libvirt/tests/qemuxml2argvtest.c

2240 lines
88 KiB
C
Raw Normal View History

#include <config.h>
2007-07-18 21:34:22 +00:00
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
2007-07-18 21:34:22 +00:00
#include <string.h>
#include <sys/types.h>
#include <fcntl.h>
#include "testutils.h"
#ifdef WITH_QEMU
# include "internal.h"
2012-12-12 18:06:53 +00:00
# include "viralloc.h"
# include "qemu/qemu_alias.h"
# include "qemu/qemu_capabilities.h"
# include "qemu/qemu_command.h"
# include "qemu/qemu_domain.h"
# include "qemu/qemu_migration.h"
# include "qemu/qemu_process.h"
# include "datatypes.h"
# include "conf/storage_conf.h"
# include "cpu/cpu_map.h"
# include "virstring.h"
# include "storage/storage_driver.h"
# include "virmock.h"
2007-07-18 21:34:22 +00:00
# define __QEMU_CAPSRIV_H_ALLOW__
# include "qemu/qemu_capspriv.h"
# undef __QEMU_CAPSRIV_H_ALLOW__
# include "testutilsqemu.h"
# define VIR_FROM_THIS VIR_FROM_QEMU
static const char *abs_top_srcdir;
static virQEMUDriver driver;
2007-07-18 21:34:22 +00:00
static unsigned char *
fakeSecretGetValue(virSecretPtr obj ATTRIBUTE_UNUSED,
size_t *value_size,
unsigned int fakeflags ATTRIBUTE_UNUSED,
unsigned int internalFlags ATTRIBUTE_UNUSED)
{
char *secret;
if (VIR_STRDUP(secret, "AQCVn5hO6HzFAhAAq0NCv8jtJcIcE+HOBlMQ1A") < 0)
return NULL;
*value_size = strlen(secret);
return (unsigned char *) secret;
}
static virSecretPtr
fakeSecretLookupByUsage(virConnectPtr conn,
int usageType,
const char *usageID)
{
unsigned char uuid[VIR_UUID_BUFLEN];
if (usageType == VIR_SECRET_USAGE_TYPE_VOLUME) {
if (!STRPREFIX(usageID, "/storage/guest_disks/")) {
virReportError(VIR_ERR_INTERNAL_ERROR,
"test provided invalid volume storage prefix '%s'",
usageID);
return NULL;
}
} else if (STRNEQ(usageID, "mycluster_myname")) {
virReportError(VIR_ERR_INTERNAL_ERROR,
"test provided incorrect usage '%s'", usageID);
return NULL;
}
if (virUUIDGenerate(uuid) < 0)
return NULL;
return virGetSecret(conn, uuid, usageType, usageID);
}
static virSecretPtr
fakeSecretLookupByUUID(virConnectPtr conn,
const unsigned char *uuid)
{
return virGetSecret(conn, uuid, 0, "");
}
static virSecretDriver fakeSecretDriver = {
.connectNumOfSecrets = NULL,
.connectListSecrets = NULL,
.secretLookupByUUID = fakeSecretLookupByUUID,
.secretLookupByUsage = fakeSecretLookupByUsage,
.secretDefineXML = NULL,
.secretGetXMLDesc = NULL,
.secretSetValue = NULL,
.secretGetValue = fakeSecretGetValue,
.secretUndefine = NULL,
};
# define STORAGE_POOL_XML_PATH "storagepoolxml2xmlout/"
static const unsigned char fakeUUID[VIR_UUID_BUFLEN] = "fakeuuid";
static virStoragePoolPtr
fakeStoragePoolLookupByName(virConnectPtr conn,
const char *name)
{
char *xmlpath = NULL;
virStoragePoolPtr ret = NULL;
if (STRNEQ(name, "inactive")) {
if (virAsprintf(&xmlpath, "%s/%s%s.xml",
abs_srcdir,
STORAGE_POOL_XML_PATH,
name) < 0)
return NULL;
if (!virFileExists(xmlpath)) {
virReportError(VIR_ERR_NO_STORAGE_POOL,
"File '%s' not found", xmlpath);
goto cleanup;
}
}
ret = virGetStoragePool(conn, name, fakeUUID, NULL, NULL);
cleanup:
VIR_FREE(xmlpath);
return ret;
}
static virStorageVolPtr
fakeStorageVolLookupByName(virStoragePoolPtr pool,
const char *name)
{
char **volinfo = NULL;
virStorageVolPtr ret = NULL;
if (STREQ(pool->name, "inactive")) {
virReportError(VIR_ERR_OPERATION_INVALID,
"storage pool '%s' is not active", pool->name);
return NULL;
}
if (STREQ(name, "nonexistent")) {
virReportError(VIR_ERR_NO_STORAGE_VOL,
"no storage vol with matching name '%s'", name);
return NULL;
}
if (!strchr(name, '+'))
goto fallback;
if (!(volinfo = virStringSplit(name, "+", 2)))
return NULL;
if (!volinfo[1])
goto fallback;
ret = virGetStorageVol(pool->conn, pool->name, volinfo[1], volinfo[0],
NULL, NULL);
cleanup:
virStringFreeList(volinfo);
return ret;
fallback:
ret = virGetStorageVol(pool->conn, pool->name, name, "block", NULL, NULL);
goto cleanup;
}
static int
fakeStorageVolGetInfo(virStorageVolPtr vol,
virStorageVolInfoPtr info)
{
memset(info, 0, sizeof(*info));
info->type = virStorageVolTypeFromString(vol->key);
if (info->type < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
"Invalid volume type '%s'", vol->key);
return -1;
}
return 0;
}
static char *
fakeStorageVolGetPath(virStorageVolPtr vol)
{
char *ret = NULL;
ignore_value(virAsprintf(&ret, "/some/%s/device/%s", vol->key, vol->name));
return ret;
}
static char *
fakeStoragePoolGetXMLDesc(virStoragePoolPtr pool,
unsigned int flags_unused ATTRIBUTE_UNUSED)
{
char *xmlpath = NULL;
char *xmlbuf = NULL;
if (STREQ(pool->name, "inactive")) {
virReportError(VIR_ERR_NO_STORAGE_POOL, NULL);
return NULL;
}
if (virAsprintf(&xmlpath, "%s/%s%s.xml",
abs_srcdir,
STORAGE_POOL_XML_PATH,
pool->name) < 0)
return NULL;
if (virTestLoadFile(xmlpath, &xmlbuf) < 0) {
virReportError(VIR_ERR_INTERNAL_ERROR,
"failed to load XML file '%s'",
xmlpath);
goto cleanup;
}
cleanup:
VIR_FREE(xmlpath);
return xmlbuf;
}
static int
fakeStoragePoolIsActive(virStoragePoolPtr pool)
{
if (STREQ(pool->name, "inactive"))
return 0;
return 1;
}
/* Test storage pool implementation
*
* These functions aid testing of storage pool related stuff when creating a
* qemu command line.
*
* There are a few "magic" values to pass to these functions:
*
* 1) "inactive" as a pool name to create an inactive pool. All other names are
* interpreted as file names in storagepoolxml2xmlout/ and are used as the
* definition for the pool. If the file doesn't exist the pool doesn't exist.
*
* 2) "nonexistent" returns an error while looking up a volume. Otherwise
* pattern VOLUME_TYPE+VOLUME_PATH can be used to simulate a volume in a pool.
* This creates a fake path for this volume. If the '+' sign is omitted, block
* type is assumed.
*/
static virStorageDriver fakeStorageDriver = {
.storagePoolLookupByName = fakeStoragePoolLookupByName,
.storageVolLookupByName = fakeStorageVolLookupByName,
.storagePoolGetXMLDesc = fakeStoragePoolGetXMLDesc,
.storageVolGetPath = fakeStorageVolGetPath,
.storageVolGetInfo = fakeStorageVolGetInfo,
.storagePoolIsActive = fakeStoragePoolIsActive,
};
typedef enum {
FLAG_EXPECT_FAILURE = 1 << 0,
FLAG_EXPECT_PARSE_ERROR = 1 << 1,
FLAG_JSON = 1 << 2,
FLAG_FIPS = 1 << 3,
} virQemuXML2ArgvTestFlags;
struct testInfo {
const char *name;
virQEMUCapsPtr qemuCaps;
const char *migrateFrom;
int migrateFd;
unsigned int flags;
unsigned int parseFlags;
bool skipLegacyCPUs;
};
static int
testAddCPUModels(virQEMUCapsPtr caps, bool skipLegacy)
{
virArch arch = virQEMUCapsGetArch(caps);
const char *x86Models[] = {
"Opteron_G3", "Opteron_G2", "Opteron_G1",
"Nehalem", "Penryn", "Conroe",
"Haswell-noTSX", "Haswell",
};
const char *x86LegacyModels[] = {
"n270", "athlon", "pentium3", "pentium2", "pentium",
"486", "coreduo", "kvm32", "qemu32", "kvm64",
"core2duo", "phenom", "qemu64",
};
const char *armModels[] = {
"cortex-a9", "cortex-a8", "cortex-a57", "cortex-a53",
};
const char *ppc64Models[] = {
"POWER8", "POWER7",
};
if (ARCH_IS_X86(arch)) {
if (virQEMUCapsAddCPUDefinitions(caps, x86Models,
ARRAY_CARDINALITY(x86Models)) < 0)
return -1;
if (!skipLegacy &&
virQEMUCapsAddCPUDefinitions(caps, x86LegacyModels,
ARRAY_CARDINALITY(x86LegacyModels)) < 0)
return -1;
} else if (ARCH_IS_ARM(arch)) {
if (virQEMUCapsAddCPUDefinitions(caps, armModels,
ARRAY_CARDINALITY(armModels)) < 0)
return -1;
} else if (ARCH_IS_PPC64(arch)) {
if (virQEMUCapsAddCPUDefinitions(caps, ppc64Models,
ARRAY_CARDINALITY(ppc64Models)) < 0)
return -1;
}
return 0;
}
static int
testInitQEMUCaps(struct testInfo *info,
int gic)
{
int ret = -1;
if (!(info->qemuCaps = virQEMUCapsNew()))
goto cleanup;
virQEMUCapsSet(info->qemuCaps, QEMU_CAPS_NO_ACPI);
if (testQemuCapsSetGIC(info->qemuCaps, gic) < 0)
goto cleanup;
ret = 0;
cleanup:
return ret;
}
static int
testUpdateQEMUCaps(const struct testInfo *info,
virDomainObjPtr vm,
virCapsPtr caps)
{
int ret = -1;
virQEMUCapsSetArch(info->qemuCaps, vm->def->os.arch);
if (testAddCPUModels(info->qemuCaps, info->skipLegacyCPUs) < 0)
goto cleanup;
virQEMUCapsInitHostCPUModel(info->qemuCaps, caps);
virQEMUCapsFilterByMachineType(info->qemuCaps, vm->def->os.machine);
if (ARCH_IS_X86(vm->def->os.arch))
virQEMUCapsSet(info->qemuCaps, QEMU_CAPS_PCI_MULTIBUS);
ret = 0;
cleanup:
return ret;
}
static int
testCompareXMLToArgv(const void *data)
{
const struct testInfo *info = data;
char *xml = NULL;
char *args = NULL;
char *migrateURI = NULL;
2007-07-18 21:34:22 +00:00
char *actualargv = NULL;
unsigned int flags = info->flags;
unsigned int parseFlags = info->parseFlags;
int ret = -1;
virDomainObjPtr vm = NULL;
virDomainChrSourceDef monitor_chr;
virConnectPtr conn;
2010-10-22 16:50:34 +00:00
char *log = NULL;
virCommandPtr cmd = NULL;
size_t i;
qemuDomainObjPrivatePtr priv = NULL;
memset(&monitor_chr, 0, sizeof(monitor_chr));
if (!(conn = virGetConnect()))
goto cleanup;
conn->secretDriver = &fakeSecretDriver;
conn->storageDriver = &fakeStorageDriver;
2007-07-18 21:34:22 +00:00
if (virQEMUCapsGet(info->qemuCaps, QEMU_CAPS_MONITOR_JSON))
flags |= FLAG_JSON;
if (virQEMUCapsGet(info->qemuCaps, QEMU_CAPS_ENABLE_FIPS))
flags |= FLAG_FIPS;
if (qemuTestCapsCacheInsert(driver.qemuCapsCache, info->name,
info->qemuCaps) < 0)
goto cleanup;
if (virAsprintf(&xml, "%s/qemuxml2argvdata/qemuxml2argv-%s.xml",
abs_srcdir, info->name) < 0 ||
virAsprintf(&args, "%s/qemuxml2argvdata/qemuxml2argv-%s.args",
abs_srcdir, info->name) < 0)
goto cleanup;
if (info->migrateFrom &&
!(migrateURI = qemuMigrationIncomingURI(info->migrateFrom,
info->migrateFd)))
goto cleanup;
if (!(vm = virDomainObjNew(driver.xmlopt)))
goto cleanup;
parseFlags |= VIR_DOMAIN_DEF_PARSE_INACTIVE;
if (!(vm->def = virDomainDefParseFile(xml, driver.caps, driver.xmlopt,
NULL, parseFlags))) {
if (flags & FLAG_EXPECT_PARSE_ERROR)
goto ok;
goto cleanup;
}
priv = vm->privateData;
2007-07-18 21:34:22 +00:00
if (virBitmapParse("0-3", &priv->autoNodeset, 4) < 0)
goto cleanup;
if (!virDomainDefCheckABIStability(vm->def, vm->def)) {
VIR_TEST_DEBUG("ABI stability check failed on %s", xml);
goto cleanup;
}
vm->def->id = -1;
if (qemuProcessPrepareMonitorChr(&monitor_chr, priv->libDir) < 0)
goto cleanup;
if (STREQ(vm->def->os.machine, "pc") &&
STREQ(vm->def->emulator, "/usr/bin/qemu-system-x86_64")) {
VIR_FREE(vm->def->os.machine);
if (VIR_STRDUP(vm->def->os.machine, "pc-0.11") < 0)
goto cleanup;
}
if (testUpdateQEMUCaps(info, vm, driver.caps) < 0)
goto cleanup;
log = virTestLogContentAndReset();
VIR_FREE(log);
virResetLastError();
2010-10-22 16:50:34 +00:00
for (i = 0; i < vm->def->nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = vm->def->hostdevs[i];
if (hostdev->mode == VIR_DOMAIN_HOSTDEV_MODE_SUBSYS &&
hostdev->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI &&
hostdev->source.subsys.u.pci.backend == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT) {
hostdev->source.subsys.u.pci.backend = VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM;
}
}
if (!(cmd = qemuProcessCreatePretendCmd(conn, &driver, vm, migrateURI,
(flags & FLAG_FIPS), false,
VIR_QEMU_PROCESS_START_COLD))) {
if (flags & FLAG_EXPECT_FAILURE)
goto ok;
goto cleanup;
2010-10-22 16:50:34 +00:00
}
if (!(actualargv = virCommandToString(cmd)))
goto cleanup;
if (virTestCompareToFile(actualargv, args) < 0)
goto cleanup;
2007-07-18 21:34:22 +00:00
ret = 0;
ok:
if (ret == 0 && flags & FLAG_EXPECT_FAILURE) {
ret = -1;
VIR_TEST_DEBUG("Error expected but there wasn't any.\n");
goto cleanup;
}
if (!virTestOOMActive()) {
if (flags & FLAG_EXPECT_FAILURE) {
if ((log = virTestLogContentAndReset()))
VIR_TEST_DEBUG("Got expected error: \n%s", log);
}
virResetLastError();
ret = 0;
}
cleanup:
VIR_FREE(log);
VIR_FREE(actualargv);
virDomainChrSourceDefClear(&monitor_chr);
virCommandFree(cmd);
virObjectUnref(vm);
virObjectUnref(conn);
VIR_FREE(migrateURI);
VIR_FREE(xml);
VIR_FREE(args);
return ret;
2007-07-18 21:34:22 +00:00
}
static int
tests: simplify common setup A few of the tests were missing basic sanity checks, while most of them were doing copy-and-paste initialization (in fact, some of them pasted the argc > 1 check more than once!). It's much nicer to do things in one common place, and minimizes the size of the next patch that fixes getcwd usage. * tests/testutils.h (EXIT_AM_HARDFAIL): New define. (progname, abs_srcdir): Define for all tests. (VIRT_TEST_MAIN): Change callback signature. * tests/testutils.c (virtTestMain): Do more common init. * tests/commandtest.c (mymain): Simplify. * tests/cputest.c (mymain): Likewise. * tests/esxutilstest.c (mymain): Likewise. * tests/eventtest.c (mymain): Likewise. * tests/hashtest.c (mymain): Likewise. * tests/networkxml2xmltest.c (mymain): Likewise. * tests/nodedevxml2xmltest.c (myname): Likewise. * tests/nodeinfotest.c (mymain): Likewise. * tests/nwfilterxml2xmltest.c (mymain): Likewise. * tests/qemuargv2xmltest.c (mymain): Likewise. * tests/qemuhelptest.c (mymain): Likewise. * tests/qemuxml2argvtest.c (mymain): Likewise. * tests/qemuxml2xmltest.c (mymain): Likewise. * tests/qparamtest.c (mymain): Likewise. * tests/sexpr2xmltest.c (mymain): Likewise. * tests/sockettest.c (mymain): Likewise. * tests/statstest.c (mymain): Likewise. * tests/storagepoolxml2xmltest.c (mymain): Likewise. * tests/storagevolxml2xmltest.c (mymain): Likewise. * tests/virbuftest.c (mymain): Likewise. * tests/virshtest.c (mymain): Likewise. * tests/vmx2xmltest.c (mymain): Likewise. * tests/xencapstest.c (mymain): Likewise. * tests/xmconfigtest.c (mymain): Likewise. * tests/xml2sexprtest.c (mymain): Likewise. * tests/xml2vmxtest.c (mymain): Likewise.
