External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-24 06:35:24 +00:00
Code Issues Packages Projects Releases Wiki Activity
82576d8f35
libvirt/tests/qemuxml2argvdata/graphics-spice.args

36 lines
1.2 KiB
Plaintext
Raw Normal View History

tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
LC_ALL=C \
PATH=/bin \
HOME=/home/test \
USER=test \
LOGNAME=test \
QEMU_AUDIO_DRV=spice \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
/usr/bin/qemu-system-i686 \
qemu: assume -name is always available The -name arg was added in QEMU 0.9.1, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:41 +00:00
-name QEMUGuest1 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-S \
qemu: deprecate QEMU_CAPS_MACHINE_USB_OPT Implied by QEMU >= 1.3.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-machine pc,accel=tcg,usb=off,dump-guest-core=off \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-m 214 \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 11:29:16 +00:00
-smp 1,sockets=1,cores=1,threads=1 \
qemu: assume -uuid is always available The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:52 +00:00
-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-user-config \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-nodefaults \
qemu: command: always use -chardev for monitor config AFAIK there aren't any cases where we will/should hit the old code path for our supported qemu versions, so drop the old code. Massive test suite churn follows Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2017-06-26 14:40:39 +00:00
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-QEMUGuest1/monitor.sock,\
server,nowait \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-28 22:04:58 +00:00
-mon chardev=charmonitor,id=monitor,mode=control \
qemu: deprecate QEMU_CAPS_RTC Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-rtc base=utc \
qemu: deprecate QEMU_CAPS_NO_SHUTDOWN Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-shutdown \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-no-acpi \
-usb \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 14:13:52 +00:00
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
qemu: capabilities: Always assume QEMU_CAPS_BOOTINDEX The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported qemu versions now use it. There's a LOT of test fallout as we did not use capabilities close enough to upstream for many of our tests. Several tests had a 'bootindex' variant. Since they'd become redundant they are also removed here. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-08-09 11:26:17 +00:00
-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,\
bootindex=1 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-spice port=5903,tls-port=5904,addr=127.0.0.1,x509-dir=/etc/pki/libvirt-spice,\
tls-channel=default,tls-channel=main,plaintext-channel=inputs,\
tests: split long lines Long lines are harder to read and harder to diff; in fact, if lines get too long (> 1000 bytes), it starts causing issues where git send-email refuses to send patches for the file. I've cleaned up the tests directory in the past (see commits bd6c46f, 3b750d1), but new long lines have been introduced in the meantime. Why 90 instead of 80? Because there were too many tests on the fringe edge, and I didn't want to edit that many files. Add a syntax check to prevent future long lines. * cfg.mk (sc_prohibit_long_lines): New rule. * tests/qemuxml2argvdata/qemuxml2argv-*.args: Split lines of any file with content longer than 90 columns. * tests/storagevolxml2argvdata/*.argv: Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-07-17 17:47:01 +00:00
image-compression=auto_glz,jpeg-wan-compression=auto,\
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
zlib-glz-wan-compression=auto,playback-compression=on,streaming-video=filter,\
disable-copy-paste,disable-agent-file-xfer \
-vga qxl \
-global qxl-vga.ram_size=67108864 \
QXL: fix setting ram and vram values for QEMU QXL device QEMU has two different type of QXL display device. The first "qxl-vga" is for primary video device and second "qxl" is for secondary video device. There are also two different ways how to specify those devices on qemu command line, the first one and obsolete is using "-vga" option and the current new one is using "-device" option. The "-vga" could be used only to setup primary video device, so the "-vga qxl" equal to "-device qxl-vga". Unfortunately the "-vga qxl" doesn't support setting additional parameters for the device and "-global" option must be used for this purpose. It's mandatory to use "-global qxl-vga...." to set the parameters of primary video device previously defined with "-vga qxl". Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098 Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2014-11-18 16:21:48 +00:00
-global qxl-vga.vram_size=33554432 \
qemu: Support ram bar size for qxl devices Adds a "ram" attribute globally to the video.model element, that changes the resulting qemu command line only if video.type == "qxl". <video> <model type='qxl' ram='65536' vram='65536' heads='1'/> </video> That attribute gets a default value of 64*1024. The schema is unchanged for other video element types. The resulting qemu command line change is the addition of -global qxl-vga.ram_size=<ram>*1024 or -global qxl.ram_size=<ram>*1024 For the main and secondary qxl devices respectively. The default for the qxl ram bar is 64*1024 kilobytes (the same as the default qxl vram bar size).
2013-01-18 18:36:36 +00:00
-device qxl,id=video1,ram_size=67108864,vram_size=33554432,bus=pci.0,addr=0x4 \
qemu: Support vram for video of qxl type For qemu names the primary vga as "qxl-vga": 1) if vram is specified for 2nd qxl device: -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,vram_size=$SIZE,... 2) if vram is not specified for 2nd qxl device, (use the default set by global): -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,... For qemu names all qxl devices as "qxl": 1) if vram is specified for 2nd qxl device: -vga qxl -global qxl.vram_size=$SIZE \ -device qxl,id=video1,vram_size=$SIZE ... 2) if vram is not specified for 2nd qxl device: -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,... "-global" is the only way to define vram_size for the primary qxl device, regardless of how qemu names it, (It's not good a good way, as original idea of "-global" is to set a global default for a driver property, but to specify vram for first qxl device, we have to use it). For other qxl devices, as they are represented by "-device", could specify it directly and seperately for each, and it overrides the default set by "-global" if specified. v1 - v2: * modify "virDomainVideoDefaultRAM" so that it returns 16M as the default vram_size for qxl device. * vram_size * 1024 (qemu accepts bytes for vram_size). * apply default vram_size for qxl device for which vram_size is not specified. * modify "graphics-spice" tests (more sensiable vram_size) * Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr, to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr). v2 - v3: * Modify default video memory size for qxl device from 16M to 24M * Update codes to be consistent with changes on qemu_capabilities.*
2011-03-06 14:00:27 +00:00
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
Reference in New Issue Copy Permalink