External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-11-05 12:51:12 +00:00
Code Issues Packages Projects Releases Wiki Activity
b50d8f0c1f
libvirt/tests/networkxml2confdata/nat-network-dns-srv-record.conf

26 lines
1.0 KiB
Plaintext
Raw Normal View History

network: put dnsmasq parameters in conf-file instead of command line This patch changes how parameters are passed to dnsmasq. Instead of being on the command line, the parameters are put into a file (one parameter per line) and a commandline --conf-file= specifies the location of the file. The file is located in the same directory as the leases file. Putting the dnsmasq parameters into a configuration file allows them to be examined and more easily understood than examining the command lines displayed by "ps ax". This is especially true when a number of networks have been started. When the use of dnsmasq was originally done, the required command line was simple, but it has gotten more complicated over time and will likely become even more complicated in the future. Note: The test conf files have all been renamed .conf instead of .argv, and tests/networkxml2xmlargvdata was moved to tests/networkxml2xmlconfdata.
2012-12-06 17:20:39 +00:00
##WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE
##OVERWRITTEN AND LOST. Changes to this configuration should be made using:
## virsh net-edit default
network: match xml warning message I noticed that /var/lib/libvirt/dnsmasq/*.conf used the wrong word; it was intended to match the wording in src/util/xml.c. * src/network/bridge_driver.c (networkDnsmasqConfContents): Fix typo. * tests/networkxml2confdata/*.conf: Update accordingly.
2012-12-12 22:03:40 +00:00
## or other application using the libvirt API.
network: put dnsmasq parameters in conf-file instead of command line This patch changes how parameters are passed to dnsmasq. Instead of being on the command line, the parameters are put into a file (one parameter per line) and a commandline --conf-file= specifies the location of the file. The file is located in the same directory as the leases file. Putting the dnsmasq parameters into a configuration file allows them to be examined and more easily understood than examining the command lines displayed by "ps ax". This is especially true when a number of networks have been started. When the use of dnsmasq was originally done, the required command line was simple, but it has gotten more complicated over time and will likely become even more complicated in the future. Note: The test conf files have all been renamed .conf instead of .argv, and tests/networkxml2xmlargvdata was moved to tests/networkxml2xmlconfdata.
2012-12-06 17:20:39 +00:00
##
## dnsmasq conf file created by libvirt
strict-order
network: prevent dnsmasq from listening on localhost This patch resolves the problem reported in: https://bugzilla.redhat.com/show_bug.cgi?id=886663 The source of the problem was the fix for CVE 2011-3411: https://bugzilla.redhat.com/show_bug.cgi?id=833033 which was originally committed upstream in commit 753ff83a50263d6975f88d6605d4b5ddfcc97560. That commit improperly removed the "--except-interface lo" from dnsmasq commandlines when --bind-dynamic was used (based on comments in the latter bug). It turns out that the problem reported in the CVE could be eliminated without removing "--except-interface lo", and removing it actually caused each instance of dnsmasq to listen on localhost on port 53, which created a new problem: If another instance of dnsmasq using "bind-interfaces" (instead of "bind-dynamic") had already been started (or if another instance started later used "bind-dynamic"), this wouldn't have any immediately visible ill effects, but if you tried to start another dnsmasq instance using "bind-interfaces" *after* starting any libvirt networks, the new dnsmasq would fail to start, because there was already another process listening on port 53. (Subsequent to the CVE fix, another patch changed the network driver to put dnsmasq options in a conf file rather than directly on the dnsmasq commandline, but preserved the same options.) This patch changes the network driver to *always* add "except-interface=lo" to dnsmasq conf files, regardless of whether we use bind-dynamic or bind-interfaces. This way no libvirt dnsmasq instances are listening on localhost (and the CVE is still fixed). The actual code change is miniscule, but must be propogated through all of the test files as well.
