External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-08-04 07:53:50 +00:00
Code Issues Packages Projects Releases Wiki Activity
a1d92b93c5
libvirt/tests/qemuxml2xmloutdata/pci-bridge-many-disks.x86_64-latest.xml

682 lines
29 KiB
XML
Raw Normal View History

qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
<domain type='qemu'>
<name>lots-of-disks</name>
<uuid>04872dc1-e1de-434b-ab21-e3e80e416349</uuid>
<memory unit='KiB'>4000768</memory>
<currentMemory unit='KiB'>4000000</currentMemory>
<vcpu placement='static'>1</vcpu>
<os>
tests: qemuxml2argvdata: Purge versioned i440fx machine types from fake-caps tests Use the 'pc' alias for them as it's equivalent. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-01-05 10:52:04 +00:00
<type arch='x86_64' machine='pc'>hvm</type>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
<pae/>
</features>
qemuxml2xmltest: Modernize all remaining fake capability tests Convert all cases using DO_TEST() to use DO_TEST_CAPS_LATEST() and remove DO_TEST() to prevent further use. Most of the changes are related to CPU being present in the output XML. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-08-15 13:45:51 +00:00
<cpu mode='custom' match='exact' check='none'>
<model fallback='forbid'>qemu64</model>
</cpu>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
<clock offset='utc'>
<timer name='kvmclock' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
<emulator>/usr/bin/qemu-system-x86_64</emulator>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/test.img'/>
<target dev='vda' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-a-a.img'/>
disk: Disallow duplicated target 'dev' values https://bugzilla.redhat.com/show_bug.cgi?id=1142631 This patch resolves a situation where the same "<target dev='$name'...>" can be used for multiple disks in the domain. While the $name is "mostly" advisory regarding the expected order that the disk is added to the domain and not guaranteed to map to the device name in the guest OS, it still should be unique enough such that other domblk* type operations can be performed. Without the patch, the domblklist will list the same Target twice: $ virsh domblklist $dom Target Source ------------------------------------------------ sda /var/lib/libvirt/images/file.qcow2 sda /var/lib/libvirt/images/file.img Additionally, getting domblkstat, domblkerror, domblkinfo, and other block* type calls will not be able to reference the second target. Fortunately, hotplug disallows adding a "third" sda value: $ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M $ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda error: Failed to attach disk error: operation failed: target sda already exists $ BUT, it since 'sdb' doesn't exist one would get the following on the same hotplug attempt, but changing to use 'sdb' instead of 'sda' $ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb error: Failed to attach disk error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device $ Since we cannot fix this issue at parsing time, the best that can be done so as to not "lose" a domain is to make the check prior to starting the guest with the results as follows: $ virsh start $dom error: Failed to start domain $dom error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img' $ Running 'make check' found a few more instances in the tests where this duplicated target dev value was being used. These also exhibited some duplicated 'id=' values (negating the uniqueness argument of aliases) in the corresponding .args file and of course the *xmlout version of a few input XML files.