2011-04-29 16:21:20 +00:00
mymain(void)
2007-07-18 21:34:22 +00:00
{
int ret = 0;
bool skipLegacyCPUs = false;
2007-07-18 21:34:22 +00:00
abs_top_srcdir = getenv("abs_top_srcdir");
if (!abs_top_srcdir)
tests: guarantee abs_srcdir in all C tests While trying to debug a failure of virpcitest during 'make distcheck', I noticed that with a VPATH build, 'cd tests; ./virpcitest' fails for an entirely different reason. To reproduce the distcheck failure, I had to run 'cd tests; abs_srcdir=/path/to/src ./virpcitest'. But we document in HACKING that all of our tests are supposed to be runnable without requiring extra environment variables. The solution: hardcode the location of srcdir into the just-built binaries, rather than requiring make to prepopulate environment variables. With this, './virpcitest' passes even in a VPATH build (provided that $(srcdir) is writable; a followup patch will fix the conditions required by 'make distcheck'). [Note: the makefile must still pass on directory variables to the test environment of shell scripts, since those aren't compiled. So while this solves the case of a compiled test, it still requires environment variables to pass a VPATH build of any shell script test case that relies on srcdir.] * tests/Makefile.am (AM_CFLAGS): Define abs_srcdir in all compiled tests. * tests/testutils.h (abs_srcdir): Quit declaring. * tests/testutils.c (virtTestMain): Rely on define rather than environment variable. * tests/virpcimock.c (pci_device_new_from_stub): Rely on define. * tests/cputest.c (mymain): Adjust abs_top_srcdir default. * tests/qemuxml2argvtest.c (mymain): Likewise. * tests/qemuxmlnstest.c (mymain): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-27 21:31:53 +00:00
abs_top_srcdir = abs_srcdir "/..";
/* Set the timezone because we are mocking the time() function.
* If we don't do that, then localtime() may return unpredictable
* results. In order to detect things that just work by a blind
* chance, we need to set an virtual timezone that no libvirt
* developer resides in. */
if (setenv("TZ", "VIR00:30", 1) < 0) {
perror("setenv");
return EXIT_FAILURE;
}
if (qemuTestDriverInit(&driver) < 0)
return EXIT_FAILURE;
driver.privileged = true;
VIR_FREE(driver.config->defaultTLSx509certdir);
if (VIR_STRDUP_QUIET(driver.config->defaultTLSx509certdir, "/etc/pki/qemu") < 0)
return EXIT_FAILURE;
VIR_FREE(driver.config->vncTLSx509certdir);
if (VIR_STRDUP_QUIET(driver.config->vncTLSx509certdir, "/etc/pki/libvirt-vnc") < 0)
return EXIT_FAILURE;
VIR_FREE(driver.config->spiceTLSx509certdir);
if (VIR_STRDUP_QUIET(driver.config->spiceTLSx509certdir, "/etc/pki/libvirt-spice") < 0)
return EXIT_FAILURE;
VIR_FREE(driver.config->chardevTLSx509certdir);
if (VIR_STRDUP_QUIET(driver.config->chardevTLSx509certdir, "/etc/pki/libvirt-chardev") < 0)
return EXIT_FAILURE;
VIR_FREE(driver.config->stateDir);
if (VIR_STRDUP_QUIET(driver.config->stateDir, "/nowhere") < 0)
return EXIT_FAILURE;
VIR_FREE(driver.config->hugetlbfs);
if (VIR_ALLOC_N(driver.config->hugetlbfs, 2) < 0)
return EXIT_FAILURE;
driver.config->nhugetlbfs = 2;
if (VIR_STRDUP(driver.config->hugetlbfs[0].mnt_dir, "/dev/hugepages2M") < 0 ||
VIR_STRDUP(driver.config->hugetlbfs[1].mnt_dir, "/dev/hugepages1G") < 0)
return EXIT_FAILURE;
driver.config->hugetlbfs[0].size = 2048;
driver.config->hugetlbfs[0].deflt = true;
driver.config->hugetlbfs[1].size = 1048576;
driver.config->spiceTLS = 1;
if (VIR_STRDUP_QUIET(driver.config->spicePassword, "123456") < 0)
return EXIT_FAILURE;
# define DO_TEST_FULL(name, migrateFrom, migrateFd, flags, \
parseFlags, gic, ...) \
do { \
static struct testInfo info = { \
name, NULL, migrateFrom, migrateFd, (flags), parseFlags, \
false \
}; \
info.skipLegacyCPUs = skipLegacyCPUs; \
if (testInitQEMUCaps(&info, gic) < 0) \
return EXIT_FAILURE; \
virQEMUCapsSetList(info.qemuCaps, __VA_ARGS__, QEMU_CAPS_LAST); \
if (virTestRun("QEMU XML-2-ARGV " name, \
testCompareXMLToArgv, &info) < 0) \
ret = -1; \
virObjectUnref(info.qemuCaps); \
} while (0)
# define DO_TEST(name, ...) \
DO_TEST_FULL(name, NULL, -1, 0, 0, GIC_NONE, __VA_ARGS__)
# define DO_TEST_GIC(name, gic, ...) \
DO_TEST_FULL(name, NULL, -1, 0, 0, gic, __VA_ARGS__)
# define DO_TEST_FAILURE(name, ...) \
DO_TEST_FULL(name, NULL, -1, FLAG_EXPECT_FAILURE, \
0, GIC_NONE, __VA_ARGS__)
# define DO_TEST_PARSE_ERROR(name, ...) \
DO_TEST_FULL(name, NULL, -1, \
FLAG_EXPECT_PARSE_ERROR | FLAG_EXPECT_FAILURE, \
0, GIC_NONE, __VA_ARGS__)
# define DO_TEST_PARSE_FLAGS_ERROR(name, parseFlags, ...) \
DO_TEST_FULL(name, NULL, -1, \
FLAG_EXPECT_PARSE_ERROR | FLAG_EXPECT_FAILURE, \
parseFlags, GIC_NONE, __VA_ARGS__)
# define DO_TEST_LINUX(name, ...) \
DO_TEST_LINUX_FULL(name, NULL, -1, 0, 0, GIC_NONE, __VA_ARGS__)
# ifdef __linux__
/* This is a macro that invokes test only on Linux. It's
* meant to be called in those cases where qemuxml2argvmock
* cooperation is expected (e.g. we need a fixed time,
* predictable NUMA topology and so on). On non-Linux
* platforms the macro just consume its argument. */
# define DO_TEST_LINUX_FULL(name, ...) \
DO_TEST_FULL(name, __VA_ARGS__)
# else /* __linux__ */
# define DO_TEST_LINUX_FULL(name, ...) \
do { \
const char *tmp ATTRIBUTE_UNUSED = name; \
} while (0)
# endif /* __linux__ */
# define NONE QEMU_CAPS_LAST
/* Unset or set all envvars here that are copied in qemudBuildCommandLine
* using ADD_ENV_COPY, otherwise these tests may fail due to unexpected
* values for these envvars */
2008-10-10 16:52:20 +00:00
setenv("PATH", "/bin", 1);
setenv("USER", "test", 1);
setenv("LOGNAME", "test", 1);
setenv("HOME", "/home/test", 1);
unsetenv("TMPDIR");
unsetenv("LD_PRELOAD");
unsetenv("LD_LIBRARY_PATH");
unsetenv("QEMU_AUDIO_DRV");
unsetenv("SDL_AUDIODRIVER");
2008-10-10 16:52:20 +00:00
DO_TEST("minimal", NONE);
DO_TEST_PARSE_ERROR("minimal-no-memory", NONE);
DO_TEST("minimal-msg-timestamp", QEMU_CAPS_MSG_TIMESTAMP);
DO_TEST("machine-aliases1", NONE);
DO_TEST("machine-aliases2", QEMU_CAPS_KVM);
DO_TEST("machine-core-on", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_DUMP_GUEST_CORE);
driver.config->dumpGuestCore = true;
DO_TEST("machine-core-off", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_DUMP_GUEST_CORE);
driver.config->dumpGuestCore = false;
DO_TEST("machine-core-cfg-off", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_DUMP_GUEST_CORE);
2012-08-15 08:16:36 +00:00
DO_TEST_FAILURE("machine-core-on", NONE);
DO_TEST_FAILURE("machine-core-on", QEMU_CAPS_MACHINE_OPT);
DO_TEST("machine-smm-opt",
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACHINE_SMM_OPT,
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST("machine-usb-opt", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACHINE_USB_OPT);
DO_TEST("machine-vmport-opt", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACHINE_VMPORT_OPT);
DO_TEST("kvm", QEMU_CAPS_MACHINE_OPT);
DO_TEST("default-kvm-host-arch", QEMU_CAPS_MACHINE_OPT);
DO_TEST("default-qemu-host-arch", QEMU_CAPS_MACHINE_OPT);
DO_TEST("boot-cdrom", NONE);
DO_TEST("boot-network", NONE);
DO_TEST("boot-floppy", NONE);
DO_TEST("boot-floppy-q35",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI);
DO_TEST("bootindex-floppy-q35",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI, QEMU_CAPS_BOOT_MENU,
QEMU_CAPS_BOOTINDEX);
DO_TEST("boot-multi", QEMU_CAPS_BOOT_MENU);
DO_TEST("boot-menu-enable",
QEMU_CAPS_BOOT_MENU);
DO_TEST("boot-menu-enable-bootindex",
QEMU_CAPS_BOOT_MENU,
QEMU_CAPS_BOOTINDEX);
DO_TEST("boot-menu-enable-with-timeout",
QEMU_CAPS_BOOT_MENU,
QEMU_CAPS_SPLASH_TIMEOUT);
DO_TEST_FAILURE("boot-menu-enable-with-timeout", QEMU_CAPS_BOOT_MENU);
DO_TEST_PARSE_ERROR("boot-menu-enable-with-timeout-invalid", NONE);
DO_TEST("boot-menu-disable", QEMU_CAPS_BOOT_MENU);
DO_TEST("boot-menu-disable-drive",
QEMU_CAPS_BOOT_MENU);
DO_TEST("boot-menu-disable-drive-bootindex",
QEMU_CAPS_BOOT_MENU,
QEMU_CAPS_BOOTINDEX);
DO_TEST_PARSE_ERROR("boot-dev+order",
QEMU_CAPS_BOOTINDEX,
QEMU_CAPS_VIRTIO_BLK_SCSI);
DO_TEST("boot-order",
QEMU_CAPS_BOOTINDEX,
QEMU_CAPS_VIRTIO_BLK_SCSI);
DO_TEST("boot-complex",
QEMU_CAPS_DRIVE_BOOT,
QEMU_CAPS_VIRTIO_BLK_SCSI);
DO_TEST("boot-complex-bootindex",
QEMU_CAPS_DRIVE_BOOT,
qemu: add new disk device='lun' for bus='virtio' & type='block' In the past, generic SCSI commands issued from a guest to a virtio disk were always passed through to the underlying disk by qemu, and the kernel would also pass them on. As a result of CVE-2011-4127 (see: http://seclists.org/oss-sec/2011/q4/536), qemu now honors its scsi=on|off device option for virtio-blk-pci (which enables/disables passthrough of generic SCSI commands), and the kernel will only allow the commands for physical devices (not for partitions or logical volumes). The default behavior of qemu is still to allow sending generic SCSI commands to physical disks that are presented to a guest as virtio-blk-pci devices, but libvirt prefers to disable those commands in the standard virtio block devices, enabling it only when specifically requested (hopefully indicating that the requester understands what they're asking for). For this purpose, a new libvirt disk device type (device='lun') has been created. device='lun' is identical to the default device='disk', except that: 1) It is only allowed if bus='virtio', type='block', and the qemu version is "new enough" to support it ("new enough" == qemu 0.11 or better), otherwise the domain will fail to start and a CONFIG_UNSUPPORTED error will be logged). 2) The option "scsi=on" will be added to the -device arg to allow SG_IO commands (if device !='lun', "scsi=off" will be added to the -device arg so that SG_IO commands are specifically forbidden). Guests which continue to use disk device='disk' (the default) will no longer be able to use SG_IO commands on the disk; those that have their disk device changed to device='lun' will still be able to use SG_IO commands. *docs/formatdomain.html.in - document the new device attribute value. *docs/schemas/domaincommon.rng - allow it in the RNG *tests/* - update the args of several existing tests to add scsi=off, and add one new test that will test scsi=on. *src/conf/domain_conf.c - update domain XML parser and formatter *src/qemu/qemu_(command|driver|hotplug).c - treat VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above. Note that no support for this new device value was added to any hypervisor drivers other than qemu, because it's unclear what it might mean (if anything) to those drivers.
