libvirt/bootstrap

854 lines
25 KiB
Plaintext
Raw Normal View History

#! /bin/sh
# Print a version string.
scriptversion=2010-02-24.17; # UTC
# Bootstrap this package from checked-out sources.
# Copyright (C) 2003-2010 Free Software Foundation, Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Originally written by Paul Eggert. The canonical version of this
# script is maintained as build-aux/bootstrap in gnulib, however, to
# be useful to your project, you should place a copy of it under
# version control in the top-level directory of your project. The
# intent is that all customization can be done with a bootstrap.conf
# file also maintained in your version control; gnulib comes with a
# template build-aux/bootstrap.conf to get you started.
# Please report bugs or propose patches to bug-gnulib@gnu.org.
nl='
'
# Ensure file names are sorted consistently across platforms.
LC_ALL=C
export LC_ALL
local_gl_dir=gl
# Temporary directory names.
bt='._bootmp'
bt_regex=`echo "$bt"| sed 's/\./[.]/g'`
bt2=${bt}2
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
usage() {
cat <<EOF
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
Usage: $0 [OPTION]...
Bootstrap this package from the checked-out sources.
Options:
--gnulib-srcdir=DIRNAME Specify the local directory where gnulib
sources reside. Use this if you already
have gnulib sources on your machine, and
do not want to waste your bandwidth downloading
them again. Defaults to \$GNULIB_SRCDIR.
--copy Copy files instead of creating symbolic links.
--force Attempt to bootstrap even if the sources seem
not to have been checked out.
--skip-po Do not download po files.
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
If the file $0.conf exists in the same directory as this script, its
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
contents are read as shell variables to configure the bootstrap.
For build prerequisites, environment variables like \$AUTOCONF and \$AMTAR
are honored.
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
Running without arguments will suffice in most cases.
EOF
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
}
# Configuration.
# Name of the Makefile.am
gnulib_mk=gnulib.mk
# List of gnulib modules needed.
gnulib_modules=
# Any gnulib files needed that are not in modules.
gnulib_files=
# A function to be called after everything else in this script.
# Override it via your own definition in bootstrap.conf.
bootstrap_epilogue() { :; }
# The command to download all .po files for a specified domain into
# a specified directory. Fill in the first %s is the domain name, and
# the second with the destination directory. Use rsync's -L and -r
# options because the latest/%s directory and the .po files within are
# all symlinks.
po_download_command_format=\
"rsync -Lrtvz 'translationproject.org::tp/latest/%s/' '%s'"
extract_package_name='
/^AC_INIT(/{
/.*,.*,.*, */{
s///
s/[][]//g
s/)$//
p
q
}
s/AC_INIT(\[*//
s/]*,.*//
s/^GNU //
y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
s/[^A-Za-z0-9_]/-/g
p
}
'
package=`sed -n "$extract_package_name" configure.ac` || exit
gnulib_name=lib$package
build_aux=build-aux
source_base=lib
m4_base=m4
doc_base=doc
tests_base=tests
# Extra files from gnulib, which override files from other sources.
gnulib_extra_files="
$build_aux/install-sh
$build_aux/missing
$build_aux/mdate-sh
$build_aux/texinfo.tex
$build_aux/depcomp
$build_aux/config.guess
$build_aux/config.sub
doc/INSTALL
"
# Additional gnulib-tool options to use. Use "\newline" to break lines.
gnulib_tool_option_extras=
# Other locale categories that need message catalogs.
EXTRA_LOCALE_CATEGORIES=
# Additional xgettext options to use. Use "\\\newline" to break lines.
XGETTEXT_OPTIONS='\\\
--flag=_:1:pass-c-format\\\
--flag=N_:1:pass-c-format\\\
--flag=error:3:c-format --flag=error_at_line:5:c-format\\\
'
# Package bug report address and copyright holder for gettext files
COPYRIGHT_HOLDER='Free Software Foundation, Inc.'
