External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-09-14 11:44:56 +00:00
Code Issues Packages Projects Releases Wiki Activity
95aed7febc
libvirt/tests/qemucapabilitiesdata/caps_1.6.0-1.caps

146 lines
4.4 KiB
Plaintext
Raw Normal View History

qemucapabilitiesdata: Add qemu-1.6.0 data Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 13:02:02 +00:00
<qemuCaps>
<flag name='vnc-colon'/>
<flag name='no-reboot'/>
<flag name='drive'/>
<flag name='name'/>
<flag name='uuid'/>
<flag name='vnet-hdr'/>
<flag name='migrate-qemu-tcp'/>
<flag name='migrate-qemu-exec'/>
<flag name='drive-cache-v2'/>
<flag name='drive-format'/>
<flag name='vga'/>
<flag name='0.10'/>
<flag name='mem-path'/>
<flag name='drive-serial'/>
<flag name='migrate-qemu-unix'/>
<flag name='chardev'/>
<flag name='enable-kvm'/>
<flag name='monitor-json'/>
<flag name='balloon'/>
<flag name='device'/>
<flag name='sdl'/>
<flag name='smp-topology'/>
<flag name='netdev'/>
<flag name='rtc'/>
<flag name='vhost-net'/>
<flag name='no-hpet'/>
<flag name='no-kvm-pit'/>
<flag name='pci-configfd'/>
<flag name='nodefconfig'/>
<flag name='boot-menu'/>
<flag name='fsdev'/>
<flag name='name-process'/>
<flag name='drive-readonly'/>
<flag name='smbios-type'/>
<flag name='vga-qxl'/>
<flag name='spice'/>
<flag name='vga-none'/>
<flag name='migrate-qemu-fd'/>
<flag name='boot-index'/>
<flag name='hda-duplex'/>
<flag name='drive-aio'/>
<flag name='pci-multibus'/>
<flag name='pci-bootindex'/>
<flag name='ccid-emulated'/>
<flag name='ccid-passthru'/>
<flag name='chardev-spicevmc'/>
<flag name='virtio-tx-alg'/>
<flag name='device-qxl-vga'/>
<flag name='pci-multifunction'/>
<flag name='virtio-blk-pci.ioeventfd'/>
<flag name='sga'/>
<flag name='virtio-blk-pci.event_idx'/>
<flag name='virtio-net-pci.event_idx'/>
<flag name='cache-directsync'/>
<flag name='piix3-usb-uhci'/>
<flag name='piix4-usb-uhci'/>
<flag name='usb-ehci'/>
<flag name='ich9-usb-ehci1'/>
<flag name='vt82c686b-usb-uhci'/>
<flag name='pci-ohci'/>
<flag name='usb-hub'/>
<flag name='no-shutdown'/>
<flag name='cache-unsafe'/>
<flag name='rombar'/>
<flag name='ich9-ahci'/>
<flag name='no-acpi'/>
<flag name='fsdev-readonly'/>
<flag name='virtio-blk-pci.scsi'/>
<flag name='blk-sg-io'/>
<flag name='drive-copy-on-read'/>
<flag name='cpu-host'/>
<flag name='fsdev-writeout'/>
<flag name='drive-iotune'/>
<flag name='system_wakeup'/>
<flag name='scsi-disk.channel'/>
<flag name='scsi-block'/>
<flag name='transaction'/>
<flag name='block-job-async'/>
<flag name='scsi-cd'/>
<flag name='ide-cd'/>
<flag name='no-user-config'/>
<flag name='hda-micro'/>
<flag name='dump-guest-memory'/>
<flag name='nec-usb-xhci'/>
<flag name='balloon-event'/>
<flag name='bridge'/>
<flag name='lsi'/>
<flag name='virtio-scsi-pci'/>
<flag name='blockio'/>
<flag name='disable-s3'/>
<flag name='disable-s4'/>
<flag name='ide-drive.wwn'/>
<flag name='scsi-disk.wwn'/>
<flag name='seccomp-sandbox'/>
<flag name='dump-guest-core'/>
<flag name='seamless-migration'/>
<flag name='block-commit'/>
<flag name='vnc'/>
<flag name='drive-mirror'/>
<flag name='usb-host.bootindex'/>
<flag name='blockdev-snapshot-sync'/>
<flag name='qxl'/>
<flag name='VGA'/>
<flag name='cirrus-vga'/>
<flag name='vmware-svga'/>
<flag name='device-video-primary'/>
<flag name='usb-serial'/>
<flag name='usb-net'/>
<flag name='add-fd'/>
<flag name='nbd-server'/>
<flag name='virtio-rng'/>
<flag name='rng-random'/>
<flag name='rng-egd'/>
<flag name='dtb'/>
<flag name='megasas'/>
<flag name='ipv6-migration'/>
<flag name='machine-opt'/>
<flag name='machine-usb-opt'/>
<flag name='pci-bridge'/>
<flag name='vfio-pci'/>
<flag name='vfio-pci.bootindex'/>
<flag name='scsi-generic'/>
<flag name='scsi-generic.bootindex'/>
<flag name='mem-merge'/>
<flag name='vnc-websocket'/>
<flag name='mlock'/>
<flag name='vnc-share-policy'/>
<flag name='device-del-event'/>
<flag name='dmi-to-pci-bridge'/>
<flag name='i440fx-pci-hole64-size'/>
<flag name='q35-pci-hole64-size'/>
<flag name='usb-storage'/>
<flag name='usb-storage.removable'/>
<flag name='virtio-mmio'/>
<flag name='ich9-intel-hda'/>
qemu: don't use deprecated -no-kvm-pit-reinjection Since qemu-kvm 1.1 [1] (since 1.3. in upstream QEMU [2]) '-no-kvm-pit-reinjection' has been deprecated. Use -global kvm-pit.lost_tick_policy=discard instead. https://bugzilla.redhat.com/show_bug.cgi?id=978719 [1] http://git.kernel.org/cgit/virt/kvm/qemu-kvm.git/commit/?id=4e4fa39 [2] http://git.qemu.org/?p=qemu.git;a=commitdiff;h=c21fb4f
2013-07-01 16:28:50 +00:00
<flag name='kvm-pit-lost-tick-policy'/>
