libvirt/tests/qemuxml2argvdata/net-virtio-network-portgroup.xml

57 lines
2.1 KiB
XML
Raw Normal View History

<domain type='qemu'>
<name>QEMUGuest1</name>
<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
xml: output memory unit for clarity Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-02-23 00:48:38 +00:00
<memory unit='KiB'>219136</memory>
<currentMemory unit='KiB'>219136</currentMemory>
<vcpu placement='static'>1</vcpu>
<os>
<type arch='x86_64' machine='pc'>hvm</type>
<boot dev='hd'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<disk type='block' device='disk'>
<source dev='/dev/HostVG/QEMUGuest1'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<controller type='usb' index='0'/>
<controller type='ide' index='0'/>
<controller type='pci' index='0' model='pci-root'/>
<interface type='network' trustGuestRxFilters='yes'>
<mac address='00:11:22:33:44:55'/>
<source network='rednet' portgroup='bob' portid='873be5a0-6b8a-4a0b-a1df-ef3659cd64bc'/>
conf: add <vlan> element to network and domain interface elements The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
2012-08-12 07:51:30 +00:00
<vlan>
<tag id='4095'/>
</vlan>
<virtualport type='802.1Qbg'>
<parameters managerid='11' typeid='1193047' typeidversion='2' instanceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/>
</virtualport>
<model type='virtio'/>
</interface>
<interface type='network' trustGuestRxFilters='no'>
conf: support partially-specified <virtualport> in parser and formatter Until now, all attributes in a <virtualport> parameter list that were acceptable for a particular type, were also required. There were no optional attributes. One of the aims of supporting <virtualport> in libvirt's virtual networks and portgroups is to allow specifying the group-wide parameters in the network's virtualport, and merge that with the interface's virtualport, which will have the instance-specific info (i.e. the interfaceid or instanceid). Additionally, the guest's interface XML shouldn't need to know what type of network connection will be used prior to runtime - it could be openvswitch, 802.1Qbh, 802.1Qbg, or none of the above - but should still be able to specify instance-specific info just in case it turns out to be applicable. Finally, up to now, the parser for virtualport has always generated a random instanceid/interfaceid when appropriate, making it impossible to leave it blank (which is what's required for virtualports within a network/portprofile definition). This patch modifies the parser and formatter of the <virtualport> element in the following ways: * because most of the attributes in a virNetDevVPortProfile are fixed size binary data with no reserved values, there is no way to embed a "this value wasn't specified" sentinel into the existing data. To solve this problem, the new *_specified fields in the virNetDevVPortProfile object that were added in a previous patch of this series are now set when the corresponding attribute is present during the parse. * allow parsing/formatting a <virtualport> that has no type set. In this case, all fields are settable, but all are also optional. * add a GENERATE_MISSING_DEFAULTS flag to the parser - if this flag is set and an instanceid/interfaceid is expected but not provided, a random one will be generated. This was previously the default behavior, but is now done only for virtualports inside an <interface> definition, not for those in <network> or <portgroup>. * add a REQUIRE_ALL_ATTRIBUTES flag to the parser - if this flag is set the parser will call the new virNetDevVPortProfileCheckComplete() functions at the end of the parser to check for any missing attributes (based on type), and return failure if anything is missing. This used to be default behavior. Now it is only used for the virtualport defined inside an interface's <actual> element (by the time you've figured out the contents of <actual>, you should have all the necessary data to fill in the entire virtualport) * add a REQUIRE_TYPE flag to the parser - if this flag is set, the parser will return an error if the virtualport has no type attribute. This also was previously the default behavior, but isn't needed in the case of the virtualport for a type='network' interface (i.e. the exact type isn't yet known), or the virtualport of a portgroup (i.e. the portgroup just has modifiers for the network's virtualport, which *does* require a type) - in those cases, the check will be done at domain startup, once the final virtualport is assembled (this is handled in the next patch).
