2005-11-02 12:50:21 +00:00
dnl Process this file with autoconf to produce a configure script.
2007-09-18 23:46:18 +00:00
2010-08-04 13:03:25 +00:00
AC_INIT([libvirt], [0.8.3])
2008-05-22 15:34:02 +00:00
AC_CONFIG_SRCDIR([src/libvirt.c])
AC_CONFIG_AUX_DIR([build-aux])
2010-01-25 15:00:43 +00:00
AC_CONFIG_HEADERS([config.h])
2010-02-17 13:45:10 +00:00
AC_CONFIG_MACRO_DIR([m4])
2007-09-18 23:46:18 +00:00
dnl Make automake keep quiet about wildcards & other GNUmake-isms
AM_INIT_AUTOMAKE([-Wno-portability])
2009-07-08 09:51:59 +00:00
# Use the silent-rules feature when possible.
m4_ifndef([AM_SILENT_RULES], [m4_define([AM_SILENT_RULES],[])])
AM_SILENT_RULES([yes])
2005-11-02 12:50:21 +00:00
AC_CANONICAL_HOST
2008-03-31 12:13:52 +00:00
LIBVIRT_MAJOR_VERSION=`echo $VERSION | awk -F. '{print $1}'`
LIBVIRT_MINOR_VERSION=`echo $VERSION | awk -F. '{print $2}'`
LIBVIRT_MICRO_VERSION=`echo $VERSION | awk -F. '{print $3}'`
2006-02-15 13:21:17 +00:00
LIBVIRT_VERSION=$LIBVIRT_MAJOR_VERSION.$LIBVIRT_MINOR_VERSION.$LIBVIRT_MICRO_VERSION$LIBVIRT_MICRO_VERSION_SUFFIX
LIBVIRT_VERSION_INFO=`expr $LIBVIRT_MAJOR_VERSION + $LIBVIRT_MINOR_VERSION`:$LIBVIRT_MICRO_VERSION:$LIBVIRT_MINOR_VERSION
LIBVIRT_VERSION_NUMBER=`expr $LIBVIRT_MAJOR_VERSION \* 1000000 + $LIBVIRT_MINOR_VERSION \* 1000 + $LIBVIRT_MICRO_VERSION`
2005-11-02 12:50:21 +00:00
2008-05-22 15:34:02 +00:00
AC_SUBST([LIBVIRT_MAJOR_VERSION])
AC_SUBST([LIBVIRT_MINOR_VERSION])
AC_SUBST([LIBVIRT_MICRO_VERSION])
AC_SUBST([LIBVIRT_VERSION])
AC_SUBST([LIBVIRT_VERSION_INFO])
AC_SUBST([LIBVIRT_VERSION_NUMBER])
2005-11-02 12:50:21 +00:00
2007-09-19 15:35:00 +00:00
dnl Required minimum versions of all libs we depend on
2009-04-03 15:25:38 +00:00
LIBXML_REQUIRED="2.6.0"
2007-11-26 11:34:57 +00:00
GNUTLS_REQUIRED="1.0.25"
2007-09-19 01:56:55 +00:00
AVAHI_REQUIRED="0.6.0"
2007-12-05 18:21:27 +00:00
POLKIT_REQUIRED="0.6"
2008-02-20 15:52:17 +00:00
PARTED_REQUIRED="1.8.0"
2009-11-20 18:43:59 +00:00
NETCF_REQUIRED="0.1.4"
2009-11-13 12:12:09 +00:00
UDEV_REQUIRED=145
PCIACCESS_REQUIRED=0.10.0
XMLRPC_REQUIRED=1.14.0
HAL_REQUIRED=0.5.0
DEVMAPPER_REQUIRED=1.0.0
LIBCURL_REQUIRED="7.18.0"
nwfilter: Support for learning a VM's IP address
This patch implements support for learning a VM's IP address. It uses
the pcap library to listen on the VM's backend network interface (tap)
or the physical ethernet device (macvtap) and tries to capture packets
with source or destination MAC address of the VM and learn from DHCP
Offers, ARP traffic, or first-sent IPv4 packet what the IP address of
the VM's interface is. This then allows to instantiate the network
traffic filtering rules without the user having to provide the IP
parameter somewhere in the filter description or in the interface
description as a parameter. This only supports to detect the parameter
IP, which is for the assumed single IPv4 address of a VM. There is not
support for interfaces that may have multiple IP addresses (IP
aliasing) or IPv6 that may then require more than one valid IP address
to be detected. A VM can have multiple independent interfaces that each
uses a different IP address and in that case it will be attempted to
detect each one of the address independently.
So, when for example an interface description in the domain XML has
looked like this up to now:
<interface type='bridge'>
<source bridge='mybridge'/>
<model type='virtio'/>
<filterref filter='clean-traffic'>
<parameter name='IP' value='10.2.3.4'/>
</filterref>
</interface>
you may omit the IP parameter:
<interface type='bridge'>
<source bridge='mybridge'/>
<model type='virtio'/>
<filterref filter='clean-traffic'/>
</interface>
Internally I am walking the 'tree' of a VM's referenced network filters
and determine with the given variables which variables are missing. Now,
the above IP parameter may be missing and this causes a libvirt-internal
thread to be started that uses the pcap library's API to listen to the
backend interface (in case of macvtap to the physical interface) in an
attempt to determine the missing IP parameter. If the backend interface
disappears the thread terminates assuming the VM was brought down. In
case of a macvtap device a timeout is being used to wait for packets
from the given VM (filtering by VM's interface MAC address). If the VM's
macvtap device disappeared the thread also terminates. In all other
cases it tries to determine the IP address of the VM and will then apply
the rules late on the given interface, which would have happened
immediately if the IP parameter had been explicitly given. In case an
error happens while the firewall rules are applied, the VM's backend
interface is 'down'ed preventing it to communicate. Reasons for failure
for applying the network firewall rules may that an ebtables/iptables
command failes or OOM errors. Essentially the same failure reasons may
occur as when the firewall rules are applied immediately on VM start,
except that due to the late application of the filtering rules the VM
now is already running and cannot be hindered anymore from starting.
Bringing down the whole VM would probably be considered too drastic.
While a VM's IP address is attempted to be determined only limited
updates to network filters are allowed. In particular it is prevented
that filters are modified in such a way that they would introduce new
variables.
A caveat: The algorithm does not know which one is the appropriate IP
address of a VM. If the VM spoofs an IP address in its first ARP traffic
or IPv4 packets its filtering rules will be instantiated for this IP
address, thus 'locking' it to the found IP address. So, it's still
'safer' to explicitly provide the IP address of a VM's interface in the
filter description if it is known beforehand.
* configure.ac: detect libpcap
* libvirt.spec.in: require libpcap[-devel] if qemu is built
* src/internal.h: add the new ATTRIBUTE_PACKED define
* src/Makefile.am src/libvirt_private.syms: add the new modules and symbols
* src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added
* src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch]
src/nwfilter/nwfilter_ebiptables_driver.[ch]
src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in
* tests/nwfilterxml2xmltest: extend testing
2010-04-07 21:02:18 +00:00
LIBPCAP_REQUIRED="1.0.0"
2010-05-25 19:31:38 +00:00
LIBNL_REQUIRED="1.1"
2007-09-19 01:56:55 +00:00
2007-11-29 17:41:57 +00:00
dnl Checks for C compiler.
2005-11-02 13:19:10 +00:00
AC_PROG_CC
AC_PROG_INSTALL
AC_PROG_CPP
2007-09-20 18:40:36 +00:00
Use gnulib, starting with its physmem and getaddrinfo modules.
New files go into these directories:
gnulib/lib
gnulib/m4
gnulib/tests
* bootstrap: A wrapper around gnulib-tool.
* configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY
before any macro that uses AC_COMPILE_IFELSE.
(AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile.
* Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests
early enough that those tests run before any libvirt unit tests.
* m4/Makefile.am: Remove file. Not needed.
* src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la.
* src/nodeinfo.c: Include "physmem.h".
* qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h".
(MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions.
(virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate.
* tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS): Add ../gnulib/lib/libgnu.la.
* qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la.
* tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total
memory from a file.
Update expected output not to include "Memory: NNNN"
* tests/nodeinfodata/linux-nodeinfo-1.txt:
* tests/nodeinfodata/linux-nodeinfo-2.txt:
* tests/nodeinfodata/linux-nodeinfo-3.txt:
* tests/nodeinfodata/linux-nodeinfo-4.txt:
* tests/nodeinfodata/linux-nodeinfo-5.txt:
* tests/nodeinfodata/linux-nodeinfo-6.txt:
* src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that
would conflict with the one now in "config.h".
* autogen.sh: Add -I gnulib/m4.
* src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE.
Instead, include "config.h".
* qemud/qemud.c: Remove definition of _GNU_SOURCE.
* src/openvz_driver.c: Likewise.
* src/qemu_driver.c: Likewise.
* src/remote_internal.c: Likewise.
* configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch
of gettextize-generated files go into build-aux/, rather than in
the top-level directory.
* .cvsignore: Adjust.
* build-aux/.cvsignore: New file.
Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
gl_EARLY
gl_INIT
AM_PROG_CC_STDC
2010-03-15 01:02:10 +00:00
AC_TYPE_UID_T
Use gnulib, starting with its physmem and getaddrinfo modules.
New files go into these directories:
gnulib/lib
gnulib/m4
gnulib/tests
* bootstrap: A wrapper around gnulib-tool.
* configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY
before any macro that uses AC_COMPILE_IFELSE.
(AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile.
* Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests
early enough that those tests run before any libvirt unit tests.
* m4/Makefile.am: Remove file. Not needed.
* src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la.
* src/nodeinfo.c: Include "physmem.h".
* qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h".
(MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions.
(virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate.
* tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS): Add ../gnulib/lib/libgnu.la.
* qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la.
* tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total
memory from a file.
Update expected output not to include "Memory: NNNN"
* tests/nodeinfodata/linux-nodeinfo-1.txt:
* tests/nodeinfodata/linux-nodeinfo-2.txt:
* tests/nodeinfodata/linux-nodeinfo-3.txt:
* tests/nodeinfodata/linux-nodeinfo-4.txt:
* tests/nodeinfodata/linux-nodeinfo-5.txt:
* tests/nodeinfodata/linux-nodeinfo-6.txt:
* src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that
would conflict with the one now in "config.h".
* autogen.sh: Add -I gnulib/m4.
* src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE.
Instead, include "config.h".
* qemud/qemud.c: Remove definition of _GNU_SOURCE.
* src/openvz_driver.c: Likewise.
* src/qemu_driver.c: Likewise.
* src/remote_internal.c: Likewise.
* configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch
of gettextize-generated files go into build-aux/, rather than in
the top-level directory.
* .cvsignore: Adjust.
* build-aux/.cvsignore: New file.
Author: Jim Meyering <meyering@redhat.com>
2007-12-05 21:31:07 +00:00
2005-11-02 13:19:10 +00:00
dnl Make sure we have an ANSI compiler
AM_C_PROTOTYPES
2008-05-22 15:34:02 +00:00
test "x$U" != "x" && AC_MSG_ERROR([Compiler not ANSI compliant])
2005-11-02 13:19:10 +00:00
2007-11-29 17:41:57 +00:00
dnl Support building Win32 DLLs (must appear *before* AM_PROG_LIBTOOL)
AC_LIBTOOL_WIN32_DLL
2005-11-02 13:19:10 +00:00
AM_PROG_LIBTOOL
2007-03-15 17:24:56 +00:00
AM_PROG_CC_C_O
2010-04-27 07:43:55 +00:00
AM_PROG_LD
2007-03-15 17:24:56 +00:00
2008-12-17 21:39:41 +00:00
VERSION_SCRIPT_FLAGS=-Wl,--version-script=
2010-04-27 07:43:55 +00:00
`$LD --help 2>&1 | grep -- --version-script >/dev/null` || \
2008-12-17 21:39:41 +00:00
VERSION_SCRIPT_FLAGS="-Wl,-M -Wl,"
2008-05-22 15:34:02 +00:00
LIBVIRT_COMPILE_WARNINGS([maximum])
2007-03-01 16:18:55 +00:00
Adds CPU selection infrastructure
Each driver supporting CPU selection must fill in host CPU capabilities.
When filling them, drivers for hypervisors running on the same node as
libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers,
such as VMware, need to implement their own way of getting such data.
Raw data can be decoded into virCPUDefPtr using cpuDecode() function.
When implementing virConnectCompareCPU(), a hypervisor driver can just
call cpuCompareXML() function with host CPU capabilities.
For each guest for which a driver supports selecting CPU models, it must
set the appropriate feature in guest's capabilities:
virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0)
Actions needed when a domain is being created depend on whether the
hypervisor understands raw CPU data (currently CPUID for i686, x86_64
architectures) or symbolic names has to be used.
Typical use by hypervisors which prefer CPUID (such as VMware and Xen):
- convert guest CPU configuration from domain's XML into a set of raw
data structures each representing one of the feature policies:
cpuEncode(conn, architecture, guest_cpu_config,
&forced_data, &required_data, &optional_data,
&disabled_data, &forbidden_data)
- create a mask or whatever the hypervisor expects to see and pass it
to the hypervisor
Typical use by hypervisors with symbolic model names (such as QEMU):
- get raw CPU data for a computed guest CPU:
cpuGuestData(conn, host_cpu, guest_cpu_config, &data)
- decode raw data into virCPUDefPtr with a possible restriction on
allowed model names:
cpuDecode(conn, guest, data, n_allowed_models, allowed_models)
- pass guest->model and guest->features to the hypervisor
* src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c
src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h
src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h
* configure.in: check for CPUID instruction
* src/Makefile.am: glue the new files in
* src/libvirt_private.syms: add new private symbols
* po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
AC_MSG_CHECKING([for CPUID instruction])
AC_COMPILE_IFELSE(AC_LANG_PROGRAM(
[[
#include <stdint.h>
]],
[[
uint32_t eax, ebx, ecx, edx;
asm volatile (
"cpuid"
: "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
: "a" (eax));
]]),
[have_cpuid=yes],
[have_cpuid=no])
if test "x$have_cpuid" = xyes; then
AC_DEFINE_UNQUOTED([HAVE_CPUID], 1, [whether CPUID instruction is supported])
fi
AC_MSG_RESULT([$have_cpuid])
2007-06-15 15:24:20 +00:00
dnl Availability of various common functions (non-fatal if missing).
2010-04-29 03:06:46 +00:00
AC_CHECK_FUNCS_ONCE([cfmakeraw regexec sched_getaffinity getuid getgid \
2010-04-29 02:39:11 +00:00
posix_fallocate mmap])
2007-06-15 15:24:20 +00:00
2009-01-20 17:13:33 +00:00
dnl Availability of various not common threadsafe functions
2010-04-29 03:26:57 +00:00
AC_CHECK_FUNCS_ONCE([strerror_r getmntent_r getgrnam_r getpwuid_r])
2010-04-29 02:39:11 +00:00
dnl Availability of pthread functions (if missing, win32 threading is
dnl assumed). Because of $LIB_PTHREAD, we cannot use AC_CHECK_FUNCS_ONCE.
dnl LIB_PTHREAD was set during gl_INIT by gnulib.
old_LIBS=$LIBS
LIBS="$LIBS $LIB_PTHREAD"
AC_CHECK_FUNCS([pthread_sigmask pthread_mutexattr_init])
LIBS=$old_libs
2009-01-20 17:13:33 +00:00
2007-06-15 15:24:20 +00:00
dnl Availability of various common headers (non-fatal if missing).
2010-04-29 03:06:46 +00:00
AC_CHECK_HEADERS([pwd.h paths.h regex.h sys/syslimits.h \
2010-05-17 14:17:08 +00:00
termios.h sys/poll.h syslog.h mntent.h net/ethernet.h linux/magic.h])
2007-06-15 15:24:20 +00:00
2008-01-23 14:54:41 +00:00
dnl Where are the XDR functions?
dnl If portablexdr is installed, prefer that.
2009-01-08 20:42:01 +00:00
dnl Otherwise try -lrpc (Cygwin) -lxdr (some MinGW), -lnsl (Solaris)
dnl or none (most Unix)
2008-01-23 14:54:41 +00:00
AC_CHECK_LIB([portablexdr],[xdrmem_create],[],[
2009-12-21 17:37:15 +00:00
AC_SEARCH_LIBS([xdrmem_create],[rpc xdr nsl],[],
[AC_MSG_ERROR([Cannot find a XDR library])])
2008-01-23 14:54:41 +00:00
])
2007-11-26 11:43:01 +00:00
2010-04-25 11:31:31 +00:00
dnl check for cygwin's variation in xdr function names
AC_CHECK_FUNCS([xdr_u_int64_t],[],[],[#include <rpc/xdr.h>])
2008-09-05 12:03:45 +00:00
AC_CHECK_LIB([intl],[gettext],[])
2007-11-26 11:45:26 +00:00
dnl Do we have rpcgen?
2008-05-22 15:34:02 +00:00
AC_PATH_PROG([RPCGEN], [rpcgen], [no])
2009-01-28 21:33:56 +00:00
AM_CONDITIONAL([HAVE_RPCGEN], [test "x$ac_cv_path_RPCGEN" != "xno"])
2007-12-04 19:14:11 +00:00
dnl Is this GLIBC's buggy rpcgen?
2009-01-28 21:33:56 +00:00
AM_CONDITIONAL([HAVE_GLIBC_RPCGEN],
2007-12-04 19:14:11 +00:00
[test "x$ac_cv_path_RPCGEN" != "xno" &&
$ac_cv_path_RPCGEN -t </dev/null >/dev/null 2>&1])
2007-11-26 11:45:26 +00:00
2007-11-29 17:41:57 +00:00
dnl Miscellaneous external programs.
2008-05-22 15:34:02 +00:00
AC_PATH_PROG([RM], [rm], [/bin/rm])
AC_PATH_PROG([MV], [mv], [/bin/mv])
AC_PATH_PROG([TAR], [tar], [/bin/tar])
AC_PATH_PROG([XMLLINT], [xmllint], [/usr/bin/xmllint])
2008-08-20 13:16:29 +00:00
AC_PATH_PROG([XMLCATALOG], [xmlcatalog], [/usr/bin/xmlcatalog])
2008-05-22 15:34:02 +00:00
AC_PATH_PROG([XSLTPROC], [xsltproc], [/usr/bin/xsltproc])
2008-09-04 10:44:23 +00:00
AC_PATH_PROG([AUGPARSE], [augparse], [/usr/bin/augparse])
2008-06-10 10:43:28 +00:00
AC_PROG_MKDIR_P
2007-11-29 17:41:57 +00:00
dnl External programs that we can use if they are available.
dnl We will hard-code paths to these programs unless we cannot
dnl detect them, in which case we'll search for the program
dnl along the $PATH at runtime and fail if it's not there.
2008-05-22 15:34:02 +00:00
AC_PATH_PROG([DNSMASQ], [dnsmasq], [dnsmasq],
2007-11-29 17:41:57 +00:00
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
2008-05-22 15:34:02 +00:00
AC_PATH_PROG([BRCTL], [brctl], [brctl],
2007-11-29 17:41:57 +00:00
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
2008-11-28 07:50:20 +00:00
AC_PATH_PROG([UDEVADM], [udevadm], [],
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
2008-12-02 12:41:29 +00:00
AC_PATH_PROG([UDEVSETTLE], [udevsettle], [],
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
2009-03-02 16:18:11 +00:00
AC_PATH_PROG([MODPROBE], [modprobe], [],
[/sbin:/usr/sbin:/usr/local/sbin:$PATH])
2007-11-29 17:41:57 +00:00
AC_DEFINE_UNQUOTED([DNSMASQ],["$DNSMASQ"],
[Location or name of the dnsmasq program])
AC_DEFINE_UNQUOTED([BRCTL],["$BRCTL"],
[Location or name of the brctl program (see bridge-utils)])
2008-11-28 07:50:20 +00:00
if test -n "$UDEVADM"; then
AC_DEFINE_UNQUOTED([UDEVADM],["$UDEVADM"],
[Location or name of the udevadm program])
fi
2008-12-02 12:41:29 +00:00
if test -n "$UDEVSETTLE"; then
AC_DEFINE_UNQUOTED([UDEVSETTLE],["$UDEVSETTLE"],
[Location or name of the udevsettle program])
fi
2009-03-02 16:18:11 +00:00
if test -n "$MODPROBE"; then
AC_DEFINE_UNQUOTED([MODPROBE],["$MODPROBE"],
[Location or name of the modprobe program])
fi
2007-11-29 17:41:57 +00:00
2005-12-07 13:45:20 +00:00
dnl Specific dir for HTML output ?