2012-01-05 03:48:38 +00:00
QEMU_CAPS_BOOTINDEX,
QEMU_CAPS_VIRTIO_BLK_SCSI);
DO_TEST("boot-strict",
QEMU_CAPS_DRIVE_BOOT,
QEMU_CAPS_BOOTINDEX, QEMU_CAPS_BOOT_STRICT,
QEMU_CAPS_VIRTIO_BLK_SCSI);
2012-09-18 10:32:07 +00:00
DO_TEST("reboot-timeout-disabled", QEMU_CAPS_REBOOT_TIMEOUT);
DO_TEST("reboot-timeout-enabled", QEMU_CAPS_REBOOT_TIMEOUT);
DO_TEST_FAILURE("reboot-timeout-enabled", NONE);
DO_TEST("bios", QEMU_CAPS_SGA);
DO_TEST("bios-nvram", NONE);
DO_TEST("bios-nvram-secure",
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACHINE_SMM_OPT,
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST("clock-utc", QEMU_CAPS_NODEFCONFIG);
DO_TEST("clock-localtime", NONE);
DO_TEST("clock-localtime-basis-localtime", QEMU_CAPS_RTC);
DO_TEST("clock-variable", QEMU_CAPS_RTC);
DO_TEST("clock-france", QEMU_CAPS_RTC);
DO_TEST("clock-hpet-off", QEMU_CAPS_RTC, QEMU_CAPS_NO_HPET,
QEMU_CAPS_NO_KVM_PIT);
DO_TEST("clock-catchup", QEMU_CAPS_RTC, QEMU_CAPS_NO_KVM_PIT);
DO_TEST("cpu-kvmclock", QEMU_CAPS_ENABLE_KVM);
DO_TEST("cpu-host-kvmclock", QEMU_CAPS_ENABLE_KVM);
DO_TEST("kvmclock", QEMU_CAPS_KVM);
DO_TEST("clock-timer-hyperv-rtc", QEMU_CAPS_KVM);
DO_TEST("cpu-eoi-disabled", QEMU_CAPS_ENABLE_KVM);
DO_TEST("cpu-eoi-enabled", QEMU_CAPS_ENABLE_KVM);
DO_TEST("controller-order",
QEMU_CAPS_KVM, QEMU_CAPS_ENABLE_KVM,
2012-11-05 11:12:04 +00:00
QEMU_CAPS_BOOT_MENU, QEMU_CAPS_PIIX3_USB_UHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_DRIVE_AIO,
QEMU_CAPS_CCID_PASSTHRU, QEMU_CAPS_CHARDEV,
QEMU_CAPS_CHARDEV_SPICEVMC, QEMU_CAPS_SPICE,
QEMU_CAPS_HDA_DUPLEX, QEMU_CAPS_USB_HUB,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("eoi-disabled", NONE);
DO_TEST("eoi-enabled", NONE);
DO_TEST("pv-spinlock-disabled", NONE);
DO_TEST("pv-spinlock-enabled", NONE);
DO_TEST("kvmclock+eoi-disabled", QEMU_CAPS_ENABLE_KVM);
DO_TEST("hyperv", NONE);
DO_TEST("hyperv-off", NONE);
DO_TEST("hyperv-panic", NONE);
DO_TEST("kvm-features", NONE);
DO_TEST("kvm-features-off", NONE);
DO_TEST("pmu-feature", NONE);
DO_TEST("pmu-feature-off", NONE);
DO_TEST("hugepages", QEMU_CAPS_MEM_PATH);
DO_TEST("hugepages-numa", QEMU_CAPS_RTC, QEMU_CAPS_NO_KVM_PIT,
QEMU_CAPS_PIIX_DISABLE_S3, QEMU_CAPS_PIIX_DISABLE_S4,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_ICH9_USB_EHCI1, QEMU_CAPS_PCI_MULTIFUNCTION,
QEMU_CAPS_SPICE, QEMU_CAPS_CHARDEV_SPICEVMC,
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_HDA_DUPLEX, QEMU_CAPS_USB_REDIR,
qemuBuildMemoryBackendStr: Honour passed @pagesize So far the argument has not much meaning and was practically ignored. This is not good since when doing memory hotplug, the size of desired hugepage backing is passed in that argument. Taking closer look at the tests I'm fixing reveals the bug. For instance, while the following is in the test: <memory model='dimm'> <source> <nodemask>1-3</nodemask> <pagesize unit='KiB'>4096</pagesize> </source> <target> <size unit='KiB'>524287</size> <node>0</node> </target> <address type='dimm' slot='0' base='0x100000000'/> </memory> the generated commandline corresponding to this XML was: -object memory-backend-ram,id=memdimm0,size=536870912,\ host-nodes=1-3,policy=bind Have you noticed? Yes, memory-backend-ram! Nothing can be further away from the right answer. The hugepage backing is requested in the XML and we happily ignore it. This is just not right. It's memory-backend-file which should have been used: -object memory-backend-file,id=memdimm0,prealloc=yes,\ mem-path=/dev/hugepages4M/libvirt/qemu,size=536870912,\ host-nodes=1-3,policy=bind The problem is, that @pagesize passed to qemuBuildMemoryBackendStr (where this part of commandline is built) was ignored. The hugepage to back memory was searched only and only by NUMA nodes pinning. This works only for regular guest NUMA nodes. Then, I'm changing the hugepages size in the test XMLs too. This is simply because in the test suite we create dummy mount points just for 2M and 1G hugepages. And in the test 4M was requested. I'm sticking to 2M, but 1G should just work too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-25 15:27:29 +00:00
QEMU_CAPS_DEVICE_PC_DIMM,
QEMU_CAPS_MEM_PATH, QEMU_CAPS_OBJECT_MEMORY_FILE);
DO_TEST_LINUX("hugepages-pages", QEMU_CAPS_MEM_PATH,
QEMU_CAPS_OBJECT_MEMORY_RAM,
QEMU_CAPS_OBJECT_MEMORY_FILE);
DO_TEST("hugepages-pages2", QEMU_CAPS_MEM_PATH, QEMU_CAPS_OBJECT_MEMORY_RAM,
QEMU_CAPS_OBJECT_MEMORY_FILE);
DO_TEST("hugepages-pages3", QEMU_CAPS_MEM_PATH, QEMU_CAPS_OBJECT_MEMORY_RAM,
QEMU_CAPS_OBJECT_MEMORY_FILE);
DO_TEST_LINUX("hugepages-shared", QEMU_CAPS_MEM_PATH,
QEMU_CAPS_OBJECT_MEMORY_RAM,
QEMU_CAPS_OBJECT_MEMORY_FILE);
DO_TEST_PARSE_ERROR("hugepages-memaccess-invalid", NONE);
DO_TEST_FAILURE("hugepages-pages4", QEMU_CAPS_MEM_PATH,
QEMU_CAPS_OBJECT_MEMORY_RAM, QEMU_CAPS_OBJECT_MEMORY_FILE);
DO_TEST("hugepages-pages5", QEMU_CAPS_MEM_PATH);
DO_TEST("hugepages-pages6", NONE);
DO_TEST("nosharepages", QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_MEM_MERGE);
DO_TEST("disk-cdrom", NONE);
DO_TEST("disk-iscsi", NONE);
DO_TEST("disk-cdrom-network-http", QEMU_CAPS_KVM);
DO_TEST("disk-cdrom-network-https", QEMU_CAPS_KVM);
DO_TEST("disk-cdrom-network-ftp", QEMU_CAPS_KVM);
DO_TEST("disk-cdrom-network-ftps", QEMU_CAPS_KVM);
DO_TEST("disk-cdrom-network-tftp", QEMU_CAPS_KVM);
DO_TEST("disk-cdrom-empty", NONE);
DO_TEST("disk-cdrom-tray",
QEMU_CAPS_VIRTIO_TX_ALG);
DO_TEST("disk-cdrom-tray-no-device-cap", NONE);
DO_TEST("disk-floppy", NONE);
DO_TEST_FAILURE("disk-floppy-pseries", NONE);
DO_TEST("disk-floppy-tray-no-device-cap", NONE);
DO_TEST("disk-floppy-tray", NONE);
DO_TEST("disk-virtio-s390",
QEMU_CAPS_VIRTIO_S390);
DO_TEST("disk-many", NONE);
DO_TEST("disk-virtio", QEMU_CAPS_DRIVE_BOOT);
DO_TEST("disk-virtio-ccw",
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST("disk-virtio-ccw-many",
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST("disk-virtio-scsi-ccw", QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST("disk-order",
QEMU_CAPS_DRIVE_BOOT, QEMU_CAPS_VIRTIO_BLK_SCSI);
DO_TEST("disk-drive-boot-disk",
QEMU_CAPS_DRIVE_BOOT);
DO_TEST("disk-drive-boot-cdrom",
QEMU_CAPS_DRIVE_BOOT);
DO_TEST("floppy-drive-fat",
QEMU_CAPS_DRIVE_BOOT);
DO_TEST("disk-drive-readonly-disk",
QEMU_CAPS_NODEFCONFIG);
DO_TEST("disk-drive-readonly-no-device",
QEMU_CAPS_NODEFCONFIG);
DO_TEST("disk-drive-fmt-qcow",
QEMU_CAPS_DRIVE_BOOT);
DO_TEST("disk-drive-shared",
QEMU_CAPS_DRIVE_SERIAL);
DO_TEST("disk-drive-error-policy-stop",
QEMU_CAPS_MONITOR_JSON);
DO_TEST("disk-drive-error-policy-enospace",
QEMU_CAPS_MONITOR_JSON);
DO_TEST("disk-drive-error-policy-wreport-rignore",
QEMU_CAPS_MONITOR_JSON);
DO_TEST("disk-drive-cache-v2-wt", NONE);
DO_TEST("disk-drive-cache-v2-wb", NONE);
DO_TEST("disk-drive-cache-v2-none", NONE);
DO_TEST("disk-drive-cache-directsync",
QEMU_CAPS_DRIVE_CACHE_DIRECTSYNC);
DO_TEST("disk-drive-cache-unsafe",
QEMU_CAPS_DRIVE_CACHE_UNSAFE);
DO_TEST("disk-drive-copy-on-read",
QEMU_CAPS_DRIVE_COPY_ON_READ);
DO_TEST("disk-drive-network-nbd", NONE);
DO_TEST("disk-drive-network-nbd-export", NONE);
DO_TEST("disk-drive-network-nbd-ipv6", NONE);
DO_TEST("disk-drive-network-nbd-ipv6-export", NONE);
DO_TEST("disk-drive-network-nbd-unix", NONE);
DO_TEST("disk-drive-network-iscsi", NONE);
DO_TEST("disk-drive-network-iscsi-auth", NONE);
DO_TEST("disk-drive-network-iscsi-lun",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_SCSI_BLOCK);
DO_TEST("disk-drive-network-gluster",
QEMU_CAPS_GLUSTER_DEBUG_LEVEL);
DO_TEST("disk-drive-network-rbd", NONE);
DO_TEST("disk-drive-network-sheepdog", NONE);
DO_TEST("disk-drive-network-rbd-auth", NONE);
# ifdef HAVE_GNUTLS_CIPHER_ENCRYPT
qemu: Utilize qemu secret objects for RBD auth/secret https://bugzilla.redhat.com/show_bug.cgi?id=1182074 If they're available and we need to pass secrets to qemu, then use the qemu domain secret object in order to pass the secrets for RBD volumes instead of passing the base64 encoded secret on the command line. The goal is to make AES secrets the default and have no user interaction required in order to allow using the AES mechanism. If the mechanism is not available, then fall back to the current plain mechanism using a base64 encoded secret. New APIs: qemu_domain.c: qemuDomainGetSecretAESAlias: Generate/return the secret object alias for an AES Secret Info type. This will be called from qemuDomainSecretAESSetup. qemuDomainSecretAESSetup: (private) This API handles the details of the generation of the AES secret and saves the pieces that need to be passed to qemu in order for the secret to be decrypted. The encrypted secret based upon the domain master key, an initialization vector (16 byte random value), and the stored secret. Finally, the requirement from qemu is the IV and encrypted secret are to be base64 encoded. qemu_command.c: qemuBuildSecretInfoProps: (private) Generate/return a JSON properties object for the AES secret to be used by both the command building and eventually the hotplug code in order to add the secret object. Code was designed so that in the future perhaps hotplug could use it if it made sense. qemuBuildObjectSecretCommandLine (private) Generate and add to the command line the -object secret for the secret. This will be required for the subsequent RBD reference to the object. qemuBuildDiskSecinfoCommandLine (private) Handle adding the AES secret object. Adjustments: qemu_domain.c: The qemuDomainSecretSetup was altered to call either the AES or Plain Setup functions based upon whether AES secrets are possible (we have the encryption API) or not, we have secrets, and of course if the protocol source is RBD. qemu_command.c: Adjust the qemuBuildRBDSecinfoURI API's in order to generate the specific command options for an AES secret, such as: -object secret,id=$alias,keyid=$masterKey,data=$base64encodedencrypted, format=base64 -drive file=rbd:pool/image:id=myname:auth_supported=cephx\;none:\ mon_host=mon1.example.org\:6321,password-secret=$alias,... where the 'id=' value is the secret object alias generated by concatenating the disk alias and "-aesKey0". The 'keyid= $masterKey' is the master key shared with qemu, and the -drive syntax will reference that alias as the 'password-secret'. For the -drive syntax, the 'id=myname' is kept to define the username, while the 'key=$base64 encoded secret' is removed. While according to the syntax described for qemu commit '60390a21' or as seen in the email archive: https://lists.gnu.org/archive/html/qemu-devel/2016-01/msg04083.html it is possible to pass a plaintext password via a file, the qemu commit 'ac1d8878' describes the more feature rich 'keyid=' option based upon the shared masterKey. Add tests for checking/comparing output. NB: For hotplug, since the hotplug code doesn't add command line arguments, passing the encoded secret directly to the monitor will suffice.