MSGID_BUGS_ADDRESS=bug-$package@gnu.org
# Files we don't want to import.
excluded_files=
# File that should exist in the top directory of a checked out hierarchy,
# but not in a distribution tarball.
checkout_only_file=README-hacking
# Whether to use copies instead of symlinks.
copy=false
# Set this to '.cvsignore .gitignore' in bootstrap.conf if you want
# those files to be generated in directories like lib/, m4/, and po/.
# Or set it to 'auto' to make this script select which to use based
# on which version control system (if any) is used in the source directory.
vc_ignore=auto
# find_tool ENVVAR NAMES...
# -------------------------
# Search for a required program. Use the value of ENVVAR, if set,
# otherwise find the first of the NAMES that can be run (i.e.,
# supports --version). If found, set ENVVAR to the program name,
# die otherwise.
find_tool ()
{
find_tool_envvar=$1
shift
find_tool_names=$@
eval "find_tool_res=\$$find_tool_envvar"
if test x"$find_tool_res" = x; then
for i
do
if ($i --version </dev/null) >/dev/null 2>&1; then
find_tool_res=$i
break
fi
done
else
find_tool_error_prefix="\$$find_tool_envvar: "
fi
if test x"$find_tool_res" = x; then
echo >&2 "$0: one of these is required: $find_tool_names"
exit 1
fi
($find_tool_res --version </dev/null) >/dev/null 2>&1 || {
echo >&2 "$0: ${find_tool_error_prefix}cannot run $find_tool_res --version"
exit 1
}
eval "$find_tool_envvar=\$find_tool_res"
eval "export $find_tool_envvar"
}
# Find sha1sum, named gsha1sum on MacPorts, and shasum on MacOS 10.6.
find_tool SHA1SUM sha1sum gsha1sum shasum
# Override the default configuration, if necessary.
# Make sure that bootstrap.conf is sourced from the current directory
# if we were invoked as "sh bootstrap".
case "$0" in
*/*) test -r "$0.conf" && . "$0.conf" ;;
*) test -r "$0.conf" && . ./"$0.conf" ;;
esac
if test "$vc_ignore" = auto; then
vc_ignore=
test -d .git && vc_ignore=.gitignore
test -d CVS && vc_ignore="$vc_ignore .cvsignore"
fi
# Translate configuration into internal form.
# Parse options.
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
for option
do
case $option in
--help)
usage
exit;;
--gnulib-srcdir=*)
GNULIB_SRCDIR=`expr "X$option" : 'X--gnulib-srcdir=\(.*\)'`;;
--skip-po)
SKIP_PO=t;;
--force)
checkout_only_file=;;
--copy)
copy=true;;
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
*)
echo >&2 "$0: $option: unknown option"
exit 1;;
