qemu: support interface <teaming> functionality
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.
Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.
The result of this will be:
1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).
2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-23 20:34:53 +00:00
|
|
|
LC_ALL=C \
|
|
|
|
|
PATH=/bin \
|
|
|
|
|
HOME=/tmp/lib/domain--1-QEMUGuest1 \
|
|
|
|
|
USER=test \
|
|
|
|
|
LOGNAME=test \
|
|
|
|
|
XDG_DATA_HOME=/tmp/lib/domain--1-QEMUGuest1/.local/share \
|
|
|
|
|
XDG_CACHE_HOME=/tmp/lib/domain--1-QEMUGuest1/.cache \
|
|
|
|
|
XDG_CONFIG_HOME=/tmp/lib/domain--1-QEMUGuest1/.config \
|
|
|
|
|
QEMU_AUDIO_DRV=none \
|
|
|
|
|
/usr/bin/qemu-system-i386 \
|
2021-08-10 14:39:38 +00:00
|
|
|
-name guest=QEMUGuest1,debug-threads=on \
|
qemu: support interface <teaming> functionality
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.
Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.
The result of this will be:
1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).
2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-23 20:34:53 +00:00
|
|
|
-S \
|
2021-09-21 15:50:00 +00:00
|
|
|
-object secret,id=masterKey0,format=raw,file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
|
qemu: support interface <teaming> functionality
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.
Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.
The result of this will be:
1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).
2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-23 20:34:53 +00:00
|
|
|
-machine pc,accel=tcg,usb=off,dump-guest-core=off \
|
|
|
|
|
-m 214 \
|
|
|
|
|
-realtime mlock=off \
|
|
|
|
|
-smp 1,sockets=1,cores=1,threads=1 \
|
|
|
|
|
-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \
|
|
|
|
|
-display none \
|
|
|
|
|
-no-user-config \
|
|
|
|
|
-nodefaults \
|
2021-03-31 08:46:36 +00:00
|
|
|
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-QEMUGuest1/monitor.sock,server=on,wait=off \
|
qemu: support interface <teaming> functionality
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.
Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.
The result of this will be:
1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).
2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-23 20:34:53 +00:00
|
|
|
-mon chardev=charmonitor,id=monitor,mode=control \
|
|
|
|
|
-rtc base=utc \
|
|
|
|
|
-no-shutdown \
|
|
|
|
|
-no-acpi \
|
2021-09-20 14:22:59 +00:00
|
|
|
-boot strict=on \
|
qemu: support interface <teaming> functionality
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.
Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.
The result of this will be:
1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).
2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-23 20:34:53 +00:00
|
|
|
-usb \
|
|
|
|
|
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
|
|
|
|
|
-device ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 \
|
|
|
|
|
-netdev user,id=hostua-backup0 \
|
2021-03-30 15:48:46 +00:00
|
|
|
-device virtio-net-pci,failover=on,netdev=hostua-backup0,id=ua-backup0,mac=00:11:22:33:44:55,bus=pci.0,addr=0x2 \
|
qemu: support interface <teaming> functionality
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.
Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.
The result of this will be:
1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).
2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-23 20:34:53 +00:00
|
|
|
-netdev user,id=hostua-backup1 \
|
2021-03-30 15:48:46 +00:00
|
|
|
-device virtio-net-pci,failover=on,netdev=hostua-backup1,id=ua-backup1,mac=66:44:33:22:11:00,bus=pci.0,addr=0x3 \
|
|
|
|
|
-device vfio-pci,host=0000:03:07.1,id=hostdev0,bus=pci.0,addr=0x4,failover_pair_id=ua-backup0 \
|
|
|
|
|
-device vfio-pci,host=0000:03:07.2,id=hostdev1,bus=pci.0,addr=0x5,failover_pair_id=ua-backup1 \
|
2021-08-10 15:07:10 +00:00
|
|
|
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 \
|
|
|
|
|
-msg timestamp=on
|
