External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-11-05 04:41:20 +00:00
Code Issues Packages Projects Releases Wiki Activity
dd0529b319
libvirt/po/POTFILES.in

374 lines
12 KiB
Plaintext
Raw Normal View History

po: change the format of POTFILES.in There is no need to provide relative paths to the current directory if we provide search paths using --directory option for xgettext. In addition it will make libvirt.pot file look cleaner as it will not contain relative paths to current directory. It improves the situation for developers which are using different build path as that would change the relative path in libvirt.pot as well. After this patch it will not happen anymore. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-29 15:36:45 +00:00
@BUILDDIR@src/access/viraccessapicheck.c
@BUILDDIR@src/access/viraccessapichecklxc.c
@BUILDDIR@src/access/viraccessapicheckqemu.c
@BUILDDIR@src/admin/admin_client.h
@BUILDDIR@src/admin/admin_server_dispatch_stubs.h
@BUILDDIR@src/remote/remote_client_bodies.h
@BUILDDIR@src/remote/remote_daemon_dispatch_stubs.h
@SRCDIR@src/access/viraccessdriverpolkit.c
@SRCDIR@src/access/viraccessmanager.c
@SRCDIR@src/admin/admin_server.c
@SRCDIR@src/admin/admin_server_dispatch.c
@SRCDIR@src/admin/libvirt-admin.c
@SRCDIR@src/bhyve/bhyve_capabilities.c
@SRCDIR@src/bhyve/bhyve_command.c
@SRCDIR@src/bhyve/bhyve_domain.c
@SRCDIR@src/bhyve/bhyve_driver.c
@SRCDIR@src/bhyve/bhyve_monitor.c
@SRCDIR@src/bhyve/bhyve_parse_command.c
@SRCDIR@src/bhyve/bhyve_process.c
@SRCDIR@src/conf/backup_conf.c
@SRCDIR@src/conf/capabilities.c
@SRCDIR@src/conf/checkpoint_conf.c
@SRCDIR@src/conf/cpu_conf.c
@SRCDIR@src/conf/device_conf.c
@SRCDIR@src/conf/domain_addr.c
@SRCDIR@src/conf/domain_capabilities.c
@SRCDIR@src/conf/domain_conf.c
@SRCDIR@src/conf/domain_event.c
domain_conf: move boot timeouts check to domain_validate.c This patch creates a new function, virDomainDefBootValidate(), to host the validation of boot menu timeout and rebootTimeout outside of parse time. The checks in virDomainDefParseBootXML() were changed to throw VIR_ERR_XML_ERROR in case of parse error of those values. In an attempt to alleviate the amount of code being stacked inside domain_conf.c, let's put this new function in a new domain_validate.c file that will be used to place these validations. Suggested-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-12-02 19:48:34 +00:00
@SRCDIR@src/conf/domain_validate.c
po: change the format of POTFILES.in There is no need to provide relative paths to the current directory if we provide search paths using --directory option for xgettext. In addition it will make libvirt.pot file look cleaner as it will not contain relative paths to current directory. It improves the situation for developers which are using different build path as that would change the relative path in libvirt.pot as well. After this patch it will not happen anymore. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-29 15:36:45 +00:00
@SRCDIR@src/conf/interface_conf.c
@SRCDIR@src/conf/netdev_bandwidth_conf.c
@SRCDIR@src/conf/netdev_vlan_conf.c
@SRCDIR@src/conf/netdev_vport_profile_conf.c
@SRCDIR@src/conf/network_conf.c
@SRCDIR@src/conf/networkcommon_conf.c
@SRCDIR@src/conf/node_device_conf.c
@SRCDIR@src/conf/node_device_util.c
@SRCDIR@src/conf/numa_conf.c
@SRCDIR@src/conf/nwfilter_conf.c
@SRCDIR@src/conf/nwfilter_params.c
@SRCDIR@src/conf/object_event.c
@SRCDIR@src/conf/secret_conf.c
@SRCDIR@src/conf/snapshot_conf.c
@SRCDIR@src/conf/storage_adapter_conf.c
@SRCDIR@src/conf/storage_conf.c
util: move virStorageEncryption code into conf The code handles XML bits and internal definition and should be in conf directory. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-12-08 15:54:30 +00:00
