libvirt/tests/networkxml2xmlin/isolated-network.xml

<network ipv6='no'>
  <name>private</name>
  <uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid>
  <bridge name="virbr2"/>
  <mac address='52:54:00:17:3F:37'/>
  <ip address="192.168.152.1" netmask="255.255.255.0">
    <dhcp>
      <range start="192.168.152.2" end="192.168.152.254"/>
    </dhcp>
  </ip>
</network>
network: allow guest to guest IPv6 without gateway definition This patch adds the capability for virtual guests to do IPv6 communication via a virtual network interface with no IPv6 (gateway) addresses specified. This capability has always been enabled by default for IPv4, but disabled for IPv6 for security concerns, and because it requires the ip6tables command to be operational (which isn't the case on a system with the ipv6 module completely disabled). This patch adds a new attribute "ipv6" at the toplevel of a <network> object. If ipv6='yes', the extra ip6tables rules required to permite inter-guest communications are added when the network is started. If it is 'no', or not present, those rules will not be added; thus the default behavior doesn't change, so there should be no compatibility issues with any existing installations. Note that virtual guests cannot communication with the virtualization host via this interface, because the following kernel tunable has been set: net.ipv6.conf.<bridge_interface_name>.disable_ipv6 = 1 This assures that the bridge interface will not have an IPv6 link-local (fe80::) address. To control this behavior so that it is not enabled by default, the parameter ipv6='yes' on the <network> statement has been added. Documentation related to this patch has been updated. The network schema has also been updated. 2012-12-03 16:13:36 +00:00			`<network ipv6='no'>`
tests: Add network XML to XML tests. 2009-10-09 12:47:43 +00:00			`<name>private</name>`
			`<uuid>81ff0d90-c91e-6742-64da-4a736edb9a9b</uuid>`
Remove the space before the slash in network XML This matches the style we use elsewhere and allows nat-network-dns-srv-record{,-minimal}.xml to be tested in network XML -> XML test. 2013-07-30 12:36:08 +00:00			`<bridge name="virbr2"/>`
Give each virtual network bridge its own fixed MAC address This fixes https://bugzilla.redhat.com/show_bug.cgi?id=609463 The problem was that, since a bridge always acquires the MAC address of the connected interface with the numerically lowest MAC, as guests are started and stopped, it was possible for the MAC address to change over time, and this change in the network was being detected by Windows 7 (it sees the MAC of the default route change), so on each reboot it would bring up a dialog box asking about this "new network". The solution is to create a dummy tap interface with a MAC guaranteed to be lower than any guest interface's MAC, and attach that tap to the bridge as soon as it's created. Since all guest MAC addresses start with 0xFE, we can just generate a MAC with the standard "0x52, 0x54, 0" prefix, and it's guaranteed to always win (physical interfaces are never connected to these bridges, so we don't need to worry about competing numerically with them). Note that the dummy tap is never set to IFF_UP state - that's not necessary in order for the bridge to take its MAC, and not setting it to UP eliminates the clutter of having an (eg) "virbr0-nic" displayed in the output of the ifconfig command. I chose to not auto-generate the MAC address in the network XML parser, as there are likely to be consumers of that API that don't need or want to have a MAC address associated with the bridge. Instead, in bridge_driver.c when the network is being defined, if there is no MAC, one is generated. To account for virtual network configs that already exist when upgrading from an older version of libvirt, I've added a %post script to the specfile that searches for all network definitions in both the config directory (/etc/libvirt/qemu/networks) and the state directory (/var/lib/libvirt/network) that are missing a mac address, generates a random address, and adds it to the config (and a matching address to the state file, if there is one). docs/formatnetwork.html.in: document <mac address.../> docs/schemas/network.rng: add nac address to schema libvirt.spec.in: %post script to update existing networks src/conf/network_conf.[ch]: parse and format <mac address.../> src/libvirt_private.syms: export a couple private symbols we need src/network/bridge_driver.c: auto-generate mac address when needed, create dummy interface if mac address is present. tests/networkxml2xmlin/isolated-network.xml tests/networkxml2xmlin/routed-network.xml tests/networkxml2xmlout/isolated-network.xml tests/networkxml2xmlout/routed-network.xml: add mac address to some tests 2011-02-09 08:28:12 +00:00			`<mac address='52:54:00:17:3F:37'/>`
tests: Add network XML to XML tests. 2009-10-09 12:47:43 +00:00			`<ip address="192.168.152.1" netmask="255.255.255.0">`
			`<dhcp>`
Remove the space before the slash in network XML This matches the style we use elsewhere and allows nat-network-dns-srv-record{,-minimal}.xml to be tested in network XML -> XML test. 2013-07-30 12:36:08 +00:00			`<range start="192.168.152.2" end="192.168.152.254"/>`
tests: Add network XML to XML tests. 2009-10-09 12:47:43 +00:00			`</dhcp>`
			`</ip>`
			`</network>`