2016-04-11 15:26:14 +00:00
DO_TEST("disk-drive-network-rbd-auth-AES",
QEMU_CAPS_OBJECT_SECRET, QEMU_CAPS_VIRTIO_SCSI);
# endif
DO_TEST("disk-drive-network-rbd-ipv6", NONE);
DO_TEST_FAILURE("disk-drive-network-rbd-no-colon", NONE);
DO_TEST("disk-drive-no-boot",
QEMU_CAPS_BOOTINDEX);
DO_TEST_PARSE_ERROR("disk-device-lun-type-invalid",
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST_FAILURE("disk-usb-nosupport", NONE);
DO_TEST("disk-usb-device",
QEMU_CAPS_DEVICE_USB_STORAGE,
QEMU_CAPS_NODEFCONFIG);
DO_TEST("disk-usb-device-removable",
QEMU_CAPS_DEVICE_USB_STORAGE,
QEMU_CAPS_USB_STORAGE_REMOVABLE, QEMU_CAPS_NODEFCONFIG);
DO_TEST_FAILURE("disk-usb-pci",
QEMU_CAPS_DEVICE_USB_STORAGE, QEMU_CAPS_NODEFCONFIG);
DO_TEST("disk-scsi-device",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_LSI);
DO_TEST("disk-scsi-device-auto",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_LSI);
DO_TEST("disk-scsi-disk-split",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_CD, QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI);
DO_TEST("disk-scsi-disk-wwn",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_CD, QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_SCSI_DISK_WWN);
DO_TEST("disk-scsi-disk-vpd",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_CD, QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_SCSI_DISK_WWN);
DO_TEST_FAILURE("disk-scsi-disk-vpd-build-error",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_CD, QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_SCSI_DISK_WWN);
DO_TEST("disk-scsi-vscsi",
QEMU_CAPS_NODEFCONFIG);
DO_TEST("disk-scsi-virtio-scsi",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST("disk-virtio-scsi-num_queues",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST("disk-virtio-scsi-cmd_per_lun",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST("disk-virtio-scsi-max_sectors",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_SCSI);
DO_TEST("disk-virtio-scsi-ioeventfd",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_IOEVENTFD, QEMU_CAPS_VIRTIO_SCSI);
DO_TEST("disk-scsi-megasas",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_MEGASAS);
DO_TEST("disk-scsi-mptsas1068",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SCSI_MPTSAS1068,
QEMU_CAPS_SCSI_DISK_WWN);
DO_TEST("disk-sata-device",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_ICH9_AHCI);
DO_TEST("disk-aio",
QEMU_CAPS_DRIVE_AIO);
DO_TEST("disk-source-pool",
QEMU_CAPS_NODEFCONFIG);
DO_TEST("disk-source-pool-mode",
QEMU_CAPS_NODEFCONFIG);
DO_TEST("disk-ioeventfd",
QEMU_CAPS_VIRTIO_IOEVENTFD,
QEMU_CAPS_VIRTIO_TX_ALG,
QEMU_CAPS_VIRTIO_BLK_SCSI);
DO_TEST("disk-copy_on_read",
QEMU_CAPS_DRIVE_COPY_ON_READ,
QEMU_CAPS_VIRTIO_TX_ALG,
QEMU_CAPS_VIRTIO_BLK_SCSI);
DO_TEST("disk-drive-discard",
QEMU_CAPS_DRIVE_DISCARD);
DO_TEST("disk-drive-detect-zeroes",
QEMU_CAPS_DRIVE_DISCARD,
QEMU_CAPS_DRIVE_DETECT_ZEROES);
DO_TEST("disk-snapshot", NONE);
DO_TEST_PARSE_ERROR("disk-same-targets",
QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_USB_STORAGE, QEMU_CAPS_NODEFCONFIG);
DO_TEST("event_idx",
qemu: support event_idx parameter for virtio disk and net devices In some versions of qemu, both virtio-blk-pci and virtio-net-pci devices can have an event_idx setting that determines some details of event processing. When it is enabled, it "reduces the number of interrupts and exits for the guest". qemu will automatically enable this feature when it is available, but there may be cases where this new feature could actually make performance worse (NB: no such case has been found so far). As a safety switch in case such a situation is encountered in the field, this patch adds a new attribute "event_idx" to the <driver> element of both disk and interface devices. event_idx can be set to "on" (to force event_idx on in case qemu has it disabled by default) or "off" (for force event_idx off). In the case that event_idx support isn't present in qemu, the attribute is ignored (this on the advice of the qemu developer). docs/formatdomain.html.in: document the new flag (marking it as "don't mess with this!" docs/schemas/domain.rng: add event_idx in appropriate places src/conf/domain_conf.[ch]: add event_idx to parser and formatter src/libvirt_private.syms: export virDomainVirtioEventIdx(From|To)String src/qemu/qemu_capabilities.[ch]: detect and report event_idx in disk/net src/qemu/qemu_command.c: add event_idx parameter to qemu commandline when appropriate. tests/qemuxml2argvdata/qemuxml2argv-event_idx.args, tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml, tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: test cases for event_idx.
2011-08-13 06:32:45 +00:00
QEMU_CAPS_VIRTIO_BLK_EVENT_IDX,
QEMU_CAPS_VIRTIO_NET_EVENT_IDX,
QEMU_CAPS_VIRTIO_BLK_SCSI);
DO_TEST("virtio-lun",
QEMU_CAPS_VIRTIO_BLK_SCSI);
DO_TEST("disk-scsi-lun-passthrough",
QEMU_CAPS_SCSI_BLOCK,
QEMU_CAPS_SCSI_LSI, QEMU_CAPS_VIRTIO_SCSI);
DO_TEST("disk-serial",
QEMU_CAPS_KVM,
QEMU_CAPS_DRIVE_SERIAL);
DO_TEST("graphics-vnc", QEMU_CAPS_VNC, QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("graphics-vnc-socket", QEMU_CAPS_VNC, QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("graphics-vnc-websocket", QEMU_CAPS_VNC, QEMU_CAPS_VNC_WEBSOCKET,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("graphics-vnc-policy", QEMU_CAPS_VNC, QEMU_CAPS_VNC_SHARE_POLICY,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("graphics-vnc-no-listen-attr", QEMU_CAPS_VNC,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("graphics-vnc-remove-generated-socket", QEMU_CAPS_VNC,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
driver.config->vncAutoUnixSocket = true;
DO_TEST("graphics-vnc-auto-socket-cfg", QEMU_CAPS_VNC,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
driver.config->vncAutoUnixSocket = false;
DO_TEST("graphics-vnc-socket", QEMU_CAPS_VNC, QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("graphics-vnc-auto-socket", QEMU_CAPS_VNC,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("graphics-vnc-none", QEMU_CAPS_VNC, QEMU_CAPS_DEVICE_CIRRUS_VGA);
2009-03-16 13:54:26 +00:00
driver.config->vncSASL = 1;
VIR_FREE(driver.config->vncSASLdir);
ignore_value(VIR_STRDUP(driver.config->vncSASLdir, "/root/.sasl2"));
DO_TEST("graphics-vnc-sasl", QEMU_CAPS_VNC, QEMU_CAPS_DEVICE_CIRRUS_VGA);
driver.config->vncTLS = 1;
driver.config->vncTLSx509verify = 1;
DO_TEST("graphics-vnc-tls", QEMU_CAPS_VNC, QEMU_CAPS_DEVICE_CIRRUS_VGA);
driver.config->vncSASL = driver.config->vncTLSx509verify = driver.config->vncTLS = 0;
VIR_FREE(driver.config->vncSASLdir);
VIR_FREE(driver.config->vncTLSx509certdir);
2009-03-16 13:54:26 +00:00
DO_TEST("graphics-sdl", QEMU_CAPS_SDL, QEMU_CAPS_DEVICE_VGA);
DO_TEST("graphics-sdl-fullscreen", QEMU_CAPS_SDL,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("nographics", NONE);
DO_TEST("nographics-display",
QEMU_CAPS_DISPLAY);
DO_TEST("nographics-vga",
QEMU_CAPS_VGA_NONE);
DO_TEST("graphics-spice",
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_SPICE_FILE_XFER_DISABLE);
DO_TEST("graphics-spice-no-args",
QEMU_CAPS_SPICE, QEMU_CAPS_DEVICE_CIRRUS_VGA);
driver.config->spiceSASL = 1;
ignore_value(VIR_STRDUP(driver.config->spiceSASLdir, "/root/.sasl2"));
DO_TEST("graphics-spice-sasl",
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_QXL);
VIR_FREE(driver.config->spiceSASLdir);
driver.config->spiceSASL = 0;
DO_TEST("graphics-spice-agentmouse",
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_SPICE,
QEMU_CAPS_CHARDEV_SPICEVMC,
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("graphics-spice-compression",
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("graphics-spice-timeout",
QEMU_CAPS_KVM,
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_DEVICE_VGA);
DO_TEST("graphics-spice-qxl-vga",
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("graphics-spice-usb-redir",
QEMU_CAPS_SPICE,
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_USB_HUB,
QEMU_CAPS_ICH9_USB_EHCI1, QEMU_CAPS_USB_REDIR,
QEMU_CAPS_CHARDEV_SPICEVMC, QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("graphics-spice-agent-file-xfer",
QEMU_CAPS_SPICE,
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_SPICE_FILE_XFER_DISABLE);
DO_TEST("graphics-spice-socket",
QEMU_CAPS_SPICE,
QEMU_CAPS_SPICE_UNIX,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("graphics-spice-auto-socket",
QEMU_CAPS_SPICE,
QEMU_CAPS_SPICE_UNIX,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
driver.config->spiceAutoUnixSocket = true;
DO_TEST("graphics-spice-auto-socket-cfg",
QEMU_CAPS_SPICE,
QEMU_CAPS_SPICE_UNIX,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
driver.config->spiceAutoUnixSocket = false;
DO_TEST("input-usbmouse", NONE);
DO_TEST("input-usbtablet", NONE);
DO_TEST("misc-acpi", NONE);
DO_TEST("misc-disable-s3", QEMU_CAPS_PIIX_DISABLE_S3);
DO_TEST("misc-disable-suspends", QEMU_CAPS_PIIX_DISABLE_S3, QEMU_CAPS_PIIX_DISABLE_S4);
DO_TEST("misc-enable-s4", QEMU_CAPS_PIIX_DISABLE_S4);
DO_TEST_FAILURE("misc-enable-s4", NONE);
DO_TEST("misc-no-reboot", NONE);
DO_TEST("misc-uuid", NONE);
DO_TEST_PARSE_ERROR("vhost_queues-invalid", NONE);
DO_TEST("net-vhostuser", QEMU_CAPS_NETDEV);
DO_TEST("net-vhostuser-multiq",
QEMU_CAPS_NETDEV, QEMU_CAPS_VHOSTUSER_MULTIQUEUE);
DO_TEST_FAILURE("net-vhostuser-multiq", QEMU_CAPS_NETDEV);
DO_TEST_FAILURE("net-vhostuser-fail",
QEMU_CAPS_NETDEV,
QEMU_CAPS_VHOSTUSER_MULTIQUEUE);
DO_TEST("net-user", NONE);
DO_TEST("net-virtio", NONE);
DO_TEST("net-virtio-device",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_VIRTIO_TX_ALG);
DO_TEST("net-virtio-disable-offloads",
QEMU_CAPS_NODEFCONFIG);
DO_TEST("net-virtio-netdev",
QEMU_CAPS_NETDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("net-virtio-s390",
QEMU_CAPS_VIRTIO_S390);
DO_TEST("net-virtio-ccw",
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST("net-virtio-rxqueuesize",
QEMU_CAPS_VIRTIO_NET_RX_QUEUE_SIZE);
DO_TEST_PARSE_ERROR("net-virtio-rxqueuesize-invalid-size", NONE);
DO_TEST("net-eth", NONE);
DO_TEST("net-eth-ifname", NONE);
DO_TEST("net-eth-names", NONE);
DO_TEST("net-eth-hostip", NONE);
DO_TEST("net-client", NONE);
DO_TEST("net-server", NONE);
DO_TEST("net-mcast", NONE);
DO_TEST("net-udp", NONE);
DO_TEST("net-hostdev",
QEMU_CAPS_NODEFCONFIG);
DO_TEST("net-hostdev-multidomain",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_HOST_PCI_MULTIDOMAIN);
DO_TEST_FAILURE("net-hostdev-multidomain",
QEMU_CAPS_NODEFCONFIG);
DO_TEST("net-hostdev-vfio",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("net-hostdev-vfio-multidomain",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_DEVICE_VFIO_PCI, QEMU_CAPS_HOST_PCI_MULTIDOMAIN);
DO_TEST_FAILURE("net-hostdev-vfio-multidomain",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST_FAILURE("net-hostdev-fail",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("serial-vc", NONE);
DO_TEST("serial-pty", NONE);
DO_TEST("serial-dev", NONE);
DO_TEST("serial-file", NONE);
DO_TEST("serial-file-log", QEMU_CAPS_CHARDEV, QEMU_CAPS_CHARDEV_FILE_APPEND,
QEMU_CAPS_CHARDEV_LOGFILE);
DO_TEST("serial-unix", NONE);
DO_TEST("serial-tcp", NONE);
DO_TEST("serial-udp", NONE);
DO_TEST("serial-tcp-telnet", NONE);
DO_TEST("serial-many", NONE);
DO_TEST("serial-spiceport",
QEMU_CAPS_CHARDEV,
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_SPICE, QEMU_CAPS_CHARDEV_SPICEPORT);
DO_TEST("serial-spiceport-nospice", NONE);
DO_TEST("parallel-tcp", NONE);
DO_TEST("console-compat", NONE);
DO_TEST("console-compat-auto", NONE);
DO_TEST("serial-vc-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("serial-pty-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("serial-dev-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("serial-dev-chardev-iobase",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("serial-file-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_CHARDEV_FILE_APPEND);
DO_TEST("serial-unix-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("serial-tcp-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("serial-udp-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("serial-tcp-telnet-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
driver.config->chardevTLS = 1;
DO_TEST("serial-tcp-tlsx509-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_OBJECT_TLS_CREDS_X509);
driver.config->chardevTLSx509verify = 1;
DO_TEST("serial-tcp-tlsx509-chardev-verify",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_OBJECT_TLS_CREDS_X509);
driver.config->chardevTLSx509verify = 0;
DO_TEST("serial-tcp-tlsx509-chardev-notls",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_OBJECT_TLS_CREDS_X509);
VIR_FREE(driver.config->chardevTLSx509certdir);
if (VIR_STRDUP_QUIET(driver.config->chardevTLSx509certdir, "/etc/pki/libvirt-chardev") < 0)
return EXIT_FAILURE;
if (VIR_STRDUP_QUIET(driver.config->chardevTLSx509secretUUID,
"6fd3f62d-9fe7-4a4e-a869-7acd6376d8ea") < 0)
return EXIT_FAILURE;
# ifdef HAVE_GNUTLS_CIPHER_ENCRYPT
DO_TEST("serial-tcp-tlsx509-secret-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_OBJECT_SECRET,
QEMU_CAPS_OBJECT_TLS_CREDS_X509);
# else
DO_TEST_FAILURE("serial-tcp-tlsx509-secret-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_OBJECT_SECRET,
QEMU_CAPS_OBJECT_TLS_CREDS_X509);
# endif
driver.config->chardevTLS = 0;
VIR_FREE(driver.config->chardevTLSx509certdir);
DO_TEST("serial-many-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("parallel-tcp-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("parallel-parport-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("console-compat-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("pci-serial-dev-chardev",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_DEVICE_PCI_SERIAL);
DO_TEST("channel-guestfwd",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("channel-virtio",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("channel-virtio-state",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("channel-virtio-auto",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("channel-virtio-autoassign",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("channel-virtio-autoadd",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("console-virtio",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("console-virtio-many",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("console-virtio-s390",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_BOOTINDEX, QEMU_CAPS_VIRTIO_S390);
DO_TEST("console-virtio-ccw",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_BOOTINDEX, QEMU_CAPS_VIRTIO_CCW,
QEMU_CAPS_VIRTIO_S390);
DO_TEST("console-sclp",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_S390, QEMU_CAPS_SCLP_S390);
DO_TEST("channel-spicevmc",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SPICE, QEMU_CAPS_CHARDEV_SPICEVMC,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("channel-spicevmc-old",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SPICE, QEMU_CAPS_DEVICE_SPICEVMC,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("channel-virtio-default",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_SPICE, QEMU_CAPS_CHARDEV_SPICEVMC);
DO_TEST("channel-virtio-unix",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("smartcard-host",
QEMU_CAPS_CHARDEV,
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_CCID_EMULATED);
DO_TEST("smartcard-host-certificates",
QEMU_CAPS_CHARDEV,