@SRCDIR@src/conf/storage_encryption_conf.c
util: move virStorageSource code into conf The code handles XML bits and internal definition and should be in conf directory. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-01-21 14:44:53 +00:00
@SRCDIR@src/conf/storage_source_conf.c
po: change the format of POTFILES.in There is no need to provide relative paths to the current directory if we provide search paths using --directory option for xgettext. In addition it will make libvirt.pot file look cleaner as it will not contain relative paths to current directory. It improves the situation for developers which are using different build path as that would change the relative path in libvirt.pot as well. After this patch it will not happen anymore. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-29 15:36:45 +00:00
@SRCDIR@src/conf/virchrdev.c
@SRCDIR@src/conf/virdomainmomentobjlist.c
@SRCDIR@src/conf/virdomainobjlist.c
@SRCDIR@src/conf/virnetworkobj.c
@SRCDIR@src/conf/virnetworkportdef.c
@SRCDIR@src/conf/virnodedeviceobj.c
@SRCDIR@src/conf/virnwfilterbindingdef.c
@SRCDIR@src/conf/virnwfilterbindingobj.c
@SRCDIR@src/conf/virnwfilterbindingobjlist.c
@SRCDIR@src/conf/virnwfilterobj.c
@SRCDIR@src/conf/virsavecookie.c
@SRCDIR@src/conf/virsecretobj.c
@SRCDIR@src/conf/virstorageobj.c
@SRCDIR@src/cpu/cpu.c
@SRCDIR@src/cpu/cpu_arm.c
@SRCDIR@src/cpu/cpu_map.c
@SRCDIR@src/cpu/cpu_ppc64.c
@SRCDIR@src/cpu/cpu_s390.c
@SRCDIR@src/cpu/cpu_x86.c
@SRCDIR@src/datatypes.c
@SRCDIR@src/driver.c
@SRCDIR@src/esx/esx_driver.c
@SRCDIR@src/esx/esx_network_driver.c
@SRCDIR@src/esx/esx_storage_backend_iscsi.c
@SRCDIR@src/esx/esx_storage_backend_vmfs.c
@SRCDIR@src/esx/esx_storage_driver.c
@SRCDIR@src/esx/esx_stream.c
@SRCDIR@src/esx/esx_util.c
@SRCDIR@src/esx/esx_util.h
@SRCDIR@src/esx/esx_vi.c
@SRCDIR@src/esx/esx_vi_methods.c
@SRCDIR@src/esx/esx_vi_types.c
@SRCDIR@src/hyperv/hyperv_driver.c
hyperv: implement connectListAllNetworks and connectNumOfNetworks Co-authored-by: Dawid Zamirski <dzamirski@datto.com> Signed-off-by: Matt Coleman <matt@datto.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-02 00:48:41 +00:00
@SRCDIR@src/hyperv/hyperv_network_driver.c
po: change the format of POTFILES.in There is no need to provide relative paths to the current directory if we provide search paths using --directory option for xgettext. In addition it will make libvirt.pot file look cleaner as it will not contain relative paths to current directory. It improves the situation for developers which are using different build path as that would change the relative path in libvirt.pot as well. After this patch it will not happen anymore. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-29 15:36:45 +00:00
@SRCDIR@src/hyperv/hyperv_util.c
@SRCDIR@src/hyperv/hyperv_wmi.c
@SRCDIR@src/hypervisor/domain_cgroup.c
@SRCDIR@src/hypervisor/domain_driver.c
@SRCDIR@src/hypervisor/virclosecallbacks.c
@SRCDIR@src/hypervisor/virhostdev.c
@SRCDIR@src/interface/interface_backend_netcf.c
@SRCDIR@src/interface/interface_backend_udev.c
@SRCDIR@src/internal.h
@SRCDIR@src/libvirt-domain-checkpoint.c
@SRCDIR@src/libvirt-domain-snapshot.c
@SRCDIR@src/libvirt-domain.c
@SRCDIR@src/libvirt-host.c
@SRCDIR@src/libvirt-lxc.c
@SRCDIR@src/libvirt-network.c
@SRCDIR@src/libvirt-nodedev.c
@SRCDIR@src/libvirt-nwfilter.c
@SRCDIR@src/libvirt-qemu.c
@SRCDIR@src/libvirt-secret.c
@SRCDIR@src/libvirt-storage.c
@SRCDIR@src/libvirt-stream.c
@SRCDIR@src/libvirt.c
@SRCDIR@src/libxl/libxl_capabilities.c
@SRCDIR@src/libxl/libxl_conf.c
@SRCDIR@src/libxl/libxl_domain.c
@SRCDIR@src/libxl/libxl_driver.c
@SRCDIR@src/libxl/libxl_migration.c
@SRCDIR@src/libxl/xen_common.c
