libvirt/tests/qemuxml2argvdata/net-hostdev.xml

43 lines
1.4 KiB
XML
Raw Normal View History

conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<domain type='qemu'>
<name>QEMUGuest1</name>
<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
xml: output memory unit for clarity Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-02-23 00:48:38 +00:00
<memory unit='KiB'>219136</memory>
<currentMemory unit='KiB'>219136</currentMemory>
<vcpu placement='static'>1</vcpu>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<os>
<type arch='i686' machine='pc'>hvm</type>
<boot dev='hd'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>/usr/bin/qemu-system-i686</emulator>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<disk type='block' device='disk'>
<source dev='/dev/HostVG/QEMUGuest1'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<controller type='usb' index='0'/>
<controller type='ide' index='0'/>
<controller type='pci' index='0' model='pci-root'/>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<interface type='hostdev' managed='yes'>
<mac address='00:11:22:33:44:55'/>
<source>
<address type='pci' domain='0x0000' bus='0x03' slot='0x07' function='0x1'/>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
</source>
conf: add <vlan> element to network and domain interface elements The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
2012-08-12 07:51:30 +00:00
<vlan>
<tag id='42'/>
</vlan>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<virtualport type='802.1Qbg'>
<parameters managerid='11' typeid='1193047' typeidversion='2' instanceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/>
</virtualport>
<model type='rtl8139'/>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
</interface>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<memballoon model='virtio'/>
</devices>
</domain>