libvirt/src/cpu/cpu_generic.c

221 lines
5.9 KiB
C
Raw Normal View History

Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
/*
* cpu_generic.c: CPU manipulation driver for architectures which are not
* handled by their own driver
*
* Copyright (C) 2009-2011 Red Hat, Inc.
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see
* <http://www.gnu.org/licenses/>.
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
*
* Authors:
* Jiri Denemark <jdenemar@redhat.com>
*/
#include <config.h>
2012-12-12 18:06:53 +00:00
#include "viralloc.h"
#include "virhash.h"
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
#include "cpu.h"
#include "cpu_generic.h"
#include "virstring.h"
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
#define VIR_FROM_THIS VIR_FROM_CPU
static virHashTablePtr
genericHashFeatures(virCPUDefPtr cpu)
{
virHashTablePtr hash;
size_t i;
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
if ((hash = virHashCreate(cpu->nfeatures, NULL)) == NULL)
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
return NULL;
for (i = 0; i < cpu->nfeatures; i++) {
if (virHashAddEntry(hash,
cpu->features[i].name,
cpu->features + i)) {
virHashFree(hash);
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
return NULL;
}
}
return hash;
}
static virCPUCompareResult
genericCompare(virCPUDefPtr host,
virCPUDefPtr cpu,
bool failIncompatible)
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
{
virHashTablePtr hash = NULL;
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
virCPUCompareResult ret = VIR_CPU_COMPARE_ERROR;
size_t i;
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
unsigned int reqfeatures;
if ((cpu->arch != VIR_ARCH_NONE &&
host->arch != cpu->arch) ||
STRNEQ(host->model, cpu->model)) {
ret = VIR_CPU_COMPARE_INCOMPATIBLE;
goto cleanup;
}
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
if ((hash = genericHashFeatures(host)) == NULL)
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
goto cleanup;
reqfeatures = 0;
for (i = 0; i < cpu->nfeatures; i++) {
void *hval = virHashLookup(hash, cpu->features[i].name);
if (hval) {
if (cpu->type == VIR_CPU_TYPE_GUEST &&
cpu->features[i].policy == VIR_CPU_FEATURE_FORBID) {
ret = VIR_CPU_COMPARE_INCOMPATIBLE;
goto cleanup;
}
reqfeatures++;
} else if (cpu->type == VIR_CPU_TYPE_HOST ||
cpu->features[i].policy == VIR_CPU_FEATURE_REQUIRE) {
ret = VIR_CPU_COMPARE_INCOMPATIBLE;
goto cleanup;
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
}
}
if (host->nfeatures > reqfeatures) {
if (cpu->type == VIR_CPU_TYPE_GUEST &&
cpu->match == VIR_CPU_MATCH_STRICT)
ret = VIR_CPU_COMPARE_INCOMPATIBLE;
else
ret = VIR_CPU_COMPARE_SUPERSET;
} else {
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
ret = VIR_CPU_COMPARE_IDENTICAL;
}
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
cleanup:
virHashFree(hash);
if (failIncompatible && ret == VIR_CPU_COMPARE_INCOMPATIBLE) {
ret = VIR_CPU_COMPARE_ERROR;
virReportError(VIR_ERR_CPU_INCOMPATIBLE, NULL);
}
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
return ret;
}
static virCPUDefPtr
genericBaseline(virCPUDefPtr *cpus,
unsigned int ncpus,
const char **models,
unsigned int nmodels,
unsigned int flags)
{
virCPUDefPtr cpu = NULL;
virCPUFeatureDefPtr features = NULL;
unsigned int nfeatures;
unsigned int count;
size_t i, j;
virCheckFlags(VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES |
VIR_CONNECT_BASELINE_CPU_MIGRATABLE, NULL);
if (!cpuModelIsAllowed(cpus[0]->model, models, nmodels)) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("CPU model %s is not supported by hypervisor"),
cpus[0]->model);
goto error;
}
if (VIR_ALLOC(cpu) < 0 ||
VIR_STRDUP(cpu->model, cpus[0]->model) < 0 ||
VIR_ALLOC_N(features, cpus[0]->nfeatures) < 0)
goto error;
cpu->arch = cpus[0]->arch;
cpu->type = VIR_CPU_TYPE_HOST;
count = nfeatures = cpus[0]->nfeatures;
for (i = 0; i < nfeatures; i++)
features[i].name = cpus[0]->features[i].name;
for (i = 1; i < ncpus; i++) {
virHashTablePtr hash;
if (cpu->arch != cpus[i]->arch) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("CPUs have incompatible architectures: '%s' != '%s'"),
virArchToString(cpu->arch),
virArchToString(cpus[i]->arch));
goto error;
}
if (STRNEQ(cpu->model, cpus[i]->model)) {
virReportError(VIR_ERR_INTERNAL_ERROR,
_("CPU models don't match: '%s' != '%s'"),
cpu->model, cpus[i]->model);
goto error;
}
if (!(hash = genericHashFeatures(cpus[i])))
goto error;
for (j = 0; j < nfeatures; j++) {
if (features[j].name &&
!virHashLookup(hash, features[j].name)) {
features[j].name = NULL;
count--;
}
}
virHashFree(hash);
}
if (VIR_ALLOC_N(cpu->features, count) < 0)
goto error;
cpu->nfeatures = count;
j = 0;
for (i = 0; i < nfeatures; i++) {
if (!features[i].name)
continue;
if (VIR_STRDUP(cpu->features[j++].name, features[i].name) < 0)
goto error;
}
cleanup:
VIR_FREE(features);
return cpu;
error:
virCPUDefFree(cpu);
cpu = NULL;
goto cleanup;
}
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
struct cpuArchDriver cpuDriverGeneric = {
.name = "generic",
.arch = NULL,
.narch = 0,
.compare = genericCompare,
.decode = NULL,
.encode = NULL,
.free = NULL,
.nodeData = NULL,
.guestData = NULL,
.baseline = genericBaseline,
.update = NULL,
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
};