_host' device. Each entry is a link to the /sys/bus/pci/devices directories, e.g.: % ls -al /sys/class/scsi_host/host2 lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2 % cat /sys/class/scsi_host/host2/unique_id 3 The "parentaddr" and "name" attributes are mutually exclusive to identify the SCSI host number. Use of the "parentaddr" element will be the preferred mechanism. This patch only supports to parse and format the XMLs. Later patches will add code to find out the scsi host number.
2014-03-04 03:15:13 +00:00
New XML attributes for storage pool source adapter This introduces 4 new attributes for storage pool source adapter. E.g. <adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/> Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults to 'scsi_host' if attribute 'name' is specified. I.e. It's optional for 'scsi_host' adapter, for back-compat reason. However, mandatory for 'fc_host' adapter and any new future adapter types. Attribute 'parent' is to specify the parent for the fc_host adapter. * docs/formatstorage.html.in: - Add documents for the 4 new attrs * docs/schemas/storagepool.rng: - Add RNG schema * src/conf/storage_conf.c: - Parse and format the new XMLs * src/conf/storage_conf.h: - New struct virStoragePoolSourceAdapter, replace "char *adapter" with it; - New enum virStoragePoolSourceAdapterType * src/libvirt_private.syms: - Export TypeToString and TypeFromString * src/phyp/phyp_driver.c: - Replace "adapter" with "adapter.data.name", which is member of the union of the new struct virStoragePoolSourceAdapter now. Later patch will add the checking, as "adapter.data.name" is only valid for "scsi_host" adapter. * src/storage/storage_backend_scsi.c: - Like above * tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml: * tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml: - New test for 'fc_host' and "scsi_host" adapter * tests/storagepoolxml2xmlout/pool-scsi.xml: - Change the expected output, as the 'type' defaults to 'scsi_host' if 'name" specified now * tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml: * tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml: - New test * tests/storagepoolxml2xmltest.c: - Include the test
2013-03-25 16:43:36 +00:00
<pre>
...
&lt;source&gt;
&lt;adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/&gt;
&lt;/source&gt;
...</pre>
New XML attributes for storage pool source adapter This introduces 4 new attributes for storage pool source adapter. E.g. <adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/> Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults to 'scsi_host' if attribute 'name' is specified. I.e. It's optional for 'scsi_host' adapter, for back-compat reason. However, mandatory for 'fc_host' adapter and any new future adapter types. Attribute 'parent' is to specify the parent for the fc_host adapter. * docs/formatstorage.html.in: - Add documents for the 4 new attrs * docs/schemas/storagepool.rng: - Add RNG schema * src/conf/storage_conf.c: - Parse and format the new XMLs * src/conf/storage_conf.h: - New struct virStoragePoolSourceAdapter, replace "char *adapter" with it; - New enum virStoragePoolSourceAdapterType * src/libvirt_private.syms: - Export TypeToString and TypeFromString * src/phyp/phyp_driver.c: - Replace "adapter" with "adapter.data.name", which is member of the union of the new struct virStoragePoolSourceAdapter now. Later patch will add the checking, as "adapter.data.name" is only valid for "scsi_host" adapter. * src/storage/storage_backend_scsi.c: - Like above * tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml: * tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml: - New test for 'fc_host' and "scsi_host" adapter * tests/storagepoolxml2xmlout/pool-scsi.xml: - Change the expected output, as the 'type' defaults to 'scsi_host' if 'name" specified now * tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml: * tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml: - New test * tests/storagepoolxml2xmltest.c: - Include the test
2013-03-25 16:43:36 +00:00
<dl>
<dt><code>device</code></dt>
<dd>Provides the source for pools backed by physical devices
(pool types <code>fs</code>, <code>logical</code>, <code>disk</code>,
<code>iscsi</code>, <code>zfs</code>, <code>vstorage</code>).
May be repeated multiple times depending on backend driver. Contains
a required attribute <code>path</code> which is either the fully
qualified path to the block device node or for <code>iscsi</code>
the iSCSI Qualified Name (IQN).
<span class="since">Since 0.4.1</span>
<p>An optional attribute <code>part_separator</code> for each
<code>path</code> may be supplied. Valid values for the attribute
may be either "yes" or "no". This attribute is to be used for a
<code>disk</code> pool type using a <code>path</code> to a
storage: Fix algorithm generating path names for devmapper https://bugzilla.redhat.com/show_bug.cgi?id=1265694 Commit id '020135dc' didn't quite get the algorithm correct when a device mapper source ended with a non numeric value (e.g. ends with an alphabet value). This patch modifies the 'part_separator' logic to add the "p" separator to the attempted target path name only when specified as part_separator='yes'. For a source name that already ends with a number, the logic doesn't change as the part separator would need to be there. For a source name that ends with something other than a number, this allows the possibility that a "p" separator can be added. The default for one of these source devices is to not add the separator. The key for device mapper and the need for a partition separator "p" is the presence of a number in the last character of the device name link in /dev/mapper. A name such as "/dev/mapper/mpatha1" would generate a "/dev/mapper/mpatha1p1" partition, while "/dev/mapper/mpatha" would generate partition "/dev/mapper/mpatha1". Similarly for a device mapper entry not using friendly names or an alias, a device such as "/dev/mapper/3600a0b80005b10ca00005ad656fd8d93" would generate a paritition "/dev/mapper/3600a0b80005b10ca00005ad656fd8d93p1", while a device such as "/dev/mapper/3600a0b80005b10ca00005e115729093f" would generate a partition "/dev/mapper/3600a0b80005b10ca00005e115729093f1". The long number is the WWID of the device. It's also possible to assign an alias for a device mapper entry, that alias follows the same rules with respect to ending with a number or not when adding a "p" to create the target device path.
2016-05-09 18:57:17 +00:00
device mapper multipath device. Setting the attribute to "yes"
causes libvirt to attempt to generate and find target volume path's
using a "p" separator. The default algorithm used by device mapper
is to add the "p" separator only when the source device path ends
with a number; however, it's possible to configure the devmapper
device to not use 'user_friendly_names' thus creating partitions
with the "p" separator even when the device source path does not
end with a number.