@SRCDIR@src/libxl/xen_xl.c
@SRCDIR@src/libxl/xen_xm.c
@SRCDIR@src/locking/lock_daemon.c
@SRCDIR@src/locking/lock_daemon_dispatch.c
@SRCDIR@src/locking/lock_driver_lockd.c
@SRCDIR@src/locking/lock_driver_sanlock.c
@SRCDIR@src/locking/lock_manager.c
@SRCDIR@src/locking/sanlock_helper.c
@SRCDIR@src/logging/log_daemon.c
@SRCDIR@src/logging/log_daemon_dispatch.c
@SRCDIR@src/logging/log_handler.c
@SRCDIR@src/logging/log_manager.c
@SRCDIR@src/lxc/lxc_cgroup.c
@SRCDIR@src/lxc/lxc_conf.c
@SRCDIR@src/lxc/lxc_container.c
@SRCDIR@src/lxc/lxc_controller.c
@SRCDIR@src/lxc/lxc_domain.c
@SRCDIR@src/lxc/lxc_driver.c
@SRCDIR@src/lxc/lxc_fuse.c
@SRCDIR@src/lxc/lxc_hostdev.c
@SRCDIR@src/lxc/lxc_native.c
@SRCDIR@src/lxc/lxc_process.c
@SRCDIR@src/network/bridge_driver.c
@SRCDIR@src/network/bridge_driver_linux.c
@SRCDIR@src/network/leaseshelper.c
@SRCDIR@src/node_device/node_device_driver.c
@SRCDIR@src/node_device/node_device_udev.c
@SRCDIR@src/nwfilter/nwfilter_dhcpsnoop.c
@SRCDIR@src/nwfilter/nwfilter_driver.c
@SRCDIR@src/nwfilter/nwfilter_ebiptables_driver.c
@SRCDIR@src/nwfilter/nwfilter_gentech_driver.c
@SRCDIR@src/nwfilter/nwfilter_learnipaddr.c
@SRCDIR@src/openvz/openvz_conf.c
@SRCDIR@src/openvz/openvz_driver.c
@SRCDIR@src/openvz/openvz_util.c
@SRCDIR@src/qemu/qemu_agent.c
@SRCDIR@src/qemu/qemu_alias.c
@SRCDIR@src/qemu/qemu_backup.c
@SRCDIR@src/qemu/qemu_block.c
@SRCDIR@src/qemu/qemu_blockjob.c
@SRCDIR@src/qemu/qemu_capabilities.c
@SRCDIR@src/qemu/qemu_cgroup.c
@SRCDIR@src/qemu/qemu_checkpoint.c
@SRCDIR@src/qemu/qemu_command.c
@SRCDIR@src/qemu/qemu_conf.c
@SRCDIR@src/qemu/qemu_dbus.c
@SRCDIR@src/qemu/qemu_domain.c
@SRCDIR@src/qemu/qemu_domain_address.c
@SRCDIR@src/qemu/qemu_domainjob.c
@SRCDIR@src/qemu/qemu_driver.c
@SRCDIR@src/qemu/qemu_extdevice.c
@SRCDIR@src/qemu/qemu_firmware.c
@SRCDIR@src/qemu/qemu_hostdev.c
@SRCDIR@src/qemu/qemu_hotplug.c
@SRCDIR@src/qemu/qemu_interface.c
@SRCDIR@src/qemu/qemu_interop_config.c
@SRCDIR@src/qemu/qemu_migration.c
@SRCDIR@src/qemu/qemu_migration_cookie.c
@SRCDIR@src/qemu/qemu_migration_params.c
@SRCDIR@src/qemu/qemu_monitor.c
@SRCDIR@src/qemu/qemu_monitor_json.c
@SRCDIR@src/qemu/qemu_monitor_text.c
qemu: Separate out namespace handling code The qemu_domain.c file is big as is and we should split it into separate semantic blocks. Start with code that handles domain namespaces. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-07-20 14:18:57 +00:00
@SRCDIR@src/qemu/qemu_namespace.c
po: change the format of POTFILES.in There is no need to provide relative paths to the current directory if we provide search paths using --directory option for xgettext. In addition it will make libvirt.pot file look cleaner as it will not contain relative paths to current directory. It improves the situation for developers which are using different build path as that would change the relative path in libvirt.pot as well. After this patch it will not happen anymore. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-29 15:36:45 +00:00
@SRCDIR@src/qemu/qemu_process.c
@SRCDIR@src/qemu/qemu_qapi.c
qemu: Split of code related to handling of the save image file There's a lot of helper code related to the save image handling. Extract it to qemu_saveimage.c/h. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-07-16 07:54:56 +00:00
@SRCDIR@src/qemu/qemu_saveimage.c
po: change the format of POTFILES.in There is no need to provide relative paths to the current directory if we provide search paths using --directory option for xgettext. In addition it will make libvirt.pot file look cleaner as it will not contain relative paths to current directory. It improves the situation for developers which are using different build path as that would change the relative path in libvirt.pot as well. After this patch it will not happen anymore. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-29 15:36:45 +00:00
