External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-23 14:15:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
c4f3c955d5
libvirt/tests/qemuxml2argvdata/virtio-non-transitional.x86_64-3.1.0.args

55 lines
3.1 KiB
Plaintext
Raw Normal View History

conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
LC_ALL=C \
PATH=/bin \
qemu: command: Override HOME variable for system QEMU By default, qemu user's home dir points to '/' which shouldn't be used at all. We therefore pass the HOME variable from the current variable iff not running as SUID, which means that for systemd we never set it. This patch makes sure, that for system QEMU this is always set to libDir/<driver>, session mode is left untouched. Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-06 12:29:01 +00:00
HOME=/tmp/lib/domain--1-QEMUGuest1 \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
USER=test \
LOGNAME=test \
qemu: command: Enforce setting XDG variables for system QEMU For session mode, only XDG_CACHE_HOME is set, because we want to remain integrating with services in user session, but for system mode, this would have become reading/writing to '/' which carries the obvious issue with permissions (also, '/' is the wrong location in 99.9% cases anyway). Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-08 11:15:07 +00:00
XDG_DATA_HOME=/tmp/lib/domain--1-QEMUGuest1/.local/share \
XDG_CACHE_HOME=/tmp/lib/domain--1-QEMUGuest1/.cache \
XDG_CONFIG_HOME=/tmp/lib/domain--1-QEMUGuest1/.config \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
QEMU_AUDIO_DRV=none \
/usr/bin/qemu-system-x86_64 \
-name guest=QEMUGuest1,debug-threads=on \
-S \
qemuxml2argvtest: Use internal wrapping of command line arguments virCommandToString has the possibility to return an already wrapped string with better format than what we get from the test wrapper script. The main advantage is that arguments for an option are always on the same line which makes it more easy to see what changed in a diff and prevents re-wrapping of the line if a wrapping point moves over the threshold. Additionally the used output is the same we have in the VM log file when a VM is starting. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-31 08:46:36 +00:00
-object secret,id=masterKey0,format=raw,file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
-machine pc-q35-3.1,accel=tcg,usb=off,dump-guest-core=off \
-m 214 \
qemu_command: Prefer '-overcommit mem-lock' over -realtime mlock' The latter is deprecated and will be removed soon. The advised replacement is '-overcommit mem-lock=on|off'. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-12 08:25:40 +00:00
-overcommit mem-lock=off \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
-smp 1,sockets=1,cores=1,threads=1 \
-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \
-display none \
-no-user-config \
-nodefaults \
qemu: use long on|off syntax for -chardev boolean option values The preferred syntax for boolean options is to set the value "on" or "off". QEMU 7.1.0 will deprecate the short format we currently use. The long format has been supported with -chardev since at least 1.5.3, so we don't need to check for it. Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-16 11:29:24 +00:00
-chardev socket,id=charmonitor,fd=1729,server=on,wait=off \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
-no-shutdown \
-no-acpi \
-boot strict=on \
qemuxml2argvtest: Use internal wrapping of command line arguments virCommandToString has the possibility to return an already wrapped string with better format than what we get from the test wrapper script. The main advantage is that arguments for an option are always on the same line which makes it more easy to see what changed in a diff and prevents re-wrapping of the line if a wrapping point moves over the threshold. Additionally the used output is the same we have in the VM log file when a VM is starting. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-31 08:46:36 +00:00
-device pcie-root-port,port=0x8,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,addr=0x1 \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
-device pcie-root-port,port=0x9,chassis=2,id=pci.2,bus=pcie.0,addr=0x1.0x1 \
qemu: Support interface model=virtio-{non-}transitional Add new <interface> model handling for virtio transitional devices. Ex: <interface> <model type='virtio-transitional'/> </interface> * "virtio-transitional" maps to qemu "virtio-net-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-net-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:32 +00:00
-device pcie-root-port,port=0xa,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x2 \
