External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-11-05 04:41:20 +00:00
Code Issues Packages Projects Releases Wiki Activity
d8a8cae342
libvirt/po/POTFILES.in

296 lines
7.1 KiB
Plaintext
Raw Normal View History

admin: Introduce virAdmConnectGetLibVersion Introduce a new API to get libvirt version. It is worth noting, that libvirt-admin and libvirt share the same version number. Unfortunately, our existing API isn't generic enough to be used with virAdmConnectPtr as well. Also this patch wires up this API to the virt-admin client as a generic cmdVersion command.
2015-10-05 15:17:51 +00:00
daemon/admin_dispatch.h
admin: Move admin_server.{h,c} to admin.{h,c} This change is merely because admin_server would contain all the code from dispatchers and helpers to the actual APIs. Admin should have similar structure to the daemon-side remote driver - dispatchers and helpers in a separate module, APIs in a separate module. Best viewed with -M. Signed-off-by: Erik Skultety <eskultet@redhat.com> Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-10 10:39:33 +00:00
daemon/admin.c
daemon: Add libvirtd-config.c to the list of files to translate
2012-04-10 13:42:47 +00:00
daemon/libvirtd-config.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
daemon/libvirtd.c
Define remote wire protocol & impls for virDomainQemuAttach This tweaks the RPC generator to cope with some naming conventions used for the QEMU specific APIs * daemon/remote.c: Server side dispatcher * src/remote/remote_driver.c: Client side dispatcher * src/remote/qemu_protocol.x: Wire protocol definition * src/rpc/gendispatch.pl: Use '$structprefix' in method names, fix QEMU flags and fix dispatcher method names
2011-05-05 16:31:58 +00:00
daemon/qemu_dispatch.h
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
daemon/remote.c
build: update translated files The last patch was incomplete. The translated strings merely moved between generated file names, rather than disappearing. * cfg.mk (generated_files): Update generated file names. * po/POTFILES.in: Add remote_dispatch.h
2011-06-28 19:38:27 +00:00
daemon/remote_dispatch.h
Handle incoming data streams in libvirtd * daemon/stream.c: Handle incoming stream data packets, queuing until stream becomes writable. Handle stream completion handshake * po/POTFILES.in: Add daemon/stream.c
2009-08-24 19:53:48 +00:00
daemon/stream.c
build: translate generated strings Make sure that xgettext scans generated files for translatable strings, rather than just files stored in libvirt.git. * .gnulib: Update, for bootstrap and syntax-check fixes. * bootstrap: Resynchronize with gnulib. * cfg.mk (generated_files): Define. * po/POTFILES.in: Add more files with _().
2011-05-04 14:18:06 +00:00
gnulib/lib/gai_strerror.c
Pull in GNULIB regex module for benefit of test suite on Win32
2012-04-04 10:56:04 +00:00
gnulib/lib/regcomp.c
Add a policy kit access control driver Add an access control driver that uses the pkcheck command to check authorization requests. This is fairly inefficient, particularly for cases where an API returns a list of objects and needs to check permission for each object. It would be desirable to use the polkit API but this links to glib with abort-on-OOM behaviour, so can't be used. The other alternative is to speak to dbus directly Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-01-23 15:12:57 +00:00
src/access/viraccessdriverpolkit.c
Define basic internal API for access control This patch introduces the virAccessManagerPtr class as the interface between virtualization drivers and the access control drivers. The viraccessperm.h file defines the various permissions that will be used for each type of object libvirt manages Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-01-20 18:02:55 +00:00
src/access/viraccessmanager.c
bhyve: add a basic driver At this point it has a limited functionality and is highly experimental. Supported domain operations are: * define * start * destroy * dumpxml * dominfo It's only possible to have only one disk device and only one network, which should be of type bridge.
2014-02-18 10:08:10 +00:00
src/bhyve/bhyve_command.c
bhyve: implement PCI address allocation Automatically allocate PCI addresses for devices instead of hardcoding them in the driver code. The current allocation schema is to dedicate an entire slot for each devices. Also, allow having arbitrary number of devices.
2014-04-12 19:37:53 +00:00
src/bhyve/bhyve_device.c
bhyve: add a basic driver At this point it has a limited functionality and is highly experimental. Supported domain operations are: * define * start * destroy * dumpxml * dominfo It's only possible to have only one disk device and only one network, which should be of type bridge.
2014-02-18 10:08:10 +00:00
src/bhyve/bhyve_driver.c
drvbhyve: Automatically tear down guest domains on shutdown Reboot requires more sophistication and is left as a future work item -- but at least part of the plumbing is in place. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-11-14 16:03:30 +00:00
src/bhyve/bhyve_monitor.c
bhyve: add a basic driver At this point it has a limited functionality and is highly experimental. Supported domain operations are: * define * start * destroy * dumpxml * dominfo It's only possible to have only one disk device and only one network, which should be of type bridge.
2014-02-18 10:08:10 +00:00
src/bhyve/bhyve_process.c
caps: Add helpers to convert NUMA nodes to corresponding CPUs These helpers use the remembered host capabilities to retrieve the cpu map rather than query the host again. The intended usage for this helpers is to fix automatic NUMA placement with strict memory alloc. The code doing the prepare needs to pin the emulator process only to cpus belonging to a subset of NUMA nodes of the host.
2013-07-18 09:21:48 +00:00
src/conf/capabilities.c
Fixes syntax-check with previous commit * po/POTFILES.in: adds src/conf/cpu_conf.c in teh set of files with translatable content * src/conf/cpu_conf.c: remove an unused include
2009-12-18 13:50:04 +00:00
src/conf/cpu_conf.c
conf: move DevicePCIAddress functions to separate file Move the functions the parse/format, and validate PCI addresses to their own file so they can be conveniently used in other places besides device_conf.c Refactoring existing code without causing any functional changes to prepare for new code. This patch makes the code reusable. Signed-off-by: Shradha Shah <sshah@solarflare.com>
2012-08-16 15:41:06 +00:00
src/conf/device_conf.c
qemu: extract common PCI handling functions Move sharable PCI handling functions to domain_addr.[ch], and change theirs prefix from 'qemu' to 'vir': - virDomainPCIAddressAsString; - virDomainPCIAddressBusSetModel; - virDomainPCIAddressEnsureAddr; - virDomainPCIAddressFlagsCompatible; - virDomainPCIAddressGetNextSlot; - virDomainPCIAddressReleaseSlot; - virDomainPCIAddressReserveAddr; - virDomainPCIAddressReserveNextSlot; - virDomainPCIAddressReserveSlot; - virDomainPCIAddressSetFree; - virDomainPCIAddressSetGrow; - virDomainPCIAddressSlotInUse; - virDomainPCIAddressValidate; The only change here is function names, the implementation itself stays untouched. Extract common allocation code from DomainPCIAddressSetCreate into virDomainPCIAddressSetAlloc.
2014-05-13 16:10:40 +00:00
src/conf/domain_addr.c
Introduce domain_capabilities This new module holds and formats capabilities for emulator. If you are about to create a new domain, you may want to know what is the host or hypervisor capable of. To make sure we don't regress on the XML, the formatting is not something left for each driver to implement, rather there's general format function. The domain capabilities is a lockable object (even though the locking is not necessary yet) which uses reference counter. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-06-25 11:24:53 +00:00
src/conf/domain_capabilities.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/conf/domain_conf.c
events: Report errors on failure
2010-01-13 18:11:33 +00:00
src/conf/domain_event.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/conf/interface_conf.c
Split src/util/network.{c,h} into 5 pieces The src/util/network.c file is a dumping ground for many different APIs. Split it up into 5 pieces, along functional lines - src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs - src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs - src/util/virsocketaddr.c: virSocketAddr and APIs - src/conf/netdev_bandwidth_conf.c: XML parsing / formatting for virNetDevBandwidth - src/conf/netdev_vport_profile_conf.c: XML parsing / formatting for virNetDevVPortProfile * src/util/network.c, src/util/network.h: Split into 5 pieces * src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h, src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h, src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h, src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h, src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces * daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c, src/conf/domain_conf.h, src/conf/network_conf.c, src/conf/network_conf.h, src/conf/nwfilter_conf.h, src/esx/esx_util.h, src/network/bridge_driver.c, src/qemu/qemu_conf.c, src/rpc/virnetsocket.c, src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h, src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h, src/util/virnetdev.h, src/util/virnetdevtap.c, tools/virsh.c: Update include files
2011-11-02 15:40:08 +00:00
src/conf/netdev_bandwidth_conf.c
conf: add <vlan> element to network and domain interface elements The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
2012-08-12 07:51:30 +00:00
src/conf/netdev_vlan_conf.c
Split src/util/network.{c,h} into 5 pieces The src/util/network.c file is a dumping ground for many different APIs. Split it up into 5 pieces, along functional lines - src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs - src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs - src/util/virsocketaddr.c: virSocketAddr and APIs - src/conf/netdev_bandwidth_conf.c: XML parsing / formatting for virNetDevBandwidth - src/conf/netdev_vport_profile_conf.c: XML parsing / formatting for virNetDevVPortProfile * src/util/network.c, src/util/network.h: Split into 5 pieces * src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h, src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h, src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h, src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h, src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces * daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c, src/conf/domain_conf.h, src/conf/network_conf.c, src/conf/network_conf.h, src/conf/nwfilter_conf.h, src/esx/esx_util.h, src/network/bridge_driver.c, src/qemu/qemu_conf.c, src/rpc/virnetsocket.c, src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h, src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h, src/util/virnetdev.h, src/util/virnetdevtap.c, tools/virsh.c: Update include files
2011-11-02 15:40:08 +00:00
src/conf/netdev_vport_profile_conf.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/conf/network_conf.c
Move code related to network routes to networkcommon_conf.[ch] Moving code for parsing and formatting network routes to networkcommon_conf helps reusing those routes for domains. The route definition has been hidden to help reducing the number of unnecessary checks in the format function.
2015-01-14 13:21:10 +00:00
src/conf/networkcommon_conf.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/conf/node_device_conf.c
conf: Move numatune_conf to numa_conf For a while now there are two places that gather information about NUMA related guest configuration. While the XML can't be changed we can at least store the data in one place in the definition. Rename the numatune_conf.[ch] files to numa_conf as later patches will move the rest of the definitions from the cpu definition to this one.
2015-02-11 09:08:35 +00:00
src/conf/numa_conf.c
Add XML parser extensions for network filtering This patch adds XML processing for the network filter schema and extends the domain XML processing to parse the top level referenced filter along with potentially provided parameters Signed-off-by: Stefan Berger <stefanb@us.ibm.com> Signed-off-by: Gerhard Stenzel <gerhard.stenzel@de.ibm.com>
2010-03-25 17:46:07 +00:00
src/conf/nwfilter_conf.c
src/conf/nwfilter_params.c
Extracted common parts of domain_event.[ch] to object_event.[ch]
2013-11-26 14:10:15 +00:00
src/conf/object_event.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/conf/secret_conf.c
snapshot: split snapshot conf code into own file This has several benefits: 1. Future snapshot-related code has a definite place to go (and I _will_ be adding some) 2. Snapshot errors now use the VIR_FROM_DOMAIN_SNAPSHOT error classification, which has been underutilized (previously only in libvirt.c) * src/conf/domain_conf.h, domain_conf.c: Split... * src/conf/snapshot_conf.h, snapshot_conf.c: ...into new files. * src/Makefile.am (DOMAIN_CONF_SOURCES): Build new files. * po/POTFILES.in: Mark new file for translation. * src/vbox/vbox_tmpl.c: Update caller. * src/esx/esx_driver.c: Likewise. * src/qemu/qemu_command.c: Likewise. * src/qemu/qemu_domain.h: Likewise.
2012-08-14 00:09:12 +00:00
src/conf/snapshot_conf.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/conf/storage_conf.c
conf: Rename virconsole.* to virchrdev.* This is just code motion, in preparation to rename identifiers to be less console-specific.
2013-01-02 15:38:51 +00:00
src/conf/virchrdev.c
conf: Split virDomainObjList into a separate file Our domain_conf.* files are big enough. Not only they contain XML parsing code, but they served as a storage of all functions whose name is virDomain prefixed. This is just wrong as it gathers not related functions (and modules) into one big file which is then harder to maintain. Split virDomainObjList module into a separate file called virdomainobjlist.[ch]. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-07-17 09:11:23 +00:00
src/conf/virdomainobjlist.c
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
src/cpu/cpu.c
Add cpu_generic.c to the list of translated files Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2010-02-11 15:27:14 +00:00
src/cpu/cpu_generic.c
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
src/cpu/cpu_map.c
cpu: Rename {powerpc,ppc} => ppc64 (filesystem) The driver only supports VIR_ARCH_PPC64 and VIR_ARCH_PPC64LE. Just shuffling files around and updating the build system accordingly. No functional changes.
2015-07-20 12:17:52 +00:00
src/cpu/cpu_ppc64.c
Adds CPU selection infrastructure Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
2009-12-18 15:02:11 +00:00
src/cpu/cpu_x86.c
maint: update po/POTFILES.in * po/POTFILES.in: Add 3 files.
2010-05-20 06:59:01 +00:00
src/driver.c
esx: Mark error messages for translation Also define ESX_ERROR and ESX_VI_ERROR in a central place, instead of defining them in each source file. Add ESX_ERROR and ESX_VI_ERROR to the msg_gen_function list in cfg.mk. Update po/POTFILES.in accordingly.