<span class="since">Since 1.3.1</span></p></dd>
<dt><code>dir</code></dt>
<dd>Provides the source for pools backed by directories (pool
types <code>dir</code>, <code>netfs</code>, <code>gluster</code>),
or optionally to select a subdirectory
within a pool that resembles a filesystem (pool
type <code>gluster</code>). May
only occur once. Contains a single attribute <code>path</code>
which is the fully qualified path to the backing directory or
for a <code>netfs</code> pool type using <code>format</code>
type "cifs", the path to the Samba share without the leading slash.
<span class="since">Since 0.4.1</span></dd>
2010-02-22 21:50:04 +00:00
<dt><code>adapter</code></dt>
<dd>Provides the source for pools backed by SCSI adapters (pool
storage: Introduce parentaddr into virStoragePoolSourceAdapter Between reboots and kernel reloads, the SCSI host number used for SCSI storage pools may change requiring modification to the storage pool XML in order to use a specific SCSI host adapter. This patch introduces the "parentaddr" element and "unique_id" attribute for the SCSI host adapter in order to uniquely identify the adapter between reboots and kernel reloads. For now the goal is to only parse and format the XML. Both will be required to be provided in order to uniquely identify the desired SCSI host. The new XML is expected to be as follows: <adapter type='scsi_host'> <parentaddr unique_id='3'> <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/> </parentaddr> </adapter> where "parentaddr" is the parent device of the SCSI host using the PCI address on which the device resides and the value from the unique_id file for the device. Both the PCI address and unique_id values will be used to traverse the /sys/class/scsi_host/ directories looking at each link to match the PCI address reformatted to the directory link format where "domain:bus:slot:function" is found. Then for each matching directory the unique_id file for the scsi_host will be used to match the unique_id value in the xml. For a PCI address listed above, this will be formatted to "0000:00:1f.2" and the links in /sys/class/scsi_host will be used to find the host# to be used for the 'scsi_host' device. Each entry is a link to the /sys/bus/pci/devices directories, e.g.: % ls -al /sys/class/scsi_host/host2 lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2 % cat /sys/class/scsi_host/host2/unique_id 3 The "parentaddr" and "name" attributes are mutually exclusive to identify the SCSI host number. Use of the "parentaddr" element will be the preferred mechanism. This patch only supports to parse and format the XMLs. Later patches will add code to find out the scsi host number.
2014-03-04 03:15:13 +00:00
type <code>scsi</code>). May only occur once.
<dl>
<dt><code>name</code></dt>
<dd>The SCSI adapter name (e.g. "scsi_host1", although a name
such as "host1" is still supported for backwards compatibility,
it is not recommended). The scsi_host name to be used can be
determined from the output of a <code>virsh nodedev-list
scsi_host</code> command followed by a combination of
<code>lspci</code> and <code>virsh nodedev-dumpxml
scsi_hostN</code> commands to find the <code>scsi_hostN</code>
to be used. <span class="since">Since 0.6.2</span>
<p>
It is further recommended to utilize the
<code>parentaddr</code> element since it's possible to have
the path to which the scsi_hostN uses change between system
reboots. <span class="since">Since 1.2.7</span>
</p>
</dd>
</dl>
<dl>
<dt><code>type</code></dt>
<dd>Specifies the adapter type. Valid values are "scsi_host" or
"fc_host". If omitted and the <code>name</code> attribute is
specified, then it defaults to "scsi_host". To keep backwards
compatibility, this attribute is optional <b>only</b> for the
"scsi_host" adapter, but is mandatory for the "fc_host" adapter.
<span class="since">Since 1.0.5</span>
A "fc_host" capable scsi_hostN can be determined by using
<code>virsh nodedev-list --cap fc_host</code>.
<span class="since">Since 1.2.8</span>
<p>
Note: Regardless of whether a "scsi_host" adapter type is defined
using a <code>name</code> or a <code>parentaddr</code>, it
should refer to a real scsi_host adapter as found through a
<code>virsh nodedev-list scsi_host</code> and <code>virsh
nodedev-dumpxml scsi_hostN</code> on one of the scsi_host's
displayed. It should not refer to a "fc_host" capable scsi_hostN
nor should it refer to the vHBA created for some "fc_host"
adapter. For a vHBA the <code>nodedev-dumpxml</code>
output parent setting will be the "fc_host" capable scsi_hostN
value. Additionally, do not refer to an iSCSI scsi_hostN for the
"scsi_host" source. An iSCSI scsi_hostN's
<code>nodedev-dumpxml</code> output parent field is generally
"computer". This is a libvirt created parent value indicating
no parent was defined for the node device.
</p>
storage: Introduce parentaddr into virStoragePoolSourceAdapter Between reboots and kernel reloads, the SCSI host number used for SCSI storage pools may change requiring modification to the storage pool XML in order to use a specific SCSI host adapter. This patch introduces the "parentaddr" element and "unique_id" attribute for the SCSI host adapter in order to uniquely identify the adapter between reboots and kernel reloads. For now the goal is to only parse and format the XML. Both will be required to be provided in order to uniquely identify the desired SCSI host. The new XML is expected to be as follows: <adapter type='scsi_host'> <parentaddr unique_id='3'> <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/> </parentaddr> </adapter> where "parentaddr" is the parent device of the SCSI host using the PCI address on which the device resides and the value from the unique_id file for the device. Both the PCI address and unique_id values will be used to traverse the /sys/class/scsi_host/ directories looking at each link to match the PCI address reformatted to the directory link format where "domain:bus:slot:function" is found. Then for each matching directory the unique_id file for the scsi_host will be used to match the unique_id value in the xml. For a PCI address listed above, this will be formatted to "0000:00:1f.2" and the links in /sys/class/scsi_host will be used to find the host# to be used for the 'scsi_host' device. Each entry is a link to the /sys/bus/pci/devices directories, e.g.: % ls -al /sys/class/scsi_host/host2 lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2 % cat /sys/class/scsi_host/host2/unique_id 3 The "parentaddr" and "name" attributes are mutually exclusive to identify the SCSI host number. Use of the "parentaddr" element will be the preferred mechanism. This patch only supports to parse and format the XMLs. Later patches will add code to find out the scsi host number.
