External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-11-09 23:10:08 +00:00
Code Issues Packages Projects Releases Wiki Activity
be58733d90
libvirt/po/POTFILES

399 lines
9.9 KiB
Plaintext
Raw Normal View History

po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/access/viraccessapicheck.c
src/access/viraccessapichecklxc.c
src/access/viraccessapicheckqemu.c
src/admin/admin_client.h
src/admin/admin_server_dispatch_stubs.h
src/remote/remote_client_bodies.h
src/remote/remote_daemon_dispatch_stubs.h
src/access/viraccessdriverpolkit.c
src/access/viraccessmanager.c
src/admin/admin_server.c
src/admin/admin_server_dispatch.c
src/admin/libvirt-admin.c
src/bhyve/bhyve_capabilities.c
src/bhyve/bhyve_command.c
src/bhyve/bhyve_domain.c
src/bhyve/bhyve_driver.c
src/bhyve/bhyve_firmware.c
src/bhyve/bhyve_monitor.c
src/bhyve/bhyve_parse_command.c
src/bhyve/bhyve_process.c
src/ch/ch_conf.c
src/ch/ch_domain.c
src/ch/ch_driver.c
ch: Enable ETHERNET Network mode support enable VIR_DOMAIN_NET_TYPE_ETHERNET network support for ch guests. Tested with following interface config: <interface type='ethernet'> <target dev='chtap0' managed="yes"/> <model type='virtio'/> <driver queues='2'/> <interface> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2024-01-16 21:25:43 +00:00
src/ch/ch_interface.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/ch/ch_monitor.c
src/ch/ch_process.c
src/conf/backup_conf.c
src/conf/capabilities.c
src/conf/checkpoint_conf.c
src/conf/cpu_conf.c
src/conf/device_conf.c
src/conf/domain_addr.c
src/conf/domain_capabilities.c
src/conf/domain_conf.c
src/conf/domain_event.c
conf: Separate domain post parse code into domain_postparse.c The domain post parse functions currently live in domain_conf.c which thus grows always larger. Mimic what we've done for the validation code and move the post parse code into a separate file: domain_postparse.c. I've started by moving every function with PostParse in its name into the new file and then compile hunting for helper functions only to move them as well. In the end, I've moved virDomainDefPostParse symbol in libvirt_private.syms into a new section. And while virDomainDeviceDefPostParseOne() is made 'public' in domain_postparse.h too, I'm not exporting it because it has no caller outside src/conf/ and it's unlikely it ever will. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-07-07 08:03:33 +00:00
src/conf/domain_postparse.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/conf/domain_validate.c
src/conf/interface_conf.c
src/conf/netdev_bandwidth_conf.c
src/conf/netdev_vlan_conf.c
src/conf/netdev_vport_profile_conf.c
src/conf/network_conf.c
src/conf/networkcommon_conf.c
src/conf/node_device_conf.c
src/conf/node_device_util.c
src/conf/numa_conf.c
src/conf/nwfilter_conf.c
src/conf/nwfilter_params.c
src/conf/object_event.c
src/conf/secret_conf.c
src/conf/snapshot_conf.c
src/conf/storage_adapter_conf.c
src/conf/storage_conf.c
src/conf/storage_encryption_conf.c
src/conf/storage_source_conf.c
src/conf/virchrdev.c
move files: hypervisor/domain_job -> conf/virdomainjob The following patches move job object as a member into the domain object. Because of this, domain_conf (where the domain object is defined) needs to import the file with the job object. It makes sense to move jobs to the same level as the domain_conf: into src/conf/ Signed-off-by: Kristina Hanicova <khanicov@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
2022-09-05 13:57:01 +00:00
src/conf/virdomainjob.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/conf/virdomainmomentobjlist.c
src/conf/virdomainobjlist.c
src/conf/virnetworkobj.c
src/conf/virnetworkportdef.c
src/conf/virnodedeviceobj.c
src/conf/virnwfilterbindingdef.c
src/conf/virnwfilterbindingobj.c
src/conf/virnwfilterbindingobjlist.c
src/conf/virnwfilterobj.c
src/conf/virsavecookie.c
src/conf/virsecretobj.c
src/conf/virstorageobj.c
src/cpu/cpu.c
src/cpu/cpu_arm.c
src/cpu/cpu_map.c
src/cpu/cpu_ppc64.c
