External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-23 14:15:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
bfb507853a
libvirt/tests/qemuxml2xmloutdata/q35-usb2-multi.xml

92 lines
3.9 KiB
XML
Raw Normal View History

qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
<domain type='qemu'>
<name>q35-test</name>
<uuid>11dbdcdd-4c3b-482b-8903-9bdb8c0a2774</uuid>
<memory unit='KiB'>2097152</memory>
<currentMemory unit='KiB'>2097152</currentMemory>
<vcpu placement='static' cpuset='0-1'>2</vcpu>
<os>
<type arch='x86_64' machine='q35'>hvm</type>
<boot dev='hd'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
<emulator>/usr/bin/qemu-system-x86_64</emulator>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
<disk type='block' device='disk'>
tests: qemuxml2xml: Remove testing with allowed format detection Nobody should use format detection due to security implications. The result of the change is that 'raw' format will be printed unless specified explicitly. Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2018-03-02 14:43:55 +00:00
<driver name='qemu' type='raw'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
<source dev='/dev/HostVG/QEMUGuest1'/>
<target dev='sda' bus='sata'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<controller type='pci' index='0' model='pcie-root'/>
<controller type='pci' index='1' model='dmi-to-pci-bridge'>
<model name='i82801b11-bridge'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
</controller>
<controller type='pci' index='2' model='pci-bridge'>
<model name='pci-bridge'/>
<target chassisNr='56'/>
conf: allow use of slot 0 in a dmi-to-pci-bridge When support for dmi-to-pci-bridge was added, it was assumed that, just as with the pci-root bus, slot 0 was reserved. This is not the case - it can be used to connect a device just like any other slot, so remove the restriction and update the test cases that auto-assign an address on a dmi-to-pci-bridge.
2016-03-02 20:29:33 +00:00
<address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
</controller>
<controller type='usb' index='0' model='ich9-ehci1'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1d' function='0x7'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<master startport='0'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1d' function='0x0' multifunction='on'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<master startport='2'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1d' function='0x1'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<master startport='4'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1d' function='0x2'/>
</controller>
<controller type='usb' index='1' model='ich9-ehci1'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1a' function='0x7'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
</controller>
<controller type='usb' index='1' model='ich9-uhci1'>
<master startport='0'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1a' function='0x0' multifunction='on'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
</controller>
<controller type='usb' index='1' model='ich9-uhci2'>
<master startport='2'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1a' function='0x1'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
</controller>
<controller type='usb' index='1' model='ich9-uhci3'>
<master startport='4'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x1a' function='0x2'/>
</controller>
<controller type='usb' index='2' model='ich9-ehci1'>
<address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x7'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
</controller>
<controller type='usb' index='2' model='ich9-uhci1'>
<master startport='0'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0' multifunction='on'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
</controller>
<controller type='usb' index='2' model='ich9-uhci2'>
<master startport='2'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x1'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
</controller>
<controller type='usb' index='2' model='ich9-uhci3'>
<master startport='4'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x2'/>
</controller>
<controller type='sata' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
</controller>
device: cleanup input device code The current code was a little bit odd. At first we've removed all possible implicit input devices from domain definition to add them later back if there was any graphics device defined while parsing XML description. That's not all, while formating domain definition to XML description we at first ignore any input devices with bus different to USB and VIRTIO and few lines later we add implicit input devices to XML. This seems to me as a lot of code for nothing. This patch may look to be more complicated than original approach, but this is a preferred way to modify/add driver specific stuff only in those drivers and not deal with them in common parsing/formating functions. The update is to add those implicit input devices into config XML to follow the real HW configuration visible by guest OS. There was also inconsistence between our behavior and QEMU's in the way, that in QEMU there is no way how to disable those implicit input devices for x86 architecture and they are available always, even without graphics device. This applies also to XEN hypervisor. VZ driver already does its part by putting correct implicit devices into live XML. Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-11 11:40:32 +00:00
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
qemu: populate <audio> element with default config Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable - VNC - set to "none", unless passthrough of host env variable is set - SPICE - always set to "spice" - SDL - always passthrough host env - No graphics - set to "none", unless passthrough of host env variable is set The setting of the QEMU_AUDIO_DRV env variable is done in the code which configures graphics. If no <audio> element is present, we now auto-populate <audio> elements to reflect this historical default config. This avoids need to set audio env when processing graphics. Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-24 14:24:10 +00:00
<audio id='1' type='none'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
<video>
domain_conf: always set primary video device as primary We always place primary video device at first place, to make it easier to create a qemu command or format an xml, but we should also set the primary boolean for primary video device to 'true'. Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-02-23 12:00:24 +00:00
<model type='qxl' ram='65536' vram='32768' vgamem='8192' heads='1' primary='yes'/>
tests: qemuxml2xml: assign device addresses We use the PreFormat callback for this. Many test cases need to be extended to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors. One test case (pcie-root-port-too-many) is dropped, since it was meant only for checking an error condition in qemuxml2argv, and one we add in AssignAddresses it errors here too. Long term I think AssignAddresses should be handled in qemu's PostParse callback, but that's not entirely straightforward. Handling it here means we can get the test suite churn over with.
2016-01-27 21:03:52 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
</video>
qemu: Add implicit watchdog for q35 machine types The iTCO watchdog is part of the q35 machine type since its inception, we just did not add it implicitly. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2137346 Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-01-20 10:22:22 +00:00
<watchdog model='itco' action='reset'/>
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
<memballoon model='none'/>
</devices>
</domain>
Reference in New Issue Copy Permalink