@SRCDIR@src/qemu/qemu_slirp.c
qemu: Extract snapshot related code to a separate file We've dumped all the snapshot helpers and related code into qemu_driver.c. It accounted for ~10% of overal size of qemu_driver.c. Separate the code to qemu_snapshot.c/h. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-07-15 13:50:14 +00:00
@SRCDIR@src/qemu/qemu_snapshot.c
po: change the format of POTFILES.in There is no need to provide relative paths to the current directory if we provide search paths using --directory option for xgettext. In addition it will make libvirt.pot file look cleaner as it will not contain relative paths to current directory. It improves the situation for developers which are using different build path as that would change the relative path in libvirt.pot as well. After this patch it will not happen anymore. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-29 15:36:45 +00:00
@SRCDIR@src/qemu/qemu_tpm.c
@SRCDIR@src/qemu/qemu_validate.c
@SRCDIR@src/qemu/qemu_vhost_user.c
@SRCDIR@src/qemu/qemu_vhost_user_gpu.c
@SRCDIR@src/qemu/qemu_virtiofs.c
@SRCDIR@src/remote/remote_daemon.c
@SRCDIR@src/remote/remote_daemon_config.c
@SRCDIR@src/remote/remote_daemon_dispatch.c
@SRCDIR@src/remote/remote_daemon_stream.c
@SRCDIR@src/remote/remote_driver.c
remote: parse the remote transport string earlier We delay converting the remote transport string to enum form until fairly late. As a result we're doing string comparisons when we could be just doing enum comparisons. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-07-08 17:02:50 +00:00
@SRCDIR@src/remote/remote_sockets.c
remote: introduce virt-ssh-helper binary When accessing libvirtd over a SSH tunnel, the remote driver needs a way to proxy the SSH input/output stream to a suitable libvirt daemon. This is currently done by spawning netcat, pointing it to the libvirtd socket path. This is problematic for a number of reasons: - The socket path varies according to the --prefix chosen at build time. The remote client is seeing the local prefix, but what we need is the remote prefix - The socket path varies according to remote env variables, such as the XDG_RUNTIME_DIR location. Again we see the local XDG_RUNTIME_DIR value, but what we need is the remote value (if any) - The remote driver doesn't know whether it must connect to the legacy libvirtd or the modular daemons, so must always assume legacy libvirtd for back-compat. This means we'll always end up using the virtproxyd daemon adding an extra hop in the RPC layer. - We can not able to autospawn the libvirtd daemon for session mode access To address these problems this patch introduces the 'virtd-ssh-helper' program which takes the URI for the remote driver as a CLI parameter. It then figures out which daemon to connect to and its socket path, using the same code that the remote driver client would on the remote host's build of libvirt. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-08 15:38:49 +00:00
@SRCDIR@src/remote/remote_ssh_helper.c
po: change the format of POTFILES.in There is no need to provide relative paths to the current directory if we provide search paths using --directory option for xgettext. In addition it will make libvirt.pot file look cleaner as it will not contain relative paths to current directory. It improves the situation for developers which are using different build path as that would change the relative path in libvirt.pot as well. After this patch it will not happen anymore. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-29 15:36:45 +00:00