2012-12-13 06:46:40 +00:00
except-interface=lo
network: put dnsmasq parameters in conf-file instead of command line This patch changes how parameters are passed to dnsmasq. Instead of being on the command line, the parameters are put into a file (one parameter per line) and a commandline --conf-file= specifies the location of the file. The file is located in the same directory as the leases file. Putting the dnsmasq parameters into a configuration file allows them to be examined and more easily understood than examining the command lines displayed by "ps ax". This is especially true when a number of networks have been started. When the use of dnsmasq was originally done, the required command line was simple, but it has gotten more complicated over time and will likely become even more complicated in the future. Note: The test conf files have all been renamed .conf instead of .argv, and tests/networkxml2xmlargvdata was moved to tests/networkxml2xmlconfdata.
2012-12-06 17:20:39 +00:00
bind-dynamic
interface=virbr0
network: fix problems with SRV records A patch submitted by Steven Malin last week pointed out a problem with libvirt's DNS SRV record configuration: https://www.redhat.com/archives/libvir-list/2014-March/msg00536.html When searching for that message later, I found another series that had been posted by Guannan Ren back in 2012 that somehow slipped between the cracks: https://www.redhat.com/archives/libvir-list/2012-July/msg00236.html That patch was very much out of date, but also pointed out some real problems. This patch fixes all the noted problems by refactoring virNetworkDNSSrvDefParseXML() and networkDnsmasqConfContents(), then verifies those fixes by added several new records to the test case. Problems fixed: * both service and protocol now have an underscore ("_") prepended on the commandline, as required by RFC2782. <srv service='sip' protocol='udp' domain='example.com' target='tests.example.com' port='5060' priority='10' weight='150'/> before: srv-host=sip.udp.example.com,tests.example.com,5060,10,150 after: srv-host=_sip._udp.example.com,tests.example.com,5060,10,150 * if "domain" wasn't specified in the <srv> element, the extra trailing "." will no longer be added to the dnsmasq commandline. <srv service='sip' protocol='udp' target='tests.example.com' port='5060' priority='10' weight='150'/> before: srv-host=sip.udp.,tests.example.com,5060,10,150 after: srv-host=_sip._udp,tests.example.com,5060,10,150 * when optional attributes aren't specified, the separating comma is also now not placed on the dnsmasq commandline. If optional attributes in the middle of the line are not specified, they are replaced with a default value in the commandline (1 for port, 0 for priority and weight). <srv service='sip' protocol='udp' target='tests.example.com' port='5060'/> before: srv-host=sip.udp.,tests.example.com,5060,, after: srv-host=_sip._udp,tests.example.com,5060 (actually the would have generated an error, because "optional" attributes weren't really optional.) * The allowed characters for both service and protocol are now limited to alphanumerics, plus a few special characters that are found in existing names in /etc/services and /etc/protocols. (One exception is that both of these files contain names with an embedded ".", but "." can't be used in these fields of an SRV record because it is used as a field separator and there is no method to escape a "." into a field.) (Previously only the strings "tcp" and "udp" were allowed for protocol, but this restriction has been removed, since RFC2782 specifically says that it isn't limited to those, and that anyway it is case insensitive.) * the "domain" attribute is no longer required in order to recognize the port, priority, and weight attributes during parsing. Only "target" is required for this. * if "target" isn't specified, port, priority, and weight are not allowed (since they are meaningless - an empty target means "this service is *not available* for this domain"). * port, priority, and weight are now truly optional, as the comments originally suggested, but which was not actually true.