2010-04-02 19:34:31 +00:00
src/esx/esx_driver.c
esx: Implement network driver An ESX server has one or more PhysicalNics that represent the actual hardware NICs. Those can be listed via the interface driver. A libvirt virtual network is mapped to a HostVirtualSwitch. On the physical side a HostVirtualSwitch can be connected to PhysicalNics. On the virtual side a HostVirtualSwitch has HostPortGroups that are mapped to libvirt virtual network's portgroups. Typically there is HostPortGroups named 'VM Network' that is used to connect virtual machines to a HostVirtualSwitch. A second HostPortGroup typically named 'Management Network' is used to connect the hypervisor itself to the HostVirtualSwitch. This one is not mapped to a libvirt virtual network's portgroup. There can be more HostPortGroups than those typical two on a HostVirtualSwitch. +---------------+-------------------+ ...---| | | +-------------+ | HostPortGroup | |---| PhysicalNic | | VM Network | | | vmnic0 | ...---| | | +-------------+ +---------------+ HostVirtualSwitch | | vSwitch0 | +---------------+ | | HostPortGroup | | ...---| Management | | | Network | | +---------------+-------------------+ The virtual counterparts of the PhysicalNic is the HostVirtualNic for the hypervisor and the VirtualEthernetCard for the virtual machines that are grouped into HostPortGroups. +---------------------+ +---------------+---... | VirtualEthernetCard |---| | +---------------------+ | HostPortGroup | +---------------------+ | VM Network | | VirtualEthernetCard |---| | +---------------------+ +---------------+ | +---------------+ +---------------------+ | HostPortGroup | | HostVirtualNic |---| Management | +---------------------+ | Network | +---------------+---... The currently implemented network driver can list, define and undefine HostVirtualSwitches including HostPortGroups for virtual machines. Existing HostVirtualSwitches cannot be edited yet. This will be added in a followup patch.
2012-08-05 20:11:50 +00:00
src/esx/esx_network_driver.c
Add iSCSI backend storage driver for ESX The patch adds the backend driver to support iSCSI format storage pools and volumes for ESX host. The mapping of ESX iSCSI specifics to Libvirt is as follows: 1. ESX static iSCSI target <------> Libvirt Storage Pools 2. ESX iSCSI LUNs <------> Libvirt Storage Volumes. The above understanding is based on http://libvirt.org/storage.html. The operation supported on iSCSI pools includes: 1. List storage pools & volumes. 2. Get XML descriptor operaion on pools & volumes. 3. Lookup operation on pools & volumes by name, UUID and path (if applicable). iSCSI pools does not support operations such as: Create / remove pools and volumes.
2012-11-10 07:18:08 +00:00
src/esx/esx_storage_backend_iscsi.c
Refactor ESX storage driver to implement facade pattern The patch refactors the current ESX storage driver due to following reasons: 1. Given most of the public APIs exposed by the storage driver in Libvirt remains same, ESX storage driver should not implement logic specific for only one supported format (current implementation only supports VMFS). 2. Decoupling interface from specific storage implementation gives us an extensible design to hook implementation for other supported storage formats. This patch refactors the current driver to implement it as a facade pattern i.e. the driver exposes all the public libvirt APIs, but uses backend drivers to get the required task done. The backend drivers provide implementation specific to the type of storage device. File changes: ------------------ esx_storage_driver.c ----> esx_storage_driver.c (base storage driver) | |---> esx_storage_backend_vmfs.c (VMFS backend)
2012-11-10 07:18:07 +00:00
src/esx/esx_storage_backend_vmfs.c
esx: Add read-only storage pool access Allows listing existing pools and requesting information about them. Alter the esxVI_ProductVersion enum in a way that allows to check for product type by masking.
2010-05-18 16:11:59 +00:00
src/esx/esx_storage_driver.c
esx: Add libcurl based stream driver This allows to implement libvirt functions that use streams, such as virDoaminScreenshot, without the need to store the downloaded data in a temporary file first. The stream driver directly interacts with libcurl to send and receive data. The driver uses the libcurl multi interface that allows to do a transfer in multiple curl_multi_perform() calls. The easy interface would do the whole transfer in a single curl_easy_perform() call. This doesn't work with the libvirt stream API that is driven by multiple calls to the virStreamSend() and virStreamRecv() functions. The curl_multi_wait() function is used to do blocking operations. But it was added in libcurl 7.28.0. For older versions it is emulated using the socket callback of the multi interface. The current driver only supports blocking operations. There is already some code in place for non-blocking mode but it is not complete.
2014-03-30 18:37:00 +00:00
src/esx/esx_stream.c
esx: Mark error messages for translation Also define ESX_ERROR and ESX_VI_ERROR in a central place, instead of defining them in each source file. Add ESX_ERROR and ESX_VI_ERROR to the msg_gen_function list in cfg.mk. Update po/POTFILES.in accordingly.
2010-04-02 19:34:31 +00:00
src/esx/esx_util.c
src/esx/esx_vi.c
src/esx/esx_vi_methods.c
src/esx/esx_vi_types.c
Add a generic internal API for handling any FD based stream To avoid the need for duplicating implementations of virStream drivers, provide a generic implementation that can handle any FD based stream. This code is copied from the existing impl in the QEMU driver, with the locking moved into the stream impl, and addition of a read callback The FD stream code will refuse to operate on regular files or block devices, since those can't report EAGAIN properly when they would block on I/O * include/libvirt/virterror.h, include/libvirt/virterror.h: Add VIR_FROM_STREAM error domain * src/qemu/qemu_driver.c: Remove code obsoleted by the new generic streams driver. * src/fdstream.h, src/fdstream.c, src/fdstream.c, src/libvirt_private.syms: Generic reusable FD based streams
2010-09-22 18:32:21 +00:00
src/fdstream.c
hyperv: Add driver skeleton
2011-07-13 14:47:01 +00:00
src/hyperv/hyperv_driver.c
hyperv: Add basic driver for Microsoft Hyper-V Domain listing, basic information retrieval and domain life cycle management is implemented. But currently the domain XML output lacks the complete devices section. The driver uses OpenWSMAN to directly communicate with a Hyper-V server over its WS-Management interface exposed via Microsoft WinRM. The driver is based on the work of Michael Sievers. This started in the same master program project group at the University of Paderborn as the ESX driver. See Michael's blog for details: http://hyperv4libvirt.wordpress.com/
2011-07-13 15:16:47 +00:00
src/hyperv/hyperv_util.c
hyperv: Add OpenWSMAN based client for the Hyper-V WMI API Add a generator script to generate the structs and serialization information for OpenWSMAN. openwsman.h collects workarounds for problems in OpenWSMAN <= 2.2.6. There are also disabled sections that would use ws_serializer_free_mem but can't because it's broken in OpenWSMAN <= 2.2.6. Patches to fix this have been posted upstream.
2011-07-13 15:05:19 +00:00
src/hyperv/hyperv_wmi.c
build: define WITH_INTERFACE for the driver Based exclusively on work by Eric Blake in a patch posted with the same subject. However some modifications related to comments and my plans to add another backend. Added WITH_INTERFACE as the only automake variable deciding whether to build the driver and using WITH_NETCF to identify that we're wanting to use the netcf library as the backend. * configure.ac: Added with_interface * src/interface/netcf_driver.c: Renamed.. * src/interface/interface_backend_netcf.c: ..to this to match storage. * src/interface/netcf_driver.h: Renamed.. * src/interface/interface_driver.h: ..to this. * daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF. * libvirt.spec.in: Add RPM support for --with-interface
2012-09-18 01:27:06 +00:00
src/interface/interface_backend_netcf.c
interface: add udev based backend for virInterface Add a read-only udev based backend for virInterface. Useful for distros that do not have netcf support yet. Multiple libvirt based utilities use a HAL based fallback when virInterface is not available which is less than ideal. This implements: * virConnectNumOfInterfaces() * virConnectListInterfaces() * virConnectNumOfDefinedInterfaces() * virConnectListDefinedInterfaces() * virConnectListAllInterfaces() * virConnectInterfaceLookupByName() * virConnectInterfaceLookupByMACString()
2012-10-06 19:20:25 +00:00
src/interface/interface_backend_udev.c
Mark internal.h for translation
2010-04-16 17:21:10 +00:00
src/internal.h
Enable the po-check test; fix violations. * Makefile.cfg (local-checks-to-skip) [po-check]: Enable. * po/POTFILES.in: Add three file names. Sort.
2008-01-29 18:19:46 +00:00
src/libvirt.c
Add libvirt-admin library Initial scratch of the admin library. It has its own virAdmConnectPtr that inherits from virAbstractConnectPtr and thus trivially supports error reporting. There's pkg-config file added and spec-file adjusted as well. Since the library should be "minimalistic" and not depend on any other library, the list of files is especially crafted for it. Most of them could've been put to it's own sub-libraries that would be LIBADD'd to libvirt_util, libvirt_net_rpc and libvirt_setuid_rpc_client to minimize the number of object files being built, but that's a refactoring that isn't the orginal aim of this commit. Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-04-15 14:16:24 +00:00
src/libvirt-admin.c
Move virDomain related APIs out of libvirt.c Introduce a src/libvirt-domain.c file to hold all the methods related to the virDomain type.
2014-10-22 15:29:09 +00:00
src/libvirt-domain.c
Move virDomainSnapshot related APIs out of libvirt.c Introduce a src/libvirt-domain-snapshot.c file to hold all the methods related to the virDomainSnapshot type.
2014-10-22 15:29:09 +00:00
src/libvirt-domain-snapshot.c
Move virConnect/virNode related APIs out of libvirt.c Introduce a src/libvirt-host.c file to hold all the methods related to the virConnect type.
2014-10-22 15:29:09 +00:00
src/libvirt-host.c
Apply security label when entering LXC namespaces Add a new virDomainLxcEnterSecurityLabel() function as a counterpart to virDomainLxcEnterNamespaces(), which can change the current calling process to have a new security context. This call runs client side, not in libvirtd so we can't use the security driver infrastructure. When entering a namespace, the process spawned from virsh will default to running with the security label of virsh. The actual desired behaviour is to run with the security label of the container most of the time. So this changes virsh lxc-enter-namespace command to invoke the virDomainLxcEnterSecurityLabel method. The current behaviour is: LABEL PID TTY TIME CMD system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 29 ? 00:00:00 dhclient staff_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 47 ? 00:00:00 ps Note the ps command is running as unconfined_t, After this patch, The new behaviour is this: virsh -c lxc:/// lxc-enter-namespace dan -- /bin/ps -eZ LABEL PID TTY TIME CMD system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 32 ? 00:00:00 dhclient system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 38 ? 00:00:00 ps The '--noseclabel' flag can be used to skip security labelling. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-12 17:24:01 +00:00
src/libvirt-lxc.c
Move virNetwork related APIs out of libvirt.c Introduce a src/libvirt-network.c file to hold all the methods related to the virNetwork type.
2014-10-22 15:29:09 +00:00
src/libvirt-network.c
Move virNWFilter related APIs out of libvirt.c Introduce a src/libvirt-nwfilter.c file to hold all the methods related to the virNWFilter type.
2014-10-22 15:29:09 +00:00
src/libvirt-nwfilter.c
Move virSecret related APIs out of libvirt.c Introduce a src/libvirt-secret.c file to hold all the methods related to the virSecret type.
2014-10-22 15:29:09 +00:00
src/libvirt-secret.c
Move virStorage{Pool,Vol} related APIs out of libvirt.c Introduce a src/libvirt-storage.c file to hold all the methods related to the virStorage{Pool,Vol} types.
2014-10-22 15:29:09 +00:00
src/libvirt-storage.c
Move virStream related APIs out of libvirt.c Introduce a src/libvirt-stream.c file to hold all the methods related to the virStream type.
2014-10-22 15:29:09 +00:00
src/libvirt-stream.c
Santize the reporting of VIR_ERR_INVALID_ERROR To ensure consistent error reporting of invalid arguments, provide a number of predefined helper methods & macros. - An arg which must not be NULL: virCheckNonNullArgReturn(argname, retvalue) virCheckNonNullArgGoto(argname, label) - An arg which must be NULL virCheckNullArgGoto(argname, label) - An arg which must be positive (ie 1 or greater) virCheckPositiveArgGoto(argname, label) - An arg which must not be 0 virCheckNonZeroArgGoto(argname, label) - An arg which must be zero virCheckZeroArgGoto(argname, label) - An arg which must not be negative (ie 0 or greater) virCheckNonNegativeArgGoto(argname, label) * src/libvirt.c, src/libvirt-qemu.c, src/nodeinfo.c, src/datatypes.c: Update to use virCheckXXXX macros * po/POTFILES.in: Add libvirt-qemu.c and virterror_internal.h * src/internal.h: Define macros for checking invalid args * src/util/virterror_internal.h: Define macros for reporting invalid args Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-25 17:41:07 +00:00
src/libvirt-qemu.c
Introduce basic infrastructure for virtlockd daemon The virtlockd daemon will maintain locks on behalf of libvirtd. There are two reasons for it to be separate - Avoid risk of other libvirtd threads accidentally releasing fcntl() locks by opening + closing a file that is locked - Ensure locks can be preserved across libvirtd restarts. virtlockd will need to be able to re-exec itself while maintaining locks. This is simpler to achieve if its sole job is maintaining locks Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-08-02 19:06:50 +00:00
src/locking/lock_daemon.c
src/locking/lock_daemon_config.c
Implement dispatch functions for lock protocol in virtlockd Introduce a lock_daemon_dispatch.c file which implements the server side dispatcher the RPC APIs previously defined in the lock protocol. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-08-03 09:27:07 +00:00
src/locking/lock_daemon_dispatch.c
Add a virtlockd client as a lock driver impl This adds a 'lockd' lock driver which is just a client which talks to the lockd daemon to perform all locking. This will be the default lock driver for any hypervisor which needs one. * src/Makefile.am: Add lockd.so plugin * src/locking/lock_driver_lockd.c: Lockd driver impl Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2011-07-06 16:30:08 +00:00
src/locking/lock_driver_lockd.c
Add a plugin for the 'sanlock' project Sanlock is a project that implements a disk-paxos locking algorithm. This is suitable for cluster deployments with shared storage. * src/Makefile.am: Add dlopen plugin for sanlock * src/locking/lock_driver_sanlock.c: Sanlock driver * configure.ac: Check for sanlock * libvirt.spec.in: Add a libvirt-lock-sanlock RPM
2011-01-18 18:37:45 +00:00
src/locking/lock_driver_sanlock.c
Basic framework for lock manager plugins Define the basic framework lock manager plugins. The basic plugin API for 3rd parties to implemented is defined in src/locking/lock_driver.h This allows dlopen()able modules for alternative locking schemes, however, we do not install the header. This requires lock plugins to be in-tree allowing changing of the lock manager plugin API in future. The libvirt code for loading & calling into plugins is in src/locking/lock_manager.{c,h} * include/libvirt/virterror.h, src/util/virterror.c: Add VIR_FROM_LOCKING * src/locking/lock_driver.h: API for lock driver plugins to implement * src/locking/lock_manager.c, src/locking/lock_manager.h: Internal API for managing locking * src/Makefile.am: Add locking code
2010-09-13 13:02:58 +00:00
src/locking/lock_manager.c
locking: Implement lock failure action in sanlock driver While the changes to sanlock driver should be stable, the actual implementation of sanlock_helper is supposed to be replaced in the future. However, before we can implement a better sanlock_helper, we need an administrative interface to libvirtd so that the helper can just pass a "leases lost" event to the particular libvirt driver and everything else will be taken care of internally. This approach will also allow libvirt to pass such event to applications and use appropriate reasons when changing domain states. The temporary implementation handles all actions directly by calling appropriate libvirt APIs (which among other things means that it needs to know the credentials required to connect to libvirtd).