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([html-dir], [AC_HELP_STRING([--with-html-dir=path],
[path to base html directory, default $datadir/doc/html])],
2005-12-07 13:45:20 +00:00
[HTML_DIR=$withval], [HTML_DIR='$(datadir)/doc'])
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([html-subdir], [AC_HELP_STRING([--with-html-subdir=path],
[directory used under html-dir, default $PACKAGE-$VERSION/html])],
2005-12-07 13:45:20 +00:00
[test "x$withval" != "x" && HTML_DIR="$HTML_DIR/$withval"],
[HTML_DIR="$HTML_DIR/\$(PACKAGE)-\$(VERSION)/html"])
2008-05-22 15:34:02 +00:00
AC_SUBST([HTML_DIR])
2005-12-07 13:45:20 +00:00
2007-11-27 14:39:42 +00:00
dnl if --prefix is /usr, don't use /usr/var for localstatedir
dnl or /usr/etc for sysconfdir
dnl as this makes a lot of things break in testing situations
2010-03-24 08:10:13 +00:00
if test "$prefix" = "/usr" && test "$localstatedir" = '${prefix}/var' ; then
2007-11-27 14:39:42 +00:00
localstatedir='/var'
fi
2010-03-24 08:10:13 +00:00
if test "$prefix" = "/usr" && test "$sysconfdir" = '${prefix}/etc' ; then
2007-11-27 14:39:42 +00:00
sysconfdir='/etc'
fi
2010-04-27 08:11:21 +00:00
dnl lxc and qemu drivers require linux headers
2010-05-03 23:41:55 +00:00
case "$host" in
*-*-linux*)
# match linux here so the *) case will match anything non-linux
;;
*)
2010-04-27 08:11:21 +00:00
if test "x$with_lxc" != "xyes"
then
with_lxc=no
fi
if test "x$with_qemu" != "xyes"
then
with_qemu=no
fi
2010-05-03 23:41:55 +00:00
;;
esac
2007-11-27 14:39:42 +00:00
2007-06-11 12:19:46 +00:00
dnl Allow to build without Xen, QEMU/KVM, test or remote driver
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([xen],
2010-01-17 14:48:46 +00:00
AC_HELP_STRING([--with-xen], [add XEN support @<:@default=check@:>@]),[],[with_xen=check])
2008-11-25 10:44:52 +00:00
AC_ARG_WITH([xen-inotify],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-xen-inotify], [add XEN inotify support @<:@default=check@:>@]),[],[with_xen_inotify=check])
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([qemu],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-qemu], [add QEMU/KVM support @<:@default=yes@:>@]),[],[with_qemu=yes])
2008-11-19 16:58:23 +00:00
AC_ARG_WITH([uml],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-uml], [add UML support @<:@default=check@:>@]),[],[with_uml=check])
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([openvz],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-openvz], [add OpenVZ support @<:@default=yes@:>@]),[],[with_openvz=yes])
2009-09-04 10:08:47 +00:00
AC_ARG_WITH([libssh2],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-libssh2=@<:@PFX@:>@], [libssh2 location @<:@default=/usr/local/lib@:>@]),[],[with_libssh2=yes])
2009-07-24 14:17:06 +00:00
AC_ARG_WITH([phyp],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-phyp], [add PHYP support @<:@default=check@:>@]),[],[with_phyp=check])
2010-03-14 11:11:51 +00:00
AC_ARG_WITH([xenapi],
AC_HELP_STRING([--with-xenapi], [add XenAPI support @<:@default=check@:>@]),[],[with_xenapi=check])
2009-04-17 16:09:07 +00:00
AC_ARG_WITH([vbox],
2010-06-29 18:01:45 +00:00
AC_HELP_STRING([--with-vbox=@<:@PFX@:>@],
[VirtualBox XPCOMC location @<:@default=check@:>@]),[],
[with_vbox=check])
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([lxc],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-lxc], [add Linux Container support @<:@default=check@:>@]),[],[with_lxc=check])
2009-05-25 11:56:00 +00:00
AC_ARG_WITH([one],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-one], [add ONE support @<:@default=check@:>@]),[],[with_one=check])
2009-07-23 20:21:08 +00:00
AC_ARG_WITH([esx],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-esx], [add ESX support @<:@default=check@:>@]),[],[with_esx=check])
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([test],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-test], [add test driver support @<:@default=yes@:>@]),[],[with_test=yes])
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([remote],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-remote], [add remote driver support @<:@default=yes@:>@]),[],[with_remote=yes])
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([libvirtd],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-libvirtd], [add libvirtd support @<:@default=yes@:>@]),[],[with_libvirtd=yes])
2007-03-15 07:43:16 +00:00
2005-12-02 12:11:06 +00:00
dnl
dnl specific tests to setup DV devel environments with debug etc ...
dnl
2010-03-31 20:58:40 +00:00
if test "${LOGNAME}" = "veillard" && test "`pwd`" = "/u/veillard/libvirt" ; then
2005-12-02 12:11:06 +00:00
STATIC_BINARIES="-static"
else
STATIC_BINARIES=
fi
2008-05-22 15:34:02 +00:00
AC_SUBST([STATIC_BINARIES])
2005-12-02 12:11:06 +00:00
2007-02-16 18:30:55 +00:00
dnl --enable-debug=(yes|no)
2008-05-22 15:34:02 +00:00
AC_ARG_ENABLE([debug],
2010-01-17 14:48:45 +00:00
[AC_HELP_STRING([--enable-debug=@<:@no|yes@:>@],
[enable debugging output @<:@default=yes@:>@])],[],[enable_debug=yes])
2009-01-05 14:05:29 +00:00
AM_CONDITIONAL([ENABLE_DEBUG], test x"$enable_debug" = x"yes")
2007-02-16 18:30:55 +00:00
if test x"$enable_debug" = x"yes"; then
2008-05-22 15:34:02 +00:00
AC_DEFINE([ENABLE_DEBUG], [], [whether debugging is enabled])
2007-02-16 18:30:55 +00:00
fi
2007-08-07 13:02:35 +00:00
2007-06-11 12:19:46 +00:00
AC_MSG_CHECKING([where to write libvirtd PID file])
2010-01-17 14:48:45 +00:00
AC_ARG_WITH([remote-pid-file], [AC_HELP_STRING([--with-remote-pid-file=@<:@pidfile|none@:>@], [PID file for libvirtd])])
2007-06-11 12:19:46 +00:00
if test "x$with_remote_pid_file" == "x" ; then
REMOTE_PID_FILE="$localstatedir/run/libvirtd.pid"
elif test "x$with_remote_pid_file" == "xnone" ; then
REMOTE_PID_FILE=""
else
REMOTE_PID_FILE="$with_remote_pid_file"
fi
2008-05-22 15:34:02 +00:00
AC_SUBST([REMOTE_PID_FILE])
2007-06-11 12:19:46 +00:00
AC_MSG_RESULT($REMOTE_PID_FILE)
2007-02-23 12:50:58 +00:00
dnl
dnl init script flavor
dnl
AC_MSG_CHECKING([for init script flavor])
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([init-script],
2010-01-17 14:48:45 +00:00
[AC_HELP_STRING([--with-init-script=@<:@redhat|auto|none@:>@],
[Style of init script to install @<:@default=auto@:>@])])
2010-03-24 21:31:31 +00:00
if test "x$with_init_script" = "x" || test "x$with_init_script" = "xauto"; then
2007-02-23 12:50:58 +00:00
if test -f /etc/redhat-release ; then
2009-11-02 16:55:40 +00:00
with_init_script=redhat
2007-02-23 12:50:58 +00:00
else
2009-11-02 16:55:40 +00:00
with_init_script=none
2007-02-23 12:50:58 +00:00
fi
fi
2009-11-02 16:55:40 +00:00
AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_RED_HAT], test x$with_init_script = xredhat)
AC_MSG_RESULT($with_init_script)
2007-02-23 12:50:58 +00:00
2009-01-19 17:41:39 +00:00
dnl RHEL-5 has a peculiar version of Xen, which requires some special casing
AC_ARG_WITH([rhel5-api],
2010-01-17 14:48:45 +00:00
[AC_HELP_STRING([--with-rhel5-api=@<:@ARG@:>@],
[build for the RHEL-5 API @<:@default=no@:>@])])
2009-01-19 17:41:39 +00:00
if test x"$with_rhel5_api" = x"yes"; then
AC_DEFINE([WITH_RHEL5_API], [1], [whether building for the RHEL-5 API])
fi
2008-05-22 15:34:02 +00:00
AC_PATH_PROG([IPTABLES_PATH], [iptables], /sbin/iptables, [/usr/sbin:$PATH])
AC_DEFINE_UNQUOTED([IPTABLES_PATH], "$IPTABLES_PATH", [path to iptables binary])
2007-02-14 16:26:42 +00:00
2009-11-03 22:11:01 +00:00
AC_PATH_PROG([EBTABLES_PATH], [ebtables], /sbin/ebtables, [/usr/sbin:$PATH])
AC_DEFINE_UNQUOTED([EBTABLES_PATH], "$EBTABLES_PATH", [path to ebtables binary])
2010-03-25 17:46:12 +00:00
2008-08-20 20:48:35 +00:00
if test "$with_openvz" = "yes"; then
2008-11-04 23:37:23 +00:00
AC_DEFINE_UNQUOTED([WITH_OPENVZ], 1, [whether OpenVZ driver is enabled])
2007-07-17 13:27:26 +00:00
fi
2008-08-20 20:48:35 +00:00
AM_CONDITIONAL([WITH_OPENVZ], [test "$with_openvz" = "yes"])
2010-06-29 18:01:45 +00:00
dnl
dnl check for VirtualBox XPCOMC location
dnl
vbox_xpcomc_dir=
if test "x$with_vbox" = "xyes" || test "x$with_vbox" = "xcheck"; then
AC_MSG_CHECKING([for VirtualBox XPCOMC location])
for vbox in \
/usr/lib/virtualbox/VBoxXPCOMC.so \
/usr/lib/VirtualBox/VBoxXPCOMC.so \
/opt/virtualbox/VBoxXPCOMC.so \
/opt/VirtualBox/VBoxXPCOMC.so \
/opt/virtualbox/i386/VBoxXPCOMC.so \
/opt/VirtualBox/i386/VBoxXPCOMC.so \
/opt/virtualbox/amd64/VBoxXPCOMC.so \
/opt/VirtualBox/amd64/VBoxXPCOMC.so \
/usr/local/lib/virtualbox/VBoxXPCOMC.so \
/usr/local/lib/VirtualBox/VBoxXPCOMC.so \
/Application/VirtualBox.app/Contents/MacOS/VBoxXPCOMC.dylib \
; do
if test -f "$vbox"; then
vbox_xpcomc_dir=`AS_DIRNAME(["$vbox"])`
break
fi
done
if test -n "$vbox_xpcomc_dir"; then
AC_MSG_RESULT([$vbox_xpcomc_dir])
with_vbox=yes
else
if test "x$with_vbox" = "xcheck"; then
AC_MSG_RESULT([not found, disabling VirtualBox driver])
with_vbox=no
else
AC_MSG_RESULT([not found])
AC_MSG_ERROR([VirtualBox XPCOMC is required for the VirtualBox driver])
fi
fi
else
if test "x$with_vbox" != "xno"; then
if test -f ${with_vbox}/VBoxXPCOMC.so || \
test -f ${with_vbox}/VBoxXPCOMC.dylib; then
vbox_xpcomc_dir=$with_vbox
with_vbox=yes
else
AC_MSG_ERROR([$with_vbox does not contain VirtualBox XPCOMC])
fi
fi
fi
AC_DEFINE_UNQUOTED([VBOX_XPCOMC_DIR], ["$vbox_xpcomc_dir"],
[Location of directory containing VirtualBox XPCOMC library])
2009-04-17 16:09:07 +00:00
if test "x$with_vbox" = "xyes"; then
2010-03-04 15:48:10 +00:00
AC_SEARCH_LIBS([dlopen], [dl], [], [AC_MSG_ERROR([Unable to find dlopen()])])
case $ac_cv_search_dlopen in
no*) DLOPEN_LIBS= ;;
*) DLOPEN_LIBS=$ac_cv_search_dlopen ;;
esac
AC_SUBST([DLOPEN_LIBS])
2009-04-17 16:09:07 +00:00
AC_DEFINE_UNQUOTED([WITH_VBOX], 1, [whether VirtualBox driver is enabled])
fi
AM_CONDITIONAL([WITH_VBOX], [test "$with_vbox" = "yes"])
2008-11-04 23:37:23 +00:00
if test "$with_libvirtd" = "no" ; then
with_qemu=no
fi
2007-09-18 23:36:30 +00:00
if test "$with_qemu" = "yes" ; then
2008-11-04 23:37:23 +00:00
AC_DEFINE_UNQUOTED([WITH_QEMU], 1, [whether QEMU driver is enabled])
2007-03-15 07:43:16 +00:00
fi
2008-08-20 20:48:35 +00:00
AM_CONDITIONAL([WITH_QEMU], [test "$with_qemu" = "yes"])
2007-03-15 07:43:16 +00:00
2009-05-25 11:56:00 +00:00
if test "$with_one" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_ONE],1,[whether ONE driver is enabled])
fi
AM_CONDITIONAL([WITH_ONE],[test "$with_one" = "yes"])
2007-09-18 23:36:30 +00:00
if test "$with_test" = "yes" ; then
2008-11-04 23:37:23 +00:00
AC_DEFINE_UNQUOTED([WITH_TEST], 1, [whether Test driver is enabled])
2007-03-15 07:43:16 +00:00
fi
2008-08-20 20:48:35 +00:00
AM_CONDITIONAL([WITH_TEST], [test "$with_test" = "yes"])
2007-03-15 07:43:16 +00:00
2007-09-18 23:36:30 +00:00
if test "$with_remote" = "yes" ; then
2008-11-04 23:37:23 +00:00
AC_DEFINE_UNQUOTED([WITH_REMOTE], 1, [whether Remote driver is enabled])
2007-06-11 12:19:46 +00:00
fi
2008-08-20 20:48:35 +00:00
AM_CONDITIONAL([WITH_REMOTE], [test "$with_remote" = "yes"])
2007-06-11 12:19:46 +00:00
2008-06-10 15:35:15 +00:00
if test "$with_libvirtd" = "yes" ; then
2008-11-04 23:37:23 +00:00
AC_DEFINE_UNQUOTED([WITH_LIBVIRTD], 1, [whether libvirtd daemon is enabled])
2008-06-10 15:35:15 +00:00
fi
2008-08-20 20:48:35 +00:00
AM_CONDITIONAL([WITH_LIBVIRTD], [test "$with_libvirtd" = "yes"])
2008-06-10 15:35:15 +00:00
2010-03-14 11:11:51 +00:00
old_LIBS="$LIBS"
old_CFLAGS="$CFLAGS"
LIBXENSERVER_LIBS=""
LIBXENSERVER_CFLAGS=""
dnl search for the XenServer library
if test "$with_xenapi" != "no" ; then
2010-03-24 08:10:13 +00:00
if test "$with_xenapi" != "yes" && test "$with_xenapi" != "check" ; then
2010-03-14 11:11:51 +00:00
LIBXENSERVER_CFLAGS="-I$with_xenapi/include"
LIBXENSERVER_LIBS="-L$with_xenapi"
fi
fail=0
CFLAGS="$CFLAGS $LIBXENSERVER_CFLAGS"
LIBS="$LIBS $LIBXENSERVER_LIBS"
AC_CHECK_LIB([xenserver], [xen_vm_start], [
with_xenapi=yes
LIBXENSERVER_LIBS="$LIBXENSERVER_LIBS -lxenserver"
],[
if test "$with_xenapi" = "yes"; then
fail=1
fi
with_xenapi=no
])
fi
LIBS="$old_LIBS"
CFLAGS="$old_CFLAGS"
if test $fail = 1; then
AC_MSG_ERROR([You must install the XenServer Library to compile XenAPI driver with -lxenserver])
fi
if test "$with_xenapi" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_XENAPI], 1, [whether XenAPI driver is enabled])
fi
AC_SUBST([LIBXENSERVER_CFLAGS])
AC_SUBST([LIBXENSERVER_LIBS])
2010-01-17 14:48:46 +00:00
old_LIBS="$LIBS"
old_CFLAGS="$CFLAGS"
2008-11-04 23:37:23 +00:00
XEN_LIBS=""
XEN_CFLAGS=""
dnl search for the Xen store library
if test "$with_xen" != "no" ; then
2010-03-24 08:10:13 +00:00
if test "$with_xen" != "yes" && test "$with_xen" != "check" ; then
2008-11-04 23:37:23 +00:00
XEN_CFLAGS="-I$with_xen/include"
XEN_LIBS="-L$with_xen/lib64 -L$with_xen/lib"
2007-03-15 07:43:16 +00:00
fi
2008-11-04 23:37:23 +00:00
fail=0
CFLAGS="$CFLAGS $XEN_CFLAGS"
LIBS="$LIBS $XEN_LIBS"
AC_CHECK_LIB([xenstore], [xs_read], [
with_xen=yes
XEN_LIBS="$XEN_LIBS -lxenstore"
],[
2010-01-17 14:48:46 +00:00
if test "$with_xen" = "yes"; then
2008-11-04 23:37:23 +00:00
fail=1
fi
2010-01-17 14:48:46 +00:00
with_xen=no
2008-11-04 23:37:23 +00:00
])
2010-01-17 14:48:46 +00:00
fi
2008-11-04 23:37:23 +00:00
2010-01-17 14:48:46 +00:00
if test "$with_xen" != "no" ; then
2008-05-22 15:34:02 +00:00
AC_CHECK_HEADERS([xen/xen.h xen/version.h xen/dom0_ops.h],,[
2010-01-17 14:48:46 +00:00
if test "$with_xen" = "yes"; then
fail=1
fi
with_xen=no
2007-07-19 15:37:54 +00:00
],
[#include <stdio.h>
#include <stdint.h>
])
2010-01-17 14:48:46 +00:00
fi
2007-07-19 15:37:54 +00:00
2010-01-17 14:48:46 +00:00
if test "$with_xen" != "no" ; then
2007-07-19 15:37:54 +00:00
dnl Search for the location of <xen/{linux,sys}/privcmd.h>.
