libvirt/src/qemu/qemu_hostdev.c

1470 lines
47 KiB
C
Raw Normal View History

/*
* qemu_hostdev.c: QEMU hostdev management
*
* Copyright (C) 2006-2007, 2009-2013 Red Hat, Inc.
* Copyright (C) 2006 Daniel P. Berrange
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see
* <http://www.gnu.org/licenses/>.
*
* Author: Daniel P. Berrange <berrange@redhat.com>
*/
#include <config.h>
#include <dirent.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <errno.h>
#include "qemu_hostdev.h"
2012-12-12 17:59:27 +00:00
#include "virlog.h"
#include "virerror.h"
2012-12-12 18:06:53 +00:00
#include "viralloc.h"
2012-12-13 14:52:25 +00:00
#include "virpci.h"
2012-12-12 17:04:51 +00:00
#include "virusb.h"
#include "virscsi.h"
#include "virnetdev.h"
#include "virfile.h"
#define VIR_FROM_THIS VIR_FROM_QEMU
static virPCIDeviceListPtr
qemuGetPciHostDeviceList(virDomainHostdevDefPtr *hostdevs, int nhostdevs)
{
virPCIDeviceListPtr list;
size_t i;
if (!(list = virPCIDeviceListNew()))
return NULL;
for (i = 0; i < nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
virPCIDevicePtr dev;
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain,
hostdev->source.subsys.u.pci.addr.bus,
hostdev->source.subsys.u.pci.addr.slot,
hostdev->source.subsys.u.pci.addr.function);
if (!dev) {
virObjectUnref(list);
return NULL;
}
if (virPCIDeviceListAdd(list, dev) < 0) {
virPCIDeviceFree(dev);
virObjectUnref(list);
return NULL;
}
virPCIDeviceSetManaged(dev, hostdev->managed);
if (hostdev->source.subsys.u.pci.backend
== VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO) {
if (virPCIDeviceSetStubDriver(dev, "vfio-pci") < 0) {
virObjectUnref(list);
return NULL;
}
} else {
if (virPCIDeviceSetStubDriver(dev, "pci-stub") < 0) {
virObjectUnref(list);
return NULL;
}
}
}
return list;
}
/*
* qemuGetActivePciHostDeviceList - make a new list with a *copy* of
* every virPCIDevice object that is found on the activePciHostdevs
* list *and* is in the hostdev list for this domain.
*
* Return the new list, or NULL if there was a failure.
*
* Pre-condition: driver->activePciHostdevs is locked
*/
static virPCIDeviceListPtr
qemuGetActivePciHostDeviceList(virQEMUDriverPtr driver,
virDomainHostdevDefPtr *hostdevs,
int nhostdevs)
{
virPCIDeviceListPtr list;
size_t i;
if (!(list = virPCIDeviceListNew()))
return NULL;
for (i = 0; i < nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
virDevicePCIAddressPtr addr;
virPCIDevicePtr activeDev;
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
addr = &hostdev->source.subsys.u.pci.addr;
activeDev = virPCIDeviceListFindByIDs(driver->activePciHostdevs,
addr->domain, addr->bus,
addr->slot, addr->function);
if (activeDev && virPCIDeviceListAddCopy(list, activeDev) < 0) {
virObjectUnref(list);
return NULL;
}
}
return list;
}
int
qemuUpdateActivePciHostdevs(virQEMUDriverPtr driver,
virDomainDefPtr def)
{
virDomainHostdevDefPtr hostdev = NULL;
virPCIDevicePtr dev = NULL;
size_t i;
int ret = -1;
if (!def->nhostdevs)
return 0;
virObjectLock(driver->activePciHostdevs);
virObjectLock(driver->inactivePciHostdevs);
for (i = 0; i < def->nhostdevs; i++) {
hostdev = def->hostdevs[i];
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain,
hostdev->source.subsys.u.pci.addr.bus,
hostdev->source.subsys.u.pci.addr.slot,
hostdev->source.subsys.u.pci.addr.function);
if (!dev)
goto cleanup;
virPCIDeviceSetManaged(dev, hostdev->managed);
if (hostdev->source.subsys.u.pci.backend
== VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO) {
if (virPCIDeviceSetStubDriver(dev, "vfio-pci") < 0)
goto cleanup;
} else {
if (virPCIDeviceSetStubDriver(dev, "pci-stub") < 0)
goto cleanup;
}
virPCIDeviceSetUsedBy(dev, def->name);
/* Setup the original states for the PCI device */
virPCIDeviceSetUnbindFromStub(dev, hostdev->origstates.states.pci.unbind_from_stub);
virPCIDeviceSetRemoveSlot(dev, hostdev->origstates.states.pci.remove_slot);
virPCIDeviceSetReprobe(dev, hostdev->origstates.states.pci.reprobe);
if (virPCIDeviceListAdd(driver->activePciHostdevs, dev) < 0)
goto cleanup;
dev = NULL;
}
ret = 0;
cleanup:
virPCIDeviceFree(dev);
virObjectUnlock(driver->activePciHostdevs);
virObjectUnlock(driver->inactivePciHostdevs);
return ret;
}
int
qemuUpdateActiveUsbHostdevs(virQEMUDriverPtr driver,
virDomainDefPtr def)
{
virDomainHostdevDefPtr hostdev = NULL;
size_t i;
int ret = -1;
if (!def->nhostdevs)
return 0;
virObjectLock(driver->activeUsbHostdevs);
for (i = 0; i < def->nhostdevs; i++) {
virUSBDevicePtr usb = NULL;
hostdev = def->hostdevs[i];
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB)
continue;
usb = virUSBDeviceNew(hostdev->source.subsys.u.usb.bus,
hostdev->source.subsys.u.usb.device,
NULL);
if (!usb) {
VIR_WARN("Unable to reattach USB device %03d.%03d on domain %s",
hostdev->source.subsys.u.usb.bus,
hostdev->source.subsys.u.usb.device,
def->name);
continue;
}
virUSBDeviceSetUsedBy(usb, def->name);
if (virUSBDeviceListAdd(driver->activeUsbHostdevs, usb) < 0) {
virUSBDeviceFree(usb);
goto cleanup;
}
}
ret = 0;
cleanup:
