libvirt/.gitignore

213 lines
3.8 KiB
Plaintext
Raw Normal View History

*#*#
*.#*#
*.[187]
*.[187].in
2008-10-28 17:47:12 +00:00
*.a
*.cov
*.exe
*.exe.manifest
*.gcda
*.gcno
*.gcov
*.html
*.i
*.la
*.lo
*.loT
2008-10-28 17:47:12 +00:00
*.o
*.orig
*.pem
*.pyc
*.rej
*.s
*.service
*.socket
*.swp
2008-10-28 17:47:12 +00:00
*~
.#*
.color_coded
.deps
build: use automake subdir-objects Automake 2.0 will enable subdir-objects by default; in preparation for that change, automake 1.14 outputs LOADS of warnings: daemon/Makefile.am:38: warning: source file '../src/remote/remote_protocol.c' is in a subdirectory, daemon/Makefile.am:38: but option 'subdir-objects' is disabled automake-1.14: warning: possible forward-incompatibility. automake-1.14: At least a source file is in a subdirectory, but the 'subdir-objects' automake-1.14: automake option hasn't been enabled. For now, the corresponding output automake-1.14: object file(s) will be placed in the top-level directory. However, automake-1.14: this behaviour will change in future Automake versions: they will automake-1.14: unconditionally cause object files to be placed in the same subdirectory automake-1.14: of the corresponding sources. automake-1.14: You are advised to start using 'subdir-objects' option throughout your automake-1.14: project, to avoid future incompatibilities. daemon/Makefile.am:38: warning: source file '../src/remote/lxc_protocol.c' is in a subdirectory, daemon/Makefile.am:38: but option 'subdir-objects' is disabled ... As automake 1.9 also supported this option, and the previous patches fixed up the code base to work with it, it is safe to now turn it on unconditionally. * configure.ac (AM_INIT_AUTOMAKE): Enable subdir-objects. * .gitignore: Ignore .dirstamp directories. * src/Makefile.am (PDWTAGS, *-protocol-struct): Adjust to new subdir-object location of .lo files. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-07 22:18:06 +00:00
.dirstamp
2012-09-14 09:09:51 +00:00
.gdb_history
.git
.git-module-status
.libs
.lvimrc
.memdump
.sc-start-sc_*
.ycm_extra_conf.py
/AUTHORS
/GNUmakefile
/INSTALL
/NEWS
/aclocal.m4
/autom4te.cache
/build-aux/*
/build/
tests: add targets for building libvirt inside Docker containers The Travis CI system uses Docker containers for its build environment. These are pre-built and hosted under quay.io/libvirt so that developers can use them for reproducing problems locally. Getting the right Docker command syntax to use them, however, is not entirely easy. This patch addresses that usability issue by introducing some make targets. To run a simple build (aka 'make all') using the Fedora 28 container: make ci-build@fedora-28 To also run unit tests make ci-check@fedora-28 This is just syntax sugar for calling the previous command with a custom make target make ci-build@fedora-28 CI_MAKE_ARGS="check" To do a purely interactive build it is possible to request a shell make ci-shell@fedora-28 To do a MinGW build, it is currently possible to use the fedora-rawhide image and request a different configure script make ci-build@fedora-rawhide CI_CONFIGURE=mingw32-configure It is also possible to do cross compiled builds via the Debian containers make ci-build@debian-9-cross-s390x In all cases the GIT source tree is cloned locally into a 'ci-tree/src' sub-directory which is then exposed to the container at '/src'. It is setup to use a separate build directory so the build takes place in a subdir '/src/build'. A source tree build can be requested instead by passing an empty string CI_VPATH= arg to make. The make rules are kept in a standalone file that is included into the main Makefile.am, so that it is possible to run them without having to invoke autotools first. It is neccessary to disable the gnulib submodule commit check because this fails due to the way we have manually cloned submodule repos as primary git repos with their own .git directory, instead of letting git treat them as submodules in the top level .git directory. make[1]: Entering directory '/src/build' fatal: Not a valid object name origin fatal: run_command returned non-zero status for .gnulib . maint.mk: found non-public submodule commit make: *** [/src/maint.mk:1448: public-submodule-commit] Error 1 Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-01-25 16:28:23 +00:00
