External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-11-08 22:39:56 +00:00
Code Issues Packages Projects Releases Wiki Activity
df757e88fd
libvirt/tests/qemuxml2argvdata/fd-memory-numa-topology3.args

38 lines
1.5 KiB
Plaintext
Raw Normal View History

qemu: Add args generation for file memory backing This patch add support for file memory backing on numa topology. The specified access mode in memoryBacking can be overriden by specifying token memAccess in numa cell.
2017-02-02 13:27:33 +00:00
LC_ALL=C \
PATH=/bin \
qemu: command: Override HOME variable for system QEMU By default, qemu user's home dir points to '/' which shouldn't be used at all. We therefore pass the HOME variable from the current variable iff not running as SUID, which means that for systemd we never set it. This patch makes sure, that for system QEMU this is always set to libDir/<driver>, session mode is left untouched. Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-06 12:29:01 +00:00
HOME=/tmp/lib/domain--1-instance-00000092 \
qemu: Add args generation for file memory backing This patch add support for file memory backing on numa topology. The specified access mode in memoryBacking can be overriden by specifying token memAccess in numa cell.
2017-02-02 13:27:33 +00:00
USER=test \
LOGNAME=test \
qemu: command: Enforce setting XDG variables for system QEMU For session mode, only XDG_CACHE_HOME is set, because we want to remain integrating with services in user session, but for system mode, this would have become reading/writing to '/' which carries the obvious issue with permissions (also, '/' is the wrong location in 99.9% cases anyway). Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-08 11:15:07 +00:00
XDG_DATA_HOME=/tmp/lib/domain--1-instance-00000092/.local/share \
XDG_CACHE_HOME=/tmp/lib/domain--1-instance-00000092/.cache \
XDG_CONFIG_HOME=/tmp/lib/domain--1-instance-00000092/.config \
qemu: Add args generation for file memory backing This patch add support for file memory backing on numa topology. The specified access mode in memoryBacking can be overriden by specifying token memAccess in numa cell.
2017-02-02 13:27:33 +00:00
QEMU_AUDIO_DRV=none \
/usr/bin/qemu-system-x86_64 \
qemu: command: Always assume support for '-name guest=' and '-name debug-threads=on' All QEMU versions we support have these and it's very unlikely that they will be removed. Remove the capability checks. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-10 14:39:38 +00:00
-name guest=instance-00000092,debug-threads=on \
qemu: Add args generation for file memory backing This patch add support for file memory backing on numa topology. The specified access mode in memoryBacking can be overriden by specifying token memAccess in numa cell.
2017-02-02 13:27:33 +00:00
-S \
qemu: Always assume presence of QEMU_CAPS_OBJECT_SECRET The secret object is supported since qemu-2.6 and can't be compiled out. Assume the presence to simplify the code. This enables the use of the secret key for most tests not using real caps. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-21 15:50:00 +00:00
-object secret,id=masterKey0,format=raw,file=/tmp/lib/domain--1-instance-00000092/master-key.aes \
tests: qemuxml2argvdata: Purge versioned i440fx machine types from fake-caps tests Use the 'pc' alias for them as it's equivalent. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-01-05 10:52:04 +00:00
-machine pc,usb=off,dump-guest-core=off \
qemu: Switch to -accel We currently use -machine accel=XXX which is just a syntax sugar for -accel XXX. The former doesn't allow specifying arguments for accelerator, because all arguments passed to -machine are treated as arguments of machine itself. The -accel argument was introduced in QEMU commit v2.9.0-rc0~70^2~19 and since our minimum required version is newer (2.11.0) we can safely assume its existence and use it without any capability. Resolves: https://gitlab.com/libvirt/libvirt/-/issues/233 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Tested-by: Kashyap Chamarthy <kchamart@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-11-05 08:38:10 +00:00
-accel kvm \
qemu: Add args generation for file memory backing This patch add support for file memory backing on numa topology. The specified access mode in memoryBacking can be overriden by specifying token memAccess in numa cell.
2017-02-02 13:27:33 +00:00
-m 43008 \
qemu: command: Always assume QEMU_CAPS_OVERCOMMIT Starting with qemu-3.1 we always have the '-overcommit' argument and use it instead of '-realtime'. Remove the capability check and fix all fake-caps tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-02-10 11:57:26 +00:00
-overcommit mem-lock=off \
qemu: Add args generation for file memory backing This patch add support for file memory backing on numa topology. The specified access mode in memoryBacking can be overriden by specifying token memAccess in numa cell.
2017-02-02 13:27:33 +00:00
-smp 32,sockets=1,cores=24,threads=1 \
qemu_command: Generate -mem-prealloc in one corner case more When guest has NUMA nodes and QEMU is new enough to report default RAM ID then ideally we would use -numa memdev= combined with memory-backend-* combo becasue -mem-path/-mem-prealloc/-numa mem are deprecated. Well, there is one problem - the .memdev= attribute is machine type dependent (just look at arguments of virQEMUCapsGetMachineNumaMemSupported()) and to ensure backwards compatibility we prefer -numa mem= over -numa memdev=. But there was one corner case when -mem-prealloc was requested but not generated on the cmd line. It all starts with qemuBuildMemCommandLine() which generates just '-m XXX' and because it sees defaultRAMid and guest NUMA nodes greater than zero it does nothing more. Then, qemuBuildNumaCommandLine() sees that -numa mem= is still supported for given machine type and nothing else set @needBackend thus qemuBuildMemPathStr() is called which output -mem-prealloc only in a few cases assuming it was outputted earlier. Reported-by: Jing Qi <jinqi@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-15 13:59:59 +00:00
-object memory-backend-file,id=ram-node0,mem-path=/var/lib/libvirt/qemu/ram/-1-instance-00000092/ram-node0,share=on,prealloc=on,size=15032385536 \
qemu: Add args generation for file memory backing This patch add support for file memory backing on numa topology. The specified access mode in memoryBacking can be overriden by specifying token memAccess in numa cell.
