libvirt/daemon/Makefile.am

473 lines
14 KiB
Makefile
Raw Normal View History

2007-02-14 01:40:09 +00:00
## Process this file with automake to produce Makefile.in
build: add $(prefix) to SYSTEMD_UNIT_DIR I noticed this problem when adding systemd support to netcf, because I setup the configure.ac to automatically prefer using systemd over initscripts when possible - although I had copied the install-data-local target from the example of libvirt's "libvirt-guests" service more or less verbatim, "make distcheck" would fail because it was trying to install the service file directly into /lib/systemd/system rather than into /home/user/some/unimportant/name/lib/systemd/system. This is caused by the install/uninstall rules for the systemd unit files relying on $(DESTDIR) pointing the installed files to the right place, but in reality $(DESTDIR) is empty during this part of make distcheck - it instead sets $(prefix) with the toplevel directory used for its test build/install/uninstall cycle. (This problem hasn't been seen when running "make distcheck" in libvirt because libvirt will never build/install systemd support unless explicitly told to do so on the configure commandline, and "make distcheck" doesn't put the "--with-initscript=..." option on the configure commandline.) I verified that the same problem does exist in libvirt by modifying libvirt's configure.ac to set: init_systemd=yes with_init_script=systemd+redhat This forces a build/install of the systemd unit files during distcheck, which yields an error like this: /usr/bin/install -c -m 644 virtlockd.service \ /lib/systemd/system/ libtool: install: warning: relinking `libvirt-qemu.la' /usr/bin/install: cannot remove '/lib/systemd/system/virtlockd.service': Permission denied make[4]: *** [install-systemd] Error 1 After adding $(prefix) to all the definitions of SYSTEMD_UNIT_DIR, make distcheck now completes successfully with the modified configure.ac, and the above lines change to something like this: /usr/bin/install -c -m 644 virtlockd.service \ /home/laine/devel/libvirt/libvirt-1.2.1/_inst/lib/systemd/system/
2014-01-17 12:11:58 +00:00
## Copyright (C) 2005-2014 Red Hat, Inc.
maint: use LGPL correctly Several files called out COPYING or COPYING.LIB instead of using the normal boilerplate. It's especially important that we don't call out COPYING from an LGPL file, since COPYING is traditionally used for the GPL. A few files were lacking copyright altogether. * src/rpc/gendispatch.pl: Add missing copyright. * Makefile.nonreentrant: Likewise. * src/check-symfile.pl: Likewise. * src/check-symsorting.pl: Likewise. * src/driver.h: Likewise. * src/internal.h: Likewise. * tools/libvirt-guests.sh.in: Likewise. * tools/virt-pki-validate.in: Mention copyright in comment, not just code. * tools/virt-sanlock-cleanup.in: Likewise. * src/rpc/genprotocol.pl: Spell out license terms. * src/xen/xend_internal.h: Likewise. * src/xen/xend_internal.c: Likewise. * Makefile.am: Likewise. * daemon/Makefile.am: Likewise. * docs/Makefile.am: Likewise. * docs/schemas/Makefile.am: Likewise. * examples/apparmor/Makefile.am: Likewise. * examples/domain-events/events-c/Makefile.am: Likewise. * examples/dominfo/Makefile.am: Likewise. * examples/domsuspend/Makefile.am: Likewise. * examples/hellolibvirt/Makefile.am: Likewise. * examples/openauth/Makefile.am: Likewise. * examples/python/Makefile.am: Likewise. * examples/systemtap/Makefile.am: Likewise. * examples/xml/nwfilter/Makefile.am: Likewise. * gnulib/lib/Makefile.am: Likewise. * gnulib/tests/Makefile.am: Likewise. * include/Makefile.am: Likewise. * include/libvirt/Makefile.am: Likewise. * python/Makefile.am: Likewise. * python/tests/Makefile.am: Likewise. * src/Makefile.am: Likewise. * tests/Makefile.am: Likewise. * tools/Makefile.am: Likewise. * configure.ac: Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-14 23:42:12 +00:00
