External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-24 22:55:23 +00:00
Code Issues Packages Projects Releases Wiki Activity
8f5e50e003
libvirt/tests/qemuxml2argvdata/memory-hotplug-dimm-addr.args

35 lines
1.1 KiB
Plaintext
Raw Normal View History

tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
LC_ALL=C \
PATH=/bin \
HOME=/home/test \
USER=test \
LOGNAME=test \
QEMU_AUDIO_DRV=none \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
/usr/bin/qemu-system-i686 \
qemu: assume -name is always available The -name arg was added in QEMU 0.9.1, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:41 +00:00
-name QEMUGuest1 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-S \
qemu: deprecate QEMU_CAPS_MACHINE_USB_OPT Implied by QEMU >= 1.3.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-machine pc,accel=tcg,usb=off,dump-guest-core=off \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-m size=219136k,slots=16,maxmem=1099511627776k \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 11:29:16 +00:00
-smp 2,sockets=2,cores=1,threads=1 \
qemu: command: Fix property name for start address of a pc-dimm module Starting a qemu VM with a memory module that has the base address specified results in the following error: error: internal error: early end of file from monitor: possible problem: 2015-03-26T03:45:52.338891Z qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0, id=dimm0,slot=0,base=4294967296: Property '.base' not found The correct property name for the base address is 'addr'. Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-03-26 06:30:56 +00:00
-numa node,nodeid=0,cpus=0-1,mem=214 \
qemuBuildMemoryBackendStr: Honour passed @pagesize So far the argument has not much meaning and was practically ignored. This is not good since when doing memory hotplug, the size of desired hugepage backing is passed in that argument. Taking closer look at the tests I'm fixing reveals the bug. For instance, while the following is in the test: <memory model='dimm'> <source> <nodemask>1-3</nodemask> <pagesize unit='KiB'>4096</pagesize> </source> <target> <size unit='KiB'>524287</size> <node>0</node> </target> <address type='dimm' slot='0' base='0x100000000'/> </memory> the generated commandline corresponding to this XML was: -object memory-backend-ram,id=memdimm0,size=536870912,\ host-nodes=1-3,policy=bind Have you noticed? Yes, memory-backend-ram! Nothing can be further away from the right answer. The hugepage backing is requested in the XML and we happily ignore it. This is just not right. It's memory-backend-file which should have been used: -object memory-backend-file,id=memdimm0,prealloc=yes,\ mem-path=/dev/hugepages4M/libvirt/qemu,size=536870912,\ host-nodes=1-3,policy=bind The problem is, that @pagesize passed to qemuBuildMemoryBackendStr (where this part of commandline is built) was ignored. The hugepage to back memory was searched only and only by NUMA nodes pinning. This works only for regular guest NUMA nodes. Then, I'm changing the hugepages size in the test XMLs too. This is simply because in the test suite we create dummy mount points just for 2M and 1G hugepages. And in the test 4M was requested. I'm sticking to 2M, but 1G should just work too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-25 15:27:29 +00:00
-object memory-backend-file,id=memdimm0,prealloc=yes,\
qemu: Create hugepage path on per domain basis If you've ever tried running a huge page backed guest under different user than in qemu.conf, you probably failed. Problem is even though we have corresponding APIs in the security drivers, there's no implementation and thus we don't relabel the huge page path. But even if we did, so far all of the domains share the same path: /hugepageMount/libvirt/qemu Our only option there would be to set 0777 mode on the qemu dir which is totally unsafe. Therefore, we can create dir on per-domain basis, i.e.: /hugepageMount/libvirt/qemu/domainName and chown domainName dir to the user that domain is configured to run under. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-11-22 12:21:51 +00:00
mem-path=/dev/hugepages2M/libvirt/qemu/-1-QEMUGuest1,size=536870912,\
host-nodes=1-3,policy=bind \
qemu: command: Fix property name for start address of a pc-dimm module Starting a qemu VM with a memory module that has the base address specified results in the following error: error: internal error: early end of file from monitor: possible problem: 2015-03-26T03:45:52.338891Z qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0, id=dimm0,slot=0,base=4294967296: Property '.base' not found The correct property name for the base address is 'addr'. Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-03-26 06:30:56 +00:00
-device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0,addr=4294967296 \
qemu: Generate memory device aliases according to slot number The memory device alias needs to be treated as machine ABI as qemu is using it in the migration stream for section labels. To simplify this generate the alias from the slot number unless an existing broken configuration is detected. With this patch the aliases are predictable and even certain configurations which would not be migratable previously are fixed. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1359135
2016-11-01 05:21:36 +00:00
-object memory-backend-ram,id=memdimm2,size=536870912 \
-device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \
qemu: assume -uuid is always available The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:52 +00:00
-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \
qemu: deprecate QEMU_CAPS_DISPLAY Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-display none \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-user-config \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-nodefaults \
qemu: command: always use -chardev for monitor config AFAIK there aren't any cases where we will/should hit the old code path for our supported qemu versions, so drop the old code. Massive test suite churn follows Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2017-06-26 14:40:39 +00:00
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-QEMUGuest1/monitor.sock,\
server,nowait \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-28 22:04:58 +00:00
-mon chardev=charmonitor,id=monitor,mode=control \
qemu: deprecate QEMU_CAPS_RTC Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-rtc base=utc \
qemu: deprecate QEMU_CAPS_NO_SHUTDOWN Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-shutdown \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-no-acpi \
-usb \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 14:13:52 +00:00
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
qemu: capabilities: Always assume QEMU_CAPS_BOOTINDEX The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported qemu versions now use it. There's a LOT of test fallout as we did not use capabilities close enough to upstream for many of our tests. Several tests had a 'bootindex' variant. Since they'd become redundant they are also removed here. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-08-09 11:26:17 +00:00
-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,\
bootindex=1 \
qemu: command: Fix property name for start address of a pc-dimm module Starting a qemu VM with a memory module that has the base address specified results in the following error: error: internal error: early end of file from monitor: possible problem: 2015-03-26T03:45:52.338891Z qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0, id=dimm0,slot=0,base=4294967296: Property '.base' not found The correct property name for the base address is 'addr'. Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-03-26 06:30:56 +00:00
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
Reference in New Issue Copy Permalink