libvirt/tests/qemuxml2xmloutdata/q35-pcie.xml

154 lines
6.6 KiB
XML
Raw Normal View History

qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
<domain type='qemu'>
<name>q35-test</name>
<uuid>11dbdcdd-4c3b-482b-8903-9bdb8c0a2774</uuid>
<memory unit='KiB'>2097152</memory>
<currentMemory unit='KiB'>2097152</currentMemory>
<vcpu placement='static' cpuset='0-1'>2</vcpu>
<os>
<type arch='x86_64' machine='q35'>hvm</type>
<boot dev='hd'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
<disk type='block' device='disk'>
<driver name='qemu' type='raw'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
<source dev='/dev/HostVG/QEMUGuest1'/>
<target dev='vdb' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x09' slot='0x00' function='0x0'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</disk>
<controller type='pci' index='0' model='pcie-root'/>
<controller type='pci' index='1' model='dmi-to-pci-bridge'>
<model name='i82801b11-bridge'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/>
</controller>
<controller type='pci' index='2' model='pci-bridge'>
<model name='pci-bridge'/>
<target chassisNr='2'/>
<address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
</controller>
<controller type='pci' index='3' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='3' port='0x10'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='pci' index='4' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='4' port='0x11'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='pci' index='5' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='5' port='0x12'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='pci' index='6' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='6' port='0x13'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='pci' index='7' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='7' port='0x14'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x4'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='pci' index='8' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='8' port='0x15'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x5'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='pci' index='9' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='9' port='0x16'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x6'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='pci' index='10' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='10' port='0x17'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x7'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='pci' index='11' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='11' port='0x18'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0' multifunction='on'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='pci' index='12' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='12' port='0x19'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x1'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='pci' index='13' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='13' port='0x1a'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x2'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='pci' index='14' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='14' port='0x1b'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x3'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='pci' index='15' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='15' port='0x1c'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x4'/>
</controller>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
<controller type='virtio-serial' index='0'>
<address type='pci' domain='0x0000' bus='0x06' slot='0x00' function='0x0'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='scsi' index='0' model='virtio-scsi'>
<address type='pci' domain='0x0000' bus='0x07' slot='0x00' function='0x0'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='usb' index='0' model='nec-xhci'>
<address type='pci' domain='0x0000' bus='0x08' slot='0x00' function='0x0'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</controller>
<controller type='sata' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
</controller>
<filesystem type='mount' accessmode='passthrough'>
<source dir='/export/to/guest'/>
<target dir='/import/from/host'/>
<address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
</filesystem>
<interface type='user'>
<mac address='00:11:22:33:44:55'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/>
</interface>
<interface type='user'>
<mac address='00:11:22:33:44:66'/>
<model type='e1000e'/>
<address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/>
</interface>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
<input type='passthrough' bus='virtio'>
<source evdev='/dev/input/event1234'/>
<address type='pci' domain='0x0000' bus='0x0c' slot='0x00' function='0x0'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</input>
<input type='mouse' bus='virtio'>
<address type='pci' domain='0x0000' bus='0x0d' slot='0x00' function='0x0'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</input>
<input type='keyboard' bus='virtio'>
<address type='pci' domain='0x0000' bus='0x0e' slot='0x00' function='0x0'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</input>
<input type='tablet' bus='virtio'>
<address type='pci' domain='0x0000' bus='0x0f' slot='0x00' function='0x0'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</input>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
<video>
<model type='virtio' heads='1' primary='yes'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/>
</video>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x0a' slot='0x00' function='0x0'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</memballoon>
<rng model='virtio'>
<rate bytes='123' period='1234'/>
<backend model='random'>/dev/urandom</backend>
<address type='pci' domain='0x0000' bus='0x0b' slot='0x00' function='0x0'/>
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
</rng>
</devices>
</domain>