esac
done
if test -n "$checkout_only_file" && test ! -r "$checkout_only_file"; then
echo "$0: Bootstrapping from a non-checked-out distribution is risky." >&2
exit 1
fi
# If $STR is not already on a line by itself in $FILE, insert it,
# sorting the new contents of the file and replacing $FILE with the result.
insert_sorted_if_absent() {
file=$1
str=$2
test -f $file || touch $file
echo "$str" | sort -u - $file | cmp - $file > /dev/null \
|| echo "$str" | sort -u - $file -o $file \
|| exit 1
}
# Die if there is no AC_CONFIG_AUX_DIR($build_aux) line in configure.ac.
found_aux_dir=no
grep '^[ ]*AC_CONFIG_AUX_DIR(\['"$build_aux"'\])' configure.ac \
>/dev/null && found_aux_dir=yes
grep '^[ ]*AC_CONFIG_AUX_DIR('"$build_aux"')' configure.ac \
>/dev/null && found_aux_dir=yes
if test $found_aux_dir = no; then
echo "$0: expected line not found in configure.ac. Add the following:" >&2
echo " AC_CONFIG_AUX_DIR([$build_aux])" >&2
exit 1
fi
# If $build_aux doesn't exist, create it now, otherwise some bits
# below will malfunction. If creating it, also mark it as ignored.
if test ! -d $build_aux; then
mkdir $build_aux
for dot_ig in x $vc_ignore; do
test $dot_ig = x && continue
insert_sorted_if_absent $dot_ig $build_aux
done
fi
# Note this deviates from the version comparison in automake
# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
# but this should suffice as we won't be specifying old
# version formats or redundant trailing .0 in bootstrap.conf.
# If we did want full compatibility then we should probably
# use m4_version_compare from autoconf.
sort_ver() { # sort -V is not generally available
ver1="$1"
ver2="$2"
# split on '.' and compare each component
i=1
while : ; do
p1=$(echo "$ver1" | cut -d. -f$i)
p2=$(echo "$ver2" | cut -d. -f$i)
if [ ! "$p1" ]; then
echo "$1 $2"
break
elif [ ! "$p2" ]; then
echo "$2 $1"
break
elif [ ! "$p1" = "$p2" ]; then
if [ "$p1" -gt "$p2" ] 2>/dev/null; then # numeric comparison
echo "$2 $1"
elif [ "$p2" -gt "$p1" ] 2>/dev/null; then # numeric comparison
echo "$1 $2"
else # numeric, then lexicographic comparison
lp=$(printf "$p1\n$p2\n" | LANG=C sort -n | tail -n1)
if [ "$lp" = "$p2" ]; then
echo "$1 $2"
else
echo "$2 $1"
fi
fi
break
fi
i=$(($i+1))
done
}
get_version() {
app=$1
$app --version >/dev/null 2>&1 || return 1
$app --version 2>&1 |
sed -n '# extract version within line
s/.*[v ]\{1,\}\([0-9]\{1,\}\.[.a-z0-9-]*\).*/\1/
t done
# extract version at start of line
s/^\([0-9]\{1,\}\.[.a-z0-9-]*\).*/\1/
t done
d
:done
#the following essentially does s/5.005/5.5/
s/\.0*\([1-9]\)/.\1/g
p
q'
}
check_versions() {
ret=0
while read app req_ver; do
# Honor $APP variables ($TAR, $AUTOCONF, etc.)
appvar=`echo $app | tr '[a-z]' '[A-Z]'`
test "$appvar" = TAR && appvar=AMTAR
eval "app=\${$appvar-$app}"
inst_ver=$(get_version $app)
if [ ! "$inst_ver" ]; then
echo "Error: '$app' not found" >&2
ret=1
elif [ ! "$req_ver" = "-" ]; then
latest_ver=$(sort_ver $req_ver $inst_ver | cut -d' ' -f2)
if [ ! "$latest_ver" = "$inst_ver" ]; then
echo "Error: '$app' version == $inst_ver is too old" >&2
echo " '$app' version >= $req_ver is required" >&2
ret=1
fi
fi
done
return $ret
}
print_versions() {
echo "Program Min_version"
echo "----------------------"
printf "$buildreq"
echo "----------------------"
# can't depend on column -t
}
if ! printf "$buildreq" | check_versions; then
test -f README-prereq &&
echo "See README-prereq for notes on obtaining these prerequisite programs:" >&2
echo
print_versions
exit 1
fi
echo "$0: Bootstrapping from checked-out $package sources..."
# See if we can use gnulib's git-merge-changelog merge driver.
if test -d .git && (git --version) >/dev/null 2>/dev/null ; then
if git config merge.merge-changelog.driver >/dev/null ; then
:
elif (git-merge-changelog --version) >/dev/null 2>/dev/null ; then
echo "initializing git-merge-changelog driver"
git config merge.merge-changelog.name 'GNU-style ChangeLog merge driver'
git config merge.merge-changelog.driver 'git-merge-changelog %O %A %B'
else
echo "consider installing git-merge-changelog from gnulib"
fi
fi
cleanup_gnulib() {
status=$?
rm -fr "$gnulib_path"
exit $status
}
git_modules_config () {
test -f .gitmodules && git config --file .gitmodules "$@"
}
gnulib_path=`git_modules_config submodule.gnulib.path`
# Get gnulib files.
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
case ${GNULIB_SRCDIR--} in
-)
if git_modules_config submodule.gnulib.url >/dev/null; then
echo "$0: getting gnulib files..."
git submodule init || exit $?
git submodule update || exit $?
elif [ ! -d "$gnulib_path" ]; then
echo "$0: getting gnulib files..."