virObjectUnlock(driver->activeUsbHostdevs);
return ret;
}
int
qemuUpdateActiveScsiHostdevs(virQEMUDriverPtr driver,
virDomainDefPtr def)
{
virDomainHostdevDefPtr hostdev = NULL;
size_t i;
int ret = -1;
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
virSCSIDevicePtr scsi = NULL;
virSCSIDevicePtr tmp = NULL;
if (!def->nhostdevs)
return 0;
virObjectLock(driver->activeScsiHostdevs);
for (i = 0; i < def->nhostdevs; i++) {
hostdev = def->hostdevs[i];
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS ||
hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI)
continue;
if (!(scsi = virSCSIDeviceNew(NULL,
hostdev->source.subsys.u.scsi.adapter,
hostdev->source.subsys.u.scsi.bus,
hostdev->source.subsys.u.scsi.target,
hostdev->source.subsys.u.scsi.unit,
hostdev->readonly,
hostdev->shareable)))
goto cleanup;
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
if ((tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi))) {
if (virSCSIDeviceSetUsedBy(tmp, def->name) < 0) {
virSCSIDeviceFree(scsi);
goto cleanup;
}
virSCSIDeviceFree(scsi);
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
} else {
if (virSCSIDeviceSetUsedBy(scsi, def->name) < 0 ||
virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0) {
virSCSIDeviceFree(scsi);
goto cleanup;
}
}
}
ret = 0;
cleanup:
virObjectUnlock(driver->activeScsiHostdevs);
return ret;
}
static int
qemuDomainHostdevPciSysfsPath(virDomainHostdevDefPtr hostdev,
char **sysfs_path)
{
virPCIDeviceAddress config_address;
config_address.domain = hostdev->source.subsys.u.pci.addr.domain;
config_address.bus = hostdev->source.subsys.u.pci.addr.bus;
config_address.slot = hostdev->source.subsys.u.pci.addr.slot;
config_address.function = hostdev->source.subsys.u.pci.addr.function;
return virPCIDeviceAddressGetSysfsFile(&config_address, sysfs_path);
}
int
qemuDomainHostdevIsVirtualFunction(virDomainHostdevDefPtr hostdev)
{
char *sysfs_path = NULL;
int ret = -1;
if (qemuDomainHostdevPciSysfsPath(hostdev, &sysfs_path) < 0)
return ret;
ret = virPCIIsVirtualFunction(sysfs_path);
VIR_FREE(sysfs_path);
return ret;
}
static int
qemuDomainHostdevNetDevice(virDomainHostdevDefPtr hostdev, char **linkdev,
int *vf)
{
int ret = -1;
char *sysfs_path = NULL;
if (qemuDomainHostdevPciSysfsPath(hostdev, &sysfs_path) < 0)
return ret;
if (virPCIIsVirtualFunction(sysfs_path) == 1) {
if (virPCIGetVirtualFunctionInfo(sysfs_path, linkdev,
vf) < 0)
goto cleanup;
} else {
if (virPCIGetNetName(sysfs_path, linkdev) < 0)
goto cleanup;
*vf = -1;
}
ret = 0;
cleanup:
VIR_FREE(sysfs_path);
return ret;
}
static int
qemuDomainHostdevNetConfigVirtPortProfile(const char *linkdev, int vf,
virNetDevVPortProfilePtr virtPort,
const virMacAddr *macaddr,
const unsigned char *uuid,
bool associate)
{
int ret = -1;
if (!virtPort)
return ret;
switch (virtPort->virtPortType) {
case VIR_NETDEV_VPORT_PROFILE_NONE:
case VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH:
case VIR_NETDEV_VPORT_PROFILE_8021QBG:
case VIR_NETDEV_VPORT_PROFILE_LAST:
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("virtualport type %s is "
"currently not supported on interfaces of type "
"hostdev"),
virNetDevVPortTypeToString(virtPort->virtPortType));
break;
case VIR_NETDEV_VPORT_PROFILE_8021QBH:
if (associate)
ret = virNetDevVPortProfileAssociate(NULL, virtPort, macaddr,
linkdev, vf, uuid,
VIR_NETDEV_VPORT_PROFILE_OP_CREATE, false);
else
ret = virNetDevVPortProfileDisassociate(NULL, virtPort,
macaddr, linkdev, vf,
VIR_NETDEV_VPORT_PROFILE_OP_DESTROY);
break;
}
return ret;
}
int
qemuDomainHostdevNetConfigReplace(virDomainHostdevDefPtr hostdev,
const unsigned char *uuid,
char *stateDir)
{
char *linkdev = NULL;
virNetDevVlanPtr vlan;
virNetDevVPortProfilePtr virtPort;
int ret = -1;
int vf = -1;
int vlanid = -1;
bool port_profile_associate = true;
int isvf;
isvf = qemuDomainHostdevIsVirtualFunction(hostdev);
if (isvf <= 0) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("Interface type hostdev is currently supported on"
" SR-IOV Virtual Functions only"));
return ret;
}
if (qemuDomainHostdevNetDevice(hostdev, &linkdev, &vf) < 0)
return ret;
vlan = virDomainNetGetActualVlan(hostdev->parent.data.net);
virtPort = virDomainNetGetActualVirtPortProfile(
hostdev->parent.data.net);
if (virtPort) {
if (vlan) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("direct setting of the vlan tag is not allowed "
"for hostdev devices using %s mode"),
virNetDevVPortTypeToString(virtPort->virtPortType));
goto cleanup;
}
ret = qemuDomainHostdevNetConfigVirtPortProfile(linkdev, vf,
virtPort, &hostdev->parent.data.net->mac, uuid,
port_profile_associate);
} else {
/* Set only mac and vlan */
if (vlan) {
if (vlan->nTags != 1 || vlan->trunk) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("vlan trunking is not supported "
"by SR-IOV network devices"));
goto cleanup;
}
if (vf == -1) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("vlan can only be set for SR-IOV VFs, but "
"%s is not a VF"), linkdev);
goto cleanup;
}
vlanid = vlan->tag[0];
