External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-10-31 10:23:09 +00:00
Code Issues Packages Projects Releases Wiki Activity
9013204afe
libvirt/src/conf/netdev_vlan_conf.h

28 lines
984 B
C
Raw Normal View History

conf: add <vlan> element to network and domain interface elements The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
2012-08-12 07:51:30 +00:00
/*
maint: avoid 'const fooPtr' in conf 'const fooPtr' is the same as 'foo * const' (the pointer won't change, but it's contents can). But in general, if an interface is trying to be const-correct, it should be using 'const foo *' (the pointer is to data that can't be changed). Fix up remaining offenders in src/conf, and their fallout. * src/conf/snapshot_conf.h (virDomainSnapshotAssignDef) (virDomainSnapshotFindByName): Drop attempt at const. * src/conf/interface_conf.h (virInterfaceObjIsActive) (virInterfaceDefFormat): Use intended type. (virInterfaceFindByMACString, virInterfaceFindByName) (virInterfaceAssignDef, virInterfaceRemove): Drop attempt at const. * src/conf/network_conf.h (virNetworkObjIsActive) (virNetworkDefFormat, virNetworkDefForwardIf) (virNetworkDefGetIpByIndex, virNetworkIpDefPrefix) (virNetworkIpDefNetmask): Use intended type. (virNetworkFindByUUID, virNetworkFindByName, virNetworkAssignDef) (virNetworkObjAssignDef, virNetworkRemoveInactive) (virNetworkBridgeInUse, virNetworkSetBridgeName) (virNetworkAllocateBridge): Drop attempt at const. * src/conf/netdev_vlan_conf.h (virNetDevVlanFormat): Make const-correct. * src/conf/node_device_conf.h (virNodeDeviceHasCap) (virNodeDeviceDefFormat): Use intended type. (virNodeDeviceFindByName, virNodeDeviceFindBySysfsPath) (virNodeDeviceAssignDef, virNodeDeviceObjRemove) (virNodeDeviceGetParentHost): Drop attempt at const. * src/conf/secret_conf.h (virSecretDefFormat): Use intended type. * src/conf/snapshot_conf.c (virDomainSnapshotAssignDef) (virDomainSnapshotFindByName): Fix fallout. * src/conf/interface_conf.c (virInterfaceBridgeDefFormat) (virInterfaceBondDefFormat, virInterfaceVlanDefFormat) (virInterfaceProtocolDefFormat, virInterfaceDefDevFormat) (virInterfaceDefFormat, virInterfaceFindByMACString) (virInterfaceFindByName, virInterfaceAssignDef) (virInterfaceRemove): Likewise. * src/conf/network_conf.c (VIR_ENUM_IMPL, virNetworkFindByName, virNetworkObjAssignDef) (virNetworkAssignDef, virNetworkRemoveInactive) (virNetworkDefGetIpByIndex, virNetworkIpDefPrefix) (virNetworkIpDefNetmask, virNetworkDHCPHostDefParseXML) (virNetworkIpDefFormat, virNetworkRouteDefFormat) (virPortGroupDefFormat, virNetworkForwardNatDefFormat) (virNetworkDefFormatInternal, virNetworkBridgeInUse) (virNetworkAllocateBridge, virNetworkSetBridgeName) (virNetworkDNSDefFormat, virNetworkDefFormat): Likewise. * src/conf/netdev_vlan_conf.c (virNetDevVlanFormat): Likewise. * src/conf/node_device_conf.c (virNodeDeviceHasCap) (virNodeDeviceFindBySysfsPath, virNodeDeviceFindByName) (virNodeDeviceAssignDef, virNodeDeviceObjRemove) (virNodeDeviceDefFormat, virNodeDeviceGetParentHost): Likewise. * src/conf/secret_conf.c (virSecretDefFormatUsage) (virSecretDefFormat): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-10-08 16:36:37 +00:00
* Copyright (C) 2009-2013 Red Hat, Inc.
conf: add <vlan> element to network and domain interface elements The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
2012-08-12 07:51:30 +00:00
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
maint: fix up copyright notice inconsistencies https://www.gnu.org/licenses/gpl-howto.html recommends that the 'If not, see <url>.' phrase be a separate sentence. * tests/securityselinuxhelper.c: Remove doubled line. * tests/securityselinuxtest.c: Likewise. * globally: s/; If/. If/
2012-09-20 22:30:55 +00:00
* License along with this library. If not, see
conf: add <vlan> element to network and domain interface elements The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
2012-08-12 07:51:30 +00:00
* <http://www.gnu.org/licenses/>.
*/
conf: network: use #pragma once in headers Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-06-07 20:20:17 +00:00
#pragma once
conf: add <vlan> element to network and domain interface elements The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
2012-08-12 07:51:30 +00:00
conf: network: use #pragma once in headers Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-06-07 20:20:17 +00:00
#include "internal.h"
#include "virnetdevvlan.h"
#include "virbuffer.h"
#include "virxml.h"
conf: add <vlan> element to network and domain interface elements The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
2012-08-12 07:51:30 +00:00
lib: Drop internal virXXXPtr typedefs Historically, we declared pointer type to our types: typedef struct _virXXX virXXX; typedef virXXX *virXXXPtr; But usefulness of such declaration is questionable, at best. Unfortunately, we can't drop every such declaration - we have to carry some over, because they are part of public API (e.g. virDomainPtr). But for internal types - we can do drop them and use what every other C project uses 'virXXX *'. This change was generated by a very ugly shell script that generated sed script which was then called over each file in the repository. For the shell script refer to the cover letter: https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-03-11 07:16:13 +00:00
int virNetDevVlanParse(xmlNodePtr node, xmlXPathContextPtr ctxt, virNetDevVlan *def);
int virNetDevVlanFormat(const virNetDevVlan *def, virBuffer *buf);
Reference in New Issue Copy Permalink