qemu: add "-boot strict" to commandline whenever possible This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=888635 (which was already closed as CANTFIX because the qemu "-boot strict" commandline option wasn't available at the time). Problem: you couldn't have a domain that used PXE to boot, but also had an un-bootable disk device *even if that disk wasn't listed in the boot order*, because if PXE timed out (e.g. due to the bridge forwarding delay), the BIOS would move on to the next target, which would be the unbootable disk device (again - even though it wasn't given a boot order), and get stuck at a "BOOT DISK FAILURE, PRESS ANY KEY" message until a user intervened. The solution available since sometime around QEMU 1.5, is to add "-boot strict=on" to *every* qemu command. When this is done, if any devices have a boot order specified, then QEMU will *only* attempt to boot from those devices that have an explicit boot order, ignoring the rest.
2013-12-02 12:07:12 +00:00
<flag name='boot-strict'/>
qemu: add support for -device pvpanic Map the new <panic> device in XML to the '-device pvpanic' command line of qemu. Clients can then couple the <panic> device and the <on_crash> directive to control behavior when the guest reports a panic to qemu. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-09 09:11:15 +00:00
<flag name='pvpanic'/>
qemu: check for reboot-timeout on monitor The support for <boot rebootTimeout="12345"/> was added before we were checking for qemu command line options in QMP, so we haven't properly adapted virQEMUCaps when using it and thus we report unsupported option with new enough qemu. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1042690 Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2013-12-13 13:51:24 +00:00
<flag name='reboot-timeout'/>
qemu: ask for -enable-fips when FIPS is required On a system that is enforcing FIPS, most libraries honor the current mode by default. Qemu, on the other hand, refused to honor FIPS mode unless you add the '-enable-fips' command line option; worse, this option is not discoverable via QMP, and is only present on binaries built for Linux. So, if we detect FIPS mode, then we unconditionally ask for FIPS; either qemu is new enough to have the option and then correctly cripple insecure VNC passwords, or it is so old that we are correctly avoiding a FIPS violation by preventing qemu from starting. Meanwhile, if we don't detect FIPS mode, then omitting the argument is safe whether the qemu has the option (but it would do nothing because FIPS is disabled) or whether qemu lacks the option (including in the case where we are not running on Linux). The testsuite was a bit interesting: we don't want our test to depend on whether it is being run in FIPS mode, so I had to tweak things to set the capability bit outside of our normal interaction with capability parsing. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1035474 * src/qemu/qemu_capabilities.h (QEMU_CAPS_ENABLE_FIPS): New bit. * src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Conditionally set capability according to detection of FIPS mode. * src/qemu/qemu_command.c (qemuBuildCommandLine): Use it. * tests/qemucapabilitiestest.c (testQemuCaps): Conditionally set capability to test expected output. * tests/qemucapabilitiesdata/caps_1.2.2-1.caps: Update list. * tests/qemucapabilitiesdata/caps_1.6.0-1.caps: Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-05 21:47:09 +00:00
<flag name='enable-fips'/>
spice: detect if qemu can disable file transfer spice-server offers an API to disable file transfer messages on the agent channel between the client and the guest. This is supported in qemu through the disable-agent-file-xfer option. This patch detects if QEMU supports this option, and add a capability if does. Signed-off-by: Francesco Romani <fromani@redhat.com>
2014-01-16 16:11:14 +00:00
<flag name='spice-file-xfer-disable'/>
qemu: introduce spiceport chardev backend Add a new backend for any character device. This backend uses channel in spice connection. This channel is similar to spicevmc, but all-purpose in contrast to spicevmc. Apart from spicevmc, spiceport-backed chardev will not be formatted into the command-line if there is no spice to use (with test for that as well). For this I moved the def->graphics counting to the start of the function so its results can be used in rest of the code even in the future. Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-01-30 11:19:12 +00:00
<flag name='spiceport'/>
qemu: Add USB keyboard capability Add USB keyboard capability probing and test cases. Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-02-17 10:17:55 +00:00
<flag name='usb-kbd'/>
qemucapabilitiesdata: Add qemu-1.6.0 data Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-10-03 13:02:02 +00:00
</qemuCaps>
Reference in New Issue Copy Permalink