libvirt/tests/xmconfigdata/test-paravirt-net-vifname.xml

37 lines
1.1 KiB
XML
Raw Normal View History

<domain type='xen'>
<name>XenGuest1</name>
<uuid>c7a5fdb0-cdaf-9455-926a-d65c16db1809</uuid>
xml: output memory unit for clarity Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-02-23 00:48:38 +00:00
<memory unit='KiB'>592896</memory>
<currentMemory unit='KiB'>403456</currentMemory>
<vcpu placement='static'>1</vcpu>
<bootloader>/usr/bin/pygrub</bootloader>
<os>
<type arch='i686' machine='xenpv'>linux</type>
</os>
Xen: Fix <clock> handling XenD-3.1 introduced managed domains. HV-domains have rtc_timeoffset (hgd24f37b31030 from 2007-04-03), which tracks the offset between the hypervisors clock and the domains RTC, and is persisted by XenD. In combination with localtime=1 this had a bug until XenD-3.4 (hg5d701be7c37b from 2009-04-01) (I'm not 100% sure how that bug manifests, but at least for me in TZ=Europe/Berlin I see the previous offset relative to utc being applied to localtime again, which manifests in an extra hour being added) XenD implements the following variants for clock/@offset: - PV domains don't have a RTC → 'localtime' | 'utc' - <3.1: no managed domains → 'localtime' | 'utc' - ≥3.1: the offset is tracked for HV → 'variable' due to the localtime=1 bug → 'localtime' | 'utc' - ≥3.4: the offset is tracked for HV → 'variable' Current libvirtd still thinks XenD only implements <clock offset='utc'/> and <clock offset='localtime'/>, which is wrong, since the semantic of 'utc' and 'localtime' specifies, that the offset will be reset on domain-restart, while with 'variable' the offset is kept. (keeping the offset over "virsh edit" is important, since otherwise the clock might jump, which confuses certain guest OSs) xendConfigVersion was last incremented to 4 by the xen-folks for xen-3.1.0. I know of no way to reliably detect the version of XenD (user space tools), which may be different from the version of the hypervisor (kernel) version! Because of this only the change from 'utc'/'localtime' to 'variable' in XenD-3.1 is handled, not the buggy behaviour of XenD-3.1 until XenD-3.4. For backward compatibility with previous versions of libvirt Xen-HV still accepts 'utc' and 'localtime', but they are returned as 'variable' on the next read-back from Xend to libvirt, since this is what XenD implements: The RTC is NOT reset back to the specified time on next restart, but the previous offset is kept. This behaviour can be turned off by adding the additional attribute adjustment='reset', in which case libvirt will report an error instead of doing the conversion. The attribute can also be used as a shortcut to offset='variable' with basis='...'. With these changes, it is also necessary to adjust the xen tests: "localtime = 0" is always inserted, because otherwise on updates the value is not changed within XenD. adjustment='reset' is inserted for all cases, since they're all < XEND_CONFIG_VERSION_3_1_0, only 3.1 introduced persistent rtc_timeoffset. Some statements change their order because code was moved around. Signed-off-by: Philipp Hahn <hahn@univention.de>
2012-02-08 16:32:34 +00:00
<clock offset='utc' adjustment='reset'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<disk type='block' device='disk'>
<driver name='phy'/>
<source dev='/dev/HostVG/XenGuest1'/>
<target dev='xvda' bus='xen'/>
</disk>
<interface type='bridge'>
<mac address='00:16:3e:66:94:9c'/>
<source bridge='br0'/>
2009-04-24 12:17:50 +00:00
<script path='vif-bridge'/>
<target dev='net0'/>
<model type='e1000'/>
</interface>
<console type='pty'>
<target type='xen' port='0'/>
</console>
<input type='mouse' bus='xen'/>
conf: add <listen> subelement to domain <graphics> element Once it's plugged in, the <listen> element will be an optional replacement for the "listen" attribute that graphics elements already have. If the <listen> element is type='address', it will have an attribute called 'address' which will contain an IP address or dns name that the guest's display server should listen on. If, however, type='network', the <listen> element should have an attribute called 'network' that will be set to the name of a network configuration to get the IP address from. * docs/schemas/domain.rng: updated to allow the <listen> element * docs/formatdomain.html.in: document the <listen> element and its attributes. * src/conf/domain_conf.[hc]: 1) The domain parser, formatter, and data structure are modified to support 0 or more <listen> subelements to each <graphics> element. The old style "legacy" listen attribute is also still accepted, and will be stored internally just as if it were a separate <listen> element. On output (i.e. format), the address attribute of the first <listen> element of type 'address' will be duplicated in the legacy "listen" attribute of the <graphic> element. 2) The "listenAddr" attribute has been removed from the unions in virDomainGRaphicsDef for graphics types vnc, rdp, and spice. This attribute is now in the <listen> subelement (aka virDomainGraphicsListenDef) 3) Helper functions were written to provide simple access (both Get and Set) to the listen elements and their attributes. * src/libvirt_private.syms: export the listen helper functions * src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c, src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c, src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c Modify all these files to use the listen helper functions rather than directly referencing the (now missing) listenAddr attribute. There can be multiple <listen> elements to a single <graphics>, but the drivers all currently only support one, so all replacements of direct access with a helper function indicate index "0". * tests/* - only 3 of these are new files added explicitly to test the new <listen> element. All the others have been modified to reflect the fact that any legacy "listen" attributes passed in to the domain parse will be saved in a <listen> element (i.e. one of the virDomainGraphicsListenDefs), and during the domain format function, both the <listen> element as well as the legacy attributes will be output.
2011-07-07 04:20:28 +00:00
<graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1' passwd='123poi'>
<listen type='address' address='127.0.0.1'/>
</graphics>
</devices>
</domain>