conf: Add <hostdev model='virtio-{non-}transitional'/> qemu vhost-scsi devices map to XML roughly like: <hostdev mode='subsystem' type='scsi_host'> <source protocol='vhost' wwpn=X/> </hostdev> To support vhost-scsi-pci-{non-}traditional in qemu, we need to to extend the SCSI Host hostdev XML to handle model= value. This matches the XML model= format used for mediated devices. This is just the domain_conf bits and some XML test cases. Use of virtio-X naming here does not match the hostdev protocol=vhost nor does it match the qemu vhost-X device naming, however it's more consistent with all other model= names in this area, and also matches the inconsistency of <vsock> devices which use model=virtio but map to vhost-vsock on the qemu commandline Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:33 +00:00
-device pcie-root-port,port=0xb,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x3 \
qemu: Support rng model=virtio-{non-}transitional Add new <rng> model values for virtio transitional devices. Ex: <rng model='virtio-transitional'> ... </rng> * "virtio-transitional" maps to qemu "virtio-rng-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-rng-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:35 +00:00
-device pcie-root-port,port=0xc,chassis=5,id=pci.5,bus=pcie.0,addr=0x1.0x4 \
conf: Add <filesystem model='virtio-{non-}transitional'/> <filesystem> devices lack the model= attribute which is used by most other device types. To eventually support virtio-9p-pci-{non-}traditional in qemu, let's add a standard model= attribute. The accepted values are: - virtio - virtio-transitional - virtio-non-transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:36 +00:00
-device pcie-root-port,port=0xd,chassis=6,id=pci.6,bus=pcie.0,addr=0x1.0x5 \
qemu: Support memballoon model=virtio-{non-}transitional Add new <memballoon> model values for virtio transitional devices. Ex: <memballoon model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-balloon-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-balloon-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:39 +00:00
-device pcie-root-port,port=0xe,chassis=7,id=pci.7,bus=pcie.0,addr=0x1.0x6 \
qemu: Support vsock model=virtio-{non-}transitional Add <vsock> model handling for virtio transitional devices. Ex: <vsock model='virtio-transitional'> ... </vsock> * "virtio-transitional" maps to qemu "vhost-vsock-pci-transitional" * "virtio-non-transitional" maps to qemu "vhost-vsock-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:40 +00:00
-device pcie-root-port,port=0xf,chassis=8,id=pci.8,bus=pcie.0,addr=0x1.0x7 \
qemuxml2argvtest: Use internal wrapping of command line arguments virCommandToString has the possibility to return an already wrapped string with better format than what we get from the test wrapper script. The main advantage is that arguments for an option are always on the same line which makes it more easy to see what changed in a diff and prevents re-wrapping of the line if a wrapping point moves over the threshold. Additionally the used output is the same we have in the VM log file when a VM is starting. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-31 08:46:36 +00:00
-device pcie-root-port,port=0x10,chassis=9,id=pci.9,bus=pcie.0,multifunction=on,addr=0x2 \
qemu: Support virtio-serial controller model=virtio-{non-}transitional Add controller type='virtio-serial' model handling for virtio transitional devices. Ex: <controller type='virtio-serial' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-serial-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-serial-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:44 +00:00
-device pcie-root-port,port=0x11,chassis=10,id=pci.10,bus=pcie.0,addr=0x2.0x1 \
qemu: Support scsi controller model=virtio-{non-}transitional Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:43 +00:00
-device pcie-root-port,port=0x12,chassis=11,id=pci.11,bus=pcie.0,addr=0x2.0x2 \
qemuxml2argvtest: Use internal wrapping of command line arguments virCommandToString has the possibility to return an already wrapped string with better format than what we get from the test wrapper script. The main advantage is that arguments for an option are always on the same line which makes it more easy to see what changed in a diff and prevents re-wrapping of the line if a wrapping point moves over the threshold. Additionally the used output is the same we have in the VM log file when a VM is starting. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-31 08:46:36 +00:00
-device virtio-scsi-pci,disable-legacy=on,disable-modern=off,id=scsi0,bus=pci.4,addr=0x0 \
-device virtio-serial-pci,disable-legacy=on,disable-modern=off,id=virtio-serial0,bus=pci.3,addr=0x0 \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