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_CCID_EMULATED);
DO_TEST("smartcard-passthrough-tcp",
QEMU_CAPS_CHARDEV,
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_CCID_PASSTHRU);
DO_TEST("smartcard-passthrough-spicevmc",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_CCID_PASSTHRU, QEMU_CAPS_CHARDEV_SPICEVMC);
DO_TEST("smartcard-controller",
QEMU_CAPS_CHARDEV,
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_CCID_EMULATED);
DO_TEST("usb-controller",
QEMU_CAPS_CHARDEV,
QEMU_CAPS_NODEFCONFIG);
DO_TEST("usb-piix3-controller",
QEMU_CAPS_CHARDEV, QEMU_CAPS_PIIX3_USB_UHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_NODEFCONFIG);
DO_TEST("usb-ich9-ehci-addr",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1);
DO_TEST("input-usbmouse-addr",
QEMU_CAPS_NODEFCONFIG);
DO_TEST("usb-ich9-companion",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1);
DO_TEST_PARSE_ERROR("usb-ich9-no-companion",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1);
DO_TEST("usb-ich9-autoassign",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_USB_HUB);
DO_TEST("usb-hub",
QEMU_CAPS_CHARDEV, QEMU_CAPS_USB_HUB,
QEMU_CAPS_NODEFCONFIG);
DO_TEST("usb-hub-autoadd",
QEMU_CAPS_CHARDEV, QEMU_CAPS_USB_HUB,
QEMU_CAPS_NODEFCONFIG);
DO_TEST_PARSE_ERROR("usb-hub-conflict",
QEMU_CAPS_CHARDEV, QEMU_CAPS_USB_HUB,
QEMU_CAPS_NODEFCONFIG);
DO_TEST_PARSE_ERROR("usb-hub-nonexistent",
QEMU_CAPS_CHARDEV, QEMU_CAPS_USB_HUB,
QEMU_CAPS_NODEFCONFIG);
DO_TEST("usb-port-missing",
QEMU_CAPS_CHARDEV, QEMU_CAPS_USB_HUB,
QEMU_CAPS_NODEFCONFIG);
DO_TEST("usb-ports",
QEMU_CAPS_CHARDEV, QEMU_CAPS_USB_HUB,
QEMU_CAPS_NODEFCONFIG);
DO_TEST("usb-port-autoassign",
QEMU_CAPS_CHARDEV, QEMU_CAPS_USB_HUB,
QEMU_CAPS_NODEFCONFIG);
DO_TEST("usb-redir",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_USB_HUB,
QEMU_CAPS_ICH9_USB_EHCI1, QEMU_CAPS_USB_REDIR,
QEMU_CAPS_SPICE, QEMU_CAPS_CHARDEV_SPICEVMC);
DO_TEST("usb-redir-boot",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_USB_HUB,
QEMU_CAPS_ICH9_USB_EHCI1, QEMU_CAPS_USB_REDIR,
QEMU_CAPS_SPICE, QEMU_CAPS_CHARDEV_SPICEVMC, QEMU_CAPS_BOOTINDEX,
QEMU_CAPS_USB_REDIR_BOOTINDEX);
DO_TEST("usb-redir-filter",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_USB_HUB,
QEMU_CAPS_ICH9_USB_EHCI1, QEMU_CAPS_USB_REDIR,
QEMU_CAPS_SPICE, QEMU_CAPS_CHARDEV_SPICEVMC,
QEMU_CAPS_USB_REDIR_FILTER);
DO_TEST("usb-redir-filter-version",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_USB_REDIR,
QEMU_CAPS_SPICE, QEMU_CAPS_CHARDEV_SPICEVMC,
QEMU_CAPS_USB_REDIR_FILTER);
DO_TEST("usb1-usb2",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
2011-09-05 07:07:01 +00:00
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_PIIX3_USB_UHCI,
QEMU_CAPS_USB_HUB, QEMU_CAPS_ICH9_USB_EHCI1);
DO_TEST("usb-none",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST_PARSE_ERROR("usb-none-other",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST_PARSE_ERROR("usb-none-hub",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_USB_HUB);
DO_TEST_PARSE_ERROR("usb-none-usbtablet",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("usb-controller-default-q35",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE, QEMU_CAPS_PCI_OHCI,
QEMU_CAPS_PIIX3_USB_UHCI, QEMU_CAPS_NEC_USB_XHCI);
DO_TEST_FAILURE("usb-controller-default-unavailable-q35",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE, QEMU_CAPS_PCI_OHCI,
QEMU_CAPS_NEC_USB_XHCI);
DO_TEST("usb-controller-explicit-q35",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE, QEMU_CAPS_PCI_OHCI,
QEMU_CAPS_PIIX3_USB_UHCI, QEMU_CAPS_NEC_USB_XHCI);
DO_TEST_FAILURE("usb-controller-explicit-unavailable-q35",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE, QEMU_CAPS_PCI_OHCI,
QEMU_CAPS_PIIX3_USB_UHCI);
DO_TEST("usb-controller-xhci",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_PIIX3_USB_UHCI,
QEMU_CAPS_NEC_USB_XHCI, QEMU_CAPS_NEC_USB_XHCI_PORTS);
DO_TEST("usb-xhci-autoassign",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_PIIX3_USB_UHCI,
QEMU_CAPS_NEC_USB_XHCI, QEMU_CAPS_NEC_USB_XHCI_PORTS,
QEMU_CAPS_USB_HUB);
DO_TEST("smbios", QEMU_CAPS_SMBIOS_TYPE);
DO_TEST_PARSE_ERROR("smbios-date", QEMU_CAPS_SMBIOS_TYPE);
DO_TEST_PARSE_ERROR("smbios-uuid-match", QEMU_CAPS_SMBIOS_TYPE);
DO_TEST("watchdog", NONE);
DO_TEST("watchdog-device", QEMU_CAPS_NODEFCONFIG);
DO_TEST("watchdog-dump", NONE);
DO_TEST("watchdog-injectnmi", NONE);
DO_TEST("watchdog-diag288",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_BOOTINDEX, QEMU_CAPS_VIRTIO_S390);
DO_TEST("balloon-device", QEMU_CAPS_NODEFCONFIG);
DO_TEST("balloon-device-deflate", QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_BALLOON_AUTODEFLATE);
DO_TEST("balloon-ccw-deflate", QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_BALLOON_AUTODEFLATE);
DO_TEST("balloon-mmio-deflate", QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_DTB, QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_VIRTIO_BALLOON_AUTODEFLATE);
DO_TEST("balloon-device-deflate-off", QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_BALLOON_AUTODEFLATE);
DO_TEST("balloon-device-auto",
QEMU_CAPS_NODEFCONFIG);
DO_TEST("balloon-device-period", QEMU_CAPS_NODEFCONFIG);
DO_TEST("sound", NONE);
DO_TEST("sound-device",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_HDA_DUPLEX, QEMU_CAPS_HDA_MICRO,
QEMU_CAPS_DEVICE_ICH9_INTEL_HDA,
QEMU_CAPS_OBJECT_USB_AUDIO);
DO_TEST("fs9p",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_FSDEV,
QEMU_CAPS_FSDEV_WRITEOUT);
DO_TEST("fs9p-ccw",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_FSDEV,
QEMU_CAPS_FSDEV_WRITEOUT,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST("hostdev-usb-address", NONE);
DO_TEST("hostdev-usb-address-device",
QEMU_CAPS_NODEFCONFIG);
DO_TEST("hostdev-usb-address-device-boot",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_BOOTINDEX,
QEMU_CAPS_USB_HOST_BOOTINDEX);
DO_TEST("hostdev-pci-address", NONE);
DO_TEST("hostdev-pci-address-device",
QEMU_CAPS_NODEFCONFIG);
DO_TEST("hostdev-vfio",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("hostdev-vfio-multidomain",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_DEVICE_VFIO_PCI, QEMU_CAPS_HOST_PCI_MULTIDOMAIN);
DO_TEST_FAILURE("hostdev-vfio-multidomain",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("pci-rom",
QEMU_CAPS_NODEFCONFIG);
DO_TEST_FULL("restore-v2", "exec:cat", 7, 0, 0, GIC_NONE, NONE);
DO_TEST_FULL("restore-v2-fd", "stdio", 7, 0, 0, GIC_NONE, NONE);
DO_TEST_FULL("restore-v2-fd", "fd:7", 7, 0, 0, GIC_NONE, NONE);
DO_TEST_FULL("migrate", "tcp:10.0.0.1:5000", -1, 0, 0, GIC_NONE, NONE);
DO_TEST_LINUX_FULL("migrate-numa-unaligned", "stdio", 7, 0, 0, GIC_NONE,
QEMU_CAPS_NUMA,
QEMU_CAPS_OBJECT_MEMORY_RAM);
DO_TEST("qemu-ns", NONE);
DO_TEST("qemu-ns-no-env", NONE);
DO_TEST("smp", NONE);
DO_TEST("iothreads", QEMU_CAPS_OBJECT_IOTHREAD);
DO_TEST("iothreads-ids", QEMU_CAPS_OBJECT_IOTHREAD);
DO_TEST("iothreads-ids-partial", QEMU_CAPS_OBJECT_IOTHREAD);
qemu: Fix qemu startup check for QEMU_CAPS_OBJECT_IOTHREAD https://bugzilla.redhat.com/show_bug.cgi?id=1249981 When qemuDomainPinIOThread was added in commit id 'fb562614', a check for the IOThread capability was not needed since a check for iothreadpids covered the condition where the support for IOThreads was not present. The iothreadpids array was only created if qemuProcessDetectIOThreadPIDs was able to query the monitor for IOThreads. It would only do that if the QEMU_CAPS_OBJECT_IOTHREAD capability was set. However, when iothreadids were added in commit id '8d4614a5' and the check for iothreadpids was replaced by a search through the iothreadids[] array for the matching iothread_id that left open the possibility that an iothreadids[] array was defined, but the entries essentially pointed to elements with only the 'iothread_id' defined leaving the 'thread_id' value of 0 and eventually the cpumap entry of NULL. This was because, the original IOThreads commit id '72edaae7' only checked if IOThreads were defined and if the emulator had the IOThreads capability, then IOThread objects were added at startup. The "capability failure" check was only done when a disk was assigned to an IOThread in qemuCheckIOThreads. This was because the initial implementation had no way to dynamically add IOThreads, but it was possible to dynamically add a disk to the domain. So the decision was if the domain supported it, then add the IOThread objects. Then if a disk with an IOThread defined was added, it could check the capability and fail to add if not there. This just meant the 'iothreads' value was essentially ignored. Eventually commit id 'a27ed6e7' allowed for the dynamic addition and deletion of IOThread objects. So it was no longer necessary to generate IOThread objects to dynamically attach a disk to. However, the startup and disk check code was not modified to reflect this. This patch will move the capability failure check to when IOThread objects are being added to the command line. Thus a domain that has IOThreads defined will not be started if the emulator doesn't support the capability. This means when qemuCheckIOThreads is called to add a disk, it's no longer necessary to check the capability. Instead the code can use the IOThreadFind call to indicate that the IOThread doesn't exist. Finally because it could be possible to have a domain running with the iothreadids[] defined prior to this change if libvirtd is restarted each having mostly empty elements, qemuProcessDetectIOThreadPIDs will check if there are niothreadids when the QEMU_CAPS_OBJECT_IOTHREAD capability check fails and remove the elements and array if it exists. With these changes in place, it turns out the cputune-numatune test was failing because the right bit wasn't set in the test. So used the opportunity to fix that and create a test that would expect to fail with some sort of iothreads defined and used, but not having the correct capability.
2015-10-15 16:30:40 +00:00
DO_TEST_FAILURE("iothreads-nocap", NONE);
DO_TEST("iothreads-disk", QEMU_CAPS_OBJECT_IOTHREAD);
DO_TEST("iothreads-disk-virtio-ccw", QEMU_CAPS_OBJECT_IOTHREAD,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST("iothreads-virtio-scsi-pci", QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_OBJECT_IOTHREAD,
QEMU_CAPS_VIRTIO_SCSI_IOTHREAD);
DO_TEST("iothreads-virtio-scsi-ccw", QEMU_CAPS_OBJECT_IOTHREAD,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI_IOTHREAD,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST("cpu-topology1", NONE);
DO_TEST("cpu-topology2", NONE);
DO_TEST("cpu-topology3", NONE);
DO_TEST("cpu-minimum1", QEMU_CAPS_KVM);
DO_TEST("cpu-minimum2", QEMU_CAPS_KVM);
DO_TEST("cpu-exact1", QEMU_CAPS_KVM);
DO_TEST("cpu-exact2", QEMU_CAPS_KVM);
DO_TEST("cpu-exact2-nofallback", QEMU_CAPS_KVM);
DO_TEST("cpu-fallback", QEMU_CAPS_KVM);
DO_TEST_FAILURE("cpu-nofallback", QEMU_CAPS_KVM);
DO_TEST("cpu-strict1", QEMU_CAPS_KVM);
DO_TEST("cpu-numa1", NONE);
DO_TEST("cpu-numa2", NONE);
DO_TEST("cpu-numa-no-memory-element", NONE);
DO_TEST_PARSE_ERROR("cpu-numa3", NONE);
DO_TEST_FAILURE("cpu-numa-disjoint", NONE);
DO_TEST("cpu-numa-disjoint", QEMU_CAPS_NUMA);
DO_TEST_FAILURE("cpu-numa-memshared", QEMU_CAPS_OBJECT_MEMORY_RAM);
DO_TEST_FAILURE("cpu-numa-memshared", NONE);
DO_TEST("cpu-host-model", NONE);
DO_TEST("cpu-host-model-vendor", NONE);
skipLegacyCPUs = true;
DO_TEST("cpu-host-model-fallback", NONE);
DO_TEST_FAILURE("cpu-host-model-nofallback", NONE);
skipLegacyCPUs = false;
DO_TEST("cpu-host-passthrough", QEMU_CAPS_KVM);
DO_TEST_FAILURE("cpu-host-passthrough", NONE);
DO_TEST_FAILURE("cpu-qemu-host-passthrough", QEMU_CAPS_KVM);
qemuTestSetHostCPU(driver.caps, cpuHaswell);
DO_TEST("cpu-Haswell", QEMU_CAPS_KVM);
DO_TEST("cpu-Haswell2", QEMU_CAPS_KVM);
DO_TEST("cpu-Haswell3", QEMU_CAPS_KVM);
DO_TEST("cpu-Haswell-noTSX", QEMU_CAPS_KVM);
DO_TEST("cpu-host-model-cmt", NONE);
qemuTestSetHostCPU(driver.caps, NULL);
DO_TEST("encrypted-disk", NONE);
DO_TEST("encrypted-disk-usage", NONE);
# ifdef HAVE_GNUTLS_CIPHER_ENCRYPT
DO_TEST("luks-disks", QEMU_CAPS_OBJECT_SECRET);
# else
DO_TEST_FAILURE("luks-disks", QEMU_CAPS_OBJECT_SECRET);
# endif
DO_TEST("memtune", NONE);
DO_TEST("memtune-unlimited", NONE);
DO_TEST("blkiotune", NONE);
DO_TEST("blkiotune-device", NONE);
DO_TEST("cputune", NONE);
DO_TEST("cputune-zero-shares", NONE);
DO_TEST_PARSE_ERROR("cputune-iothreadsched-toomuch", NONE);
DO_TEST_PARSE_ERROR("cputune-vcpusched-overlap", NONE);
DO_TEST("cputune-numatune",
QEMU_CAPS_KVM,
qemu: Fix qemu startup check for QEMU_CAPS_OBJECT_IOTHREAD https://bugzilla.redhat.com/show_bug.cgi?id=1249981 When qemuDomainPinIOThread was added in commit id 'fb562614', a check for the IOThread capability was not needed since a check for iothreadpids covered the condition where the support for IOThreads was not present. The iothreadpids array was only created if qemuProcessDetectIOThreadPIDs was able to query the monitor for IOThreads. It would only do that if the QEMU_CAPS_OBJECT_IOTHREAD capability was set. However, when iothreadids were added in commit id '8d4614a5' and the check for iothreadpids was replaced by a search through the iothreadids[] array for the matching iothread_id that left open the possibility that an iothreadids[] array was defined, but the entries essentially pointed to elements with only the 'iothread_id' defined leaving the 'thread_id' value of 0 and eventually the cpumap entry of NULL. This was because, the original IOThreads commit id '72edaae7' only checked if IOThreads were defined and if the emulator had the IOThreads capability, then IOThread objects were added at startup. The "capability failure" check was only done when a disk was assigned to an IOThread in qemuCheckIOThreads. This was because the initial implementation had no way to dynamically add IOThreads, but it was possible to dynamically add a disk to the domain. So the decision was if the domain supported it, then add the IOThread objects. Then if a disk with an IOThread defined was added, it could check the capability and fail to add if not there. This just meant the 'iothreads' value was essentially ignored. Eventually commit id 'a27ed6e7' allowed for the dynamic addition and deletion of IOThread objects. So it was no longer necessary to generate IOThread objects to dynamically attach a disk to. However, the startup and disk check code was not modified to reflect this. This patch will move the capability failure check to when IOThread objects are being added to the command line. Thus a domain that has IOThreads defined will not be started if the emulator doesn't support the capability. This means when qemuCheckIOThreads is called to add a disk, it's no longer necessary to check the capability. Instead the code can use the IOThreadFind call to indicate that the IOThread doesn't exist. Finally because it could be possible to have a domain running with the iothreadids[] defined prior to this change if libvirtd is restarted each having mostly empty elements, qemuProcessDetectIOThreadPIDs will check if there are niothreadids when the QEMU_CAPS_OBJECT_IOTHREAD capability check fails and remove the elements and array if it exists. With these changes in place, it turns out the cputune-numatune test was failing because the right bit wasn't set in the test. So used the opportunity to fix that and create a test that would expect to fail with some sort of iothreads defined and used, but not having the correct capability.