##
## This library is free software; you can redistribute it and/or
## modify it under the terms of the GNU Lesser General Public
## License as published by the Free Software Foundation; either
## version 2.1 of the License, or (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
## Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public
## License along with this library. If not, see
## <http://www.gnu.org/licenses/>.
INCLUDES = \
-I$(top_builddir)/gnulib/lib -I$(top_srcdir)/gnulib/lib \
-I$(top_srcdir) \
-I$(top_builddir)/include -I$(top_srcdir)/include \
-I$(top_builddir)/src -I$(top_srcdir)/src \
-I$(top_srcdir)/src/util \
-I$(top_srcdir)/src/conf \
-I$(top_srcdir)/src/rpc \
-I$(top_srcdir)/src/remote \
-I$(top_srcdir)/src/access \
$(GETTEXT_CPPFLAGS)
Add dtrace static probes in libvirtd Adds initial support for dtrace static probes in libvirtd daemon, assuming use of systemtap dtrace compat shim on Linux. The probes are inserted for network client connect, disconnect, TLS handshake states and authentication protocol states. This can be tested by running the xample program and then attempting to connect with any libvirt client (virsh, virt-manager, etc). # stap examples/systemtap/client.stp Client fd=44 connected readonly=0 Client fd=44 auth polkit deny pid:24997,uid:500 Client fd=44 disconnected Client fd=46 connected readonly=1 Client fd=46 auth sasl allow test Client fd=46 disconnected The libvirtd.stp file should also really not be required, since it is duplicated info that is already available in the main probes.d definition file. A script to autogenerate the .stp file is needed, either in libvirtd tree, or better as part of systemtap itself. * Makefile.am: Add examples/systemtap subdir * autobuild.sh: Disable dtrace for mingw32 * configure.ac: Add check for dtrace * daemon/.gitignore: Ignore generated dtrace probe file * daemon/Makefile.am: Build dtrace probe header & object files * daemon/libvirtd.stp: SystemTAP convenience probeset * daemon/libvirtd.c: Add connect/disconnect & TLS probes * daemon/remote.c: Add SASL and PolicyKit auth probes * daemon/probes.d: Master probe definition * daemon/libvirtd.h: Add convenience macro for probes so that compilation is a no-op when dtrace is not available * examples/systemtap/Makefile.am, examples/systemtap/client.stp Example systemtap script using dtrace probe markers * libvirt.spec.in: Enable dtrace on F13/RHEL6 * mingw32-libvirt.spec.in: Force disable dtrace
2010-09-14 16:30:32 +00:00
CLEANFILES =
build: avoid $(srcdir) in *_SOURCES Trying to enable automake's subdir-objects option resulted in the creation of literal directories such as src/$(srcdir)/remote/. I traced this to the fact that we had used a literal $(srcdir) in a location that later fed an automake *_SOURCES variable. This has also been reported as an automake bug: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13928 but it's better to fix our code than to wait for an automake fix. Some things to remember that affect VPATH builds, and where an in-tree build is blissfully unaware of the issues: if a VPATH build fails to find a file that was used as a prereq of any other target, then the rule for that file will expand $@ to prefer the current build dir (bad because a VPATH build on a fresh checkout will then stick $@ in the current directory instead of the desired srcdir); conversely, if a VPATH build finds the file in srcdir but decides it needs to be rebuilt, then the rule for that file will expand $@ to include the directory where it was found out-of-date (bad for an explicit listing of $(srcdir)/$@ because an incremental VPATH build will then expand srcdir twice). As we want these files to go into srcdir unconditionally, we have to massage or avoid $@ for any recipe that involves one of these files. Therefore, this patch removes all uses of $(srcdir) from any generated file name that later feeds a *_SOURCES variable, and then rewrites all the recipes to generate those files to hard-code their creation into srcdir without the use of $@. * src/Makefile.am (REMOTE_DRIVER_GENERATED): Drop $(srcdir); VPATH builds know how to find the files, and automake subdir-objects fails with it in place. (LXC_MONITOR_PROTOCOL_GENERATED, (LXC_MONITOR_GENERATED) (ACCESS_DRIVER_GENERATED, LOCK_PROTOCOL_GENERATED): Likewise. (*_client_bodies.h): Hard-code rules to write into srcdir, as VPATH tries to build $@ locally if missing. (util/virkeymaps.h): Likewise. (lxc/lxc_monitor_dispatch.h): Likewise. (access/viraccessapi*): Likewise. (locking/lock_daemon_dispatch_stubs.h): Likewise. * daemon/Makeflie.am (DAEMON_GENERATED, remote_dispatch.h): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com> fixup DAEMON_GENERATED
2013-09-06 22:54:39 +00:00
DAEMON_GENERATED = \
remote_dispatch.h \
lxc_dispatch.h \
qemu_dispatch.h \
$(NULL)
DAEMON_SOURCES = \