2014-03-04 03:15:13 +00:00
</dd>
</dl>
<dl>
<dt><code>wwnn</code> and <code>wwpn</code></dt>
storage: Introduce parentaddr into virStoragePoolSourceAdapter Between reboots and kernel reloads, the SCSI host number used for SCSI storage pools may change requiring modification to the storage pool XML in order to use a specific SCSI host adapter. This patch introduces the "parentaddr" element and "unique_id" attribute for the SCSI host adapter in order to uniquely identify the adapter between reboots and kernel reloads. For now the goal is to only parse and format the XML. Both will be required to be provided in order to uniquely identify the desired SCSI host. The new XML is expected to be as follows: <adapter type='scsi_host'> <parentaddr unique_id='3'> <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/> </parentaddr> </adapter> where "parentaddr" is the parent device of the SCSI host using the PCI address on which the device resides and the value from the unique_id file for the device. Both the PCI address and unique_id values will be used to traverse the /sys/class/scsi_host/ directories looking at each link to match the PCI address reformatted to the directory link format where "domain:bus:slot:function" is found. Then for each matching directory the unique_id file for the scsi_host will be used to match the unique_id value in the xml. For a PCI address listed above, this will be formatted to "0000:00:1f.2" and the links in /sys/class/scsi_host will be used to find the host# to be used for the 'scsi_host' device. Each entry is a link to the /sys/bus/pci/devices directories, e.g.: % ls -al /sys/class/scsi_host/host2 lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2 % cat /sys/class/scsi_host/host2/unique_id 3 The "parentaddr" and "name" attributes are mutually exclusive to identify the SCSI host number. Use of the "parentaddr" element will be the preferred mechanism. This patch only supports to parse and format the XMLs. Later patches will add code to find out the scsi host number.
2014-03-04 03:15:13 +00:00
<dd>The "World Wide Node Name" (<code>wwnn</code>) and "World Wide
Port Name" (<code>wwpn</code>) are used by the "fc_host" adapter
to uniquely identify the device in the Fibre Channel storage fabric
(the device can be either a HBA or vHBA). Both wwnn and wwpn should
be specified. Use the command 'virsh nodedev-dumpxml' to determine
how to set the values for the wwnn/wwpn of a (v)HBA. The wwnn and
wwpn have very specific numerical format requirements based on the
hypervisor being used, thus care should be taken if you decide to
generate your own to follow the standards; otherwise, the pool
will fail to start with an opaque error message indicating failure
to write to the vport_create file during vport create/delete due
to "No such file or directory".
storage: Introduce parentaddr into virStoragePoolSourceAdapter Between reboots and kernel reloads, the SCSI host number used for SCSI storage pools may change requiring modification to the storage pool XML in order to use a specific SCSI host adapter. This patch introduces the "parentaddr" element and "unique_id" attribute for the SCSI host adapter in order to uniquely identify the adapter between reboots and kernel reloads. For now the goal is to only parse and format the XML. Both will be required to be provided in order to uniquely identify the desired SCSI host. The new XML is expected to be as follows: <adapter type='scsi_host'> <parentaddr unique_id='3'> <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/> </parentaddr> </adapter> where "parentaddr" is the parent device of the SCSI host using the PCI address on which the device resides and the value from the unique_id file for the device. Both the PCI address and unique_id values will be used to traverse the /sys/class/scsi_host/ directories looking at each link to match the PCI address reformatted to the directory link format where "domain:bus:slot:function" is found. Then for each matching directory the unique_id file for the scsi_host will be used to match the unique_id value in the xml. For a PCI address listed above, this will be formatted to "0000:00:1f.2" and the links in /sys/class/scsi_host will be used to find the host# to be used for the 'scsi_host' device. Each entry is a link to the /sys/bus/pci/devices directories, e.g.: % ls -al /sys/class/scsi_host/host2 lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2 % cat /sys/class/scsi_host/host2/unique_id 3 The "parentaddr" and "name" attributes are mutually exclusive to identify the SCSI host number. Use of the "parentaddr" element will be the preferred mechanism. This patch only supports to parse and format the XMLs. Later patches will add code to find out the scsi host number.
2014-03-04 03:15:13 +00:00
<span class="since">Since 1.0.4</span>
</dd>
</dl>
<dl>
<dt><code>parent</code></dt>
<dd>Used by the "fc_host" adapter type to optionally specify the
parent scsi_host device defined in the
<a href="formatnode.html">Node Device</a> database as the
<a href="http://wiki.libvirt.org/page/NPIV_in_libvirt">NPIV</a>
virtual Host Bus Adapter (vHBA). The value provided must be
a vport capable scsi_host. The value is not the scsi_host of
the vHBA created by 'virsh nodedev-create', rather it is
the parent of that vHBA. If the value is not provided, libvirt
will determine the parent based either finding the wwnn,wwpn
defined for an existing scsi_host or by creating a vHBA. Providing
the parent attribute is also useful for the duplicate pool
definition checks. This is more important in environments where
both the "fc_host" and "scsi_host" source adapter pools are being
used in order to ensure a new definition doesn't duplicate using
the scsi_hostN of some existing storage pool.