2012-07-31 18:36:51 +00:00
<mac address='10:11:22:33:44:55'/>
<source network='blue' portgroup='sam' portid='b884cc7e-b347-4a17-9e78-4f672a67794e'/>
conf: support partially-specified <virtualport> in parser and formatter Until now, all attributes in a <virtualport> parameter list that were acceptable for a particular type, were also required. There were no optional attributes. One of the aims of supporting <virtualport> in libvirt's virtual networks and portgroups is to allow specifying the group-wide parameters in the network's virtualport, and merge that with the interface's virtualport, which will have the instance-specific info (i.e. the interfaceid or instanceid). Additionally, the guest's interface XML shouldn't need to know what type of network connection will be used prior to runtime - it could be openvswitch, 802.1Qbh, 802.1Qbg, or none of the above - but should still be able to specify instance-specific info just in case it turns out to be applicable. Finally, up to now, the parser for virtualport has always generated a random instanceid/interfaceid when appropriate, making it impossible to leave it blank (which is what's required for virtualports within a network/portprofile definition). This patch modifies the parser and formatter of the <virtualport> element in the following ways: * because most of the attributes in a virNetDevVPortProfile are fixed size binary data with no reserved values, there is no way to embed a "this value wasn't specified" sentinel into the existing data. To solve this problem, the new *_specified fields in the virNetDevVPortProfile object that were added in a previous patch of this series are now set when the corresponding attribute is present during the parse. * allow parsing/formatting a <virtualport> that has no type set. In this case, all fields are settable, but all are also optional. * add a GENERATE_MISSING_DEFAULTS flag to the parser - if this flag is set and an instanceid/interfaceid is expected but not provided, a random one will be generated. This was previously the default behavior, but is now done only for virtualports inside an <interface> definition, not for those in <network> or <portgroup>. * add a REQUIRE_ALL_ATTRIBUTES flag to the parser - if this flag is set the parser will call the new virNetDevVPortProfileCheckComplete() functions at the end of the parser to check for any missing attributes (based on type), and return failure if anything is missing. This used to be default behavior. Now it is only used for the virtualport defined inside an interface's <actual> element (by the time you've figured out the contents of <actual>, you should have all the necessary data to fill in the entire virtualport) * add a REQUIRE_TYPE flag to the parser - if this flag is set, the parser will return an error if the virtualport has no type attribute. This also was previously the default behavior, but isn't needed in the case of the virtualport for a type='network' interface (i.e. the exact type isn't yet known), or the virtualport of a portgroup (i.e. the portgroup just has modifiers for the network's virtualport, which *does* require a type) - in those cases, the check will be done at domain startup, once the final virtualport is assembled (this is handled in the next patch).
2012-07-31 18:36:51 +00:00
<virtualport>
<parameters instanceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f' interfaceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/>
</virtualport>
<model type='rtl8139'/>
conf: support partially-specified <virtualport> in parser and formatter Until now, all attributes in a <virtualport> parameter list that were acceptable for a particular type, were also required. There were no optional attributes. One of the aims of supporting <virtualport> in libvirt's virtual networks and portgroups is to allow specifying the group-wide parameters in the network's virtualport, and merge that with the interface's virtualport, which will have the instance-specific info (i.e. the interfaceid or instanceid). Additionally, the guest's interface XML shouldn't need to know what type of network connection will be used prior to runtime - it could be openvswitch, 802.1Qbh, 802.1Qbg, or none of the above - but should still be able to specify instance-specific info just in case it turns out to be applicable. Finally, up to now, the parser for virtualport has always generated a random instanceid/interfaceid when appropriate, making it impossible to leave it blank (which is what's required for virtualports within a network/portprofile definition). This patch modifies the parser and formatter of the <virtualport> element in the following ways: * because most of the attributes in a virNetDevVPortProfile are fixed size binary data with no reserved values, there is no way to embed a "this value wasn't specified" sentinel into the existing data. To solve this problem, the new *_specified fields in the virNetDevVPortProfile object that were added in a previous patch of this series are now set when the corresponding attribute is present during the parse. * allow parsing/formatting a <virtualport> that has no type set. In this case, all fields are settable, but all are also optional. * add a GENERATE_MISSING_DEFAULTS flag to the parser - if this flag is set and an instanceid/interfaceid is expected but not provided, a random one will be generated. This was previously the default behavior, but is now done only for virtualports inside an <interface> definition, not for those in <network> or <portgroup>. * add a REQUIRE_ALL_ATTRIBUTES flag to the parser - if this flag is set the parser will call the new virNetDevVPortProfileCheckComplete() functions at the end of the parser to check for any missing attributes (based on type), and return failure if anything is missing. This used to be default behavior. Now it is only used for the virtualport defined inside an interface's <actual> element (by the time you've figured out the contents of <actual>, you should have all the necessary data to fill in the entire virtualport) * add a REQUIRE_TYPE flag to the parser - if this flag is set, the parser will return an error if the virtualport has no type attribute. This also was previously the default behavior, but isn't needed in the case of the virtualport for a type='network' interface (i.e. the exact type isn't yet known), or the virtualport of a portgroup (i.e. the portgroup just has modifiers for the network's virtualport, which *does* require a type) - in those cases, the check will be done at domain startup, once the final virtualport is assembled (this is handled in the next patch).