} else if (vf >= 0) {
vlanid = 0; /* assure any current vlan tag is reset */
}
ret = virNetDevReplaceNetConfig(linkdev, vf,
&hostdev->parent.data.net->mac,
vlanid, stateDir);
}
cleanup:
VIR_FREE(linkdev);
return ret;
}
int
qemuDomainHostdevNetConfigRestore(virDomainHostdevDefPtr hostdev,
char *stateDir)
{
char *linkdev = NULL;
virNetDevVPortProfilePtr virtPort;
int ret = -1;
int vf = -1;
bool port_profile_associate = false;
int isvf;
/* This is only needed for PCI devices that have been defined
* using <interface type='hostdev'>. For all others, it is a NOP.
*/
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS ||
hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI ||
hostdev->parent.type != VIR_DOMAIN_DEVICE_NET ||
!hostdev->parent.data.net)
return 0;
isvf = qemuDomainHostdevIsVirtualFunction(hostdev);
if (isvf <= 0) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("Interface type hostdev is currently supported on"
" SR-IOV Virtual Functions only"));
return ret;
}
if (qemuDomainHostdevNetDevice(hostdev, &linkdev, &vf) < 0)
return ret;
virtPort = virDomainNetGetActualVirtPortProfile(
hostdev->parent.data.net);
if (virtPort)
ret = qemuDomainHostdevNetConfigVirtPortProfile(linkdev, vf, virtPort,
&hostdev->parent.data.net->mac, NULL,
port_profile_associate);
else
ret = virNetDevRestoreNetConfig(linkdev, vf, stateDir);
VIR_FREE(linkdev);
return ret;
}
bool
qemuHostdevHostSupportsPassthroughVFIO(void)
{
DIR *iommuDir = NULL;
struct dirent *iommuGroup = NULL;
bool ret = false;
/* condition 1 - /sys/kernel/iommu_groups/ contains entries */
if (!(iommuDir = opendir("/sys/kernel/iommu_groups/")))
goto cleanup;
while ((iommuGroup = readdir(iommuDir))) {
/* skip ./ ../ */
if (STRPREFIX(iommuGroup->d_name, "."))
continue;
/* assume we found a group */
break;
}
if (!iommuGroup)
goto cleanup;
/* okay, iommu is on and recognizes groups */
/* condition 2 - /dev/vfio/vfio exists */
if (!virFileExists("/dev/vfio/vfio"))
goto cleanup;
ret = true;
cleanup:
if (iommuDir)
closedir(iommuDir);
return ret;
}
#if HAVE_LINUX_KVM_H
# include <linux/kvm.h>
bool
qemuHostdevHostSupportsPassthroughLegacy(void)
{
int kvmfd = -1;
bool ret = false;
if ((kvmfd = open("/dev/kvm", O_RDONLY)) < 0)
goto cleanup;
# ifdef KVM_CAP_IOMMU
if ((ioctl(kvmfd, KVM_CHECK_EXTENSION, KVM_CAP_IOMMU)) <= 0)
goto cleanup;
ret = true;
# endif
cleanup:
VIR_FORCE_CLOSE(kvmfd);
return ret;
}
#else
bool
qemuHostdevHostSupportsPassthroughLegacy(void)
{
return false;
}
#endif
static bool
qemuPrepareHostdevPCICheckSupport(virDomainHostdevDefPtr *hostdevs,
size_t nhostdevs,
virQEMUCapsPtr qemuCaps)
{
bool supportsPassthroughKVM = qemuHostdevHostSupportsPassthroughLegacy();
bool supportsPassthroughVFIO = qemuHostdevHostSupportsPassthroughVFIO();
size_t i;
/* assign defaults for hostdev passthrough */
for (i = 0; i < nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
int *backend = &hostdev->source.subsys.u.pci.backend;
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
switch ((virDomainHostdevSubsysPciBackendType) *backend) {
case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT:
if (supportsPassthroughVFIO &&
virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VFIO_PCI)) {
*backend = VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO;
} else if (supportsPassthroughKVM &&
(virQEMUCapsGet(qemuCaps, QEMU_CAPS_PCIDEVICE) ||
virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE))) {
*backend = VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM;
} else {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("host doesn't support passthrough of "
"host PCI devices"));
return false;
}
break;
case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO:
if (!supportsPassthroughVFIO) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("host doesn't support VFIO PCI passthrough"));
return false;
}
break;
case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM:
if (!supportsPassthroughKVM) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
_("host doesn't support legacy PCI passthrough"));
return false;
}
break;
case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_LAST:
break;
}
}
return true;
}
int
qemuPrepareHostdevPCIDevices(virQEMUDriverPtr driver,
const char *name,
const unsigned char *uuid,
virDomainHostdevDefPtr *hostdevs,
int nhostdevs,
virQEMUCapsPtr qemuCaps)
{
virPCIDeviceListPtr pcidevs = NULL;
int last_processed_hostdev_vf = -1;
size_t i;
int ret = -1;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
if (!qemuPrepareHostdevPCICheckSupport(hostdevs, nhostdevs, qemuCaps))
goto cleanup;
virObjectLock(driver->activePciHostdevs);
virObjectLock(driver->inactivePciHostdevs);
if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs)))
goto cleanup;
/* We have to use 9 loops here. *All* devices must
* be detached before we reset any of them, because
* in some cases you have to reset the whole PCI,
* which impacts all devices on it. Also, all devices
* must be reset before being marked as active.
