libvirt/tests/qemuxmlconfdata/q35-pcie-autoadd.x86_64-4.2.0.args

68 lines
3.6 KiB
Plaintext
Raw Normal View History

qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 18:38:47 +00:00
LC_ALL=C \
PATH=/bin \
HOME=/var/lib/libvirt/qemu/domain--1-q35-test \
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 18:38:47 +00:00
USER=test \
LOGNAME=test \
XDG_DATA_HOME=/var/lib/libvirt/qemu/domain--1-q35-test/.local/share \
XDG_CACHE_HOME=/var/lib/libvirt/qemu/domain--1-q35-test/.cache \
XDG_CONFIG_HOME=/var/lib/libvirt/qemu/domain--1-q35-test/.config \
/usr/bin/qemu-system-x86_64 \
-name guest=q35-test,debug-threads=on \
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 18:38:47 +00:00
-S \
-object secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain--1-q35-test/master-key.aes \
-machine pc-q35-4.2,usb=off,dump-guest-core=off \
-accel tcg \
-cpu qemu64 \
-m size=2097152k \
-overcommit mem-lock=off \
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 18:38:47 +00:00
-smp 2,sockets=2,cores=1,threads=1 \
-uuid 11dbdcdd-4c3b-482b-8903-9bdb8c0a2774 \
-display none \
-no-user-config \
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 18:38:47 +00:00
-nodefaults \
-chardev socket,id=charmonitor,fd=1729,server=on,wait=off \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
-no-shutdown \
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 18:38:47 +00:00
-no-acpi \
-boot strict=on \
-device pcie-root-port,port=16,chassis=1,id=pci.1,bus=pcie.0,multifunction=on,addr=0x2 \
-device pcie-root-port,port=17,chassis=2,id=pci.2,bus=pcie.0,addr=0x2.0x1 \
-device pcie-root-port,port=18,chassis=3,id=pci.3,bus=pcie.0,addr=0x2.0x2 \
-device pcie-root-port,port=19,chassis=4,id=pci.4,bus=pcie.0,addr=0x2.0x3 \
-device pcie-root-port,port=20,chassis=5,id=pci.5,bus=pcie.0,addr=0x2.0x4 \
-device pcie-root-port,port=21,chassis=6,id=pci.6,bus=pcie.0,addr=0x2.0x5 \
-device pcie-root-port,port=22,chassis=7,id=pci.7,bus=pcie.0,addr=0x2.0x6 \
-device pcie-root-port,port=23,chassis=8,id=pci.8,bus=pcie.0,addr=0x2.0x7 \
-device pcie-root-port,port=24,chassis=9,id=pci.9,bus=pcie.0,multifunction=on,addr=0x3 \
-device pcie-root-port,port=25,chassis=10,id=pci.10,bus=pcie.0,addr=0x3.0x1 \
-device pcie-root-port,port=26,chassis=11,id=pci.11,bus=pcie.0,addr=0x3.0x2 \
-device pcie-root-port,port=27,chassis=12,id=pci.12,bus=pcie.0,addr=0x3.0x3 \
-device pcie-root-port,port=28,chassis=13,id=pci.13,bus=pcie.0,addr=0x3.0x4 \
-device pcie-root-port,port=29,chassis=14,id=pci.14,bus=pcie.0,addr=0x3.0x5 \
-device nec-usb-xhci,id=usb,bus=pci.6,addr=0x0 \
-device virtio-scsi-pci,id=scsi0,bus=pci.5,addr=0x0 \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.4,addr=0x0 \
-blockdev '{"driver":"host_device","filename":"/dev/HostVG/QEMUGuest1","node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}' \
-blockdev '{"node-name":"libvirt-1-format","read-only":false,"driver":"raw","file":"libvirt-1-storage"}' \
-device virtio-blk-pci,scsi=off,bus=pci.7,addr=0x0,drive=libvirt-1-format,id=virtio-disk1,bootindex=1 \
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 18:38:47 +00:00
-fsdev local,security_model=passthrough,id=fsdev-fs0,path=/export/to/guest \
-device virtio-9p-pci,id=fs0,fsdev=fsdev-fs0,mount_tag=/import/from/host,bus=pci.1,addr=0x0 \
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 18:38:47 +00:00
-netdev user,id=hostnet0 \
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=00:11:22:33:44:55,bus=pci.2,addr=0x0 \