storage: Introduce parentaddr into virStoragePoolSourceAdapter Between reboots and kernel reloads, the SCSI host number used for SCSI storage pools may change requiring modification to the storage pool XML in order to use a specific SCSI host adapter. This patch introduces the "parentaddr" element and "unique_id" attribute for the SCSI host adapter in order to uniquely identify the adapter between reboots and kernel reloads. For now the goal is to only parse and format the XML. Both will be required to be provided in order to uniquely identify the desired SCSI host. The new XML is expected to be as follows: <adapter type='scsi_host'> <parentaddr unique_id='3'> <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/> </parentaddr> </adapter> where "parentaddr" is the parent device of the SCSI host using the PCI address on which the device resides and the value from the unique_id file for the device. Both the PCI address and unique_id values will be used to traverse the /sys/class/scsi_host/ directories looking at each link to match the PCI address reformatted to the directory link format where "domain:bus:slot:function" is found. Then for each matching directory the unique_id file for the scsi_host will be used to match the unique_id value in the xml. For a PCI address listed above, this will be formatted to "0000:00:1f.2" and the links in /sys/class/scsi_host will be used to find the host# to be used for the 'scsi_host' device. Each entry is a link to the /sys/bus/pci/devices directories, e.g.: % ls -al /sys/class/scsi_host/host2 lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2 % cat /sys/class/scsi_host/host2/unique_id 3 The "parentaddr" and "name" attributes are mutually exclusive to identify the SCSI host number. Use of the "parentaddr" element will be the preferred mechanism. This patch only supports to parse and format the XMLs. Later patches will add code to find out the scsi host number.
2014-03-04 03:15:13 +00:00
<span class="since">Since 1.0.4</span>
</dd>
<dt><code>parent_wwnn</code> and <code>parent_wwpn</code></dt>
<dd>Instead of the <code>parent</code> to specify which scsi_host
to use by name, it's possible to provide the wwnn and wwpn of
the parent to be used for the vHBA in order to ensure that
between reboots or after a hardware configuration change that
the scsi_host parent name doesn't change. Both the parent_wwnn
and parent_wwpn must be provided.
<span class="since">Since 3.0.0</span>
</dd>
<dt><code>parent_fabric_wwn</code></dt>
<dd>Instead of the <code>parent</code> to specify which scsi_host
to use by name, it's possible to provide the fabric_wwn on which
the scsi_host exists. This provides flexibility for choosing
a scsi_host that may be available on the fabric rather than
requiring a specific parent by wwnn or wwpn to be available.
<span class="since">Since 3.0.0</span>
</dd>
storage: Introduce 'managed' for the fchost parent https://bugzilla.redhat.com/show_bug.cgi?id=1160926 Introduce a 'managed' attribute to allow libvirt to decide whether to delete a vHBA vport created via external means such as nodedev-create. The code currently decides whether to delete the vHBA based solely on whether the parent was provided at creation time. However, that may not be the desired action, so rather than delete and force someone to create another vHBA via an additional nodedev-create allow the configuration of the storage pool to decide the desired action. During createVport when libvirt does the VPORT_CREATE, set the managed value to YES if not already set to indicate to the deleteVport code that it should delete the vHBA when the pool is destroyed. If libvirtd is restarted all the memory only state was lost, so for a persistent storage pool, use the virStoragePoolSaveConfig in order to write out the managed value. Because we're now saving the current configuration, we need to be sure to not save the parent in the output XML if it was undefined at start. Saving the name would cause future starts to always use the same parent which is not the expected result when not providing a parent. By not providing a parent, libvirt is expected to find the best available vHBA port for each subsequent (re)start. At deleteVport, use the new managed value to decide whether to execute the VPORT_DELETE. Since we no longer save the parent in memory or in XML when provided, if it was not provided, then we have to look it up.
2014-11-10 16:19:51 +00:00
<dt><code>managed</code></dt>
<dd>An optional attribute to instruct the SCSI storage backend to
manage destroying the vHBA when the pool is destroyed. For
configurations that do not provide an already created vHBA
from a 'virsh nodedev-create', libvirt will set this property
to "yes". For configurations that have already created a vHBA
via 'virsh nodedev-create' and are using the wwnn/wwpn from
that vHBA and optionally the scsi_host parent, setting this
attribute to "yes" will allow libvirt to destroy the node device
when the pool is destroyed. If this attribute is set to "no" or
not defined in the XML, then libvirt will not destroy the vHBA.
<span class="since">Since 1.2.11</span>
</dd>
storage: Introduce parentaddr into virStoragePoolSourceAdapter Between reboots and kernel reloads, the SCSI host number used for SCSI storage pools may change requiring modification to the storage pool XML in order to use a specific SCSI host adapter. This patch introduces the "parentaddr" element and "unique_id" attribute for the SCSI host adapter in order to uniquely identify the adapter between reboots and kernel reloads. For now the goal is to only parse and format the XML. Both will be required to be provided in order to uniquely identify the desired SCSI host. The new XML is expected to be as follows: <adapter type='scsi_host'> <parentaddr unique_id='3'> <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/> </parentaddr> </adapter> where "parentaddr" is the parent device of the SCSI host using the PCI address on which the device resides and the value from the unique_id file for the device. Both the PCI address and unique_id values will be used to traverse the /sys/class/scsi_host/ directories looking at each link to match the PCI address reformatted to the directory link format where "domain:bus:slot:function" is found. Then for each matching directory the unique_id file for the scsi_host will be used to match the unique_id value in the xml. For a PCI address listed above, this will be formatted to "0000:00:1f.2" and the links in /sys/class/scsi_host will be used to find the host# to be used for the 'scsi_host' device. Each entry is a link to the /sys/bus/pci/devices directories, e.g.: % ls -al /sys/class/scsi_host/host2 lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2 % cat /sys/class/scsi_host/host2/unique_id 3 The "parentaddr" and "name" attributes are mutually exclusive to identify the SCSI host number. Use of the "parentaddr" element will be the preferred mechanism. This patch only supports to parse and format the XMLs. Later patches will add code to find out the scsi host number.
2014-03-04 03:15:13 +00:00
</dl>
<dl>
<dt><code>parentaddr</code></dt>
<dd>Used by the "scsi_host" adapter type instead of the
<code>name</code> attribute to more uniquely identify the
SCSI host. Using a combination of the <code>unique_id</code>
attribute and the <code>address</code> element to formulate
a PCI address, a search will be performed of the
<code>/sys/class/scsi_host/hostNN</code> links for a
matching PCI address with a matching <code>unique_id</code>
value in the <code>/sys/class/scsi_host/hostNN/unique_id</code>
file. The value in the "unique_id" file will be unique enough
for the specific PCI address. The <code>hostNN</code> will be
used by libvirt as the basis to define which SCSI host is to
be used for the currently booted system.