2010-01-17 14:48:46 +00:00
found=
AC_CHECK_HEADERS([xen/sys/privcmd.h xen/linux/privcmd.h], [found=yes; break;], [],
[#include <stdio.h>
#include <stdint.h>
#include <xen/xen.h>
])
if test "x$found" != "xyes"; then
if test "$with_xen" = "yes"; then
fail=1
fi
with_xen=no
fi
2007-03-15 07:43:16 +00:00
fi
2010-01-17 14:48:46 +00:00
LIBS="$old_LIBS"
CFLAGS="$old_CFLAGS"
if test $fail = 1; then
AC_MSG_ERROR([You must install the Xen development package to compile Xen driver with -lxenstore])
fi
2008-11-04 23:37:23 +00:00
if test "$with_xen" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_XEN], 1, [whether Xen driver is enabled])
fi
2010-01-17 14:48:46 +00:00
2008-11-04 23:37:23 +00:00
AM_CONDITIONAL([WITH_XEN], [test "$with_xen" = "yes"])
AC_SUBST([XEN_CFLAGS])
AC_SUBST([XEN_LIBS])
2005-11-02 13:19:10 +00:00
2008-11-25 10:44:52 +00:00
dnl
dnl check for kernel headers required by xen_inotify
dnl
if test "$with_xen" != "yes"; then
with_xen_inotify=no
fi
if test "$with_xen_inotify" != "no"; then
2009-08-05 08:57:40 +00:00
AC_CHECK_HEADER([sys/inotify.h], [
with_xen_inotify=yes
], [
if test "$with_xen_inotify" = "check"; then
with_xen_inotify=no
AC_MSG_NOTICE([Header file <sys/inotify.h> is required for Xen Inotify support, disabling it])
else
AC_MSG_ERROR([Header file <sys/inotify.h> is required for Xen Inotify support!])
fi
0])
2008-11-25 10:44:52 +00:00
fi
if test "$with_xen_inotify" = "yes"; then
AC_DEFINE_UNQUOTED([WITH_XEN_INOTIFY], 1,[whether Xen inotify sub-driver is enabled])
fi
AM_CONDITIONAL([WITH_XEN_INOTIFY], [test "$with_xen_inotify" = "yes"])
2008-09-17 14:07:49 +00:00
dnl
dnl check for kvm headers
2008-09-18 08:54:23 +00:00
dnl
2008-09-17 14:07:49 +00:00
AC_CHECK_HEADERS([linux/kvm.h])
2009-08-05 08:52:14 +00:00
dnl
dnl check for sufficient headers for LXC
dnl
2010-04-23 16:00:19 +00:00
if test "$with_libvirtd" = "no" ; then
with_lxc=no
fi
2010-03-24 21:31:31 +00:00
if test "$with_lxc" = "yes" || test "$with_lxc" = "check"; then
2010-05-04 23:18:28 +00:00
AC_TRY_LINK([#define _GNU_SOURCE
#include <sched.h>
], [
unshare (1);
], [
with_lxc=yes
], [
2009-08-05 08:52:14 +00:00
if test "$with_lxc" = "check"; then
with_lxc=no
2010-05-04 23:18:28 +00:00
AC_MSG_NOTICE([Function unshare() not present in <sched.h> header but required for LXC driver, disabling it])
2009-08-05 08:52:14 +00:00
else
2010-05-04 23:18:28 +00:00
AC_MSG_ERROR([Function unshare() not present in <sched.h> header, but required for LXC driver])
2009-08-05 08:52:14 +00:00
fi
])
fi
2009-08-05 10:59:58 +00:00
if test "$with_lxc" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_LXC], 1, [whether LXC driver is enabled])
fi
AM_CONDITIONAL([WITH_LXC], [test "$with_lxc" = "yes"])
dnl
dnl check for kernel headers required by src/bridge.c
dnl
2010-03-24 21:31:31 +00:00
if test "$with_qemu" = "yes" || test "$with_lxc" = "yes" ; then
2009-08-05 10:59:58 +00:00
AC_CHECK_HEADERS([linux/param.h linux/sockios.h linux/if_bridge.h linux/if_tun.h],,
2010-04-23 09:40:13 +00:00
AC_MSG_ERROR([You must install kernel-headers in order to compile libvirt with QEMU or LXC support]))
2009-08-05 10:59:58 +00:00
fi
2009-08-05 08:52:14 +00:00
2009-09-10 13:21:10 +00:00
dnl Need to test if pkg-config exists
PKG_PROG_PKG_CONFIG
2009-05-25 11:56:00 +00:00
dnl OpenNebula driver Compilation setting
dnl
2010-04-23 16:00:19 +00:00
if test "$with_libvirtd" = "no" ; then
with_one=no
fi
2009-06-24 17:32:56 +00:00
XMLRPC_CFLAGS=
XMLRPC_LIBS=
2010-03-24 21:31:31 +00:00
if test "x$with_one" = "xyes" || test "x$with_one" = "xcheck"; then
2009-06-24 17:32:56 +00:00
PKG_CHECK_MODULES(XMLRPC, xmlrpc_client >= $XMLRPC_REQUIRED,
[with_one=yes], [
if test "x$with_one" = "xcheck" ; then
with_one=no
else
AC_MSG_ERROR(
[You must install XMLRPC-C >= $XMLRPC_REQUIRED to compile libvirt ONE driver])
fi
])
if test "x$with_one" = "xyes" ; then
AC_DEFINE_UNQUOTED([HAVE_XMLRPC], 1,
[whether One is used to broadcast server presence])
fi
2009-05-25 11:56:00 +00:00
fi
2009-06-24 17:32:56 +00:00
AM_CONDITIONAL([HAVE_XMLRPC], [test "x$with_one" = "xyes"])
AM_CONDITIONAL([WITH_ONE], [test "x$with_one" = "xyes"])
AC_SUBST([XMLRPC_CFLAGS])
AC_SUBST([XMLRPC_LIBS])
2009-05-25 11:56:00 +00:00
2006-02-16 22:50:52 +00:00
dnl ==========================================================================
dnl find libxml2 library, borrowed from xmlsec
dnl ==========================================================================
LIBXML_CONFIG="xml2-config"
LIBXML_CFLAGS=""
LIBXML_LIBS=""
LIBXML_FOUND="no"
2007-09-19 15:35:00 +00:00
2010-01-17 14:48:45 +00:00
AC_ARG_WITH([libxml], AC_HELP_STRING([--with-libxml=@<:@PFX@:>@], [libxml2 location]))
2008-01-22 21:30:05 +00:00
if test "x$with_libxml" = "xno" ; then
2007-12-05 23:02:13 +00:00
AC_MSG_CHECKING(for libxml2 libraries >= $LIBXML_REQUIRED)
2008-05-22 15:34:02 +00:00
AC_MSG_ERROR([libxml2 >= $LIBXML_REQUIRED is required for libvirt])
2010-03-24 08:10:13 +00:00
elif test "x$with_libxml" = "x" && test "x$PKG_CONFIG" != "x" ; then
2008-01-22 21:30:05 +00:00
PKG_CHECK_MODULES(LIBXML, libxml-2.0 >= $LIBXML_REQUIRED, [LIBXML_FOUND=yes], [LIBXML_FOUND=no])
2006-02-16 22:50:52 +00:00
fi
2008-01-22 21:30:05 +00:00
if test "$LIBXML_FOUND" = "no" ; then
if test "x$with_libxml" != "x" ; then
2006-02-16 22:50:52 +00:00
LIBXML_CONFIG=$with_libxml/bin/$LIBXML_CONFIG
fi
2007-09-19 15:35:00 +00:00
AC_MSG_CHECKING(libxml2 $LIBXML_CONFIG >= $LIBXML_REQUIRED )
2006-02-16 22:50:52 +00:00
if ! $LIBXML_CONFIG --version > /dev/null 2>&1 ; then
2008-05-22 15:34:02 +00:00
AC_MSG_ERROR([Could not find libxml2 anywhere (see config.log for details).])
2006-02-16 22:50:52 +00:00
fi
vers=`$LIBXML_CONFIG --version | awk -F. '{ printf "%d", ($1 * 1000 + $2) * 1000 + $3;}'`
2007-09-19 15:35:00 +00:00
minvers=`echo $LIBXML_REQUIRED | awk -F. '{ printf "%d", ($1 * 1000 + $2) * 1000 + $3;}'`
2006-02-16 22:50:52 +00:00
if test "$vers" -ge "$minvers" ; then
LIBXML_LIBS="`$LIBXML_CONFIG --libs`"
LIBXML_CFLAGS="`$LIBXML_CONFIG --cflags`"
LIBXML_FOUND="yes"
2007-09-19 15:35:00 +00:00
AC_MSG_RESULT(yes)
2006-02-16 22:50:52 +00:00
else
2008-01-22 21:30:05 +00:00
AC_MSG_ERROR(
[You need at least libxml2 $LIBXML_REQUIRED for this version of libvirt])
2006-02-16 22:50:52 +00:00
fi
fi
2008-05-22 15:34:02 +00:00
AC_SUBST([LIBXML_CFLAGS])
AC_SUBST([LIBXML_LIBS])
2006-02-16 22:50:52 +00:00
2007-06-11 12:19:46 +00:00
dnl xmlURI structure has query_raw?
old_cflags="$CFLAGS"
2009-12-18 17:34:40 +00:00
old_libs="$LIBS"
2007-06-11 12:19:46 +00:00
CFLAGS="$CFLAGS $LIBXML_CFLAGS"
2009-12-18 17:34:40 +00:00
LIBS="$LIBS $LIBXML_LIBS"
2008-05-22 15:34:02 +00:00
AC_CHECK_MEMBER([struct _xmlURI.query_raw],
[AC_DEFINE([HAVE_XMLURI_QUERY_RAW], [], [Have query_raw field in libxml2 xmlURI structure])],,
2007-06-11 12:19:46 +00:00
[#include <libxml/uri.h>])
CFLAGS="$old_cflags"
2009-12-18 17:34:40 +00:00
LIBS="$old_libs"
2007-06-11 12:19:46 +00:00
dnl GnuTLS library
2007-09-19 17:42:40 +00:00
GNUTLS_CFLAGS=
GNUTLS_LIBS=
2008-01-22 21:30:05 +00:00
GNUTLS_FOUND=no
2009-12-21 17:47:12 +00:00
if test -x "$PKG_CONFIG" ; then
2008-01-22 21:30:05 +00:00
PKG_CHECK_MODULES(GNUTLS, gnutls >= $GNUTLS_REQUIRED,
[GNUTLS_FOUND=yes], [GNUTLS_FOUND=no])
fi
if test "$GNUTLS_FOUND" = "no"; then
2008-05-22 15:40:01 +00:00
fail=0
2007-09-19 17:42:40 +00:00
old_libs="$LIBS"
2008-05-22 15:40:01 +00:00
AC_CHECK_HEADER([gnutls/gnutls.h], [], [fail=1])
AC_CHECK_LIB([gnutls], [gnutls_handshake],[], [fail=1], [-lgcrypt])
test $fail = 1 &&
AC_MSG_ERROR([You must install the GnuTLS library in order to compile and run libvirt])
2009-07-17 19:20:08 +00:00
dnl Not all versions of gnutls include -lgcrypt, and so we add
dnl it explicitly for the calls to gcry_control/check_version
GNUTLS_LIBS="$LIBS -lgcrypt"
2007-09-19 17:42:40 +00:00
LIBS="$old_libs"
2009-12-21 17:47:12 +00:00
else
GNUTLS_LIBS="$GNUTLS_LIBS -lgcrypt"
2007-09-19 17:42:40 +00:00
fi
2008-05-22 15:34:02 +00:00
AC_SUBST([GNUTLS_CFLAGS])
AC_SUBST([GNUTLS_LIBS])
2007-06-11 12:19:46 +00:00
2007-08-07 13:02:35 +00:00
dnl Old versions of GnuTLS uses types like 'gnutls_session' instead
dnl of 'gnutls_session_t'. Try to detect this type if defined so
dnl that we can offer backwards compatibility.
2007-09-19 17:42:40 +00:00
old_cflags="$CFLAGS"
2009-12-18 17:34:40 +00:00
old_libs="$LIBS"
2007-09-19 17:42:40 +00:00
CFLAGS="$CFLAGS $GNUTLS_CFLAGS"
2009-12-18 17:34:40 +00:00
LIBS="$LIBS $GNUTLS_LIBS"
2008-05-22 15:34:02 +00:00
AC_CHECK_TYPE([gnutls_session],
AC_DEFINE([GNUTLS_1_0_COMPAT],[],
2007-08-07 13:02:35 +00:00
[enable GnuTLS 1.0 compatibility macros]),,
[#include <gnutls/gnutls.h>])
2007-09-19 17:42:40 +00:00
CFLAGS="$old_cflags"
2009-12-18 17:34:40 +00:00
LIBS="$old_libs"
2007-08-07 13:02:35 +00:00
2007-09-19 01:56:55 +00:00
2007-12-05 15:24:15 +00:00
dnl Cyrus SASL
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([sasl],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-sasl], [use cyrus SASL for authentication @<:@default=check@:>@]),
2007-12-05 15:24:15 +00:00
[],
2008-01-22 21:30:05 +00:00
[with_sasl=check])
2007-12-05 15:24:15 +00:00
SASL_CFLAGS=
SASL_LIBS=
2008-01-22 21:30:05 +00:00
if test "x$with_sasl" != "xno"; then
2010-03-24 08:10:13 +00:00
if test "x$with_sasl" != "xyes" && test "x$with_sasl" != "xcheck"; then
2007-12-05 15:24:15 +00:00
SASL_CFLAGS="-I$with_sasl"
SASL_LIBS="-L$with_sasl"
fi
2008-05-22 15:40:01 +00:00
fail=0
2007-12-05 15:24:15 +00:00
old_cflags="$CFLAGS"
old_libs="$LIBS"
CFLAGS="$CFLAGS $SASL_CFLAGS"
LIBS="$LIBS $SASL_LIBS"
2008-01-22 21:30:05 +00:00
AC_CHECK_HEADER([sasl/sasl.h],[],[
2009-12-21 17:58:09 +00:00
if test "x$with_sasl" = "xcheck" ; then
2008-01-22 21:30:05 +00:00
with_sasl=no
else
2008-05-22 15:40:01 +00:00
fail=1
2008-01-22 21:30:05 +00:00
fi])
if test "x$with_sasl" != "xno" ; then
2009-04-01 10:40:38 +00:00
AC_CHECK_LIB([sasl2], [sasl_client_init],[
SASL_LIBS="$SASL_LIBS -lsasl2"
with_sasl=yes
],[
AC_CHECK_LIB([sasl], [sasl_client_init],[
SASL_LIBS="$SASL_LIBS -lsasl"
with_sasl=yes
],[
if test "x$with_sasl" = "xcheck" ; then
2008-01-22 21:30:05 +00:00
with_sasl=no
2009-04-01 10:40:38 +00:00
else
2008-05-22 15:40:01 +00:00
fail=1
2009-04-01 10:40:38 +00:00
fi
])
])
2008-01-22 21:30:05 +00:00
fi
2008-05-22 15:40:01 +00:00
test $fail = 1 &&
AC_MSG_ERROR([You must install the Cyrus SASL development package in order to compile libvirt])
2007-12-05 15:24:15 +00:00
CFLAGS="$old_cflags"
LIBS="$old_libs"
2008-01-22 21:30:05 +00:00
if test "x$with_sasl" = "xyes" ; then
2008-05-22 15:34:02 +00:00
AC_DEFINE_UNQUOTED([HAVE_SASL], 1,
2008-01-22 21:30:05 +00:00
[whether Cyrus SASL is available for authentication])
fi
2007-12-05 15:24:15 +00:00
fi
2008-05-22 15:34:02 +00:00
AM_CONDITIONAL([HAVE_SASL], [test "x$with_sasl" = "xyes"])
AC_SUBST([SASL_CFLAGS])
AC_SUBST([SASL_LIBS])
2007-12-05 15:24:15 +00:00
2009-11-03 18:59:18 +00:00
dnl YAJL JSON library http://lloyd.github.com/yajl/
AC_ARG_WITH([yajl],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-yajl], [use YAJL for JSON parsing/formatting @<:@default=check@:>@]),
2009-11-03 18:59:18 +00:00
[],
[with_yajl=check])
YAJL_CFLAGS=
YAJL_LIBS=
if test "x$with_yajl" != "xno"; then
2010-03-24 08:10:13 +00:00
if test "x$with_yajl" != "xyes" && test "x$with_yajl" != "xcheck"; then
2009-11-03 18:59:18 +00:00
YAJL_CFLAGS="-I$with_yajl/include"
YAJL_LIBS="-L$with_yajl/lib"
fi
fail=0
old_cppflags="$CPPFLAGS"
2009-12-18 17:34:40 +00:00
old_libs="$LIBS"
2009-11-03 18:59:18 +00:00
CPPFLAGS="$CPPFLAGS $YAJL_CFLAGS"
2009-12-18 17:34:40 +00:00
LIBS="$LIBS $YAJL_LIBS"
2009-11-03 18:59:18 +00:00
AC_CHECK_HEADER([yajl/yajl_common.h],[],[
2009-12-07 16:51:14 +00:00
if test "x$with_yajl" = "xcheck" ; then
2009-11-03 18:59:18 +00:00
with_yajl=no
else
fail=1
fi])
if test "x$with_yajl" != "xno" ; then
AC_CHECK_LIB([yajl], [yajl_parse],[
YAJL_LIBS="$YAJL_LIBS -lyajl"
with_yajl=yes
],[
if test "x$with_yajl" = "xcheck" ; then
with_yajl=no
else
fail=1
fi
])
fi
test $fail = 1 &&
AC_MSG_ERROR([You must install the YAJL development package in order to compile libvirt])
CPPFLAGS="$old_cppflags"
2009-12-18 17:34:40 +00:00
LIBS="$old_libs"
2009-11-03 18:59:18 +00:00
if test "x$with_yajl" = "xyes" ; then
AC_DEFINE_UNQUOTED([HAVE_YAJL], 1,
[whether YAJL is available for JSON parsing/formatting])
fi
fi
AM_CONDITIONAL([HAVE_YAJL], [test "x$with_yajl" = "xyes"])
AC_SUBST([YAJL_CFLAGS])
AC_SUBST([YAJL_LIBS])
2007-12-05 18:21:27 +00:00
dnl PolicyKit library
POLKIT_CFLAGS=
POLKIT_LIBS=
2009-08-06 12:54:08 +00:00
PKCHECK_PATH=
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([polkit],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-polkit], [use PolicyKit for UNIX socket access checks @<:@default=check@:>@]),
2007-12-05 18:21:27 +00:00
[],
[with_polkit=check])
2009-08-06 12:54:08 +00:00
with_polkit0=no
with_polkit1=no
2010-03-24 21:31:31 +00:00
if test "x$with_polkit" = "xyes" || test "x$with_polkit" = "xcheck"; then
2009-08-06 12:54:08 +00:00
dnl Check for new polkit first - just a binary
AC_PATH_PROG([PKCHECK_PATH],[pkcheck], [], [/usr/sbin:$PATH])
if test "x$PKCHECK_PATH" != "x" ; then
AC_DEFINE_UNQUOTED([PKCHECK_PATH],["$PKCHECK_PATH"],[Location of pkcheck program])
2008-05-22 15:34:02 +00:00
AC_DEFINE_UNQUOTED([HAVE_POLKIT], 1,
2009-08-06 12:54:08 +00:00
[use PolicyKit for UNIX socket access checks])
AC_DEFINE_UNQUOTED([HAVE_POLKIT1], 1,
[use PolicyKit for UNIX socket access checks])
with_polkit="yes"
with_polkit1="yes"
else
dnl Check for old polkit second - library + binary
PKG_CHECK_MODULES(POLKIT, polkit-dbus >= $POLKIT_REQUIRED,
[with_polkit=yes], [
if test "x$with_polkit" = "xcheck" ; then
with_polkit=no
else
AC_MSG_ERROR(
[You must install PolicyKit >= $POLKIT_REQUIRED to compile libvirt])
fi
])
if test "x$with_polkit" = "xyes" ; then
AC_DEFINE_UNQUOTED([HAVE_POLKIT], 1,
[use PolicyKit for UNIX socket access checks])
AC_DEFINE_UNQUOTED([HAVE_POLKIT0], 1,
[use PolicyKit for UNIX socket access checks])
old_CFLAGS=$CFLAGS
2009-12-18 17:34:40 +00:00
old_LIBS=$LIBS
2009-08-06 12:54:08 +00:00
CFLAGS="$CFLAGS $POLKIT_CFLAGS"
2009-12-18 17:34:40 +00:00
LIBS="$LIBS $POLKIT_LIBS"
2009-08-06 12:54:08 +00:00
AC_CHECK_FUNCS([polkit_context_is_caller_authorized])
CFLAGS="$old_CFLAGS"
2009-12-18 17:34:40 +00:00
LIBS="$old_LIBS"
2009-08-06 12:54:08 +00:00
AC_PATH_PROG([POLKIT_AUTH], [polkit-auth])
if test "x$POLKIT_AUTH" != "x"; then
AC_DEFINE_UNQUOTED([POLKIT_AUTH],["$POLKIT_AUTH"],[Location of polkit-auth program])
fi
with_polkit0="yes"
2008-02-20 16:54:35 +00:00
fi
2008-01-22 21:30:05 +00:00
fi
2007-12-05 18:21:27 +00:00
fi
2008-05-22 15:34:02 +00:00
AM_CONDITIONAL([HAVE_POLKIT], [test "x$with_polkit" = "xyes"])
2009-08-06 12:54:08 +00:00
AM_CONDITIONAL([HAVE_POLKIT0], [test "x$with_polkit0" = "xyes"])
AM_CONDITIONAL([HAVE_POLKIT1], [test "x$with_polkit1" = "xyes"])
2008-05-22 15:34:02 +00:00
AC_SUBST([POLKIT_CFLAGS])
AC_SUBST([POLKIT_LIBS])
2007-12-05 15:24:15 +00:00
2007-09-19 01:56:55 +00:00
dnl Avahi library
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([avahi],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-avahi], [use avahi to advertise remote daemon @<:@default=check@:>@]),
2007-09-19 01:56:55 +00:00