2012-07-31 18:36:51 +00:00
</interface>
<interface type='network'>
<mac address='22:11:22:33:44:55'/>
<source network='blue' portgroup='sam' portid='c5fc8eb4-cb69-4fea-8f8b-65e00e6d1dba'/>
conf: support partially-specified <virtualport> in parser and formatter Until now, all attributes in a <virtualport> parameter list that were acceptable for a particular type, were also required. There were no optional attributes. One of the aims of supporting <virtualport> in libvirt's virtual networks and portgroups is to allow specifying the group-wide parameters in the network's virtualport, and merge that with the interface's virtualport, which will have the instance-specific info (i.e. the interfaceid or instanceid). Additionally, the guest's interface XML shouldn't need to know what type of network connection will be used prior to runtime - it could be openvswitch, 802.1Qbh, 802.1Qbg, or none of the above - but should still be able to specify instance-specific info just in case it turns out to be applicable. Finally, up to now, the parser for virtualport has always generated a random instanceid/interfaceid when appropriate, making it impossible to leave it blank (which is what's required for virtualports within a network/portprofile definition). This patch modifies the parser and formatter of the <virtualport> element in the following ways: * because most of the attributes in a virNetDevVPortProfile are fixed size binary data with no reserved values, there is no way to embed a "this value wasn't specified" sentinel into the existing data. To solve this problem, the new *_specified fields in the virNetDevVPortProfile object that were added in a previous patch of this series are now set when the corresponding attribute is present during the parse. * allow parsing/formatting a <virtualport> that has no type set. In this case, all fields are settable, but all are also optional. * add a GENERATE_MISSING_DEFAULTS flag to the parser - if this flag is set and an instanceid/interfaceid is expected but not provided, a random one will be generated. This was previously the default behavior, but is now done only for virtualports inside an <interface> definition, not for those in <network> or <portgroup>. * add a REQUIRE_ALL_ATTRIBUTES flag to the parser - if this flag is set the parser will call the new virNetDevVPortProfileCheckComplete() functions at the end of the parser to check for any missing attributes (based on type), and return failure if anything is missing. This used to be default behavior. Now it is only used for the virtualport defined inside an interface's <actual> element (by the time you've figured out the contents of <actual>, you should have all the necessary data to fill in the entire virtualport) * add a REQUIRE_TYPE flag to the parser - if this flag is set, the parser will return an error if the virtualport has no type attribute. This also was previously the default behavior, but isn't needed in the case of the virtualport for a type='network' interface (i.e. the exact type isn't yet known), or the virtualport of a portgroup (i.e. the portgroup just has modifiers for the network's virtualport, which *does* require a type) - in those cases, the check will be done at domain startup, once the final virtualport is assembled (this is handled in the next patch).
2012-07-31 18:36:51 +00:00
<virtualport type='802.1Qbh'>
<parameters profileid='testhis99'/>
</virtualport>
<model type='rtl8139'/>
conf: support partially-specified <virtualport> in parser and formatter Until now, all attributes in a <virtualport> parameter list that were acceptable for a particular type, were also required. There were no optional attributes. One of the aims of supporting <virtualport> in libvirt's virtual networks and portgroups is to allow specifying the group-wide parameters in the network's virtualport, and merge that with the interface's virtualport, which will have the instance-specific info (i.e. the interfaceid or instanceid). Additionally, the guest's interface XML shouldn't need to know what type of network connection will be used prior to runtime - it could be openvswitch, 802.1Qbh, 802.1Qbg, or none of the above - but should still be able to specify instance-specific info just in case it turns out to be applicable. Finally, up to now, the parser for virtualport has always generated a random instanceid/interfaceid when appropriate, making it impossible to leave it blank (which is what's required for virtualports within a network/portprofile definition). This patch modifies the parser and formatter of the <virtualport> element in the following ways: * because most of the attributes in a virNetDevVPortProfile are fixed size binary data with no reserved values, there is no way to embed a "this value wasn't specified" sentinel into the existing data. To solve this problem, the new *_specified fields in the virNetDevVPortProfile object that were added in a previous patch of this series are now set when the corresponding attribute is present during the parse. * allow parsing/formatting a <virtualport> that has no type set. In this case, all fields are settable, but all are also optional. * add a GENERATE_MISSING_DEFAULTS flag to the parser - if this flag is set and an instanceid/interfaceid is expected but not provided, a random one will be generated. This was previously the default behavior, but is now done only for virtualports inside an <interface> definition, not for those in <network> or <portgroup>. * add a REQUIRE_ALL_ATTRIBUTES flag to the parser - if this flag is set the parser will call the new virNetDevVPortProfileCheckComplete() functions at the end of the parser to check for any missing attributes (based on type), and return failure if anything is missing. This used to be default behavior. Now it is only used for the virtualport defined inside an interface's <actual> element (by the time you've figured out the contents of <actual>, you should have all the necessary data to fill in the entire virtualport) * add a REQUIRE_TYPE flag to the parser - if this flag is set, the parser will return an error if the virtualport has no type attribute. This also was previously the default behavior, but isn't needed in the case of the virtualport for a type='network' interface (i.e. the exact type isn't yet known), or the virtualport of a portgroup (i.e. the portgroup just has modifiers for the network's virtualport, which *does* require a type) - in those cases, the check will be done at domain startup, once the final virtualport is assembled (this is handled in the next patch).
2012-07-31 18:36:51 +00:00
</interface>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
<memballoon model='virtio'/>
</devices>
</domain>