2015-02-26 17:20:01 +00:00
<target dev='vdaa' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-a-b.img'/>
<target dev='vdab' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-a-c.img'/>
<target dev='vdac' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-a-d.img'/>
<target dev='vdad' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-b-a.img'/>
<target dev='vdba' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-b-b.img'/>
<target dev='vdbb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-b-c.img'/>
<target dev='vdbc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x0c' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-b-d.img'/>
<target dev='vdbd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x0d' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-c-a.img'/>
<target dev='vdca' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x0e' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-c-b.img'/>
<target dev='vdcb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x0f' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-c-c.img'/>
<target dev='vdcc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x10' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-c-d.img'/>
<target dev='vdcd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x11' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-d-a.img'/>
<target dev='vdda' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x12' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-d-b.img'/>
<target dev='vddb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x13' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-d-c.img'/>
<target dev='vddc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x14' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-d-d.img'/>
<target dev='vddd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x15' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-e-a.img'/>
<target dev='vdea' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x16' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-e-b.img'/>
<target dev='vdeb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x17' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-e-c.img'/>
<target dev='vdec' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x18' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-e-d.img'/>
<target dev='vded' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x19' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-f-a.img'/>
<target dev='vdfa' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1a' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-f-b.img'/>
<target dev='vdfb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1b' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-f-c.img'/>
<target dev='vdfc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1c' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-f-d.img'/>
<target dev='vdfd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1d' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-g-a.img'/>
<target dev='vdga' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-g-b.img'/>
<target dev='vdgb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-g-c.img'/>
<target dev='vdgc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x01' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-g-d.img'/>
<target dev='vdgd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x02' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-h-a.img'/>
<target dev='vdha' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x03' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-h-b.img'/>
<target dev='vdhb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x04' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-h-c.img'/>
<target dev='vdhc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x05' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-h-d.img'/>
<target dev='vdhd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x06' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-i-a.img'/>
<target dev='vdia' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x07' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-i-b.img'/>
<target dev='vdib' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x08' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-i-c.img'/>
<target dev='vdic' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x09' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-i-d.img'/>
<target dev='vdid' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x0a' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-j-a.img'/>
<target dev='vdja' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x0b' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-j-b.img'/>
<target dev='vdjb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x0c' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-j-c.img'/>
<target dev='vdjc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x0d' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-j-d.img'/>
<target dev='vdjd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x0e' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-k-a.img'/>
<target dev='vdka' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x0f' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-k-b.img'/>
<target dev='vdkb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x10' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-k-c.img'/>
<target dev='vdkc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x11' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-k-d.img'/>
<target dev='vdkd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x12' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-l-a.img'/>
<target dev='vdla' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x13' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-l-b.img'/>
<target dev='vdlb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x14' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-l-c.img'/>
<target dev='vdlc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x15' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-l-d.img'/>
<target dev='vdld' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x16' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-m-a.img'/>
<target dev='vdma' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x17' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-m-b.img'/>
<target dev='vdmb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x18' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-m-c.img'/>
<target dev='vdmc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x19' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-m-d.img'/>
<target dev='vdmd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x1a' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-n-a.img'/>
<target dev='vdna' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x1b' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-n-b.img'/>
<target dev='vdnb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x1c' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-n-c.img'/>
<target dev='vdnc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x1d' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-n-d.img'/>
<target dev='vdnd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x1e' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-o-a.img'/>
<target dev='vdoa' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x1f' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-o-b.img'/>
<target dev='vdob' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-o-c.img'/>
<target dev='vdoc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-o-d.img'/>
<target dev='vdod' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x03' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-p-a.img'/>
<target dev='vdpa' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x04' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-p-b.img'/>
<target dev='vdpb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x05' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-p-c.img'/>
<target dev='vdpc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x06' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-p-d.img'/>
<target dev='vdpd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x07' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-q-a.img'/>
<target dev='vdqa' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x08' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-q-b.img'/>
<target dev='vdqb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x09' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-q-c.img'/>