libvirtd.c libvirtd.h \
remote.c remote.h \
stream.c stream.h \
$(DAEMON_GENERATED)
LIBVIRTD_CONF_SOURCES = libvirtd-config.c libvirtd-config.h
DISTCLEANFILES =
EXTRA_DIST = \
remote_dispatch.h \
lxc_dispatch.h \
qemu_dispatch.h \
libvirtd.conf \
libvirtd.init.in \
libvirtd.upstart \
libvirtd.policy.in \
libvirtd.sasl \
libvirtd.service.in \
libvirtd.sysconf \
libvirtd.sysctl \
libvirtd.aug \
libvirtd.logrotate.in \
libvirtd.qemu.logrotate.in \
libvirtd.lxc.logrotate.in \
libvirtd.uml.logrotate.in \
test_libvirtd.aug.in \
THREADS.txt \
libvirtd.pod.in \
libvirtd.8.in \
$(DAEMON_SOURCES) \
$(LIBVIRTD_CONF_SOURCES) \
$(NULL)
BUILT_SOURCES =
REMOTE_PROTOCOL = $(top_srcdir)/src/remote/remote_protocol.x
LXC_PROTOCOL = $(top_srcdir)/src/remote/lxc_protocol.x
QEMU_PROTOCOL = $(top_srcdir)/src/remote/qemu_protocol.x
build: avoid $(srcdir) in *_SOURCES Trying to enable automake's subdir-objects option resulted in the creation of literal directories such as src/$(srcdir)/remote/. I traced this to the fact that we had used a literal $(srcdir) in a location that later fed an automake *_SOURCES variable. This has also been reported as an automake bug: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13928 but it's better to fix our code than to wait for an automake fix. Some things to remember that affect VPATH builds, and where an in-tree build is blissfully unaware of the issues: if a VPATH build fails to find a file that was used as a prereq of any other target, then the rule for that file will expand $@ to prefer the current build dir (bad because a VPATH build on a fresh checkout will then stick $@ in the current directory instead of the desired srcdir); conversely, if a VPATH build finds the file in srcdir but decides it needs to be rebuilt, then the rule for that file will expand $@ to include the directory where it was found out-of-date (bad for an explicit listing of $(srcdir)/$@ because an incremental VPATH build will then expand srcdir twice). As we want these files to go into srcdir unconditionally, we have to massage or avoid $@ for any recipe that involves one of these files. Therefore, this patch removes all uses of $(srcdir) from any generated file name that later feeds a *_SOURCES variable, and then rewrites all the recipes to generate those files to hard-code their creation into srcdir without the use of $@. * src/Makefile.am (REMOTE_DRIVER_GENERATED): Drop $(srcdir); VPATH builds know how to find the files, and automake subdir-objects fails with it in place. (LXC_MONITOR_PROTOCOL_GENERATED, (LXC_MONITOR_GENERATED) (ACCESS_DRIVER_GENERATED, LOCK_PROTOCOL_GENERATED): Likewise. (*_client_bodies.h): Hard-code rules to write into srcdir, as VPATH tries to build $@ locally if missing. (util/virkeymaps.h): Likewise. (lxc/lxc_monitor_dispatch.h): Likewise. (access/viraccessapi*): Likewise. (locking/lock_daemon_dispatch_stubs.h): Likewise. * daemon/Makeflie.am (DAEMON_GENERATED, remote_dispatch.h): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com> fixup DAEMON_GENERATED
2013-09-06 22:54:39 +00:00
remote_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
$(REMOTE_PROTOCOL)
$(AM_V_GEN)$(PERL) -w $(srcdir)/../src/rpc/gendispatch.pl \
build: avoid $(srcdir) in *_SOURCES Trying to enable automake's subdir-objects option resulted in the creation of literal directories such as src/$(srcdir)/remote/. I traced this to the fact that we had used a literal $(srcdir) in a location that later fed an automake *_SOURCES variable. This has also been reported as an automake bug: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13928 but it's better to fix our code than to wait for an automake fix. Some things to remember that affect VPATH builds, and where an in-tree build is blissfully unaware of the issues: if a VPATH build fails to find a file that was used as a prereq of any other target, then the rule for that file will expand $@ to prefer the current build dir (bad because a VPATH build on a fresh checkout will then stick $@ in the current directory instead of the desired srcdir); conversely, if a VPATH build finds the file in srcdir but decides it needs to be rebuilt, then the rule for that file will expand $@ to include the directory where it was found out-of-date (bad for an explicit listing of $(srcdir)/$@ because an incremental VPATH build will then expand srcdir twice). As we want these files to go into srcdir unconditionally, we have to massage or avoid $@ for any recipe that involves one of these files. Therefore, this patch removes all uses of $(srcdir) from any generated file name that later feeds a *_SOURCES variable, and then rewrites all the recipes to generate those files to hard-code their creation into srcdir without the use of $@. * src/Makefile.am (REMOTE_DRIVER_GENERATED): Drop $(srcdir); VPATH builds know how to find the files, and automake subdir-objects fails with it in place. (LXC_MONITOR_PROTOCOL_GENERATED, (LXC_MONITOR_GENERATED) (ACCESS_DRIVER_GENERATED, LOCK_PROTOCOL_GENERATED): Likewise. (*_client_bodies.h): Hard-code rules to write into srcdir, as VPATH tries to build $@ locally if missing. (util/virkeymaps.h): Likewise. (lxc/lxc_monitor_dispatch.h): Likewise. (access/viraccessapi*): Likewise. (locking/lock_daemon_dispatch_stubs.h): Likewise. * daemon/Makeflie.am (DAEMON_GENERATED, remote_dispatch.h): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com> fixup DAEMON_GENERATED