cpu_riscv64.c: add update() implementation At this moment it is not possible to launch a 'riscv64' domain if a CPU definition is presented in the domain. For example, adding this CPU definition: <cpu mode='custom' match='exact' check='none'> <model fallback='forbid'>rv64</model> </cpu> Will trigger the following error: $ sudo ./run tools/virsh start riscv-virt1 error: Failed to start domain 'riscv-virt1' error: this function is not supported by the connection driver: cannot update guest CPU for riscv64 architecture The error comes from virCPUUpdate(), via qemuProcessUpdateGuestCPU(), and it's caused by the absence of the 'update' API in the existing RISC-V driver. Add an 'update' API impl to the RISC-V driver to allow for CPU definitions to be declared in RISC-V domains. This API was copied from the ARM driver (virCPUarmUpdate()) since it's a good enough implementation to get us going. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2023-04-28 19:57:28 +00:00
src/cpu/cpu_riscv64.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/cpu/cpu_s390.c
src/cpu/cpu_x86.c
src/datatypes.c
src/driver.c
src/esx/esx_driver.c
src/esx/esx_network_driver.c
src/esx/esx_storage_backend_iscsi.c
src/esx/esx_storage_backend_vmfs.c
src/esx/esx_storage_driver.c
src/esx/esx_stream.c
src/esx/esx_util.c
src/esx/esx_util.h
src/esx/esx_vi.c
src/esx/esx_vi_methods.c
src/esx/esx_vi_types.c
src/hyperv/hyperv_driver.c
src/hyperv/hyperv_network_driver.c
src/hyperv/hyperv_util.c
src/hyperv/hyperv_wmi.c
src/hypervisor/domain_cgroup.c
src/hypervisor/domain_driver.c
hypervisor: Move domain interface mgmt methods Move domain interface management methods from qemu to hypervisor. This refactoring allows the domain management methods to be shared between CH and qemu drivers. This commit does not introduce any functional changes. Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2024-01-16 21:25:40 +00:00
src/hypervisor/domain_interface.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/hypervisor/virhostdev.c
src/interface/interface_backend_netcf.c
src/interface/interface_backend_udev.c
src/internal.h
src/libvirt-domain-checkpoint.c
src/libvirt-domain-snapshot.c
src/libvirt-domain.c
src/libvirt-host.c
src/libvirt-lxc.c
src/libvirt-network.c
src/libvirt-nodedev.c
src/libvirt-nwfilter.c
src/libvirt-qemu.c
src/libvirt-secret.c
src/libvirt-storage.c
src/libvirt-stream.c
src/libvirt.c
src/libxl/libxl_capabilities.c
src/libxl/libxl_conf.c
src/libxl/libxl_domain.c
src/libxl/libxl_driver.c
src/libxl/libxl_migration.c
src/libxl/xen_common.c
src/libxl/xen_xl.c
src/libxl/xen_xm.c
src/locking/lock_daemon.c
src/locking/lock_daemon_dispatch.c
src/locking/lock_driver_lockd.c
src/locking/lock_driver_sanlock.c
src/locking/lock_manager.c
src/locking/sanlock_helper.c
logging: add log cleanup for obsolete domains Before, logs from deleted machines have been piling up, since there were no garbage collection mechanism. Now, virtlogd can be configured to periodically scan the log folder for orphan logs with no recent modifications and delete it. A single chain of recent and rotated logs is deleted in a single transaction. Signed-off-by: Oleg Vasilev <oleg.vasilev@virtuozzo.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2023-01-30 15:00:01 +00:00
src/logging/log_cleaner.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/logging/log_daemon.c
src/logging/log_daemon_dispatch.c
src/logging/log_handler.c
src/logging/log_manager.c
src/lxc/lxc_cgroup.c
src/lxc/lxc_conf.c
src/lxc/lxc_container.c
src/lxc/lxc_controller.c
src/lxc/lxc_domain.c
src/lxc/lxc_driver.c
src/lxc/lxc_fuse.c
src/lxc/lxc_hostdev.c
src/lxc/lxc_native.c
src/lxc/lxc_process.c
src/network/bridge_driver.c
network: create separate config object for virNetworkDriverState Similar to the other drivers, virNetworkDriverState now has a virObject-derived object called virNetworkDriverConfig which is used for config items. As a starting point, the directory paths used by the network driver are moved there (again, parallelling what is done for other drivers). Using items in virNetworkDriverConfig is (yes, again) similar to using items in the other drivers' config - anything in the config object is immutable (once initialized), so the state object only needs to be locked while getting a reference to the config object, and then the members of the config object can be safely used until the config object is unrefed. Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-03-13 18:21:02 +00:00
