External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-11-05 04:41:20 +00:00
Code Issues Packages Projects Releases Wiki Activity
415e022118
libvirt/tests/qemuxml2argvdata/autoindex.args

62 lines
2.9 KiB
Plaintext
Raw Normal View History

conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
LC_ALL=C \
PATH=/bin \
qemu: command: Override HOME variable for system QEMU By default, qemu user's home dir points to '/' which shouldn't be used at all. We therefore pass the HOME variable from the current variable iff not running as SUID, which means that for systemd we never set it. This patch makes sure, that for system QEMU this is always set to libDir/<driver>, session mode is left untouched. Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-06 12:29:01 +00:00
HOME=/tmp/lib/domain--1-q35-test \
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
USER=test \
LOGNAME=test \
qemu: command: Enforce setting XDG variables for system QEMU For session mode, only XDG_CACHE_HOME is set, because we want to remain integrating with services in user session, but for system mode, this would have become reading/writing to '/' which carries the obvious issue with permissions (also, '/' is the wrong location in 99.9% cases anyway). Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-08 11:15:07 +00:00
XDG_DATA_HOME=/tmp/lib/domain--1-q35-test/.local/share \
XDG_CACHE_HOME=/tmp/lib/domain--1-q35-test/.cache \
XDG_CONFIG_HOME=/tmp/lib/domain--1-q35-test/.config \
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
QEMU_AUDIO_DRV=none \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
/usr/bin/qemu-system-x86_64 \
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
-name q35-test \
-S \
qemu: deprecate QEMU_CAPS_MACHINE_USB_OPT Implied by QEMU >= 1.3.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-machine q35,accel=tcg,usb=off,dump-guest-core=off \
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
-m 2048 \
qemu: Always assume QEMU_CAPS_REALTIME_MLOCK The '-realtime mlock' cmd line argument was introduced in QEMU commit v1.5.0-rc0~190 which matches minimal QEMU version we require. Therefore, the capability will always be present. Apparently, nearly none of our xml2argv test cases had the capability hence slightly bigger change under qemuxml2argvdata/. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-12 08:03:36 +00:00
-realtime mlock=off \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 11:29:16 +00:00
-smp 2,sockets=2,cores=1,threads=1 \
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
-uuid 11dbdcdd-4c3b-482b-8903-9bdb8c0a2774 \
qemu: deprecate QEMU_CAPS_DISPLAY Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-display none \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-user-config \
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
-nodefaults \
qemu: command: always use -chardev for monitor config AFAIK there aren't any cases where we will/should hit the old code path for our supported qemu versions, so drop the old code. Massive test suite churn follows Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2017-06-26 14:40:39 +00:00
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-q35-test/monitor.sock,\
server,nowait \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-28 22:04:58 +00:00
-mon chardev=charmonitor,id=monitor,mode=control \
qemu: deprecate QEMU_CAPS_RTC Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-rtc base=utc \
qemu: deprecate QEMU_CAPS_NO_SHUTDOWN Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-shutdown \
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
-no-acpi \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
-device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.1,addr=0x0 \
-device ioh3420,port=0x10,chassis=3,id=pci.3,bus=pcie.0,addr=0x2 \
-device x3130-upstream,id=pci.4,bus=pci.3,addr=0x0 \
-device xio3130-downstream,port=0x0,chassis=5,id=pci.5,bus=pci.4,addr=0x0 \
-device xio3130-downstream,port=0x1,chassis=6,id=pci.6,bus=pci.4,addr=0x1 \
-device xio3130-downstream,port=0x2,chassis=7,id=pci.7,bus=pci.4,addr=0x2 \
-device xio3130-downstream,port=0x3,chassis=8,id=pci.8,bus=pci.4,addr=0x3 \
-device xio3130-downstream,port=0x4,chassis=9,id=pci.9,bus=pci.4,addr=0x4 \
-device xio3130-downstream,port=0x5,chassis=10,id=pci.10,bus=pci.4,addr=0x5 \
-device xio3130-downstream,port=0x6,chassis=11,id=pci.11,bus=pci.4,addr=0x6 \
-device xio3130-downstream,port=0x7,chassis=12,id=pci.12,bus=pci.4,addr=0x7 \
-device xio3130-downstream,port=0x8,chassis=13,id=pci.13,bus=pci.4,addr=0x8 \
-device xio3130-downstream,port=0x9,chassis=14,id=pci.14,bus=pci.4,addr=0x9 \
-device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x1d.0x7 \
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pcie.0,multifunction=on,\
addr=0x1d \
-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,addr=0x1d.0x1 \
-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x1d.0x2 \
-device ich9-usb-ehci1,id=usb1,bus=pcie.0,addr=0x1a.0x7 \
test-wrap-argv: set cutoff at 78 characters For every but the last argument, we also need space for a space and a backslash. Rewrap everything longer than 78 characters.
2016-07-11 14:27:53 +00:00
-device ich9-usb-uhci1,masterbus=usb1.0,firstport=0,bus=pcie.0,\
multifunction=on,addr=0x1a \
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
-device ich9-usb-uhci1,masterbus=usb2.0,firstport=0,bus=pci.2,multifunction=on,\
addr=0x1 \
-device ich9-usb-uhci2,masterbus=usb2.0,firstport=2,bus=pci.2,addr=0x1.0x1 \
-device ich9-usb-uhci3,masterbus=usb2.0,firstport=4,bus=pci.2,addr=0x1.0x2 \
-device ich9-usb-ehci1,id=usb2,bus=pci.2,addr=0x1.0x7 \
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
-device nec-usb-xhci,id=usb3,bus=pci.5,addr=0x0 \
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
-device ich9-usb-uhci1,masterbus=usb4.0,firstport=0,bus=pci.2,multifunction=on,\
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
addr=0x2 \
-device ich9-usb-uhci2,masterbus=usb4.0,firstport=2,bus=pci.2,addr=0x2.0x1 \
-device ich9-usb-uhci3,masterbus=usb4.0,firstport=4,bus=pci.2,addr=0x2.0x2 \
-device ich9-usb-ehci1,id=usb4,bus=pci.2,addr=0x2.0x7 \
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-sata0-0-0 \
qemu: caps: Always assume presence of 'ide-hd' and 'ide-cd' devices The split of ide-disk into the two separate devices was introduced by qemu commit 1f56e32a7f4b3 released in qemu v0.15. Note that when compared to the previous commit which made sure that no disk related tests were touched, in this case it's not as careful. Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-01-28 13:44:57 +00:00
-device ide-hd,bus=ide.0,drive=drive-sata0-0-0,id=sata0-0-0,bootindex=1
Reference in New Issue Copy Permalink