[],
[with_avahi=check])
AVAHI_CFLAGS=
AVAHI_LIBS=
2010-03-24 21:31:31 +00:00
if test "x$with_avahi" = "xyes" || test "x$with_avahi" = "xcheck"; then
2008-01-22 21:30:05 +00:00
PKG_CHECK_MODULES(AVAHI, avahi-client >= $AVAHI_REQUIRED,
[with_avahi=yes], [
if test "x$with_avahi" = "xcheck" ; then
with_avahi=no
else
AC_MSG_ERROR(
[You must install Avahi >= $AVAHI_REQUIRED to compile libvirt])
fi
])
if test "x$with_avahi" = "xyes" ; then
2008-05-22 15:34:02 +00:00
AC_DEFINE_UNQUOTED([HAVE_AVAHI], 1,
2008-01-22 21:30:05 +00:00
[whether Avahi is used to broadcast server presense])
fi
2007-09-19 01:56:55 +00:00
fi
2008-05-22 15:34:02 +00:00
AM_CONDITIONAL([HAVE_AVAHI], [test "x$with_avahi" = "xyes"])
AC_SUBST([AVAHI_CFLAGS])
AC_SUBST([AVAHI_LIBS])
2007-09-19 01:56:55 +00:00
2008-02-20 15:38:29 +00:00
dnl SELinux
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([selinux],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-selinux], [use SELinux to manage security @<:@default=check@:>@]),
2008-02-20 15:38:29 +00:00
[],
[with_selinux=check])
SELINUX_CFLAGS=
SELINUX_LIBS=
if test "$with_selinux" != "no"; then
old_cflags="$CFLAGS"
old_libs="$LIBS"
if test "$with_selinux" = "check"; then
AC_CHECK_HEADER([selinux/selinux.h],[],[with_selinux=no])
2008-05-22 15:34:02 +00:00
AC_CHECK_LIB([selinux], [fgetfilecon],[],[with_selinux=no])
2008-02-20 15:38:29 +00:00
if test "$with_selinux" != "no"; then
with_selinux="yes"
fi
else
2008-05-22 15:40:01 +00:00
fail=0
AC_CHECK_HEADER([selinux/selinux.h],[],[fail=1])
AC_CHECK_LIB([selinux], [fgetfilecon],[],[fail=1])
test $fail = 1 &&
2010-04-21 17:44:29 +00:00
AC_MSG_ERROR([You must install the libselinux development package in order to compile libvirt with basic SELinux support])
2008-02-20 15:38:29 +00:00
fi
CFLAGS="$old_cflags"
LIBS="$old_libs"
fi
if test "$with_selinux" = "yes"; then
SELINUX_LIBS="-lselinux"
2010-04-21 17:44:29 +00:00
AC_DEFINE_UNQUOTED([HAVE_SELINUX], 1, [whether basic SELinux functionality is available])
2008-02-20 15:38:29 +00:00
fi
2008-05-22 15:34:02 +00:00
AM_CONDITIONAL([HAVE_SELINUX], [test "$with_selinux" != "no"])
AC_SUBST([SELINUX_CFLAGS])
AC_SUBST([SELINUX_LIBS])
2008-02-20 15:38:29 +00:00
2009-03-03 10:06:49 +00:00
AC_ARG_WITH([secdriver-selinux],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-secdriver-selinux], [use SELinux security driver @<:@default=check@:>@]),
2009-03-03 10:06:49 +00:00
[],
[with_secdriver_selinux=check])
if test "$with_selinux" != "yes" ; then
if test "$with_secdriver_selinux" = "check" ; then
with_secdriver_selinux=no
2010-04-21 17:44:29 +00:00
elif test "$with_secdriver_selinux" = "yes"; then
AC_MSG_ERROR([You must install the libselinux development package and enable SELinux with the --with-selinux=yes in order to compile libvirt --with-secdriver-selinux=yes])
2009-03-03 10:06:49 +00:00
fi
else
old_cflags="$CFLAGS"
old_libs="$LIBS"
CFLAGS="$CFLAGS $SELINUX_CFLAGS"
LIBS="$CFLAGS $SELINUX_LIBS"
fail=0
AC_CHECK_FUNC([selinux_virtual_domain_context_path], [], [fail=1])
AC_CHECK_FUNC([selinux_virtual_image_context_path], [], [fail=1])
CFLAGS="$old_cflags"
LIBS="$old_libs"
if test "$fail" = "1" ; then
if test "$with_secdriver_selinux" = "check" ; then
with_secdriver_selinux=no
else
2010-04-21 17:44:29 +00:00
AC_MSG_ERROR([You must install libselinux development package >= 2.0.82 in order to compile libvirt --with-secdriver-selinux=yes])
2009-03-03 10:06:49 +00:00
fi
else
with_secdriver_selinux=yes
AC_DEFINE_UNQUOTED([WITH_SECDRIVER_SELINUX], 1, [whether SELinux security driver is available])
fi
fi
AM_CONDITIONAL([WITH_SECDRIVER_SELINUX], [test "$with_secdriver_selinux" != "no"])
2009-10-08 14:34:22 +00:00
dnl AppArmor
AC_ARG_WITH([apparmor],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-apparmor], [use AppArmor to manage security @<:@default=check@:>@]),
2009-10-08 14:34:22 +00:00
[],
[with_apparmor=check])
APPARMOR_CFLAGS=
APPARMOR_LIBS=
if test "$with_apparmor" != "no"; then
old_cflags="$CFLAGS"
old_libs="$LIBS"
if test "$with_apparmor" = "check"; then
AC_CHECK_HEADER([sys/apparmor.h],[],[with_apparmor=no])
AC_CHECK_LIB([apparmor], [aa_change_profile],[],[with_apparmor=no])
AC_CHECK_LIB([apparmor], [aa_change_hat],[],[with_apparmor=no])
if test "$with_apparmor" != "no"; then
with_apparmor="yes"
fi
else
fail=0
AC_CHECK_HEADER([sys/apparmor.h],[],[fail=1])
AC_CHECK_LIB([apparmor], [aa_change_profile],[],[fail=1])
AC_CHECK_LIB([apparmor], [aa_change_hat],[],[fail=1])
test $fail = 1 &&
AC_MSG_ERROR([You must install the AppArmor development package in order to compile libvirt])
fi
CFLAGS="$old_cflags"
LIBS="$old_libs"
fi
if test "$with_apparmor" = "yes"; then
APPARMOR_LIBS="-lapparmor"
AC_DEFINE_UNQUOTED([HAVE_APPARMOR], 1, [whether AppArmor is available for security])
AC_DEFINE_UNQUOTED([APPARMOR_DIR], "/etc/apparmor.d", [path to apparmor directory])
AC_DEFINE_UNQUOTED([APPARMOR_PROFILES_PATH], "/sys/kernel/security/apparmor/profiles", [path to kernel profiles])
fi
AM_CONDITIONAL([HAVE_APPARMOR], [test "$with_apparmor" != "no"])
AC_SUBST([APPARMOR_CFLAGS])
AC_SUBST([APPARMOR_LIBS])
AC_ARG_WITH([secdriver-apparmor],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-secdriver-apparmor], [use AppArmor security driver @<:@default=check@:>@]),
2009-10-08 14:34:22 +00:00
[],
[with_secdriver_apparmor=check])
if test "$with_apparmor" != "yes" ; then
if test "$with_secdriver_apparmor" = "check" ; then
with_secdriver_apparmor=no
else
AC_MSG_ERROR([You must install the AppArmor development package in order to compile libvirt])
fi
else
old_cflags="$CFLAGS"
old_libs="$LIBS"
CFLAGS="$CFLAGS $APPARMOR_CFLAGS"
LIBS="$CFLAGS $APPARMOR_LIBS"
fail=0
AC_CHECK_FUNC([change_hat], [], [fail=1])
AC_CHECK_FUNC([aa_change_profile], [], [fail=1])
CFLAGS="$old_cflags"
LIBS="$old_libs"
if test "$fail" = "1" ; then
if test "$with_secdriver_apparmor" = "check" ; then
with_secdriver_apparmor=no
else
AC_MSG_ERROR([You must install the AppArmor development package in order to compile libvirt])
fi
else
with_secdriver_apparmor=yes
AC_DEFINE_UNQUOTED([WITH_SECDRIVER_APPARMOR], 1, [whether AppArmor security driver is available])
fi
fi
AM_CONDITIONAL([WITH_SECDRIVER_APPARMOR], [test "$with_secdriver_apparmor" != "no"])
2009-03-03 10:06:49 +00:00
2008-05-22 15:29:50 +00:00
dnl NUMA lib
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([numactl],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-numactl], [use numactl for host topology info @<:@default=check@:>@]),
2008-05-22 15:29:50 +00:00
[],
[with_numactl=check])
NUMACTL_CFLAGS=
NUMACTL_LIBS=
2010-03-24 08:10:13 +00:00
if test "$with_qemu" = "yes" && test "$with_numactl" != "no"; then
2008-05-22 15:29:50 +00:00
old_cflags="$CFLAGS"
old_libs="$LIBS"
if test "$with_numactl" = "check"; then
AC_CHECK_HEADER([numa.h],[],[with_numactl=no])
2008-05-22 15:34:02 +00:00
AC_CHECK_LIB([numa], [numa_available],[],[with_numactl=no])
2008-05-22 15:29:50 +00:00
if test "$with_numactl" != "no"; then
with_numactl="yes"
fi
else
2008-05-22 15:40:01 +00:00
fail=0
AC_CHECK_HEADER([numa.h],[],[fail=1])
AC_CHECK_LIB([numa], [numa_available],[],[fail=1])
test $fail = 1 &&
AC_MSG_ERROR([You must install the numactl development package in order to compile and run libvirt])
2008-05-22 15:29:50 +00:00
fi
CFLAGS="$old_cflags"
LIBS="$old_libs"
fi
if test "$with_numactl" = "yes"; then
NUMACTL_LIBS="-lnuma"
2008-05-22 15:35:51 +00:00
AC_DEFINE_UNQUOTED([HAVE_NUMACTL], 1, [whether numactl is available for topology info])
2008-05-22 15:29:50 +00:00
fi
2008-05-22 15:34:02 +00:00
AM_CONDITIONAL([HAVE_NUMACTL], [test "$with_numactl" != "no"])
AC_SUBST([NUMACTL_CFLAGS])
AC_SUBST([NUMACTL_LIBS])
2008-05-22 15:29:50 +00:00
2009-08-05 08:47:18 +00:00
nwfilter: Support for learning a VM's IP address
This patch implements support for learning a VM's IP address. It uses
the pcap library to listen on the VM's backend network interface (tap)
or the physical ethernet device (macvtap) and tries to capture packets
with source or destination MAC address of the VM and learn from DHCP
Offers, ARP traffic, or first-sent IPv4 packet what the IP address of
the VM's interface is. This then allows to instantiate the network
traffic filtering rules without the user having to provide the IP
parameter somewhere in the filter description or in the interface
description as a parameter. This only supports to detect the parameter
IP, which is for the assumed single IPv4 address of a VM. There is not
support for interfaces that may have multiple IP addresses (IP
aliasing) or IPv6 that may then require more than one valid IP address
to be detected. A VM can have multiple independent interfaces that each
uses a different IP address and in that case it will be attempted to
detect each one of the address independently.
So, when for example an interface description in the domain XML has
looked like this up to now:
<interface type='bridge'>
<source bridge='mybridge'/>
<model type='virtio'/>
<filterref filter='clean-traffic'>
<parameter name='IP' value='10.2.3.4'/>
</filterref>
</interface>
you may omit the IP parameter:
<interface type='bridge'>
<source bridge='mybridge'/>
<model type='virtio'/>
<filterref filter='clean-traffic'/>
</interface>
Internally I am walking the 'tree' of a VM's referenced network filters
and determine with the given variables which variables are missing. Now,
the above IP parameter may be missing and this causes a libvirt-internal
thread to be started that uses the pcap library's API to listen to the
backend interface (in case of macvtap to the physical interface) in an
attempt to determine the missing IP parameter. If the backend interface
disappears the thread terminates assuming the VM was brought down. In
case of a macvtap device a timeout is being used to wait for packets
from the given VM (filtering by VM's interface MAC address). If the VM's
macvtap device disappeared the thread also terminates. In all other
cases it tries to determine the IP address of the VM and will then apply
the rules late on the given interface, which would have happened
immediately if the IP parameter had been explicitly given. In case an
error happens while the firewall rules are applied, the VM's backend
interface is 'down'ed preventing it to communicate. Reasons for failure
for applying the network firewall rules may that an ebtables/iptables
command failes or OOM errors. Essentially the same failure reasons may
occur as when the firewall rules are applied immediately on VM start,
except that due to the late application of the filtering rules the VM
now is already running and cannot be hindered anymore from starting.
Bringing down the whole VM would probably be considered too drastic.
While a VM's IP address is attempted to be determined only limited
updates to network filters are allowed. In particular it is prevented
that filters are modified in such a way that they would introduce new
variables.
A caveat: The algorithm does not know which one is the appropriate IP
address of a VM. If the VM spoofs an IP address in its first ARP traffic
or IPv4 packets its filtering rules will be instantiated for this IP
address, thus 'locking' it to the found IP address. So, it's still
'safer' to explicitly provide the IP address of a VM's interface in the
filter description if it is known beforehand.
* configure.ac: detect libpcap
* libvirt.spec.in: require libpcap[-devel] if qemu is built
* src/internal.h: add the new ATTRIBUTE_PACKED define
* src/Makefile.am src/libvirt_private.syms: add the new modules and symbols
* src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added
* src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch]
src/nwfilter/nwfilter_ebiptables_driver.[ch]
src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in
* tests/nwfilterxml2xmltest: extend testing
2010-04-07 21:02:18 +00:00
dnl pcap lib
LIBPCAP_CONFIG="pcap-config"
LIBPCAP_CFLAGS=""
LIBPCAP_LIBS=""
LIBPCAP_FOUND="no"
AC_ARG_WITH([libpcap], AC_HELP_STRING([--with-libpcap=@<:@PFX@:>@], [libpcap location]))
if test "$with_qemu" = "yes"; then
if test "x$with_libpcap" != "xno" ; then
if test "x$with_libpcap" != "x" ; then
LIBPCAP_CONFIG=$with_libpcap/bin/$LIBPCAP_CONFIG
fi
AC_MSG_CHECKING(libpcap $LIBPCAP_CONFIG >= $LIBPCAP_REQUIRED )
if ! $LIBPCAP_CONFIG --libs > /dev/null 2>&1 ; then
AC_MSG_RESULT(no)
else
LIBPCAP_LIBS="`$LIBPCAP_CONFIG --libs`"
LIBPCAP_CFLAGS="`$LIBPCAP_CONFIG --cflags`"
LIBPCAP_FOUND="yes"
AC_MSG_RESULT(yes)
fi
fi
fi
if test "x$LIBPCAP_FOUND" = "xyes"; then
AC_DEFINE_UNQUOTED([HAVE_LIBPCAP], 1, [whether libpcap can be used])
fi
AC_SUBST([LIBPCAP_CFLAGS])
AC_SUBST([LIBPCAP_LIBS])
2009-08-05 08:47:18 +00:00
dnl
dnl Checks for the UML driver
dnl
2010-04-23 16:00:19 +00:00
if test "$with_libvirtd" = "no" ; then
with_uml=no
fi
2010-03-24 21:31:31 +00:00
if test "$with_uml" = "yes" || test "$with_uml" = "check"; then
2009-08-05 08:47:18 +00:00
AC_CHECK_HEADER([sys/inotify.h], [
with_uml=yes
], [
if test "$with_uml" = "check"; then
with_uml=no
AC_MSG_NOTICE([<sys/inotify.h> is required for the UML driver, disabling it])
else
AC_MSG_ERROR([The <sys/inotify.h> is required for the UML driver. Upgrade your libc6.])
fi
])
fi
2009-08-05 10:59:58 +00:00
if test "$with_uml" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_UML], 1, [whether UML driver is enabled])
fi
AM_CONDITIONAL([WITH_UML], [test "$with_uml" = "yes"])
2009-08-05 08:47:18 +00:00
dnl
dnl libssh checks
dnl
2010-03-24 08:10:13 +00:00
if test "$with_libssh2" != "yes" && test "$with_libssh2" != "no"; then
2009-09-04 10:08:47 +00:00
libssh2_path="$with_libssh2"
elif test "$with_libssh2" = "yes"; then
libssh2_path="/usr/local/lib/"
elif test "$with_libssh2" = "no"; then
2009-07-24 14:17:06 +00:00
with_phyp="no";
fi
if test "$with_phyp" = "check"; then
2009-09-09 14:21:38 +00:00
AC_CHECK_LIB([ssh2],[libssh2_session_startup],[
2009-09-04 10:08:47 +00:00
LIBSSH2_LIBS="$LIBSSH2_LIBS -lssh2 -L$libssh2_path"
2009-09-09 14:21:38 +00:00
AC_SUBST([LIBSSH2_LIBS])
],[
2009-07-24 14:17:06 +00:00
with_phyp="no"
2009-09-09 14:21:38 +00:00
with_libssh2="no";
],[])
if test "$with_phyp" != "no"; then
AC_CHECK_HEADERS([libssh2.h],[
with_phyp="yes"
LIBSSH2_CFLAGS="-I/usr/local/include"
AC_SUBST([LIBSSH2_CFLAGS])
],[
with_phyp="no"
with_libssh2="no";
],[
])
fi
2009-07-24 14:17:06 +00:00
2009-09-09 14:21:38 +00:00
if test "$with_phyp" != "no"; then
saved_libs="$LIBS"
2009-11-05 22:38:07 +00:00
LIBS="$LIBS -L$libssh2_path -lssh2"
2009-09-09 14:21:38 +00:00
AC_TRY_LINK([#include <libssh2.h>], [
(void) libssh2_session_block_directions(NULL);
], [
AC_DEFINE_UNQUOTED([WITH_PHYP], 1, [whether IBM HMC / IVM driver is enabled])
], [
with_phyp=no
AC_MSG_NOTICE([Function libssh2_session_block_directions() not present in your version of libssh2 but required for Phyp driver, disabling it])
])
LIBS="$saved_libs"
fi
2009-07-24 14:17:06 +00:00
elif test "$with_phyp" = "yes"; then
2009-09-04 10:08:47 +00:00
AC_CHECK_LIB([ssh2],[libssh2_session_startup],[
LIBSSH2_LIBS="$LIBSSH2_LIBS -lssh2 -L$libssh2_path"
AC_SUBST([LIBSSH2_LIBS])],[
2009-09-09 14:21:38 +00:00
AC_MSG_ERROR([You must install the libssh2 to compile Phyp driver.])