src/network/bridge_driver_conf.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/network/bridge_driver_linux.c
src/network/leaseshelper.c
util/network: move viriptables.[ch] from util to network directory These functions are only ever used by the network driver, and are so specific to the network driver's usage of iptables that they likely won't ever be used elsewhere. The files are renamed to network_iptables.[ch] to be more in line with driver-specific file naming conventions. Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2024-04-20 02:19:42 +00:00
src/network/network_iptables.c
network: add an nftables backend for network driver's firewall construction Support using nftables to setup the firewall for each virtual network, rather than iptables. The initial implementation of the nftables backend creates (almost) exactly the same ruleset as the iptables backend, determined by running the following commands on a host that has an active virtual network: iptables-save >iptables.txt iptables-restore-translate -f iptables.txt (and the similar ip6tables-save/ip6tables-restore-translate for an IPv6 network). Correctness of the new backend was checked by comparing the output of: nft list ruleset when the backend is set to iptables and when it is set to nftables. This page was used as a guide: https://wiki.nftables.org/wiki-nftables/index.php/Moving_from_iptables_to_nftables The only differences between the rules created by the nftables backed vs. the iptables backend (aside from a few inconsequential changes in display order of some chains/options) are: 1) When we add nftables rules, rather than adding them in the system-created "filter" and "nat" tables, we add them in a private table (ie only we should be using it) created by us called "libvirt" (the system-created "filter" and "nat" tables can't be used because adding any rules to those tables directly with nft will cause failure of any legacy application attempting to use iptables when it tries to list the iptables rules (e.g. "iptables -S"). (NB: in nftables only a single table is required for both nat and filter rules - the chains for each are differentiated by specifying different "hook" locations for the toplevel chain of each) 2) Since the rules that were added to allow tftp/dns/dhcp traffic from the guests to the host are unnecessary in the context of nftables, those rules aren't added. (Longer explanation: In the case of iptables, all rules were in a single table, and it was always assumed that there would be some "catch-all" REJECT rule added by "someone else" in the case that a packet didn't match any specific rules, so libvirt added these specific rules to ensure that, no matter what other rules were added by any other subsystem, the guests would still have functional tftp/dns/dhcp. For nftables though, the rules added by each subsystem are in a separate table, and in order for traffic to be accepted, it must be accepted by *all* tables, so just adding the specific rules to libvirt's table doesn't help anything (as the default for the libvirt table is ACCEPT anyway) and it just isn't practical/possible for libvirt to find *all* other tables and add rules in all of them to make sure the traffic is accepted. libvirt does this for firewalld (it creates a "libvirt" zone that allows tftp/dns/dhcp, and adds all virtual network bridges to that zone), however, so in that case no extra work is required of the sysadmin.) 3) nftables doesn't support the "checksum mangle" rule (or any equivalent functionality) that we have historically added to our iptables rules, so the nftables rules we add have nothing related to checksum mangling. (NB: The result of (3) is that if you a) have a very old guest (RHEL5 era or earlier) and b) that guest is using a virtio-net network device, and c) the virtio-net device is using vhost packet processing (the default) then DHCP on the guest will fail. You can work around this by adding <driver name='qemu'/> to the <interface> XML for the guest). There are certainly much better nftables rulesets that could be used instead of those implemented here, and everything is in place to make future changes to the rules that are used simple and free of surprises (e.g. the rules that are added have coresponding "removal" commands added