2012-09-18 11:41:26 +00:00
src/locking/sanlock_helper.c
Import stripped down virtlockd code as basis of virtlogd Copy the virtlockd codebase across to form the initial virlogd code. Simple search & replace of s/lock/log/ and gut the remote protocol & dispatcher. This gives us a daemon that starts up and listens for connections, but does nothing with them. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-02-09 16:35:05 +00:00
src/logging/log_daemon.c
src/logging/log_daemon_config.c
logging: introduce log handling protocol Define a new RPC protocol for the virtlogd daemon that provides for handling of logs. The initial RPC method defined allows a client to obtain a file handle to use for writing to a log file for a guest domain. The file handle passed back will not actually refer to the log file, but rather an anonymous pipe. The virtlogd daemon will forward I/O between them, ensuring file rotation happens when required. Initially the log setup is hardcoded to cap log files at 128 KB, and keep 3 backups when rolling over, which gives a max usage of 512 KB per guest. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-03 11:01:21 +00:00
src/logging/log_daemon_dispatch.c
src/logging/log_handler.c
logging: add client for virtlogd daemon Add the virLogManager API which allows for communication with the virtlogd daemon to RPC program. This provides the client side API to open log files for guest domains. The virtlogd daemon is setup to auto-spawn on first use when running unprivileged. For privileged usage, systemd socket activation is used instead. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-03 11:09:25 +00:00
src/logging/log_manager.c
Move cgroup setup code out of lxc_controller.c Move the cgroup setup code out of the lxc_controller.c file and into lxc_cgroup.{c,h}. This reduces the size of the lxc_controller.c file and paves the way to invoke cgroup setup from lxc_driver.c instead of lxc_controller.c in the future Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-13 11:21:27 +00:00
src/lxc/lxc_cgroup.c
add fuse support for libvirt lxc this patch addes fuse support for libvirt lxc. we can use fuse filesystem to generate sysinfo dynamically, So we can isolate /proc/meminfo,cpuinfo and so on through fuse filesystem. we mount fuse filesystem for every container. the mount name is libvirt,mount point is localstatedir/run/libvirt/lxc/containername. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
2012-11-14 09:39:04 +00:00
src/lxc/lxc_fuse.c
Add support for USB host device passthrough with LXC This adds support for host device passthrough with the LXC driver. Since there is only a single kernel image, it doesn't make sense to pass through PCI devices, but USB devices are fine. For the latter we merely need to make the /dev/bus/usb/NNN/MMM character device exist in the container's /dev Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-23 14:46:18 +00:00
src/lxc/lxc_hostdev.c
LXC driver: started implementing connectDomainXMLFromNative This function aims at converting LXC configuration into a libvirt domain XML description to help users migrate from LXC to libvirt. Here is an example of how the lxc configuration works: virsh -c lxc:/// domxml-from-native lxc-tools /var/lib/lxc/migrate_test/config It is possible that some parts couldn't be properly mapped into a domain XML fragment, so users should carefully review the result before creating the domain. fstab files in lxc.mount lines will need to be merged into the configuration file as lxc.mount.entry. As we can't know the amount of memory of the host, we have to set a default value for max_balloon that users will probably want to adjust.
2014-02-05 14:10:00 +00:00
src/lxc/lxc_native.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/lxc/lxc_container.c
Expose a host UUID in the capabilities XML Allow for a host UUID in the capabilities XML. Local drivers will initialize this from the SMBIOS data. If a sanity check shows SMBIOS uuid is invalid, allow an override from the libvirtd.conf configuration file * daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid configuration option * docs/schemas/capability.rng: Add optional host uuid field * src/conf/capabilities.c, src/conf/capabilities.h: Include host UUID in XML * src/libvirt_private.syms: Export new uuid.h functions * src/lxc/lxc_conf.c, src/qemu/qemu_driver.c, src/uml/uml_conf.c: Set host UUID in capabilities * src/util/uuid.c, src/util/uuid.h: Support for host UUIDs * src/node_device/node_device_udev.c: Use the host UUID functions * tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add new host_uuid config option to test
2010-05-25 14:33:51 +00:00
src/lxc/lxc_conf.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/lxc/lxc_controller.c
lxc: Inherit namespace feature This patch adds feature for lxc containers to inherit namespaces. This is very similar to what lxc-tools or docker provides. Look for "man lxc-start" and you will find that you can pass command args as [ --share-[net|ipc|uts] name|pid ]. Or check out docker networking option in which you can give --net=container:NAME_or_ID as an option for sharing +namespace. >From this patch you can add extra libvirt option to share namespace in following way. <lxc:namespace> <lxc:sharenet type='netns' value='red'/> <lxc:shareipc type='pid' value='12345'/> <lxc:shareuts type='name' value='container1'/> </lxc:namespace> The netns option is specific to sharenet. It can be used to inherit from existing network namespace. Co-authored: Daniel P. Berrange <berrange@redhat.com>
2015-08-20 13:46:17 +00:00
src/lxc/lxc_domain.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/lxc/lxc_driver.c
Move LXC process management code into separate file Move all the code that manages stop/start of LXC processes into separate lxc_process.{c,h} file to make the lxc_driver.c file smaller Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-13 11:39:29 +00:00
src/lxc/lxc_process.c
libxl: Introduce libxl_domain.[ch] Create libxl_domain.[ch] and move all functions operating on libxlDomainObjPrivate to these files. This will be useful for future patches that e.g. add job support for libxlDomainObjPrivate.
2013-08-30 17:18:31 +00:00
src/libxl/libxl_domain.c
Add libxenlight driver Add a new xen driver based on libxenlight [1], which is the primary toolstack starting with Xen 4.1.0. The driver is stateful and runs privileged only. Like the existing xen-unified driver, the libxenlight driver is accessed with xen:// URI. Driver selection is based on the status of xend. If xend is running, the libxenlight driver will not load and xen:// connections are handled by xen-unified. If xend is not running *and* the libxenlight driver is available, xen:// connections are deferred to the libxenlight driver. V6: - Address several code style issues noted by Daniel Veillard - Make drive work with xen:/// URI - Hold domain object reference while domain is injected in libvirt event loop. Race found and fixed by Markus Groß. V5: - Ensure events are unregistered when domain private data is destroyed. Discovered and fixed by Markus Groß. V4: - Handle restart of libvirtd, reconnecting to previously started domains - Rebased to current master - Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0) V3: - Reserve vnc port within driver when autoport=yes V2: - Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81) - Rebased to current master - Plug memory leaks found by Stefano Stabellini and valgrind - Handle SHUTDOWN_crash domain death event [1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
2011-02-10 22:42:34 +00:00
src/libxl/libxl_driver.c
src/libxl/libxl_conf.c
libxl: add migration support This patch adds initial migration support to the libxl driver, using the VIR_DRV_FEATURE_MIGRATION_PARAMS family of migration functions. Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2014-05-08 21:56:51 +00:00
src/libxl/libxl_migration.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/network/bridge_driver.c
bridge driver: extract platform specifics * Move platform specific things (e.g. firewalling and route collision checks) into bridge_driver_platform * Create two platform specific implementations: - bridge_driver_linux: Linux implementation using iptables, it's actually the code moved from bridge_driver.c - bridge_driver_nop: dumb implementation that does nothing Signed-off-by: Eric Blake <eblake@redhat.com>
2013-07-24 12:22:54 +00:00
src/network/bridge_driver_linux.c
Add helper program to create custom leases Introduce helper program to catch events from dnsmasq and maintain a custom lease file per network. It supports dhcpv4 and dhcpv6. The file is saved as "<interface-name>.status". Each lease contains the following info: <expiry-time (epoch time)> <mac> <iaid> <ip-address> <hostname> <clientid> Example of custom leases file content: [ { "iaid": "1221229", "ip-address": "2001:db8:ca2:2:1::95", "mac-address": "52:54:00:12:a2:6d", "hostname": "Fedora20", "client-id": "00:04:1a:c1:d9:6b:5a:0a:e2:bc:f8:4b:1e:37:2e:38:22:55", "expiry-time": 1393244216 }, { "ip-address": "192.168.150.208", "mac-address": "52:54:00:11:56:b3", "hostname": "Wani-PC", "client-id": "01:52:54:00:11:56:b3", "expiry-time": 1393244248 } ] src/Makefile.am: * Add options to compile the helper program src/network/bridge_driver.c: * Introduce networkDnsmasqLeaseFileNameCustom() * Invoke helper program along with dnsmasq * Delete the .status file when corresponding n/w is destroyed. src/network/leaseshelper.c * Helper program to create the custom lease file
2014-06-02 10:19:26 +00:00
src/network/leaseshelper.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/node_device/node_device_driver.c
maint: update po/POTFILES.in * po/POTFILES.in: Add 3 files.
2010-05-20 06:59:01 +00:00
src/node_device/node_device_hal.c
Implement a node device backend using libudev * configure.in: add new --with-udev, disabled by default, and requiring libudev > 145 * src/node_device/node_device_udev.c src/node_device/node_device_udev.h: the new node device backend * src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c to a better file name * src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple of fields in node device definitions, and an API to look them up, remove a couple of unused fields from previous patch. * src/node_device/node_device_driver.c src/node_device/node_device_driver.h: plug the new driver * po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new files and symbols * src/util/util.h src/util/util.c: add a new convenience macro virBuildPath and virBuildPathInternal() function
2009-11-12 21:48:24 +00:00
src/node_device/node_device_udev.c
Make error reporting threadsafe by avoiding strerror
2009-01-20 17:13:33 +00:00
src/nodeinfo.c
nwfilter: add DHCP snooping This patch adds DHCP snooping support to libvirt. The learning method for IP addresses is specified by setting the "CTRL_IP_LEARNING" variable to one of "any" [default] (existing IP learning code), "none" (static only addresses) or "dhcp" (DHCP snooping). Active leases are saved in a lease file and reloaded on restart or HUP. The following interface XML activates and uses the DHCP snooping: <interface type='bridge'> <source bridge='virbr0'/> <filterref filter='clean-traffic'> <parameter name='CTRL_IP_LEARNING' value='dhcp'/> </filterref> </interface> All filters containing the variable 'IP' are automatically adjusted when the VM receives an IP address via DHCP. However, multiple IP addresses per interface are silently ignored in this patch, thus only supporting one IP address per interface. Multiple IP address support is added in a later patch in this series. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2012-06-01 23:32:06 +00:00
src/nwfilter/nwfilter_dhcpsnoop.c
Core driver implementation with ebtables support This patch implements the core driver and provides - management functionality for managing the filter XMLs - compiling the internal filter representation into ebtables rules - applying ebtables rules on a network (tap,macvtap) interface - tearing down ebtables rules that were applied on behalf of an interface - updating of filters while VMs are running and causing the firewalls to be rebuilt - other bits and pieces Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
2010-03-25 17:46:09 +00:00
src/nwfilter/nwfilter_driver.c
src/nwfilter/nwfilter_ebiptables_driver.c
src/nwfilter/nwfilter_gentech_driver.c
Add missing nwfilter_learnipaddr.c to POTFILES.in * po/POTFILES.in: Add src/nwfilter/nwfilter_learnipaddr.c
2010-04-08 11:01:00 +00:00
src/nwfilter/nwfilter_learnipaddr.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/openvz/openvz_conf.c
src/openvz/openvz_driver.c
Add openvz_util.c to POTFILES
2012-05-15 15:27:08 +00:00
src/openvz/openvz_util.c
parallels: rename all parallels files and driver directory to vz This patch moves all src/parallels/parallels* files to vz/vz* and fixes build accordingly. No functional changes. Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
2015-06-10 07:50:00 +00:00
src/vz/vz_driver.c
src/vz/vz_sdk.c
src/vz/vz_utils.c
src/vz/vz_utils.h
Add phyp files to POTFILES, to make syntax-check happy.