trap cleanup_gnulib 1 2 13 15
git clone --help|grep depth > /dev/null && shallow='--depth 2' || shallow=
git clone $shallow git://git.sv.gnu.org/gnulib "$gnulib_path" ||
cleanup_gnulib
trap - 1 2 13 15
fi
GNULIB_SRCDIR=$gnulib_path
;;
*)
# Use GNULIB_SRCDIR as a reference.
if test -d "$GNULIB_SRCDIR"/.git && \
git_modules_config submodule.gnulib.url >/dev/null; then
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
echo "$0: getting gnulib files..."
if git submodule --help|grep reference > /dev/null; then
# Prefer the one-liner available in git 1.6.4 or newer.
git submodule update --init --reference "$GNULIB_SRCDIR" \
"$gnulib_path" || exit $?
else
# This fallback allows at least git 1.5.5.
if test -f "$gnulib_path"/gnulib-tool; then
# Since file already exists, assume submodule init already complete.
git submodule update || exit $?
else
# Older git can't clone into an empty directory.
rmdir "$gnulib_path" 2>/dev/null
git clone --reference "$GNULIB_SRCDIR" \
"$(git_modules_config submodule.gnulib.url)" "$gnulib_path" \
&& git submodule init && git submodule update \
|| exit $?
fi
fi
GNULIB_SRCDIR=$gnulib_path
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
fi
;;
Use gnulib, starting with its physmem and getaddrinfo modules. New files go into these directories: gnulib/lib gnulib/m4 gnulib/tests * bootstrap: A wrapper around gnulib-tool. * configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY before any macro that uses AC_COMPILE_IFELSE. (AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile. * Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests early enough that those tests run before any libvirt unit tests. * m4/Makefile.am: Remove file. Not needed. * src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la. * src/nodeinfo.c: Include "physmem.h". * qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h". (MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions. (virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate. * tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib. (LDADDS): Add ../gnulib/lib/libgnu.la. * qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la. * tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total memory from a file. Update expected output not to include "Memory: NNNN" * tests/nodeinfodata/linux-nodeinfo-1.txt: * tests/nodeinfodata/linux-nodeinfo-2.txt: * tests/nodeinfodata/linux-nodeinfo-3.txt: * tests/nodeinfodata/linux-nodeinfo-4.txt: * tests/nodeinfodata/linux-nodeinfo-5.txt: * tests/nodeinfodata/linux-nodeinfo-6.txt: * src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that would conflict with the one now in "config.h". * autogen.sh: Add -I gnulib/m4. * src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE. Instead, include "config.h". * qemud/qemud.c: Remove definition of _GNU_SOURCE. * src/openvz_driver.c: Likewise. * src/qemu_driver.c: Likewise. * src/remote_internal.c: Likewise. * configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch of gettextize-generated files go into build-aux/, rather than in the top-level directory. * .cvsignore: Adjust. * build-aux/.cvsignore: New file. Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
esac
gnulib_tool=$GNULIB_SRCDIR/gnulib-tool
<$gnulib_tool || exit
# Get translations.
download_po_files() {
subdir=$1
domain=$2
echo "$0: getting translations into $subdir for $domain..."
cmd=`printf "$po_download_command_format" "$domain" "$subdir"`
eval "$cmd"
}
# Download .po files to $po_dir/.reference and copy only the new
# or modified ones into $po_dir. Also update $po_dir/LINGUAS.
update_po_files() {
# Directory containing primary .po files.
# Overwrite them only when we're sure a .po file is new.
po_dir=$1
domain=$2
# Download *.po files into this dir.
# Usually contains *.s1 checksum files.
ref_po_dir="$po_dir/.reference"
test -d $ref_po_dir || mkdir $ref_po_dir || return
download_po_files $ref_po_dir $domain \
&& ls "$ref_po_dir"/*.po 2>/dev/null |
sed 's|.*/||; s|\.po$||' > "$po_dir/LINGUAS"
langs=`cd $ref_po_dir && echo *.po|sed 's/\.po//g'`
test "$langs" = '*' && langs=x
for po in $langs; do
case $po in x) continue;; esac
new_po="$ref_po_dir/$po.po"
cksum_file="$ref_po_dir/$po.s1"
if ! test -f "$cksum_file" ||
! test -f "$po_dir/$po.po" ||
! $SHA1SUM -c --status "$cksum_file" \
< "$new_po" > /dev/null; then
echo "updated $po_dir/$po.po..."
