External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-23 14:15:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
a9b1375d7d
libvirt/tests/qemuxml2xmloutdata/autoindex.xml

156 lines
7.1 KiB
XML
Raw Normal View History

conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
<domain type='qemu'>
<name>q35-test</name>
<uuid>11dbdcdd-4c3b-482b-8903-9bdb8c0a2774</uuid>
<memory unit='KiB'>2097152</memory>
<currentMemory unit='KiB'>2097152</currentMemory>
<vcpu placement='static' cpuset='0-1'>2</vcpu>
<os>
<type arch='x86_64' machine='q35'>hvm</type>
<boot dev='hd'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
<emulator>/usr/bin/qemu-system-x86_64</emulator>
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
<disk type='block' device='disk'>
tests: qemuxml2xml: Remove testing with allowed format detection Nobody should use format detection due to security implications. The result of the change is that 'raw' format will be printed unless specified explicitly. Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-03-02 14:43:55 +00:00
<driver name='qemu' type='raw'/>
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
<source dev='/dev/HostVG/QEMUGuest1'/>
<target dev='sda' bus='sata'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<controller type='pci' index='0' model='pcie-root'/>
<controller type='pci' index='1' model='dmi-to-pci-bridge'>
<model name='i82801b11-bridge'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/>
</controller>
<controller type='pci' index='2' model='pci-bridge'>
<model name='pci-bridge'/>
<target chassisNr='2'/>
<address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
</controller>
<controller type='pci' index='3' model='pcie-root-port'>
<model name='ioh3420'/>
<target chassis='3' port='0x10'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</controller>
<controller type='pci' index='4' model='pcie-switch-upstream-port'>
<model name='x3130-upstream'/>
<address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
</controller>
<controller type='pci' index='5' model='pcie-switch-downstream-port'>
<model name='xio3130-downstream'/>
<target chassis='5' port='0x0'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/>
</controller>
<controller type='pci' index='6' model='pcie-switch-downstream-port'>
<model name='xio3130-downstream'/>
<target chassis='6' port='0x1'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x01' function='0x0'/>
</controller>
<controller type='pci' index='7' model='pcie-switch-downstream-port'>
<model name='xio3130-downstream'/>
<target chassis='7' port='0x2'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x02' function='0x0'/>
</controller>
<controller type='pci' index='8' model='pcie-switch-downstream-port'>
<model name='xio3130-downstream'/>
<target chassis='8' port='0x3'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x03' function='0x0'/>
</controller>
<controller type='pci' index='9' model='pcie-switch-downstream-port'>
<model name='xio3130-downstream'/>
<target chassis='9' port='0x4'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x04' function='0x0'/>
</controller>
<controller type='pci' index='10' model='pcie-switch-downstream-port'>
<model name='xio3130-downstream'/>
<target chassis='10' port='0x5'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x05' function='0x0'/>
</controller>
<controller type='pci' index='11' model='pcie-switch-downstream-port'>
<model name='xio3130-downstream'/>
<target chassis='11' port='0x6'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x06' function='0x0'/>
</controller>
<controller type='pci' index='12' model='pcie-switch-downstream-port'>
<model name='xio3130-downstream'/>
<target chassis='12' port='0x7'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x07' function='0x0'/>
</controller>
<controller type='pci' index='13' model='pcie-switch-downstream-port'>
<model name='xio3130-downstream'/>
<target chassis='13' port='0x8'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x08' function='0x0'/>
</controller>
<controller type='pci' index='14' model='pcie-switch-downstream-port'>
<model name='xio3130-downstream'/>
<target chassis='14' port='0x9'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x09' function='0x0'/>
</controller>
<controller type='usb' index='0' model='ich9-ehci1'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1d' function='0x7'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1d' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1d' function='0x1'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1d' function='0x2'/>
</controller>
<controller type='usb' index='1' model='ich9-ehci1'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1a' function='0x7'/>
</controller>
<controller type='usb' index='1' model='ich9-uhci1'>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1a' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='2' model='ich9-uhci1'>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='2' model='ich9-uhci2'>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x1'/>
</controller>
<controller type='usb' index='2' model='ich9-uhci3'>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x2'/>
</controller>
<controller type='usb' index='2' model='ich9-ehci1'>
<address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x7'/>
</controller>
<controller type='usb' index='3' model='nec-xhci'>
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
<address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/>
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
</controller>
<controller type='usb' index='4' model='ich9-uhci1'>
<master startport='0'/>
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x0' multifunction='on'/>
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
</controller>
<controller type='usb' index='4' model='ich9-uhci2'>
<master startport='2'/>
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x1'/>
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
</controller>
<controller type='usb' index='4' model='ich9-uhci3'>
<master startport='4'/>
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x2'/>
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
</controller>
<controller type='usb' index='4' model='ich9-ehci1'>
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x7'/>
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
</controller>
<controller type='sata' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
</controller>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
qemu: populate <audio> element with default config Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable - VNC - set to "none", unless passthrough of host env variable is set - SPICE - always set to "spice" - SDL - always passthrough host env - No graphics - set to "none", unless passthrough of host env variable is set The setting of the QEMU_AUDIO_DRV env variable is done in the code which configures graphics. If no <audio> element is present, we now auto-populate <audio> elements to reflect this historical default config. This avoids need to set audio env when processing graphics. Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-24 14:24:10 +00:00
<audio id='1' type='none'/>
conf: permit auto-assignment of controller indexes Hand-entering indexes for 20 PCI controllers is not as tedious as manually determining and entering their PCI addresses, but it's still annoying, and the algorithm for determining the proper index is incredibly simple (in all cases except one) - just pick the lowest unused index. The one exception is USB2 controllers because multiple controllers in the same group have the same index. For these we look to see if 1) the most recently added USB controller is also a USB2 controller, and 2) the group *that* controller belongs to doesn't yet have a controller of the exact model we're just now adding - if both are true, the new controller gets the same index, but in all other cases we just assign the lowest unused index. With this patch in place and combined with the automatic PCI address assignment, we can define a PCIe switch with several ports like this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-switch-upstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> <controller type='pci' model='pcie-switch-downstream-port'/> ... These will each get a unique index, and PCI addresses that connect them together appropriately with no pesky numbers required.
2016-05-10 17:14:32 +00:00
<memballoon model='none'/>
</devices>
</domain>
Reference in New Issue Copy Permalink