2009-07-24 14:17:06 +00:00
])
2009-09-04 10:08:47 +00:00
AC_CHECK_HEADERS([libssh2.h],[
LIBSSH2_CFLAGS="-I/usr/local/include"
AC_SUBST([LIBSSH2_CFLAGS])],[
2009-09-09 14:21:38 +00:00
AC_MSG_ERROR([Cannot find libssh2 headers. Is libssh2 installed ?])
2009-07-24 14:17:06 +00:00
],[])
2009-09-09 14:21:38 +00:00
saved_libs="$LIBS"
LIBS="$LIBS -lssh2"
AC_TRY_LINK([#include <libssh2.h>], [
(void) libssh2_session_block_directions(NULL);
], [], [
AC_MSG_ERROR([Function libssh2_session_block_directions() not present in your version of libssh2. Need >= 1.0])
])
LIBS="$saved_libs"
2009-07-24 14:17:06 +00:00
AC_DEFINE_UNQUOTED([WITH_PHYP], 1,
[whether IBM HMC / IVM driver is enabled])
fi
AM_CONDITIONAL([WITH_PHYP],[test "$with_phyp" = "yes"])
2009-06-29 11:33:13 +00:00
dnl libcap-ng
AC_ARG_WITH([capng],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-capng], [use libcap-ng to reduce libvirtd privileges @<:@default=check@:>@]),
2009-06-29 11:33:13 +00:00
[],
[with_capng=check])
dnl
dnl This check looks for 'capng_updatev' since that was
dnl introduced in 0.4.0 release which need as minimum
dnl
CAPNG_CFLAGS=
CAPNG_LIBS=
2010-03-24 08:10:13 +00:00
if test "$with_qemu" = "yes" && test "$with_capng" != "no"; then
2009-06-29 11:33:13 +00:00
old_cflags="$CFLAGS"
old_libs="$LIBS"
if test "$with_capng" = "check"; then
AC_CHECK_HEADER([cap-ng.h],[],[with_capng=no])
AC_CHECK_LIB([cap-ng], [capng_updatev],[],[with_capng=no])
if test "$with_capng" != "no"; then
with_capng="yes"
fi
else
fail=0
AC_CHECK_HEADER([cap-ng.h],[],[fail=1])
AC_CHECK_LIB([cap-ng], [capng_updatev],[],[fail=1])
test $fail = 1 &&
AC_MSG_ERROR([You must install the capng >= 0.4.0 development package in order to compile and run libvirt])
fi
CFLAGS="$old_cflags"
LIBS="$old_libs"
fi
if test "$with_capng" = "yes"; then
CAPNG_LIBS="-lcap-ng"
AC_DEFINE_UNQUOTED([HAVE_CAPNG], 1, [whether capng is available for privilege reduction])
fi
AM_CONDITIONAL([HAVE_CAPNG], [test "$with_capng" != "no"])
AC_SUBST([CAPNG_CFLAGS])
AC_SUBST([CAPNG_LIBS])
2005-12-08 10:23:34 +00:00
dnl virsh libraries
2007-12-04 18:27:52 +00:00
AC_CHECK_HEADERS([readline/readline.h])
2007-12-06 11:42:26 +00:00
# Check for readline.
2008-05-22 15:34:02 +00:00
AC_CHECK_LIB([readline], [readline],
2007-12-06 11:42:26 +00:00
[lv_use_readline=yes; VIRSH_LIBS="$VIRSH_LIBS -lreadline"],
[lv_use_readline=no])
# If the above test failed, it may simply be that -lreadline requires
# some termcap-related code, e.g., from one of the following libraries.
# See if adding one of them to LIBS helps.
if test $lv_use_readline = no; then
lv_saved_libs=$LIBS
LIBS=
2008-05-22 15:34:02 +00:00
AC_SEARCH_LIBS([tgetent], [ncurses curses termcap termlib])
2007-12-06 11:42:26 +00:00
case $LIBS in
no*) ;; # handle "no" and "none required"
*) # anything else is a -lLIBRARY
# Now, check for -lreadline again, also using $LIBS.
# Note: this time we use a different function, so that
# we don't get a cached "no" result.
2008-05-22 15:34:02 +00:00
AC_CHECK_LIB([readline], [rl_initialize],
2007-12-06 11:42:26 +00:00
[lv_use_readline=yes
VIRSH_LIBS="$VIRSH_LIBS -lreadline $LIBS"],,
[$LIBS])
;;
esac
test $lv_use_readline = no &&
AC_MSG_WARN([readline library not found])
LIBS=$lv_saved_libs
fi
if test $lv_use_readline = yes; then
AC_DEFINE_UNQUOTED([USE_READLINE], 1,
[whether virsh can use readline])
READLINE_CFLAGS=-DUSE_READLINE
2007-12-06 10:24:52 +00:00
else
2007-12-06 11:42:26 +00:00
READLINE_CFLAGS=
2007-12-06 10:24:52 +00:00
fi
2008-05-22 15:34:02 +00:00
AC_SUBST([READLINE_CFLAGS])
AC_SUBST([VIRSH_LIBS])
2005-12-08 10:23:34 +00:00
2008-02-20 15:42:30 +00:00
2008-10-10 13:57:13 +00:00
AC_ARG_WITH([network],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-network], [with virtual network driver @<:@default=yes@:>@]),[],[with_network=yes])
2008-10-10 13:57:13 +00:00
if test "$with_libvirtd" = "no" ; then
with_network=no
fi
if test "$with_network" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_NETWORK], 1, [whether network driver is enabled])
fi
AM_CONDITIONAL([WITH_NETWORK], [test "$with_network" = "yes"])
2009-02-17 10:23:19 +00:00
with_bridge=no
if test "$with_qemu:$with_lxc:$with_network" != "no:no:no"; then
with_bridge=yes
AC_DEFINE_UNQUOTED([WITH_BRIDGE], 1, [whether bridge code is needed])
fi
AM_CONDITIONAL([WITH_BRIDGE], [test "$with_bridge" = "yes"])
2008-10-10 13:57:13 +00:00
2009-05-20 14:26:49 +00:00
dnl netcf library
AC_ARG_WITH([netcf],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-netcf], [libnetcf support to configure physical host network interfaces @<:@default=check@:>@]),
2009-05-20 14:26:49 +00:00
[], [with_netcf=check])
NETCF_CFLAGS=
NETCF_LIBS=
2010-03-24 21:31:31 +00:00
if test "$with_netcf" = "yes" || test "$with_netcf" = "check"; then
2009-05-20 14:26:49 +00:00
PKG_CHECK_MODULES(NETCF, netcf >= $NETCF_REQUIRED,
[with_netcf=yes], [
if test "$with_netcf" = "check" ; then
with_netcf=no
else
AC_MSG_ERROR(
[You must install libnetcf >= $NETCF_REQUIRED to compile libvirt])
fi
])
if test "$with_netcf" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_NETCF], 1,
[whether libnetcf is available to configure physical host network interfaces])
fi
fi
AM_CONDITIONAL([WITH_NETCF], [test "$with_netcf" = "yes"])
AC_SUBST([NETCF_CFLAGS])
AC_SUBST([NETCF_LIBS])
2008-02-20 15:42:30 +00:00
2009-09-14 12:31:23 +00:00
with_secrets=yes
if test "$with_libvirtd" = "no"; then
with_secrets=no
fi
if test "$with_secrets" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_SECRETS], 1, [whether local secrets management driver is available])
fi
AM_CONDITIONAL([WITH_SECRETS], [test "$with_secrets" = "yes"])
2010-03-25 17:46:09 +00:00
with_nwfilter=yes
if test "$with_libvirtd" = "no"; then
with_nwfilter=no
fi
if test "$with_nwfilter" = "yes" ; then
AC_DEFINE([WITH_NWFILTER], 1, [whether local network filter management driver is available])
fi
AM_CONDITIONAL([WITH_NWFILTER], [test "$with_nwfilter" = "yes"])
2009-09-14 12:31:23 +00:00
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([storage-fs],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-storage-fs], [with FileSystem backend for the storage driver @<:@default=check@:>@]),[],[with_storage_fs=check])
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([storage-lvm],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-storage-lvm], [with LVM backend for the storage driver @<:@default=check@:>@]),[],[with_storage_lvm=check])
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([storage-iscsi],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-storage-iscsi], [with iSCSI backend for the storage driver @<:@default=check@:>@]),[],[with_storage_iscsi=check])
2009-04-01 16:03:22 +00:00
AC_ARG_WITH([storage-scsi],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-storage-scsi], [with SCSI backend for the storage driver @<:@default=check@:>@]),[],[with_storage_scsi=check])
2009-09-08 13:47:45 +00:00
AC_ARG_WITH([storage-mpath],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-storage-mpath], [with mpath backend for the storage driver @<:@default=check@:>@]),[],[with_storage_mpath=check])
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([storage-disk],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-storage-disk], [with GPartd Disk backend for the storage driver @<:@default=check@:>@]),[],[with_storage_disk=check])
2008-02-20 15:42:30 +00:00
2008-09-05 12:03:45 +00:00
with_storage_dir=yes
if test "$with_libvirtd" = "no"; then
with_storage_dir=no
with_storage_fs=no
with_storage_lvm=no
with_storage_iscsi=no
2009-04-01 16:03:22 +00:00
with_storage_scsi=no
2009-09-08 13:47:45 +00:00
with_storage_mpath=no
2008-09-05 12:03:45 +00:00
with_storage_disk=no
fi
if test "$with_storage_dir" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_STORAGE_DIR], 1, [whether directory backend for storage driver is enabled])
fi
AM_CONDITIONAL([WITH_STORAGE_DIR], [test "$with_storage_dir" = "yes"])
2010-03-24 21:31:31 +00:00
if test "$with_storage_fs" = "yes" || test "$with_storage_fs" = "check"; then
2008-05-22 15:34:02 +00:00
AC_PATH_PROG([MOUNT], [mount], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([UMOUNT], [umount], [], [$PATH:/sbin:/usr/sbin])
2008-02-20 15:42:30 +00:00
if test "$with_storage_fs" = "yes" ; then
2008-05-22 15:34:02 +00:00
if test -z "$MOUNT" ; then AC_MSG_ERROR([We need mount for FS storage driver]) ; fi
2008-05-22 15:40:01 +00:00
if test -z "$UMOUNT" ; then AC_MSG_ERROR([We need umount for FS storage driver]) ; fi
2008-02-20 15:42:30 +00:00
else
if test -z "$MOUNT" ; then with_storage_fs=no ; fi
if test -z "$UMOUNT" ; then with_storage_fs=no ; fi
if test "$with_storage_fs" = "check" ; then with_storage_fs=yes ; fi
fi
if test "$with_storage_fs" = "yes" ; then
2008-05-22 15:34:02 +00:00
AC_DEFINE_UNQUOTED([WITH_STORAGE_FS], 1, [whether FS backend for storage driver is enabled])
2008-02-20 15:42:30 +00:00
AC_DEFINE_UNQUOTED([MOUNT],["$MOUNT"],
[Location or name of the mount program])
AC_DEFINE_UNQUOTED([UMOUNT],["$UMOUNT"],
[Location or name of the mount program])
fi
fi
2008-05-22 15:34:02 +00:00
AM_CONDITIONAL([WITH_STORAGE_FS], [test "$with_storage_fs" = "yes"])
2008-08-27 20:05:58 +00:00
if test "$with_storage_fs" = "yes"; then
AC_PATH_PROG([SHOWMOUNT], [showmount], [], [$PATH:/sbin:/usr/sbin])
AC_DEFINE_UNQUOTED([SHOWMOUNT], ["$SHOWMOUNT"],
[Location or name of the showmount program])
fi
2008-02-20 15:42:30 +00:00
2010-03-24 21:31:31 +00:00
if test "$with_storage_lvm" = "yes" || test "$with_storage_lvm" = "check"; then
2008-05-22 15:34:02 +00:00
AC_PATH_PROG([PVCREATE], [pvcreate], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([VGCREATE], [vgcreate], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([LVCREATE], [lvcreate], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([PVREMOVE], [pvremove], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([VGREMOVE], [vgremove], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([LVREMOVE], [lvremove], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([VGCHANGE], [vgchange], [], [$PATH:/sbin:/usr/sbin])
2008-11-05 11:41:43 +00:00
AC_PATH_PROG([VGSCAN], [vgscan], [], [$PATH:/sbin:/usr/sbin])
2008-05-22 15:34:02 +00:00
AC_PATH_PROG([PVS], [pvs], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([VGS], [vgs], [], [$PATH:/sbin:/usr/sbin])
AC_PATH_PROG([LVS], [lvs], [], [$PATH:/sbin:/usr/sbin])
2008-02-20 15:45:33 +00:00
if test "$with_storage_lvm" = "yes" ; then
2008-05-22 15:34:02 +00:00
if test -z "$PVCREATE" ; then AC_MSG_ERROR([We need pvcreate for LVM storage driver]) ; fi
if test -z "$VGCREATE" ; then AC_MSG_ERROR([We need vgcreate for LVM storage driver]) ; fi
if test -z "$LVCREATE" ; then AC_MSG_ERROR([We need lvcreate for LVM storage driver]) ; fi
if test -z "$PVREMOVE" ; then AC_MSG_ERROR([We need pvremove for LVM storage driver]) ; fi
if test -z "$VGREMOVE" ; then AC_MSG_ERROR([We need vgremove for LVM storage driver]) ; fi
if test -z "$LVREMOVE" ; then AC_MSG_ERROR([We need lvremove for LVM storage driver]) ; fi
if test -z "$VGCHANGE" ; then AC_MSG_ERROR([We need vgchange for LVM storage driver]) ; fi
2008-11-05 11:41:43 +00:00
if test -z "$VGSCAN" ; then AC_MSG_ERROR([We need vgscan for LVM storage driver]) ; fi
2008-05-22 15:34:02 +00:00
if test -z "$PVS" ; then AC_MSG_ERROR([We need pvs for LVM storage driver]) ; fi
if test -z "$VGS" ; then AC_MSG_ERROR([We need vgs for LVM storage driver]) ; fi
if test -z "$LVS" ; then AC_MSG_ERROR([We need lvs for LVM storage driver]) ; fi
2008-02-20 15:45:33 +00:00
else
if test -z "$PVCREATE" ; then with_storage_lvm=no ; fi
if test -z "$VGCREATE" ; then with_storage_lvm=no ; fi
if test -z "$LVCREATE" ; then with_storage_lvm=no ; fi
if test -z "$PVREMOVE" ; then with_storage_lvm=no ; fi
if test -z "$VGREMOVE" ; then with_storage_lvm=no ; fi
if test -z "$LVREMOVE" ; then with_storage_lvm=no ; fi
2008-11-05 11:41:43 +00:00
if test -z "$VGCHANGE" ; then with_storage_lvm=no ; fi
if test -z "$VGSCAN" ; then with_storage_lvm=no ; fi
2008-02-20 15:45:33 +00:00
if test -z "$PVS" ; then with_storage_lvm=no ; fi
if test -z "$VGS" ; then with_storage_lvm=no ; fi
if test -z "$LVS" ; then with_storage_lvm=no ; fi
if test "$with_storage_lvm" = "check" ; then with_storage_lvm=yes ; fi
fi
if test "$with_storage_lvm" = "yes" ; then
2008-05-22 15:34:02 +00:00
AC_DEFINE_UNQUOTED([WITH_STORAGE_LVM], 1, [whether LVM backend for storage driver is enabled])
2008-02-20 15:45:33 +00:00
AC_DEFINE_UNQUOTED([PVCREATE],["$PVCREATE"],[Location of pvcreate program])
AC_DEFINE_UNQUOTED([VGCREATE],["$VGCREATE"],[Location of vgcreate program])
AC_DEFINE_UNQUOTED([LVCREATE],["$LVCREATE"],[Location of lvcreate program])
AC_DEFINE_UNQUOTED([PVREMOVE],["$PVREMOVE"],[Location of pvcreate program])
AC_DEFINE_UNQUOTED([VGREMOVE],["$VGREMOVE"],[Location of vgcreate program])
AC_DEFINE_UNQUOTED([LVREMOVE],["$LVREMOVE"],[Location of lvcreate program])
AC_DEFINE_UNQUOTED([VGCHANGE],["$VGCHANGE"],[Location of vgchange program])
2008-11-05 11:41:43 +00:00
AC_DEFINE_UNQUOTED([VGSCAN],["$VGSCAN"],[Location of vgscan program])
2008-02-20 15:45:33 +00:00
AC_DEFINE_UNQUOTED([PVS],["$PVS"],[Location of pvs program])
AC_DEFINE_UNQUOTED([VGS],["$VGS"],[Location of vgs program])
AC_DEFINE_UNQUOTED([LVS],["$LVS"],[Location of lvs program])
fi
fi
2008-05-22 15:34:02 +00:00
AM_CONDITIONAL([WITH_STORAGE_LVM], [test "$with_storage_lvm" = "yes"])
2008-02-20 15:45:33 +00:00
2008-02-20 15:49:25 +00:00
2010-03-24 21:31:31 +00:00
if test "$with_storage_iscsi" = "yes" || test "$with_storage_iscsi" = "check"; then
2008-05-22 15:34:02 +00:00
AC_PATH_PROG([ISCSIADM], [iscsiadm], [], [$PATH:/sbin:/usr/sbin])
2008-02-20 15:49:25 +00:00
if test "$with_storage_iscsi" = "yes" ; then
2008-05-22 15:34:02 +00:00
if test -z "$ISCSIADM" ; then AC_MSG_ERROR([We need iscsiadm for iSCSI storage driver]) ; fi
2008-02-20 15:49:25 +00:00
else
if test -z "$ISCSIADM" ; then with_storage_iscsi=no ; fi
if test "$with_storage_iscsi" = "check" ; then with_storage_iscsi=yes ; fi
fi
if test "$with_storage_iscsi" = "yes" ; then
2008-05-22 15:34:02 +00:00
AC_DEFINE_UNQUOTED([WITH_STORAGE_ISCSI], 1, [whether iSCSI backend for storage driver is enabled])
2008-02-20 15:49:25 +00:00
AC_DEFINE_UNQUOTED([ISCSIADM],["$ISCSIADM"],[Location of iscsiadm program])
fi
fi
2008-05-22 15:34:02 +00:00
AM_CONDITIONAL([WITH_STORAGE_ISCSI], [test "$with_storage_iscsi" = "yes"])
2008-02-20 15:49:25 +00:00
2009-04-01 16:03:22 +00:00
if test "$with_storage_scsi" = "check"; then
with_storage_scsi=yes
AC_DEFINE_UNQUOTED([WITH_STORAGE_SCSI], 1,
[whether SCSI backend for storage driver is enabled])
fi
2009-04-02 18:42:33 +00:00
AM_CONDITIONAL([WITH_STORAGE_SCSI], [test "$with_storage_scsi" = "yes"])
2008-02-20 15:49:25 +00:00
2009-09-08 13:47:45 +00:00
if test "$with_storage_mpath" = "check"; then
with_storage_mpath=yes
AC_DEFINE_UNQUOTED([WITH_STORAGE_MPATH], 1,
[whether mpath backend for storage driver is enabled])
fi
AM_CONDITIONAL([WITH_STORAGE_MPATH], [test "$with_storage_mpath" = "yes"])
if test "$with_storage_mpath" = "yes"; then
DEVMAPPER_CFLAGS=
DEVMAPPER_LIBS=
2009-10-30 13:44:50 +00:00
PKG_CHECK_MODULES([DEVMAPPER], [devmapper >= $DEVMAPPER_REQUIRED], [], [DEVMAPPER_FOUND=no])
if test "$DEVMAPPER_FOUND" = "no"; then
# devmapper is missing pkg-config files in ubuntu, suse, etc
save_LIBS="$LIBS"
save_CFLAGS="$CFLAGS"
DEVMAPPER_FOUND=yes
AC_CHECK_HEADER([libdevmapper.h],,[DEVMAPPER_FOUND=no])
AC_CHECK_LIB([devmapper], [dm_task_run],,[DEVMAPPER_FOUND=no])
DEVMAPPER_LIBS="-ldevmapper"
LIBS="$save_LIBS"
CFLAGS="$save_CFLAGS"
fi
if test "$DEVMAPPER_FOUND" = "no" ; then
AC_MSG_ERROR([You must install device-mapper-devel/libdevmapper >= $DEVMAPPER_REQUIRED to compile libvirt])
fi
2009-09-08 13:47:45 +00:00
fi
AC_SUBST([DEVMAPPER_CFLAGS])
AC_SUBST([DEVMAPPER_LIBS])
2008-02-20 15:52:17 +00:00
LIBPARTED_CFLAGS=
LIBPARTED_LIBS=
2010-03-24 21:31:31 +00:00
if test "$with_storage_disk" = "yes" || test "$with_storage_disk" = "check"; then
2008-05-22 15:34:02 +00:00
AC_PATH_PROG([PARTED], [parted], [], [$PATH:/sbin:/usr/sbin])
2008-05-29 19:23:17 +00:00
if test -z "$PARTED" ; then
with_storage_disk=no
PARTED_FOUND=no
else
PARTED_FOUND=yes
fi
2008-02-20 15:52:17 +00:00
2010-03-24 08:10:13 +00:00
if test "$with_storage_disk" != "no" && test "x$PKG_CONFIG" != "x" ; then
2008-02-20 15:52:17 +00:00
PKG_CHECK_MODULES(LIBPARTED, libparted >= $PARTED_REQUIRED, [], [PARTED_FOUND=no])
fi
if test "$PARTED_FOUND" = "no"; then
# RHEL-5 vintage parted is missing pkg-config files
save_LIBS="$LIBS"
save_CFLAGS="$CFLAGS"
PARTED_FOUND=yes
2008-05-22 15:34:02 +00:00
AC_CHECK_HEADER([parted/parted.h],,[PARTED_FOUND=no])
AC_CHECK_LIB([uuid], [uuid_generate],,[PARTED_FOUND=no])
AC_CHECK_LIB([parted], [ped_device_read],,[PARTED_FOUND=no])
2008-02-20 15:52:17 +00:00
LIBPARTED_LIBS="-luuid -lparted"
LIBS="$save_LIBS"
CFLAGS="$save_CFLAGS"
fi
if test "$PARTED_FOUND" = "no" ; then
if test "$with_storage_disk" = "yes" ; then
2008-05-22 15:34:02 +00:00
AC_MSG_ERROR([We need parted for disk storage driver])
2008-02-20 15:52:17 +00:00
else
with_storage_disk=no
fi
else
with_storage_disk=yes
fi
if test "$with_storage_disk" = "yes"; then
2008-05-22 15:34:02 +00:00
AC_DEFINE_UNQUOTED([WITH_STORAGE_DISK], 1, [whether Disk backend for storage driver is enabled])
2008-02-20 15:52:17 +00:00
AC_DEFINE_UNQUOTED([PARTED],["$PARTED"], [Location or name of the parted program])
fi
fi
2008-05-22 15:34:02 +00:00
AM_CONDITIONAL([WITH_STORAGE_DISK], [test "$with_storage_disk" = "yes"])
AC_SUBST([LIBPARTED_CFLAGS])
AC_SUBST([LIBPARTED_LIBS])
2008-02-20 15:52:17 +00:00
2009-07-23 20:21:08 +00:00
dnl
2010-03-14 11:11:51 +00:00
dnl check for libcurl (ESX/XenAPI)
2009-07-23 20:21:08 +00:00
dnl
LIBCURL_CFLAGS=""
LIBCURL_LIBS=""
2010-03-24 21:31:31 +00:00
if test "$with_esx" = "yes" || test "$with_esx" = "check" || test "$with_xenapi" = "yes" || test "$with_xenapi" = "check"; then
2009-08-05 08:43:37 +00:00
PKG_CHECK_MODULES(LIBCURL, libcurl >= $LIBCURL_REQUIRED, [
2010-03-14 11:11:51 +00:00
if test "$with_esx" = "check"; then
with_esx=yes
fi
if test "$with_xenapi" = "check"; then
with_xenapi=yes
fi
2009-08-05 08:43:37 +00:00
], [
if test "$with_esx" = "check"; then
with_esx=no
2010-03-14 11:11:51 +00:00
AC_MSG_NOTICE([libcurl is required for the ESX driver, disabling it])
elif test "$with_esx" = "yes"; then
2009-08-05 08:43:37 +00:00
AC_MSG_ERROR([libcurl >= $LIBCURL_REQUIRED is required for the ESX driver])
fi
2010-03-14 11:11:51 +00:00
if test "$with_xenapi" = "check"; then
with_xenapi=no
AC_MSG_NOTICE([libcurl is required for the XenAPI driver, disabling it])
elif test "$with_xenapi" = "yes"; then
AC_MSG_ERROR([libcurl >= $LIBCURL_REQUIRED is required for the XenAPI driver])
fi
2009-08-05 08:43:37 +00:00
])
2009-07-23 20:21:08 +00:00
fi
2010-03-14 11:11:51 +00:00
2009-08-05 10:59:58 +00:00
if test "$with_esx" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_ESX], 1, [whether ESX driver is enabled])
fi
AM_CONDITIONAL([WITH_ESX], [test "$with_esx" = "yes"])
2009-07-23 20:21:08 +00:00
2010-03-14 11:11:51 +00:00
if test "$with_xenapi" = "yes" ; then
AC_DEFINE_UNQUOTED([WITH_XENAPI], 1, [whether XenAPI driver is enabled])
fi
AM_CONDITIONAL([WITH_XENAPI], [test "$with_xenapi" = "yes"])