*/
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
/* Loop 1: validate that non-managed device isn't in use, eg
* by checking that device is either un-bound, or bound
* to pci-stub.ko
*/
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
virPCIDevicePtr other;
if (!virPCIDeviceIsAssignable(dev, !cfg->relaxedACS)) {
virReportError(VIR_ERR_OPERATION_INVALID,
_("PCI device %s is not assignable"),
virPCIDeviceGetName(dev));
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
goto cleanup;
}
/* The device is in use by other active domain if
* the dev is in list driver->activePciHostdevs.
*/
if ((other = virPCIDeviceListFind(driver->activePciHostdevs, dev))) {
const char *other_name = virPCIDeviceGetUsedBy(other);
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
if (other_name)
virReportError(VIR_ERR_OPERATION_INVALID,
_("PCI device %s is in use by domain %s"),
virPCIDeviceGetName(dev), other_name);
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
else
virReportError(VIR_ERR_OPERATION_INVALID,
_("PCI device %s is already in use"),
virPCIDeviceGetName(dev));
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
goto cleanup;
}
}
/* Loop 2: detach managed devices (i.e. bind to appropriate stub driver) */
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
if (virPCIDeviceGetManaged(dev) &&
virPCIDeviceDetach(dev, driver->activePciHostdevs, NULL) < 0)
goto reattachdevs;
}
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
/* Loop 3: Now that all the PCI hostdevs have been detached, we
* can safely reset them */
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
if (virPCIDeviceReset(dev, driver->activePciHostdevs,
driver->inactivePciHostdevs) < 0)
goto reattachdevs;
}
/* Loop 4: For SRIOV network devices, Now that we have detached the
* the network device, set the netdev config */
for (i = 0; i < nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
if (hostdev->parent.type == VIR_DOMAIN_DEVICE_NET &&
hostdev->parent.data.net) {
if (qemuDomainHostdevNetConfigReplace(hostdev, uuid,
cfg->stateDir) < 0) {
goto resetvfnetconfig;
}
}
last_processed_hostdev_vf = i;
}
/* Loop 5: Now mark all the devices as active */
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
if (virPCIDeviceListAdd(driver->activePciHostdevs, dev) < 0)
goto inactivedevs;
}
/* Loop 6: Now remove the devices from inactive list. */
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
virPCIDeviceListDel(driver->inactivePciHostdevs, dev);
}
/* Loop 7: Now set the used_by_domain of the device in
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
* driver->activePciHostdevs as domain name.
*/
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
virPCIDevicePtr dev, activeDev;
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
dev = virPCIDeviceListGet(pcidevs, i);
activeDev = virPCIDeviceListFind(driver->activePciHostdevs, dev);
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
if (activeDev)
virPCIDeviceSetUsedBy(activeDev, name);
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
}
/* Loop 8: Now set the original states for hostdev def */
for (i = 0; i < nhostdevs; i++) {
virPCIDevicePtr dev;
virPCIDevicePtr pcidev;
virDomainHostdevDefPtr hostdev = hostdevs[i];
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain,
hostdev->source.subsys.u.pci.addr.bus,
hostdev->source.subsys.u.pci.addr.slot,
hostdev->source.subsys.u.pci.addr.function);
/* original states "unbind_from_stub", "remove_slot",
* "reprobe" were already set by pciDettachDevice in
* loop 2.
*/
if ((pcidev = virPCIDeviceListFind(pcidevs, dev))) {
hostdev->origstates.states.pci.unbind_from_stub =
virPCIDeviceGetUnbindFromStub(pcidev);
hostdev->origstates.states.pci.remove_slot =
virPCIDeviceGetRemoveSlot(pcidev);
hostdev->origstates.states.pci.reprobe =
virPCIDeviceGetReprobe(pcidev);
}
virPCIDeviceFree(dev);
}
/* Loop 9: Now steal all the devices from pcidevs */
while (virPCIDeviceListCount(pcidevs) > 0)
virPCIDeviceListStealIndex(pcidevs, 0);
ret = 0;
goto cleanup;
inactivedevs:
/* Only steal all the devices from driver->activePciHostdevs. We will
* free them in virObjectUnref().