<target dev='vdqc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x0a' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-q-d.img'/>
<target dev='vdqd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x0b' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-r-a.img'/>
<target dev='vdra' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x0c' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-r-b.img'/>
<target dev='vdrb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x0d' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-r-c.img'/>
<target dev='vdrc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x0e' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-r-d.img'/>
<target dev='vdrd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x0f' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-s-a.img'/>
<target dev='vdsa' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x10' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-s-b.img'/>
<target dev='vdsb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x11' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-s-c.img'/>
<target dev='vdsc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x12' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-s-d.img'/>
<target dev='vdsd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x13' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-t-a.img'/>
<target dev='vdta' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x14' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-t-b.img'/>
<target dev='vdtb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x15' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-t-c.img'/>
<target dev='vdtc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x16' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-t-d.img'/>
<target dev='vdtd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x17' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-u-a.img'/>
<target dev='vdua' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x18' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-u-b.img'/>
<target dev='vdub' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x19' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-u-c.img'/>
<target dev='vduc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x1a' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-u-d.img'/>
<target dev='vdud' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x1b' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-v-a.img'/>
<target dev='vdva' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x1c' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-v-b.img'/>
<target dev='vdvb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x1d' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-v-c.img'/>
<target dev='vdvc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x1e' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-v-d.img'/>
<target dev='vdvd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x1f' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-w-a.img'/>
<target dev='vdwa' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x01' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-w-b.img'/>
<target dev='vdwb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x02' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-w-c.img'/>
<target dev='vdwc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x03' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-w-d.img'/>
<target dev='vdwd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x04' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-x-a.img'/>
<target dev='vdxa' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x05' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-x-b.img'/>
<target dev='vdxb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x06' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-x-c.img'/>
<target dev='vdxc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x07' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-x-d.img'/>
<target dev='vdxd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x08' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-y-a.img'/>
<target dev='vdya' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x09' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-y-b.img'/>
<target dev='vdyb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x0a' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-y-c.img'/>
<target dev='vdyc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x0b' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-y-d.img'/>
<target dev='vdyd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x0c' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-z-a.img'/>
<target dev='vdza' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x0d' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-z-b.img'/>
<target dev='vdzb' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x0e' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-z-c.img'/>
<target dev='vdzc' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x0f' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/disk-z-d.img'/>
<target dev='vdzd' bus='virtio'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x03' slot='0x10' function='0x0'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
</disk>
qemuxml2xmltest: Modernize all remaining fake capability tests Convert all cases using DO_TEST() to use DO_TEST_CAPS_LATEST() and remove DO_TEST() to prevent further use. Most of the changes are related to CPU being present in the output XML. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-08-15 13:45:51 +00:00
<controller type='usb' index='0' model='piix3-uhci'>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
</controller>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
<controller type='pci' index='0' model='pci-root'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<controller type='pci' index='1' model='pci-bridge'>
<model name='pci-bridge'/>
<target chassisNr='1'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
</controller>
<controller type='pci' index='2' model='pci-bridge'>
<model name='pci-bridge'/>
<target chassisNr='2'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
</controller>
<controller type='pci' index='3' model='pci-bridge'>
<model name='pci-bridge'/>
<target chassisNr='3'/>
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
</controller>
device: cleanup input device code The current code was a little bit odd. At first we've removed all possible implicit input devices from domain definition to add them later back if there was any graphics device defined while parsing XML description. That's not all, while formating domain definition to XML description we at first ignore any input devices with bus different to USB and VIRTIO and few lines later we add implicit input devices to XML. This seems to me as a lot of code for nothing. This patch may look to be more complicated than original approach, but this is a preferred way to modify/add driver specific stuff only in those drivers and not deal with them in common parsing/formating functions. The update is to add those implicit input devices into config XML to follow the real HW configuration visible by guest OS. There was also inconsistence between our behavior and QEMU's in the way, that in QEMU there is no way how to disable those implicit input devices for x86 architecture and they are available always, even without graphics device. This applies also to XEN hypervisor. VZ driver already does its part by putting correct implicit devices into live XML. Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-11 11:40:32 +00:00
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
qemu: populate <audio> element with default config Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable - VNC - set to "none", unless passthrough of host env variable is set - SPICE - always set to "spice" - SDL - always passthrough host env - No graphics - set to "none", unless passthrough of host env variable is set The setting of the QEMU_AUDIO_DRV env variable is done in the code which configures graphics. If no <audio> element is present, we now auto-populate <audio> elements to reflect this historical default config. This avoids need to set audio env when processing graphics. Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-24 14:24:10 +00:00
<audio id='1' type='none'/>
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
<memballoon model='none'/>
</devices>
</domain>
Reference in New Issue Copy Permalink