2013-09-06 22:54:39 +00:00
--mode=server remote REMOTE $(REMOTE_PROTOCOL) \
> $(srcdir)/remote_dispatch.h
build: avoid $(srcdir) in *_SOURCES Trying to enable automake's subdir-objects option resulted in the creation of literal directories such as src/$(srcdir)/remote/. I traced this to the fact that we had used a literal $(srcdir) in a location that later fed an automake *_SOURCES variable. This has also been reported as an automake bug: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13928 but it's better to fix our code than to wait for an automake fix. Some things to remember that affect VPATH builds, and where an in-tree build is blissfully unaware of the issues: if a VPATH build fails to find a file that was used as a prereq of any other target, then the rule for that file will expand $@ to prefer the current build dir (bad because a VPATH build on a fresh checkout will then stick $@ in the current directory instead of the desired srcdir); conversely, if a VPATH build finds the file in srcdir but decides it needs to be rebuilt, then the rule for that file will expand $@ to include the directory where it was found out-of-date (bad for an explicit listing of $(srcdir)/$@ because an incremental VPATH build will then expand srcdir twice). As we want these files to go into srcdir unconditionally, we have to massage or avoid $@ for any recipe that involves one of these files. Therefore, this patch removes all uses of $(srcdir) from any generated file name that later feeds a *_SOURCES variable, and then rewrites all the recipes to generate those files to hard-code their creation into srcdir without the use of $@. * src/Makefile.am (REMOTE_DRIVER_GENERATED): Drop $(srcdir); VPATH builds know how to find the files, and automake subdir-objects fails with it in place. (LXC_MONITOR_PROTOCOL_GENERATED, (LXC_MONITOR_GENERATED) (ACCESS_DRIVER_GENERATED, LOCK_PROTOCOL_GENERATED): Likewise. (*_client_bodies.h): Hard-code rules to write into srcdir, as VPATH tries to build $@ locally if missing. (util/virkeymaps.h): Likewise. (lxc/lxc_monitor_dispatch.h): Likewise. (access/viraccessapi*): Likewise. (locking/lock_daemon_dispatch_stubs.h): Likewise. * daemon/Makeflie.am (DAEMON_GENERATED, remote_dispatch.h): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com> fixup DAEMON_GENERATED
2013-09-06 22:54:39 +00:00
lxc_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
$(LXC_PROTOCOL)
$(AM_V_GEN)$(PERL) -w $(srcdir)/../src/rpc/gendispatch.pl \
build: avoid $(srcdir) in *_SOURCES Trying to enable automake's subdir-objects option resulted in the creation of literal directories such as src/$(srcdir)/remote/. I traced this to the fact that we had used a literal $(srcdir) in a location that later fed an automake *_SOURCES variable. This has also been reported as an automake bug: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13928 but it's better to fix our code than to wait for an automake fix. Some things to remember that affect VPATH builds, and where an in-tree build is blissfully unaware of the issues: if a VPATH build fails to find a file that was used as a prereq of any other target, then the rule for that file will expand $@ to prefer the current build dir (bad because a VPATH build on a fresh checkout will then stick $@ in the current directory instead of the desired srcdir); conversely, if a VPATH build finds the file in srcdir but decides it needs to be rebuilt, then the rule for that file will expand $@ to include the directory where it was found out-of-date (bad for an explicit listing of $(srcdir)/$@ because an incremental VPATH build will then expand srcdir twice). As we want these files to go into srcdir unconditionally, we have to massage or avoid $@ for any recipe that involves one of these files. Therefore, this patch removes all uses of $(srcdir) from any generated file name that later feeds a *_SOURCES variable, and then rewrites all the recipes to generate those files to hard-code their creation into srcdir without the use of $@. * src/Makefile.am (REMOTE_DRIVER_GENERATED): Drop $(srcdir); VPATH builds know how to find the files, and automake subdir-objects fails with it in place. (LXC_MONITOR_PROTOCOL_GENERATED, (LXC_MONITOR_GENERATED) (ACCESS_DRIVER_GENERATED, LOCK_PROTOCOL_GENERATED): Likewise. (*_client_bodies.h): Hard-code rules to write into srcdir, as VPATH tries to build $@ locally if missing. (util/virkeymaps.h): Likewise. (lxc/lxc_monitor_dispatch.h): Likewise. (access/viraccessapi*): Likewise. (locking/lock_daemon_dispatch_stubs.h): Likewise. * daemon/Makeflie.am (DAEMON_GENERATED, remote_dispatch.h): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com> fixup DAEMON_GENERATED