*/
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
virPCIDeviceListSteal(driver->activePciHostdevs, dev);
}
resetvfnetconfig:
for (i = 0;
last_processed_hostdev_vf != -1 && i < last_processed_hostdev_vf; i++)
qemuDomainHostdevNetConfigRestore(hostdevs[i], cfg->stateDir);
reattachdevs:
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
/* NB: This doesn't actually re-bind to original driver, just
* unbinds from the stub driver
*/
ignore_value(virPCIDeviceReattach(dev, driver->activePciHostdevs,
NULL));
}
cleanup:
virObjectUnlock(driver->activePciHostdevs);
virObjectUnlock(driver->inactivePciHostdevs);
virObjectUnref(pcidevs);
virObjectUnref(cfg);
return ret;
}
int
qemuPrepareHostdevUSBDevices(virQEMUDriverPtr driver,
const char *name,
virUSBDeviceListPtr list)
{
size_t i, j;
unsigned int count;
virUSBDevicePtr tmp;
virObjectLock(driver->activeUsbHostdevs);
count = virUSBDeviceListCount(list);
for (i = 0; i < count; i++) {
virUSBDevicePtr usb = virUSBDeviceListGet(list, i);
if ((tmp = virUSBDeviceListFind(driver->activeUsbHostdevs, usb))) {
const char *other_name = virUSBDeviceGetUsedBy(tmp);
if (other_name)
virReportError(VIR_ERR_OPERATION_INVALID,
_("USB device %s is in use by domain %s"),
virUSBDeviceGetName(tmp), other_name);
else
virReportError(VIR_ERR_OPERATION_INVALID,
_("USB device %s is already in use"),
virUSBDeviceGetName(tmp));
goto error;
}
virUSBDeviceSetUsedBy(usb, name);
VIR_DEBUG("Adding %03d.%03d dom=%s to activeUsbHostdevs",
virUSBDeviceGetBus(usb), virUSBDeviceGetDevno(usb), name);
/*
* The caller is responsible to steal these usb devices
* from the virUSBDeviceList that passed in on success,
* perform rollback on failure.
*/
if (virUSBDeviceListAdd(driver->activeUsbHostdevs, usb) < 0)
goto error;
}
virObjectUnlock(driver->activeUsbHostdevs);
return 0;
error:
for (j = 0; j < i; j++) {
tmp = virUSBDeviceListGet(list, i);
virUSBDeviceListSteal(driver->activeUsbHostdevs, tmp);
}
virObjectUnlock(driver->activeUsbHostdevs);
return -1;
}
int
qemuFindHostdevUSBDevice(virDomainHostdevDefPtr hostdev,
bool mandatory,
virUSBDevicePtr *usb)
{
unsigned vendor = hostdev->source.subsys.u.usb.vendor;
unsigned product = hostdev->source.subsys.u.usb.product;
unsigned bus = hostdev->source.subsys.u.usb.bus;
unsigned device = hostdev->source.subsys.u.usb.device;
bool autoAddress = hostdev->source.subsys.u.usb.autoAddress;
int rc;
*usb = NULL;
if (vendor && bus) {
rc = virUSBDeviceFind(vendor, product, bus, device,
NULL,
autoAddress ? false : mandatory,
usb);
if (rc < 0) {
return -1;
} else if (!autoAddress) {
goto out;
} else {
VIR_INFO("USB device %x:%x could not be found at previous"
" address (bus:%u device:%u)",
vendor, product, bus, device);
}
}
/* When vendor is specified, its USB address is either unspecified or the
* device could not be found at the USB device where it had been
* automatically found before.
*/
if (vendor) {
virUSBDeviceListPtr devs;
rc = virUSBDeviceFindByVendor(vendor, product, NULL, mandatory, &devs);
if (rc < 0)
return -1;
if (rc == 1) {
*usb = virUSBDeviceListGet(devs, 0);
virUSBDeviceListSteal(devs, *usb);
}
virObjectUnref(devs);
if (rc == 0) {
goto out;
} else if (rc > 1) {
if (autoAddress) {
virReportError(VIR_ERR_OPERATION_FAILED,
_("Multiple USB devices for %x:%x were found,"
" but none of them is at bus:%u device:%u"),
vendor, product, bus, device);
} else {
virReportError(VIR_ERR_OPERATION_FAILED,
_("Multiple USB devices for %x:%x, "
"use <address> to specify one"),
vendor, product);
}
return -1;
}
hostdev->source.subsys.u.usb.bus = virUSBDeviceGetBus(*usb);
hostdev->source.subsys.u.usb.device = virUSBDeviceGetDevno(*usb);
hostdev->source.subsys.u.usb.autoAddress = true;
if (autoAddress) {
VIR_INFO("USB device %x:%x found at bus:%u device:%u (moved"
" from bus:%u device:%u)",
vendor, product,
hostdev->source.subsys.u.usb.bus,
hostdev->source.subsys.u.usb.device,
bus, device);
}
} else if (!vendor && bus) {
if (virUSBDeviceFindByBus(bus, device, NULL, mandatory, usb) < 0)
return -1;
}
out:
if (!*usb)
hostdev->missing = true;
return 0;
}
static int
qemuPrepareHostUSBDevices(virQEMUDriverPtr driver,
virDomainDefPtr def,
bool coldBoot)
{
size_t i;
int ret = -1;
virUSBDeviceListPtr list;
virUSBDevicePtr tmp;
virDomainHostdevDefPtr *hostdevs = def->hostdevs;
int nhostdevs = def->nhostdevs;
/* To prevent situation where USB device is assigned to two domains
* we need to keep a list of currently assigned USB devices.
* This is done in several loops which cannot be joined into one big
* loop. See qemuPrepareHostdevPCIDevices()
*/
if (!(list = virUSBDeviceListNew()))
goto cleanup;
/* Loop 1: build temporary list
*/
for (i = 0; i < nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
bool required = true;
virUSBDevicePtr usb;
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB)
continue;
if (hostdev->startupPolicy == VIR_DOMAIN_STARTUP_POLICY_OPTIONAL ||
(hostdev->startupPolicy == VIR_DOMAIN_STARTUP_POLICY_REQUISITE &&
!coldBoot))
required = false;
if (qemuFindHostdevUSBDevice(hostdev, required, &usb) < 0)
goto cleanup;
if (usb && virUSBDeviceListAdd(list, usb) < 0) {
virUSBDeviceFree(usb);
goto cleanup;
}
}
/* Mark devices in temporary list as used by @name
* and add them do driver list. However, if something goes
* wrong, perform rollback.