@SRCDIR@src/rpc/virkeepalive.c
@SRCDIR@src/rpc/virnetclient.c
@SRCDIR@src/rpc/virnetclientprogram.c
@SRCDIR@src/rpc/virnetclientstream.c
@SRCDIR@src/rpc/virnetdaemon.c
@SRCDIR@src/rpc/virnetlibsshsession.c
@SRCDIR@src/rpc/virnetmessage.c
@SRCDIR@src/rpc/virnetsaslcontext.c
@SRCDIR@src/rpc/virnetserver.c
@SRCDIR@src/rpc/virnetserverclient.c
@SRCDIR@src/rpc/virnetserverprogram.c
@SRCDIR@src/rpc/virnetserverservice.c
@SRCDIR@src/rpc/virnetsocket.c
@SRCDIR@src/rpc/virnetsshsession.c
@SRCDIR@src/rpc/virnettlscontext.c
@SRCDIR@src/secret/secret_driver.c
@SRCDIR@src/security/security_apparmor.c
@SRCDIR@src/security/security_dac.c
@SRCDIR@src/security/security_driver.c
@SRCDIR@src/security/security_manager.c
@SRCDIR@src/security/security_selinux.c
@SRCDIR@src/security/security_util.c
@SRCDIR@src/security/virt-aa-helper.c
@SRCDIR@src/storage/parthelper.c
@SRCDIR@src/storage/storage_backend.c
@SRCDIR@src/storage/storage_backend_disk.c
@SRCDIR@src/storage/storage_backend_fs.c
@SRCDIR@src/storage/storage_backend_gluster.c
@SRCDIR@src/storage/storage_backend_iscsi.c
@SRCDIR@src/storage/storage_backend_iscsi_direct.c
@SRCDIR@src/storage/storage_backend_logical.c
@SRCDIR@src/storage/storage_backend_mpath.c
@SRCDIR@src/storage/storage_backend_rbd.c
@SRCDIR@src/storage/storage_backend_scsi.c
@SRCDIR@src/storage/storage_backend_sheepdog.c
@SRCDIR@src/storage/storage_backend_vstorage.c
@SRCDIR@src/storage/storage_backend_zfs.c
@SRCDIR@src/storage/storage_driver.c
@SRCDIR@src/storage/storage_util.c
util: move virStorageFileBackend code into storage_file It's used only by storage file code so it doesn't make sense to have it in util directory. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-01-22 09:37:33 +00:00
@SRCDIR@src/storage_file/storage_file_backend.c
storage: move storage file sources to separate directory Introduce a new storage_file directory where we will keep storage file related code. Add a backend prefix to the file name to separate it from other future files with 'storage_file' prefix. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-12-02 12:10:59 +00:00
@SRCDIR@src/storage_file/storage_file_backend_fs.c
@SRCDIR@src/storage_file/storage_file_backend_gluster.c
util: move virStorageFileProbe code into storage_file Same as virStorageFileBackend, it doesn't belong into util directory. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-01-22 09:39:10 +00:00
@SRCDIR@src/storage_file/storage_file_probe.c
util: extract virStorageFile code into storage_source Up until now we had a runtime code and XML related code in the same source file inside util directory. This patch takes the runtime part and extracts it into the new storage_file directory. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-01-22 09:36:21 +00:00
@SRCDIR@src/storage_file/storage_source.c
storage_source: Move backing store parsers into new file The parsers for the backing store strings are relatively self-contained and rather massive piece of code. Move them to a new module called storage_source_backingstore. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-01-22 15:03:53 +00:00
@SRCDIR@src/storage_file/storage_source_backingstore.c
po: change the format of POTFILES.in There is no need to provide relative paths to the current directory if we provide search paths using --directory option for xgettext. In addition it will make libvirt.pot file look cleaner as it will not contain relative paths to current directory. It improves the situation for developers which are using different build path as that would change the relative path in libvirt.pot as well. After this patch it will not happen anymore. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-29 15:36:45 +00:00