2013-09-06 22:54:39 +00:00
--mode=server lxc LXC $(LXC_PROTOCOL) \
> $(srcdir)/lxc_dispatch.h
build: avoid $(srcdir) in *_SOURCES Trying to enable automake's subdir-objects option resulted in the creation of literal directories such as src/$(srcdir)/remote/. I traced this to the fact that we had used a literal $(srcdir) in a location that later fed an automake *_SOURCES variable. This has also been reported as an automake bug: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13928 but it's better to fix our code than to wait for an automake fix. Some things to remember that affect VPATH builds, and where an in-tree build is blissfully unaware of the issues: if a VPATH build fails to find a file that was used as a prereq of any other target, then the rule for that file will expand $@ to prefer the current build dir (bad because a VPATH build on a fresh checkout will then stick $@ in the current directory instead of the desired srcdir); conversely, if a VPATH build finds the file in srcdir but decides it needs to be rebuilt, then the rule for that file will expand $@ to include the directory where it was found out-of-date (bad for an explicit listing of $(srcdir)/$@ because an incremental VPATH build will then expand srcdir twice). As we want these files to go into srcdir unconditionally, we have to massage or avoid $@ for any recipe that involves one of these files. Therefore, this patch removes all uses of $(srcdir) from any generated file name that later feeds a *_SOURCES variable, and then rewrites all the recipes to generate those files to hard-code their creation into srcdir without the use of $@. * src/Makefile.am (REMOTE_DRIVER_GENERATED): Drop $(srcdir); VPATH builds know how to find the files, and automake subdir-objects fails with it in place. (LXC_MONITOR_PROTOCOL_GENERATED, (LXC_MONITOR_GENERATED) (ACCESS_DRIVER_GENERATED, LOCK_PROTOCOL_GENERATED): Likewise. (*_client_bodies.h): Hard-code rules to write into srcdir, as VPATH tries to build $@ locally if missing. (util/virkeymaps.h): Likewise. (lxc/lxc_monitor_dispatch.h): Likewise. (access/viraccessapi*): Likewise. (locking/lock_daemon_dispatch_stubs.h): Likewise. * daemon/Makeflie.am (DAEMON_GENERATED, remote_dispatch.h): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com> fixup DAEMON_GENERATED
2013-09-06 22:54:39 +00:00
qemu_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
$(QEMU_PROTOCOL)
$(AM_V_GEN)$(PERL) -w $(srcdir)/../src/rpc/gendispatch.pl \
build: avoid $(srcdir) in *_SOURCES Trying to enable automake's subdir-objects option resulted in the creation of literal directories such as src/$(srcdir)/remote/. I traced this to the fact that we had used a literal $(srcdir) in a location that later fed an automake *_SOURCES variable. This has also been reported as an automake bug: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13928 but it's better to fix our code than to wait for an automake fix. Some things to remember that affect VPATH builds, and where an in-tree build is blissfully unaware of the issues: if a VPATH build fails to find a file that was used as a prereq of any other target, then the rule for that file will expand $@ to prefer the current build dir (bad because a VPATH build on a fresh checkout will then stick $@ in the current directory instead of the desired srcdir); conversely, if a VPATH build finds the file in srcdir but decides it needs to be rebuilt, then the rule for that file will expand $@ to include the directory where it was found out-of-date (bad for an explicit listing of $(srcdir)/$@ because an incremental VPATH build will then expand srcdir twice). As we want these files to go into srcdir unconditionally, we have to massage or avoid $@ for any recipe that involves one of these files. Therefore, this patch removes all uses of $(srcdir) from any generated file name that later feeds a *_SOURCES variable, and then rewrites all the recipes to generate those files to hard-code their creation into srcdir without the use of $@. * src/Makefile.am (REMOTE_DRIVER_GENERATED): Drop $(srcdir); VPATH builds know how to find the files, and automake subdir-objects fails with it in place. (LXC_MONITOR_PROTOCOL_GENERATED, (LXC_MONITOR_GENERATED) (ACCESS_DRIVER_GENERATED, LOCK_PROTOCOL_GENERATED): Likewise. (*_client_bodies.h): Hard-code rules to write into srcdir, as VPATH tries to build $@ locally if missing. (util/virkeymaps.h): Likewise. (lxc/lxc_monitor_dispatch.h): Likewise. (access/viraccessapi*): Likewise. (locking/lock_daemon_dispatch_stubs.h): Likewise. * daemon/Makeflie.am (DAEMON_GENERATED, remote_dispatch.h): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com> fixup DAEMON_GENERATED