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 18:38:47 +00:00
-netdev user,id=hostnet1 \
-device e1000e,netdev=hostnet1,id=net1,mac=00:11:22:33:44:66,bus=pci.3,addr=0x0 \
-device virtio-input-host-pci,id=input0,evdev=/dev/input/event1234,bus=pci.10,addr=0x0 \
-device virtio-mouse-pci,id=input1,bus=pci.11,addr=0x0 \
-device virtio-keyboard-pci,id=input2,bus=pci.12,addr=0x0 \
-device virtio-tablet-pci,id=input3,bus=pci.13,addr=0x0 \
-audiodev '{"id":"audio1","driver":"none"}' \
-device virtio-vga,id=video0,max_outputs=1,bus=pcie.0,addr=0x1 \
-global ICH9-LPC.noreboot=off \
-watchdog-action reset \
-device virtio-balloon-pci,id=balloon0,bus=pci.8,addr=0x0 \
qemu: auto-add pcie-root-port/dmi-to-pci-bridge controllers as needed Previously libvirt would only add pci-bridge devices automatically when an address was requested for a device that required a legacy PCI slot and none was available. This patch expands that support to dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a machine with a pcie-root), and pcie-root-port (which is needed to add a hotpluggable PCIe device). It does *not* automatically add pcie-switch-upstream-ports or pcie-switch-downstream-ports (and currently there are no plans for that). Given the existing code to auto-add pci-bridge devices, automatically adding pcie-root-ports is fairly straightforward. The dmi-to-pci-bridge support is a bit tricky though, for a few reasons: 1) Although the only reason to add a dmi-to-pci-bridge is so that there is a reasonable place to plug in a pci-bridge controller, most of the time it's not the presence of a pci-bridge *in the config* that triggers the requirement to add a dmi-to-pci-bridge. Rather, it is the presence of a legacy-PCI device in the config, which triggers auto-add of a pci-bridge, which triggers auto-add of a dmi-to-pci-bridge (this is handled in virDomainPCIAddressSetGrow() - if there's a request to add a pci-bridge we'll check if there is a suitable bus to plug it into; if not, we first add a dmi-to-pci-bridge). 2) Once there is already a single dmi-to-pci-bridge on the system, there won't be a need for any more, even if it's full, as long as there is a pci-bridge with an open slot - you can also plug pci-bridges into existing pci-bridges. So we have to make sure we don't add a dmi-to-pci-bridge unless there aren't any dmi-to-pci-bridges *or* any pci-bridges. 3) Although it is strongly discouraged, it is legal for a pci-bridge to be directly plugged into pcie-root, and we don't want to auto-add a dmi-to-pci-bridge if there is already a pci-bridge that's been forced directly into pcie-root. Although libvirt will now automatically create a dmi-to-pci-bridge when it's needed, the code still remains for now that forces a dmi-to-pci-bridge on all domains with pcie-root (in qemuDomainDefAddDefaultDevices()). That will be removed in a future patch. For now, the pcie-root-ports are added one to a slot, which is a bit wasteful and means it will fail after 31 total PCIe devices (30 if there are also some PCI devices), but helps keep the changeset down for this patch. A future patch will have 8 pcie-root-ports sharing the functions on a single slot.
2016-09-19 18:38:47 +00:00
-object rng-random,id=objrng0,filename=/dev/urandom \
-device virtio-rng-pci,rng=objrng0,id=rng0,max-bytes=123,period=1234,bus=pci.9,addr=0x0 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=on