cp "$new_po" "$po_dir/$po.po" \
&& $SHA1SUM < "$new_po" > "$cksum_file"
fi
done
}
case $SKIP_PO in
'')
if test -d po; then
update_po_files po $package || exit
fi
if test -d runtime-po; then
update_po_files runtime-po $package-runtime || exit
fi;;
esac
symlink_to_dir()
{
src=$1/$2
dst=${3-$2}
test -f "$src" && {
# If the destination directory doesn't exist, create it.
# This is required at least for "lib/uniwidth/cjk.h".
dst_dir=`dirname "$dst"`
if ! test -d "$dst_dir"; then
mkdir -p "$dst_dir"
# If we've just created a directory like lib/uniwidth,
# tell version control system(s) it's ignorable.
# FIXME: for now, this does only one level
parent=`dirname "$dst_dir"`
for dot_ig in x $vc_ignore; do
test $dot_ig = x && continue
ig=$parent/$dot_ig
insert_sorted_if_absent $ig `echo "$dst_dir"|sed 's,.*/,,'`
done
fi
if $copy; then
{
test ! -h "$dst" || {
echo "$0: rm -f $dst" &&
rm -f "$dst"
}
} &&
test -f "$dst" &&
cmp -s "$src" "$dst" || {
echo "$0: cp -fp $src $dst" &&
cp -fp "$src" "$dst"
}
else
test -h "$dst" &&
src_ls=`ls -diL "$src" 2>/dev/null` && set $src_ls && src_i=$1 &&
dst_ls=`ls -diL "$dst" 2>/dev/null` && set $dst_ls && dst_i=$1 &&
test "$src_i" = "$dst_i" || {
dot_dots=
case $src in
/*) ;;
*)
case /$dst/ in
*//* | */../* | */./* | /*/*/*/*/*/)
echo >&2 "$0: invalid symlink calculation: $src -> $dst"
exit 1;;
/*/*/*/*/) dot_dots=../../../;;
/*/*/*/) dot_dots=../../;;
/*/*/) dot_dots=../;;
esac;;
esac
echo "$0: ln -fs $dot_dots$src $dst" &&
ln -fs "$dot_dots$src" "$dst"
}
fi
}
}
cp_mark_as_generated()
{
cp_src=$1
cp_dst=$2
if cmp -s "$cp_src" "$GNULIB_SRCDIR/$cp_dst"; then
symlink_to_dir "$GNULIB_SRCDIR" "$cp_dst"
elif cmp -s "$cp_src" "$local_gl_dir/$cp_dst"; then
symlink_to_dir $local_gl_dir "$cp_dst"
else
case $cp_dst in
*.[ch]) c1='/* '; c2=' */';;
*.texi) c1='@c '; c2= ;;
*.m4|*/Make*|Make*) c1='# ' ; c2= ;;
*) c1= ; c2= ;;
esac
# If the destination directory doesn't exist, create it.
# This is required at least for "lib/uniwidth/cjk.h".
dst_dir=`dirname "$cp_dst"`
test -d "$dst_dir" || mkdir -p "$dst_dir"
if test -z "$c1"; then
cmp -s "$cp_src" "$cp_dst" || {
# Copy the file first to get proper permissions if it
# doesn't already exist. Then overwrite the copy.
echo "$0: cp -f $cp_src $cp_dst" &&
rm -f "$cp_dst" &&
cp "$cp_src" "$cp_dst-t" &&
sed "s!$bt_regex/!!g" "$cp_src" > "$cp_dst-t" &&
mv -f "$cp_dst-t" "$cp_dst"