*/
if (qemuPrepareHostdevUSBDevices(driver, def->name, list) < 0)
goto cleanup;
/* Loop 2: Temporary list was successfully merged with
* driver list, so steal all items to avoid freeing them
* in cleanup label.
*/
while (virUSBDeviceListCount(list) > 0) {
tmp = virUSBDeviceListGet(list, 0);
virUSBDeviceListSteal(list, tmp);
}
ret = 0;
cleanup:
virObjectUnref(list);
return ret;
}
int
qemuPrepareHostdevSCSIDevices(virQEMUDriverPtr driver,
const char *name,
virDomainHostdevDefPtr *hostdevs,
int nhostdevs)
{
size_t i, j;
int count;
virSCSIDeviceListPtr list;
virSCSIDevicePtr tmp;
/* Loop 1: Add the shared scsi host device to shared device
* table.
*/
for (i = 0; i < nhostdevs; i++) {
virDomainDeviceDef dev;
dev.type = VIR_DOMAIN_DEVICE_HOSTDEV;
dev.data.hostdev = hostdevs[i];
if (qemuAddSharedDevice(driver, &dev, name) < 0)
return -1;
if (qemuSetUnprivSGIO(&dev) < 0)
return -1;
}
/* To prevent situation where SCSI device is assigned to two domains
* we need to keep a list of currently assigned SCSI devices.
* This is done in several loops which cannot be joined into one big
* loop. See qemuPrepareHostdevPCIDevices()
*/
if (!(list = virSCSIDeviceListNew()))
goto cleanup;
/* Loop 2: build temporary list */
for (i = 0; i < nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
virSCSIDevicePtr scsi;
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS ||
hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI)
continue;
if (hostdev->managed) {
virReportError(VIR_ERR_XML_ERROR, "%s",
_("SCSI host device doesn't support managed mode"));
goto cleanup;
}
if (!(scsi = virSCSIDeviceNew(NULL,
hostdev->source.subsys.u.scsi.adapter,
hostdev->source.subsys.u.scsi.bus,
hostdev->source.subsys.u.scsi.target,
hostdev->source.subsys.u.scsi.unit,
hostdev->readonly,
hostdev->shareable)))
goto cleanup;
if (scsi && virSCSIDeviceListAdd(list, scsi) < 0) {
virSCSIDeviceFree(scsi);
goto cleanup;
}
}
/* Loop 3: Mark devices in temporary list as used by @name
* and add them to driver list. However, if something goes
* wrong, perform rollback.
*/
virObjectLock(driver->activeScsiHostdevs);
count = virSCSIDeviceListCount(list);
for (i = 0; i < count; i++) {
virSCSIDevicePtr scsi = virSCSIDeviceListGet(list, i);
if ((tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi))) {
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
bool scsi_shareable = virSCSIDeviceGetShareable(scsi);
bool tmp_shareable = virSCSIDeviceGetShareable(tmp);
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
if (!(scsi_shareable && tmp_shareable)) {
virReportError(VIR_ERR_OPERATION_INVALID,
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
_("SCSI device %s is already in use by "
"other domain(s) as '%s'"),
virSCSIDeviceGetName(tmp),
tmp_shareable ? "shareable" : "non-shareable");
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
goto error;
}
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
if (virSCSIDeviceSetUsedBy(tmp, name) < 0)
goto error;
} else {
if (virSCSIDeviceSetUsedBy(scsi, name) < 0)
goto error;
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
VIR_DEBUG("Adding %s to activeScsiHostdevs", virSCSIDeviceGetName(scsi));
if (virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0)
goto error;
}
}
virObjectUnlock(driver->activeScsiHostdevs);
/* Loop 4: Temporary list was successfully merged with
* driver list, so steal all items to avoid freeing them
* when freeing temporary list.
*/
while (virSCSIDeviceListCount(list) > 0) {
tmp = virSCSIDeviceListGet(list, 0);
virSCSIDeviceListSteal(list, tmp);
}
virObjectUnref(list);
return 0;
error:
for (j = 0; j < i; j++) {
tmp = virSCSIDeviceListGet(list, i);
virSCSIDeviceListSteal(driver->activeScsiHostdevs, tmp);
}
virObjectUnlock(driver->activeScsiHostdevs);
cleanup:
virObjectUnref(list);
return -1;
}
int
qemuPrepareHostDevices(virQEMUDriverPtr driver,
virDomainDefPtr def,
virQEMUCapsPtr qemuCaps,
bool coldBoot)
{
if (!def->nhostdevs)
return 0;
if (qemuPrepareHostdevPCIDevices(driver, def->name, def->uuid,
def->hostdevs, def->nhostdevs,
qemuCaps) < 0)
return -1;
if (qemuPrepareHostUSBDevices(driver, def, coldBoot) < 0)
return -1;
if (qemuPrepareHostdevSCSIDevices(driver, def->name,
def->hostdevs, def->nhostdevs) < 0)
return -1;
return 0;
}
/*
* Pre-condition: driver->inactivePciHostdevs & driver->activePciHostdevs
* are locked
*/
void
qemuReattachPciDevice(virPCIDevicePtr dev, virQEMUDriverPtr driver)
{
int retries = 100;
/* If the device is not managed and was attached to guest
* successfully, it must have been inactive.
