libvirt/tests/qemuxmlconfdata/q35.xml

33 lines
1014 B
XML
Raw Normal View History

qemu: add dmi-to-pci-bridge controller This PCI controller, named "dmi-to-pci-bridge" in the libvirt config, and implemented with qemu's "i82801b11-bridge" device, connects to a PCI Express slot (e.g. one of the slots provided by the pcie-root controller, aka "pcie.0" on the qemu commandline), and provides 31 *non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31. Any time a machine is defined which has a pcie-root controller (i.e. any q35-based machinetype), libvirt will automatically add a dmi-to-pci-bridge controller if one doesn't exist, and also add a pci-bridge controller. The reasoning here is that any useful domain will have either an immediate (startup time) or eventual (subsequent hot-plug) need for a standard PCI slot; since the pcie-root controller only provides PCIe slots, we need to connect a dmi-to-pci-bridge controller to it in order to get a non-hot-plug PCI slot that we can then use to connect a pci-bridge - the slots provided by the pci-bridge will be both standard PCI and hot-pluggable. Since pci-bridge devices themselves can not be hot-plugged into a running system (although you can hot-plug other devices into a pci-bridge's slots), any new pci-bridge controller that is added can (and will) be plugged into the dmi-to-pci-bridge as long as it has empty slots available. This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST" to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit the automatically added dmi-to-pci-bridge and pci-bridge devices, and the "after" xml can include it - this way we are testing if libvirt is properly adding these devices.
2013-07-31 01:37:32 +00:00
<domain type='qemu'>
<name>q35-test</name>
<uuid>11dbdcdd-4c3b-482b-8903-9bdb8c0a2774</uuid>
<memory unit='KiB'>2097152</memory>
<currentMemory unit='KiB'>2097152</currentMemory>
<vcpu placement='static' cpuset='0-1'>2</vcpu>
<os>
<type arch='x86_64' machine='q35'>hvm</type>
<boot dev='hd'/>
</os>
<pm>
<suspend-to-mem enabled='no'/>
<suspend-to-disk enabled='yes'/>
</pm>
qemu: add dmi-to-pci-bridge controller This PCI controller, named "dmi-to-pci-bridge" in the libvirt config, and implemented with qemu's "i82801b11-bridge" device, connects to a PCI Express slot (e.g. one of the slots provided by the pcie-root controller, aka "pcie.0" on the qemu commandline), and provides 31 *non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31. Any time a machine is defined which has a pcie-root controller (i.e. any q35-based machinetype), libvirt will automatically add a dmi-to-pci-bridge controller if one doesn't exist, and also add a pci-bridge controller. The reasoning here is that any useful domain will have either an immediate (startup time) or eventual (subsequent hot-plug) need for a standard PCI slot; since the pcie-root controller only provides PCIe slots, we need to connect a dmi-to-pci-bridge controller to it in order to get a non-hot-plug PCI slot that we can then use to connect a pci-bridge - the slots provided by the pci-bridge will be both standard PCI and hot-pluggable. Since pci-bridge devices themselves can not be hot-plugged into a running system (although you can hot-plug other devices into a pci-bridge's slots), any new pci-bridge controller that is added can (and will) be plugged into the dmi-to-pci-bridge as long as it has empty slots available. This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST" to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit the automatically added dmi-to-pci-bridge and pci-bridge devices, and the "after" xml can include it - this way we are testing if libvirt is properly adding these devices.
2013-07-31 01:37:32 +00:00
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<disk type='block' device='disk'>
<source dev='/dev/HostVG/QEMUGuest1'/>
<target dev='sda' bus='sata'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
qemu: add dmi-to-pci-bridge controller This PCI controller, named "dmi-to-pci-bridge" in the libvirt config, and implemented with qemu's "i82801b11-bridge" device, connects to a PCI Express slot (e.g. one of the slots provided by the pcie-root controller, aka "pcie.0" on the qemu commandline), and provides 31 *non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31. Any time a machine is defined which has a pcie-root controller (i.e. any q35-based machinetype), libvirt will automatically add a dmi-to-pci-bridge controller if one doesn't exist, and also add a pci-bridge controller. The reasoning here is that any useful domain will have either an immediate (startup time) or eventual (subsequent hot-plug) need for a standard PCI slot; since the pcie-root controller only provides PCIe slots, we need to connect a dmi-to-pci-bridge controller to it in order to get a non-hot-plug PCI slot that we can then use to connect a pci-bridge - the slots provided by the pci-bridge will be both standard PCI and hot-pluggable. Since pci-bridge devices themselves can not be hot-plugged into a running system (although you can hot-plug other devices into a pci-bridge's slots), any new pci-bridge controller that is added can (and will) be plugged into the dmi-to-pci-bridge as long as it has empty slots available. This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST" to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit the automatically added dmi-to-pci-bridge and pci-bridge devices, and the "after" xml can include it - this way we are testing if libvirt is properly adding these devices.
2013-07-31 01:37:32 +00:00
<controller type='pci' index='0' model='pcie-root'/>
<video>
<model type='qxl' ram='65536' vram='32768' vgamem='8192' heads='1'/>
qemu: add dmi-to-pci-bridge controller This PCI controller, named "dmi-to-pci-bridge" in the libvirt config, and implemented with qemu's "i82801b11-bridge" device, connects to a PCI Express slot (e.g. one of the slots provided by the pcie-root controller, aka "pcie.0" on the qemu commandline), and provides 31 *non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31. Any time a machine is defined which has a pcie-root controller (i.e. any q35-based machinetype), libvirt will automatically add a dmi-to-pci-bridge controller if one doesn't exist, and also add a pci-bridge controller. The reasoning here is that any useful domain will have either an immediate (startup time) or eventual (subsequent hot-plug) need for a standard PCI slot; since the pcie-root controller only provides PCIe slots, we need to connect a dmi-to-pci-bridge controller to it in order to get a non-hot-plug PCI slot that we can then use to connect a pci-bridge - the slots provided by the pci-bridge will be both standard PCI and hot-pluggable. Since pci-bridge devices themselves can not be hot-plugged into a running system (although you can hot-plug other devices into a pci-bridge's slots), any new pci-bridge controller that is added can (and will) be plugged into the dmi-to-pci-bridge as long as it has empty slots available. This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST" to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit the automatically added dmi-to-pci-bridge and pci-bridge devices, and the "after" xml can include it - this way we are testing if libvirt is properly adding these devices.
2013-07-31 01:37:32 +00:00
</video>
<memballoon model='none'/>
</devices>
</domain>