External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-08-04 07:53:50 +00:00
Code Issues Packages Projects Releases Wiki Activity
a1d92b93c5
libvirt/tests/qemuxml2argvdata/net-hostdev.xml

43 lines
1.4 KiB
XML
Raw Normal View History

conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<domain type='qemu'>
<name>QEMUGuest1</name>
<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
xml: output memory unit for clarity Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-02-23 00:48:38 +00:00
<memory unit='KiB'>219136</memory>
<currentMemory unit='KiB'>219136</currentMemory>
numad: Always output 'placement' of <vcpu> <vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs).
2012-05-08 16:04:36 +00:00
<vcpu placement='static'>1</vcpu>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<os>
qemuxml2argvdata: Replace 'qemu-system-i386' by 'qemu-system-x86_64' in most test files Replace the emulator and architecture to x86_64, for all non-cpu related test cases. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-08-10 14:00:50 +00:00
<type arch='x86_64' machine='pc'>hvm</type>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<boot dev='hd'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
qemuxml2argvdata: Replace 'qemu-system-i386' by 'qemu-system-x86_64' in most test files Replace the emulator and architecture to x86_64, for all non-cpu related test cases. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-08-10 14:00:50 +00:00
<emulator>/usr/bin/qemu-system-x86_64</emulator>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<disk type='block' device='disk'>
<source dev='/dev/HostVG/QEMUGuest1'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<controller type='usb' index='0'/>
<controller type='ide' index='0'/>
qemu: auto-add pci-root controller for pc machine types <controller type='pci' index='0' model='pci-root'/> is auto-added to pc* machine types. Without this controller PCI bus 0 is not available and no PCI addresses are assigned by default. Since older libvirt supported PCI bus 0 even without this controller, it is removed from the XML when migrating.
2013-04-22 12:16:13 +00:00
<controller type='pci' index='0' model='pci-root'/>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<interface type='hostdev' managed='yes'>
<mac address='00:11:22:33:44:55'/>
<source>
qemu: specify domain in host-side PCI addresses when needed/supported This uses the new QEMU_CAPS_HOST_PCI_MULTIDOMAIN capability when present, for -devivce pci-assign, -device vfio-pci, and -pcidevice. While creating tests for this new functionality, I noticed that the xmls for two existing tests had erroneously specified an until-now-ignored domain="0x0002", so I corrected those two tests, and also added two failure tests to be sure that we alert users who attempt to use a non-zero domain with a qemu that doesn't support it.
2014-04-30 11:32:19 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x07' function='0x1'/>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
</source>
conf: add <vlan> element to network and domain interface elements The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
2012-08-12 07:51:30 +00:00
<vlan>
<tag id='42'/>
</vlan>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<virtualport type='802.1Qbg'>
<parameters managerid='11' typeid='1193047' typeidversion='2' instanceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/>
</virtualport>
qemu: Record the default NIC model in the domain XML This patch implements the devices post parse callback and uses it to fill the default qemu network card model into the XML if none is specified. Libvirt assumes that the network card model for qemu is the "rtl8139". Record this in the XML using the new callback to avoid user confusion.
2013-02-19 16:33:52 +00:00
<model type='rtl8139'/>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
</interface>
device: cleanup input device code The current code was a little bit odd. At first we've removed all possible implicit input devices from domain definition to add them later back if there was any graphics device defined while parsing XML description. That's not all, while formating domain definition to XML description we at first ignore any input devices with bus different to USB and VIRTIO and few lines later we add implicit input devices to XML. This seems to me as a lot of code for nothing. This patch may look to be more complicated than original approach, but this is a preferred way to modify/add driver specific stuff only in those drivers and not deal with them in common parsing/formating functions. The update is to add those implicit input devices into config XML to follow the real HW configuration visible by guest OS. There was also inconsistence between our behavior and QEMU's in the way, that in QEMU there is no way how to disable those implicit input devices for x86 architecture and they are available always, even without graphics device. This applies also to XEN hypervisor. VZ driver already does its part by putting correct implicit devices into live XML. Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-11 11:40:32 +00:00
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<memballoon model='virtio'/>
</devices>
</domain>
Reference in New Issue Copy Permalink