/ci-tree/
/confdefs.h
/config.cache
/config.guess
/config.h
/config.h.in
/config.log
/config.rpath
/config.status
/config.sub
/configure
/configure.lineno
/conftest.*
/docs/aclperms.htmlinc
/docs/apibuild.py.stamp
/docs/devhelp/libvirt.devhelp
/docs/hvsupport.html.in
/docs/libvirt-admin-*.xml
/docs/libvirt-api.xml
/docs/libvirt-lxc-*.xml
2013-01-15 12:30:30 +00:00
/docs/libvirt-qemu-*.xml
/docs/libvirt-refs.xml
/docs/news.html.in
/docs/todo.html.in
/examples/c/admin/client_close
/examples/c/admin/client_info
/examples/c/admin/client_limits
/examples/c/admin/list_clients
/examples/c/admin/list_servers
/examples/c/admin/logging
/examples/c/admin/threadpool_params
/examples/c/domain/dommigrate
/examples/c/domain/domtop
/examples/c/domain/info1
/examples/c/domain/rename
/examples/c/domain/suspend
/examples/c/misc/event-test
/examples/c/misc/hellolibvirt
/examples/c/misc/openauth
/gnulib/lib/*
/gnulib/m4/*
/gnulib/tests/*
/include/libvirt/libvirt-common.h
/libtool
/libvirt-*.tar.xz
/libvirt-[0-9]*
/libvirt*.pc
/libvirt.spec
/ltconfig
/ltmain.sh
/m4/*
/maint.mk
/mingw-libvirt.spec
/mkinstalldirs
/po/*gmo
po: minimize & canonicalize translations stored in git Similar to the libvirt.pot, .po files contain line numbers and file names identifying where in the source a translatable string comes from. The source locations in the .po files are thrown away and replaced with content from the libvirt.pot whenever msgmerge is run, so this is not precious information that needs to be stored in git. When msgmerge processes a .po file, it will add in any msgids from the libvirt.pot that were not already present. Thus, if a particular msgid currently has no translation, it can be considered redundant and again does not need storing in git. When msgmerge processes a .po file and can't find an exact existing translation match, it will try todo fuzzy matching instead, marking such entries with a "# fuzzy" comment to alert the translator to take a look and either discard, edit or accept the match. Looking at the existing fuzzy matches in .po files shows that the quality is awful, with many having a completely different set of printf format specifiers between the msgid and fuzzy msgstr entry. Fortunately when msgfmt generates the .gmo, the fuzzy entries are all ignored anyway. The fuzzy entries could be useful to translators if they were working on the .po files directly from git, but Libvirt outsourced translation to the Fedora Zanata system, so keeping fuzzy matches in git is not much help. Finally, by default msgids are sorted based on source location. Thus, if a bit of code with translatable text is moved from one file to another, it may shift around in the .po file, despite the msgid not itself changing. If the msgids were sorted alphabetically, the .po files would have stable ordering when code is refactored. This patch takes advantage of the above observations to canonicalize and minimize the content stored for .po files in git. Instead of storing the real .po files, we now store .mini.po files. The .mini.po files are the same file format as .po files, but have no source location comments, are sorted alphabetically, and all fuzzy msgstrs and msgids with no translation are discarded. This cuts the size of content in the po directory from 109MB to 19MB. Users working from a libvirt git checkout who need the full .po files can run "make update-po", which merges the libvirt.pot and .mini.po file to create a .po file containing all the content previously stored in git. Conversely if a full .po file has been modified, for example, by downloading new content from Zanata, the .mini.po files can be updated by running "make update-mini-po". The resulting diffs of the .mini.po file will clearly show the changed translations without any of the noise that previously obscured content. Being able to see content changes clearly actually identified a bug in the zanata python client where it was adding bogus "fuzzy" annotations to many messages: https://bugzilla.redhat.com/show_bug.cgi?id=1564497 Users working from libvirt releases should not see any difference in behaviour, since the tarballs only contain the full .po files, not the .mini.po files. As an added benefit, generating tarballs with "make dist", will no longer cause creation of dirty files in git, since it won't touch the .mini.po files, only the .po files which are no longer kept in git. To avoid creating a single commit 100+MB in size, each language is minimized separately in a following commit. Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-04 18:45:40 +00:00
/po/*po
!/po/*.mini.po
/po/*pot
/proxy/
/python/
/run
/sc_*
Make ESX & Hyper-V code generator safe with parallel builds If from a clean GIT checkout 'make -j 8' is run, the ESX and Hyper-V code will be generated multiple times over. This is because there are multiple files being generated from one invocation of the generator script. make does not realize this and so invokes the generator once per file. This doesn't matter with serialized builds, but with parallel builds multiple instances of the generator get run at once. make[2]: Entering directory `/home/berrange/src/virt/libvirt/src' GEN util/virkeymaps.h GEN remote/remote_protocol.h GEN remote/remote_client_bodies.h GEN remote/qemu_protocol.h GEN remote/qemu_client_bodies.h GEN esx/esx_vi_methods.generated.c GEN esx/esx_vi_methods.generated.h GEN esx/esx_vi_methods.generated.macro GEN esx/esx_vi_types.generated.c GEN esx/esx_vi_types.generated.h GEN esx/esx_vi_types.generated.typedef GEN esx/esx_vi_types.generated.typedef GEN esx/esx_vi_types.generated.typeenum GEN esx/esx_vi_types.generated.typetostring GEN esx/esx_vi_types.generated.typefromstring GEN esx/esx_vi_types.generated.h GEN esx/esx_vi_types.generated.c GEN esx/esx_vi_methods.generated.h GEN esx/esx_vi_methods.generated.c GEN esx/esx_vi_methods.generated.macro GEN esx/esx_vi.generated.h GEN esx/esx_vi.generated.c GEN esx/esx_vi_types.generated.typeenum GEN esx/esx_vi_types.generated.typedef GEN esx/esx_vi_types.generated.typeenum GEN esx/esx_vi_types.generated.typetostring GEN esx/esx_vi_types.generated.typefromstring GEN esx/esx_vi_types.generated.h GEN esx/esx_vi_types.generated.c GEN esx/esx_vi_methods.generated.h ...snip... GEN hyperv/hyperv_wmi.generated.h GEN libvirt_qemu_probes.h GEN locking/qemu-sanlock.conf GEN hyperv/hyperv_wmi.generated.c GEN rpc/virnetprotocol.h GEN hyperv/hyperv_wmi_classes.generated.typedef GEN hyperv/hyperv_wmi_classes.generated.h GEN hyperv/hyperv_wmi_classes.generated.c GEN rpc/virkeepaliveprotocol.h GEN remote/remote_protocol.c GEN remote/qemu_protocol.c GEN rpc/virkeepaliveprotocol.c GEN rpc/virnetprotocol.c GEN libvirt.def Prevent this using a timestamp file to control generation, as was previously done for the python bindings in commit a7868e0131516ef2dece82586edd52dc87fe336c Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-23 14:45:20 +00:00
/src/.*.stamp
/src/*.pc
/src/access/org.libvirt.api.policy
Auto-generate helpers for checking access control rules Extend the 'gendispatch.pl' script to be able to generate three new types of file. - 'aclheader' - defines signatures of helper APIs for doing authorization checks. There is one helper API for each API requiring an auth check. Any @acl annotations result in a method being generated with a suffix of 'EnsureACL'. If the ACL check requires examination of flags, an extra 'flags' param will be present. Some examples extern int virConnectBaselineCPUEnsureACL(void); extern int virConnectDomainEventDeregisterEnsureACL(virDomainDefPtr domain); extern int virDomainAttachDeviceFlagsEnsureACL(virDomainDefPtr domain, unsigned int flags); Any @aclfilter annotations resuilt in a method being generated with a suffix of 'CheckACL'. extern int virConnectListAllDomainsCheckACL(virDomainDefPtr domain); These are used for filtering individual objects from APIs which return a list of objects - 'aclbody' - defines the actual implementation of the methods described above. This calls into the access manager APIs. A complex example: /* Returns: -1 on error (denied==error), 0 on allowed */ int virDomainAttachDeviceFlagsEnsureACL(virConnectPtr conn, virDomainDefPtr domain, unsigned int flags) { virAccessManagerPtr mgr; int rv; if (!(mgr = virAccessManagerGetDefault())) return -1; if ((rv = virAccessManagerCheckDomain(mgr, conn->driver->name, domain, VIR_ACCESS_PERM_DOMAIN_WRITE)) <= 0) { virObjectUnref(mgr); if (rv == 0) virReportError(VIR_ERR_ACCESS_DENIED, NULL); return -1; } if (((flags & (VIR_DOMAIN_AFFECT_CONFIG|VIR_DOMAIN_AFFECT_LIVE)) == 0) && (rv = virAccessManagerCheckDomain(mgr, conn->driver->name, domain, VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) { virObjectUnref(mgr); if (rv == 0) virReportError(VIR_ERR_ACCESS_DENIED, NULL); return -1; } if (((flags & (VIR_DOMAIN_AFFECT_CONFIG)) == (VIR_DOMAIN_AFFECT_CONFIG)) && (rv = virAccessManagerCheckDomain(mgr, conn->driver->name, domain, VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) { virObjectUnref(mgr); if (rv == 0) virReportError(VIR_ERR_ACCESS_DENIED, NULL); return -1; } virObjectUnref(mgr); return 0; } - 'aclsyms' - generates a linker script to export the APIs to drivers. Some examples virConnectBaselineCPUEnsureACL; virConnectCompareCPUEnsureACL; Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-18 16:49:41 +00:00
/src/access/viraccessapicheck.c
/src/access/viraccessapicheck.h
/src/access/viraccessapichecklxc.c
/src/access/viraccessapichecklxc.h
/src/access/viraccessapicheckqemu.c
/src/access/viraccessapicheckqemu.h
/src/admin/admin_client.h
/src/admin/admin_protocol.[ch]
/src/admin/admin_server_dispatch_stubs.h
/src/esx/*.generated.*
/src/hyperv/*.generated.*
/src/libvirt*.def
/src/libvirt.syms
Auto-generate helpers for checking access control rules Extend the 'gendispatch.pl' script to be able to generate three new types of file. - 'aclheader' - defines signatures of helper APIs for doing authorization checks. There is one helper API for each API requiring an auth check. Any @acl annotations result in a method being generated with a suffix of 'EnsureACL'. If the ACL check requires examination of flags, an extra 'flags' param will be present. Some examples extern int virConnectBaselineCPUEnsureACL(void); extern int virConnectDomainEventDeregisterEnsureACL(virDomainDefPtr domain); extern int virDomainAttachDeviceFlagsEnsureACL(virDomainDefPtr domain, unsigned int flags); Any @aclfilter annotations resuilt in a method being generated with a suffix of 'CheckACL'. extern int virConnectListAllDomainsCheckACL(virDomainDefPtr domain); These are used for filtering individual objects from APIs which return a list of objects - 'aclbody' - defines the actual implementation of the methods described above. This calls into the access manager APIs. A complex example: /* Returns: -1 on error (denied==error), 0 on allowed */ int virDomainAttachDeviceFlagsEnsureACL(virConnectPtr conn, virDomainDefPtr domain, unsigned int flags) { virAccessManagerPtr mgr; int rv; if (!(mgr = virAccessManagerGetDefault())) return -1; if ((rv = virAccessManagerCheckDomain(mgr, conn->driver->name, domain, VIR_ACCESS_PERM_DOMAIN_WRITE)) <= 0) { virObjectUnref(mgr); if (rv == 0) virReportError(VIR_ERR_ACCESS_DENIED, NULL); return -1; } if (((flags & (VIR_DOMAIN_AFFECT_CONFIG|VIR_DOMAIN_AFFECT_LIVE)) == 0) && (rv = virAccessManagerCheckDomain(mgr, conn->driver->name, domain, VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) { virObjectUnref(mgr); if (rv == 0) virReportError(VIR_ERR_ACCESS_DENIED, NULL); return -1; } if (((flags & (VIR_DOMAIN_AFFECT_CONFIG)) == (VIR_DOMAIN_AFFECT_CONFIG)) && (rv = virAccessManagerCheckDomain(mgr, conn->driver->name, domain, VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) { virObjectUnref(mgr); if (rv == 0) virReportError(VIR_ERR_ACCESS_DENIED, NULL); return -1; } virObjectUnref(mgr); return 0; } - 'aclsyms' - generates a linker script to export the APIs to drivers. Some examples virConnectBaselineCPUEnsureACL; virConnectCompareCPUEnsureACL; Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-18 16:49:41 +00:00
/src/libvirt_access.syms
/src/libvirt_access.xml
Auto-generate helpers for checking access control rules Extend the 'gendispatch.pl' script to be able to generate three new types of file. - 'aclheader' - defines signatures of helper APIs for doing authorization checks. There is one helper API for each API requiring an auth check. Any @acl annotations result in a method being generated with a suffix of 'EnsureACL'. If the ACL check requires examination of flags, an extra 'flags' param will be present. Some examples extern int virConnectBaselineCPUEnsureACL(void); extern int virConnectDomainEventDeregisterEnsureACL(virDomainDefPtr domain); extern int virDomainAttachDeviceFlagsEnsureACL(virDomainDefPtr domain, unsigned int flags); Any @aclfilter annotations resuilt in a method being generated with a suffix of 'CheckACL'. extern int virConnectListAllDomainsCheckACL(virDomainDefPtr domain); These are used for filtering individual objects from APIs which return a list of objects - 'aclbody' - defines the actual implementation of the methods described above. This calls into the access manager APIs. A complex example: /* Returns: -1 on error (denied==error), 0 on allowed */ int virDomainAttachDeviceFlagsEnsureACL(virConnectPtr conn, virDomainDefPtr domain, unsigned int flags) { virAccessManagerPtr mgr; int rv; if (!(mgr = virAccessManagerGetDefault())) return -1; if ((rv = virAccessManagerCheckDomain(mgr, conn->driver->name, domain, VIR_ACCESS_PERM_DOMAIN_WRITE)) <= 0) { virObjectUnref(mgr); if (rv == 0) virReportError(VIR_ERR_ACCESS_DENIED, NULL); return -1; } if (((flags & (VIR_DOMAIN_AFFECT_CONFIG|VIR_DOMAIN_AFFECT_LIVE)) == 0) && (rv = virAccessManagerCheckDomain(mgr, conn->driver->name, domain, VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) { virObjectUnref(mgr); if (rv == 0) virReportError(VIR_ERR_ACCESS_DENIED, NULL); return -1; } if (((flags & (VIR_DOMAIN_AFFECT_CONFIG)) == (VIR_DOMAIN_AFFECT_CONFIG)) && (rv = virAccessManagerCheckDomain(mgr, conn->driver->name, domain, VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) { virObjectUnref(mgr); if (rv == 0) virReportError(VIR_ERR_ACCESS_DENIED, NULL); return -1; } virObjectUnref(mgr); return 0; } - 'aclsyms' - generates a linker script to export the APIs to drivers. Some examples virConnectBaselineCPUEnsureACL; virConnectCompareCPUEnsureACL; Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-18 16:49:41 +00:00
/src/libvirt_access_lxc.syms
/src/libvirt_access_lxc.xml
Auto-generate helpers for checking access control rules Extend the 'gendispatch.pl' script to be able to generate three new types of file. - 'aclheader' - defines signatures of helper APIs for doing authorization checks. There is one helper API for each API requiring an auth check. Any @acl annotations result in a method being generated with a suffix of 'EnsureACL'. If the ACL check requires examination of flags, an extra 'flags' param will be present. Some examples extern int virConnectBaselineCPUEnsureACL(void); extern int virConnectDomainEventDeregisterEnsureACL(virDomainDefPtr domain); extern int virDomainAttachDeviceFlagsEnsureACL(virDomainDefPtr domain, unsigned int flags); Any @aclfilter annotations resuilt in a method being generated with a suffix of 'CheckACL'. extern int virConnectListAllDomainsCheckACL(virDomainDefPtr domain); These are used for filtering individual objects from APIs which return a list of objects - 'aclbody' - defines the actual implementation of the methods described above. This calls into the access manager APIs. A complex example: /* Returns: -1 on error (denied==error), 0 on allowed */ int virDomainAttachDeviceFlagsEnsureACL(virConnectPtr conn, virDomainDefPtr domain, unsigned int flags) { virAccessManagerPtr mgr; int rv; if (!(mgr = virAccessManagerGetDefault())) return -1; if ((rv = virAccessManagerCheckDomain(mgr, conn->driver->name, domain, VIR_ACCESS_PERM_DOMAIN_WRITE)) <= 0) { virObjectUnref(mgr); if (rv == 0) virReportError(VIR_ERR_ACCESS_DENIED, NULL); return -1; } if (((flags & (VIR_DOMAIN_AFFECT_CONFIG|VIR_DOMAIN_AFFECT_LIVE)) == 0) && (rv = virAccessManagerCheckDomain(mgr, conn->driver->name, domain, VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) { virObjectUnref(mgr); if (rv == 0) virReportError(VIR_ERR_ACCESS_DENIED, NULL); return -1; } if (((flags & (VIR_DOMAIN_AFFECT_CONFIG)) == (VIR_DOMAIN_AFFECT_CONFIG)) && (rv = virAccessManagerCheckDomain(mgr, conn->driver->name, domain, VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) { virObjectUnref(mgr); if (rv == 0) virReportError(VIR_ERR_ACCESS_DENIED, NULL); return -1; } virObjectUnref(mgr); return 0; } - 'aclsyms' - generates a linker script to export the APIs to drivers. Some examples virConnectBaselineCPUEnsureACL; virConnectCompareCPUEnsureACL; Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-18 16:49:41 +00:00
/src/libvirt_access_qemu.syms
/src/libvirt_access_qemu.xml
/src/libvirt_admin.syms
/src/libvirt_*.stp
/src/libvirt_*helper
/src/libvirt_*probes.h
/src/libvirt_lxc
/src/libvirtd
/src/libvirtd*.logrotate
/src/locking/libxl-lockd.conf
/src/locking/libxl-sanlock.conf
/src/locking/lock_daemon_dispatch_stubs.h
/src/locking/lock_protocol.[ch]
/src/locking/qemu-lockd.conf
/src/locking/qemu-sanlock.conf
/src/locking/test_libvirt_sanlock.aug
/src/logging/log_daemon_dispatch_stubs.h
/src/logging/log_protocol.[ch]
Run an RPC protocol over the LXC controller monitor This defines a new RPC protocol to be used between the LXC controller and the libvirtd LXC driver. There is only a single RPC message defined thus far, an asynchronous "EXIT" event that is emitted just before the LXC controller process exits. This provides the LXC driver with details about how the container shutdown - normally, or abnormally (crashed), thus allowing the driver to emit better libvirt events. Emitting the event in the LXC controller requires a few little tricks with the RPC service. Simply calling the virNetServiceClientSendMessage does not work, since this merely queues the message for asynchronous processing. In addition the main event loop is no longer running at the point the event is emitted, so no I/O is processed. Thus after invoking virNetServiceClientSendMessage it is necessary to mark the client as being in "delayed close" mode. Then the event loop is run again, until the client completes its close - this happens only after the queued message has been fully transmitted. The final complexity is that it is not safe to run virNetServerQuit() from the client close callback, since that is invoked from a context where the server is locked. Thus a zero-second timer is used to trigger shutdown of the event loop, causing the controller to finally exit. * src/Makefile.am: Add rules for generating RPC protocol files and dispatch methods * src/lxc/lxc_controller.c: Emit an RPC event immediately before exiting * src/lxc/lxc_domain.h: Record the shutdown reason given by the controller * src/lxc/lxc_monitor.c, src/lxc/lxc_monitor.h: Register RPC program and event handler. Add callback to let driver receive EXIT event. * src/lxc/lxc_process.c: Use monitor exit event to decide what kind of domain event to emit * src/lxc/lxc_protocol.x: Define wire protocol for LXC controller monitor. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-17 14:54:08 +00:00
/src/lxc/lxc_controller_dispatch.h
/src/lxc/lxc_monitor_dispatch.h
/src/lxc/lxc_monitor_protocol.c
/src/lxc/lxc_monitor_protocol.h
/src/lxc/lxc_protocol.[ch]
/src/lxc/test_libvirtd_lxc.aug
/src/qemu/test_libvirtd_qemu.aug
/src/remote/*_client_bodies.h
/src/remote/*_protocol.[ch]
/src/remote/*_stubs.h
/src/rpc/virkeepaliveprotocol.[ch]
/src/rpc/virnetprotocol.[ch]
/src/test_libvirt*.aug
/src/test_virtlockd.aug
/src/test_virtlogd.aug
/src/util/virkeycodetable*.h
/src/util/virkeynametable*.h
/src/virt-aa-helper
/src/virtlockd
/src/virtlogd
/src/virt-guest-shutdown.target
/tests/*.log
/tests/*.pid
/tests/*.trs
/tests/*test
/tests/commandhelper
/tests/qemucapsprobe
!/tests/virsh-self-test
!/tests/virt-aa-helper-test
!/tests/virt-admin-self-test
/tests/objectlocking
/tests/objectlocking-files.txt
/tests/objectlocking.cm[ix]
/tests/reconnect
/tests/ssh
/tests/test_file_access.txt
/tests/test_conf
/tools/libvirt-guests.sh
/tools/virt-login-shell
/tools/virsh
/tools/virsh-*-edit.c
/tools/virt-admin
/tools/virt-*-validate
/tools/virt-sanlock-cleanup
/tools/wireshark/src/libvirt
/update.log
GPATH
GRTAGS
GTAGS
Makefile
2008-10-28 17:47:12 +00:00
Makefile.in
TAGS
2008-10-28 17:47:12 +00:00
coverage
cscope.files
cscope.in.out
cscope.out
cscope.po.out
2008-10-28 17:47:12 +00:00
results.log
stamp-h
stamp-h.in
stamp-h1
2012-10-31 15:47:34 +00:00
tags
!/build-aux/*.pl
!/gnulib/lib/Makefile.am
!/gnulib/tests/Makefile.am
!/m4/virt-*.m4