<span class="since">Since 1.2.7</span>
<dl>
<dt><code>address</code></dt>
<dd>The PCI address of the scsi_host device to be used. Using
a PCI address provides consistent naming across system reboots
and kernel reloads. The address will have four attributes:
<code>domain</code> (a 2-byte hex integer, not currently used
by qemu), <code>bus</code> (a hex value between 0 and 0xff,
inclusive), <code>slot</code> (a hex value between 0x0 and
0x1f, inclusive), and <code>function</code> (a value between
0 and 7, inclusive). The PCI address can be determined by
listing the <code>/sys/bus/pci/devices</code> and the
<code>/sys/class/scsi_host</code> directories in order to
find the expected scsi_host device. The address will be
provided in a format such as "0000:00:1f:2" which can be
used to generate the expected PCI address
"domain='0x0000' bus='0x00' slot='0x1f' function='0x0'".
Optionally, using the combination of the commands 'virsh
nodedev-list scsi_host' and 'virsh nodedev-dumpxml' for a
specific list entry and converting the resulting
<code>path</code> element as the basis to formulate the
correctly formatted PCI address.
</dd>
</dl>
<dl>
<dt><code>unique_id</code></dt>
<dd>Required <code>parentaddr</code> attribute used to determine
which of the scsi_host adapters for the provided PCI address
should be used. The value is determine by contents of the
<code>unique_id</code> file for the specific scsi_host adapter.
For a PCI address of "0000:00:1f:2", the unique identifer files
can be found using the command
<code>find -H /sys/class/scsi_host/host*/unique_id |
xargs grep '[0-9]'</code>. Optionally, the
<code>virsh nodedev-dumpxml scsi_hostN</code>' of a
specific scsi_hostN list entry will list the
<code>unique_id</code> value.
storage: Introduce parentaddr into virStoragePoolSourceAdapter Between reboots and kernel reloads, the SCSI host number used for SCSI storage pools may change requiring modification to the storage pool XML in order to use a specific SCSI host adapter. This patch introduces the "parentaddr" element and "unique_id" attribute for the SCSI host adapter in order to uniquely identify the adapter between reboots and kernel reloads. For now the goal is to only parse and format the XML. Both will be required to be provided in order to uniquely identify the desired SCSI host. The new XML is expected to be as follows: <adapter type='scsi_host'> <parentaddr unique_id='3'> <address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/> </parentaddr> </adapter> where "parentaddr" is the parent device of the SCSI host using the PCI address on which the device resides and the value from the unique_id file for the device. Both the PCI address and unique_id values will be used to traverse the /sys/class/scsi_host/ directories looking at each link to match the PCI address reformatted to the directory link format where "domain:bus:slot:function" is found. Then for each matching directory the unique_id file for the scsi_host will be used to match the unique_id value in the xml. For a PCI address listed above, this will be formatted to "0000:00:1f.2" and the links in /sys/class/scsi_host will be used to find the host# to be used for the 'scsi_host' device. Each entry is a link to the /sys/bus/pci/devices directories, e.g.: % ls -al /sys/class/scsi_host/host2 lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2 % cat /sys/class/scsi_host/host2/unique_id 3 The "parentaddr" and "name" attributes are mutually exclusive to identify the SCSI host number. Use of the "parentaddr" element will be the preferred mechanism. This patch only supports to parse and format the XMLs. Later patches will add code to find out the scsi host number.
2014-03-04 03:15:13 +00:00
</dd>
</dl>
</dd>
</dl>
</dd>
<dt><code>host</code></dt>
<dd>Provides the source for pools backed by storage from a
remote server (pool types <code>netfs</code>, <code>iscsi</code>,
<code>rbd</code>, <code>sheepdog</code>, <code>gluster</code>). Will be
used in combination with a <code>directory</code>
or <code>device</code> element. Contains an attribute <code>name</code>
which is the hostname or IP address of the server. May optionally
contain a <code>port</code> attribute for the protocol specific
port number. Duplicate storage pool definition checks may perform
a cursory check that the same host name by string comparison in the
new pool does not match an existing pool's source host name when
combined with the <code>directory</code> or <code>device</code>
element. Name resolution of the provided hostname or IP address
is left to the storage driver backend interactions with the remote
server. See the <a href="storage.html">storage driver page</a> for
any restrictions for specific storage backends.
<span class="since">Since 0.4.1</span></dd>
<dt><code>auth</code></dt>
<dd>If present, the <code>auth</code> element provides the
authentication credentials needed to access the source by the
setting of the <code>type</code> attribute (pool
types <code>iscsi</code>, <code>rbd</code>). The <code>type</code>
must be either "chap" or "ceph". Use "ceph" for
Ceph RBD (Rados Block Device) network sources and use "iscsi" for CHAP
(Challenge-Handshake Authentication Protocol) iSCSI
targets. Additionally a mandatory attribute
<code>username</code> identifies the username to use during
authentication as well as a sub-element <code>secret</code> with
a mandatory attribute <code>type</code>, to tie back to a
<a href="formatsecret.html">libvirt secret object</a> that
holds the actual password or other credentials. The domain XML
intentionally does not expose the password, only the reference
to the object that manages the password.
The <code>secret</code> element requires either a <code>uuid</code>
attribute with the UUID of the secret object or a <code>usage</code>
attribute matching the key that was specified in the
secret object. <span class="since">Since 0.9.7 for "ceph" and
1.1.1 for "chap"</span>
</dd>
<dt><code>name</code></dt>
<dd>Provides the source for pools backed by storage from a
named element (pool types <code>logical</code>, <code>rbd</code>,
<code>sheepdog</code>, <code>gluster</code>). Contains a
string identifier.