*/
if (!virPCIDeviceGetManaged(dev)) {
if (virPCIDeviceListAdd(driver->inactivePciHostdevs, dev) < 0)
virPCIDeviceFree(dev);
return;
}
while (virPCIDeviceWaitForCleanup(dev, "kvm_assigned_device")
&& retries) {
usleep(100*1000);
retries--;
}
if (virPCIDeviceReattach(dev, driver->activePciHostdevs,
driver->inactivePciHostdevs) < 0) {
virErrorPtr err = virGetLastError();
VIR_ERROR(_("Failed to re-attach PCI device: %s"),
err ? err->message : _("unknown error"));
virResetError(err);
}
virPCIDeviceFree(dev);
}
void
qemuDomainReAttachHostdevDevices(virQEMUDriverPtr driver,
const char *name,
virDomainHostdevDefPtr *hostdevs,
int nhostdevs)
{
virPCIDeviceListPtr pcidevs;
size_t i;
virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
virObjectLock(driver->activePciHostdevs);
virObjectLock(driver->inactivePciHostdevs);
if (!(pcidevs = qemuGetActivePciHostDeviceList(driver,
hostdevs,
nhostdevs))) {
virErrorPtr err = virGetLastError();
VIR_ERROR(_("Failed to allocate PCI device list: %s"),
err ? err->message : _("unknown error"));
virResetError(err);
goto cleanup;
}
/* Again 4 loops; mark all devices as inactive before reset
* them and reset all the devices before re-attach.
* Attach mac and port profile parameters to devices
*/
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
virPCIDevicePtr activeDev = NULL;
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
/* delete the copy of the dev from pcidevs if it's used by
* other domain. Or delete it from activePciHostDevs if it had
* been used by this domain.
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
*/
activeDev = virPCIDeviceListFind(driver->activePciHostdevs, dev);
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
if (activeDev &&
STRNEQ_NULLABLE(name, virPCIDeviceGetUsedBy(activeDev))) {
virPCIDeviceListDel(pcidevs, dev);
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
continue;
qemu: Do not free the device from activePciHostdevs if it's in use * src/qemu/qemu_hostdev.c (qemuDomainReAttachHostdevDevices): pciDeviceListFree(pcidevs) in the end free()s the device even if it's in use by other domain, which can cause a race. How to reproduce: <script> virsh nodedev-dettach pci_0000_00_19_0 virsh start test virsh attach-device test hostdev.xml virsh start test2 for i in {1..5}; do echo "[ -- ${i}th time --]" virsh nodedev-reattach pci_0000_00_19_0 done echo "clean up" virsh destroy test virsh nodedev-reattach pci_0000_00_19_0 </script> Device pci_0000_00_19_0 dettached Domain test started Device attached successfully error: Failed to start domain test2 error: Requested operation is not valid: PCI device 0000:00:19.0 is in use by domain test [ -- 1th time --] Device pci_0000_00_19_0 re-attached [ -- 2th time --] Device pci_0000_00_19_0 re-attached [ -- 3th time --] Device pci_0000_00_19_0 re-attached [ -- 4th time --] Device pci_0000_00_19_0 re-attached [ -- 5th time --] Device pci_0000_00_19_0 re-attached clean up Domain test destroyed Device pci_0000_00_19_0 re-attached The patch also fixes another problem, there won't be error like "qemuDomainReAttachHostdevDevices: Not reattaching active device 0000:00:19.0" in daemon log if some device is in active. As pciResetDevice and pciReattachDevice won't be called for the device anymore. This is sensible as we already reported error when preparing the device if it's active. Blindly trying to pciResetDevice & pciReattachDevice on the device and getting an error is just redundant.
2011-11-29 10:23:06 +00:00
}
qemu: Do not reattach PCI device used by other domain when shutdown When failing on starting a domain, it tries to reattach all the PCI devices defined in the domain conf, regardless of whether the devices are still used by other domain. This will cause the devices to be deleted from the list qemu_driver->activePciHostdevs, thus the devices will be thought as usable even if it's not true. And following commands nodedev-{reattach,reset} will be successful. How to reproduce: 1) Define two domains with same PCI device defined in the confs. 2) # virsh start domain1 3) # virsh start domain2 4) # virsh nodedev-reattach $pci_device You will see the device will be reattached to host successfully. As pciDeviceReattach just check if the device is still used by other domain via checking if the device is in list driver->activePciHostdevs, however, the device is deleted from the list by step 2). This patch is to prohibit the bug by: 1) Prohibit a domain starting or device attachment right at preparation period (qemuPrepareHostdevPCIDevices) if the device is in list driver->activePciHostdevs, which means it's used by other domain. 2) Introduces a new field for struct _pciDevice, (const char *used_by), it will be set as the domain name at preparation period, (qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting the device from driver->activePciHostdevs if it's still used by other domain when stopping the domain process. * src/pci.h (define two internal functions, pciDeviceSetUsedBy and pciDevceGetUsedBy) * src/pci.c (new field "const char *used_by" for struct _pciDevice, implementations for the two new functions) * src/libvirt_private.syms (Add the two new internal functions) * src/qemu_hostdev.h (Modify the definition of functions qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices) * src/qemu_hostdev.c (Prohibit preparation and don't delete the device from activePciHostdevs list if it's still used by other domain) * src/qemu_hotplug.c (Update function usage, as the definitions are changed) Signed-off-by: Eric Blake <eblake@redhat.com>
2011-10-13 04:05:04 +00:00
virPCIDeviceListDel(driver->activePciHostdevs, dev);
}
/* At this point, any device that had been used by the guest is in
* pcidevs, but has been removed from activePciHostdevs.