}
else
# Copy the file first to get proper permissions if it
# doesn't already exist. Then overwrite the copy.
cp "$cp_src" "$cp_dst-t" &&
(
echo "$c1-*- buffer-read-only: t -*- vi: set ro:$c2" &&
echo "${c1}DO NOT EDIT! GENERATED AUTOMATICALLY!$c2" &&
sed "s!$bt_regex/!!g" "$cp_src"
) > $cp_dst-t &&
if cmp -s "$cp_dst-t" "$cp_dst"; then
rm -f "$cp_dst-t"
else
echo "$0: cp $cp_src $cp_dst # with edits" &&
mv -f "$cp_dst-t" "$cp_dst"
fi
fi
fi
}
version_controlled_file() {
dir=$1
file=$2
found=no
if test -d CVS; then
grep -F "/$file/" $dir/CVS/Entries 2>/dev/null |
grep '^/[^/]*/[0-9]' > /dev/null && found=yes
elif test -d .git; then
git rm -n "$dir/$file" > /dev/null 2>&1 && found=yes
elif test -d .svn; then
svn log -r HEAD "$dir/$file" > /dev/null 2>&1 && found=yes
else
echo "$0: no version control for $dir/$file?" >&2
fi
test $found = yes
}
slurp() {
for dir in . `(cd $1 && find * -type d -print)`; do
copied=
sep=
for file in `ls -a $1/$dir`; do
case $file in
.|..) continue;;
.*) continue;; # FIXME: should all file names starting with "." be ignored?
esac
test -d $1/$dir/$file && continue
for excluded_file in $excluded_files; do
test "$dir/$file" = "$excluded_file" && continue 2
done
if test $file = Makefile.am && test "X$gnulib_mk" != XMakefile.am; then
copied=$copied${sep}$gnulib_mk; sep=$nl
remove_intl='/^[^#].*\/intl/s/^/#/;'"s!$bt_regex/!!g"
sed "$remove_intl" $1/$dir/$file | cmp - $dir/$gnulib_mk > /dev/null || {
echo "$0: Copying $1/$dir/$file to $dir/$gnulib_mk ..." &&
rm -f $dir/$gnulib_mk &&
sed "$remove_intl" $1/$dir/$file >$dir/$gnulib_mk
}
elif { test "${2+set}" = set && test -r $2/$dir/$file; } ||
version_controlled_file $dir $file; then
echo "$0: $dir/$file overrides $1/$dir/$file"
else
copied=$copied$sep$file; sep=$nl
if test $file = gettext.m4; then
echo "$0: patching m4/gettext.m4 to remove need for intl/* ..."
rm -f $dir/$file
sed '
/^AC_DEFUN(\[AM_INTL_SUBDIR],/,/^]/c\
AC_DEFUN([AM_INTL_SUBDIR], [])
/^AC_DEFUN(\[gt_INTL_SUBDIR_CORE],/,/^]/c\
AC_DEFUN([gt_INTL_SUBDIR_CORE], [])
$a\
AC_DEFUN([gl_LOCK_EARLY], [])
' $1/$dir/$file >$dir/$file
else
cp_mark_as_generated $1/$dir/$file $dir/$file
fi
fi || exit
done
for dot_ig in x $vc_ignore; do
test $dot_ig = x && continue
ig=$dir/$dot_ig
if test -n "$copied"; then
insert_sorted_if_absent $ig "$copied"
# If an ignored file name ends with .in.h, then also add
# the name with just ".h". Many gnulib headers are generated,
# e.g., stdint.in.h -> stdint.h, dirent.in.h ->..., etc.
# Likewise for .gperf -> .h, .y -> .c, and .sin -> .sed
f=`echo "$copied"|sed 's/\.in\.h$/.h/;s/\.sin$/.sed/;s/\.y$/.c/;s/\.gperf$/.h/'`
insert_sorted_if_absent $ig "$f"
# For files like sys_stat.in.h and sys_time.in.h, record as
# ignorable the directory we might eventually create: sys/.
f=`echo "$copied"|sed 's/sys_.*\.in\.h$/sys/'`
insert_sorted_if_absent $ig "$f"
fi
done
done
}
# Create boot temporary directories to import from gnulib and gettext.
rm -fr $bt $bt2 &&
mkdir $bt $bt2 || exit
# Import from gnulib.
gnulib_tool_options="\
--import\
--no-changelog\
--aux-dir $bt/$build_aux\
--doc-base $bt/$doc_base\
--lib $gnulib_name\
--m4-base $bt/$m4_base/\
--source-base $bt/$source_base/\
--tests-base $bt/$tests_base\
--local-dir $local_gl_dir\
$gnulib_tool_option_extras\
"
echo "$0: $gnulib_tool $gnulib_tool_options --import ..."