2009-07-26 21:53:34 +00:00
src/phyp/phyp_driver.c
QEMU guest agent support There is now a standard QEMU guest agent that can be installed and given a virtio serial channel <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/f16x86_64.agent'/> <target type='virtio' name='org.qemu.guest_agent.0'/> </channel> The protocol that runs over the guest agent is JSON based and very similar to the JSON monitor. We can't use exactly the same code because there are some odd differences in the way messages and errors are structured. The qemu_agent.c file is based on a combination and simplification of qemu_monitor.c and qemu_monitor_json.c * src/qemu/qemu_agent.c, src/qemu/qemu_agent.h: Support for talking to the agent for shutdown * src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add thread helpers for talking to the agent * src/qemu/qemu_process.c: Connect to agent whenever starting a guest * src/qemu/qemu_monitor_json.c: Make variable static
2011-10-05 17:31:54 +00:00
src/qemu/qemu_agent.c
qemu: Move qemuAssign*Alias* API's into their own module Create a new module qemu_alias.c to handle the qemuAssign*Alias* APIs and the qemuDomainDeviceAliasIndex
2016-02-16 15:24:35 +00:00
src/qemu/qemu_alias.c
Move QEMU capabilities management into a separate file The qemu_conf.c code is doing three jobs, driver config file loading, QEMU capabilities management and QEMU command line management. Move the capabilities code into its own file * src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h: New capabilities management code * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete capabilities code * src/qemu/qemu_conf.h: Adapt for API renames * src/Makefile.am: add src/qemu/qemu_capabilities.c
2010-12-16 15:07:07 +00:00
src/qemu/qemu_capabilities.c
Move QEMU cgroup helper code out of the QEMU driver The QEMU driver file is far too large. Move all the cgroup helper code out into a separate file. No functional change. * src/qemu/qemu_cgroup.c, src/qemu/qemu_cgroup.h, src/Makefile.am: Add cgroup helper file * src/qemu/qemu_driver.c: Delete cgroup code
2010-12-16 16:10:54 +00:00
src/qemu/qemu_cgroup.c
Move QEMU command line management into a separate file The qemu_conf.c code is doing three jobs, driver config file loading, QEMU capabilities management and QEMU command line management. Move the command line code into its own file * src/qemu/qemu_command.c, src/qemu/qemu_command.h: New command line management code * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete command line code * src/qemu/qemu_conf.h, src/qemu_conf.c: Adapt for API renames * src/Makefile.am: add src/qemu/qemu_command.c * src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Add import of qemu_command.h
2010-12-16 15:07:07 +00:00
src/qemu/qemu_command.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/qemu/qemu_conf.c
Move QEMU private data & namespace code into separate file Move the code for handling the QEMU virDomainObjPtr private data, and custom XML namespace into a separate file * src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: New file for private data & namespace code * src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove private data & namespace code * src/qemu/qemu_driver.h, src/qemu/qemu_command.h: Update includes * src/Makefile.am: Add src/qemu/qemu_domain.c
2010-12-16 15:23:41 +00:00
src/qemu/qemu_domain.c
qemu: Move qemuDomain*Address* functions Create new modules qemu_domain_address.c and qemu_domain_address.h to contain all the new functions and header data. Additionally move any supporting static functions. Make qemuDomainSupportsPCI non static. Also, move and rename the following: qemuSetSCSIControllerModel to qemuDomainSetSCSIControllerModel qemuCollectPCIAddress to qemuDomainCollectPCIAddress qemuValidateDevicePCISlotsPIIX3 to qemuDomainValidateDevicePCISlotsPIIX3 qemuAssignDevicePCISlots to qemuDomainAssignDevicePCISlots Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-02-15 18:08:02 +00:00
src/qemu/qemu_domain_address.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/qemu/qemu_driver.c
Move QEMU hostdev helper code out of the QEMU driver The QEMU driver file is far too large. Move all the hostdev helper code out into a separate file. No functional change. * src/qemu/qemu_hostdev.c, src/qemu/qemu_hostdev.h, src/Makefile.am: Add hostdev helper file * src/qemu/qemu_driver.c: Delete hostdev code
2010-12-16 16:10:54 +00:00
src/qemu/qemu_hostdev.c
Move QEMU hotplug helper code out of the QEMU driver The QEMU driver file is far too large. Move all the hotplug helper code out into a separate file. No functional change. * src/qemu/qemu_hotplug.c, src/qemu/qemu_hotplug.h, src/Makefile.am: Add hotplug helper file * src/qemu/qemu_driver.c: Delete hotplug code
2010-12-16 16:10:54 +00:00
src/qemu/qemu_hotplug.c
qemu: Move qemuNetworkIfaceConnect to qemu_interface.c and rename Move the misplaced function from qemu_command.c to qemu_interface.c since it's closer in functionality there and had less to do with building the command line. Rename function to qemuInterfaceBridgeConnect and modify callers. Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-02-15 15:52:50 +00:00
src/qemu/qemu_interface.c
Move all the QEMU migration code to a new file The introduction of the v3 migration protocol, along with support for migration cookies, will significantly expand the size of the migration code. Move it all to a separate file to make it more manageable The functions are not moved 100%. The API entry points remain in the main QEMU driver, but once the public virDomainPtr is resolved to the internal virDomainObjPtr, all following code is moved. This will allow the new v3 API entry points to call into the same shared internal migration functions * src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add qemuDomainFormatXML helper method * src/qemu/qemu_driver.c: Remove all migration code * src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Add all migration code.
2011-01-31 10:47:03 +00:00
src/qemu/qemu_migration.c
Move code for low level QEMU monitor interaction into separate file The qemu_driver.c code should not contain any code that interacts with the QEMU monitor at a low level. A previous commit moved all the command invocations out. This change moves out the code which actually opens the monitor device. * src/qemu/qemu_driver.c: Remove qemudOpenMonitor & methods called from it. * src/Makefile.am: Add qemu_monitor.{c,h} * src/qemu/qemu_monitor.h: Add qemuMonitorOpen() * src/qemu/qemu_monitor.c: All code for opening the monitor
2009-10-09 18:07:55 +00:00
src/qemu/qemu_monitor.c
Support for JSON mode monitor Initial support for the new QEMU monitor protocol using JSON as the data encoding format instead of plain text * po/POTFILES.in: Add src/qemu/qemu_monitor_json.c * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP mode. Replace with a version number check on >= 0.12 later * src/qemu/qemu_monitor.c: Delegate to json monitor if enabled * src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add impl of QMP protocol * src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
2009-11-03 18:59:18 +00:00
src/qemu/qemu_monitor_json.c
Pull QEMU monitor interaction out to separate file Pull out all the QEMU monitor interaction code to a separate file. This will make life easier when we need to drop in a new implementation for the forthcoming QMP machine friendly monitor support. Next step is to add formal APIs for each monitor command, and remove direct commands for sending/receiving generic data. * src/Makefile.am: Add qemu_monitor.c to build * src/qemu/qemu_driver.c: Remove code for monitor interaction * src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: New file for monitor interaction * po/POTFILES.in: Add src/qemu/qemu_monitor_text.c
2009-09-22 17:48:40 +00:00
src/qemu/qemu_monitor_text.c
qemu: Split the command parsing routines into own module Extract out the qemuParseCommandLine{String|Pid} into their own separate module - taking with it all the various static functions. Causes a ripple effect with a few other modules to include the new qemu_parse_command.h. Narrowed down the list of #include's in the split out module to those that are necessary for build.
2016-02-10 12:33:47 +00:00
src/qemu/qemu_parse_command.c
Split all QEMU process mangement code into separate file Move the qemudStartVMDaemon and qemudShutdownVMDaemon methods into a separate file, renaming them to qemuProcessStart, qemuProcessStop. All helper methods called by these are also moved & renamed to match * src/Makefile.am: Add qemu_process.c/.h * src/qemu/qemu_command.c: Add qemuDomainAssignPCIAddresses * src/qemu/qemu_command.h: Add VNC port min/max * src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add domain event queue helpers * src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove all QEMU process startup/shutdown functions * src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add all QEMU process startup/shutdown functions
2011-02-14 16:09:39 +00:00
src/qemu/qemu_process.c
build: translate generated strings Make sure that xgettext scans generated files for translatable strings, rather than just files stored in libvirt.git. * .gnulib: Update, for bootstrap and syntax-check fixes. * bootstrap: Resynchronize with gnulib. * cfg.mk (generated_files): Define. * po/POTFILES.in: Add more files with _().
2011-05-04 14:18:06 +00:00
src/remote/remote_client_bodies.h
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/remote/remote_driver.c
Implement common keepalive handling These APIs are used by both client and server RPC layer to handle processing of keepalive messages.
2011-09-22 11:40:00 +00:00
src/rpc/virkeepalive.c
Introduce generic RPC client objects To facilitate creation of new clients using XDR RPC services, pull alot of the remote driver code into a set of reusable objects. - virNetClient: Encapsulates a socket connection to a remote RPC server. Handles all the network I/O for reading/writing RPC messages. Delegates RPC encoding and decoding to the registered programs - virNetClientProgram: Handles processing and dispatch of RPC messages for a single RPC (program,version). A program can register to receive async events from a client - virNetClientStream: Handles generic I/O stream integration to RPC layer Each new client program now merely needs to define the list of RPC procedures & events it wants and their handlers. It does not need to deal with any of the network I/O functionality at all.
2010-12-01 16:35:50 +00:00
src/rpc/virnetclient.c
src/rpc/virnetclientprogram.c
src/rpc/virnetclientstream.c
Move daemon-related parts of virNetServer to virNetDaemon This allows to have more servers in one daemon which helps isolating some resources. Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-03-16 14:02:41 +00:00
src/rpc/virnetdaemon.c
Provide a simple object for encoding/decoding RPC messages This provides a new struct that contains a buffer for the RPC message header+payload, as well as a decoded copy of the message header. There is an API for applying a XDR encoding & decoding of the message headers and payloads. There are also APIs for maintaining a simple FIFO queue of message instances. Expected usage scenarios are: To send a message msg = virNetMessageNew() ...fill in msg->header fields.. virNetMessageEncodeHeader(msg) ...loook at msg->header fields to determine payload filter virNetMessageEncodePayload(msg, xdrfilter, data) ...send msg->bufferLength worth of data from buffer To receive a message msg = virNetMessageNew() ...read VIR_NET_MESSAGE_LEN_MAX of data into buffer virNetMessageDecodeLength(msg) ...read msg->bufferLength-msg->bufferOffset of data into buffer virNetMessageDecodeHeader(msg) ...look at msg->header fields to determine payload filter virNetMessageDecodePayload(msg, xdrfilter, data) ...run payload processor * src/Makefile.am: Add to libvirt-net-rpc.la * src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Internal message handling API. * testutils.c, testutils.h: Helper for printing binary differences * virnetmessagetest.c: Validate all XDR encoding/decoding
2010-12-06 17:03:22 +00:00
src/rpc/virnetmessage.c
Generic module for handling SASL authentication & encryption This provides two modules for handling SASL * virNetSASLContext provides the process-wide state, currently just a whitelist of usernames on the server and a one time library init call * virNetTLSSession provides the per-connection state, ie the SASL session itself. This also include APIs for providing data encryption/decryption once the session is established * src/Makefile.am: Add to libvirt-net-rpc.la * src/rpc/virnetsaslcontext.c, src/rpc/virnetsaslcontext.h: Generic SASL handling code
2010-12-10 12:21:18 +00:00
src/rpc/virnetsaslcontext.c
Introduce a generic object for using network sockets Introduces a simple wrapper around the raw POSIX sockets APIs and name resolution APIs. Allows for easy creation of client and server sockets with correct usage of name resolution APIs for protocol agnostic socket setup. It can listen for UNIX and TCP stream sockets. It can connect to UNIX, TCP streams directly, or indirectly to UNIX sockets via an SSH tunnel or external command * src/Makefile.am: Add to libvirt-net-rpc.la * src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Generic sockets APIs * tests/Makefile.am: Add socket test * tests/virnetsockettest.c: New test case * tests/testutils.c: Avoid overriding LIBVIRT_DEBUG settings * tests/ssh.c: Dumb helper program for SSH tunnelling tests
2010-12-06 17:03:35 +00:00
src/rpc/virnetsocket.c
Introduce generic RPC server objects To facilitate creation of new daemons providing XDR RPC services, pull a lot of the libvirtd daemon code into a set of reusable objects. * virNetServer: A server contains one or more services which accept incoming clients. It maintains the list of active clients. It has a list of RPC programs which can be used by clients. When clients produce a complete RPC message, the server passes this onto the corresponding program for handling, and queues any response back with the client. * virNetServerClient: Encapsulates a single client connection. All I/O for the client is handled, reading & writing RPC messages. * virNetServerProgram: Handles processing and dispatch of RPC method calls for a single RPC (program,version). Multiple programs can be registered with the server. * virNetServerService: Encapsulates socket(s) listening for new connections. Each service listens on a single host/port, but may have multiple sockets if on a dual IPv4/6 host. Each new daemon now merely has to define the list of RPC procedures & their handlers. It does not need to deal with any network related functionality at all.
2010-12-01 16:36:40 +00:00
src/rpc/virnetserver.c
src/rpc/virnetserverclient.c
Introduce generic RPC module for advertising via MDNS Allow RPC servers to advertise themselves using MDNS, via Avahi * src/rpc/virnetserver.c, src/rpc/virnetserver.h: Allow registration of MDNS services via avahi * src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h: Add API to fetch the listen port number * src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add API to fetch the local port number * src/rpc/virnetservermdns.c, src/rpc/virnetservermdns.h: Represent an MDNS advertisement
2011-03-02 17:11:42 +00:00
src/rpc/virnetservermdns.c
Introduce generic RPC server objects To facilitate creation of new daemons providing XDR RPC services, pull a lot of the libvirtd daemon code into a set of reusable objects. * virNetServer: A server contains one or more services which accept incoming clients. It maintains the list of active clients. It has a list of RPC programs which can be used by clients. When clients produce a complete RPC message, the server passes this onto the corresponding program for handling, and queues any response back with the client. * virNetServerClient: Encapsulates a single client connection. All I/O for the client is handled, reading & writing RPC messages. * virNetServerProgram: Handles processing and dispatch of RPC method calls for a single RPC (program,version). Multiple programs can be registered with the server. * virNetServerService: Encapsulates socket(s) listening for new connections. Each service listens on a single host/port, but may have multiple sockets if on a dual IPv4/6 host. Each new daemon now merely has to define the list of RPC procedures & their handlers. It does not need to deal with any network related functionality at all.
2010-12-01 16:36:40 +00:00
src/rpc/virnetserverprogram.c
Add JSON serialization of virNetServerServicePtr objects for process re-exec() Add two new APIs virNetServerServiceNewPostExecRestart and virNetServerServicePreExecRestart which allow a virNetServerServicePtr object to be created from a JSON object and saved to a JSON object, for the purpose of re-exec'ing a process. This includes serialization of the listening sockets associated with the service Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-08-09 11:54:54 +00:00
src/rpc/virnetserverservice.c
libssh2_transport: add main libssh2 transport implementation This patch adds helper functions that enable us to use libssh2 in conjunction with libvirt's virNetSockets for ssh transport instead of spawning "ssh" client process. This implemetation supports tunneled plaintext, keyboard-interactive, private key, ssh agent based and null authentication. Libvirt's Auth callback is used for interaction with the user. (Keyboard interactive authentication, adding of host keys, private key passphrases). This enables seamless integration into the application using libvirt. No helpers as "ssh-askpass" are needed. Reading and writing of OpenSSH style "known_hosts" files is supported. Communication is done using SSH exec channel, where the user may specify arbitrary command to be executed on the remote side and reads and writes to/from stdin/out are sent through the ssh channel. Usage of stderr is not (yet) supported.
2011-11-14 14:30:23 +00:00
src/rpc/virnetsshsession.c
Generic module for handling TLS encryption and x509 certs This provides two modules for handling TLS * virNetTLSContext provides the process-wide state, in particular all the x509 credentials, DH params and x509 whitelists * virNetTLSSession provides the per-connection state, ie the TLS session itself. The virNetTLSContext provides APIs for validating a TLS session's x509 credentials. The virNetTLSSession includes APIs for performing the initial TLS handshake and sending/recving encrypted data * src/Makefile.am: Add to libvirt-net-rpc.la * src/rpc/virnettlscontext.c, src/rpc/virnettlscontext.h: Generic TLS handling code
2010-11-23 20:17:41 +00:00
src/rpc/virnettlscontext.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/secret/secret_driver.c
sVirt AppArmor security driver * configure.in: look for AppArmor and devel * src/security/security_apparmor.[ch] src/security/security_driver.c src/Makefile.am: add and plug the new driver * src/security/virt-aa-helper.c: new binary which is used exclusively by the AppArmor security driver to manipulate AppArmor. * po/POTFILES.in: registers the new files * tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test: tests for virt-aa-helper and the security driver, secaatest.c is identical to seclabeltest.c except it initializes the 'apparmor' driver instead of 'selinux'
2009-10-08 14:34:22 +00:00
src/security/security_apparmor.c
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
src/security/security_dac.c
maint: update po/POTFILES.in * po/POTFILES.in: Add 3 files.
2010-05-20 06:59:01 +00:00
src/security/security_driver.c
Add two new security label types Curently security labels can be of type 'dynamic' or 'static'. If no security label is given, then 'dynamic' is assumed. The current code takes advantage of this default, and avoids even saving <seclabel> elements with type='dynamic' to disk. This means if you temporarily change security driver, the guests can all still start. With the introduction of sVirt to LXC though, there needs to be a new default of 'none' to allow unconfined LXC containers. This patch introduces two new security label types - default: the host configuration decides whether to run the guest with type 'none' or 'dynamic' at guest start - none: the guest will run unconfined by security policy The 'none' label type will obviously be undesirable for some deployments, so a new qemu.conf option allows a host admin to mandate confined guests. It is also possible to turn off default confinement security_default_confined = 1|0 (default == 1) security_require_confined = 1|0 (default == 0) * src/conf/domain_conf.c, src/conf/domain_conf.h: Add new seclabel types * src/security/security_manager.c, src/security/security_manager.h: Set default sec label types * src/security/security_selinux.c: Handle 'none' seclabel type * src/qemu/qemu.conf, src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/libvirtd_qemu.aug: New security config options * src/qemu/qemu_driver.c: Tell security driver about default config
2012-01-25 14:12:52 +00:00
src/security/security_manager.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/security/security_selinux.c
sVirt AppArmor security driver * configure.in: look for AppArmor and devel * src/security/security_apparmor.[ch] src/security/security_driver.c src/Makefile.am: add and plug the new driver * src/security/virt-aa-helper.c: new binary which is used exclusively by the AppArmor security driver to manipulate AppArmor. * po/POTFILES.in: registers the new files * tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test: tests for virt-aa-helper and the security driver, secaatest.c is identical to seclabeltest.c except it initializes the 'apparmor' driver instead of 'selinux'
2009-10-08 14:34:22 +00:00
src/security/virt-aa-helper.c
maint: improve i18n on non-Linux Per the gettext developer: http://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00019.html http://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00021.html gettext() doesn't work correctly on all platforms unless you have called setlocale(). Furthermore, gnulib's gettext.h has provisions for setting up a default locale, which is the preferred method for libraries to use gettext without having to call textdomain() and override the main program's default domain (virInitialize already calls bindtextdomain(), but this is insufficient without the setlocale() added in this patch; and a redundant bindtextdomain() in this patch doesn't hurt, but serves as a good example for other packages that need to bind a second translation domain). This patch is needed to silence a new gnulib 'make syntax-check' rule in the next patch. * daemon/libvirtd.c (main): Setup locale and gettext. * src/lxc/lxc_controller.c (main): Likewise. * src/security/virt-aa-helper.c (main): Likewise. * src/storage/parthelper.c (main): Likewise. * tools/virsh.c (main): Fix exit status. * src/internal.h (DEFAULT_TEXT_DOMAIN): Define, for gettext.h. (_): Simplify definition accordingly. * po/POTFILES.in: Add src/storage/parthelper.c.
2010-11-16 19:01:37 +00:00
src/storage/parthelper.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/storage/storage_backend.c
src/storage/storage_backend_disk.c
src/storage/storage_backend_fs.c
storage: initial support for linking with libgfapi We support gluster volumes in domain XML, so we also ought to support them as a storage pool. Besides, a future patch will want to take advantage of libgfapi to handle the case of a gluster device holding qcow2 rather than raw storage, and for that to work, we need a storage backend that can read gluster storage volume contents. This sets up the framework. Note that the new pool is named 'gluster' to match a <disk type='network'><source protocol='gluster'> image source already supported in a <domain>; it does NOT match the <pool type='netfs'><source><target type='glusterfs'>, since that uses a FUSE mount to a local file name rather than a network name. This and subsequent patches have been tested against glusterfs 3.4.1 (available on Fedora 19); there are likely bugs in older versions that may prevent decent use of gfapi, so this patch enforces the minimum version tested. A future patch may lower the minimum. On the other hand, I hit at least two bugs in 3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth raising the minimum: glfs_readdir is nicer to use than glfs_readdir_r [1], and glfs_fini should only return failure on an actual failure [2]. [1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html [2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html * configure.ac (WITH_STORAGE_GLUSTER): New conditional. * m4/virt-gluster.m4: new file. * libvirt.spec.in (BuildRequires): Support gluster in spec file. * src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool type. * src/conf/storage_conf.c (poolTypeInfo): Treat similar to sheepdog and rbd. (virStoragePoolDefFormat): Don't output target for gluster. * src/storage/storage_backend_gluster.h: New file. * src/storage/storage_backend_gluster.c: Likewise. * po/POTFILES.in: Add new file. * src/storage/storage_backend.c (backends): Register new type. * src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files. * src/storage/storage_backend.h (_virStorageBackend): Documet assumption. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-19 23:26:05 +00:00
src/storage/storage_backend_gluster.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/storage/storage_backend_iscsi.c
src/storage/storage_backend_logical.c
src/storage/storage_backend_mpath.c
storage backend: Add RBD (RADOS Block Device) support This patch adds support for a new storage backend with RBD support. RBD is the RADOS Block Device and is part of the Ceph distributed storage system. It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only. To function this backend relies on librbd and librados being present on the local system. The backend also supports Cephx authentication for safe authentication with the Ceph cluster. For storing credentials it uses the built-in secret mechanism of libvirt. Signed-off-by: Wido den Hollander <wido@widodh.nl>
2012-05-14 09:06:42 +00:00
src/storage/storage_backend_rbd.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/storage/storage_backend_scsi.c
Add a sheepdog backend for the storage driver This patch brings support to manage sheepdog pools and volumes to libvirt. It uses the "collie" command-line utility that comes with sheepdog for that. A sheepdog pool in libvirt maps to a sheepdog cluster. It needs a host and port to connect to, which in most cases is just going to be the default of localhost on port 7000. A sheepdog volume in libvirt maps to a sheepdog vdi. To create one specify the pool, a name and the capacity. Volumes can also be resized later. In the volume XML the vdi name has to be put into the <target><path>. To use the volume as a disk source for virtual machines specify the vdi name as "name" attribute of the <source>. The host and port information from the pool are specified inside the host tag. <disk type='network'> ... <source protocol="sheepdog" name="vdi_name"> <host name="localhost" port="7000"/> </source> </disk> To work right this patch parses the output of collie, so it relies on the raw output option. There recently was a bug which caused size information to be reported wrong. This is fixed upstream already and will be in the next release. Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
2012-07-18 19:06:58 +00:00
src/storage/storage_backend_sheepdog.c
storage: ZFS support Implement ZFS storage backend driver. Currently supported only on FreeBSD because of ZFS limitations on Linux. Features supported: - pool-start, pool-stop - pool-info - vol-list - vol-create / vol-delete Pool definition looks like that: <pool type='zfs'> <name>myzfspool</name> <source> <name>actualpoolname</name> </source> </pool> The 'actualpoolname' value is a name of the pool on the system, such as shown by 'zpool list' command. Target makes no sense here because volumes path is always /dev/zvol/$poolname/$volname. User has to create a pool on his own, this driver doesn't support pool creation currently. A volume could be used with Qemu by adding an entry like this: <disk type='volume' device='disk'> <driver name='qemu' type='raw'/> <source pool='myzfspool' volume='vol5'/> <target dev='hdc' bus='ide'/> </disk>
2014-07-21 14:38:42 +00:00
src/storage/storage_backend_zfs.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/storage/storage_driver.c
src/test/test_driver.c
src/uml/uml_conf.c
src/uml/uml_driver.c
Enhance the streams helper to support plain file I/O The O_NONBLOCK flag doesn't work as desired on plain files or block devices. Introduce an I/O helper program that does the blocking I/O operations, communicating over a pipe that can support O_NONBLOCK * src/fdstream.c, src/fdstream.h: Add non-blocking I/O on plain files/block devices * src/Makefile.am, src/util/iohelper.c: I/O helper program * src/qemu/qemu_driver.c, src/lxc/lxc_driver.c, src/uml/uml_driver.c, src/xen/xen_driver.c: Update for streams API change
2011-02-22 12:05:20 +00:00
src/util/iohelper.c
viralloc: Report OOM error on failure Similarly to VIR_STRDUP, we want the OOM error to be reported in VIR_ALLOC and friends.
2013-06-07 08:37:25 +00:00
src/util/viralloc.c
maint: rename virtaudit to match file contents * src/util/virtaudit.[ch]: Rename... * src/util/viraudit.[ch]: ...to match virAudit* API. * src/Makefile.am (UTIL_SOURCES): Reflect rename. * daemon/libvirtd.c: Likewise. * po/POTFILES.in: Likewise. * src/libvirt_private.syms: Likewise. * src/qemu/qemu_audit.c: Likewise.
2011-07-11 19:42:15 +00:00
src/util/viraudit.c
Rename src/util/authhelper.[ch] to src/util/virauth.[ch] To follow latest naming conventions, rename src/util/authhelper.[ch] to src/util/virauth.[ch]. * src/util/authhelper.[ch]: Rename to src/util/virauth.[ch] * src/esx/esx_driver.c, src/hyperv/hyperv_driver.c, src/phyp/phyp_driver.c, src/xenapi/xenapi_driver.c: Update for renamed include files Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-03-19 16:21:12 +00:00
src/util/virauth.c
Add helper API for finding auth file path * src/util/virauth.c, src/util/virauth.h: Add virAuthGetConfigFilePath * include/libvirt/virterror.h, src/util/virterror.c: Add VIR_FROM_AUTH error domain Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-03-20 15:40:05 +00:00
src/util/virauthconfig.c
virBitmapParse: Fix behavior in case of error and fix up callers Re-arrange the code so that the returned bitmap is always initialized to NULL even on early failures and return an error message as some callers are already expecting it. Fix up the rest not to shadow the error.
2013-08-19 14:08:24 +00:00
src/util/virbitmap.c
Introduce virBufferCheckError Check if the buffer is in error state and report an error if it is. This replaces the pattern: if (virBufferError(buf)) { virReportOOMError(); goto cleanup; } with: if (virBufferCheckError(buf) < 0) goto cleanup; Document typical buffer usage to favor this. Also remove the redundant FreeAndReset - if an error has been set via virBufferSetError, the content is already freed.
2014-06-27 07:23:13 +00:00
src/util/virbuffer.c
Rename cgroup.{h,c} to vircgroup.{h,c} To bring in line with new naming practice, rename the= src/util/cgroup.{h,c} files to vircgroup.{h,c} Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-03 15:03:47 +00:00
src/util/vircgroup.c
qemu: Move close callbacks handling into util/virclosecallbacks.c
2013-07-15 14:53:13 +00:00
src/util/virclosecallbacks.c
Rename command.{c,h} to vircommand.{c,h}
2012-12-12 16:27:01 +00:00
src/util/vircommand.c
Rename conf.{c,h} to virconf.{c,h}
2012-12-12 16:35:35 +00:00
src/util/virconf.c
Add helper APIs for generating cryptographic hashes GNULIB provides APIs for calculating md5 and sha256 hashes, but these APIs only return you raw byte arrays. Most users in libvirt want the hash in printable string format. Add some helper APIs in util/vircrypto.{c,h} for doing this. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-05 12:34:10 +00:00
src/util/vircrypto.c
The policy kit and HAL node device drivers both require a DBus connection. The HAL device code further requires that the DBus connection is integrated with the event loop and provides such glue logic itself. The forthcoming FirewallD integration also requires a dbus connection with event loop integration. Thus we need to pull the current event loop glue out of the HAL driver. Thus we create src/util/virdbus.{c,h} files. This contains just one method virDBusGetSystemBus() which obtains a handle to the single shared system bus instance, with event glue automagically setup.
2012-04-19 14:34:35 +00:00
src/util/virdbus.c
Rename dnsmasq.{c,h} to virdnsmasq.{c,h}
2012-12-12 16:43:54 +00:00
src/util/virdnsmasq.c
POTFILES.in: Sort Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-03-11 09:24:09 +00:00
src/util/virerror.c
src/util/virerror.h
Rename event_poll.{c,h} to vireventpoll.{c,h}
2012-12-12 16:54:55 +00:00
src/util/vireventpoll.c
save: add virFileDirectFd wrapper type O_DIRECT has stringent requirements. Rather than make lots of changes at each site that wants to use O_DIRECT, it is easier to offload the work through a helper process that mirrors the I/O between a pipe and the actual direct fd, so that the other end of the pipe no longer has to worry about constraints. Plus, if the kernel ever gains better posix_fadvise support, then we only have to touch a single file to let all callers benefit from a more efficient way to avoid file system caching. * src/util/virfile.h (virFileDirectFdFlag, virFileDirectFdNew) (virFileDirectFdClose, virFileDirectFdFree): New prototypes. * src/util/virdirect.c: Implement new wrapper object. * src/libvirt_private.syms (virfile.h): Export new symbols. * cfg.mk (useless_free_options): Add to list. * po/POTFILES.in: Add new translations.
2011-07-11 21:26:33 +00:00
src/util/virfile.c
Introduce an object for managing firewall rulesets The network and nwfilter drivers both have a need to update firewall rules. The currently share no code for interacting with iptables / firewalld. The nwfilter driver is fairly tied to the concept of creating shell scripts to execute which makes it very hard to port to talk to firewalld via DBus APIs. This patch introduces a virFirewallPtr object which is able to represent a complete sequence of rule changes, with the ability to have multiple transactional checkpoints with rollbacks. By formally separating the definition of the rules to be applied from the mechanism used to apply them, it is also possible to write a firewall engine that uses firewalld DBus APIs natively instead of via the slow firewalld-cmd. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-04 16:30:40 +00:00
src/util/virfirewall.c
Rename hash.h and hash.c to virhash.h and virhash.c In preparation for the patch to include Murmurhash3, which introduces a virhashcode.h and virhashcode.c files, rename the existing hash.h and hash.c to virhash.h and virhash.c respectively.
2012-01-25 16:13:59 +00:00
src/util/virhash.c
Rename hooks.{c,h} to virhook.{c,h}
2012-12-12 17:00:34 +00:00
src/util/virhook.c
add virhostdev files to maintain global state of host devices Signed-off-by: Chunyan Liu <cyliu@suse.com>
2014-03-01 06:28:59 +00:00
src/util/virhostdev.c
Define internal APIs for managing identities Introduce a local object virIdentity for managing security attributes used to form a client application's identity. Instances of this object are intended to be used as if they were immutable, once created & populated with attributes Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-01-20 17:49:32 +00:00
src/util/viridentity.c
Add APIs for talking to init via /dev/initctl To be able todo controlled shutdown/reboot of containers an API to talk to init via /dev/initctl is required. Fortunately this is quite straightforward to implement, and is supported by both sysvinit and systemd. Upstart support for /dev/initctl is unclear. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-28 12:17:31 +00:00
src/util/virinitctl.c
Rename iptables.{c,h} to viriptables.{c,h}
2012-12-12 17:42:44 +00:00
src/util/viriptables.c
Move functions using iscsiadm to viriscsi.c Remove the 'StorageBackend' from names of the functions and fix indentation.
2014-03-19 15:03:11 +00:00
src/util/viriscsi.c
Rename json.{c,h} to virjson.{c,h}
2012-12-12 17:53:50 +00:00
src/util/virjson.c
Add a virKeyfilePtr object for parsing '.ini' files The '.ini' file format is a useful alternative to the existing config file style, when you need to have config files which are hashes of hashes. The 'virKeyFilePtr' object provides a way to parse these file types. * src/Makefile.am, src/util/virkeyfile.c, src/util/virkeyfile.h: Add .ini file parser * tests/Makefile.am, tests/virkeyfiletest.c: Test basic parsing capabilities Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-03-16 16:29:49 +00:00
src/util/virkeyfile.c
Export virLease* functions for leases file handling These functions are going to be reused very shortly. So instead of duplicating the code, lets move them into utils module. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-02-14 06:50:12 +00:00
src/util/virlease.c
Introduce an internal API for handling file based lockspaces The previously introduced virFile{Lock,Unlock} APIs provide a way to acquire/release fcntl() locks on individual files. For unknown reason though, the POSIX spec says that fcntl() locks are released when *any* file handle referring to the same path is closed. In the following sequence threadA: fd1 = open("foo") threadB: fd2 = open("foo") threadA: virFileLock(fd1) threadB: virFileLock(fd2) threadB: close(fd2) you'd expect threadA to come out holding a lock on 'foo', and indeed it does hold a lock for a very short time. Unfortunately when threadB does close(fd2) this releases the lock associated with fd1. For the current libvirt use case for virFileLock - pidfiles - this doesn't matter since the lock is acquired at startup while single threaded an never released until exit. To provide a more generally useful API though, it is necessary to introduce a slightly higher level abstraction, which is to be referred to as a "lockspace". This is to be provided by a virLockSpacePtr object in src/util/virlockspace.{c,h}. The core idea is that the lockspace keeps track of what files are already open+locked. This means that when a 2nd thread comes along and tries to acquire a lock, it doesn't end up opening and closing a new FD. The lockspace just checks the current list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY. NB, the API as it stands is designed on the basis that the files being locked are not being otherwise opened and used by the application code. One approach to using this API is to acquire locks based on a hash of the filepath. eg to lock /var/lib/libvirt/images/foo.img the application might do virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks"); lockname = md5sum("/var/lib/libvirt/images/foo.img"); virLockSpaceAcquireLock(lockspace, lockname); NB, in this example, the caller should ensure that the path is canonicalized before calculating the checksum. It is also possible to do locks directly on resources by using a NULL lockspace directory and then using the file path as the lock name eg virLockSpacePtr lockspace = virLockSpaceNew(NULL); virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img"); This is only safe to do though if no other part of the process will be opening the files. This will be the case when this code is used inside the soon-to-be-reposted virlockd daemon Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-08-02 16:02:40 +00:00
src/util/virlockspace.c
virlog: Refactor virLogParseOutputs The problem with the original virLogParseOutputs method was that the way it parsed the input, walking the string char by char and using absolute jumps depending on the virLogDestination type, was rather complicated to read. This patch utilizes virStringSplit method twice, first time to filter out any spaces and split the input to individual log outputs and then for each individual output to tokenize it by to the parts according to our PRIORITY:DESTINATION?(:DATA) format. Also, to STREQLEN for matching destination was replaced with virDestinationTypeFromString call.
2016-03-15 21:15:02 +00:00
src/util/virlog.c
Split bridge.h into three separate files Following the renaming of the bridge management APIs, we can now split the source file into 3 corresponding pieces * src/util/virnetdev.c: APIs for any type of network interface * src/util/virnetdevbridge.c: APIs for bridge interfaces * src/util/virnetdevtap.c: APIs for TAP interfaces * src/util/virnetdev.c, src/util/virnetdev.h, src/util/virnetdevbridge.c, src/util/virnetdevbridge.h, src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied from bridge.{c,h} * src/util/bridge.c, src/util/bridge.h: Split into 3 pieces * src/lxc/lxc_driver.c, src/network/bridge_driver.c, src/openvz/openvz_driver.c, src/qemu/qemu_command.c, src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h, src/uml/uml_driver.c: Update #include directives
2011-11-02 13:41:58 +00:00
src/util/virnetdev.c
bandwidth: Create (un)plug functions These set bridge part of QoS when bringing domain's interface up. Long story short, if there's a 'floor' set, a new QoS class is created. ClassID MUST be unique within the bridge and should be kept for unplug phase.
2012-11-16 11:37:51 +00:00
src/util/virnetdevbandwidth.c
Split bridge.h into three separate files Following the renaming of the bridge management APIs, we can now split the source file into 3 corresponding pieces * src/util/virnetdev.c: APIs for any type of network interface * src/util/virnetdevbridge.c: APIs for bridge interfaces * src/util/virnetdevtap.c: APIs for TAP interfaces * src/util/virnetdev.c, src/util/virnetdev.h, src/util/virnetdevbridge.c, src/util/virnetdevbridge.h, src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied from bridge.{c,h} * src/util/bridge.c, src/util/bridge.h: Split into 3 pieces * src/lxc/lxc_driver.c, src/network/bridge_driver.c, src/openvz/openvz_driver.c, src/qemu/qemu_command.c, src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h, src/uml/uml_driver.c: Update #include directives
2011-11-02 13:41:58 +00:00
src/util/virnetdevbridge.c
Rename and split the macvtap.c file Rename the macvtap.c file to virnetdevmacvlan.c to reflect its functionality. Move the port profile association code out into virnetdevvportprofile.c. Make the APIs available unconditionally to callers * src/util/macvtap.h: rename to src/util/virnetdevmacvlan.h, * src/util/macvtap.c: rename to src/util/virnetdevmacvlan.c * src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h: Pull in vport association code * src/Makefile.am, src/conf/domain_conf.h, src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update include paths & remove conditional compilation
2011-11-02 17:11:02 +00:00
src/util/virnetdevmacvlan.c
util: functions to support binding/unbinding midonet virtualports Adds the port type definitions and methods that will be used to bind interfaces to the Midonet virtual ports. virtnetdevmidonet.c adds the way to bind and unbind the ports by calling into the Midonet Host Agent control command line (installed with the midolman package). Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
2015-02-23 20:54:54 +00:00
src/util/virnetdevmidonet.c
network: support Open vSwitch This patch allows libvirt to add interfaces to already existing Open vSwitch bridges. The following syntax in domain XML file can be used: <interface type='bridge'> <mac address='52:54:00:d0:3f:f2'/> <source bridge='ovsbr'/> <virtualport type='openvswitch'> <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/> </virtualport> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> or if libvirt should auto-generate the interfaceid use following syntax: <interface type='bridge'> <mac address='52:54:00:d0:3f:f2'/> <source bridge='ovsbr'/> <virtualport type='openvswitch'> </virtualport> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> It is also possible to pass an optional profileid. To do that use following syntax: <interface type='bridge'> <source bridge='ovsbr'/> <mac address='00:55:1a:65:a2:8d'/> <virtualport type='openvswitch'> <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d' profileid='test-profile'/> </virtualport> </interface> To create Open vSwitch bridge install Open vSwitch and run the following command: ovs-vsctl add-br ovsbr
2012-02-10 21:09:00 +00:00
src/util/virnetdevopenvswitch.c
Split bridge.h into three separate files Following the renaming of the bridge management APIs, we can now split the source file into 3 corresponding pieces * src/util/virnetdev.c: APIs for any type of network interface * src/util/virnetdevbridge.c: APIs for bridge interfaces * src/util/virnetdevtap.c: APIs for TAP interfaces * src/util/virnetdev.c, src/util/virnetdev.h, src/util/virnetdevbridge.c, src/util/virnetdevbridge.h, src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied from bridge.{c,h} * src/util/bridge.c, src/util/bridge.h: Split into 3 pieces * src/lxc/lxc_driver.c, src/network/bridge_driver.c, src/openvz/openvz_driver.c, src/qemu/qemu_command.c, src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h, src/uml/uml_driver.c: Update #include directives
2011-11-02 13:41:58 +00:00
src/util/virnetdevtap.c
Avoid reporting an error if veth device is already deleted The kernel automatically destroys veth devices when cleaning up the container network namespace. During normal shutdown, it is thus likely that the attempt to run 'ip link del vethN' will fail. If it fails, check if the device exists, and avoid reporting an error if it has gone. This switches to use the virCommand APIs instead of virRun too. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-02 10:16:14 +00:00
src/util/virnetdevveth.c
Rename and split the macvtap.c file Rename the macvtap.c file to virnetdevmacvlan.c to reflect its functionality. Move the port profile association code out into virnetdevvportprofile.c. Make the APIs available unconditionally to callers * src/util/macvtap.h: rename to src/util/virnetdevmacvlan.h, * src/util/macvtap.c: rename to src/util/virnetdevmacvlan.c * src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h: Pull in vport association code * src/Makefile.am, src/conf/domain_conf.h, src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update include paths & remove conditional compilation
2011-11-02 17:11:02 +00:00
src/util/virnetdevvportprofile.c
util: rename netlink.[ch] to virnetlink.[ch] Rename the src/util/netlink files to src/util/virnetlink to better fit the naming scheme. Also rename nlComm to virNetlinkCommand. Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
2012-02-03 14:13:19 +00:00
src/util/virnetlink.c
Implement the core API to suspend/resume the host Add the core functions that implement the functionality of the API. Suspend is done by using an asynchronous mechanism so that we can return the status to the caller before the host gets suspended. This asynchronous operation is achieved by suspending the host in a separate thread of execution. However, returning the status to the caller is only best-effort, but not guaranteed. To resume the host, an RTC alarm is set up (based on how long we want to suspend) before suspending the host. When this alarm fires, the host gets woken up. Suspend-to-RAM operation on a host running Linux can take upto more than 20 seconds, depending on the load of the system. (Freezing of tasks, an operation preceding any suspend operation, is given up after a 20 second timeout). And Suspend-to-Disk can take even more time, considering the time required for compaction, creating the memory image and writing it to disk etc. So, we do not allow the user to specify a suspend duration of less than 60 seconds, to be on the safer side, since we don't want to prematurely declare failure when we only had to wait for some more time.