2013-09-06 22:54:39 +00:00
--mode=server qemu QEMU $(QEMU_PROTOCOL) \
> $(srcdir)/qemu_dispatch.h
if WITH_LIBVIRTD
# Build a convenience library, for reuse in tests/libvirtdconftest
noinst_LTLIBRARIES = libvirtd_conf.la
libvirtd_conf_la_SOURCES = $(LIBVIRTD_CONF_SOURCES)
libvirtd_conf_la_CFLAGS = \
$(LIBXML_CFLAGS) \
$(XDR_CFLAGS) \
$(WARN_CFLAGS) $(PIE_CFLAGS) \
$(COVERAGE_CFLAGS) \
$(NULL)
libvirtd_conf_la_LDFLAGS = \
$(RELRO_LDFLAGS) \
$(PIE_LDFLAGS) \
$(COVERAGE_LDFLAGS) \
$(NO_INDIRECT_LDFLAGS) \
$(NULL)
libvirtd_conf_la_LIBADD = $(LIBXML_LIBS)
man8_MANS = libvirtd.8
sbin_PROGRAMS = libvirtd
confdir = $(sysconfdir)/libvirt/
conf_DATA = libvirtd.conf
augeasdir = $(datadir)/augeas/lenses
augeas_DATA = libvirtd.aug
augeastestsdir = $(datadir)/augeas/lenses/tests
augeastests_DATA = test_libvirtd.aug
CLEANFILES += test_libvirtd.aug
libvirtd.8: $(srcdir)/libvirtd.8.in
$(AM_V_GEN)sed \
-e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
libvirtd_SOURCES = $(DAEMON_SOURCES)
2007-02-14 01:40:09 +00:00
#-D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED=1 -D_POSIX_C_SOURCE=199506L
2007-06-26 23:04:49 +00:00
libvirtd_CFLAGS = \
$(LIBXML_CFLAGS) $(GNUTLS_CFLAGS) $(SASL_CFLAGS) \
$(XDR_CFLAGS) $(POLKIT_CFLAGS) $(DBUS_CFLAGS) $(LIBNL_CFLAGS) \
$(WARN_CFLAGS) $(PIE_CFLAGS) \
$(COVERAGE_CFLAGS) \
-DQEMUD_PID_FILE="\"$(QEMUD_PID_FILE)\""
libvirtd_LDFLAGS = \
$(RELRO_LDFLAGS) \
$(PIE_LDFLAGS) \
$(COVERAGE_LDFLAGS) \
$(NO_INDIRECT_LDFLAGS) \
$(NULL)
libvirtd_LDADD = \
2008-12-08 12:04:27 +00:00
$(LIBXML_LIBS) \
$(GNUTLS_LIBS) \
$(SASL_LIBS) \
$(DBUS_LIBS) \
$(POLKIT_LIBS) \
$(LIBNL_LIBS)
if WITH_DTRACE_PROBES
libvirtd_LDADD += ../src/libvirt_probes.lo
endif WITH_DTRACE_PROBES
Rewrite all the DTrace/SystemTAP probing The libvirtd daemon had a few crude system tap probes. Some of these were broken during the RPC rewrite. The new modular RPC code is structured in a way that allows much more effective tracing. Instead of trying to hook up the original probes, define a new set of probes for the RPC and event code. The master probes file is now src/probes.d. This contains probes for virNetServerClientPtr, virNetClientPtr, virSocketPtr virNetTLSContextPtr and virNetTLSSessionPtr modules. Also add probes for the poll event loop. The src/dtrace2systemtap.pl script can convert the probes.d file into a libvirt_probes.stp file to make use from systemtap much simpler. The src/rpc/gensystemtap.pl script can generate a set of systemtap functions for translating RPC enum values into printable strings. This works for all RPC header enums (program, type, status, procedure) and also the authentication enum The PROBE macro will automatically generate a VIR_DEBUG statement, so any place with a PROBE can remove any existing manual DEBUG statements. * daemon/libvirtd.stp, daemon/probes.d: Remove obsolete probing * daemon/libvirtd.h: Remove probe macros * daemon/Makefile.am: Remove all probe buildings/install * daemon/remote.c: Update authentication probes * src/dtrace2systemtap.pl, src/rpc/gensystemtap.pl: Scripts to generate STP files * src/internal.h: Add probe macros * src/probes.d: Master list of probes * src/rpc/virnetclient.c, src/rpc/virnetserverclient.c, src/rpc/virnetsocket.c, src/rpc/virnettlscontext.c, src/util/event_poll.c: Insert probe points, removing any DEBUG statements that duplicate the info
2011-09-30 13:40:23 +00:00
libvirtd_LDADD += \
libvirtd_conf.la \
../src/libvirt-lxc.la \
../src/libvirt-qemu.la \
../src/libvirt_driver_remote.la \
$(NULL)
if ! WITH_DRIVER_MODULES
if WITH_QEMU
libvirtd_LDADD += ../src/libvirt_driver_qemu.la
if WITH_DTRACE_PROBES
libvirtd_LDADD += ../src/libvirt_qemu_probes.lo
endif WITH_DTRACE_PROBES
endif WITH_QEMU
if WITH_LXC
libvirtd_LDADD += ../src/libvirt_driver_lxc.la
endif WITH_LXC
if WITH_XEN
libvirtd_LDADD += ../src/libvirt_driver_xen.la
endif WITH_XEN
if WITH_LIBXL
libvirtd_LDADD += ../src/libvirt_driver_libxl.la
endif WITH_LIBXL
if WITH_UML
libvirtd_LDADD += ../src/libvirt_driver_uml.la
endif WITH_UML
2008-11-19 16:58:23 +00:00
if WITH_VBOX
libvirtd_LDADD += ../src/libvirt_driver_vbox.la
endif WITH_VBOX
if WITH_STORAGE
libvirtd_LDADD += ../src/libvirt_driver_storage.la
endif WITH_STORAGE
if WITH_NETWORK
libvirtd_LDADD += ../src/libvirt_driver_network.la
endif WITH_NETWORK
if WITH_INTERFACE
libvirtd_LDADD += ../src/libvirt_driver_interface.la
endif WITH_INTERFACE
if WITH_NODE_DEVICES
libvirtd_LDADD += ../src/libvirt_driver_nodedev.la
endif WITH_NODE_DEVICES
if WITH_SECRETS
libvirtd_LDADD += ../src/libvirt_driver_secret.la
endif WITH_SECRETS
if WITH_NWFILTER
libvirtd_LDADD += ../src/libvirt_driver_nwfilter.la
endif WITH_NWFILTER