<span class="since">Since 0.4.5</span></dd>
<dt><code>format</code></dt>
<dd>Provides information about the format of the pool (pool
types <code>fs</code>, <code>netfs</code>, <code>disk</code>,
<code>logical</code>). This
contains a single attribute <code>type</code> whose value is
backend specific. This is typically used to indicate filesystem
type, or network filesystem type, or partition table type, or
LVM metadata type. All drivers are required to have a default
value for this, so it is optional. <span class="since">Since 0.4.1</span></dd>
<dt><code>vendor</code></dt>
<dd>Provides optional information about the vendor of the
storage device. This contains a single
attribute <code>name</code> whose value is backend
specific. <span class="since">Since 0.8.4</span></dd>
<dt><code>product</code></dt>
<dd>Provides an optional product name of the storage device.
This contains a single attribute <code>name</code> whose value
is backend specific. <span class="since">Since 0.8.4</span></dd>
</dl>
<h3><a name="StoragePoolTarget">Target elements</a></h3>
<p>
A single <code>target</code> element is contained within the top level
<code>pool</code> element for some types of pools (pool
types <code>dir</code>, <code>fs</code>, <code>netfs</code>,
<code>logical</code>, <code>disk</code>, <code>iscsi</code>,
<code>scsi</code>, <code>mpath</code>, <code>zfs</code>).
This tag is used to describe the mapping of
the storage pool into the host filesystem. It can contain the following
child elements:
</p>
<pre>
...
&lt;target&gt;
&lt;path&gt;/dev/disk/by-path&lt;/path&gt;
&lt;permissions&gt;
&lt;owner&gt;107&lt;/owner&gt;
&lt;group&gt;107&lt;/group&gt;
&lt;mode&gt;0744&lt;/mode&gt;
&lt;label&gt;virt_image_t&lt;/label&gt;
&lt;/permissions&gt;
&lt;/target&gt;
&lt;/pool&gt;</pre>
<dl>
<dt><code>path</code></dt>
<dd>Provides the location at which the pool will be mapped into
the local filesystem namespace, as an absolute path. For a
filesystem/directory based pool it will be a fully qualified name of
the directory in which volumes will be created. For device based pools
it will be a fully qualified name of the directory in which
devices nodes exist. For the latter <code>/dev/</code> may seem
like the logical choice, however, devices nodes there are not
guaranteed stable across reboots, since they are allocated on
demand. It is preferable to use a stable location such as one
of the <code>/dev/disk/by-{path|id|uuid|label}</code> locations.
For <code>logical</code> and <code>zfs</code> pool types, a
provided value is ignored and a default path generated.
For a Multipath pool (type <code>mpath</code>), the provided
value is ignored and the default value of "/dev/mapper" is used.
<span class="since">Since 0.4.1</span>
</dd>
<dt><code>permissions</code></dt>
<dd>This is currently only useful for directory or filesystem based
pools, which are mapped as a directory into the local filesystem
namespace. It provides information about the permissions to use for the
final directory when the pool is built. There are 4 child elements.
The <code>mode</code> element contains the octal permission set.
The <code>mode</code> defaults to 0755 when not provided.
The <code>owner</code> element contains the numeric user ID.
The <code>group</code> element contains the numeric group ID.
If <code>owner</code> or <code>group</code> aren't specified when
creating a directory, the values are inherited from the parent
directory. The <code>label</code> element contains the MAC (eg SELinux)
label string.
<span class="since">Since 0.4.1</span>
For running directory or filesystem based pools, these fields
will be filled with the values used by the existing directory.
<span class="since">Since 1.2.16</span>
</dd>
</dl>
<h3><a name="StoragePoolExtents">Device extents</a></h3>
<p>
If a storage pool exposes information about its underlying
placement / allocation scheme, the <code>device</code> element
within the <code>source</code> element may contain information
about its available extents. Some pools have a constraint that
a volume must be allocated entirely within a single constraint
(eg disk partition pools). Thus the extent information allows an
application to determine the maximum possible size for a new
volume
</p>
<p>
For storage pools supporting extent information, within each
<code>device</code> element there will be zero or more <code>freeExtent</code>
elements. Each of these elements contains two attributes, <code>start</code>
and <code>end</code> which provide the boundaries of the extent on the
device, measured in bytes. <span class="since">Since 0.4.1</span>
</p>
<h2><a name="StorageVol">Storage volume XML</a></h2>
<p>
A storage volume will generally be either a file or a device
node; <span class="since">since 1.2.0</span>, an optional
output-only attribute <code>type</code> lists the actual type
(file, block, dir, network, netdir or ploop), which is also available
from <code>virStorageVolGetInfo()</code>. The storage volume
XML format is available <span class="since">since 0.4.1</span>
</p>
<h3><a name="StorageVolFirst">General metadata</a></h3>
<pre>
&lt;volume type='file'&gt;
&lt;name&gt;sparse.img&lt;/name&gt;
&lt;key&gt;/var/lib/xen/images/sparse.img&lt;/key&gt;
&lt;allocation&gt;0&lt;/allocation&gt;
&lt;capacity unit="T"&gt;1&lt;/capacity&gt;
...</pre>
<dl>
<dt><code>name</code></dt>
<dd>Providing a name for the volume which is unique to the pool.
This is mandatory when defining a volume. For a disk pool, the
name must be combination of the <code>source</code> device path
device and next partition number to be created. For example, if
the <code>source</code> device path is /dev/sdb and there are no
partitions on the disk, then the name must be sdb1 with the next
name being sdb2 and so on.
<span class="since">Since 0.4.1</span></dd>
<dt><code>key</code></dt>
<dd>Providing an identifier for the volume which identifies a
single volume. In some cases it's possible to have two distinct keys
identifying a single volume. This field cannot be set when creating
a volume: it is always generated.
<span class="since">Since 0.4.1</span></dd>
<dt><code>allocation</code></dt>
<dd>Providing the total storage allocation for the volume. This
may be smaller than the logical capacity if the volume is sparsely
allocated. It may also be larger than the logical capacity if the
volume has substantial metadata overhead. This value is in bytes.