2014-03-18 01:16:38 +00:00
srv-host=_name._tcp.test-domain-name.com,test.example.com,1111,11,111
srv-host=_name2._udp,test2.example.com,2222,22,222
srv-host=_name3._tcp.test3.com,test3.example.com,3333,33
srv-host=_name4._tcp.test4.com,test4.example.com,4444
srv-host=_name5._udp,test5.example.com,1,55,555
srv-host=_name6._tcp.test6.com,test6.example.com,6666,0,666
srv-host=_name7._tcp.test7.com,test7.example.com,1,0,777
network: add netmask to dhcp range of dnsmasq conf file for IPv4 dnsmasq documentation says that the *IPv4* prefix/network address/broadcast address sent to dhcp clients will be automatically determined by dnsmasq by looking at the interface it's listening on, so the original libvirt code did not add a netmask to the dnsmasq commandline (or later, the dnsmasq conf file). For *IPv6* however, dnsmasq apparently cannot automatically determine the prefix (functionally the same as a netmask), and it must be explicitly provided in the conf file (as a part of the dhcp-range option). So many years after IPv4 DHCP support had been added, when IPv6 dhcp support was added the prefix was included at the end of the dhcp-range setting, but only for IPv6. A user had reported a bug on a host where one of the interfaces was a superset of the libvirt network where dhcp is needed (e.g., the host's ethernet is 10.0.0.20/8, and the libvirt network is 10.10.0.1/24). For some reason dnsmasq was supplying the netmask for the /8 network to clients requesting an address on the /24 interface. This seems like a bug in dnsmasq, but even if/when it gets fixed there, it looks like there is no harm in just always adding the netmask to all IPv4 dhcp-range options similar to how prefix is added to all IPv6 dhcp-range options. Signed-off-by: Laine Stump <laine@laine.org> Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-18 21:34:50 +00:00
dhcp-range=192.168.122.2,192.168.122.254,255.255.255.0
network: put dnsmasq parameters in conf-file instead of command line This patch changes how parameters are passed to dnsmasq. Instead of being on the command line, the parameters are put into a file (one parameter per line) and a commandline --conf-file= specifies the location of the file. The file is located in the same directory as the leases file. Putting the dnsmasq parameters into a configuration file allows them to be examined and more easily understood than examining the command lines displayed by "ps ax". This is especially true when a number of networks have been started. When the use of dnsmasq was originally done, the required command line was simple, but it has gotten more complicated over time and will likely become even more complicated in the future. Note: The test conf files have all been renamed .conf instead of .argv, and tests/networkxml2xmlargvdata was moved to tests/networkxml2xmlconfdata.
2012-12-06 17:20:39 +00:00
dhcp-no-override
network: add dnsmasq option 'dhcp-authoritative' The dnsmasq man page recommends that dhcp-authoritative "should be set when dnsmasq is definitely the only DHCP server on a network". This is the case for libvirt-managed virtual networks. The effect of this is that VMs that fail to renew their DHCP lease in time (e.g. if the VM or host is suspended) will be able to re-acquire the lease even if it's expired, unless the IP address has been taken by some other host. This avoids various annoyances caused by changing VM IP addresses.
2016-09-21 08:49:41 +00:00
dhcp-authoritative
network: put dnsmasq parameters in conf-file instead of command line This patch changes how parameters are passed to dnsmasq. Instead of being on the command line, the parameters are put into a file (one parameter per line) and a commandline --conf-file= specifies the location of the file. The file is located in the same directory as the leases file. Putting the dnsmasq parameters into a configuration file allows them to be examined and more easily understood than examining the command lines displayed by "ps ax". This is especially true when a number of networks have been started. When the use of dnsmasq was originally done, the required command line was simple, but it has gotten more complicated over time and will likely become even more complicated in the future. Note: The test conf files have all been renamed .conf instead of .argv, and tests/networkxml2xmlargvdata was moved to tests/networkxml2xmlconfdata.
2012-12-06 17:20:39 +00:00
dhcp-lease-max=253
dhcp-hostsfile=/var/lib/libvirt/dnsmasq/default.hostsfile
addn-hosts=/var/lib/libvirt/dnsmasq/default.addnhosts
tests: do not test dnsmasq older than 2.67 Prepare to retire older versions by droping older tests. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Laine Stump <laine@redhat.com>
2021-12-14 18:10:29 +00:00
dhcp-range=2001:db8:ac10:fe01::1,ra-only
dhcp-range=2001:db8:ac10:fd01::1,ra-only
Reference in New Issue Copy Permalink