2015-10-15 16:30:40 +00:00
QEMU_CAPS_OBJECT_IOTHREAD,
QEMU_CAPS_OBJECT_MEMORY_RAM,
QEMU_CAPS_OBJECT_MEMORY_FILE);
DO_TEST("numatune-memory", NONE);
DO_TEST_PARSE_ERROR("numatune-memory-invalid-nodeset", NONE);
DO_TEST_LINUX("numatune-memnode", QEMU_CAPS_NUMA,
QEMU_CAPS_OBJECT_MEMORY_RAM);
DO_TEST_FAILURE("numatune-memnode", NONE);
DO_TEST_LINUX("numatune-memnode-no-memory", QEMU_CAPS_NUMA,
QEMU_CAPS_OBJECT_MEMORY_RAM);
DO_TEST_FAILURE("numatune-memnode-no-memory", NONE);
DO_TEST("numatune-auto-nodeset-invalid", NONE);
DO_TEST("numatune-auto-prefer", QEMU_CAPS_OBJECT_MEMORY_RAM,
QEMU_CAPS_OBJECT_MEMORY_FILE);
DO_TEST_FAILURE("numatune-static-nodeset-exceed-hostnode",
QEMU_CAPS_OBJECT_MEMORY_RAM);
DO_TEST_PARSE_ERROR("numatune-memnode-nocpu", NONE);
DO_TEST_PARSE_ERROR("numatune-memnodes-problematic", NONE);
DO_TEST("numad", NONE);
DO_TEST("numad-auto-vcpu-static-numatune", NONE);
DO_TEST_PARSE_ERROR("numad-auto-vcpu-static-numatune-no-nodeset", NONE);
DO_TEST("numad-auto-memory-vcpu-cpuset", NONE);
DO_TEST("numad-auto-memory-vcpu-no-cpuset-and-placement", NONE);
DO_TEST("numad-static-memory-auto-vcpu", NONE);
DO_TEST("blkdeviotune",
QEMU_CAPS_DRIVE_IOTUNE);
DO_TEST("blkdeviotune-max",
QEMU_CAPS_DRIVE_IOTUNE,
QEMU_CAPS_DRIVE_IOTUNE_MAX);
DO_TEST("blkdeviotune-max-length",
QEMU_CAPS_DRIVE_IOTUNE,
QEMU_CAPS_DRIVE_IOTUNE_MAX,
QEMU_CAPS_DRIVE_IOTUNE_MAX_LENGTH);
DO_TEST("multifunction-pci-device",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_SCSI_LSI);
DO_TEST("monitor-json",
QEMU_CAPS_CHARDEV, QEMU_CAPS_MONITOR_JSON, QEMU_CAPS_NODEFCONFIG);
DO_TEST("no-shutdown",
QEMU_CAPS_CHARDEV, QEMU_CAPS_MONITOR_JSON, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_NO_SHUTDOWN);
DO_TEST("seclabel-dynamic", NONE);
DO_TEST("seclabel-dynamic-baselabel", NONE);
DO_TEST("seclabel-dynamic-override", NONE);
DO_TEST("seclabel-dynamic-labelskip", NONE);
DO_TEST("seclabel-dynamic-relabel", NONE);
DO_TEST("seclabel-static", NONE);
DO_TEST("seclabel-static-relabel", NONE);
DO_TEST("seclabel-static-labelskip", NONE);
DO_TEST("seclabel-none", NONE);
DO_TEST("seclabel-dac-none", NONE);
DO_TEST_PARSE_ERROR("seclabel-multiple", NONE);
DO_TEST_PARSE_ERROR("seclabel-device-duplicates", NONE);
DO_TEST("pseries-basic",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("pseries-vio",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("pseries-usb-default",
QEMU_CAPS_CHARDEV,
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_PIIX3_USB_UHCI,
QEMU_CAPS_PCI_OHCI, QEMU_CAPS_PCI_MULTIFUNCTION);
DO_TEST("pseries-usb-multi",
QEMU_CAPS_CHARDEV,
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_PIIX3_USB_UHCI,
QEMU_CAPS_PCI_OHCI, QEMU_CAPS_PCI_MULTIFUNCTION);
DO_TEST("pseries-vio-user-assigned",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST_PARSE_ERROR("pseries-vio-address-clash",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("pseries-nvram", QEMU_CAPS_DEVICE_NVRAM);
DO_TEST("pseries-usb-kbd", QEMU_CAPS_PCI_OHCI,
QEMU_CAPS_DEVICE_USB_KBD, QEMU_CAPS_CHARDEV,
QEMU_CAPS_NODEFCONFIG);
DO_TEST("pseries-cpu-exact", QEMU_CAPS_CHARDEV,
QEMU_CAPS_NODEFCONFIG);
qemuTestSetHostArch(driver.caps, VIR_ARCH_PPC64);
DO_TEST("pseries-cpu-compat", QEMU_CAPS_KVM,
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("pseries-cpu-le", QEMU_CAPS_KVM,
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
qemuTestSetHostArch(driver.caps, VIR_ARCH_NONE);
DO_TEST("pseries-panic-missing",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("pseries-panic-no-address",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST_FAILURE("pseries-panic-address",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG);
DO_TEST("disk-ide-drive-split",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_IDE_CD);
DO_TEST("disk-ide-wwn",
QEMU_CAPS_IDE_CD,
QEMU_CAPS_DRIVE_SERIAL, QEMU_CAPS_IDE_DRIVE_WWN);
DO_TEST("disk-geometry", NONE);
DO_TEST("disk-blockio",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_IDE_CD, QEMU_CAPS_BLOCKIO);
DO_TEST("video-device-pciaddr-default",
QEMU_CAPS_KVM, QEMU_CAPS_VNC,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_DEVICE_PCI_BRIDGE);
DO_TEST("video-vga-nodevice", QEMU_CAPS_DEVICE_VGA);
DO_TEST("video-vga-device", QEMU_CAPS_DEVICE_VGA,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY);
DO_TEST("video-vga-device-vgamem", QEMU_CAPS_DEVICE_VGA,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY, QEMU_CAPS_VGA_VGAMEM);
DO_TEST("video-qxl-nodevice", QEMU_CAPS_DEVICE_QXL);
DO_TEST("video-qxl-device",
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY);
DO_TEST("video-qxl-device-vgamem",
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_QXL_VGAMEM);
DO_TEST("video-qxl-sec-device",
QEMU_CAPS_DEVICE_QXL, QEMU_CAPS_DEVICE_VIDEO_PRIMARY);
DO_TEST("video-qxl-sec-device-vgamem",
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_QXL_VGAMEM);
DO_TEST("video-qxl-heads",
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_QXL_MAX_OUTPUTS);
DO_TEST("video-qxl-noheads",
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_QXL_MAX_OUTPUTS);
DO_TEST("video-virtio-gpu-device",
QEMU_CAPS_DEVICE_VIRTIO_GPU,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY);
DO_TEST("video-virtio-gpu-virgl",
QEMU_CAPS_DEVICE_VIRTIO_GPU,
QEMU_CAPS_VIRTIO_GPU_VIRGL,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY);
DO_TEST("video-virtio-gpu-spice-gl",
QEMU_CAPS_DEVICE_VIRTIO_GPU,
QEMU_CAPS_VIRTIO_GPU_VIRGL,
QEMU_CAPS_SPICE,
QEMU_CAPS_SPICE_GL,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY);
DO_TEST("video-virtio-gpu-secondary",
QEMU_CAPS_DEVICE_VIRTIO_GPU,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY);
DO_TEST("video-virtio-vga",
QEMU_CAPS_DEVICE_VIRTIO_GPU,
QEMU_CAPS_DEVICE_VIRTIO_VGA,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY);
DO_TEST_PARSE_ERROR("video-invalid", NONE);
DO_TEST("virtio-rng-default", QEMU_CAPS_DEVICE_VIRTIO_RNG,
QEMU_CAPS_OBJECT_RNG_RANDOM);
DO_TEST("virtio-rng-random", QEMU_CAPS_DEVICE_VIRTIO_RNG,
QEMU_CAPS_OBJECT_RNG_RANDOM);
DO_TEST("virtio-rng-egd", QEMU_CAPS_DEVICE_VIRTIO_RNG,
QEMU_CAPS_OBJECT_RNG_EGD);
DO_TEST("virtio-rng-multiple", QEMU_CAPS_DEVICE_VIRTIO_RNG,
QEMU_CAPS_OBJECT_RNG_EGD, QEMU_CAPS_OBJECT_RNG_RANDOM);
DO_TEST_PARSE_ERROR("virtio-rng-egd-crash",
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_EGD);
DO_TEST("virtio-rng-ccw",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_BOOTINDEX, QEMU_CAPS_VIRTIO_CCW,
QEMU_CAPS_VIRTIO_S390, QEMU_CAPS_DEVICE_VIRTIO_RNG,
QEMU_CAPS_OBJECT_RNG_RANDOM);
qemu: remove test for allowing ide controller in s390, rename usb tests Back in 2013, commit 877bc089 added in some tests that made sure no error was generated on a domain definition that had an automatically added usb controller if that domain didn't have a PCI bus to attach the usb controller to. This was done because, at that time, libvirt was automatically adding a usb controller to *any* domain definition that didn't have one. Along with permitting the controller, two s390-specific tests were added to ensure this behavior was maintained - one with <controller type='usb' model='none'/> and another (called "s390-piix-controllers") that had both usb and ide controllers, but nothing attached to them. Then in February of this year, commit 09ab9dcc eliminated the annoying auto-adding of a usb device for s390 and s390x machines, stating: "Since s390 does not support usb the default creation of a usb controller for a domain should not occur." Although, as verified here, the s390 doesn't support usb, and usb controllers aren't currently added to s390 domain definitions automatically, there are likely still some domain definitions in the wild that have a usb controller (which was added *by libvirt*, not by the user), so we will keep the tests verifying that behavior for now. But this patch changes the names of the tests to reflect that they don't actually contain a valid s390 config; this way future developers won't propagate the incorrect idea that an s390 virtual machine can have a USB (or IDE) bus. In the case of the IDE controller, though, libvirt has never automatically added an IDE controller unless a user added an IDE disk (which itself would have caused an error), and we specifically *do* want to begin generating an error when someone tries to add an IDE controller to a domain that can't support one. For that reason, while renaming the sz390-piix-controllers patch, this patch removes the <controller type='ide'...> from it (otherwise the upcoming patch would break make check)
2015-05-05 17:09:42 +00:00
DO_TEST("s390-allow-bogus-usb-none",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_BOOTINDEX, QEMU_CAPS_VIRTIO_S390,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM);
qemu: remove test for allowing ide controller in s390, rename usb tests Back in 2013, commit 877bc089 added in some tests that made sure no error was generated on a domain definition that had an automatically added usb controller if that domain didn't have a PCI bus to attach the usb controller to. This was done because, at that time, libvirt was automatically adding a usb controller to *any* domain definition that didn't have one. Along with permitting the controller, two s390-specific tests were added to ensure this behavior was maintained - one with <controller type='usb' model='none'/> and another (called "s390-piix-controllers") that had both usb and ide controllers, but nothing attached to them. Then in February of this year, commit 09ab9dcc eliminated the annoying auto-adding of a usb device for s390 and s390x machines, stating: "Since s390 does not support usb the default creation of a usb controller for a domain should not occur." Although, as verified here, the s390 doesn't support usb, and usb controllers aren't currently added to s390 domain definitions automatically, there are likely still some domain definitions in the wild that have a usb controller (which was added *by libvirt*, not by the user), so we will keep the tests verifying that behavior for now. But this patch changes the names of the tests to reflect that they don't actually contain a valid s390 config; this way future developers won't propagate the incorrect idea that an s390 virtual machine can have a USB (or IDE) bus. In the case of the IDE controller, though, libvirt has never automatically added an IDE controller unless a user added an IDE disk (which itself would have caused an error), and we specifically *do* want to begin generating an error when someone tries to add an IDE controller to a domain that can't support one. For that reason, while renaming the sz390-piix-controllers patch, this patch removes the <controller type='ide'...> from it (otherwise the upcoming patch would break make check)
2015-05-05 17:09:42 +00:00
DO_TEST("s390-allow-bogus-usb-controller",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_BOOTINDEX, QEMU_CAPS_VIRTIO_S390,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM);
DO_TEST("s390-panic-no-address",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("s390-panic-address",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST("s390-panic-missing",
QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST("ppc-dtb", QEMU_CAPS_KVM, QEMU_CAPS_DTB);
DO_TEST("ppce500-serial", QEMU_CAPS_KVM, QEMU_CAPS_CHARDEV);
DO_TEST("tpm-passthrough",
QEMU_CAPS_DEVICE_TPM_PASSTHROUGH, QEMU_CAPS_DEVICE_TPM_TIS);
DO_TEST_PARSE_ERROR("tpm-no-backend-invalid",
QEMU_CAPS_DEVICE_TPM_PASSTHROUGH, QEMU_CAPS_DEVICE_TPM_TIS);
conf: more useful error message when pci function is out of range If a pci address had a function number out of range, the error message would be: Insufficient specification for PCI address which is logged by virDevicePCIAddressParseXML() after virDevicePCIAddressIsValid returns a failure. This patch enhances virDevicePCIAddressIsValid() to optionally report the error itself (since it is the place that decides which part of the address is "invalid"), and uses that feature when calling from virDevicePCIAddressParseXML(), so that the error will be more useful, e.g.: Invalid PCI address function=0x8, must be <= 7 Previously, virDevicePCIAddressIsValid didn't check for the theoretical limits of domain or bus, only for slot or function. While adding log messages, we also correct that ommission. (The RNG for PCI addresses already enforces this limit, which by the way means that we can't add any negative tests for this - as far as I know our domainschematest has no provisions for passing XML that is supposed to fail). Note that virDevicePCIAddressIsValid() can only check against the absolute maximum attribute values for *any* possible PCI controller, not for the actual maximums of the specific controller that this device is attaching to; fortunately there is later more specific validation for guest-side PCI addresses when building the set of assigned PCI addresses. For host-side PCI addresses (e.g. for <hostdev> and for network device pools), we rely on the error that will be logged when it is found that the device doesn't actually exist. This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1004596
2015-07-22 15:59:00 +00:00
DO_TEST_PARSE_ERROR("pci-domain-invalid", NONE);
DO_TEST_PARSE_ERROR("pci-bus-invalid", NONE);
DO_TEST_PARSE_ERROR("pci-slot-invalid", NONE);
DO_TEST_PARSE_ERROR("pci-function-invalid", NONE);
conf: more useful error message when pci function is out of range If a pci address had a function number out of range, the error message would be: Insufficient specification for PCI address which is logged by virDevicePCIAddressParseXML() after virDevicePCIAddressIsValid returns a failure. This patch enhances virDevicePCIAddressIsValid() to optionally report the error itself (since it is the place that decides which part of the address is "invalid"), and uses that feature when calling from virDevicePCIAddressParseXML(), so that the error will be more useful, e.g.: Invalid PCI address function=0x8, must be <= 7 Previously, virDevicePCIAddressIsValid didn't check for the theoretical limits of domain or bus, only for slot or function. While adding log messages, we also correct that ommission. (The RNG for PCI addresses already enforces this limit, which by the way means that we can't add any negative tests for this - as far as I know our domainschematest has no provisions for passing XML that is supposed to fail). Note that virDevicePCIAddressIsValid() can only check against the absolute maximum attribute values for *any* possible PCI controller, not for the actual maximums of the specific controller that this device is attaching to; fortunately there is later more specific validation for guest-side PCI addresses when building the set of assigned PCI addresses. For host-side PCI addresses (e.g. for <hostdev> and for network device pools), we rely on the error that will be logged when it is found that the device doesn't actually exist. This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1004596
2015-07-22 15:59:00 +00:00
DO_TEST("pci-autoadd-addr", QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("pci-autoadd-idx", QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("pci-autofill-addr", QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("pci-many",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_CIRRUS_VGA);
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
DO_TEST("pci-bridge-many-disks",
QEMU_CAPS_DEVICE_PCI_BRIDGE);
DO_TEST("pcie-root",
qemu: fix handling of default/implicit devices for q35 This patch adds in special handling for a few devices that need to be treated differently for q35 domains: usb - there is no implicit/default usb controller for the q35 machinetype. This is done because normally the default usb controller is added to a domain by just adding "-usb" to the qemu commandline, and it's assumed that this will add a single piix3 usb1 controller at slot 1 function 2. That's not what happens when the machinetype is q35, though. Instead, adding -usb to the commandline adds 3 usb (version 2) controllers to the domain at slot 0x1D.{1,2,7}. Rather than having <controller type='usb' index='0'/> translate into 3 separate devices on the PCI bus, it's cleaner to not automatically add a default usb device; one can always be added explicitly if desired. Or we may decide that on q35 machines, 3 usb controllers will be automatically added when none is given. But for this initial commit, at least we aren't locking ourselves into something we later won't want. video - qemu always initializes the primary video device immediately after any integrated devices for the machinetype. Unless instructed otherwise (by using "-device vga..." instead of "-vga" which libvirt uses in many cases to work around deficiencies and bugs in various qemu versions) qemu will always pick the first unused slot. In the case of the "pc" machinetype and its derivatives, this is always slot 2, but on q35 machinetypes, the first free slot is slot 1 (since the q35's integrated peripheral devices are placed in other slots, e.g. slot 0x1f). In order to make the PCI address of the video device predictable, that slot (1 or 2, depending on machinetype) is reserved even when no video device has been specified. sata - a q35 machine always has a sata controller implicitly added at slot 0x1F, function 2. There is no way to avoid this controller, so we always add it. Note that the xml2xml tests for the pcie-root and q35 cases were changed to use DO_TEST_DIFFERENT() so that we can check for the sata controller being automatically added. This is especially important because we can't check for it in the xml2argv output (it has no effect on that output since it's an implicit device). ide - q35 has no ide controllers. isa and smbus controllers - these two are always present in a q35 (at slot 0x1F functions 0 and 3) but we have no way of modelling them in our config. We do need to reserve those functions so that the user doesn't attempt to put anything else there though. (note that the "pc" machine type also has an ISA controller, which we also ignore).