2010-07-23 20:28:31 +00:00
# XXX as of libcurl-devel-7.20.1-3.fc13.x86_64, curl ships a version
# of <curl/curl.h> that #defines several wrapper macros around underlying
# functions to add type safety for gcc only. However, these macros
# spuriously trip gcc's -Wlogical-op warning. Avoid the warning by
# disabling the wrappers; even if it removes some type-check safety.
LIBCURL_CFLAGS="-DCURL_DISABLE_TYPECHECK $LIBCURL_CFLAGS"
2010-03-14 11:11:51 +00:00
2009-07-23 20:21:08 +00:00
AC_SUBST([LIBCURL_CFLAGS])
AC_SUBST([LIBCURL_LIBS])
2008-02-20 15:52:17 +00:00
2005-12-19 16:34:11 +00:00
dnl
dnl check for python
dnl
2009-10-02 15:19:47 +00:00
AC_ARG_WITH([python],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-python], [Build python bindings @<:@default=yes@:>@]),[],[with_python=yes])
2009-10-02 15:19:47 +00:00
2010-01-07 20:07:42 +00:00
if test "$enable_shared:$with_python" = no:yes; then
AC_MSG_WARN([Disabling shared libraries is incompatible with building Python extensions.])
AC_MSG_WARN([Ignoring --with-python.])
with_python=no
fi
2005-12-19 16:34:11 +00:00
PYTHON_VERSION=
PYTHON_INCLUDES=
if test "$with_python" != "no" ; then
if test -x "$with_python/bin/python"
then
2009-12-06 15:05:33 +00:00
AC_MSG_NOTICE(Found python in $with_python/bin/python)
2005-12-19 16:34:11 +00:00
PYTHON="$with_python/bin/python"
2009-12-06 15:05:33 +00:00
with_python=yes
2005-12-19 16:34:11 +00:00
else
2009-12-06 15:05:33 +00:00
if test -x "$with_python"
then
AC_MSG_NOTICE(Found python in $with_python)
PYTHON="$with_python"
with_python=yes
else
if test -x "$PYTHON"
then
AC_MSG_NOTICE(Found python in environment PYTHON=$PYTHON)
with_python=yes
fi
fi
2005-12-19 16:34:11 +00:00
fi
2009-12-06 15:05:33 +00:00
if test "$with_python" == "yes" ; then
AM_PATH_PYTHON(,, [:])
if test "$PYTHON" != : ; then
PYTHON_CONFIG="$PYTHON-config"
if test -x "$PYTHON_CONFIG"
then
PYTHON_INCLUDES=`$PYTHON_CONFIG --includes`
else
if test -r $PYTHON_EXEC_PREFIX/include/python$PYTHON_VERSION/Python.h
then
PYTHON_INCLUDES=-I$PYTHON_EXEC_PREFIX/include/python$PYTHON_VERSION
else
if test -r $prefix/include/python$PYTHON_VERSION/Python.h
then
PYTHON_INCLUDES=-I$prefix/include/python$PYTHON_VERSION
else
if test -r /usr/include/python$PYTHON_VERSION/Python.h
then
PYTHON_INCLUDES=-I/usr/include/python$PYTHON_VERSION
else
AC_MSG_NOTICE([Could not find python$PYTHON_VERSION/Python.h, disabling bindings])
with_python=no
fi
fi
fi
fi
else
AC_MSG_NOTICE([Could not find python interpreter, disabling bindings])
with_python=no
fi
2005-12-19 16:34:11 +00:00
else
2009-12-06 15:05:33 +00:00
AC_MSG_NOTICE([Could not find python in $with_python, disabling bindings])
with_python=no
2005-12-19 16:34:11 +00:00
fi
fi
2009-12-06 15:05:33 +00:00
AM_CONDITIONAL([WITH_PYTHON], [test "$with_python" = "yes"])
2008-05-22 15:34:02 +00:00
AC_SUBST([PYTHON_VERSION])
AC_SUBST([PYTHON_INCLUDES])
2009-12-06 15:05:33 +00:00
2005-12-19 16:34:11 +00:00
2007-02-07 13:41:44 +00:00
AC_MSG_CHECKING([whether this host is running a Xen kernel])
RUNNING_XEN=
if test -d /proc/sys/xen
then
RUNNING_XEN=yes
else
RUNNING_XEN=no
fi
AC_MSG_RESULT($RUNNING_XEN)
AC_MSG_CHECKING([If XenD UNIX socket /var/run/xend/xmlrpc.sock is accessible])
RUNNING_XEND=
if test -S /var/run/xend/xmlrpc.sock
then
RUNNING_XEND=yes
else
RUNNING_XEND=no
fi
AC_MSG_RESULT($RUNNING_XEND)
2010-03-24 08:10:13 +00:00
AM_CONDITIONAL([ENABLE_XEN_TESTS], [test "$RUNNING_XEN" != "no" && test "$RUNNING_XEND" != "no"])
2007-02-07 13:41:44 +00:00
2008-05-22 15:34:02 +00:00
AC_ARG_ENABLE([test-coverage],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--enable-test-coverage], [turn on code coverage instrumentation @<:@default=no@:>@]),
2007-02-14 02:12:41 +00:00
[case "${enableval}" in
yes|no) ;;
*) AC_MSG_ERROR([bad value ${enableval} for test-coverage option]) ;;
esac],
[enableval=no])
2008-05-29 15:13:07 +00:00
enable_coverage=$enableval
2007-02-14 02:12:41 +00:00
2008-05-29 15:13:07 +00:00
if test "${enable_coverage}" = yes; then
2010-06-09 18:35:49 +00:00
COMPILER_FLAGS=
2007-02-14 02:12:41 +00:00
gl_COMPILER_FLAGS(-fprofile-arcs)
gl_COMPILER_FLAGS(-ftest-coverage)
AC_SUBST([COVERAGE_CFLAGS], [$COMPILER_FLAGS])
AC_SUBST([COVERAGE_LDFLAGS], [$COMPILER_FLAGS])
COMPILER_FLAGS=
fi
2008-05-29 15:13:07 +00:00
AC_ARG_ENABLE([test-oom],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--enable-test-oom], [memory allocation failure checking @<:@default=no@:>@]),
2008-05-29 15:13:07 +00:00
[case "${enableval}" in
yes|no) ;;
*) AC_MSG_ERROR([bad value ${enableval} for test-oom option]) ;;
esac],
[enableval=no])
enable_oom=$enableval
if test "${enable_oom}" = yes; then
have_trace=yes
AC_CHECK_HEADER([execinfo.h],[],[have_trace=no])
AC_CHECK_FUNC([backtrace],[],[have_trace=no])
if test "$have_trace" = "yes"; then
AC_DEFINE([TEST_OOM_TRACE], 1, [Whether backtrace() is available])
fi
AC_DEFINE([TEST_OOM], 1, [Whether malloc OOM checking is enabled])
fi
2009-05-19 10:17:17 +00:00
AC_ARG_ENABLE([test-locking],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--enable-test-locking], [thread locking tests using CIL @<:@default=no@:>@]),
2009-05-19 10:17:17 +00:00
[case "${enableval}" in
yes|no) ;;
*) AC_MSG_ERROR([bad value ${enableval} for test-locking option]) ;;
esac],
[enableval=no])
enable_locking=$enableval
if test "$enable_locking" = "yes"; then
LOCK_CHECKING_CFLAGS="-Dbool=char -D_Bool=char -save-temps"
AC_SUBST([LOCK_CHECKING_CFLAGS])
fi
AM_CONDITIONAL([WITH_CIL],[test "$enable_locking" = "yes"])
2007-11-26 11:52:38 +00:00
dnl Enable building the proxy?
2007-12-05 19:11:01 +00:00
2008-05-22 15:34:02 +00:00
AC_ARG_WITH([xen-proxy],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-xen-proxy], [add XEN setuid proxy support @<:@default=auto@:>@]),[],[with_xen_proxy=auto])
2007-12-05 19:11:01 +00:00
AC_MSG_CHECKING([if Xen setuid proxy is needed])
if test "$with_xen_proxy" = "auto"; then
if test "$with_polkit" = "yes"; then
with_xen_proxy="no"
else
with_xen_proxy="yes"
fi
fi
if test "$with_xen" != "yes"; then
with_xen_proxy="no"
fi
AC_MSG_RESULT([$with_xen_proxy])
2008-05-22 15:34:02 +00:00
AM_CONDITIONAL([WITH_PROXY],[test "$with_xen_proxy" = "yes"])
2008-03-17 17:30:48 +00:00
if test "$with_xen_proxy" = "yes"; then
2008-05-22 15:34:02 +00:00
AC_DEFINE([WITH_PROXY], 1, [Whether Xen proxy is enabled])
2008-03-17 17:30:48 +00:00
fi
2007-02-14 02:12:41 +00:00
2007-12-06 16:34:48 +00:00
dnl Enable building libvirtd?
2008-05-22 15:34:02 +00:00
AM_CONDITIONAL([WITH_LIBVIRTD],[test "x$with_libvirtd" = "xyes"])
2007-12-06 16:34:48 +00:00
2007-11-26 11:52:38 +00:00
dnl Check for gettext
2006-09-21 15:24:37 +00:00
AM_GNU_GETTEXT_VERSION([0.14.1])
AM_GNU_GETTEXT([external])
2010-02-24 09:53:44 +00:00
dnl Since we're using such an old version of gettext, we must also define
dnl this symbol, in order to make the autopoint-supplied Makefile.in.in
dnl work properly.
AC_SUBST([MKINSTALLDIRS], ["\$(top_builddir)/$ac_aux_dir/mkinstalldirs"])
2008-10-22 13:55:15 +00:00
ALL_LINGUAS=`cd "$srcdir/po" > /dev/null && ls *.po | sed 's+\.po$++'`
2006-09-21 15:24:37 +00:00
2007-11-29 17:44:01 +00:00
dnl Extra link-time flags for Cygwin.
dnl Copied from libxml2 configure.in, but I removed mingw changes
dnl for now since I'm not supporting mingw at present. - RWMJ
CYGWIN_EXTRA_LDFLAGS=
CYGWIN_EXTRA_LIBADD=
CYGWIN_EXTRA_PYTHON_LIBADD=
2008-01-05 16:06:36 +00:00
MINGW_EXTRA_LDFLAGS=
2010-03-16 22:54:22 +00:00
WIN32_EXTRA_CFLAGS=
2010-03-22 01:25:36 +00:00
LIBVIRT_SYMBOL_FILE=libvirt.syms
2010-07-26 16:38:30 +00:00
LIBVIRT_QEMU_SYMBOL_FILE='$(srcdir)/libvirt_qemu.syms'
2007-11-29 17:44:01 +00:00
case "$host" in
*-*-cygwin*)
CYGWIN_EXTRA_LDFLAGS="-no-undefined"
CYGWIN_EXTRA_LIBADD="${INTLLIBS}"
if test "x$PYTHON_VERSION" != "x"; then
CYGWIN_EXTRA_PYTHON_LIBADD="-L/usr/lib/python${PYTHON_VERSION}/config -lpython${PYTHON_VERSION}"
fi
;;
2008-01-05 16:06:36 +00:00
*-*-mingw*)
MINGW_EXTRA_LDFLAGS="-no-undefined"
;;
2007-11-29 17:44:01 +00:00
esac
2010-03-16 22:54:22 +00:00
case "$host" in
*-*-mingw* | *-*-cygwin* | *-*-msvc* )
# If the host is Windows, and shared libraries are disabled, we
# need to add -DLIBVIRT_STATIC to the CFLAGS for proper linking
if test "x$enable_shared" = "xno"; then
WIN32_EXTRA_CFLAGS="-DLIBVIRT_STATIC"
fi
2010-04-27 07:43:55 +00:00
esac
case "$host" in
*-*-mingw* | *-*-msvc* )
2010-03-22 01:25:36 +00:00
# Also set the symbol file to .def, so src/Makefile generates libvirt.def
# from libvirt.syms and passes libvirt.def instead of libvirt.syms to the linker
LIBVIRT_SYMBOL_FILE=libvirt.def
2010-04-27 07:43:55 +00:00
# mingw's ld has the --version-script parameter, but it requires a .def file
2010-05-03 10:21:58 +00:00
# instead to work properly, therefore clear --version-script here and use
# -Wl, to pass the .def file to the linker
2010-04-27 07:43:55 +00:00
# cygwin's ld has the --version-script parameter too, but for some reason
# it's working there as expected
2010-05-03 10:21:58 +00:00
VERSION_SCRIPT_FLAGS="-Wl,"
2010-03-16 22:54:22 +00:00
;;
esac
2008-05-22 15:34:02 +00:00
AC_SUBST([CYGWIN_EXTRA_LDFLAGS])
AC_SUBST([CYGWIN_EXTRA_LIBADD])
AC_SUBST([CYGWIN_EXTRA_PYTHON_LIBADD])
AC_SUBST([MINGW_EXTRA_LDFLAGS])
2010-03-16 22:54:22 +00:00
AC_SUBST([WIN32_EXTRA_CFLAGS])
2010-03-22 01:25:36 +00:00
AC_SUBST([LIBVIRT_SYMBOL_FILE])
2010-04-13 18:02:46 +00:00
AC_SUBST([LIBVIRT_QEMU_SYMBOL_FILE])
2010-05-03 10:21:58 +00:00
AC_SUBST([VERSION_SCRIPT_FLAGS])
2007-11-29 17:44:01 +00:00
2008-10-15 18:39:34 +00:00
2010-04-08 09:52:46 +00:00
dnl Look for windres to build a Windows icon resource.
case "$host" in
*-*-mingw* | *-*-cygwin* | *-*-msvc* )
AC_CHECK_TOOL([WINDRES], [windres], [])
;;
esac
AM_CONDITIONAL([WITH_WIN_ICON], [test "$WINDRES" != ""])
2008-11-21 12:16:08 +00:00
dnl Driver-Modules library
AC_ARG_WITH([driver-modules],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-driver-modules], [build drivers as loadable modules @<:@default=no@:>@]),
2008-11-21 12:16:08 +00:00
[],
[with_driver_modules=no])
2010-02-24 11:04:27 +00:00
DRIVER_MODULE_CFLAGS=
DRIVER_MODULE_LIBS=
2008-11-21 12:16:08 +00:00
if test "x$with_driver_modules" = "xyes" ; then
old_cflags="$CFLAGS"
old_libs="$LIBS"
fail=0
AC_CHECK_HEADER([dlfcn.h],[],[fail=1])
2010-03-04 15:45:02 +00:00
AC_SEARCH_LIBS([dlopen], [dl], [], [fail=1])
2008-11-21 12:16:08 +00:00
test $fail = 1 &&
AC_MSG_ERROR([You must have dlfcn.h / dlopen() support to build driver modules])
CFLAGS="$old_cflags"
LIBS="$old_libs"
fi
if test "$with_driver_modules" = "yes"; then
2010-02-24 11:04:27 +00:00
DRIVER_MODULE_CFLAGS="-export-dynamic"
2010-03-04 15:45:02 +00:00
case $ac_cv_search_dlopen in
no*) DRIVER_MODULE_LIBS= ;;
*) DRIVER_MODULE_LIBS=$ac_cv_search_dlopen ;;
esac
2008-11-21 12:16:08 +00:00
AC_DEFINE_UNQUOTED([WITH_DRIVER_MODULES], 1, [whether to build drivers as modules])
fi
AM_CONDITIONAL([WITH_DRIVER_MODULES], [test "$with_driver_modules" != "no"])
2010-02-24 11:04:27 +00:00
AC_SUBST([DRIVER_MODULE_CFLAGS])
AC_SUBST([DRIVER_MODULE_LIBS])
2008-11-21 12:16:08 +00:00
2008-02-28 17:07:37 +00:00
# Set LV_LIBTOOL_OBJDIR to "." or $lt_cv_objdir, depending on whether
# we're building shared libraries. This is the name of the directory
# in which .o files will be created.
test "$enable_shared" = no && lt_cv_objdir=.
