libvirt/tests/qemuxml2argvdata/firmware-manual-bios.xml

<domain type='qemu'>
  <name>guest</name>
  <uuid>63840878-0deb-4095-97e6-fc444d9bc9fa</uuid>
  <memory unit='KiB'>1048576</memory>
  <vcpu placement='static'>1</vcpu>
  <os>
    <type arch='x86_64' machine='pc-i440fx-4.0'>hvm</type>
    <loader>/usr/share/seabios/bios.bin</loader>
  </os>
  <devices>
   <emulator>/usr/bin/qemu-system-x86_64</emulator>
    <controller type='usb' model='none'/>
    <memballoon model='none'/>
  </devices>
</domain>
bios: Add support for SGA This patch creates new <bios> element which, at this time has only the attribute useserial='yes\|no'. This attribute allow users to use Serial Graphics Adapter and see BIOS messages from the very first moment domain boots up. Therefore, users can choose boot medium, set PXE, etc. 2011-07-08 07:56:17 +00:00			`<domain type='qemu'>`
tests: Unify input files for firmware tests Most of the differences, such as those in the domain name or amount of memory, are fairly harmless, but they still make it more cumbersome than necessary to directly compare different input (and output) files. More importantly, the use of unversioned machine types in some of the test cases results in the descriptor-based autoselection logic being effectively skipped, because the compatible machine types as listed in them are only the versioned variants. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> 2023-02-08 18:28:05 +00:00			`<name>guest</name>`
			`<uuid>63840878-0deb-4095-97e6-fc444d9bc9fa</uuid>`
xml: output memory unit for clarity Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/data tests/out -name '.xml' \| \ xargs sed -i 's/<\(memory\\|currentMemory\\|hard_limit\\|soft_limit\\|min_guarantee\\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/data tests/out -name '.xml' \| \ xargs sed -i 's/<\(capacity\\|allocation\\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/data/.xml: Update all tests. * tests/out/.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise. 2012-02-23 00:48:38 +00:00			`<memory unit='KiB'>1048576</memory>`
numad: Always output 'placement' of <vcpu> <vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs). 2012-05-08 16:04:36 +00:00			`<vcpu placement='static'>1</vcpu>`
bios: Add support for SGA This patch creates new <bios> element which, at this time has only the attribute useserial='yes\|no'. This attribute allow users to use Serial Graphics Adapter and see BIOS messages from the very first moment domain boots up. Therefore, users can choose boot medium, set PXE, etc. 2011-07-08 07:56:17 +00:00			`<os>`
tests: Unify input files for firmware tests Most of the differences, such as those in the domain name or amount of memory, are fairly harmless, but they still make it more cumbersome than necessary to directly compare different input (and output) files. More importantly, the use of unversioned machine types in some of the test cases results in the descriptor-based autoselection logic being effectively skipped, because the compatible machine types as listed in them are only the versioned variants. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> 2023-02-08 18:28:05 +00:00			`<type arch='x86_64' machine='pc-i440fx-4.0'>hvm</type>`
Wire up <loader> to set the QEMU BIOS path * src/qemu/qemu_command.c: Wire up -bios with <loader> * tests/qemuxml2argvdata/qemuxml2argv-bios.args, tests/qemuxml2argvdata/qemuxml2argv-bios.xml: Expand existing BIOS test case to cover <loader> 2012-04-10 14:02:13 +00:00			`<loader>/usr/share/seabios/bios.bin</loader>`
bios: Add support for SGA This patch creates new <bios> element which, at this time has only the attribute useserial='yes\|no'. This attribute allow users to use Serial Graphics Adapter and see BIOS messages from the very first moment domain boots up. Therefore, users can choose boot medium, set PXE, etc. 2011-07-08 07:56:17 +00:00			`</os>`
			`<devices>`
tests: Use x86_64 for all x86 firmware tests Most test cases are on 64-bit architectures already, but there are a couple of exceptions. Right now this works, but it will no longer fly after some upcoming changes. Prepare for those by switching away from 32-bit architectures. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> 2023-02-08 18:24:51 +00:00			`<emulator>/usr/bin/qemu-system-x86_64</emulator>`
tests: Use minimal hardware for firmware tests When testing firmware selection, we don't really care about any of the hardware assigned to the VM, and in fact it's better to keep it as minimal as possible to make sure that the focus remains on the firmware bits. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> 2022-06-09 13:02:19 +00:00			`<controller type='usb' model='none'/>`
			`<memballoon model='none'/>`
bios: Add support for SGA This patch creates new <bios> element which, at this time has only the attribute useserial='yes\|no'. This attribute allow users to use Serial Graphics Adapter and see BIOS messages from the very first moment domain boots up. Therefore, users can choose boot medium, set PXE, etc. 2011-07-08 07:56:17 +00:00			`</devices>`
			`</domain>`