External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-23 14:15:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
7f7bd6016e
libvirt/tests/qemuxml2argvdata/virtio-transitional.x86_64-latest.args

56 lines
2.3 KiB
Plaintext
Raw Normal View History

conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
LC_ALL=C \
PATH=/bin \
qemu: command: Override HOME variable for system QEMU By default, qemu user's home dir points to '/' which shouldn't be used at all. We therefore pass the HOME variable from the current variable iff not running as SUID, which means that for systemd we never set it. This patch makes sure, that for system QEMU this is always set to libDir/<driver>, session mode is left untouched. Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-06 12:29:01 +00:00
HOME=/tmp/lib/domain--1-QEMUGuest1 \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
USER=test \
LOGNAME=test \
qemu: command: Enforce setting XDG variables for system QEMU For session mode, only XDG_CACHE_HOME is set, because we want to remain integrating with services in user session, but for system mode, this would have become reading/writing to '/' which carries the obvious issue with permissions (also, '/' is the wrong location in 99.9% cases anyway). Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-08 11:15:07 +00:00
XDG_DATA_HOME=/tmp/lib/domain--1-QEMUGuest1/.local/share \
XDG_CACHE_HOME=/tmp/lib/domain--1-QEMUGuest1/.cache \
XDG_CONFIG_HOME=/tmp/lib/domain--1-QEMUGuest1/.config \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
QEMU_AUDIO_DRV=none \
/usr/bin/qemu-system-x86_64 \
-name guest=QEMUGuest1,debug-threads=on \
-S \
-object secret,id=masterKey0,format=raw,\
file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
-machine q35,accel=tcg,usb=off,dump-guest-core=off \
-m 214 \
qemu_command: Prefer '-overcommit mem-lock' over -realtime mlock' The latter is deprecated and will be removed soon. The advised replacement is '-overcommit mem-lock=on|off'. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-12 08:25:40 +00:00
-overcommit mem-lock=off \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
-smp 1,sockets=1,cores=1,threads=1 \
-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \
-display none \
-no-user-config \
-nodefaults \
-chardev socket,id=charmonitor,fd=1729,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
-no-shutdown \
-no-acpi \
-boot strict=on \
-device pcie-root-port,port=0x8,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,\
addr=0x1 \
qemu: Support filesystem model=virtio-{non-}transitional Add <filesystem> model handling for virtio transitional devices. Ex: <filesystem type='mount' model='virtio-transitional'> ... </filesystem * "virtio-transitional" maps to qemu "virtio-9p-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-9p-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:37 +00:00
-device pcie-pci-bridge,id=pci.2,bus=pci.1,addr=0x0 \
-device pcie-root-port,port=0x9,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x1 \
qemu: Support scsi controller model=virtio-{non-}transitional Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:43 +00:00
-device virtio-scsi-pci-transitional,id=scsi0,bus=pci.2,addr=0x4 \
qemu: Support virtio-serial controller model=virtio-{non-}transitional Add controller type='virtio-serial' model handling for virtio transitional devices. Ex: <controller type='virtio-serial' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-serial-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-serial-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:44 +00:00
-device virtio-serial-pci-transitional,id=virtio-serial0,bus=pci.2,addr=0x3 \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
qemu: Support scsi controller model=virtio-{non-}transitional Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:43 +00:00
-device virtio-blk-pci-transitional,scsi=off,bus=pci.2,addr=0x5,\
qemu: Support disk model=virtio-{non-}transitional Add new <disk> model values for virtio transitional devices. When combined with bus='virtio': * "virtio-transitional" maps to qemu "virtio-blk-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-blk-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 21:30:10 +00:00
drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
conf: Add <filesystem model='virtio-{non-}transitional'/> <filesystem> devices lack the model= attribute which is used by most other device types. To eventually support virtio-9p-pci-{non-}traditional in qemu, let's add a standard model= attribute. The accepted values are: - virtio - virtio-transitional - virtio-non-transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:36 +00:00
-fsdev local,security_model=passthrough,id=fsdev-fs0,path=/export/fs1 \
qemu: Support filesystem model=virtio-{non-}transitional Add <filesystem> model handling for virtio transitional devices. Ex: <filesystem type='mount' model='virtio-transitional'> ... </filesystem * "virtio-transitional" maps to qemu "virtio-9p-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-9p-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:37 +00:00
-device virtio-9p-pci-transitional,id=fs0,fsdev=fsdev-fs0,mount_tag=fs1,\
bus=pci.2,addr=0x1 \
qemu: Support interface model=virtio-{non-}transitional Add new <interface> model handling for virtio transitional devices. Ex: <interface> <model type='virtio-transitional'/> </interface> * "virtio-transitional" maps to qemu "virtio-net-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-net-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:32 +00:00
-netdev user,id=hostnet0 \
-device virtio-net-pci-transitional,netdev=hostnet0,id=net0,\
qemu: Support filesystem model=virtio-{non-}transitional Add <filesystem> model handling for virtio transitional devices. Ex: <filesystem type='mount' model='virtio-transitional'> ... </filesystem * "virtio-transitional" maps to qemu "virtio-9p-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-9p-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:37 +00:00
mac=00:11:22:33:44:55,bus=pci.2,addr=0x2 \
qemu: Support input model=virtio-{non-}transitional Add <input> model handling for virtio transitional devices. Ex: <input type='passthrough' bus='virtio' model='virtio-transitional'> ... </input> * "virtio-transitional" maps to qemu "virtio-input-host-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-input-host-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:42 +00:00
-device virtio-input-host-pci-transitional,id=input0,\
qemu: Support scsi controller model=virtio-{non-}transitional Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:43 +00:00
evdev=/dev/input/event1234,bus=pci.2,addr=0x9 \
qemu: Support hostdev model=virtio-{non-}transitional Add <hostdev> protocol=vhost model handling for virtio transitional devices. Ex: <hostdev mode='subsystem' type='scsi_host' model='virtio-transitional'> <source protocol='vhost' wwpn=X/> </hostdev> * "virtio-transitional" maps to qemu "vhost-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "vhost-scsi-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:34 +00:00
-device vhost-scsi-pci-transitional,wwpn=naa.5123456789abcde0,vhostfd=3,\
qemu: Support scsi controller model=virtio-{non-}transitional Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:43 +00:00
id=hostdev0,bus=pci.2,addr=0x6 \
-device virtio-balloon-pci-transitional,id=balloon0,bus=pci.2,addr=0x7 \
qemu: Support rng model=virtio-{non-}transitional Add new <rng> model values for virtio transitional devices. Ex: <rng model='virtio-transitional'> ... </rng> * "virtio-transitional" maps to qemu "virtio-rng-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-rng-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:35 +00:00
-object rng-random,id=objrng0,filename=/dev/urandom \
qemu: Support scsi controller model=virtio-{non-}transitional Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:43 +00:00
-device virtio-rng-pci-transitional,rng=objrng0,id=rng0,bus=pci.2,addr=0x8 \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
resourcecontrol=deny \
qemu: Support vsock model=virtio-{non-}transitional Add <vsock> model handling for virtio transitional devices. Ex: <vsock model='virtio-transitional'> ... </vsock> * "virtio-transitional" maps to qemu "vhost-vsock-pci-transitional" * "virtio-non-transitional" maps to qemu "vhost-vsock-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:40 +00:00
-device vhost-vsock-pci-transitional,id=vsock0,guest-cid=4,vhostfd=6789,\
qemu: Support scsi controller model=virtio-{non-}transitional Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:43 +00:00
bus=pci.2,addr=0xa \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
-msg timestamp=on
Reference in New Issue Copy Permalink