*/
/*
* For SRIOV net host devices, unset mac and port profile before
* reset and reattach device
*/
for (i = 0; i < nhostdevs; i++)
qemuDomainHostdevNetConfigRestore(hostdevs[i], cfg->stateDir);
for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
if (virPCIDeviceReset(dev, driver->activePciHostdevs,
driver->inactivePciHostdevs) < 0) {
virErrorPtr err = virGetLastError();
VIR_ERROR(_("Failed to reset PCI device: %s"),
err ? err->message : _("unknown error"));
virResetError(err);
}
}
while (virPCIDeviceListCount(pcidevs) > 0) {
virPCIDevicePtr dev = virPCIDeviceListStealIndex(pcidevs, 0);
qemuReattachPciDevice(dev, driver);
}
virObjectUnref(pcidevs);
cleanup:
virObjectUnlock(driver->activePciHostdevs);
virObjectUnlock(driver->inactivePciHostdevs);
virObjectUnref(cfg);
}
static void
qemuDomainReAttachHostUsbDevices(virQEMUDriverPtr driver,
const char *name,
virDomainHostdevDefPtr *hostdevs,
int nhostdevs)
{
size_t i;
virObjectLock(driver->activeUsbHostdevs);
for (i = 0; i < nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
virUSBDevicePtr usb, tmp;
const char *used_by = NULL;
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB)
continue;
if (hostdev->missing)
continue;
usb = virUSBDeviceNew(hostdev->source.subsys.u.usb.bus,
hostdev->source.subsys.u.usb.device,
NULL);
if (!usb) {
VIR_WARN("Unable to reattach USB device %03d.%03d on domain %s",
hostdev->source.subsys.u.usb.bus,
hostdev->source.subsys.u.usb.device,
name);
continue;
}
/* Delete only those USB devices which belongs
* to domain @name because qemuProcessStart() might
* have failed because USB device is already taken.
* Therefore we want to steal only those devices from
* the list which were taken by @name */
tmp = virUSBDeviceListFind(driver->activeUsbHostdevs, usb);
virUSBDeviceFree(usb);
if (!tmp) {
VIR_WARN("Unable to find device %03d.%03d "
"in list of active USB devices",
hostdev->source.subsys.u.usb.bus,
hostdev->source.subsys.u.usb.device);
continue;
}
used_by = virUSBDeviceGetUsedBy(tmp);
if (STREQ_NULLABLE(used_by, name)) {
VIR_DEBUG("Removing %03d.%03d dom=%s from activeUsbHostdevs",
hostdev->source.subsys.u.usb.bus,
hostdev->source.subsys.u.usb.device,
name);
virUSBDeviceListDel(driver->activeUsbHostdevs, tmp);
}
}
virObjectUnlock(driver->activeUsbHostdevs);
}
void
qemuDomainReAttachHostScsiDevices(virQEMUDriverPtr driver,
const char *name,
virDomainHostdevDefPtr *hostdevs,
int nhostdevs)
{
size_t i;
virObjectLock(driver->activeScsiHostdevs);
for (i = 0; i < nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
virSCSIDevicePtr scsi;
virSCSIDevicePtr tmp;
virDomainDeviceDef dev;
dev.type = VIR_DOMAIN_DEVICE_HOSTDEV;
dev.data.hostdev = hostdev;
ignore_value(qemuRemoveSharedDevice(driver, &dev, name));
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS ||
hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI)
continue;
if (!(scsi = virSCSIDeviceNew(NULL,
hostdev->source.subsys.u.scsi.adapter,
hostdev->source.subsys.u.scsi.bus,
hostdev->source.subsys.u.scsi.target,
hostdev->source.subsys.u.scsi.unit,
hostdev->readonly,
hostdev->shareable))) {
VIR_WARN("Unable to reattach SCSI device %s:%d:%d:%d on domain %s",
hostdev->source.subsys.u.scsi.adapter,
hostdev->source.subsys.u.scsi.bus,
hostdev->source.subsys.u.scsi.target,
hostdev->source.subsys.u.scsi.unit,
name);
continue;
}
/* Only delete the devices which are marked as being used by @name,
* because qemuProcessStart could fail on the half way. */
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
if (!(tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi))) {
VIR_WARN("Unable to find device %s:%d:%d:%d "
"in list of active SCSI devices",
hostdev->source.subsys.u.scsi.adapter,
hostdev->source.subsys.u.scsi.bus,
hostdev->source.subsys.u.scsi.target,
hostdev->source.subsys.u.scsi.unit);
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
virSCSIDeviceFree(scsi);
continue;
}
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
VIR_DEBUG("Removing %s:%d:%d:%d dom=%s from activeScsiHostdevs",
hostdev->source.subsys.u.scsi.adapter,
hostdev->source.subsys.u.scsi.bus,
hostdev->source.subsys.u.scsi.target,
hostdev->source.subsys.u.scsi.unit,
name);
qemu: Don't fail if the SCSI host device is shareable between domains It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: Osier Yang <jyang@redhat.com>
2014-01-29 17:22:42 +00:00
virSCSIDeviceListDel(driver->activeScsiHostdevs, tmp, name);
virSCSIDeviceFree(scsi);
}
virObjectUnlock(driver->activeScsiHostdevs);
}
void
qemuDomainReAttachHostDevices(virQEMUDriverPtr driver,
virDomainDefPtr def)
{
if (!def->nhostdevs)
return;
qemuDomainReAttachHostdevDevices(driver, def->name, def->hostdevs,
def->nhostdevs);
qemuDomainReAttachHostUsbDevices(driver, def->name, def->hostdevs,
def->nhostdevs);
qemuDomainReAttachHostScsiDevices(driver, def->name, def->hostdevs,
def->nhostdevs);
}