If omitted when creating a volume, the volume will be fully
allocated at time of creation. If set to a value smaller than the
capacity, the pool has the <strong>option</strong> of deciding
to sparsely allocate a volume. It does not have to honour requests
for sparse allocation though. Different types of pools may treat
sparse volumes differently. For example, the <code>logical</code>
pool will not automatically expand volume's allocation when it
gets full; the user is responsible for doing that or configuring
dmeventd to do so automatically.<br/>
<br/>
By default this is specified in bytes, but an optional attribute
<code>unit</code> can be specified to adjust the passed value.
Values can be: 'B' or 'bytes' for bytes, 'KB' (kilobytes,
10<sup>3</sup> or 1000 bytes), 'K' or 'KiB' (kibibytes,
2<sup>10</sup> or 1024 bytes), 'MB' (megabytes, 10<sup>6</sup>
or 1,000,000 bytes), 'M' or 'MiB' (mebibytes, 2<sup>20</sup>
or 1,048,576 bytes), 'GB' (gigabytes, 10<sup>9</sup> or
1,000,000,000 bytes), 'G' or 'GiB' (gibibytes, 2<sup>30</sup>
or 1,073,741,824 bytes), 'TB' (terabytes, 10<sup>12</sup> or
1,000,000,000,000 bytes), 'T' or 'TiB' (tebibytes,
2<sup>40</sup> or 1,099,511,627,776 bytes), 'PB' (petabytes,
10<sup>15</sup> or 1,000,000,000,000,000 bytes), 'P' or 'PiB'
(pebibytes, 2<sup>50</sup> or 1,125,899,906,842,624 bytes),
'EB' (exabytes, 10<sup>18</sup> or 1,000,000,000,000,000,000
bytes), or 'E' or 'EiB' (exbibytes, 2<sup>60</sup> or
1,152,921,504,606,846,976 bytes). <span class="since">Since
0.4.1, multi-character <code>unit</code> since
0.9.11</span></dd>
<dt><code>capacity</code></dt>
<dd>Providing the logical capacity for the volume. This value is
in bytes by default, but a <code>unit</code> attribute can be
specified with the same semantics as for <code>allocation</code>
This is compulsory when creating a volume.
<span class="since">Since 0.4.1</span></dd>
<dt><code>physical</code></dt>
<dd>This output only element provides the host physical size of
the target storage volume. The default output <code>unit</code>
will be in bytes.
<span class="since">Since 3.0.0</span></dd>
<dt><code>source</code></dt>
<dd>Provides information about the underlying storage allocation
of the volume. This may not be available for some pool types.
<span class="since">Since 0.4.1</span></dd>
<dt><code>target</code></dt>
<dd>Provides information about the representation of the volume
on the local host. <span class="since">Since 0.4.1</span></dd>
</dl>
<h3><a name="StorageVolTarget">Target elements</a></h3>
<p>
A single <code>target</code> element is contained within the top level
<code>volume</code> element. This tag is used to describe the mapping of
the storage volume into the host filesystem. It can contain the following
child elements:
</p>
<pre>
...
&lt;target&gt;
&lt;path&gt;/var/lib/virt/images/sparse.img&lt;/path&gt;
&lt;format type='qcow2'/&gt;
&lt;permissions&gt;
&lt;owner&gt;107&lt;/owner&gt;
&lt;group&gt;107&lt;/group&gt;
&lt;mode&gt;0744&lt;/mode&gt;
&lt;label&gt;virt_image_t&lt;/label&gt;
&lt;/permissions&gt;
&lt;timestamps&gt;
&lt;atime&gt;1341933637.273190990&lt;/atime&gt;
&lt;mtime&gt;1341930622.047245868&lt;/mtime&gt;
&lt;ctime&gt;1341930622.047245868&lt;/ctime&gt;
&lt;/timestamps&gt;
&lt;encryption type='...'&gt;
...
&lt;/encryption&gt;
&lt;compat&gt;1.1&lt;/compat&gt;
&lt;nocow/&gt;
&lt;features&gt;
&lt;lazy_refcounts/&gt;
&lt;/features&gt;
&lt;/target&gt;</pre>
<dl>
<dt><code>path</code></dt>
<dd>Provides the location at which the volume can be accessed on
the local filesystem, as an absolute path. This is a readonly
attribute, so shouldn't be specified when creating a volume.
<span class="since">Since 0.4.1</span></dd>
<dt><code>format</code></dt>
<dd>Provides information about the pool specific volume format.
For disk pools it will provide the partition table format type, but is
not preserved after a pool refresh or libvirtd restart. Use extended
in order to create an extended disk extent partition. For filesystem
or directory pools it will provide the file format type, eg cow,
qcow, vmdk, raw. If omitted when creating a volume, the pool's
default format will be used. The actual format is specified via
the <code>type</code> attribute. Consult the
<a href="storage.html">storage driver page</a> for the list of valid
volume format type values for each specific pool. The
<code>format</code> will be ignored on input for pools without a
volume format type value and the default pool format will be used.
<span class="since">Since 0.4.1</span></dd>
<dt><code>permissions</code></dt>
<dd>Provides information about the permissions to use
when creating volumes. This is currently only useful for directory
or filesystem based pools, where the volumes allocated are simple
files. For pools where the volumes are device nodes, the hotplug
scripts determine permissions. There are 4 child elements.
The <code>mode</code> element contains the octal permission set.
The <code>mode</code> defaults to 0600 when not provided.
The <code>owner</code> element contains the numeric user ID.
The <code>group</code> element contains the numeric group ID.
If <code>owner</code> or <code>group</code> aren't specified when
creating a supported volume, the values are inherited from the parent
directory. The <code>label</code> element contains the MAC (eg SELinux)
label string.
For existing directory or filesystem based volumes, these fields
will be filled with the values used by the existing file.
<span class="since">Since 0.4.1</span>
</dd>
<dt><code>timestamps</code></dt>
<dd>Provides timing information about the volume. Up to four
sub-elements are present,
where <code>atime</code>, <code>btime</code>, <code>ctime</code>
and <code>mtime</code> hold the access, birth, change and
modification time of the volume, where known. The used time
format is &lt;seconds&gt;.&lt;nanoseconds&gt; since the
beginning of the epoch (1 Jan 1970). If nanosecond resolution
is 0 or otherwise unsupported by the host OS or filesystem,
then the nanoseconds part is omitted. This is a readonly
attribute and is ignored when creating a volume.