@SRCDIR@src/test/test_driver.c
@SRCDIR@src/util/iohelper.c
@SRCDIR@src/util/viralloc.c
@SRCDIR@src/util/virarptable.c
@SRCDIR@src/util/viraudit.c
@SRCDIR@src/util/virauth.c
@SRCDIR@src/util/virauthconfig.c
@SRCDIR@src/util/virbitmap.c
@SRCDIR@src/util/vircgroup.c
@SRCDIR@src/util/vircgroupbackend.c
@SRCDIR@src/util/vircgroupbackend.h
@SRCDIR@src/util/vircgroupv1.c
@SRCDIR@src/util/vircgroupv2.c
@SRCDIR@src/util/vircgroupv2devices.c
@SRCDIR@src/util/vircommand.c
@SRCDIR@src/util/virconf.c
@SRCDIR@src/util/vircrypto.c
@SRCDIR@src/util/virdaemon.c
virdevmapper: Don't use libdevmapper to obtain dependencies CVE-2020-14339 When building domain's private /dev in a namespace, libdevmapper is consulted for getting full dependency tree of domain's disks. The reason is that for a multipath devices all dependent devices must be created in the namespace and allowed in CGroups. However, this approach is very fragile as building of namespace happens in the forked off child process, after mass close of FDs and just before dropping privileges and execing QEMU. And it so happens that when calling libdevmapper APIs, one of them opens /dev/mapper/control and saves the FD into a global variable. The FD is kept open until the lib is unlinked or dm_lib_release() is called explicitly. We are doing neither. However, the virDevMapperGetTargets() function is called also from libvirtd (when setting up CGroups) and thus has to be thread safe. Unfortunately, libdevmapper APIs are not thread safe (nor async signal safe) and thus we can't use them. Reimplement what libdevmapper would do using plain C (ioctl()-s, /proc/devices parsing, /dev/mapper dirwalking, and so on). Fixes: a30078cb832646177defd256e77c632905f1e6d0 Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1858260 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-07-23 14:02:00 +00:00
@SRCDIR@src/util/virdevmapper.c
po: change the format of POTFILES.in There is no need to provide relative paths to the current directory if we provide search paths using --directory option for xgettext. In addition it will make libvirt.pot file look cleaner as it will not contain relative paths to current directory. It improves the situation for developers which are using different build path as that would change the relative path in libvirt.pot as well. After this patch it will not happen anymore. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-29 15:36:45 +00:00
@SRCDIR@src/util/virdnsmasq.c
@SRCDIR@src/util/virerror.c
@SRCDIR@src/util/virerror.h
@SRCDIR@src/util/virevent.c
@SRCDIR@src/util/vireventthread.c
@SRCDIR@src/util/virfcp.c
@SRCDIR@src/util/virfdstream.c
@SRCDIR@src/util/virfile.c
@SRCDIR@src/util/virfilecache.c
@SRCDIR@src/util/virfirewall.c
@SRCDIR@src/util/virfirewalld.c
@SRCDIR@src/util/virfirmware.c
util: introduce helpers for GLib DBus implementation With libdbus our wrappers had a special syntax to create the DBus messages by defining the DBus message signature followed by list of arguments providing data based on the signature. There will be no similar helper with GLib implementation as they provide same functionality via GVariant APIs. The syntax is slightly different mostly for how arrays, variadic types and dictionaries are created/parsed. Additional difference is that with GLib DBus everything is wrapped in extra tuple (struct). For more details refer to the documentation [1]. [1] <https://developer.gnome.org/glib/stable/gvariant-format-strings.html> Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-08 11:55:24 +00:00
@SRCDIR@src/util/virgdbus.c