LV_LIBTOOL_OBJDIR=${lt_cv_objdir-.}
2008-05-22 15:34:02 +00:00
AC_SUBST([LV_LIBTOOL_OBJDIR])
2008-02-28 17:07:37 +00:00
2009-11-13 12:12:09 +00:00
dnl HAL library check for host device enumeration
2008-11-21 12:27:11 +00:00
HAL_CFLAGS=
HAL_LIBS=
AC_ARG_WITH([hal],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-hal], [use HAL for host device enumeration @<:@default=check@:>@]),
2008-11-21 12:27:11 +00:00
[],
[with_hal=check])
if test "$with_libvirtd" = "no" ; then
with_hal=no
fi
2010-03-24 21:31:31 +00:00
if test "x$with_hal" = "xyes" || test "x$with_hal" = "xcheck"; then
2008-11-21 12:27:11 +00:00
PKG_CHECK_MODULES(HAL, hal >= $HAL_REQUIRED,
[with_hal=yes], [
if test "x$with_hal" = "xcheck" ; then
with_hal=no
else
AC_MSG_ERROR(
[You must install hal-devel >= $HAL_REQUIRED to compile libvirt])
fi
])
if test "x$with_hal" = "xyes" ; then
old_CFLAGS=$CFLAGS
2009-12-18 17:34:40 +00:00
old_LIBS=$LIBS
2008-11-21 12:27:11 +00:00
CFLAGS="$CFLAGS $HAL_CFLAGS"
2009-12-18 17:34:40 +00:00
LIBS="$LIBS $HAL_LIBS"
2008-11-21 12:27:11 +00:00
AC_CHECK_FUNCS([libhal_get_all_devices],,[with_hal=no])
2008-12-05 15:05:48 +00:00
AC_CHECK_FUNCS([dbus_watch_get_unix_fd])
2008-11-21 12:27:11 +00:00
CFLAGS="$old_CFLAGS"
2009-12-18 17:34:40 +00:00
LIBS="$old_LIBS"
2008-11-21 12:27:11 +00:00
fi
2009-12-18 17:29:13 +00:00
if test "x$with_hal" = "xyes" ; then
AC_DEFINE_UNQUOTED([HAVE_HAL], 1,
[use HAL for host device enumeration])
fi
2008-11-21 12:27:11 +00:00
fi
AM_CONDITIONAL([HAVE_HAL], [test "x$with_hal" = "xyes"])
AC_SUBST([HAL_CFLAGS])
AC_SUBST([HAL_LIBS])
2009-11-13 12:12:09 +00:00
dnl udev/libpciaccess library check for alternate host device enumeration
2009-11-12 21:48:24 +00:00
UDEV_CFLAGS=
UDEV_LIBS=
2009-11-13 12:12:09 +00:00
PCIACCESS_CFLAGS=
PCIACCESS_LIBS=
2009-11-12 21:48:24 +00:00
AC_ARG_WITH([udev],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-udev], [use libudev for host device enumeration @<:@default=check@:>@]),
2009-11-12 21:48:24 +00:00
[],
[with_udev=check])
if test "$with_libvirtd" = "no" ; then
with_udev=no
fi
2010-03-24 21:31:31 +00:00
if test "x$with_udev" = "xyes" || test "x$with_udev" = "xcheck"; then
2009-11-12 21:48:24 +00:00
PKG_CHECK_MODULES(UDEV, libudev >= $UDEV_REQUIRED,
2009-11-13 12:12:09 +00:00
[], [
2009-11-12 21:48:24 +00:00
if test "x$with_udev" = "xcheck" ; then
with_udev=no
else
AC_MSG_ERROR(
[You must install libudev-devel >= $UDEV_REQUIRED to compile libvirt])
fi
])
2009-11-13 12:12:09 +00:00
if test "x$with_udev" != "xno"; then
PKG_CHECK_MODULES(PCIACCESS, pciaccess >= $PCIACCESS_REQUIRED,
[with_udev=yes],
[
if test "x$with_udev" = "xcheck" ; then
with_udev=no
else
AC_MSG_ERROR(
[You must install libpciaccess-devel >= $PCIACCESS_REQUIRED to compile libvirt])
fi
])
fi
2009-11-12 21:48:24 +00:00
if test "x$with_udev" = "xyes" ; then
AC_DEFINE_UNQUOTED([HAVE_UDEV], 1,
[use UDEV for host device enumeration])
fi
fi
AM_CONDITIONAL([HAVE_UDEV], [test "x$with_udev" = "xyes"])
AC_SUBST([UDEV_CFLAGS])
AC_SUBST([UDEV_LIBS])
2009-11-12 22:22:00 +00:00
AC_SUBST([PCIACCESS_CFLAGS])
AC_SUBST([PCIACCESS_LIBS])
2009-11-12 21:48:24 +00:00
2008-11-21 12:27:11 +00:00
with_nodedev=no;
2010-03-24 21:31:31 +00:00
if test "$with_hal" = "yes" || test "$with_udev" = "yes";
2008-11-21 12:27:11 +00:00
then
with_nodedev=yes
AC_DEFINE_UNQUOTED([WITH_NODE_DEVICES], 1, [with node device driver])
fi
AM_CONDITIONAL([WITH_NODE_DEVICES], [test "$with_nodedev" = "yes"])
2010-05-03 23:41:55 +00:00
with_linux=no
case "$host" in
*-*-linux*)
with_linux=yes
;;
esac
AM_CONDITIONAL([WITH_LINUX], [test "$with_linux" = "yes"])
2009-01-05 14:08:26 +00:00
2009-07-15 21:25:01 +00:00
AC_ARG_WITH([qemu-user],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-qemu-user], [username to run QEMU system instance as @<:@default=root@:>@]),
2009-07-15 21:25:01 +00:00
[QEMU_USER=${withval}],
[QEMU_USER=root])
AC_ARG_WITH([qemu-group],
2010-01-17 14:48:45 +00:00
AC_HELP_STRING([--with-qemu-group], [groupname to run QEMU system instance as @<:@default=root@:>@]),
2009-07-15 21:25:01 +00:00
[QEMU_GROUP=${withval}],
[QEMU_GROUP=root])
AC_DEFINE_UNQUOTED([QEMU_USER], ["$QEMU_USER"], [QEMU user account])
AC_DEFINE_UNQUOTED([QEMU_GROUP], ["$QEMU_GROUP"], [QEMU group account])
2010-02-12 17:03:07 +00:00
AC_ARG_WITH([macvtap],
AC_HELP_STRING([--with-macvtap],[enable macvtap device @<:@default=check@:>@]),
[with_macvtap=${withval}],
[with_macvtap=check])
if test "$with_macvtap" != "no" ; then
2010-03-09 13:14:48 +00:00
AC_TRY_COMPILE([ #include <sys/socket.h>
#include <linux/rtnetlink.h> ],
2010-02-12 17:03:07 +00:00
[ int x = MACVLAN_MODE_BRIDGE; ],
[ with_macvtap=yes ],
[ if test "$with_macvtap" = "yes" ; then
AC_MSG_ERROR([Installed linux headers don't show support for macvtap device.])
fi
with_macvtap=no ])
if test "$with_macvtap" = "yes" ; then
val=1
else
val=0
fi
AC_DEFINE_UNQUOTED([WITH_MACVTAP], $val, [whether macvtap support is enabled])
fi
AM_CONDITIONAL([WITH_MACVTAP], [test "$with_macvtap" = "yes"])
add 802.1Qbh and 802.1Qbg handling
This patch that adds support for configuring 802.1Qbg and 802.1Qbh
switches. The 802.1Qbh part has been successfully tested with real
hardware. The 802.1Qbg part has only been tested with a (dummy)
server that 'behaves' similarly to how we expect lldpad to 'behave'.
The following changes were made during the development of this patch:
- Merging Scott's v13-pre1 patch
- Fixing endptr related bug while using virStrToLong_ui() pointed out
by Jim Meyering
- Addressing Jim Meyering's comments to v11
- requiring mac address to the vpDisassociateProfileId() function to
pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched)
- determining pid of lldpad daemon by reading it from /var/run/libvirt.pid
(hardcode as is hardcode alson in lldpad sources)
- merging netlink send code for kernel target and user space target
(lldpad) using one function nlComm() to send the messages
- adding a select() after the sending and before the reading of the
netlink response in case lldpad doesn't respond and so we don't hang
- when reading the port status, in case of 802.1Qbg, no status may be
received while things are 'in progress' and only at the end a status
will be there.
- when reading the port status, use the given instanceId and vf to pick
the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS.
- never sending nor parsing IFLA_PORT_SELF type of messages in the
802.1Qbg case
- iterating over the elements in a IFLA_VF_PORTS to pick the right
IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId
(802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg)
and reading the current status in IFLA_PORT_RESPONSE.
- recycling a previous patch that adds functionality to interface.c to
- get the vlan identifier on an interface
- get the flags of an interface and some convenience function to
check whether an interface is 'up' or not (not currently used here)
- adding function to determine the root physical interface of an
interface. For example if a macvtap is linked to eth0.100, it will
find eth0. Also adding a function that finds the vlan on the 'way to
the root physical interface'
- conveying the root physical interface name and index in case of 802.1Qbg
- conveying mac address of macvlan device and vlan identifier in
IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ]
to (future) lldpad via netlink
- To enable build with --without-macvtap rename the
[dis|]associatePortProfileId functions, prepend 'vp' before their
name and make them non-static functions.
- Renaming variable multicast to nltarget_kernel and inverting
the logic
- Addressing Jim Meyering's comments; this also touches existing
code for example for correcting indentation of break statements or
simplification of switch statements.
- Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses
- 802.1Qbg part prepared for sending a RTM_SETLINK and getting
processing status back plus a subsequent RTM_GETLINK to
get IFLA_PORT_RESPONSE.
Note: This interface for 802.1Qbg may still change
- [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid
compiler
warning when latest if_link.h isn't available
- move from Stefan's 802.1Qb{g|h} XML v8 to v9
- move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh
- remove debug fprintfs
- use virGetHostUUID (thanks Stefan!)
- fix compile issue when latest if_link.h isn't available
- change poll timeout to 10s, at 1/8 intervals
- if polling times out, log msg and return -ETIMEDOUT
- Add Stefan's code for getPortProfileStatus
- Poll for up to 2 secs for port-profile status, at 1/8 sec intervals:
- if status indicates error, abort openMacvtapTap
- if status indicates success, exit polling
- if status is "in-progress" after 2 secs of polling, exit
polling loop silently, without error
My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete.
I've tested using the recent kernel updates for VF_PORT netlink msgs and
enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several
direct interfaces, each configured with a port-profile per the XML. VM-to-VM,
and VM-to-external work as expected. VM-to-VM on same host (using same NIC)
works same as VM-to-VM where VMs are on diff hosts. I'm able to change
settings on the port-profile while the VM is running to change the virtual
port behaviour. For example, adjusting a QoS setting like rate limit. All
VMs with interfaces using that port-profile immediatly see the effect of the
change to the port-profile.
I don't have a SR-IOV device to test so source dev is a non-SR-IOV device,
but most of the code paths include support for specifing the source dev and
VF index. We'll need to complete this by discovering the PF given the VF
linkdev. Once we have the PF, we'll also have the VF index. All this info-
mation is available from sysfs.
2010-06-03 01:35:22 +00:00
AC_TRY_COMPILE([ #include <sys/socket.h>
#include <linux/rtnetlink.h> ],
[ int x = IFLA_PORT_MAX; ],
[ with_virtualport=yes ],
[ with_virtualport=no ])
if test "$with_virtualport" = "yes"; then
val=1
else
val=0
fi
AC_DEFINE_UNQUOTED([WITH_VIRTUALPORT], $val,
[whether vsi vepa support is enabled])
AM_CONDITIONAL([WITH_VIRTUALPORT], [test "$with_virtualport" = "yes"])
2010-02-12 17:03:07 +00:00
2010-05-25 19:31:38 +00:00
dnl netlink library
LIBNL_CFLAGS=""
LIBNL_LIBS=""
add 802.1Qbh and 802.1Qbg handling
This patch that adds support for configuring 802.1Qbg and 802.1Qbh
switches. The 802.1Qbh part has been successfully tested with real
hardware. The 802.1Qbg part has only been tested with a (dummy)
server that 'behaves' similarly to how we expect lldpad to 'behave'.
The following changes were made during the development of this patch:
- Merging Scott's v13-pre1 patch
- Fixing endptr related bug while using virStrToLong_ui() pointed out
by Jim Meyering
- Addressing Jim Meyering's comments to v11
- requiring mac address to the vpDisassociateProfileId() function to
pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched)
- determining pid of lldpad daemon by reading it from /var/run/libvirt.pid
(hardcode as is hardcode alson in lldpad sources)
- merging netlink send code for kernel target and user space target
(lldpad) using one function nlComm() to send the messages
- adding a select() after the sending and before the reading of the
netlink response in case lldpad doesn't respond and so we don't hang
- when reading the port status, in case of 802.1Qbg, no status may be
received while things are 'in progress' and only at the end a status
will be there.
- when reading the port status, use the given instanceId and vf to pick
the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS.
- never sending nor parsing IFLA_PORT_SELF type of messages in the
802.1Qbg case
- iterating over the elements in a IFLA_VF_PORTS to pick the right
IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId
(802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg)
and reading the current status in IFLA_PORT_RESPONSE.
- recycling a previous patch that adds functionality to interface.c to
- get the vlan identifier on an interface
- get the flags of an interface and some convenience function to
check whether an interface is 'up' or not (not currently used here)
- adding function to determine the root physical interface of an
interface. For example if a macvtap is linked to eth0.100, it will
find eth0. Also adding a function that finds the vlan on the 'way to
the root physical interface'
- conveying the root physical interface name and index in case of 802.1Qbg
- conveying mac address of macvlan device and vlan identifier in
IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ]
to (future) lldpad via netlink
- To enable build with --without-macvtap rename the
[dis|]associatePortProfileId functions, prepend 'vp' before their
name and make them non-static functions.
- Renaming variable multicast to nltarget_kernel and inverting
the logic
- Addressing Jim Meyering's comments; this also touches existing
code for example for correcting indentation of break statements or
simplification of switch statements.
- Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses
- 802.1Qbg part prepared for sending a RTM_SETLINK and getting
processing status back plus a subsequent RTM_GETLINK to
get IFLA_PORT_RESPONSE.
Note: This interface for 802.1Qbg may still change
- [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid
compiler
warning when latest if_link.h isn't available
- move from Stefan's 802.1Qb{g|h} XML v8 to v9
- move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh
- remove debug fprintfs
- use virGetHostUUID (thanks Stefan!)
- fix compile issue when latest if_link.h isn't available
- change poll timeout to 10s, at 1/8 intervals
- if polling times out, log msg and return -ETIMEDOUT
- Add Stefan's code for getPortProfileStatus
- Poll for up to 2 secs for port-profile status, at 1/8 sec intervals:
- if status indicates error, abort openMacvtapTap
- if status indicates success, exit polling
- if status is "in-progress" after 2 secs of polling, exit
polling loop silently, without error
My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete.
I've tested using the recent kernel updates for VF_PORT netlink msgs and
enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several
direct interfaces, each configured with a port-profile per the XML. VM-to-VM,
and VM-to-external work as expected. VM-to-VM on same host (using same NIC)
works same as VM-to-VM where VMs are on diff hosts. I'm able to change
settings on the port-profile while the VM is running to change the virtual
port behaviour. For example, adjusting a QoS setting like rate limit. All
VMs with interfaces using that port-profile immediatly see the effect of the
change to the port-profile.
I don't have a SR-IOV device to test so source dev is a non-SR-IOV device,
but most of the code paths include support for specifing the source dev and
VF index. We'll need to complete this by discovering the PF given the VF
linkdev. Once we have the PF, we'll also have the VF index. All this info-
mation is available from sysfs.
2010-06-03 01:35:22 +00:00
if test "$with_macvtap" = "yes" || test "$with_virtualport" = "yes"; then
2010-05-25 19:31:38 +00:00
PKG_CHECK_MODULES([LIBNL], [libnl-1 >= $LIBNL_REQUIRED], [
], [
AC_MSG_ERROR([libnl >= $LIBNL_REQUIRED is required for macvtap support])
])
fi
AC_SUBST([LIBNL_CFLAGS])
AC_SUBST([LIBNL_LIBS])
2008-11-25 15:36:09 +00:00
# Only COPYING.LIB is under version control, yet COPYING
# is included as part of the distribution tarball.
# Copy one to the other, but only if this is a srcdir-build.
# You are unlikely to be doing distribution-related things in a non-srcdir build
test "x$srcdir" = x. && ! test -f COPYING &&
cp -f COPYING.LIB COPYING
2005-12-09 10:37:37 +00:00
2010-04-07 15:02:25 +00:00
# Detect when running under the clang static analyzer's scan-build driver
# or Coverity-prevent's cov-build. Define STATIC_ANALYSIS accordingly.
test -n "$CCC_ANALYZER_ANALYSIS$COVERITY_BUILD_COMMAND" && t=1 || t=0
AC_DEFINE_UNQUOTED([STATIC_ANALYSIS], [$t],
[Define to 1 when performing static analysis.])
