libvirt/tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address-device.xml

<domain type='qemu'>
  <name>QEMUGuest1</name>
  <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
  <memory unit='KiB'>219100</memory>
  <currentMemory unit='KiB'>219100</currentMemory>
  <vcpu placement='static'>1</vcpu>
  <os>
    <type arch='i686' machine='pc'>hvm</type>
    <boot dev='hd'/>
  </os>
  <clock offset='utc'/>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <devices>
    <emulator>/usr/bin/qemu</emulator>
    <disk type='block' device='disk'>
      <source dev='/dev/HostVG/QEMUGuest1'/>
      <target dev='hda' bus='ide'/>
    </disk>
    <hostdev mode='subsystem' type='usb' managed='no'>
      <source>
        <address bus='14' device='6'/>
      </source>
    </hostdev>
    <memballoon model='virtio'/>
  </devices>
</domain>
Convert USB hostdevices over to -device The old syntax was -usbdevice host:PRODUCT:VENDOR Or -usbdevice host:BUS.DEV The new syntax is -device usb-host,product=PRODUCT,vendor=VENDOR Or -device usb-host,hostbus=BUS,hostaddr=DEV 2009-12-14 19:32:32 +00:00			`<domain type='qemu'>`
			`<name>QEMUGuest1</name>`
			`<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>`
xml: output memory unit for clarity Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/data tests/out -name '.xml' \| \ xargs sed -i 's/<\(memory\\|currentMemory\\|hard_limit\\|soft_limit\\|min_guarantee\\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/data tests/out -name '.xml' \| \ xargs sed -i 's/<\(capacity\\|allocation\\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/data/.xml: Update all tests. * tests/out/.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise. 2012-02-23 00:48:38 +00:00			`<memory unit='KiB'>219100</memory>`
			`<currentMemory unit='KiB'>219100</currentMemory>`
numad: Always output 'placement' of <vcpu> <vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs). 2012-05-08 16:04:36 +00:00			`<vcpu placement='static'>1</vcpu>`
Convert USB hostdevices over to -device The old syntax was -usbdevice host:PRODUCT:VENDOR Or -usbdevice host:BUS.DEV The new syntax is -device usb-host,product=PRODUCT,vendor=VENDOR Or -device usb-host,hostbus=BUS,hostaddr=DEV 2009-12-14 19:32:32 +00:00			`<os>`
			`<type arch='i686' machine='pc'>hvm</type>`
			`<boot dev='hd'/>`
			`</os>`
			`<clock offset='utc'/>`
			`<on_poweroff>destroy</on_poweroff>`
			`<on_reboot>restart</on_reboot>`
			`<on_crash>destroy</on_crash>`
			`<devices>`
			`<emulator>/usr/bin/qemu</emulator>`
			`<disk type='block' device='disk'>`
			`<source dev='/dev/HostVG/QEMUGuest1'/>`
			`<target dev='hda' bus='ide'/>`
			`</disk>`
			`<hostdev mode='subsystem' type='usb' managed='no'>`
			`<source>`
			`<address bus='14' device='6'/>`
			`</source>`
			`</hostdev>`
Explicitly represent balloon device in XML and handle PCI address To allow compatibility with older QEMU PCI device slot assignment it is necessary to explicitly track the balloon device in the XML. This introduces a new device <memballoon model='virtio\|xen'/> It can also have a PCI address, auto-assigned if necessary. The memballoon will be automatically added to all Xen and QEMU guests by default. * docs/schemas/domain.rng: Add <memballoon> element * src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and formatting for memballoon device. Always add a memory balloon device to Xen/QEMU if none exists in XML * src/libvirt_private.syms: Export memballoon model APIs * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the PCI device address in memory balloon device * tests/*: Update to test new functionality 2010-07-15 13:02:42 +00:00			`<memballoon model='virtio'/>`
Convert USB hostdevices over to -device The old syntax was -usbdevice host:PRODUCT:VENDOR Or -usbdevice host:BUS.DEV The new syntax is -device usb-host,product=PRODUCT,vendor=VENDOR Or -device usb-host,hostbus=BUS,hostaddr=DEV 2009-12-14 19:32:32 +00:00			`</devices>`
			`</domain>`