endif ! WITH_DRIVER_MODULES
libvirtd_LDADD += ../src/libvirt.la
2007-02-14 01:40:09 +00:00
2013-01-08 22:19:00 +00:00
if WITH_POLKIT
if WITH_POLKIT0
2007-12-05 18:21:27 +00:00
policydir = $(datadir)/PolicyKit/policy
policyauth = auth_admin_keep_session
else ! WITH_POLKIT0
policydir = $(datadir)/polkit-1/actions
policyauth = auth_admin_keep
endif ! WITH_POLKIT0
endif WITH_POLKIT
2007-12-05 18:21:27 +00:00
libvirtd.policy: libvirtd.policy.in $(top_builddir)/config.status
$(AM_V_GEN) sed \
-e 's|[@]authaction[@]|$(policyauth)|g' \
< $< > $@-t && \
mv $@-t $@
BUILT_SOURCES += libvirtd.policy
install-data-local: install-init-redhat install-init-systemd \
install-init-upstart \
install-data-sasl install-data-polkit \
install-logrotate install-sysctl
$(MKDIR_P) $(DESTDIR)$(localstatedir)/log/libvirt \
$(DESTDIR)$(localstatedir)/run/libvirt \
$(DESTDIR)$(localstatedir)/lib/libvirt
uninstall-local:: uninstall-init-redhat uninstall-init-systemd \
uninstall-init-upstart \
uninstall-data-sasl uninstall-data-polkit \
uninstall-logrotate uninstall-sysctl
rmdir $(DESTDIR)$(localstatedir)/log/libvirt || :
rmdir $(DESTDIR)$(localstatedir)/run/libvirt || :
2007-03-13 22:43:22 +00:00
rmdir $(DESTDIR)$(localstatedir)/lib/libvirt || :
2013-01-08 22:19:00 +00:00
if WITH_POLKIT
install-data-polkit::
$(MKDIR_P) $(DESTDIR)$(policydir)
$(INSTALL_DATA) libvirtd.policy $(DESTDIR)$(policydir)/org.libvirt.unix.policy
uninstall-data-polkit::
rm -f $(DESTDIR)$(policydir)/org.libvirt.unix.policy
rmdir $(DESTDIR)$(policydir) || :
else ! WITH_POLKIT
install-data-polkit::
uninstall-data-polkit::
endif ! WITH_POLKIT
remote.c: $(DAEMON_GENERATED)
remote.h: $(DAEMON_GENERATED)
LOGROTATE_CONFS = libvirtd.qemu.logrotate libvirtd.lxc.logrotate \
libvirtd.uml.logrotate libvirtd.logrotate
BUILT_SOURCES += $(LOGROTATE_CONFS)
libvirtd.logrotate: libvirtd.logrotate.in
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
libvirtd.qemu.logrotate: libvirtd.qemu.logrotate.in
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
libvirtd.lxc.logrotate: libvirtd.lxc.logrotate.in
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
libvirtd.uml.logrotate: libvirtd.uml.logrotate.in
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
2008-12-09 20:22:39 +00:00
install-logrotate: $(LOGROTATE_CONFS)
$(MKDIR_P) $(DESTDIR)$(localstatedir)/log/libvirt/qemu/ \
$(DESTDIR)$(localstatedir)/log/libvirt/lxc/ \
$(DESTDIR)$(localstatedir)/log/libvirt/uml/ \
$(DESTDIR)$(sysconfdir)/logrotate.d/
$(INSTALL_DATA) libvirtd.logrotate \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd
$(INSTALL_DATA) libvirtd.qemu.logrotate \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.qemu
$(INSTALL_DATA) libvirtd.lxc.logrotate \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.lxc
$(INSTALL_DATA) libvirtd.uml.logrotate \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.uml
2008-12-09 20:22:39 +00:00
uninstall-logrotate:
rm -f $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.qemu \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.lxc \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.uml
rmdir $(DESTDIR)$(localstatedir)/log/libvirt/qemu || :
rmdir $(DESTDIR)$(localstatedir)/log/libvirt/lxc || :
rmdir $(DESTDIR)$(localstatedir)/log/libvirt/uml || :
rmdir $(DESTDIR)$(sysconfdir)/logrotate.d || :
install-sysconfig:
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sysconfig
$(INSTALL_DATA) $(srcdir)/libvirtd.sysconf \
$(DESTDIR)$(sysconfdir)/sysconfig/libvirtd
uninstall-sysconfig:
rm -f $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd
rmdir $(DESTDIR)$(sysconfdir)/sysconfig || :
if WITH_SYSCTL
# Use $(prefix)/lib rather than $(libdir), since man sysctl.d insists on
# /usr/lib/sysctl.d/ even when libdir is /usr/lib64
install-sysctl:
$(MKDIR_P) $(DESTDIR)$(prefix)/lib/sysctl.d
$(INSTALL_DATA) $(srcdir)/libvirtd.sysctl \
$(DESTDIR)$(prefix)/lib/sysctl.d/libvirtd.conf
uninstall-sysctl:
rm -f $(DESTDIR)$(prefix)/lib/sysctl.d/libvirtd.conf
rmdir $(DESTDIR)$(prefix)/lib/sysctl.d || :
else ! WITH_SYSCTL
install-sysctl:
uninstall-sysctl:
endif ! WITH_SYSCTL
if LIBVIRT_INIT_SCRIPT_RED_HAT
2007-06-26 23:03:48 +00:00
BUILT_SOURCES += libvirtd.init
install-init-redhat: install-sysconfig libvirtd.init
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/rc.d/init.d
$(INSTALL_SCRIPT) libvirtd.init \
$(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd
uninstall-init-redhat: uninstall-sysconfig
rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd
rmdir $(DESTDIR)$(sysconfdir)/rc.d/init.d || :
else ! LIBVIRT_INIT_SCRIPT_RED_HAT
install-init-redhat:
uninstall-init-redhat:
endif ! LIBVIRT_INIT_SCRIPT_RED_HAT
if LIBVIRT_INIT_SCRIPT_UPSTART
install-init-upstart: install-sysconfig
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/event.d
$(INSTALL_SCRIPT) libvirtd.upstart \
$(DESTDIR)$(sysconfdir)/event.d/libvirtd