$gnulib_tool $gnulib_tool_options --import $gnulib_modules &&
slurp $bt || exit
for file in $gnulib_files; do
symlink_to_dir "$GNULIB_SRCDIR" $file || exit
done
# Import from gettext.
with_gettext=yes
grep '^[ ]*AM_GNU_GETTEXT_VERSION(' configure.ac >/dev/null || \
with_gettext=no
if test $with_gettext = yes; then
echo "$0: (cd $bt2; ${AUTOPOINT-autopoint}) ..."
cp configure.ac $bt2 &&
(cd $bt2 && ${AUTOPOINT-autopoint} && rm configure.ac) &&
slurp $bt2 $bt || exit
fi
rm -fr $bt $bt2 || exit
# Remove any dangling symlink matching "*.m4" or "*.[ch]" in some
# gnulib-populated directories. Such .m4 files would cause aclocal to fail.
# The following requires GNU find 4.2.3 or newer. Considering the usual
# portability constraints of this script, that may seem a very demanding
# requirement, but it should be ok. Ignore any failure, which is fine,
# since this is only a convenience to help developers avoid the relatively
# unusual case in which a symlinked-to .m4 file is git-removed from gnulib
# between successive runs of this script.
find "$m4_base" "$source_base" \
-depth \( -name '*.m4' -o -name '*.[ch]' \) \
-type l -xtype l -delete > /dev/null 2>&1
# Reconfigure, getting other files.
# Skip autoheader if it's not needed.
grep -E '^[ ]*AC_CONFIG_HEADERS?\>' configure.ac >/dev/null ||
AUTOHEADER=true
for command in \
libtool \
"${ACLOCAL-aclocal} --force -I m4" \
"${AUTOCONF-autoconf} --force" \
"${AUTOHEADER-autoheader} --force" \
"${AUTOMAKE-automake} --add-missing --copy --force-missing"
do
if test "$command" = libtool; then
use_libtool=0
# We'd like to use grep -E, to see if any of LT_INIT,
# AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac,
# but that's not portable enough (e.g., for Solaris).
grep '^[ ]*A[CM]_PROG_LIBTOOL' configure.ac >/dev/null \
&& use_libtool=1
grep '^[ ]*LT_INIT' configure.ac >/dev/null \
&& use_libtool=1
test $use_libtool = 0 \
&& continue
command="${LIBTOOLIZE-libtoolize} -c -f"
fi
echo "$0: $command ..."
$command || exit
done
# Get some extra files from gnulib, overriding existing files.
for file in $gnulib_extra_files; do
case $file in
*/INSTALL) dst=INSTALL;;
build-aux/*) dst=$build_aux/`expr "$file" : 'build-aux/\(.*\)'`;;
*) dst=$file;;
esac
symlink_to_dir "$GNULIB_SRCDIR" $file $dst || exit
done
if test $with_gettext = yes; then
# Create gettext configuration.
echo "$0: Creating po/Makevars from po/Makevars.template ..."
rm -f po/Makevars
sed '
/^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/
/^COPYRIGHT_HOLDER *=/s/=.*/= '"$COPYRIGHT_HOLDER"'/
/^MSGID_BUGS_ADDRESS *=/s|=.*|= '"$MSGID_BUGS_ADDRESS"'|
/^XGETTEXT_OPTIONS *=/{
s/$/ \\/
a\
'"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+}
}
' po/Makevars.template >po/Makevars
if test -d runtime-po; then
# Similarly for runtime-po/Makevars, but not quite the same.
rm -f runtime-po/Makevars
sed '
/^DOMAIN *=.*/s/=.*/= '"$package"'-runtime/
/^subdir *=.*/s/=.*/= runtime-po/
/^MSGID_BUGS_ADDRESS *=/s/=.*/= bug-'"$package"'@gnu.org/
/^XGETTEXT_OPTIONS *=/{
s/$/ \\/
a\
'"$XGETTEXT_OPTIONS_RUNTIME"' $${end_of_xgettext_options+}
}
' <po/Makevars.template >runtime-po/Makevars
# Copy identical files from po to runtime-po.
(cd po && cp -p Makefile.in.in *-quot *.header *.sed *.sin ../runtime-po)
fi
fi
bootstrap_epilogue
echo "$0: done. Now you can run './configure'."
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End: