libvirt/src/util/macvtap.c

1628 lines
44 KiB
C
Raw Normal View History

/*
build: consistently use C99 varargs macros Prior to this patch, there was an inconsistent mix between GNU and C99. For consistency, and potential portability to other compilers, stick with the C99 vararg macro syntax. * src/conf/cpu_conf.c (virCPUReportError): Use C99 rather than GNU vararg macro syntax. * src/conf/domain_conf.c (virDomainReportError): Likewise. * src/conf/domain_event.c (eventReportError): Likewise. * src/conf/interface_conf.c (virInterfaceReportError): Likewise. * src/conf/network_conf.c (virNetworkReportError): Likewise. * src/conf/node_device_conf.h (virNodeDeviceReportError): Likewise. * src/conf/secret_conf.h (virSecretReportError): Likewise. * src/conf/storage_conf.h (virStorageReportError): Likewise. * src/esx/esx_device_monitor.c (ESX_ERROR): Use C99 rather than GNU vararg macro syntax. * src/esx/esx_driver.c (ESX_ERROR): Likewise. * src/esx/esx_interface_driver.c (ESX_ERROR): Likewise. * src/esx/esx_network_driver.c (ESX_ERROR): Likewise. * src/esx/esx_secret_driver.c (ESX_ERROR): Likewise. * src/esx/esx_storage_driver.c (ESX_ERROR): Likewise. * src/esx/esx_util.c (ESX_ERROR): Likewise. * src/esx/esx_vi.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vi_methods.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vi_types.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vmx.c (ESX_ERROR): Likewise. * src/util/hostusb.c (usbReportError): Use C99 rather than GNU vararg macro syntax. * src/util/json.c (virJSONError): Likewise. * src/util/macvtap.c (ReportError): Likewise. * src/util/pci.c (pciReportError): Likewise. * src/util/stats_linux.c (virStatsError): Likewise. * src/util/util.c (virUtilError): Likewise. * src/util/xml.c (virXMLError): Likewise. * src/xen/proxy_internal.c (virProxyError): Use C99 rather than GNU vararg macro syntax. * src/xen/sexpr.c (virSexprError): Likewise. * src/xen/xen_driver.c (xenUnifiedError): Likewise. * src/xen/xen_hypervisor.c (virXenError): Likewise. * src/xen/xen_inotify.c (virXenInotifyError): Likewise. * src/xen/xend_internal.c (virXendError): Likewise. * src/xen/xm_internal.c (xenXMError): Likewise. * src/xen/xs_internal.c (virXenStoreError): Likewise. * src/cpu/cpu.h (virCPUReportError): Use C99 rather than GNU vararg macro syntax. * src/datatypes.c (virLibConnError): Likewise. * src/interface/netcf_driver.c (interfaceReportError): Likewise. * src/libvirt.c (virLibStreamError): Likewise. * src/lxc/lxc_conf.h (lxcError): Likewise. * src/network/bridge_driver.c (networkReportError): Likewise. * src/nodeinfo.c (nodeReportError): Likewise. * src/opennebula/one_conf.h (oneError): Likewise. * src/openvz/openvz_conf.h (openvzError): Likewise. * src/phyp/phyp_driver.c (PHYP_ERROR): Likewise. * src/qemu/qemu_conf.h (qemuReportError): Likewise. * src/remote/remote_driver.c (errorf): Likewise. * src/security/security_driver.h (virSecurityReportError): Likewise. * src/test/test_driver.c (testError): Likewise. * src/uml/uml_conf.h (umlReportError): Likewise. * src/vbox/vbox_driver.c (vboxError): Likewise. * src/vbox/vbox_tmpl.c (vboxError): Likewise.
2010-03-01 23:38:28 +00:00
* Copyright (C) 2010 Red Hat, Inc.
* Copyright (C) 2010 IBM Corporation
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Authors:
* Stefan Berger <stefanb@us.ibm.com>
*
* Notes:
* netlink: http://lovezutto.googlepages.com/netlink.pdf
* iproute2 package
*
*/
#include <config.h>
#include <stdint.h>
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
#if WITH_MACVTAP || WITH_VIRTUALPORT
# include <stdio.h>
# include <errno.h>
# include <fcntl.h>
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
# include <c-ctype.h>
# include <sys/socket.h>
# include <sys/ioctl.h>
# include <linux/if.h>
# include <linux/netlink.h>
# include <linux/rtnetlink.h>
# include <linux/if_tun.h>
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
# include <netlink/msg.h>
#endif /* WITH_MACVTAP || WITH_VIRTUALPORT */
#include "util.h"
#include "macvtap.h"
#if WITH_MACVTAP || WITH_VIRTUALPORT
# include "memory.h"
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
# include "logging.h"
# include "interface.h"
# include "conf/domain_conf.h"
# include "virterror_internal.h"
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
# include "uuid.h"
# include "files.h"
# define VIR_FROM_THIS VIR_FROM_NET
# define macvtapError(code, ...) \
virReportErrorHelper(NULL, VIR_FROM_NET, code, __FILE__, \
__FUNCTION__, __LINE__, __VA_ARGS__)
# define MACVTAP_NAME_PREFIX "macvtap"
# define MACVTAP_NAME_PATTERN "macvtap%d"
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
# define MICROSEC_PER_SEC (1000 * 1000)
# define NLMSGBUF_SIZE 256
# define RATTBUF_SIZE 64
# define NETLINK_ACK_TIMEOUT_S 2
# define STATUS_POLL_TIMEOUT_USEC (10 * MICROSEC_PER_SEC)
# define STATUS_POLL_INTERVL_USEC (MICROSEC_PER_SEC / 8)
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
# define LLDPAD_PID_FILE "/var/run/lldpad.pid"
enum virVirtualPortOp {
ASSOCIATE = 0x1,
DISASSOCIATE = 0x2,
PREASSOCIATE = 0x3,
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
};
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
/**
* nlComm:
* @nlmsg: pointer to netlink message
* @respbuf: pointer to pointer where response buffer will be allocated
* @respbuflen: pointer to integer holding the size of the response buffer
* on return of the function.
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
* @nl_pid: the pid of the process to talk to, i.e., pid = 0 for kernel
*
* Send the given message to the netlink layer and receive response.
* Returns 0 on success, -1 on error. In case of error, no response
* buffer will be returned.
*/
static
int nlComm(struct nl_msg *nl_msg,
unsigned char **respbuf, unsigned int *respbuflen,
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
int nl_pid)
{
int rc = 0;
struct sockaddr_nl nladdr = {
.nl_family = AF_NETLINK,
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
.nl_pid = nl_pid,
.nl_groups = 0,
};
ssize_t nbytes;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
struct timeval tv = {
.tv_sec = NETLINK_ACK_TIMEOUT_S,
};
fd_set readfds;
int fd;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
int n;
struct nlmsghdr *nlmsg = nlmsg_hdr(nl_msg);
struct nl_handle *nlhandle = nl_handle_alloc();
if (!nlhandle) {
virReportSystemError(errno,
"%s", _("cannot allocate nlhandle for netlink"));
return -1;
}
if (nl_connect(nlhandle, NETLINK_ROUTE) < 0) {
virReportSystemError(errno,
"%s", _("cannot connect to netlink socket"));
rc = -1;
goto err_exit;
}
nlmsg_set_dst(nl_msg, &nladdr);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
nlmsg->nlmsg_pid = getpid();
nbytes = nl_send_auto_complete(nlhandle, nl_msg);
if (nbytes < 0) {
virReportSystemError(errno,
"%s", _("cannot send to netlink socket"));
rc = -1;
goto err_exit;
}
fd = nl_socket_get_fd(nlhandle);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
FD_ZERO(&readfds);
FD_SET(fd, &readfds);
n = select(fd + 1, &readfds, NULL, NULL, &tv);
if (n <= 0) {
if (n < 0)
virReportSystemError(errno, "%s",
_("error in select call"));
if (n == 0)
virReportSystemError(ETIMEDOUT, "%s",
_("no valid netlink response was received"));
rc = -1;
goto err_exit;
}
*respbuflen = nl_recv(nlhandle, &nladdr, respbuf, NULL);
if (*respbuflen <= 0) {
virReportSystemError(errno,
"%s", _("nl_recv failed"));
rc = -1;
}
err_exit:
if (rc == -1) {
VIR_FREE(*respbuf);
*respbuf = NULL;
*respbuflen = 0;
}
nl_handle_destroy(nlhandle);
return rc;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
# if WITH_MACVTAP
static int
link_add(const char *type,
const unsigned char *macaddress, int macaddrsize,
const char *ifname,
const char *srcdev,
uint32_t macvlan_mode,
int *retry)
{
int rc = 0;
struct nlmsghdr *resp;
struct nlmsgerr *err;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
struct ifinfomsg ifinfo = { .ifi_family = AF_UNSPEC };
int ifindex;
unsigned char *recvbuf = NULL;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
unsigned int recvbuflen;
struct nl_msg *nl_msg;
struct nlattr *linkinfo, *info_data;
if (ifaceGetIndex(true, srcdev, &ifindex) != 0)
return -1;
*retry = 0;
nl_msg = nlmsg_alloc_simple(RTM_NEWLINK,
NLM_F_REQUEST | NLM_F_CREATE | NLM_F_EXCL);
if (!nl_msg) {
virReportOOMError();
return -1;
}
if (nlmsg_append(nl_msg, &ifinfo, sizeof(ifinfo), NLMSG_ALIGNTO) < 0)
goto buffer_too_small;
if (nla_put_u32(nl_msg, IFLA_LINK, ifindex) < 0)
goto buffer_too_small;
if (nla_put(nl_msg, IFLA_ADDRESS, macaddrsize, macaddress) < 0)
goto buffer_too_small;
if (ifname &&
nla_put(nl_msg, IFLA_IFNAME, strlen(ifname)+1, ifname) < 0)
goto buffer_too_small;
if (!(linkinfo = nla_nest_start(nl_msg, IFLA_LINKINFO)))
goto buffer_too_small;
if (nla_put(nl_msg, IFLA_INFO_KIND, strlen(type), type) < 0)
goto buffer_too_small;
if (macvlan_mode > 0) {
if (!(info_data = nla_nest_start(nl_msg, IFLA_INFO_DATA)))
goto buffer_too_small;
if (nla_put(nl_msg, IFLA_MACVLAN_MODE, sizeof(macvlan_mode),
&macvlan_mode) < 0)
goto buffer_too_small;
nla_nest_end(nl_msg, info_data);
}
nla_nest_end(nl_msg, linkinfo);
if (nlComm(nl_msg, &recvbuf, &recvbuflen, 0) < 0) {
rc = -1;
goto err_exit;
}
if (recvbuflen < NLMSG_LENGTH(0) || recvbuf == NULL)
goto malformed_resp;
resp = (struct nlmsghdr *)recvbuf;
switch (resp->nlmsg_type) {
case NLMSG_ERROR:
err = (struct nlmsgerr *)NLMSG_DATA(resp);
if (resp->nlmsg_len < NLMSG_LENGTH(sizeof(*err)))
goto malformed_resp;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
switch (err->error) {
case 0:
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
break;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
case -EEXIST:
*retry = 1;
rc = -1;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
break;
default:
virReportSystemError(-err->error,
_("error creating %s type of interface"),
type);
rc = -1;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
break;
case NLMSG_DONE:
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
break;
default:
goto malformed_resp;
}
err_exit:
nlmsg_free(nl_msg);
VIR_FREE(recvbuf);
return rc;
malformed_resp:
nlmsg_free(nl_msg);
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("malformed netlink response message"));
VIR_FREE(recvbuf);
return -1;
buffer_too_small:
nlmsg_free(nl_msg);
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("allocated netlink buffer is too small"));
return -1;
}
static int
link_del(const char *ifname)
{
int rc = 0;
struct nlmsghdr *resp;
struct nlmsgerr *err;
struct ifinfomsg ifinfo = { .ifi_family = AF_UNSPEC };
unsigned char *recvbuf = NULL;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
unsigned int recvbuflen;
struct nl_msg *nl_msg;
nl_msg = nlmsg_alloc_simple(RTM_DELLINK,
NLM_F_REQUEST | NLM_F_CREATE | NLM_F_EXCL);
if (!nl_msg) {
virReportOOMError();
return -1;
}
if (nlmsg_append(nl_msg, &ifinfo, sizeof(ifinfo), NLMSG_ALIGNTO) < 0)
goto buffer_too_small;
if (nla_put(nl_msg, IFLA_IFNAME, strlen(ifname)+1, ifname) < 0)
goto buffer_too_small;
if (nlComm(nl_msg, &recvbuf, &recvbuflen, 0) < 0) {
rc = -1;
goto err_exit;
}
if (recvbuflen < NLMSG_LENGTH(0) || recvbuf == NULL)
goto malformed_resp;
resp = (struct nlmsghdr *)recvbuf;
switch (resp->nlmsg_type) {
case NLMSG_ERROR:
err = (struct nlmsgerr *)NLMSG_DATA(resp);
if (resp->nlmsg_len < NLMSG_LENGTH(sizeof(*err)))
goto malformed_resp;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
if (err->error) {
virReportSystemError(-err->error,
_("error destroying %s interface"),
ifname);
rc = -1;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
break;
case NLMSG_DONE:
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
break;
default:
goto malformed_resp;
}
err_exit:
nlmsg_free(nl_msg);
VIR_FREE(recvbuf);
return rc;
malformed_resp:
nlmsg_free(nl_msg);
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("malformed netlink response message"));
VIR_FREE(recvbuf);
return -1;
buffer_too_small:
nlmsg_free(nl_msg);
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("allocated netlink buffer is too small"));
return -1;
}
/* Open the macvtap's tap device.
* @ifname: Name of the macvtap interface
* @retries : Number of retries in case udev for example may need to be
* waited for to create the tap chardev
* Returns negative value in case of error, the file descriptor otherwise.
*/
static
int openTap(const char *ifname,
int retries)
{
FILE *file;
char path[64];
int ifindex;
char tapname[50];
int tapfd;
if (snprintf(path, sizeof(path),
"/sys/class/net/%s/ifindex", ifname) >= sizeof(path)) {
virReportSystemError(errno,
"%s",
_("buffer for ifindex path is too small"));
return -1;
}
file = fopen(path, "r");
if (!file) {
virReportSystemError(errno,
_("cannot open macvtap file %s to determine "
"interface index"), path);
return -1;
}
if (fscanf(file, "%d", &ifindex) != 1) {
virReportSystemError(errno,
"%s",_("cannot determine macvtap's tap device "
"interface index"));
VIR_FORCE_FCLOSE(file);
return -1;
}
VIR_FORCE_FCLOSE(file);
if (snprintf(tapname, sizeof(tapname),
"/dev/tap%d", ifindex) >= sizeof(tapname)) {
virReportSystemError(errno,
"%s",
_("internal buffer for tap device is too small"));
return -1;
}
while (1) {
/* may need to wait for udev to be done */
tapfd = open(tapname, O_RDWR);
if (tapfd < 0 && retries > 0) {
retries--;
usleep(20000);
continue;
}
break;
}
if (tapfd < 0)
virReportSystemError(errno,
_("cannot open macvtap tap device %s"),
tapname);
return tapfd;
}
static uint32_t
macvtapModeFromInt(enum virDomainNetdevMacvtapType mode)
{
switch (mode) {
case VIR_DOMAIN_NETDEV_MACVTAP_MODE_PRIVATE:
return MACVLAN_MODE_PRIVATE;
case VIR_DOMAIN_NETDEV_MACVTAP_MODE_BRIDGE:
return MACVLAN_MODE_BRIDGE;
case VIR_DOMAIN_NETDEV_MACVTAP_MODE_VEPA:
default:
return MACVLAN_MODE_VEPA;
}
}
/**
* configMacvtapTap:
* @tapfd: file descriptor of the macvtap tap
* @vnet_hdr: 1 to enable IFF_VNET_HDR, 0 to disable it
*
* Returns 0 on success, -1 in case of fatal error, error code otherwise.
*
* Turn the IFF_VNET_HDR flag, if requested and available, make sure
* it's off in the other cases.
* A fatal error is defined as the VNET_HDR flag being set but it cannot
* be turned off for some reason. This is reported with -1. Other fatal
* error is not being able to read the interface flags. In that case the
* macvtap device should not be used.
*/
static int
configMacvtapTap(int tapfd, int vnet_hdr)
{
unsigned int features;
struct ifreq ifreq;
short new_flags = 0;
int rc_on_fail = 0;
const char *errmsg = NULL;
memset(&ifreq, 0, sizeof(ifreq));
if (ioctl(tapfd, TUNGETIFF, &ifreq) < 0) {
virReportSystemError(errno, "%s",
_("cannot get interface flags on macvtap tap"));
return -1;
}
new_flags = ifreq.ifr_flags;
if ((ifreq.ifr_flags & IFF_VNET_HDR) && !vnet_hdr) {
new_flags = ifreq.ifr_flags & ~IFF_VNET_HDR;
rc_on_fail = -1;
errmsg = _("cannot clean IFF_VNET_HDR flag on macvtap tap");
} else if ((ifreq.ifr_flags & IFF_VNET_HDR) == 0 && vnet_hdr) {
if (ioctl(tapfd, TUNGETFEATURES, &features) != 0)
return errno;
if ((features & IFF_VNET_HDR)) {
new_flags = ifreq.ifr_flags | IFF_VNET_HDR;
errmsg = _("cannot set IFF_VNET_HDR flag on macvtap tap");
}
}
if (new_flags != ifreq.ifr_flags) {
ifreq.ifr_flags = new_flags;
if (ioctl(tapfd, TUNSETIFF, &ifreq) < 0) {
virReportSystemError(errno, "%s", errmsg);
return rc_on_fail;
}
}
return 0;
}
/**
* openMacvtapTap:
* Create an instance of a macvtap device and open its tap character
* device.
* @tgifname: Interface name that the macvtap is supposed to have. May
* be NULL if this function is supposed to choose a name
* @macaddress: The MAC address for the macvtap device
* @linkdev: The interface name of the NIC to connect to the external bridge
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
* @mode: int describing the mode for 'bridge', 'vepa' or 'private'.
* @vnet_hdr: 1 to enable IFF_VNET_HDR, 0 to disable it
* @vmuuid: The UUID of the VM the macvtap belongs to
* @virtPortProfile: pointer to object holding the virtual port profile data
* @res_ifname: Pointer to a string pointer where the actual name of the
* interface will be stored into if everything succeeded. It is up
* to the caller to free the string.
*
* Returns file descriptor of the tap device in case of success,
* negative value otherwise with error reported.
*
*/
int
openMacvtapTap(const char *tgifname,
const unsigned char *macaddress,
const char *linkdev,
int mode,
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
int vnet_hdr,
const unsigned char *vmuuid,
virVirtualPortProfileParamsPtr virtPortProfile,
char **res_ifname,
enum virVMOperationType vmOp)
{
const char *type = "macvtap";
int c, rc;
char ifname[IFNAMSIZ];
int retries, do_retry = 0;
uint32_t macvtapMode = macvtapModeFromInt(mode);
const char *cr_ifname;
int ifindex;
*res_ifname = NULL;
VIR_DEBUG("%s: VM OPERATION: %s", __FUNCTION__, virVMOperationTypeToString(vmOp));
if (tgifname) {
if(ifaceGetIndex(false, tgifname, &ifindex) == 0) {
if (STRPREFIX(tgifname,
MACVTAP_NAME_PREFIX)) {
goto create_name;
}
virReportSystemError(errno,
_("Interface %s already exists"), tgifname);
return -1;
}
cr_ifname = tgifname;
rc = link_add(type, macaddress, 6, tgifname, linkdev,
macvtapMode, &do_retry);
if (rc)
return -1;
} else {
create_name:
retries = 5;
for (c = 0; c < 8192; c++) {
snprintf(ifname, sizeof(ifname), MACVTAP_NAME_PATTERN, c);
if (ifaceGetIndex(false, ifname, &ifindex) == ENODEV) {
rc = link_add(type, macaddress, 6, ifname, linkdev,
macvtapMode, &do_retry);
if (rc == 0)
break;
if (do_retry && --retries)
continue;
return -1;
}
}
cr_ifname = ifname;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
if (vpAssociatePortProfileId(cr_ifname,
macaddress,
linkdev,
virtPortProfile,
vmuuid, vmOp) != 0) {
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
rc = -1;
goto link_del_exit;
}
rc = ifaceUp(cr_ifname);
if (rc != 0) {
virReportSystemError(errno,
_("cannot 'up' interface %s -- another "
"macvtap device may be 'up' and have the same "
"MAC address"),
cr_ifname);
rc = -1;
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
goto disassociate_exit;
}
rc = openTap(cr_ifname, 10);
if (rc >= 0) {
if (configMacvtapTap(rc, vnet_hdr) < 0) {
VIR_FORCE_CLOSE(rc); /* sets rc to -1 */
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
goto disassociate_exit;
}
*res_ifname = strdup(cr_ifname);
} else
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
goto disassociate_exit;
return rc;
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
disassociate_exit:
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
vpDisassociatePortProfileId(cr_ifname,
macaddress,
linkdev,
virtPortProfile,
vmOp);
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
link_del_exit:
link_del(cr_ifname);
return rc;
}
/**
* delMacvtap:
* @ifname : The name of the macvtap interface
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
* @linkdev: The interface name of the NIC to connect to the external bridge
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
* @virtPortProfile: pointer to object holding the virtual port profile data
*
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
* Delete an interface given its name. Disassociate
* it with the switch if port profile parameters
* were provided.
*/
void
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
delMacvtap(const char *ifname,
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
const unsigned char *macaddr,
const char *linkdev,
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
virVirtualPortProfileParamsPtr virtPortProfile)
{
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
if (ifname) {
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
vpDisassociatePortProfileId(ifname, macaddr,
linkdev,
virtPortProfile,
VIR_VM_OP_DESTROY);
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
link_del(ifname);
}
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
# endif /* WITH_MACVTAP */
# ifdef IFLA_PORT_MAX
static struct nla_policy ifla_policy[IFLA_MAX + 1] =
{
[IFLA_VF_PORTS] = { .type = NLA_NESTED },
};
static struct nla_policy ifla_port_policy[IFLA_PORT_MAX + 1] =
{
[IFLA_PORT_RESPONSE] = { .type = NLA_U16 },
};
static uint32_t
getLldpadPid(void) {
int fd;
uint32_t pid = 0;
fd = open(LLDPAD_PID_FILE, O_RDONLY);
if (fd >= 0) {
char buffer[10];
if (saferead(fd, buffer, sizeof(buffer)) <= sizeof(buffer)) {
unsigned int res;
char *endptr;
if (virStrToLong_ui(buffer, &endptr, 10, &res) == 0
&& (*endptr == '\0' || c_isspace(*endptr))
&& res != 0) {
pid = res;
} else {
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("error parsing pid of lldpad"));
}
}
} else {
virReportSystemError(errno,
_("Error opening file %s"), LLDPAD_PID_FILE);
}
VIR_FORCE_CLOSE(fd);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
return pid;
}
static int
link_dump(bool nltarget_kernel, const char *ifname, int ifindex,
struct nlattr **tb, unsigned char **recvbuf)
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
{
int rc = 0;
struct nlmsghdr *resp;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
struct nlmsgerr *err;
struct ifinfomsg ifinfo = {
.ifi_family = AF_UNSPEC,
.ifi_index = ifindex
};
unsigned int recvbuflen;
uint32_t pid = 0;
struct nl_msg *nl_msg;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
*recvbuf = NULL;
nl_msg = nlmsg_alloc_simple(RTM_GETLINK, NLM_F_REQUEST);
if (!nl_msg) {
virReportOOMError();
return -1;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
if (nlmsg_append(nl_msg, &ifinfo, sizeof(ifinfo), NLMSG_ALIGNTO) < 0)
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
goto buffer_too_small;
if (ifindex < 0 && ifname) {
if (nla_put(nl_msg, IFLA_IFNAME, strlen(ifname)+1, ifname) < 0)
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
goto buffer_too_small;
}
if (!nltarget_kernel) {
pid = getLldpadPid();
if (pid == 0) {
rc = -1;
goto err_exit;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
}
if (nlComm(nl_msg, recvbuf, &recvbuflen, pid) < 0) {
rc = -1;
goto err_exit;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
if (recvbuflen < NLMSG_LENGTH(0) || *recvbuf == NULL)
goto malformed_resp;
resp = (struct nlmsghdr *)*recvbuf;
switch (resp->nlmsg_type) {
case NLMSG_ERROR:
err = (struct nlmsgerr *)NLMSG_DATA(resp);
if (resp->nlmsg_len < NLMSG_LENGTH(sizeof(*err)))
goto malformed_resp;
if (err->error) {
virReportSystemError(-err->error,
_("error dumping %s (%d) interface"),
ifname, ifindex);
rc = -1;
}
break;
case GENL_ID_CTRL:
case NLMSG_DONE:
if (nlmsg_parse(resp, sizeof(struct ifinfomsg),
tb, IFLA_MAX, ifla_policy)) {
goto malformed_resp;
}
break;
default:
goto malformed_resp;
}
if (rc != 0)
VIR_FREE(*recvbuf);
err_exit:
nlmsg_free(nl_msg);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
return rc;
malformed_resp:
nlmsg_free(nl_msg);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("malformed netlink response message"));
VIR_FREE(*recvbuf);
return -1;
buffer_too_small:
nlmsg_free(nl_msg);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("allocated netlink buffer is too small"));
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
return -1;
}
/**
* ifaceGetNthParent
*
* @ifindex : the index of the interface or -1 if ifname is given
* @ifname : the name of the interface; ignored if ifindex is valid
* @nthParent : the nth parent interface to get
* @parent_ifindex : pointer to int
* @parent_ifname : pointer to buffer of size IFNAMSIZ
* @nth : the nth parent that is actually returned; if for example eth0.100
* was given and the 100th parent is to be returned, then eth0 will
* most likely be returned with nth set to 1 since the chain does
* not have more interfaces
*
* Get the nth parent interface of the given interface. 0 is the interface
* itself.
*
* Return 0 on success, != 0 otherwise
*/
static int
ifaceGetNthParent(int ifindex, const char *ifname, unsigned int nthParent,
int *parent_ifindex, char *parent_ifname,
unsigned int *nth)
{
int rc;
struct nlattr *tb[IFLA_MAX + 1] = { NULL, };
unsigned char *recvbuf = NULL;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
bool end = false;
unsigned int i = 0;
*nth = 0;
if (ifindex <= 0 && ifaceGetIndex(true, ifname, &ifindex) != 0)
return 1;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
while (!end && i <= nthParent) {
rc = link_dump(true, ifname, ifindex, tb, &recvbuf);
if (rc)
break;
if (tb[IFLA_IFNAME]) {
if (!virStrcpy(parent_ifname, (char*)RTA_DATA(tb[IFLA_IFNAME]),
IFNAMSIZ)) {
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("buffer for root interface name is too small"));
VIR_FREE(recvbuf);
return 1;
}
*parent_ifindex = ifindex;
}
if (tb[IFLA_LINK]) {
ifindex = *(int *)RTA_DATA(tb[IFLA_LINK]);
ifname = NULL;
} else
end = true;
VIR_FREE(recvbuf);
i++;
}
if (nth)
*nth = i - 1;
return rc;
}
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
/**
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
* getPortProfileStatus
*
* tb: top level netlink response attributes + values
* vf: The virtual function used in the request
* instanceId: instanceId of the interface (vm uuid in case of 802.1Qbh)
* is8021Qbg: whether this function is call for 8021Qbg
* status: pointer to a uint16 where the status will be written into
*
* Get the status from the IFLA_PORT_RESPONSE field; Returns 0 in
* case of success, != 0 otherwise with error having been reported
*/
static int
getPortProfileStatus(struct nlattr **tb, int32_t vf,
const unsigned char *instanceId,
bool nltarget_kernel,
bool is8021Qbg,
uint16_t *status)
{
int rc = 1;
const char *msg = NULL;
struct nlattr *tb_port[IFLA_PORT_MAX + 1] = { NULL, };
if (vf == PORT_SELF_VF && nltarget_kernel) {
if (tb[IFLA_PORT_SELF]) {
if (nla_parse_nested(tb_port, IFLA_PORT_MAX, tb[IFLA_PORT_SELF],
ifla_port_policy)) {
msg = _("error parsing IFLA_PORT_SELF part");
goto err_exit;
}
} else {
msg = _("IFLA_PORT_SELF is missing");
goto err_exit;
}
} else {
if (tb[IFLA_VF_PORTS]) {
int rem;
bool found = false;
struct nlattr *tb_vf_ports = { NULL, };
nla_for_each_nested(tb_vf_ports, tb[IFLA_VF_PORTS], rem) {
if (nla_type(tb_vf_ports) != IFLA_VF_PORT) {
msg = _("error while iterating over IFLA_VF_PORTS part");
goto err_exit;
}
if (nla_parse_nested(tb_port, IFLA_PORT_MAX, tb_vf_ports,
ifla_port_policy)) {
msg = _("error parsing IFLA_VF_PORT part");
goto err_exit;
}
if (instanceId &&
tb_port[IFLA_PORT_INSTANCE_UUID] &&
!memcmp(instanceId,
(unsigned char *)
RTA_DATA(tb_port[IFLA_PORT_INSTANCE_UUID]),
VIR_UUID_BUFLEN) &&
tb_port[IFLA_PORT_VF] &&
vf == *(uint32_t *)RTA_DATA(tb_port[IFLA_PORT_VF])) {
found = true;
break;
}
}
if (!found) {
msg = _("Could not find netlink response with "
"expected parameters");
goto err_exit;
}
} else {
msg = _("IFLA_VF_PORTS is missing");
goto err_exit;
}
}
if (tb_port[IFLA_PORT_RESPONSE]) {
*status = *(uint16_t *)RTA_DATA(tb_port[IFLA_PORT_RESPONSE]);
rc = 0;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
} else {
if (is8021Qbg) {
/* no in-progress here; may be missing */
*status = PORT_PROFILE_RESPONSE_INPROGRESS;
rc = 0;
} else {
msg = _("no IFLA_PORT_RESPONSE found in netlink message");
goto err_exit;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
}
err_exit:
if (msg)
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s", msg);
return rc;
}
static int
doPortProfileOpSetLink(bool nltarget_kernel,
const char *ifname, int ifindex,
const unsigned char *macaddr,
int vlanid,
const char *profileId,
struct ifla_port_vsi *portVsi,
const unsigned char *instanceId,
const unsigned char *hostUUID,
int32_t vf,
uint8_t op)
{
int rc = 0;
struct nlmsghdr *resp;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
struct nlmsgerr *err;
struct ifinfomsg ifinfo = {
.ifi_family = AF_UNSPEC,
.ifi_index = ifindex,
};
unsigned char *recvbuf = NULL;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
unsigned int recvbuflen = 0;
uint32_t pid = 0;
struct nl_msg *nl_msg;
struct nlattr *vfports = NULL, *vfport;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
nl_msg = nlmsg_alloc_simple(RTM_SETLINK, NLM_F_REQUEST);
if (!nl_msg) {
virReportOOMError();
return -1;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
if (nlmsg_append(nl_msg, &ifinfo, sizeof(ifinfo), NLMSG_ALIGNTO) < 0)
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
goto buffer_too_small;
if (ifname &&
nla_put(nl_msg, IFLA_IFNAME, strlen(ifname)+1, ifname) < 0)
goto buffer_too_small;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
if (macaddr || vlanid >= 0) {
struct nlattr *vfinfolist, *vfinfo;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
if (!(vfinfolist = nla_nest_start(nl_msg, IFLA_VFINFO_LIST)))
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
goto buffer_too_small;
if (!(vfinfo = nla_nest_start(nl_msg, IFLA_VF_INFO)))
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
goto buffer_too_small;
if (macaddr) {
struct ifla_vf_mac ifla_vf_mac = {
.vf = vf,
.mac = { 0, },
};
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
memcpy(ifla_vf_mac.mac, macaddr, 6);
if (nla_put(nl_msg, IFLA_VF_MAC, sizeof(ifla_vf_mac),
&ifla_vf_mac) < 0)
goto buffer_too_small;
}
if (vlanid >= 0) {
struct ifla_vf_vlan ifla_vf_vlan = {
.vf = vf,
.vlan = vlanid,
.qos = 0,
};
if (nla_put(nl_msg, IFLA_VF_VLAN, sizeof(ifla_vf_vlan),
&ifla_vf_vlan) < 0)
goto buffer_too_small;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
nla_nest_end(nl_msg, vfinfo);
nla_nest_end(nl_msg, vfinfolist);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
}
if (vf == PORT_SELF_VF && nltarget_kernel) {
if (!(vfport = nla_nest_start(nl_msg, IFLA_PORT_SELF)))
goto buffer_too_small;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
} else {
if (!(vfports = nla_nest_start(nl_msg, IFLA_VF_PORTS)))
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
goto buffer_too_small;
/* begin nesting vfports */
if (!(vfport = nla_nest_start(nl_msg, IFLA_VF_PORT)))
goto buffer_too_small;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
}
if (profileId) {
if (nla_put(nl_msg, IFLA_PORT_PROFILE, strlen(profileId) + 1,
profileId) < 0)
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
goto buffer_too_small;
}
if (portVsi) {
if (nla_put(nl_msg, IFLA_PORT_VSI_TYPE, sizeof(*portVsi),
portVsi) < 0)
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
goto buffer_too_small;
}
if (instanceId) {
if (nla_put(nl_msg, IFLA_PORT_INSTANCE_UUID, VIR_UUID_BUFLEN,
instanceId) < 0)
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
goto buffer_too_small;
}
if (hostUUID) {
if (nla_put(nl_msg, IFLA_PORT_HOST_UUID, VIR_UUID_BUFLEN,
hostUUID) < 0)
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
goto buffer_too_small;
}
if (vf != PORT_SELF_VF) {
if (nla_put(nl_msg, IFLA_PORT_VF, sizeof(vf), &vf) < 0)
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
goto buffer_too_small;
}
if (nla_put(nl_msg, IFLA_PORT_REQUEST, sizeof(op), &op) < 0)
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
goto buffer_too_small;
/* end nesting of vport */
nla_nest_end(nl_msg, vfport);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
if (vfports) {
/* end nesting of vfports */
nla_nest_end(nl_msg, vfports);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
}
if (!nltarget_kernel) {
pid = getLldpadPid();
if (pid == 0) {
rc = -1;
goto err_exit;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
}
if (nlComm(nl_msg, &recvbuf, &recvbuflen, pid) < 0) {
rc = -1;
goto err_exit;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
if (recvbuflen < NLMSG_LENGTH(0) || recvbuf == NULL)
goto malformed_resp;
resp = (struct nlmsghdr *)recvbuf;
switch (resp->nlmsg_type) {
case NLMSG_ERROR:
err = (struct nlmsgerr *)NLMSG_DATA(resp);
if (resp->nlmsg_len < NLMSG_LENGTH(sizeof(*err)))
goto malformed_resp;
if (err->error) {
virReportSystemError(-err->error,
_("error during virtual port configuration of ifindex %d"),
ifindex);
rc = -1;
}
break;
case NLMSG_DONE:
break;
default:
goto malformed_resp;
}
err_exit:
nlmsg_free(nl_msg);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
VIR_FREE(recvbuf);
return rc;
malformed_resp:
nlmsg_free(nl_msg);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("malformed netlink response message"));
VIR_FREE(recvbuf);
return -1;
buffer_too_small:
nlmsg_free(nl_msg);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("allocated netlink buffer is too small"));
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
return -1;
}
static int
doPortProfileOpCommon(bool nltarget_kernel,
const char *ifname, int ifindex,
const unsigned char *macaddr,
int vlanid,
const char *profileId,
struct ifla_port_vsi *portVsi,
const unsigned char *instanceId,
const unsigned char *hostUUID,
int32_t vf,
uint8_t op)
{
int rc;
unsigned char *recvbuf = NULL;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
struct nlattr *tb[IFLA_MAX + 1] = { NULL , };
int repeats = STATUS_POLL_TIMEOUT_USEC / STATUS_POLL_INTERVL_USEC;
uint16_t status = 0;
bool is8021Qbg = (profileId == NULL);
rc = doPortProfileOpSetLink(nltarget_kernel,
ifname, ifindex,
macaddr,
vlanid,
profileId,
portVsi,
instanceId,
hostUUID,
vf,
op);
if (rc) {
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("sending of PortProfileRequest failed."));
return rc;
}
while (--repeats >= 0) {
rc = link_dump(nltarget_kernel, NULL, ifindex, tb, &recvbuf);
if (rc)
goto err_exit;
rc = getPortProfileStatus(tb, vf, instanceId, nltarget_kernel,
is8021Qbg, &status);
if (rc)
goto err_exit;
if (status == PORT_PROFILE_RESPONSE_SUCCESS ||
status == PORT_VDP_RESPONSE_SUCCESS) {
break;
} else if (status == PORT_PROFILE_RESPONSE_INPROGRESS) {
/* keep trying... */
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
} else {
virReportSystemError(EINVAL,
_("error %d during port-profile setlink on "
"interface %s (%d)"),
status, ifname, ifindex);
rc = 1;
break;
}
usleep(STATUS_POLL_INTERVL_USEC);
VIR_FREE(recvbuf);
}
if (status == PORT_PROFILE_RESPONSE_INPROGRESS) {
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("port-profile setlink timed out"));
rc = -ETIMEDOUT;
}
err_exit:
VIR_FREE(recvbuf);
return rc;
}
# endif /* IFLA_PORT_MAX */
# ifdef IFLA_VF_PORT_MAX
static int
getPhysdevAndVlan(const char *ifname, int *root_ifindex, char *root_ifname,
int *vlanid)
{
int ret;
unsigned int nth;
int ifindex = -1;
*vlanid = -1;
while (1) {
if ((ret = ifaceGetNthParent(ifindex, ifname, 1,
root_ifindex, root_ifname, &nth)))
return ret;
if (nth == 0)
break;
if (*vlanid == -1) {
if (ifaceGetVlanID(root_ifname, vlanid))
*vlanid = -1;
}
ifindex = *root_ifindex;
ifname = NULL;
}
return 0;
}
# endif
static int
doPortProfileOp8021Qbg(const char *ifname,
const unsigned char *macaddr,
const virVirtualPortProfileParamsPtr virtPort,
enum virVirtualPortOp virtPortOp)
{
int rc;
# ifndef IFLA_VF_PORT_MAX
(void)ifname;
(void)macaddr;
(void)virtPort;
(void)virtPortOp;
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("Kernel VF Port support was missing at compile time."));
rc = 1;
# else /* IFLA_VF_PORT_MAX */
int op = PORT_REQUEST_ASSOCIATE;
struct ifla_port_vsi portVsi = {
.vsi_mgr_id = virtPort->u.virtPort8021Qbg.managerID,
.vsi_type_version = virtPort->u.virtPort8021Qbg.typeIDVersion,
};
bool nltarget_kernel = false;
int vlanid;
int physdev_ifindex = 0;
char physdev_ifname[IFNAMSIZ] = { 0, };
int vf = PORT_SELF_VF;
if (getPhysdevAndVlan(ifname, &physdev_ifindex, physdev_ifname,
&vlanid) != 0) {
rc = 1;
goto err_exit;
}
if (vlanid < 0)
vlanid = 0;
portVsi.vsi_type_id[2] = virtPort->u.virtPort8021Qbg.typeID >> 16;
portVsi.vsi_type_id[1] = virtPort->u.virtPort8021Qbg.typeID >> 8;
portVsi.vsi_type_id[0] = virtPort->u.virtPort8021Qbg.typeID;
switch (virtPortOp) {
case PREASSOCIATE:
op = PORT_REQUEST_PREASSOCIATE;
break;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
case ASSOCIATE:
op = PORT_REQUEST_ASSOCIATE;
break;
case DISASSOCIATE:
op = PORT_REQUEST_DISASSOCIATE;
break;
default:
macvtapError(VIR_ERR_INTERNAL_ERROR,
_("operation type %d not supported"), virtPortOp);
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
rc = 1;
goto err_exit;
}
rc = doPortProfileOpCommon(nltarget_kernel,
physdev_ifname, physdev_ifindex,
macaddr,
vlanid,
NULL,
&portVsi,
virtPort->u.virtPort8021Qbg.instanceID,
NULL,
vf,
op);
err_exit:
# endif /* IFLA_VF_PORT_MAX */
return rc;
}
# ifdef IFLA_VF_PORT_MAX
static int
getPhysfn(const char *linkdev,
int32_t *vf,
char **physfndev)
{
int rc = 0;
bool virtfn = false;
if (virtfn) {
/* XXX: if linkdev is SR-IOV VF, then set vf = VF index */
/* XXX: and set linkdev = PF device */
/* XXX: need to use get_physical_function_linux() or */
/* XXX: something like that to get PF */
/* XXX: device and figure out VF index */
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
rc = 1;
} else {
/* Not SR-IOV VF: physfndev is linkdev and VF index
* refers to linkdev self
*/
*vf = PORT_SELF_VF;
*physfndev = (char *)linkdev;
}
return rc;
}
# endif /* IFLA_VF_PORT_MAX */
static int
doPortProfileOp8021Qbh(const char *ifname,
const unsigned char *macaddr,
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
const virVirtualPortProfileParamsPtr virtPort,
const unsigned char *vm_uuid,
enum virVirtualPortOp virtPortOp)
{
int rc;
# ifndef IFLA_VF_PORT_MAX
(void)ifname;
(void)macaddr;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
(void)virtPort;
(void)vm_uuid;
(void)virtPortOp;
macvtapError(VIR_ERR_INTERNAL_ERROR, "%s",
_("Kernel VF Port support was missing at compile time."));
rc = 1;
# else /* IFLA_VF_PORT_MAX */
char *physfndev;
unsigned char hostuuid[VIR_UUID_BUFLEN];
int32_t vf;
bool nltarget_kernel = true;
int ifindex;
int vlanid = -1;
rc = getPhysfn(ifname, &vf, &physfndev);
if (rc)
goto err_exit;
if (ifaceGetIndex(true, physfndev, &ifindex) != 0) {
rc = 1;
goto err_exit;
}
switch (virtPortOp) {
case ASSOCIATE:
rc = virGetHostUUID(hostuuid);
if (rc)
goto err_exit;
rc = doPortProfileOpCommon(nltarget_kernel, NULL, ifindex,
macaddr,
vlanid,
virtPort->u.virtPort8021Qbh.profileID,
NULL,
vm_uuid,
hostuuid,
vf,
PORT_REQUEST_ASSOCIATE);
if (rc == -ETIMEDOUT)
/* Association timed out, disassociate */
doPortProfileOpCommon(nltarget_kernel, NULL, ifindex,
NULL,
vlanid,
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
NULL,
NULL,
NULL,
NULL,
vf,
PORT_REQUEST_DISASSOCIATE);
break;
case DISASSOCIATE:
rc = doPortProfileOpCommon(nltarget_kernel, NULL, ifindex,
NULL,
vlanid,
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
NULL,
NULL,
NULL,
NULL,
vf,
PORT_REQUEST_DISASSOCIATE);
break;
default:
macvtapError(VIR_ERR_INTERNAL_ERROR,
_("operation type %d not supported"), virtPortOp);
rc = 1;
}
err_exit:
# endif /* IFLA_VF_PORT_MAX */
return rc;
}
/**
* vpAssociatePortProfile
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
*
* @macvtap_ifname: The name of the macvtap device
* @virtPort: pointer to the object holding port profile parameters
* @vmuuid : the UUID of the virtual machine
* @vmOp : The VM operation (i.e., create, no-op)
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
*
* Associate a port on a swtich with a profile. This function
* may notify a kernel driver or an external daemon to run
* the setup protocol. If profile parameters were not supplied
* by the user, then this function returns without doing
* anything.
*
* Returns 0 in case of success, != 0 otherwise with error
* having been reported.
*/
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
int
vpAssociatePortProfileId(const char *macvtap_ifname,
const unsigned char *macvtap_macaddr,
const char *linkdev,
const virVirtualPortProfileParamsPtr virtPort,
const unsigned char *vmuuid,
enum virVMOperationType vmOp)
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
{
int rc = 0;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
VIR_DEBUG("Associating port profile '%p' on link device '%s'",
virtPort, macvtap_ifname);
VIR_DEBUG("%s: VM OPERATION: %s", __FUNCTION__, virVMOperationTypeToString(vmOp));
if (vmOp == VIR_VM_OP_NO_OP)
return 0;
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
switch (virtPort->virtPortType) {
case VIR_VIRTUALPORT_NONE:
case VIR_VIRTUALPORT_TYPE_LAST:
break;
case VIR_VIRTUALPORT_8021QBG:
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
rc = doPortProfileOp8021Qbg(macvtap_ifname, macvtap_macaddr,
virtPort,
(vmOp == VIR_VM_OP_MIGRATE_IN_START)
? PREASSOCIATE
: ASSOCIATE);
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
break;
case VIR_VIRTUALPORT_8021QBH:
/* avoid associating twice */
if (vmOp != VIR_VM_OP_MIGRATE_IN_FINISH)
rc = doPortProfileOp8021Qbh(linkdev, macvtap_macaddr,
virtPort, vmuuid, ASSOCIATE);
if (vmOp != VIR_VM_OP_MIGRATE_IN_START && !rc)
ifaceUp(linkdev);
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
break;
}
return rc;
}
/**
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
* vpDisassociatePortProfile
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
*
* @macvtap_ifname: The name of the macvtap device
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
* @macvtap_macaddr : The MAC address of the macvtap
* @linkdev: The link device in case of macvtap
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
* @virtPort: point to object holding port profile parameters
*
* Returns 0 in case of success, != 0 otherwise with error
* having been reported.
*/
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
int
vpDisassociatePortProfileId(const char *macvtap_ifname,
const unsigned char *macvtap_macaddr,
const char *linkdev,
const virVirtualPortProfileParamsPtr virtPort,
enum virVMOperationType vmOp)
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
{
int rc = 0;
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
VIR_DEBUG("Disassociating port profile id '%p' on link device '%s' ",
virtPort, macvtap_ifname);
VIR_DEBUG("%s: VM OPERATION: %s", __FUNCTION__, virVMOperationTypeToString(vmOp));
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
switch (virtPort->virtPortType) {
case VIR_VIRTUALPORT_NONE:
case VIR_VIRTUALPORT_TYPE_LAST:
break;
case VIR_VIRTUALPORT_8021QBG:
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
rc = doPortProfileOp8021Qbg(macvtap_ifname, macvtap_macaddr,
virtPort, DISASSOCIATE);
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
break;
case VIR_VIRTUALPORT_8021QBH:
/* avoid disassociating twice */
if (vmOp == VIR_VM_OP_MIGRATE_IN_FINISH)
break;
ifaceDown(linkdev);
rc = doPortProfileOp8021Qbh(linkdev, macvtap_macaddr,
virtPort, NULL, DISASSOCIATE);
vepa: parsing for 802.1Qb{g|h} XML This patch parses the following two XML descriptions, one for 802.1Qbg and one for 802.1Qbh, and stores the data internally. The actual triggering of the switch setup protocol has not been implemented here but the relevant code to do that should go into the functions associatePortProfileId() and disassociatePortProfileId(). <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbg'> <parameters managerid='12' typeid='0x123456' typeidversion='1' instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/> </virtualport> <filterref filter='clean-traffic'/> </interface> <interface type='direct'> <source dev='eth0.100' mode='vepa'/> <model type='virtio'/> <virtualport type='802.1Qbh'> <parameters profileid='my_profile'/> </virtualport> </interface> I'd suggest to use this patch as a base for triggering the setup protocol with the 802.1Qb{g|h} switch. Several rounds of changes were made to this patch. The following is a list of these changes. - Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams as per Daniel Berrange's request - Addressing Daniel Berrange's comments: - removing macvtap.h's dependency on domain_conf.h by moving the virVirtualPortProfileDef structure into macvtap.h and not passing virtDomainNetDefPtr to any functions in macvtap.c - Addressed most of Chris Wright's comments: - indicating error in case virtualport XML node cannot be parsed properly - parsing hex and decimal numbers using virStrToLong_ui() with parameter '0' for base - tgifname (target interface name) variable wasn't necessary to pass to openMacvtapTap function anymore - assigning the virtual port data structure to the virDomainNetDef only if it was previously parsed - make sure that the error code returned by openMacvtapTap() is a negative n in case the associatePortProfileId() function failed. - renaming vsi in the XML to virtualport - replace all occurrences of vsi in the source as well - removing mode and MAC address parameters from the functions that will communicate with the hareware diretctly or indirectly - moving the associate and disassociate functions to the end of the file for subsequent patches to easier make them generally available for export - passing the macvtap interface name rather than the link device since this otherwise gives funny side effects when using netlink messages where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev all of a sudden gets the MAC address of the macvtap interface. - Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case we wanted to use hook scripts for the setup and so the setup doesn't fail here. - if instance ID UUID is not supplied it will automatically be generated - adapted schema to make instance ID UUID optional - added test case - parser and XML generator have been separated into their own functions so they can be re-used elsewhere (passthrough case for example) - Adapted XML parser and generator support the above shown type (802.1Qbg, 802.1Qbh). - Adapted schema to above XML - Adapted test XML to above XML - Passing through the VM's UUID which seems to be necessary for 802.1Qbh -- sorry no host UUID - adding virtual function ID to association function, in case it's necessary to use (for SR-IOV)
2010-05-25 21:37:00 +00:00
break;
}
return rc;
}
add 802.1Qbh and 802.1Qbg handling This patch that adds support for configuring 802.1Qbg and 802.1Qbh switches. The 802.1Qbh part has been successfully tested with real hardware. The 802.1Qbg part has only been tested with a (dummy) server that 'behaves' similarly to how we expect lldpad to 'behave'. The following changes were made during the development of this patch: - Merging Scott's v13-pre1 patch - Fixing endptr related bug while using virStrToLong_ui() pointed out by Jim Meyering - Addressing Jim Meyering's comments to v11 - requiring mac address to the vpDisassociateProfileId() function to pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched) - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid (hardcode as is hardcode alson in lldpad sources) - merging netlink send code for kernel target and user space target (lldpad) using one function nlComm() to send the messages - adding a select() after the sending and before the reading of the netlink response in case lldpad doesn't respond and so we don't hang - when reading the port status, in case of 802.1Qbg, no status may be received while things are 'in progress' and only at the end a status will be there. - when reading the port status, use the given instanceId and vf to pick the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS. - never sending nor parsing IFLA_PORT_SELF type of messages in the 802.1Qbg case - iterating over the elements in a IFLA_VF_PORTS to pick the right IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg) and reading the current status in IFLA_PORT_RESPONSE. - recycling a previous patch that adds functionality to interface.c to - get the vlan identifier on an interface - get the flags of an interface and some convenience function to check whether an interface is 'up' or not (not currently used here) - adding function to determine the root physical interface of an interface. For example if a macvtap is linked to eth0.100, it will find eth0. Also adding a function that finds the vlan on the 'way to the root physical interface' - conveying the root physical interface name and index in case of 802.1Qbg - conveying mac address of macvlan device and vlan identifier in IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ] to (future) lldpad via netlink - To enable build with --without-macvtap rename the [dis|]associatePortProfileId functions, prepend 'vp' before their name and make them non-static functions. - Renaming variable multicast to nltarget_kernel and inverting the logic - Addressing Jim Meyering's comments; this also touches existing code for example for correcting indentation of break statements or simplification of switch statements. - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses - 802.1Qbg part prepared for sending a RTM_SETLINK and getting processing status back plus a subsequent RTM_GETLINK to get IFLA_PORT_RESPONSE. Note: This interface for 802.1Qbg may still change - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid compiler warning when latest if_link.h isn't available - move from Stefan's 802.1Qb{g|h} XML v8 to v9 - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh - remove debug fprintfs - use virGetHostUUID (thanks Stefan!) - fix compile issue when latest if_link.h isn't available - change poll timeout to 10s, at 1/8 intervals - if polling times out, log msg and return -ETIMEDOUT - Add Stefan's code for getPortProfileStatus - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals: - if status indicates error, abort openMacvtapTap - if status indicates success, exit polling - if status is "in-progress" after 2 secs of polling, exit polling loop silently, without error My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete. I've tested using the recent kernel updates for VF_PORT netlink msgs and enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several direct interfaces, each configured with a port-profile per the XML. VM-to-VM, and VM-to-external work as expected. VM-to-VM on same host (using same NIC) works same as VM-to-VM where VMs are on diff hosts. I'm able to change settings on the port-profile while the VM is running to change the virtual port behaviour. For example, adjusting a QoS setting like rate limit. All VMs with interfaces using that port-profile immediatly see the effect of the change to the port-profile. I don't have a SR-IOV device to test so source dev is a non-SR-IOV device, but most of the code paths include support for specifing the source dev and VF index. We'll need to complete this by discovering the PF given the VF linkdev. Once we have the PF, we'll also have the VF index. All this info- mation is available from sysfs.
2010-06-03 01:35:22 +00:00
#endif /* WITH_MACVTAP || WITH_VIRTUALPORT */
VIR_ENUM_IMPL(virVMOperation, VIR_VM_OP_LAST,
"create",
"save",
"restore",
"destroy",
"migrate out",
"migrate in start",
"migrate in finish",
"no-op")