2011-11-29 09:07:38 +00:00
src/util/virnodesuspend.c
rename qemuGetNumadAdvice to virNumaGetAutoPlacementAdvice qemuGetNumadAdvice will be used by LXC driver, rename it to virNumaGetAutoPlacementAdvice and move it to virnuma.c Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
2013-03-18 09:04:01 +00:00
src/util/virnuma.c
Allow for multi-level inheritance of virObject classes Currently all classes must directly inherit from virObject. This allows for arbitrarily deep hierarchy. There's not much to this aside from chaining up the 'dispose' handlers from each class & providing APIs to check types. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-09 17:37:27 +00:00
src/util/virobject.c
Rename pci.{c,h} to virpci.{c,h}
2012-12-13 14:52:25 +00:00
src/util/virpci.c
perf: implement a set of util functions for perf event This patch implement a set of interfaces for perf event. Based on these interfaces, we can implement internal driver API for perf, and get the results of perf conuter you care about. Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com> Message-id: 1459171833-26416-4-git-send-email-qiaowei.ren@intel.com
2016-03-28 13:30:28 +00:00
src/util/virperf.c
Add some APIs which use locking for crashsafe pidfile handling In daemons using pidfiles to protect against concurrent execution there is a possibility that a crash may leave a stale pidfile on disk, which then prevents later restart of the daemon. To avoid this problem, introduce a pair of APIs which make use of virFileLock to ensure crash-safe & race condition-safe pidfile acquisition & releae * src/libvirt_private.syms, src/util/virpidfile.c, src/util/virpidfile.h: Add virPidFileAcquire and virPidFileRelease
2011-07-06 16:12:26 +00:00
src/util/virpidfile.c
Add common API for doing polkit authentication There are now two places in libvirt which use polkit. Currently they use pkexec, which is set to be replaced by direct DBus API calls. Add a common API which they will both be able to use for this purpose. No tests are added at this time, since the impl will be gutted in favour of a DBus API call shortly. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-22 13:27:19 +00:00
src/util/virpolkit.c
Add a port allocator class Introduce a virPortAllocator for managing TCP port allocations. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-09 15:11:50 +00:00
src/util/virportallocator.c
Move virProcess{Kill,Abort,TranslateStatus} into virprocess.{c,h} Continue consolidation of process functions by moving some helpers out of command.{c,h} into virprocess.{c,h} Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-24 17:10:37 +00:00
src/util/virprocess.c
npiv: Auto-generate WWN if it's not specified The auto-generated WWN comply with the new addressing schema of WWN: <quote> the first nibble is either hex 5 or 6 followed by a 3-byte vendor identifier and 36 bits for a vendor-specified serial number. </quote> We choose hex 5 for the first nibble. And for the 3-bytes vendor ID, we uses the OUI according to underlying hypervisor type, (invoking virConnectGetType to get the virt type). e.g. If virConnectGetType returns "QEMU", we use Qumranet's OUI (00:1A:4A), if returns ESX|VMWARE, we use VMWARE's OUI (00:05:69). Currently it only supports qemu|xen|libxl|xenapi|hyperv|esx|vmware drivers. The last 36 bits are auto-generated.
2012-02-10 04:51:47 +00:00
src/util/virrandom.c
util: add APIs for reading/writing from/to rotating files Add virRotatingFileReader and virRotatingFileWriter objects which allow reading & writing from/to files with automation rotation to N backup files when a size limit is reached. This is useful for guest logging when a guaranteed finite size limit is required. Use of external tools like logrotate is inadequate since it leaves the possibility for guest to DOS the host in between invokations of logrotate. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:25:48 +00:00
src/util/virrotatingfile.c
Rename sexpr.{c,h} to virsexpr.{c,h}
2012-12-13 15:07:43 +00:00
src/util/virsexpr.c
utils: util functions for scsi hostdev This patch adds util functions for scsi hostdev. Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com> Signed-off-by: Osier Yang <jyang@redhat.com>
2013-05-03 18:07:22 +00:00
src/util/virscsi.c
Split src/util/network.{c,h} into 5 pieces The src/util/network.c file is a dumping ground for many different APIs. Split it up into 5 pieces, along functional lines - src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs - src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs - src/util/virsocketaddr.c: virSocketAddr and APIs - src/conf/netdev_bandwidth_conf.c: XML parsing / formatting for virNetDevBandwidth - src/conf/netdev_vport_profile_conf.c: XML parsing / formatting for virNetDevVPortProfile * src/util/network.c, src/util/network.h: Split into 5 pieces * src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h, src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h, src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h, src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h, src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces * daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c, src/conf/domain_conf.h, src/conf/network_conf.c, src/conf/network_conf.h, src/conf/nwfilter_conf.h, src/esx/esx_util.h, src/network/bridge_driver.c, src/qemu/qemu_conf.c, src/rpc/virnetsocket.c, src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h, src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h, src/util/virnetdev.h, src/util/virnetdevtap.c, tools/virsh.c: Update include files
2011-11-02 15:40:08 +00:00
src/util/virsocketaddr.c
util: virstatslinux: make more generic Rename linuxDomainInterfaceStats to virNetInterfaceStats in order to allow adding platform specific implementations without making consumer worrying about specific implementation to be used. Also, rename util/virstatslinux.c to util/virstats.c so placing other platform specific implementations into this file don't look unexpected from the file name.
2014-07-05 15:34:39 +00:00
src/util/virstats.c
conf: move storage encryption type to util/ Encryption keys can be associated with each source file in a backing chain; as such, this file belongs more in util/ where it can be used by virstoragefile.h. * src/conf/storage_encryption_conf.h: Rename... * src/util/virstorageencryption.h: ...to this. * src/conf/storage_encryption_conf.c: Rename... * src/util/virstorageencryption.c: ...to this. * src/Makefile.am (ENCRYPTION_CONF_SOURCES, CONF_SOURCES) (UTIL_SOURCES): Update to new file names. * src/libvirt_private.syms: Likewise. * src/conf/domain_conf.h: Update client. * src/conf/storage_conf.h: Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-28 03:26:44 +00:00
src/util/virstorageencryption.c
Rename storage_file.{c,h} to virstoragefile.{c,h}
2012-12-13 15:25:48 +00:00
src/util/virstoragefile.c
Add virStringSearch method for regex matching Add a virStringSearch method to virstring.{c,h} which performs a regex match against a string and returns the matching substrings. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-01-23 09:28:29 +00:00
src/util/virstring.c
Rename sysinfo.{c,h} to virsysinfo.{c,h}
2012-12-13 15:31:53 +00:00
src/util/virsysinfo.c
Add support for tracking thread jobs Each thread can use a thread local variable to keep the name of a job which is currently running in the job. The virThreadJobSetWorker API is supposed to be called once by any thread which is used as a worker, i.e., it is waiting in a pool, woken up to do a job, and returned back to the pool. The virThreadJobSet/virThreadJobClear APIs are to be called at the beginning/end of each job. Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2013-07-08 10:27:34 +00:00
src/util/virthreadjob.c
Add internal APIs for dealing with time The logging APIs need to be able to generate formatted timestamps using only async signal safe functions. This rules out using gmtime/localtime/malloc/gettimeday(!) and much more. Introduce a new internal API which is async signal safe. virTimeMillisNowRaw replacement for gettimeofday. Uses clock_gettime where available, otherwise falls back to the unsafe gettimeofday virTimeFieldsNowRaw replacements for gmtime(), convert a timestamp virTimeFieldsThenRaw into a broken out set of fields. No localtime() replacement is provided, because converting to local time is not practical with only async signal safe APIs. virTimeStringNowRaw replacements for strftime() which print a timestamp virTimeStringThenRaw into a string, using a pre-determined format, with a fixed size buffer (VIR_TIME_STRING_BUFLEN) For each of these there is also a version without the Raw postfix which raises a full libvirt error. These versions are not async signal safe * src/Makefile.am, src/util/virtime.c, src/util/virtime.h: New files * src/libvirt_private.syms: New APis * configure.ac: Check for clock_gettime in -lrt * tests/virtimetest.c, tests/Makefile.am: Test new APIs
2011-11-29 12:11:01 +00:00
src/util/virtime.c
Helper functions for host TPM support Implement helper function to create the TPM's sysfs cancel file. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
2013-04-12 20:55:45 +00:00
src/util/virtpm.c
util: add new file for virTypedParameter utils Preparation for another patch that refactors common patterns into the new file for fewer lines of code overall. * src/util/util.h (virTypedParameterArrayClear): Move... * src/util/virtypedparam.h: ...to new file. (virTypedParameterArrayValidate, virTypedParameterAssign): New prototypes. * src/util/util.c (virTypedParameterArrayClear): Likewise. * src/util/virtypedparam.c: New file. * po/POTFILES.in: Mark file for translation. * src/Makefile.am (UTIL_SOURCES): Build it. * src/libvirt_private.syms (util.h): Split... (virtypedparam.h): to new section. (virkeycode.h): Sort. * daemon/remote.c: Adjust callers. * tools/virsh.c: Likewise.
2012-01-02 22:03:19 +00:00
src/util/virtypedparam.c
Add _(...) around two error messages in src/util/ The virnetdevtap.c and viruri.c files had two error report messages which were not annotated with _(...) Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-18 10:44:24 +00:00
src/util/viruri.c
Rename hostusb.{c,h} to virusb.{c,h}
2012-12-12 17:04:51 +00:00
src/util/virusb.c
Rename util.{c,h} to virutil.{c,h}
2012-12-13 17:44:57 +00:00
src/util/virutil.c
Rename xml.{c,h} to virxml.{c,h}
2012-12-13 18:13:21 +00:00
src/util/virxml.c
vbox: Add glue layer for MSCOM on Windows Don't require dlopen, but link to ole32 and oleaut32 on Windows. Don't expose g_pVBoxFuncs anymore. It was only used to get the version of the API. Make VBoxCGlueInit return the version instead. This simplifies the implementation of the MSCOM glue layer. Get the VirtualBox version from the registry. Add a dummy implementation of the nsIEventQueue to the MSCOM glue as there seems to be no direct equivalent with MSCOM. It might be implemented using the normal window message loop. This requires additional investigation.
2010-12-14 22:07:57 +00:00
src/vbox/vbox_MSCOMGlue.c
vbox: Stop hardcoding a single path for VBoxXPCOMC.so This partly reverts df90ca7661b0a789bd790ccf8258a4527c13eb8d. Don't disable the VirtualBox driver when configure can't find VBoxXPCOMC.so, rely on detection at runtime again instead. Keep --with-vbox=/path/to/virtualbox intact, added to for: https://bugzilla.redhat.com/show_bug.cgi?id=609185 Detection order for VBoxXPCOMC.so: 1. VBOX_APP_HOME environment variable 2. configure provided location 3. hardcoded list of known locations 4. dynamic linker search path Also cleanup the glue code and improve error reporting.
2010-10-22 19:25:03 +00:00
src/vbox/vbox_XPCOMCGlue.c
Update POTFILES, and s/write/safewrite/ to appease 'make syntax-check'
2009-05-12 20:44:29 +00:00
src/vbox/vbox_driver.c
vbox: Begin to rewrite, vboxConnectOpen Introduce vbox_uniformed_api to deal with version conflicts. Use vbox_install_api to register the currect vboxUniformedAPI with vbox version. vboxConnectOpen has been rewritten.
2014-08-11 10:06:04 +00:00
src/vbox/vbox_common.c
vbox: Rewrite vboxNetworkUndefineDestroy This patch rewrites two public APIs. They are vboxNetworkUndefine and vboxNetworkDestroy. They use the same core function vboxNetworkUndefineDestroy. I merged it in one patch.
2014-10-02 03:30:35 +00:00
src/vbox/vbox_network.c
vbox: Rewrite vboxStoragePoolNumOfVolumes We use typedef IMedium IHardDisk to make IHardDisk hierachy from IMedium (Actually it did on vbox 2.2 and 3.0's C++ API). So when calling VBOX_MEDIUM_FUNC_ARG*(IHardDisk, func, args) we can directly replace it to gVBoxAPI.UIMedium.func(IHardDisk, args) When dealing with this two types, we get some rules from it's hierachy relationship. When using IHardDisk and IMedium as input, we can't transfer a IMedium to IHardDisk. Like: gVBoxAPI.UIHardDisk.func(IHardDisk *hardDisk, args) Here, we can't put a *IMedium as a argument. When using IHardDisk and IMedium as output, we can't transfer a IHardDisk to IMedium. Like: gVBoxAPI.UIMachine.GetMedium(IMedium **out) Here, we can't put a **IHardDisk as a argument. If this case do happen, we either change the API to GetHardDisk or write a new one.
2014-10-24 01:46:39 +00:00
src/vbox/vbox_storage.c
Add vbox_snapshot_conf struct This structure contains the data to be saved in the VirtualBox XML file and can be manipulated with severals exposed functions. The structure is created by vboxSnapshotLoadVboxFile taking the machine XML file. It also can rewrite the XML by using vboxSnapshotSaveVboxFile.