2013-08-02 08:55:55 +00:00
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_PCI_BRIDGE,
qemu: add dmi-to-pci-bridge controller This PCI controller, named "dmi-to-pci-bridge" in the libvirt config, and implemented with qemu's "i82801b11-bridge" device, connects to a PCI Express slot (e.g. one of the slots provided by the pcie-root controller, aka "pcie.0" on the qemu commandline), and provides 31 *non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31. Any time a machine is defined which has a pcie-root controller (i.e. any q35-based machinetype), libvirt will automatically add a dmi-to-pci-bridge controller if one doesn't exist, and also add a pci-bridge controller. The reasoning here is that any useful domain will have either an immediate (startup time) or eventual (subsequent hot-plug) need for a standard PCI slot; since the pcie-root controller only provides PCIe slots, we need to connect a dmi-to-pci-bridge controller to it in order to get a non-hot-plug PCI slot that we can then use to connect a pci-bridge - the slots provided by the pci-bridge will be both standard PCI and hot-pluggable. Since pci-bridge devices themselves can not be hot-plugged into a running system (although you can hot-plug other devices into a pci-bridge's slots), any new pci-bridge controller that is added can (and will) be plugged into the dmi-to-pci-bridge as long as it has empty slots available. This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST" to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit the automatically added dmi-to-pci-bridge and pci-bridge devices, and the "after" xml can include it - this way we are testing if libvirt is properly adding these devices.
2013-07-31 01:37:32 +00:00
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE);
DO_TEST("q35",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
qemu: add dmi-to-pci-bridge controller This PCI controller, named "dmi-to-pci-bridge" in the libvirt config, and implemented with qemu's "i82801b11-bridge" device, connects to a PCI Express slot (e.g. one of the slots provided by the pcie-root controller, aka "pcie.0" on the qemu commandline), and provides 31 *non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31. Any time a machine is defined which has a pcie-root controller (i.e. any q35-based machinetype), libvirt will automatically add a dmi-to-pci-bridge controller if one doesn't exist, and also add a pci-bridge controller. The reasoning here is that any useful domain will have either an immediate (startup time) or eventual (subsequent hot-plug) need for a standard PCI slot; since the pcie-root controller only provides PCIe slots, we need to connect a dmi-to-pci-bridge controller to it in order to get a non-hot-plug PCI slot that we can then use to connect a pci-bridge - the slots provided by the pci-bridge will be both standard PCI and hot-pluggable. Since pci-bridge devices themselves can not be hot-plugged into a running system (although you can hot-plug other devices into a pci-bridge's slots), any new pci-bridge controller that is added can (and will) be plugged into the dmi-to-pci-bridge as long as it has empty slots available. This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST" to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit the automatically added dmi-to-pci-bridge and pci-bridge devices, and the "after" xml can include it - this way we are testing if libvirt is properly adding these devices.
2013-07-31 01:37:32 +00:00
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL);
DO_TEST_PARSE_ERROR("q35-dmi-bad-address1",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420);
DO_TEST_PARSE_ERROR("q35-dmi-bad-address2",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420);
DO_TEST("q35-pm-disable",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE, QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PIIX_DISABLE_S3, QEMU_CAPS_PIIX_DISABLE_S4,
QEMU_CAPS_ICH9_DISABLE_S3, QEMU_CAPS_ICH9_DISABLE_S4);
DO_TEST("q35-pm-disable-fallback",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE, QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PIIX_DISABLE_S3, QEMU_CAPS_PIIX_DISABLE_S4);
DO_TEST("q35-usb2",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("q35-usb2-multi",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("q35-usb2-reorder",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("pcie-root-port",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("autoindex",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_X3130_UPSTREAM,
QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_NEC_USB_XHCI);
/* Make sure the user can always override libvirt's default device
* placement policy by providing an explicit PCI address */
DO_TEST("q35-pci-force-address",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_HDA_DUPLEX);
DO_TEST_PARSE_ERROR("q35-wrong-root",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL);
DO_TEST_PARSE_ERROR("440fx-wrong-root", NONE);
DO_TEST_PARSE_ERROR("pcie-root-port-too-many",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("pcie-switch-upstream-port",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_X3130_UPSTREAM,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("pcie-switch-downstream-port",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_X3130_UPSTREAM,
QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL);
DO_TEST("pci-expander-bus",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PXB);
DO_TEST_PARSE_ERROR("pci-expander-bus-bad-node",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PXB);
DO_TEST_PARSE_ERROR("pci-expander-bus-bad-machine",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PXB);
DO_TEST_PARSE_ERROR("pci-expander-bus-bad-bus",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_PXB);
DO_TEST("pcie-expander-bus",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_X3130_UPSTREAM,
QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
QEMU_CAPS_DEVICE_PXB_PCIE);
DO_TEST_PARSE_ERROR("pcie-expander-bus-bad-machine",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_X3130_UPSTREAM,
QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
QEMU_CAPS_DEVICE_PXB_PCIE);
DO_TEST_PARSE_ERROR("pcie-expander-bus-bad-bus",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_PXB_PCIE);
DO_TEST("hostdev-scsi-lsi",
qemu: Build qemu command line for scsi host device Except the scsi host device's controller is "lsilogic", mapping between the libvirt attributes and scsi-generic properties is: libvirt qemu ----------------------------------------- controller bus ($libvirt_controller.0) bus channel target scsi-id unit lun For scsi host device with "lsilogic" controller, the mapping is: ('target (libvirt)' must be 0, as it's not used; 'unit (libvirt) must <= 7). libvirt qemu ---------------------------------------------------------- controller && bus bus ($libvirt_controller.$libvirt_bus) unit scsi-id It's not good to hardcode/hard-check limits of these attributes, and even worse, these limits are not documented, one has to find out by either testing or reading the qemu code, I'm looking forward to qemu expose limits like these one day). For example, exposing "max_target", "max_lun" for megasas: static const struct SCSIBusInfo megasas_scsi_info = { .tcq = true, .max_target = MFI_MAX_LD, .max_lun = 255, .transfer_data = megasas_xfer_complete, .get_sg_list = megasas_get_sg_list, .complete = megasas_command_complete, .cancel = megasas_command_cancel, }; Example of the qemu command line (lsilogic controller): -drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \ -device scsi-generic,bus=scsi0.0,scsi-id=8,\ drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0 Example of the qemu command line (virtio-scsi controller): -drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \ -device scsi-generic,bus=scsi0.0,channel=0,scsi-id=128,lun=128,\ drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0 Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com> Signed-off-by: Osier Yang <jyang@redhat.com>
2013-05-03 18:07:23 +00:00
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST("hostdev-scsi-virtio-scsi",
qemu: Build qemu command line for scsi host device Except the scsi host device's controller is "lsilogic", mapping between the libvirt attributes and scsi-generic properties is: libvirt qemu ----------------------------------------- controller bus ($libvirt_controller.0) bus channel target scsi-id unit lun For scsi host device with "lsilogic" controller, the mapping is: ('target (libvirt)' must be 0, as it's not used; 'unit (libvirt) must <= 7). libvirt qemu ---------------------------------------------------------- controller && bus bus ($libvirt_controller.$libvirt_bus) unit scsi-id It's not good to hardcode/hard-check limits of these attributes, and even worse, these limits are not documented, one has to find out by either testing or reading the qemu code, I'm looking forward to qemu expose limits like these one day). For example, exposing "max_target", "max_lun" for megasas: static const struct SCSIBusInfo megasas_scsi_info = { .tcq = true, .max_target = MFI_MAX_LD, .max_lun = 255, .transfer_data = megasas_xfer_complete, .get_sg_list = megasas_get_sg_list, .complete = megasas_command_complete, .cancel = megasas_command_cancel, }; Example of the qemu command line (lsilogic controller): -drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \ -device scsi-generic,bus=scsi0.0,scsi-id=8,\ drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0 Example of the qemu command line (virtio-scsi controller): -drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \ -device scsi-generic,bus=scsi0.0,channel=0,scsi-id=128,lun=128,\ drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0 Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com> Signed-off-by: Osier Yang <jyang@redhat.com>
2013-05-03 18:07:23 +00:00
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST("hostdev-scsi-readonly",
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST("hostdev-scsi-virtio-scsi",
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC,
QEMU_CAPS_DEVICE_SCSI_GENERIC_BOOTINDEX);
DO_TEST("hostdev-scsi-lsi-iscsi",
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST("hostdev-scsi-lsi-iscsi-auth",
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST("hostdev-scsi-virtio-iscsi",
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
DO_TEST("hostdev-scsi-virtio-iscsi-auth",
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_DEVICE_SCSI_GENERIC);
qemu: Build qemu command line for scsi host device Except the scsi host device's controller is "lsilogic", mapping between the libvirt attributes and scsi-generic properties is: libvirt qemu ----------------------------------------- controller bus ($libvirt_controller.0) bus channel target scsi-id unit lun For scsi host device with "lsilogic" controller, the mapping is: ('target (libvirt)' must be 0, as it's not used; 'unit (libvirt) must <= 7). libvirt qemu ---------------------------------------------------------- controller && bus bus ($libvirt_controller.$libvirt_bus) unit scsi-id It's not good to hardcode/hard-check limits of these attributes, and even worse, these limits are not documented, one has to find out by either testing or reading the qemu code, I'm looking forward to qemu expose limits like these one day). For example, exposing "max_target", "max_lun" for megasas: static const struct SCSIBusInfo megasas_scsi_info = { .tcq = true, .max_target = MFI_MAX_LD, .max_lun = 255, .transfer_data = megasas_xfer_complete, .get_sg_list = megasas_get_sg_list, .complete = megasas_command_complete, .cancel = megasas_command_cancel, }; Example of the qemu command line (lsilogic controller): -drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \ -device scsi-generic,bus=scsi0.0,scsi-id=8,\ drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0 Example of the qemu command line (virtio-scsi controller): -drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \ -device scsi-generic,bus=scsi0.0,channel=0,scsi-id=128,lun=128,\ drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0 Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com> Signed-off-by: Osier Yang <jyang@redhat.com>
2013-05-03 18:07:23 +00:00
DO_TEST("mlock-on", QEMU_CAPS_REALTIME_MLOCK);
DO_TEST_FAILURE("mlock-on", NONE);
DO_TEST("mlock-off", QEMU_CAPS_REALTIME_MLOCK);
DO_TEST("mlock-unsupported", NONE);
DO_TEST_PARSE_ERROR("pci-bridge-negative-index-invalid",
QEMU_CAPS_DEVICE_PCI_BRIDGE);
DO_TEST_PARSE_ERROR("pci-bridge-duplicate-index",
QEMU_CAPS_DEVICE_PCI_BRIDGE);
DO_TEST_PARSE_ERROR("pci-root-nonzero-index",
QEMU_CAPS_DEVICE_PCI_BRIDGE);
DO_TEST_PARSE_ERROR("pci-root-address",
QEMU_CAPS_DEVICE_PCI_BRIDGE);
DO_TEST("hotplug-base",
QEMU_CAPS_KVM, QEMU_CAPS_VIRTIO_SCSI);
DO_TEST("pcihole64", QEMU_CAPS_I440FX_PCI_HOLE64_SIZE);
DO_TEST_FAILURE("pcihole64-none", NONE);
DO_TEST("pcihole64-q35",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
QEMU_CAPS_ICH9_AHCI,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL,
QEMU_CAPS_Q35_PCI_HOLE64_SIZE);
DO_TEST("arm-vexpressa9-nodevs",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DTB);
DO_TEST("arm-vexpressa9-basic",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DTB);
DO_TEST("arm-vexpressa9-virtio",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DTB,
QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM);
DO_TEST("arm-virt-virtio",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DTB,
QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM);
DO_TEST("aarch64-virt-virtio",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DTB,
QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM);
/* Demonstrates the virtio-pci default... namely that there isn't any!