po: change the format of POTFILES.in There is no need to provide relative paths to the current directory if we provide search paths using --directory option for xgettext. In addition it will make libvirt.pot file look cleaner as it will not contain relative paths to current directory. It improves the situation for developers which are using different build path as that would change the relative path in libvirt.pot as well. After this patch it will not happen anymore. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-29 15:36:45 +00:00
@SRCDIR@src/util/virhash.c
@SRCDIR@src/util/virhook.c
@SRCDIR@src/util/virhostcpu.c
@SRCDIR@src/util/virhostmem.c
@SRCDIR@src/util/virhostuptime.c
@SRCDIR@src/util/viridentity.c
@SRCDIR@src/util/virinitctl.c
@SRCDIR@src/util/viriptables.c
@SRCDIR@src/util/viriscsi.c
@SRCDIR@src/util/virjson.c
@SRCDIR@src/util/virlease.c
@SRCDIR@src/util/virlockspace.c
@SRCDIR@src/util/virlog.c
@SRCDIR@src/util/virmacmap.c
@SRCDIR@src/util/virmdev.c
@SRCDIR@src/util/virmodule.c
@SRCDIR@src/util/virnetdev.c
@SRCDIR@src/util/virnetdevbandwidth.c
@SRCDIR@src/util/virnetdevbridge.c
@SRCDIR@src/util/virnetdevip.c
@SRCDIR@src/util/virnetdevmacvlan.c
@SRCDIR@src/util/virnetdevmidonet.c
@SRCDIR@src/util/virnetdevopenvswitch.c
@SRCDIR@src/util/virnetdevtap.c
@SRCDIR@src/util/virnetdevveth.c
@SRCDIR@src/util/virnetdevvportprofile.c
@SRCDIR@src/util/virnetlink.c
@SRCDIR@src/util/virnodesuspend.c
@SRCDIR@src/util/virnuma.c
@SRCDIR@src/util/virnvme.c
@SRCDIR@src/util/virobject.c
@SRCDIR@src/util/virpci.c
@SRCDIR@src/util/virperf.c
@SRCDIR@src/util/virpidfile.c
@SRCDIR@src/util/virpolkit.c
@SRCDIR@src/util/virportallocator.c
@SRCDIR@src/util/virprocess.c
@SRCDIR@src/util/virqemu.c
@SRCDIR@src/util/virrandom.c
@SRCDIR@src/util/virresctrl.c
@SRCDIR@src/util/virrotatingfile.c
@SRCDIR@src/util/virscsi.c
@SRCDIR@src/util/virscsihost.c
@SRCDIR@src/util/virscsivhost.c
@SRCDIR@src/util/virsecret.c
@SRCDIR@src/util/virsocketaddr.c
@SRCDIR@src/util/virstoragefile.c
@SRCDIR@src/util/virstring.c
@SRCDIR@src/util/virsysinfo.c
@SRCDIR@src/util/virsystemd.c
@SRCDIR@src/util/virthreadjob.c
@SRCDIR@src/util/virthreadpool.c
@SRCDIR@src/util/virtime.c
@SRCDIR@src/util/virtpm.c
@SRCDIR@src/util/virtypedparam-public.c
@SRCDIR@src/util/virtypedparam.c
@SRCDIR@src/util/viruri.c
@SRCDIR@src/util/virusb.c
@SRCDIR@src/util/virutil.c
@SRCDIR@src/util/virvhba.c
@SRCDIR@src/util/virvsock.c
@SRCDIR@src/util/virxml.c
@SRCDIR@src/vbox/vbox_XPCOMCGlue.c
@SRCDIR@src/vbox/vbox_common.c
@SRCDIR@src/vbox/vbox_driver.c
@SRCDIR@src/vbox/vbox_network.c
@SRCDIR@src/vbox/vbox_snapshot_conf.c
@SRCDIR@src/vbox/vbox_storage.c
@SRCDIR@src/vbox/vbox_tmpl.c
@SRCDIR@src/vmware/vmware_conf.c
@SRCDIR@src/vmware/vmware_driver.c
@SRCDIR@src/vmx/vmx.c
@SRCDIR@src/vz/vz_driver.c
@SRCDIR@src/vz/vz_sdk.c
@SRCDIR@src/vz/vz_utils.c
@SRCDIR@src/vz/vz_utils.h
@SRCDIR@tests/virpolkittest.c
@SRCDIR@tools/libvirt-guests.sh.in
@SRCDIR@tools/virsh-backup.c
@SRCDIR@tools/virsh-checkpoint.c
@SRCDIR@tools/virsh-completer-host.c
@SRCDIR@tools/virsh-console.c
@SRCDIR@tools/virsh-domain-monitor.c
@SRCDIR@tools/virsh-domain.c
@SRCDIR@tools/virsh-edit.c
@SRCDIR@tools/virsh-host.c
@SRCDIR@tools/virsh-interface.c
@SRCDIR@tools/virsh-network.c
@SRCDIR@tools/virsh-nodedev.c
@SRCDIR@tools/virsh-nwfilter.c
@SRCDIR@tools/virsh-pool.c
@SRCDIR@tools/virsh-secret.c
@SRCDIR@tools/virsh-snapshot.c
@SRCDIR@tools/virsh-util.c
@SRCDIR@tools/virsh-volume.c
@SRCDIR@tools/virsh.c
@SRCDIR@tools/virsh.h
@SRCDIR@tools/virt-admin.c
@SRCDIR@tools/virt-host-validate-bhyve.c
@SRCDIR@tools/virt-host-validate-common.c
@SRCDIR@tools/virt-host-validate-lxc.c
@SRCDIR@tools/virt-host-validate-qemu.c
@SRCDIR@tools/virt-host-validate.c
@SRCDIR@tools/virt-login-shell-helper.c
@SRCDIR@tools/vsh-table.c
@SRCDIR@tools/vsh.c
@SRCDIR@tools/vsh.h
Reference in New Issue Copy Permalink