2014-05-19 12:47:31 +00:00
src/vbox/vbox_snapshot_conf.c
Ensure VirtualBox domain IDs start from 1 instead of 0
2009-04-21 19:13:23 +00:00
src/vbox/vbox_tmpl.c
Add VMware Workstation and Player driver
2010-12-17 10:28:20 +00:00
src/vmware/vmware_conf.c
src/vmware/vmware_driver.c
esx: Move VMX handling code out of the driver directory Now the VMware driver doesn't depend on the ESX driver anymore. Add a WITH_VMX option that depends on WITH_ESX and WITH_VMWARE. Also add a libvirt_vmx.syms file. Move some escaping functions from esx_util.c to vmx.c. Adapt the test suite, ESX and VMware driver to the new code layout.
2010-12-21 21:39:55 +00:00
src/vmx/vmx.c
xen: Replace statsErrorFunc with a macro Also mark error messages in block_stats.c for translation, add the new macro to the msg_gen functions in cfg.mk and add block_stats.c to po/POTFILES.in
2011-04-16 09:30:40 +00:00
src/xen/block_stats.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/xen/xen_driver.c
src/xen/xen_hypervisor.c
src/xen/xen_inotify.c
maint: update po/POTFILES.in * po/POTFILES.in: Add 3 files.
2010-05-20 06:59:01 +00:00
src/xen/xend_internal.c
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
src/xen/xm_internal.c
src/xen/xs_internal.c
maint: mark xenapiSessionErrorHandler messages for translation * cfg.mk (msg_gen_function): Add xenapiSessionErrorHandler. * po/POTFILES.in: Add src/xenapi/xenapi_driver.c * src/xenapi/xenapi_driver.c: Mark strings for translation. * src/xenapi/xenapi_utils.c (xenapiUtil_ParseQuery):
2010-03-31 10:24:25 +00:00
src/xenapi/xenapi_driver.c
fix two "make syntax check" failures * src/xenapi/xenapi_driver.c (xenapiOpen): Remove useless-if-before-free. * po/POTFILES.in: Add src/xenapi/xenapi_utils.c.
2010-03-16 18:32:05 +00:00
src/xenapi/xenapi_utils.c
src/xenconfig: move common parsing/formatting to xen_common XM and XL config are very similar. Disks are specified differently in XL, but the old XM disk config is still supported by XL. XL also supports new config like spice that was never supported by XM. This patch moves all the common parsing and formatting functions to the new file xen_common.c and adapts the XM parser/formatter accordingly. This restructuring paves way for introducing an XL parser/formatter in the future. While moving the code, fixup whitespace, comments, and style issues. Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2014-08-16 02:52:15 +00:00
src/xenconfig/xen_common.c
xen: rename xenxs to xenconfig src/xenxs contains parsing/formating functions for the various xen config formats, and is better named src/xenconfig. Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2014-08-14 18:43:32 +00:00
src/xenconfig/xen_sxpr.c
Introduce support for parsing/formatting Xen xl config format Introduce a parser/formatter for the xl config format. Since the deprecation of xm/xend, the VM config file format has diverged as new features are added to libxl. This patch adds support for parsing and formating the xl config format. It supports the existing xm config format, plus adds support for spice graphics and xl disk config syntax. Disk config is specified a bit differently in xl as compared to xm. In xl, disk config consists of comma-separated positional parameters and keyword/value pairs separated by commas. Positional parameters are specified as follows target, format, vdev, access Supported keys for key=value options are devtype, backendtype The positional paramters can also be specified in key/value form. For example the following xl disk config are equivalent /dev/vg/guest-volume,,hda /dev/vg/guest-volume,raw,hda,rw format=raw, vdev=hda, access=rw, target=/dev/vg/guest-volume See $xen_sources/docs/misc/xl-disk-configuration.txt for more details. xl disk config is parsed with the help of xlu_disk_parse() from libxlutil, libxl's utility library. Although the library exists in all Xen versions supported by the libxl virt driver, only recently has the corresponding header file been included. A check for the header is done in configure.ac. If not found, xlu_disk_parse() is declared externally. Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-01-10 00:12:52 +00:00
src/xenconfig/xen_xl.c
xen: rename xenxs to xenconfig src/xenxs contains parsing/formating functions for the various xen config formats, and is better named src/xenconfig. Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2014-08-14 18:43:32 +00:00
src/xenconfig/xen_xm.c
Convert polkit code to use DBus API instead of CLI helper Spawning the pkcheck program every time a permission check is required is hugely expensive on CPU. The pkcheck program is just a dumb wrapper for the DBus API, so rewrite the code to use the DBus API directly. This also simplifies error handling a bit. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-10 13:52:48 +00:00
tests/virpolkittest.c
tools: Only install guests init script if --with-init=script=redhat Most of this deals with moving the libvirt-guests.sh script which does all the work to /usr/libexec, so it can be shared by both systemd and traditional init. Previously systemd depended on the script being in /etc/init.d Required to fix https://bugzilla.redhat.com/show_bug.cgi?id=789747
2012-10-21 02:29:51 +00:00
tools/libvirt-guests.sh.in
Misc syntax-check fixes
2009-09-16 16:26:27 +00:00
tools/virsh.c
tools: rename console.[ch] to virsh-console.[ch] and fix coding style
2013-08-26 09:53:43 +00:00
tools/virsh-console.c
virsh: Split cmds for domain monitoring from virsh.c This splits commands commands to monitor domain status into virsh-domain-monitor.c. The helpers not for common use are moved too. Standard copyright is added. * tools/virsh.c: - Remove commands for domain monitoring group and a few helpers ( vshDomainIOErrorToString, vshGetDomainDescription, vshDomainControlStateToString, vshDomainStateToString) not for common use. - Remove (incldue "intprops.h"). * tools/virsh-domain-monitor.c: - New file, filled with commands of domain monitor group. - Add "intprops.h". * cfg.mk: - Skip strcase checking for virsh-domain-monitor.c - Skip to check config.h including for virsh-domain-monitor.c * po/POTFILES.in - Add virsh-domain-monitor.c
2012-07-24 08:24:50 +00:00
tools/virsh-domain-monitor.c
virsh: Split cmds of domain group from virsh.c This splits commands to manage domain into virsh-domain.c,The helpers not for common use are moved into them too. Standard copyright is added for the new file. * tools/virsh.c: - Remove commands for domain group, and one helper (vshDomainVcpuStateToString) - vshStreamSink is moved before commands's definition for it's also used by commands not of domain group, such as volUpload. * tools/virsh-domain.c: - New file, commands for domain group and the one helper are moved into it. * po/POTFILES.in: - Add virsh-domain.c * cfg.mk: - Skip to check config.h including for virsh-domain.c
2012-07-25 15:37:18 +00:00
tools/virsh-domain.c
virsh: Switch from generated cmd*Edit commands to nongenerated Currently, we either generate some cmd*Edit commands (cmdPoolEdit and cmdNetworkEdit) via sed script or copy the body of cmdEdit (e.g. cmdInterfaceEdit, cmdNWFilterEdit, etc.). This fact makes it harder to implement any new feature to our editing system. Therefore switch to new implementation - define macros to: - dump XML (EDIT_GET_XML) - take an action if XML wasn't changed, usually just vshPrint() (EDIT_NOT_CHANGED) - define new object (EDIT_DEFINE) - the edited XML is in @doc_edited - free object defined by EDIT_DEFINE (EDIT_FREE) and #include "virsh-edit.c"
2012-05-17 15:08:53 +00:00
tools/virsh-edit.c
virsh: Split cmds in host group from virsh.c Commands in host group moved from virsh.c to virsh-host.c, * virsh.c: Remove commands in host group. * virsh-host.c: New file, filled with commands in host group * po/POTFILES.in: Add virsh-host.c * cfg.mk: Skip to check config.h including for virsh-host.c
2012-07-23 06:37:50 +00:00
tools/virsh-host.c
virsh: Split cmds to manage host interface from virsh.c Commands to manage host interface are moved from virsh.c to virsh-interface.c, with a few helpers for interface command use. * virsh.c: Remove interface commands and a few helpers. (vshCommandOptInterface, vshCommandOptInterfaceBy) * virsh-interface.c: New file, filled with interface commands and its helpers. * cfg.mk: Skip to check config.h including for virsh-interface.c * po/POTFILES.in: Add virsh-interface.c
2012-07-24 08:56:49 +00:00
tools/virsh-interface.c
virsh: Split cmds to manage network from virsh.c Commands to manage network are moved from virsh.c to virsh-network.c, with a few helpers for network command use. * virsh.c: Remove network commands and a few helpers. * virsh-network.c: New file, filled with network commands and its helpers. * po/POTFILES.in: Add virsh-network.c * cfg.mk: Skip to check config.h including for virsh-network.c
2012-07-23 06:02:14 +00:00
tools/virsh-network.c
virsh: Split cmds in node device group from virsh.c Commands in node device group moved from virsh.c to virsh-nodedev.c, * virsh.c: Remove commands in node device group. * virsh-nodedev.c: New file, filled with commands in node device group * po/POTFILES.in: Add virsh-nodedev.c * cfg.mk: Skip to check config.h including for virsh-nodedev.c
2012-07-23 07:08:39 +00:00
tools/virsh-nodedev.c
virsh: Split cmds to manage network filter from virsh.c Commands to manage network filter are moved from virsh.c to virsh-nwfilter.c, with a few helpers for network filter command use. * virsh.c: Remove network filter commands and a few helpers. (vshCommandOptNWFilter, and vshCommandOptNWFilterBy) * virsh-nwfilter.c: New file, filled with network filter commands and its helpers. * po/POTFILES.in: Add virsh-nwfilter.c * cfg.mk: Skip to check config.h including for virsh-nwfilter.c
2012-07-23 06:15:55 +00:00
tools/virsh-nwfilter.c
virsh: Split cmds of storage pool group from virsh.c This splits commands of storage pool group into virsh-pool.c, The helpers not for common use are moved too. Standard copyright is added for the new file. * tools/virsh.c: Remove commands for storage storage pool and a few helpers. (vshCommandOptVol, vshCommandOptVolBy). * tools/virsh-pool.c: New file, filled with commands of storage pool group and its helpers. * po/POTFILES.in: Add virsh-pool.c * cfg.mk: Skip to check config.h including for virsh-pool.c
2012-07-24 08:49:27 +00:00
tools/virsh-pool.c
virsh: Split cmds to manage secret from virsh.c Commands to manage secret are moved from virsh.c to virsh-secret.c, with a few helpers for secret command use. * virsh.c: Remove secret commands and a few helpers. (vshCommandOptSecret, and vshCommandOptSecretBy) * virsh-secret.c: New file, filled with secret commands and its helpers. * po/POTFILES.in: Add virsh-secret.c * cfg.mk: Skip to check config.h including for virsh-secret.c
2012-07-23 06:18:51 +00:00
tools/virsh-secret.c
virsh: Split cmds to manage domain snapshot from virsh.c Commands to manage domain snapshot are moved from virsh.c to virsh-snapshot.c. * virsh.c: Remove domain snapshot commands. * virsh-snapshot.c: New file, filled with domain snapshot commands. * po/POTFILES.in: Add virsh-snapshot.c * cfg.mk: Skip strcase and config.h including checking for virsh-snapshot.c
2012-07-23 06:23:00 +00:00
tools/virsh-snapshot.c
virsh: Split cmds of storage volume group from virsh.c This splits commands of storage volume group into virsh-volume.c, The helpers not for common use are moved too. Standard copyright is added for the new file. * tools/virsh.c: Remove commands for storage storage volume and a few helpers. (vshCommandOptVol, vshCommandOptVolBy). * tools/virsh-volume.c: New file, filled with commands of storage volume group and its helpers. * po/POTFILES.in: Add virsh-volume.c * cfg.mk: Skip to check config.h including for virsh-volume.c
2012-07-24 08:44:49 +00:00
tools/virsh-volume.c
virt-admin: Introduce first working skeleton This patch introduces virt-admin client which is based on virsh client, but had to reimplement several methods to meet virt-admin specific needs or remove unnecessary virsh specific logic.
2015-10-12 15:07:21 +00:00
tools/virt-admin.c
Add a virt-host-validate command to sanity check HV config To assist people in verifying that their host is operating in an optimal manner, provide a 'virt-host-validate' command. For each type of hypervisor, it will check any pre-requisites, or other good recommendations and report what's working & what is not. eg # virt-host-validate QEMU: Checking for device /dev/kvm : FAIL (Check that the 'kvm-intel' or 'kvm-amd' modules are loaded & the BIOS has enabled virtualization) QEMU: Checking for device /dev/vhost : WARN (Load the 'vhost_net' module to improve performance of virtio networking) QEMU: Checking for device /dev/net/tun : PASS LXC: Checking for Linux >= 2.6.26 : PASS This warns people if they have vmx/svm, but don't have /dev/kvm. It also warns about missing /dev/vhost net.
2012-01-10 17:31:21 +00:00
tools/virt-host-validate-common.c
tools/virt-host-validate-lxc.c
tools/virt-host-validate-qemu.c
tools/virt-host-validate.c
Introduce a virt-login-shell binary Add a virt-login-shell binary that can be set as a user's shell, such that when they login, it causes them to enter the LXC container with a name matching their user name. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-08 15:36:31 +00:00
tools/virt-login-shell.c
tools: Introduce new client generic module vsh In order to share as much virsh' logic as possible with upcomming virt-admin client we need to split virsh logic into virsh specific and client generic features. Since majority of virsh methods should be generic enough to be used by other clients, it's much easier to rename virsh specific data to virshX than doing this vice versa. It moved generic virsh commands (including info and opts structures) to generic module vsh.c. Besides renaming methods and structures, this patch also involves introduction of a client specific control structure being referenced as private data in the original control structure, introduction of a new global vsh Initializer, which currently doesn't do much, but there is a potential for added functionality in the future. Lastly it introduced client hooks which are especially necessary during client connecting phase.
2015-06-15 16:53:58 +00:00
tools/vsh.c
tools/vsh.h
Reference in New Issue Copy Permalink