External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-11-05 12:51:12 +00:00
Code Issues Packages Projects Releases Wiki Activity
3a6a725b8f
libvirt/tests/qemuxml2argvdata/disk-network-gluster.args

43 lines
1.6 KiB
Plaintext
Raw Normal View History

tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
LC_ALL=C \
PATH=/bin \
qemu: command: Override HOME variable for system QEMU By default, qemu user's home dir points to '/' which shouldn't be used at all. We therefore pass the HOME variable from the current variable iff not running as SUID, which means that for systemd we never set it. This patch makes sure, that for system QEMU this is always set to libDir/<driver>, session mode is left untouched. Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-06 12:29:01 +00:00
HOME=/tmp/lib/domain--1-QEMUGuest1 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
USER=test \
LOGNAME=test \
qemu: command: Enforce setting XDG variables for system QEMU For session mode, only XDG_CACHE_HOME is set, because we want to remain integrating with services in user session, but for system mode, this would have become reading/writing to '/' which carries the obvious issue with permissions (also, '/' is the wrong location in 99.9% cases anyway). Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-08 11:15:07 +00:00
XDG_DATA_HOME=/tmp/lib/domain--1-QEMUGuest1/.local/share \
XDG_CACHE_HOME=/tmp/lib/domain--1-QEMUGuest1/.cache \
XDG_CONFIG_HOME=/tmp/lib/domain--1-QEMUGuest1/.config \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
QEMU_AUDIO_DRV=none \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
/usr/bin/qemu-system-i686 \
qemu: assume -name is always available The -name arg was added in QEMU 0.9.1, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:41 +00:00
-name QEMUGuest1 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-S \
qemu: deprecate QEMU_CAPS_MACHINE_USB_OPT Implied by QEMU >= 1.3.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-machine pc,accel=tcg,usb=off,dump-guest-core=off \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-m 214 \
qemu: Always assume QEMU_CAPS_REALTIME_MLOCK The '-realtime mlock' cmd line argument was introduced in QEMU commit v1.5.0-rc0~190 which matches minimal QEMU version we require. Therefore, the capability will always be present. Apparently, nearly none of our xml2argv test cases had the capability hence slightly bigger change under qemuxml2argvdata/. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-12 08:03:36 +00:00
-realtime mlock=off \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 11:29:16 +00:00
-smp 1,sockets=1,cores=1,threads=1 \
qemu: assume -uuid is always available The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:52 +00:00
-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \
qemu: deprecate QEMU_CAPS_DISPLAY Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-display none \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-user-config \
tests: Unconditionally enable QEMU_CAPS_DEVICE QEMU_CAPS_DEVICE is always enabled for qemu binaries we support. Sync qemuxml2* to match, and regenerate all test output.
2016-01-13 00:26:40 +00:00
-nodefaults \
qemu: command: always use -chardev for monitor config AFAIK there aren't any cases where we will/should hit the old code path for our supported qemu versions, so drop the old code. Massive test suite churn follows Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2017-06-26 14:40:39 +00:00
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-QEMUGuest1/monitor.sock,\
server,nowait \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-28 22:04:58 +00:00
-mon chardev=charmonitor,id=monitor,mode=control \
qemu: deprecate QEMU_CAPS_RTC Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-rtc base=utc \
qemu: deprecate QEMU_CAPS_NO_SHUTDOWN Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-shutdown \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-no-acpi \
-usb \
qemu: command: Add debug option for gluster volumes Propagate the selected or default level to qemu if it's supported. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2016-10-14 03:37:45 +00:00
-drive file=gluster://example.org:6000/Volume1/Image,file.debug=4,format=raw,\
if=none,id=drive-virtio-disk0 \
tests: Unconditionally enable QEMU_CAPS_DEVICE QEMU_CAPS_DEVICE is always enabled for qemu binaries we support. Sync qemuxml2* to match, and regenerate all test output.
2016-01-13 00:26:40 +00:00
-device virtio-blk-pci,bus=pci.0,addr=0x3,drive=drive-virtio-disk0,\
qemu: capabilities: Always assume QEMU_CAPS_BOOTINDEX The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported qemu versions now use it. There's a LOT of test fallout as we did not use capabilities close enough to upstream for many of our tests. Several tests had a 'bootindex' variant. Since they'd become redundant they are also removed here. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-08-09 11:26:17 +00:00
id=virtio-disk0,bootindex=1 \
qemu: command: Add debug option for gluster volumes Propagate the selected or default level to qemu if it's supported. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2016-10-14 03:37:45 +00:00
-drive 'file=gluster+unix:///Volume2/Image?socket=/path/to/sock,file.debug=4,\
qemu: domain: Assume 'raw' default storage format also for network storage Post parse callback adds the 'raw' type only for local files. Remote files can also have backing store (even local) so we should do this also for network backed storage. Note that virStorageFileGetMetadata always considers files with no type as raw so we will not accidentally traverse the backing chain and allow unexpected files being labelled with svirt labels. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-10-04 12:43:46 +00:00
format=raw,if=none,id=drive-virtio-disk1' \
tests: Unconditionally enable QEMU_CAPS_DEVICE QEMU_CAPS_DEVICE is always enabled for qemu binaries we support. Sync qemuxml2* to match, and regenerate all test output.
2016-01-13 00:26:40 +00:00
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk1,\
qemu: command: Add support for multi-host gluster disks To allow using failover with gluster it's necessary to specify multiple volume hosts. Add support for starting qemu with such configurations. Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2016-07-25 13:24:54 +00:00
id=virtio-disk1 \
storage: Don't store leading '/' in image name when splitting out volume Libvirt historically stores storage source path including the volume as one string in the XML, but that is not really flexible enough when dealing with the fields in the code. Previously we'd store the slash separating the two as part of the image name. This was fine for gluster but it's not necessary and does not scale well when converting other protocols. Don't store the slash as part of the path. The resulting change from absolute to relative path within the gluster driver should be okay, as the root directory is the default when accessing gluster.
2017-10-23 14:39:49 +00:00
-drive file.driver=gluster,file.volume=Volume3,file.path=Image.qcow2,\
qemu: command: Add support for multi-host gluster disks To allow using failover with gluster it's necessary to specify multiple volume hosts. Add support for starting qemu with such configurations. Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2016-07-25 13:24:54 +00:00
file.server.0.type=tcp,file.server.0.host=example.org,file.server.0.port=6000,\
file.server.1.type=tcp,file.server.1.host=example.org,file.server.1.port=24007,\
qemu: command: Add debug option for gluster volumes Propagate the selected or default level to qemu if it's supported. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2016-10-14 03:37:45 +00:00
file.server.2.type=unix,file.server.2.socket=/path/to/sock,file.debug=4,\
format=qcow2,if=none,id=drive-virtio-disk2 \
qemu: command: Add support for multi-host gluster disks To allow using failover with gluster it's necessary to specify multiple volume hosts. Add support for starting qemu with such configurations. Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2016-07-25 13:24:54 +00:00
-device virtio-blk-pci,bus=pci.0,addr=0x5,drive=drive-virtio-disk2,\
id=virtio-disk2
Reference in New Issue Copy Permalink