to the network status so that we will always remove exactly the rules that were previously added rather than trying to remove the rules that "the current build of libvirt would have added" (which will be incorrect the first time we run a libvirt with a newly modified ruleset). For this initial implementation though, I wanted the nftables rules to be as identical to the iptables rules as possible, just to make it easier to verify that everything is working. The backend can be manually chosen using the firewall_backend setting in /etc/libvirt/network.conf. libvirtd/virtnetworkd will read this setting when it starts; if there is no explicit setting, it will check for availability of FIREWALL_BACKEND_DEFAULT_1 and then FIREWALL_BACKEND_DEFAULT_2 (which are set at build time in meson_options.txt or by adding -Dfirewall_backend_default_n=blah to the meson commandline), and use the first backend that is available (ie, that has the necessary programs installed). The standard meson_options.txt is set to check for nftables first, and then iptables. Although it should be very safe to change the default backend from iptables to nftables, that change is left for a later patch, to show how the change in default can be undone if someone really needs to do that. Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Tested-by: Daniel P. Berrangé <berrange@redhat.com>
2024-04-20 02:19:43 +00:00
src/network/network_nftables.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/node_device/node_device_driver.c
src/node_device/node_device_udev.c
src/nwfilter/nwfilter_dhcpsnoop.c
src/nwfilter/nwfilter_driver.c
src/nwfilter/nwfilter_ebiptables_driver.c
src/nwfilter/nwfilter_gentech_driver.c
src/nwfilter/nwfilter_learnipaddr.c
src/openvz/openvz_conf.c
src/openvz/openvz_driver.c
src/openvz/openvz_util.c
src/qemu/qemu_agent.c
src/qemu/qemu_alias.c
src/qemu/qemu_backup.c
src/qemu/qemu_block.c
src/qemu/qemu_blockjob.c
src/qemu/qemu_capabilities.c
src/qemu/qemu_cgroup.c
src/qemu/qemu_checkpoint.c
src/qemu/qemu_command.c
src/qemu/qemu_conf.c
src/qemu/qemu_dbus.c
src/qemu/qemu_domain.c
src/qemu/qemu_domain_address.c
src/qemu/qemu_domainjob.c
src/qemu/qemu_driver.c
src/qemu/qemu_extdevice.c
src/qemu/qemu_fd.c
src/qemu/qemu_firmware.c
src/qemu/qemu_hostdev.c
src/qemu/qemu_hotplug.c
src/qemu/qemu_interface.c
src/qemu/qemu_interop_config.c
qemu: Extract qemuDomainLogContext into a new file This will allow us to use it for nbdkit logging in upcoming commits. Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2023-01-12 15:51:43 +00:00
src/qemu/qemu_logcontext.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/qemu/qemu_migration.c
src/qemu/qemu_migration_cookie.c
src/qemu/qemu_migration_params.c
src/qemu/qemu_monitor.c
src/qemu/qemu_monitor_json.c
src/qemu/qemu_monitor_text.c
src/qemu/qemu_namespace.c
qemu: implement persistent file cache for nbdkit caps Implement the loadFile and saveFile virFileCacheHandlers callbacks so that nbdkit capabilities are cached perstistently across daemon restarts. The format and implementation is modeled on the qemu capabilities, but simplified slightly. Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2022-08-05 20:24:08 +00:00
src/qemu/qemu_nbdkit.c
qemu: hook up passt config to qemu domains This consists of (1) adding the necessary args to the qemu commandline netdev option, and (2) starting a passt process prior to starting qemu, and making sure that it is terminated when it's no longer needed. Under normal circumstances, passt will terminate itself as soon as qemu closes its socket, but in case of some error where qemu is never started, or fails to startup completely, we need to terminate passt manually. Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-12-15 19:19:16 +00:00
src/qemu/qemu_passt.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/qemu/qemu_process.c
src/qemu/qemu_qapi.c
src/qemu/qemu_saveimage.c
src/qemu/qemu_slirp.c
src/qemu/qemu_snapshot.c
src/qemu/qemu_tpm.c
src/qemu/qemu_validate.c
src/qemu/qemu_vhost_user.c
src/qemu/qemu_vhost_user_gpu.c
src/qemu/qemu_virtiofs.c
src/remote/remote_daemon.c
src/remote/remote_daemon_config.c
src/remote/remote_daemon_dispatch.c
src/remote/remote_daemon_stream.c
src/remote/remote_driver.c
src/remote/remote_sockets.c