2005-12-08 15:08:46 +00:00
AC_OUTPUT(Makefile src/Makefile include/Makefile docs/Makefile \
2009-01-27 15:29:53 +00:00
docs/schemas/Makefile \
2007-12-07 14:35:18 +00:00
gnulib/lib/Makefile \
2007-12-10 18:26:56 +00:00
gnulib/tests/Makefile \
2008-10-10 11:33:10 +00:00
libvirt.pc libvirt.spec mingw32-libvirt.spec \
2008-05-29 19:27:04 +00:00
po/Makefile.in \
2006-06-26 15:02:18 +00:00
include/libvirt/Makefile include/libvirt/libvirt.h \
2006-05-09 15:35:46 +00:00
python/Makefile python/tests/Makefile \
2009-09-15 14:49:29 +00:00
daemon/Makefile \
2009-04-19 15:12:33 +00:00
tools/Makefile \
2006-08-24 21:46:28 +00:00
tests/Makefile proxy/Makefile \
2006-09-12 01:16:22 +00:00
tests/xml2sexprdata/Makefile \
tests/sexpr2xmldata/Makefile \
2007-01-19 20:30:05 +00:00
tests/xmconfigdata/Makefile \
2007-03-27 14:45:17 +00:00
tests/xencapsdata/Makefile \
2008-11-24 07:11:26 +00:00
tests/confdata/Makefile \
2009-12-14 12:40:42 +00:00
examples/apparmor/Makefile \
2009-02-26 16:14:50 +00:00
examples/domain-events/events-c/Makefile \
2009-09-16 12:07:48 +00:00
examples/domsuspend/Makefile \
examples/dominfo/Makefile \
2010-07-06 12:59:50 +00:00
examples/openauth/Makefile \
2009-09-16 12:07:48 +00:00
examples/python/Makefile \
2010-03-25 17:46:13 +00:00
examples/hellolibvirt/Makefile \
examples/xml/nwfilter/Makefile)
2007-09-18 23:36:30 +00:00
AC_MSG_NOTICE([])
AC_MSG_NOTICE([Configuration summary])
AC_MSG_NOTICE([=====================])
AC_MSG_NOTICE([])
AC_MSG_NOTICE([Drivers])
AC_MSG_NOTICE([])
AC_MSG_NOTICE([ Xen: $with_xen])
2007-12-05 19:11:01 +00:00
AC_MSG_NOTICE([ Proxy: $with_xen_proxy])
2007-09-18 23:36:30 +00:00
AC_MSG_NOTICE([ QEMU: $with_qemu])
2008-11-19 16:58:23 +00:00
AC_MSG_NOTICE([ UML: $with_uml])
2007-09-18 23:36:30 +00:00
AC_MSG_NOTICE([ OpenVZ: $with_openvz])
2009-04-17 16:09:07 +00:00
AC_MSG_NOTICE([ VBox: $with_vbox])
2010-03-14 11:11:51 +00:00
AC_MSG_NOTICE([ XenAPI: $with_xenapi])
2008-03-21 15:03:37 +00:00
AC_MSG_NOTICE([ LXC: $with_lxc])
2009-07-24 14:17:06 +00:00
AC_MSG_NOTICE([ PHYP: $with_phyp])
2009-05-25 11:56:00 +00:00
AC_MSG_NOTICE([ ONE: $with_one])
2009-07-23 20:21:08 +00:00
AC_MSG_NOTICE([ ESX: $with_esx])
2007-09-18 23:36:30 +00:00
AC_MSG_NOTICE([ Test: $with_test])
AC_MSG_NOTICE([ Remote: $with_remote])
2008-10-10 13:57:13 +00:00
AC_MSG_NOTICE([ Network: $with_network])
2007-12-06 16:34:48 +00:00
AC_MSG_NOTICE([Libvirtd: $with_libvirtd])
2009-05-20 14:26:49 +00:00
AC_MSG_NOTICE([ netcf: $with_netcf])
2010-02-12 17:03:07 +00:00
AC_MSG_NOTICE([ macvtap: $with_macvtap])
add 802.1Qbh and 802.1Qbg handling
This patch that adds support for configuring 802.1Qbg and 802.1Qbh
switches. The 802.1Qbh part has been successfully tested with real
hardware. The 802.1Qbg part has only been tested with a (dummy)
server that 'behaves' similarly to how we expect lldpad to 'behave'.
The following changes were made during the development of this patch:
- Merging Scott's v13-pre1 patch
- Fixing endptr related bug while using virStrToLong_ui() pointed out
by Jim Meyering
- Addressing Jim Meyering's comments to v11
- requiring mac address to the vpDisassociateProfileId() function to
pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched)
- determining pid of lldpad daemon by reading it from /var/run/libvirt.pid
(hardcode as is hardcode alson in lldpad sources)
- merging netlink send code for kernel target and user space target
(lldpad) using one function nlComm() to send the messages
- adding a select() after the sending and before the reading of the
netlink response in case lldpad doesn't respond and so we don't hang
- when reading the port status, in case of 802.1Qbg, no status may be
received while things are 'in progress' and only at the end a status
will be there.
- when reading the port status, use the given instanceId and vf to pick
the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS.
- never sending nor parsing IFLA_PORT_SELF type of messages in the
802.1Qbg case
- iterating over the elements in a IFLA_VF_PORTS to pick the right
IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId
(802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg)
and reading the current status in IFLA_PORT_RESPONSE.
- recycling a previous patch that adds functionality to interface.c to
- get the vlan identifier on an interface
- get the flags of an interface and some convenience function to
check whether an interface is 'up' or not (not currently used here)
- adding function to determine the root physical interface of an
interface. For example if a macvtap is linked to eth0.100, it will
find eth0. Also adding a function that finds the vlan on the 'way to
the root physical interface'
- conveying the root physical interface name and index in case of 802.1Qbg
- conveying mac address of macvlan device and vlan identifier in
IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ]
to (future) lldpad via netlink
- To enable build with --without-macvtap rename the
[dis|]associatePortProfileId functions, prepend 'vp' before their
name and make them non-static functions.
- Renaming variable multicast to nltarget_kernel and inverting
the logic
- Addressing Jim Meyering's comments; this also touches existing
code for example for correcting indentation of break statements or
simplification of switch statements.
- Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses
- 802.1Qbg part prepared for sending a RTM_SETLINK and getting
processing status back plus a subsequent RTM_GETLINK to
get IFLA_PORT_RESPONSE.
Note: This interface for 802.1Qbg may still change
- [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid
compiler
warning when latest if_link.h isn't available
- move from Stefan's 802.1Qb{g|h} XML v8 to v9
- move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh
- remove debug fprintfs
- use virGetHostUUID (thanks Stefan!)
- fix compile issue when latest if_link.h isn't available
- change poll timeout to 10s, at 1/8 intervals
- if polling times out, log msg and return -ETIMEDOUT
- Add Stefan's code for getPortProfileStatus
- Poll for up to 2 secs for port-profile status, at 1/8 sec intervals:
- if status indicates error, abort openMacvtapTap
- if status indicates success, exit polling
- if status is "in-progress" after 2 secs of polling, exit
polling loop silently, without error
My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete.
I've tested using the recent kernel updates for VF_PORT netlink msgs and
enic for Cisco's 10G Ethernet NIC. I tested many VMs, each with several
direct interfaces, each configured with a port-profile per the XML. VM-to-VM,
and VM-to-external work as expected. VM-to-VM on same host (using same NIC)
works same as VM-to-VM where VMs are on diff hosts. I'm able to change
settings on the port-profile while the VM is running to change the virtual
port behaviour. For example, adjusting a QoS setting like rate limit. All
VMs with interfaces using that port-profile immediatly see the effect of the
change to the port-profile.
I don't have a SR-IOV device to test so source dev is a non-SR-IOV device,
but most of the code paths include support for specifing the source dev and
VF index. We'll need to complete this by discovering the PF given the VF
linkdev. Once we have the PF, we'll also have the VF index. All this info-
mation is available from sysfs.
2010-06-03 01:35:22 +00:00
AC_MSG_NOTICE([virtport: $with_virtualport])
2007-09-18 23:36:30 +00:00
AC_MSG_NOTICE([])
2008-02-20 15:42:30 +00:00
AC_MSG_NOTICE([Storage Drivers])
AC_MSG_NOTICE([])
2008-09-05 12:03:45 +00:00
AC_MSG_NOTICE([ Dir: $with_storage_dir])
2008-02-20 15:42:30 +00:00
AC_MSG_NOTICE([ FS: $with_storage_fs])
AC_MSG_NOTICE([ NetFS: $with_storage_fs])
2008-02-20 15:45:33 +00:00
AC_MSG_NOTICE([ LVM: $with_storage_lvm])
2008-02-20 15:49:25 +00:00
AC_MSG_NOTICE([ iSCSI: $with_storage_iscsi])
2009-04-01 16:03:22 +00:00
AC_MSG_NOTICE([ SCSI: $with_storage_scsi])
2009-09-08 13:47:45 +00:00
AC_MSG_NOTICE([ mpath: $with_storage_mpath])
2008-02-20 15:52:17 +00:00
AC_MSG_NOTICE([ Disk: $with_storage_disk])
2008-02-20 15:42:30 +00:00
AC_MSG_NOTICE([])
2009-03-03 10:06:49 +00:00
AC_MSG_NOTICE([Security Drivers])
AC_MSG_NOTICE([])
AC_MSG_NOTICE([ SELinux: $with_secdriver_selinux])
2009-10-09 09:42:09 +00:00
AC_MSG_NOTICE([AppArmor: $with_secdriver_apparmor])
2009-03-03 10:06:49 +00:00
AC_MSG_NOTICE([])
2008-11-21 12:16:08 +00:00
AC_MSG_NOTICE([Driver Loadable Modules])
AC_MSG_NOTICE([])
if test "$with_driver_modules" != "no" ; then
2010-02-24 11:04:27 +00:00
AC_MSG_NOTICE([ dlopen: $DRIVER_MODULE_CFLAGS $DRIVER_MODULE_LIBS])
2008-11-21 12:16:08 +00:00
else
AC_MSG_NOTICE([ dlopen: no])
fi
2009-08-05 08:43:37 +00:00
AC_MSG_NOTICE([])
AC_MSG_NOTICE([Libraries])
AC_MSG_NOTICE([])
AC_MSG_NOTICE([ libxml: $LIBXML_CFLAGS $LIBXML_LIBS])
2009-07-23 20:21:08 +00:00
if test "$with_esx" = "yes" ; then
AC_MSG_NOTICE([ libcurl: $LIBCURL_CFLAGS $LIBCURL_LIBS])
else
AC_MSG_NOTICE([ libcurl: no])
fi
2009-09-04 10:08:47 +00:00
if test "$with_libssh2" != "no" ; then
2009-10-09 09:42:09 +00:00
AC_MSG_NOTICE([ libssh2: $LIBSSH2_CFLAGS $LIBSSH2_LIBS])
2009-07-24 14:17:06 +00:00
else
2009-10-09 09:42:09 +00:00
AC_MSG_NOTICE([ libssh2: no])
2009-07-24 14:17:06 +00:00
fi
2007-09-19 17:42:40 +00:00
AC_MSG_NOTICE([ gnutls: $GNUTLS_CFLAGS $GNUTLS_LIBS])
2007-12-05 15:24:15 +00:00
if test "$with_sasl" != "no" ; then
AC_MSG_NOTICE([ sasl: $SASL_CFLAGS $SASL_LIBS])
else
AC_MSG_NOTICE([ sasl: no])
fi
2009-11-03 18:59:18 +00:00
if test "$with_yajl" != "no" ; then
AC_MSG_NOTICE([ yajl: $YAJL_CFLAGS $YAJL_LIBS])
else
AC_MSG_NOTICE([ yajl: no])
fi
2007-09-19 01:56:55 +00:00
if test "$with_avahi" = "yes" ; then
AC_MSG_NOTICE([ avahi: $AVAHI_CFLAGS $AVAHI_LIBS])
else
AC_MSG_NOTICE([ avahi: no])
fi
2007-12-05 18:21:27 +00:00
if test "$with_polkit" = "yes" ; then
2009-08-06 12:54:08 +00:00
if test "$with_polkit0" = "yes" ; then
AC_MSG_NOTICE([ polkit: $POLKIT_CFLAGS $POLKIT_LIBS (version 0)])
else
AC_MSG_NOTICE([ polkit: $PKCHECK_PATH (version 1)])
fi
2007-12-05 18:21:27 +00:00
else
AC_MSG_NOTICE([ polkit: no])
fi
2008-02-20 15:38:29 +00:00
if test "$with_selinux" = "yes" ; then
2009-01-20 12:25:40 +00:00
AC_MSG_NOTICE([ selinux: $SELINUX_CFLAGS $SELINUX_LIBS])
2008-02-20 15:38:29 +00:00
else
2009-01-20 12:25:40 +00:00
AC_MSG_NOTICE([ selinux: no])
2008-02-20 15:38:29 +00:00
fi
2009-10-08 14:34:22 +00:00
if test "$with_apparmor" = "yes" ; then
2009-10-09 09:42:09 +00:00
AC_MSG_NOTICE([apparmor: $APPARMOR_CFLAGS $APPARMOR_LIBS])
2009-10-08 14:34:22 +00:00
else
2009-10-09 09:42:09 +00:00
AC_MSG_NOTICE([apparmor: no])
2009-10-08 14:34:22 +00:00
fi
2008-05-22 15:29:50 +00:00
if test "$with_numactl" = "yes" ; then
2009-01-20 12:25:40 +00:00
AC_MSG_NOTICE([ numactl: $NUMACTL_CFLAGS $NUMACTL_LIBS])
2008-05-22 15:29:50 +00:00
else
2009-01-20 12:25:40 +00:00
AC_MSG_NOTICE([ numactl: no])
2008-05-22 15:29:50 +00:00
fi
2009-06-29 11:33:13 +00:00
if test "$with_capng" = "yes" ; then
AC_MSG_NOTICE([ capng: $CAPNG_CFLAGS $CAPNG_LIBS])
else
AC_MSG_NOTICE([ capng: no])
fi
2008-11-04 23:37:23 +00:00
if test "$with_xen" = "yes" ; then
2009-01-20 12:25:40 +00:00
AC_MSG_NOTICE([ xen: $XEN_CFLAGS $XEN_LIBS])
2008-11-04 23:37:23 +00:00
else
2009-01-20 12:25:40 +00:00
AC_MSG_NOTICE([ xen: no])
2008-11-04 23:37:23 +00:00
fi
2010-03-14 11:11:51 +00:00
if test "$with_xenapi" = "yes" ; then
AC_MSG_NOTICE([ xenapi: $LIBXENSERVER_CFLAGS $LIBXENSERVER_LIBS])
else
AC_MSG_NOTICE([ xenapi: no])
fi
2008-11-21 12:27:11 +00:00
if test "$with_hal" = "yes" ; then
2009-01-20 12:25:40 +00:00
AC_MSG_NOTICE([ hal: $HAL_CFLAGS $HAL_LIBS])
2008-11-21 12:27:11 +00:00
else
2009-01-20 12:25:40 +00:00
AC_MSG_NOTICE([ hal: no])
2008-11-21 12:27:11 +00:00
fi
2009-11-12 21:48:24 +00:00
if test "$with_udev" = "yes" ; then
2009-11-16 16:11:05 +00:00
AC_MSG_NOTICE([ udev: $UDEV_CFLAGS $UDEV_LIBS $PCIACCESS_CFLAGS $PCIACCESS_LIBS])
2009-11-12 21:48:24 +00:00
else
AC_MSG_NOTICE([ udev: no])
fi
2009-05-20 14:26:49 +00:00
if test "$with_netcf" = "yes" ; then
AC_MSG_NOTICE([ netcf: $NETCF_CFLAGS $NETCF_LIBS])
else
AC_MSG_NOTICE([ netcf: no])
fi
2009-06-24 17:32:56 +00:00
if test "$with_one" = "yes" ; then
AC_MSG_NOTICE([ xmlrpc: $XMLRPC_CFLAGS $XMLRPC_LIBS])
else
AC_MSG_NOTICE([ xmlrpc: no])
fi
nwfilter: Support for learning a VM's IP address
This patch implements support for learning a VM's IP address. It uses
the pcap library to listen on the VM's backend network interface (tap)
or the physical ethernet device (macvtap) and tries to capture packets
with source or destination MAC address of the VM and learn from DHCP
Offers, ARP traffic, or first-sent IPv4 packet what the IP address of
the VM's interface is. This then allows to instantiate the network
traffic filtering rules without the user having to provide the IP
parameter somewhere in the filter description or in the interface
description as a parameter. This only supports to detect the parameter
IP, which is for the assumed single IPv4 address of a VM. There is not
support for interfaces that may have multiple IP addresses (IP
aliasing) or IPv6 that may then require more than one valid IP address
to be detected. A VM can have multiple independent interfaces that each
uses a different IP address and in that case it will be attempted to
detect each one of the address independently.
So, when for example an interface description in the domain XML has
looked like this up to now:
<interface type='bridge'>
<source bridge='mybridge'/>
<model type='virtio'/>
<filterref filter='clean-traffic'>
<parameter name='IP' value='10.2.3.4'/>
</filterref>
</interface>
you may omit the IP parameter:
<interface type='bridge'>
<source bridge='mybridge'/>
<model type='virtio'/>
<filterref filter='clean-traffic'/>
</interface>
Internally I am walking the 'tree' of a VM's referenced network filters
and determine with the given variables which variables are missing. Now,
the above IP parameter may be missing and this causes a libvirt-internal
thread to be started that uses the pcap library's API to listen to the
backend interface (in case of macvtap to the physical interface) in an
attempt to determine the missing IP parameter. If the backend interface
disappears the thread terminates assuming the VM was brought down. In
case of a macvtap device a timeout is being used to wait for packets
from the given VM (filtering by VM's interface MAC address). If the VM's
macvtap device disappeared the thread also terminates. In all other
cases it tries to determine the IP address of the VM and will then apply
the rules late on the given interface, which would have happened
immediately if the IP parameter had been explicitly given. In case an
error happens while the firewall rules are applied, the VM's backend
interface is 'down'ed preventing it to communicate. Reasons for failure
for applying the network firewall rules may that an ebtables/iptables
command failes or OOM errors. Essentially the same failure reasons may
occur as when the firewall rules are applied immediately on VM start,
except that due to the late application of the filtering rules the VM
now is already running and cannot be hindered anymore from starting.
Bringing down the whole VM would probably be considered too drastic.
While a VM's IP address is attempted to be determined only limited
updates to network filters are allowed. In particular it is prevented
that filters are modified in such a way that they would introduce new
variables.
A caveat: The algorithm does not know which one is the appropriate IP
address of a VM. If the VM spoofs an IP address in its first ARP traffic
or IPv4 packets its filtering rules will be instantiated for this IP
address, thus 'locking' it to the found IP address. So, it's still
'safer' to explicitly provide the IP address of a VM's interface in the
filter description if it is known beforehand.
* configure.ac: detect libpcap
* libvirt.spec.in: require libpcap[-devel] if qemu is built
* src/internal.h: add the new ATTRIBUTE_PACKED define
* src/Makefile.am src/libvirt_private.syms: add the new modules and symbols
* src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added
* src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch]
src/nwfilter/nwfilter_ebiptables_driver.[ch]
src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in
* tests/nwfilterxml2xmltest: extend testing
2010-04-07 21:02:18 +00:00
if test "$with_qemu" = "yes" ; then
AC_MSG_NOTICE([ pcap: $LIBPCAP_CFLAGS $LIBPCAP_LIBS])
else
AC_MSG_NOTICE([ pcap: no])
fi
2010-05-25 19:31:38 +00:00
if test "$with_macvtap" = "yes" ; then
AC_MSG_NOTICE([ nl: $LIBNL_CFLAGS $LIBNL_LIBS])
else
AC_MSG_NOTICE([ nl: no])
fi
2007-09-18 23:36:30 +00:00
AC_MSG_NOTICE([])
2008-05-29 15:13:07 +00:00
AC_MSG_NOTICE([Test suite])
AC_MSG_NOTICE([])
2009-01-20 12:25:40 +00:00
AC_MSG_NOTICE([ Coverage: $enable_coverage])
2008-05-29 15:13:07 +00:00
AC_MSG_NOTICE([ Alloc OOM: $enable_oom])
AC_MSG_NOTICE([])
2007-09-18 23:36:30 +00:00
AC_MSG_NOTICE([Miscellaneous])
AC_MSG_NOTICE([])
2009-01-20 12:25:40 +00:00
AC_MSG_NOTICE([ Debug: $enable_debug])
2008-01-19 18:36:01 +00:00
AC_MSG_NOTICE([ Warnings: $enable_compile_warnings])
2007-12-06 11:42:26 +00:00
AC_MSG_NOTICE([ Readline: $lv_use_readline])
2009-10-02 15:19:47 +00:00
AC_MSG_NOTICE([ Python: $with_python])
2007-09-18 23:36:30 +00:00
AC_MSG_NOTICE([])
2009-07-15 21:25:01 +00:00
AC_MSG_NOTICE([Privileges])
AC_MSG_NOTICE([])
AC_MSG_NOTICE([ QEMU: $QEMU_USER:$QEMU_GROUP])
2009-07-24 14:17:06 +00:00
AC_MSG_NOTICE([])