q35 style PCI controllers will be added if the binary supports it,
but virtio-mmio is always used unless PCI addresses are manually
specified. */
DO_TEST("aarch64-virtio-pci-default",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DTB,
QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM,
QEMU_CAPS_OBJECT_GPEX, QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE);
DO_TEST("aarch64-virt-2.6-virtio-pci-default",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DTB,
QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM,
QEMU_CAPS_OBJECT_GPEX, QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE);
/* Example of using virtio-pci with no explicit PCI controller
but with manual PCI addresses */
DO_TEST("aarch64-virtio-pci-manual-addresses",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DTB,
QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM,
QEMU_CAPS_OBJECT_GPEX, QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE, QEMU_CAPS_VIRTIO_SCSI);
qemu: map "virtio" video model to "virt" machtype correctly (arm/aarch64) Most of QEMU's PCI display device models, such as: libvirt video/model/@type QEMU -device ------------------------- ------------ cirrus cirrus-vga vga VGA qxl qxl-vga virtio virtio-vga come with a linear framebuffer (sometimes called "VGA compatibility framebuffer"). This linear framebuffer lives in one of the PCI device's MMIO BARs, and allows guest code (primarily: firmware drivers, and non-accelerated OS drivers) to display graphics with direct memory access. Due to architectural reasons on aarch64/KVM hosts, this kind of framebuffer doesn't / can't work in qemu-system-(arm|aarch64) -M virt machines. Cache coherency issues guarantee a corrupted / unusable display. The problem has been researched by several people, including kvm-arm maintainers, and it's been decided that the best way (practically the only way) to have boot time graphics for such guests is to consolidate on QEMU's "virtio-gpu-pci" device. >From <https://bugzilla.redhat.com/show_bug.cgi?id=1195176>, libvirt supports <devices> <video> <model type='virtio'/> </video> </devices> but libvirt unconditionally maps @type='virtio' to QEMU's "virtio-vga" device model. (See the qemuBuildDeviceVideoStr() function and the "qemuDeviceVideo" enum impl.) According to the above, this is not right for the "virt" machine type; the qemu-system-(arm|aarch64) binaries don't even recognize the "virtio-vga" device model (justifiedly). Whereas "virtio-gpu-pci", which is a pure virtio device without a compatibility framebuffer, is available, and works fine. (The ArmVirtQemu ("AAVMF") platform of edk2 -- that is, the UEFI firmware for "virt" -- supports "virtio-gpu-pci", as of upstream commit 3ef3209d3028. See <https://tianocore.acgmultimedia.com/show_bug.cgi?id=66>.) Override the default mapping of "virtio", from "virtio-vga" to "virtio-gpu-pci", if qemuDomainMachineIsVirt() evaluates to true. Cc: Andrea Bolognani <abologna@redhat.com> Cc: Drew Jones <drjones@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Martin Kletzander <mkletzan@redhat.com> Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com> Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372901 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Martin Kletzander <mkletzan@redhat.com>
2016-09-16 07:30:23 +00:00
DO_TEST("aarch64-video-virtio-gpu-pci",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_OBJECT_GPEX,
QEMU_CAPS_DEVICE_PCI_BRIDGE, QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_VIRTIO_GPU, QEMU_CAPS_BOOTINDEX);
DO_TEST("aarch64-aavmf-virtio-mmio",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DTB,
QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_DEVICE_VIRTIO_RNG, QEMU_CAPS_OBJECT_RNG_RANDOM);
DO_TEST("aarch64-virt-default-nic",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_DEVICE_VIRTIO_MMIO);
qemuTestSetHostArch(driver.caps, VIR_ARCH_AARCH64);
DO_TEST("aarch64-cpu-passthrough",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_KVM);
DO_TEST_GIC("aarch64-gic-none", GIC_NONE,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT);
DO_TEST_GIC("aarch64-gic-none", GIC_NONE,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-none-v2", GIC_V2,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-none-v3", GIC_V3,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-none-both", GIC_BOTH,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-default", GIC_NONE,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT);
DO_TEST_GIC("aarch64-gic-default", GIC_NONE,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-default", GIC_V2,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-default", GIC_V3,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-default", GIC_BOTH,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-v2", GIC_NONE,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT);
DO_TEST_GIC("aarch64-gic-v2", GIC_NONE,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-v2", GIC_V2,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-v2", GIC_V3,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-v2", GIC_BOTH,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_FAILURE("aarch64-gic-v3",
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT);
DO_TEST_GIC("aarch64-gic-v3", GIC_NONE,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-v3", GIC_V2,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-v3", GIC_V3,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-v3", GIC_BOTH,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_FAILURE("aarch64-gic-host",
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT);
DO_TEST_GIC("aarch64-gic-host", GIC_NONE,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-host", GIC_V2,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-host", GIC_V3,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_GIC("aarch64-gic-host", GIC_BOTH,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_PARSE_ERROR("aarch64-gic-invalid",
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_FAILURE("aarch64-gic-not-virt",
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST_FAILURE("aarch64-gic-not-arm",
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
DO_TEST("aarch64-kvm-32-on-64",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_KVM, QEMU_CAPS_CPU_AARCH64_OFF);
DO_TEST_FAILURE("aarch64-kvm-32-on-64",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DEVICE_VIRTIO_MMIO,
QEMU_CAPS_KVM);
qemuTestSetHostArch(driver.caps, VIR_ARCH_NONE);
DO_TEST("kvm-pit-device", QEMU_CAPS_KVM_PIT_TICK_POLICY);
DO_TEST("kvm-pit-delay", QEMU_CAPS_NO_KVM_PIT);
DO_TEST("kvm-pit-device", QEMU_CAPS_NO_KVM_PIT,
QEMU_CAPS_KVM_PIT_TICK_POLICY);
DO_TEST("panic", QEMU_CAPS_DEVICE_PANIC,
QEMU_CAPS_NODEFCONFIG);
DO_TEST("panic-double", QEMU_CAPS_DEVICE_PANIC,
QEMU_CAPS_NODEFCONFIG);
DO_TEST("panic-no-address", QEMU_CAPS_DEVICE_PANIC,
QEMU_CAPS_NODEFCONFIG);
DO_TEST("fips-enabled", QEMU_CAPS_ENABLE_FIPS);
DO_TEST("shmem", QEMU_CAPS_DEVICE_IVSHMEM);
DO_TEST("shmem-plain-doorbell", QEMU_CAPS_DEVICE_IVSHMEM,
QEMU_CAPS_DEVICE_IVSHMEM_PLAIN,
QEMU_CAPS_DEVICE_IVSHMEM_DOORBELL);
DO_TEST_FAILURE("shmem", NONE);
DO_TEST_FAILURE("shmem-invalid-size",
QEMU_CAPS_DEVICE_IVSHMEM);
DO_TEST_FAILURE("shmem-invalid-address",
QEMU_CAPS_DEVICE_IVSHMEM);
DO_TEST_FAILURE("shmem-small-size",
QEMU_CAPS_DEVICE_IVSHMEM);
DO_TEST_PARSE_ERROR("shmem-msi-only", NONE);
DO_TEST("cpu-host-passthrough-features", QEMU_CAPS_KVM);
DO_TEST_FAILURE("memory-align-fail", NONE);
DO_TEST_FAILURE("memory-hotplug-nonuma", QEMU_CAPS_DEVICE_PC_DIMM);
DO_TEST_FAILURE("memory-hotplug", NONE);
DO_TEST("memory-hotplug", QEMU_CAPS_DEVICE_PC_DIMM, QEMU_CAPS_NUMA);
DO_TEST("memory-hotplug-dimm", QEMU_CAPS_DEVICE_PC_DIMM, QEMU_CAPS_NUMA,
QEMU_CAPS_OBJECT_MEMORY_RAM, QEMU_CAPS_OBJECT_MEMORY_FILE);
DO_TEST("memory-hotplug-dimm-addr", QEMU_CAPS_DEVICE_PC_DIMM, QEMU_CAPS_NUMA,
QEMU_CAPS_OBJECT_MEMORY_FILE);
DO_TEST("memory-hotplug-ppc64-nonuma", QEMU_CAPS_KVM, QEMU_CAPS_DEVICE_PC_DIMM, QEMU_CAPS_NUMA,
QEMU_CAPS_OBJECT_MEMORY_RAM, QEMU_CAPS_OBJECT_MEMORY_FILE);
DO_TEST("machine-aeskeywrap-on-caps",
QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_AES_KEY_WRAP,
QEMU_CAPS_DEA_KEY_WRAP,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-aeskeywrap-on-caps", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-aeskeywrap-on-caps", NONE);
DO_TEST("machine-aeskeywrap-on-cap",
QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_AES_KEY_WRAP,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-aeskeywrap-on-cap", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-aeskeywrap-on-cap", NONE);
DO_TEST("machine-aeskeywrap-off-caps",
QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_AES_KEY_WRAP, QEMU_CAPS_DEA_KEY_WRAP,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-aeskeywrap-off-caps", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-aeskeywrap-off-caps", NONE);
DO_TEST("machine-aeskeywrap-off-cap",
QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_AES_KEY_WRAP,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-aeskeywrap-off-cap", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-aeskeywrap-off-cap", NONE);
DO_TEST("machine-deakeywrap-on-caps",
QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_AES_KEY_WRAP, QEMU_CAPS_DEA_KEY_WRAP,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-deakeywrap-on-caps", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-deakeywrap-on-caps", NONE);
DO_TEST("machine-deakeywrap-on-cap",
QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_DEA_KEY_WRAP,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-deakeywrap-on-cap", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-deakeywrap-on-cap", NONE);
DO_TEST("machine-deakeywrap-off-caps",
QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_AES_KEY_WRAP, QEMU_CAPS_DEA_KEY_WRAP,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-deakeywrap-off-caps", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-deakeywrap-off-caps", NONE);
DO_TEST("machine-deakeywrap-off-cap",
QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_DEA_KEY_WRAP,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-deakeywrap-off-cap", QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST_FAILURE("machine-deakeywrap-off-cap", NONE);
DO_TEST("machine-keywrap-none-caps",
QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_AES_KEY_WRAP, QEMU_CAPS_DEA_KEY_WRAP,
QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST("machine-keywrap-none",
QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_VIRTIO_SCSI,
QEMU_CAPS_VIRTIO_CCW, QEMU_CAPS_VIRTIO_S390);
DO_TEST("qemu-ns-domain-ns0", NONE);
DO_TEST("qemu-ns-domain-commandline", NONE);
DO_TEST("qemu-ns-domain-commandline-ns0", NONE);
DO_TEST("qemu-ns-commandline", NONE);
DO_TEST("qemu-ns-commandline-ns0", NONE);
DO_TEST("qemu-ns-commandline-ns1", NONE);
DO_TEST("virtio-input", QEMU_CAPS_VIRTIO_KEYBOARD,
QEMU_CAPS_VIRTIO_MOUSE, QEMU_CAPS_VIRTIO_TABLET);
DO_TEST("virtio-input-passthrough", QEMU_CAPS_VIRTIO_INPUT_HOST);
DO_TEST("ppc64-usb-controller",
QEMU_CAPS_PCI_OHCI);
DO_TEST("ppc64-usb-controller-legacy",
QEMU_CAPS_PIIX3_USB_UHCI);
DO_TEST_PARSE_FLAGS_ERROR("missing-machine",
VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS,
NONE);
DO_TEST("name-escape", QEMU_CAPS_NAME_DEBUG_THREADS,
QEMU_CAPS_OBJECT_SECRET, QEMU_CAPS_CHARDEV, QEMU_CAPS_VNC,
QEMU_CAPS_NAME_GUEST, QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("debug-threads", QEMU_CAPS_NAME_DEBUG_THREADS);
DO_TEST("master-key", QEMU_CAPS_OBJECT_SECRET);
DO_TEST("usb-long-port-path", QEMU_CAPS_CHARDEV, QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_USB_HUB);
DO_TEST_PARSE_ERROR("usb-too-long-port-path-invalid",
QEMU_CAPS_CHARDEV,
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_USB_HUB);
DO_TEST("acpi-table", NONE);
DO_TEST("intel-iommu", QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE, QEMU_CAPS_DEVICE_INTEL_IOMMU);
DO_TEST("intel-iommu-machine", QEMU_CAPS_DEVICE_PCI_BRIDGE, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE, QEMU_CAPS_MACHINE_IOMMU);
DO_TEST("cpu-hotplug-startup", QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS);
qemuTestDriverFree(&driver);
return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE;
2007-07-18 21:34:22 +00:00
}
qemu: Utilize qemu secret objects for RBD auth/secret https://bugzilla.redhat.com/show_bug.cgi?id=1182074 If they're available and we need to pass secrets to qemu, then use the qemu domain secret object in order to pass the secrets for RBD volumes instead of passing the base64 encoded secret on the command line. The goal is to make AES secrets the default and have no user interaction required in order to allow using the AES mechanism. If the mechanism is not available, then fall back to the current plain mechanism using a base64 encoded secret. New APIs: qemu_domain.c: qemuDomainGetSecretAESAlias: Generate/return the secret object alias for an AES Secret Info type. This will be called from qemuDomainSecretAESSetup. qemuDomainSecretAESSetup: (private) This API handles the details of the generation of the AES secret and saves the pieces that need to be passed to qemu in order for the secret to be decrypted. The encrypted secret based upon the domain master key, an initialization vector (16 byte random value), and the stored secret. Finally, the requirement from qemu is the IV and encrypted secret are to be base64 encoded. qemu_command.c: qemuBuildSecretInfoProps: (private) Generate/return a JSON properties object for the AES secret to be used by both the command building and eventually the hotplug code in order to add the secret object. Code was designed so that in the future perhaps hotplug could use it if it made sense. qemuBuildObjectSecretCommandLine (private) Generate and add to the command line the -object secret for the secret. This will be required for the subsequent RBD reference to the object. qemuBuildDiskSecinfoCommandLine (private) Handle adding the AES secret object. Adjustments: qemu_domain.c: The qemuDomainSecretSetup was altered to call either the AES or Plain Setup functions based upon whether AES secrets are possible (we have the encryption API) or not, we have secrets, and of course if the protocol source is RBD. qemu_command.c: Adjust the qemuBuildRBDSecinfoURI API's in order to generate the specific command options for an AES secret, such as: -object secret,id=$alias,keyid=$masterKey,data=$base64encodedencrypted, format=base64 -drive file=rbd:pool/image:id=myname:auth_supported=cephx\;none:\ mon_host=mon1.example.org\:6321,password-secret=$alias,... where the 'id=' value is the secret object alias generated by concatenating the disk alias and "-aesKey0". The 'keyid= $masterKey' is the master key shared with qemu, and the -drive syntax will reference that alias as the 'password-secret'. For the -drive syntax, the 'id=myname' is kept to define the username, while the 'key=$base64 encoded secret' is removed. While according to the syntax described for qemu commit '60390a21' or as seen in the email archive: https://lists.gnu.org/archive/html/qemu-devel/2016-01/msg04083.html it is possible to pass a plaintext password via a file, the qemu commit 'ac1d8878' describes the more feature rich 'keyid=' option based upon the shared masterKey. Add tests for checking/comparing output. NB: For hotplug, since the hotplug code doesn't add command line arguments, passing the encoded secret directly to the monitor will suffice.
2016-04-11 15:26:14 +00:00
VIRT_TEST_MAIN_PRELOAD(mymain, abs_builddir "/.libs/qemuxml2argvmock.so",
abs_builddir "/.libs/virrandommock.so")
#else
int main(void)
{
return EXIT_AM_SKIP;
}
#endif /* WITH_QEMU */