src/remote/remote_ssh_helper.c
src/rpc/virkeepalive.c
src/rpc/virnetclient.c
src/rpc/virnetclientprogram.c
src/rpc/virnetclientstream.c
src/rpc/virnetdaemon.c
src/rpc/virnetlibsshsession.c
src/rpc/virnetmessage.c
src/rpc/virnetsaslcontext.c
src/rpc/virnetserver.c
src/rpc/virnetserverclient.c
src/rpc/virnetserverprogram.c
src/rpc/virnetserverservice.c
src/rpc/virnetsocket.c
src/rpc/virnetsshsession.c
rpc: split TLS cert validation into separate file The TLS cert validation logic will be reused for the new impl of the virt-pki-validate tool. Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2024-06-07 13:15:45 +00:00
src/rpc/virnettlscert.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/rpc/virnettlscontext.c
src/secret/secret_driver.c
src/security/security_apparmor.c
src/security/security_dac.c
src/security/security_driver.c
src/security/security_manager.c
src/security/security_selinux.c
src/security/security_util.c
src/security/virt-aa-helper.c
src/storage/parthelper.c
src/storage/storage_backend.c
src/storage/storage_backend_disk.c
src/storage/storage_backend_fs.c
src/storage/storage_backend_gluster.c
src/storage/storage_backend_iscsi.c
src/storage/storage_backend_iscsi_direct.c
src/storage/storage_backend_logical.c
src/storage/storage_backend_mpath.c
src/storage/storage_backend_rbd.c
src/storage/storage_backend_scsi.c
src/storage/storage_backend_vstorage.c
src/storage/storage_backend_zfs.c
src/storage/storage_driver.c
src/storage/storage_util.c
src/storage_file/storage_file_backend.c
src/storage_file/storage_file_backend_fs.c
src/storage_file/storage_file_backend_gluster.c
src/storage_file/storage_file_probe.c
src/storage_file/storage_source.c
src/storage_file/storage_source_backingstore.c
src/test/test_driver.c
src/util/iohelper.c
util: Introduce virAcpi module The aim of this new module is to contain code that's parsing ACPI tables. For now, only parsing of IORT table is implemented (it's ARM specific table). And since we only need to check whether the table contains SMMU record, the code is very simplified. I've followed the specification published here: https://developer.arm.com/documentation/den0049/latest/ Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2023-04-04 13:37:01 +00:00
src/util/viracpi.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/util/viralloc.c
src/util/virarptable.c
src/util/viraudit.c
src/util/virauth.c
src/util/virauthconfig.c
src/util/virbitmap.c
src/util/vircgroup.c
util: add virCCWDeviceAddressFromString to virccw Add a method to parse a ccw device address from a string. Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-13 10:31:10 +00:00
src/util/virccw.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
src/util/vircgroupbackend.c
src/util/vircgroupbackend.h
src/util/vircgroupv1.c
src/util/vircgroupv2.c
src/util/vircgroupv2devices.c
src/util/vircommand.c
src/util/virconf.c
src/util/vircrypto.c
src/util/virdaemon.c
src/util/virdevmapper.c
src/util/virdnsmasq.c
src/util/virerror.c
src/util/virerror.h
src/util/virevent.c
src/util/vireventthread.c
src/util/virfcp.c
src/util/virfdstream.c
src/util/virfile.c
src/util/virfilecache.c
src/util/virfirewall.c
src/util/virfirewalld.c
src/util/virfirmware.c
src/util/virgdbus.c
src/util/virhash.c
src/util/virhook.c
src/util/virhostcpu.c
src/util/virhostmem.c
src/util/virhostuptime.c
src/util/viridentity.c
src/util/virinitctl.c
src/util/viriscsi.c
src/util/virjson.c
src/util/virlease.c
src/util/virlockspace.c
src/util/virlog.c
src/util/virmacmap.c
src/util/virmdev.c
src/util/virmodule.c
src/util/virnetdev.c
src/util/virnetdevbandwidth.c
src/util/virnetdevbridge.c
src/util/virnetdevip.c
src/util/virnetdevmacvlan.c
src/util/virnetdevmidonet.c
src/util/virnetdevopenvswitch.c
src/util/virnetdevtap.c
src/util/virnetdevveth.c
src/util/virnetdevvportprofile.c
src/util/virnetlink.c
src/util/virnodesuspend.c
src/util/virnuma.c
src/util/virnvme.c
src/util/virobject.c
src/util/virpci.c
src/util/virperf.c
src/util/virpidfile.c
src/util/virpolkit.c
src/util/virportallocator.c
src/util/virprocess.c
src/util/virqemu.c
src/util/virrandom.c
src/util/virresctrl.c
src/util/virrotatingfile.c
src/util/virscsi.c
src/util/virscsihost.c
src/util/virscsivhost.c
src/util/virsecret.c