qemuxml2argvtest: Use internal wrapping of command line arguments virCommandToString has the possibility to return an already wrapped string with better format than what we get from the test wrapper script. The main advantage is that arguments for an option are always on the same line which makes it more easy to see what changed in a diff and prevents re-wrapping of the line if a wrapping point moves over the threshold. Additionally the used output is the same we have in the VM log file when a VM is starting. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-31 08:46:36 +00:00
-device virtio-blk-pci,disable-legacy=on,disable-modern=off,scsi=off,bus=pci.5,addr=0x0,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
conf: Add <filesystem model='virtio-{non-}transitional'/> <filesystem> devices lack the model= attribute which is used by most other device types. To eventually support virtio-9p-pci-{non-}traditional in qemu, let's add a standard model= attribute. The accepted values are: - virtio - virtio-transitional - virtio-non-transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:36 +00:00
-fsdev local,security_model=passthrough,id=fsdev-fs0,path=/export/fs1 \
qemuxml2argvtest: Use internal wrapping of command line arguments virCommandToString has the possibility to return an already wrapped string with better format than what we get from the test wrapper script. The main advantage is that arguments for an option are always on the same line which makes it more easy to see what changed in a diff and prevents re-wrapping of the line if a wrapping point moves over the threshold. Additionally the used output is the same we have in the VM log file when a VM is starting. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-31 08:46:36 +00:00
-device virtio-9p-pci,disable-legacy=on,disable-modern=off,id=fs0,fsdev=fsdev-fs0,mount_tag=fs1,bus=pci.1,addr=0x0 \
qemu: Support interface model=virtio-{non-}transitional Add new <interface> model handling for virtio transitional devices. Ex: <interface> <model type='virtio-transitional'/> </interface> * "virtio-transitional" maps to qemu "virtio-net-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-net-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:32 +00:00
-netdev user,id=hostnet0 \
qemuxml2argvtest: Use internal wrapping of command line arguments virCommandToString has the possibility to return an already wrapped string with better format than what we get from the test wrapper script. The main advantage is that arguments for an option are always on the same line which makes it more easy to see what changed in a diff and prevents re-wrapping of the line if a wrapping point moves over the threshold. Additionally the used output is the same we have in the VM log file when a VM is starting. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-31 08:46:36 +00:00
-device virtio-net-pci,disable-legacy=on,disable-modern=off,netdev=hostnet0,id=net0,mac=00:11:22:33:44:55,bus=pci.2,addr=0x0 \
-device virtio-input-host-pci,disable-legacy=on,disable-modern=off,id=input0,evdev=/dev/input/event1234,bus=pci.9,addr=0x0 \
-device vhost-scsi-pci,disable-legacy=on,disable-modern=off,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,bus=pci.6,addr=0x0 \
-device virtio-balloon-pci,disable-legacy=on,disable-modern=off,id=balloon0,bus=pci.7,addr=0x0 \
qemu: Support rng model=virtio-{non-}transitional Add new <rng> model values for virtio transitional devices. Ex: <rng model='virtio-transitional'> ... </rng> * "virtio-transitional" maps to qemu "virtio-rng-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-rng-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:35 +00:00
-object rng-random,id=objrng0,filename=/dev/urandom \
qemuxml2argvtest: Use internal wrapping of command line arguments virCommandToString has the possibility to return an already wrapped string with better format than what we get from the test wrapper script. The main advantage is that arguments for an option are always on the same line which makes it more easy to see what changed in a diff and prevents re-wrapping of the line if a wrapping point moves over the threshold. Additionally the used output is the same we have in the VM log file when a VM is starting. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-31 08:46:36 +00:00
-device virtio-rng-pci,disable-legacy=on,disable-modern=off,rng=objrng0,id=rng0,bus=pci.8,addr=0x0 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-device vhost-vsock-pci,disable-legacy=on,disable-modern=off,id=vsock0,guest-cid=4,vhostfd=6789,bus=pci.10,addr=0x0 \
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
-msg timestamp=on
Reference in New Issue Copy Permalink