<span class="since">Since 0.10.0</span>
</dd>
<dt><code>encryption</code></dt>
<dd>If present, specifies how the volume is encrypted. See
the <a href="formatstorageencryption.html">Storage Encryption</a> page
for more information.
</dd>
<dt><code>compat</code></dt>
<dd>Specify compatibility level. So far, this is only used for
<code>type='qcow2'</code> volumes. Valid values are <code>0.10</code>
and <code>1.1</code> so far, specifying QEMU version the images should
be compatible with. If the <code>feature</code> element is present,
1.1 is used.
<span class="since">Since 1.1.0</span> If omitted, 0.10 is used.
<span class="since">Since 1.1.2</span>
</dd>
<dt><code>nocow</code></dt>
<dd>Turn off COW of the newly created volume. So far, this is only valid
for a file image in btrfs file system. It will improve performance when
the file image is used in VM. To create non-raw file images, it
requires QEMU version since 2.1. <span class="since">Since 1.2.7</span>
</dd>
<dt><code>features</code></dt>
<dd>Format-specific features. Only used for <code>qcow2</code> now.
Valid sub-elements are:
<ul>
<li><code>&lt;lazy_refcounts/&gt;</code> - allow delayed reference
counter updates. <span class="since">Since 1.1.0</span></li>
</ul>
</dd>
</dl>
<h3><a name="StorageVolBacking">Backing store elements</a></h3>
<p>
A single <code>backingStore</code> element is contained within the top level
<code>volume</code> element. This tag is used to describe the optional copy
on write, backing store for the storage volume. It can contain the following
child elements:
</p>
<pre>
...
&lt;backingStore&gt;
&lt;path&gt;/var/lib/virt/images/master.img&lt;/path&gt;
&lt;format type='raw'/&gt;
&lt;permissions&gt;
&lt;owner&gt;107&lt;/owner&gt;
&lt;group&gt;107&lt;/group&gt;
&lt;mode&gt;0744&lt;/mode&gt;
&lt;label&gt;virt_image_t&lt;/label&gt;
&lt;/permissions&gt;
&lt;/backingStore&gt;
&lt;/volume&gt;</pre>
<dl>
<dt><code>path</code></dt>
<dd>Provides the location at which the backing store can be accessed on
the local filesystem, as an absolute path. If omitted, there is no
backing store for this volume.
<span class="since">Since 0.6.0</span></dd>
<dt><code>format</code></dt>
<dd>Provides information about the pool specific backing store format.
For disk pools it will provide the partition type. For filesystem
or directory pools it will provide the file format type, eg cow,
qcow, vmdk, raw. The actual format is specified via the type attribute.
Consult the pool-specific docs for the list of valid
values. Most file formats require a backing store of the same format,
however, the qcow2 format allows a different backing store format.
<span class="since">Since 0.6.0</span></dd>
<dt><code>permissions</code></dt>
<dd>Provides information about the permissions of the backing file.
See volume <code>permissions</code> documentation for explanation
of individual fields.
<span class="since">Since 0.6.0</span>
</dd>
</dl>
<h2><a name="examples">Example configuration</a></h2>
<p>
Here are a couple of examples, for a more complete set demonstrating
every type of storage pool, consult the <a href="storage.html">storage driver page</a>
</p>
<h3><a name="exampleFile">File based storage pool</a></h3>
<pre>
&lt;pool type="dir"&gt;
&lt;name&gt;virtimages&lt;/name&gt;
&lt;target&gt;
&lt;path&gt;/var/lib/virt/images&lt;/path&gt;
&lt;/target&gt;
&lt;/pool&gt;</pre>
<h3><a name="exampleISCSI">iSCSI based storage pool</a></h3>
<pre>
&lt;pool type="iscsi"&gt;
&lt;name&gt;virtimages&lt;/name&gt;
&lt;source&gt;
&lt;host name="iscsi.example.com"/&gt;
&lt;device path="iqn.2013-06.com.example:iscsi-pool"/&gt;
&lt;auth type='chap' username='myuser'&gt;
&lt;secret usage='libvirtiscsi'/&gt;
&lt;/auth&gt;
&lt;/source&gt;
&lt;target&gt;
&lt;path&gt;/dev/disk/by-path&lt;/path&gt;
&lt;/target&gt;
&lt;/pool&gt;</pre>
<h3><a name="exampleVol">Storage volume</a></h3>
<pre>
&lt;volume&gt;
&lt;name&gt;sparse.img&lt;/name&gt;
&lt;allocation&gt;0&lt;/allocation&gt;
&lt;capacity unit="T"&gt;1&lt;/capacity&gt;
&lt;target&gt;
&lt;path&gt;/var/lib/virt/images/sparse.img&lt;/path&gt;
&lt;permissions&gt;
&lt;owner&gt;107&lt;/owner&gt;
&lt;group&gt;107&lt;/group&gt;
&lt;mode&gt;0744&lt;/mode&gt;
&lt;label&gt;virt_image_t&lt;/label&gt;
&lt;/permissions&gt;
&lt;/target&gt;
&lt;/volume&gt;</pre>
<h3><a name="exampleLuks">Storage volume using LUKS</a></h3>
<pre>
&lt;volume&gt;
&lt;name&gt;MyLuks.img&lt;/name&gt;
&lt;capacity unit="G"&gt;5&lt;/capacity&gt;
&lt;target&gt;
&lt;path&gt;/var/lib/virt/images/MyLuks.img&lt;/path&gt;
&lt;format type='raw'/&gt;
&lt;encryption format='luks'&gt;
&lt;secret type='passphrase' uuid='f52a81b2-424e-490c-823d-6bd4235bc572'/&gt;
&lt;/encryption&gt;
&lt;/target&gt;
&lt;/volume&gt;
</pre>
</body>
</html>