src/util/virsocketaddr.c
src/util/virstoragefile.c
src/util/virstring.c
src/util/virsysinfo.c
src/util/virsystemd.c
src/util/virthreadjob.c
src/util/virthreadpool.c
src/util/virtime.c
src/util/virtpm.c
src/util/virtypedparam-public.c
src/util/virtypedparam.c
src/util/viruri.c
src/util/virusb.c
src/util/virutil.c
src/util/virvhba.c
src/util/virvsock.c
src/util/virxml.c
src/vbox/vbox_XPCOMCGlue.c
src/vbox/vbox_common.c
src/vbox/vbox_driver.c
src/vbox/vbox_network.c
src/vbox/vbox_snapshot_conf.c
src/vbox/vbox_storage.c
src/vbox/vbox_tmpl.c
src/vmware/vmware_conf.c
src/vmware/vmware_driver.c
src/vmx/vmx.c
src/vz/vz_driver.c
src/vz/vz_sdk.c
src/vz/vz_utils.c
src/vz/vz_utils.h
tests/virpolkittest.c
tools/libvirt-guests.sh.in
tools: Introduce SSH proxy This allows users to SSH into a domain with a VSOCK device: ssh user@qemu/machineName So far, only QEMU domains are supported AND qemu:///system is looked for the first for 'machineName' followed by qemu:///session. I took an inspiration from Systemd's ssh proxy [1] [2]. To just work out of the box, it requires (yet unreleased) systemd to be running inside the guest to set up a socket activated SSHD on the VSOCK. Alternatively, users can set up the socket activation themselves, or just run a socat that'll forward vsock <-> TCP communication. 1: https://github.com/systemd/systemd/blob/main/src/ssh-generator/ssh-proxy.c 2: https://github.com/systemd/systemd/blob/main/src/ssh-generator/20-systemd-ssh-proxy.conf.in Resolves: https://gitlab.com/libvirt/libvirt/-/issues/579 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2024-04-16 14:32:26 +00:00
tools/ssh-proxy/ssh-proxy.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
tools/virsh-backup.c
tools/virsh-checkpoint.c
tools/virsh-completer-host.c
tools/virsh-console.c
tools/virsh-domain-event.c
tools/virsh-domain-monitor.c
tools/virsh-domain.c
tools/virsh-edit.c
tools/virsh-host.c
tools/virsh-interface.c
tools/virsh-network.c
tools/virsh-nodedev.c
tools/virsh-nwfilter.c
tools/virsh-pool.c
tools/virsh-secret.c
tools/virsh-snapshot.c
tools/virsh-util.c
tools/virsh-volume.c
tools/virsh.c
tools/virsh.h
tools/virt-admin.c
tools/virt-host-validate-bhyve.c
tools/virt-host-validate-ch.c
tools/virt-host-validate-common.c
tools/virt-host-validate-lxc.c
tools/virt-host-validate-qemu.c
tools/virt-host-validate.c
tools/virt-login-shell-helper.c
tools/virt-pki-query-dn.c
tools: reimplement virt-pki-validate in C The virt-pki-validate tool is currently a shell script. We have a general goal of eliminating use of shell in the project. By doing a new implementation in C, we can also make use of our more thorough sanity checking code to validate the certificate setup. This new implementation the same output format as the host validation tool for a more consistent user experiance. It also eliminates the requirement to have certtool installed on libvirt hosts, which has been an issue for Fedora flatpak packages since certtool isn't in the default platform runtime. Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2024-06-07 10:27:10 +00:00
tools/virt-pki-validate.c
tools: split off common helpers for host validate tool The common messaging helpers will be reused in the new impl of the virt-pki-validate tool. Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2024-06-06 16:07:24 +00:00
tools/virt-validate-common.c
po: Drop prefixes from POTFILES.in Commit 8beb7fdd0e23 changed the handling of POTFILES so that it could cope with files being located in either the source or build directory: it did so by adding @SRCDIR@ and @BUILDDIR@ respectively at the beginning of each line, and then converting them back to the actual values when generating POTFILES from POTFILES.in. Later, commit c6a0d3ff8b4e started passing --directory to xgettext, which resulted in the tool being able to locate files regardless of whether they are in the source or build directory. However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in only to be stripped when generating POTFILES. Simplify things by not storing information that we know we're going to discard later. Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-05-16 14:46:16 +00:00
tools/vsh-table.c
tools/vsh.c
tools/vsh.h
Reference in New Issue Copy Permalink