uninstall-init-upstart: uninstall-sysconfig
rm -f $(DESTDIR)$(sysconfdir)/event.d/libvirtd
rmdir $(DESTDIR)$(sysconfdir)/event.d || :
else ! LIBVIRT_INIT_SCRIPT_UPSTART
install-init-upstart:
uninstall-init-upstart:
endif ! LIBVIRT_INIT_SCRIPT_UPSTART
if LIBVIRT_INIT_SCRIPT_SYSTEMD
build: add $(prefix) to SYSTEMD_UNIT_DIR I noticed this problem when adding systemd support to netcf, because I setup the configure.ac to automatically prefer using systemd over initscripts when possible - although I had copied the install-data-local target from the example of libvirt's "libvirt-guests" service more or less verbatim, "make distcheck" would fail because it was trying to install the service file directly into /lib/systemd/system rather than into /home/user/some/unimportant/name/lib/systemd/system. This is caused by the install/uninstall rules for the systemd unit files relying on $(DESTDIR) pointing the installed files to the right place, but in reality $(DESTDIR) is empty during this part of make distcheck - it instead sets $(prefix) with the toplevel directory used for its test build/install/uninstall cycle. (This problem hasn't been seen when running "make distcheck" in libvirt because libvirt will never build/install systemd support unless explicitly told to do so on the configure commandline, and "make distcheck" doesn't put the "--with-initscript=..." option on the configure commandline.) I verified that the same problem does exist in libvirt by modifying libvirt's configure.ac to set: init_systemd=yes with_init_script=systemd+redhat This forces a build/install of the systemd unit files during distcheck, which yields an error like this: /usr/bin/install -c -m 644 virtlockd.service \ /lib/systemd/system/ libtool: install: warning: relinking `libvirt-qemu.la' /usr/bin/install: cannot remove '/lib/systemd/system/virtlockd.service': Permission denied make[4]: *** [install-systemd] Error 1 After adding $(prefix) to all the definitions of SYSTEMD_UNIT_DIR, make distcheck now completes successfully with the modified configure.ac, and the above lines change to something like this: /usr/bin/install -c -m 644 virtlockd.service \ /home/laine/devel/libvirt/libvirt-1.2.1/_inst/lib/systemd/system/
2014-01-17 12:11:58 +00:00
SYSTEMD_UNIT_DIR = $(prefix)/lib/systemd/system
BUILT_SOURCES += libvirtd.service
install-init-systemd: install-sysconfig libvirtd.service
$(MKDIR_P) $(DESTDIR)$(SYSTEMD_UNIT_DIR)
$(INSTALL_DATA) libvirtd.service \
$(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirtd.service
uninstall-init-systemd: uninstall-sysconfig
rm -f $(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirtd.service
rmdir $(DESTDIR)$(SYSTEMD_UNIT_DIR) || :
else ! LIBVIRT_INIT_SCRIPT_SYSTEMD
install-init-systemd:
uninstall-init-systemd:
endif ! LIBVIRT_INIT_SCRIPT_SYSTEMD
libvirtd.init: libvirtd.init.in $(top_builddir)/config.status
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
-e 's|[@]sbindir[@]|$(sbindir)|g' \
-e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
< $< > $@-t && \
chmod a+x $@-t && \
mv $@-t $@
2007-06-26 23:03:48 +00:00
libvirtd.service: libvirtd.service.in $(top_builddir)/config.status
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
-e 's|[@]sbindir[@]|$(sbindir)|g' \
-e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
< $< > $@-t && \
mv $@-t $@
check-local: check-augeas
AUG_GENTEST = $(PERL) $(top_srcdir)/build-aux/augeas-gentest.pl
test_libvirtd.aug: test_libvirtd.aug.in $(srcdir)/libvirtd.conf
$(AM_V_GEN)$(AUG_GENTEST) $(srcdir)/libvirtd.conf $< $@
check-augeas: test_libvirtd.aug
$(AM_V_GEN)if test -x '$(AUGPARSE)'; then \
'$(AUGPARSE)' -I $(srcdir) test_libvirtd.aug; \
fi
# This must be added last, since functions it provides/replaces
# are used by nearly every other library.
2009-01-08 20:42:01 +00:00
libvirtd_LDADD += ../gnulib/lib/libgnu.la $(LIBSOCKET)
else ! WITH_LIBVIRTD
install-data-local: install-data-sasl
uninstall-local:: uninstall-data-sasl
endif ! WITH_LIBVIRTD
POD2MAN = pod2man -c "Virtualization Support" \
-r "$(PACKAGE)-$(VERSION)" -s 8
$(srcdir)/libvirtd.8.in: libvirtd.pod.in $(top_srcdir)/configure.ac
$(AM_V_GEN)$(POD2MAN) --name LIBVIRTD $< $@ \
&& if grep 'POD ERROR' $@ ; then rm $@; exit 1; fi
# This is needed for clients too, so can't wrap in
# the WITH_LIBVIRTD conditional
if WITH_SASL
install-data-sasl:
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sasl2/
$(INSTALL_DATA) $(srcdir)/libvirtd.sasl \
$(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
uninstall-data-sasl:
rm -f $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
rmdir $(DESTDIR)$(sysconfdir)/sasl2/ || :
else ! WITH_SASL
install-data-sasl:
uninstall-data-sasl:
endif ! WITH_SASL
CLEANFILES += $(BUILT_SOURCES) $(man8_MANS)
CLEANFILES += *.cov *.gcov .libs/*.gcda .libs/*.gcno *.gcno *.gcda
MAINTAINERCLEANFILES = $(srcdir)/libvirtd.8.in $(DAEMON_GENERATED)