2017-02-02 13:27:33 +00:00
-numa node,nodeid=0,cpus=0-1,memdev=ram-node0 \
qemu_command: Generate -mem-prealloc in one corner case more When guest has NUMA nodes and QEMU is new enough to report default RAM ID then ideally we would use -numa memdev= combined with memory-backend-* combo becasue -mem-path/-mem-prealloc/-numa mem are deprecated. Well, there is one problem - the .memdev= attribute is machine type dependent (just look at arguments of virQEMUCapsGetMachineNumaMemSupported()) and to ensure backwards compatibility we prefer -numa mem= over -numa memdev=. But there was one corner case when -mem-prealloc was requested but not generated on the cmd line. It all starts with qemuBuildMemCommandLine() which generates just '-m XXX' and because it sees defaultRAMid and guest NUMA nodes greater than zero it does nothing more. Then, qemuBuildNumaCommandLine() sees that -numa mem= is still supported for given machine type and nothing else set @needBackend thus qemuBuildMemPathStr() is called which output -mem-prealloc only in a few cases assuming it was outputted earlier. Reported-by: Jing Qi <jinqi@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-15 13:59:59 +00:00
-object memory-backend-file,id=ram-node1,mem-path=/var/lib/libvirt/qemu/ram/-1-instance-00000092/ram-node1,share=on,prealloc=on,size=15032385536 \
qemu: Add args generation for file memory backing This patch add support for file memory backing on numa topology. The specified access mode in memoryBacking can be overriden by specifying token memAccess in numa cell.
2017-02-02 13:27:33 +00:00
-numa node,nodeid=1,cpus=2-3,memdev=ram-node1 \
qemu_command: Generate -mem-prealloc in one corner case more When guest has NUMA nodes and QEMU is new enough to report default RAM ID then ideally we would use -numa memdev= combined with memory-backend-* combo becasue -mem-path/-mem-prealloc/-numa mem are deprecated. Well, there is one problem - the .memdev= attribute is machine type dependent (just look at arguments of virQEMUCapsGetMachineNumaMemSupported()) and to ensure backwards compatibility we prefer -numa mem= over -numa memdev=. But there was one corner case when -mem-prealloc was requested but not generated on the cmd line. It all starts with qemuBuildMemCommandLine() which generates just '-m XXX' and because it sees defaultRAMid and guest NUMA nodes greater than zero it does nothing more. Then, qemuBuildNumaCommandLine() sees that -numa mem= is still supported for given machine type and nothing else set @needBackend thus qemuBuildMemPathStr() is called which output -mem-prealloc only in a few cases assuming it was outputted earlier. Reported-by: Jing Qi <jinqi@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-15 13:59:59 +00:00
-object memory-backend-file,id=ram-node2,mem-path=/var/lib/libvirt/qemu/ram/-1-instance-00000092/ram-node2,share=off,prealloc=on,size=15032385536 \
qemu: Add args generation for file memory backing This patch add support for file memory backing on numa topology. The specified access mode in memoryBacking can be overriden by specifying token memAccess in numa cell.
2017-02-02 13:27:33 +00:00
-numa node,nodeid=2,cpus=4-5,memdev=ram-node2 \
-uuid 126f2720-6f8e-45ab-a886-ec9277079a67 \
qemu: deprecate QEMU_CAPS_DISPLAY Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-display none \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-user-config \
qemu: Add args generation for file memory backing This patch add support for file memory backing on numa topology. The specified access mode in memoryBacking can be overriden by specifying token memAccess in numa cell.
2017-02-02 13:27:33 +00:00
-nodefaults \
qemu: Always assume QEMU_CAPS_CHARDEV_FD_PASS_COMMANDLINE All qemu versions now support FD passing either directly or via FDset. Assume that we always have this capability so that we can simplify chardev handling in many cases. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-02-03 12:31:28 +00:00
-chardev socket,id=charmonitor,fd=1729,server=on,wait=off \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-28 22:04:58 +00:00
-mon chardev=charmonitor,id=monitor,mode=control \
qemu: deprecate QEMU_CAPS_RTC Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-rtc base=utc \
qemu: deprecate QEMU_CAPS_NO_SHUTDOWN Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-shutdown \
qemu: Add args generation for file memory backing This patch add support for file memory backing on numa topology. The specified access mode in memoryBacking can be overriden by specifying token memAccess in numa cell.
2017-02-02 13:27:33 +00:00
-no-acpi \
qemu: command: Always assume 'QEMU_CAPS_BOOT_STRICT' Added by c8a6ae8bb9 in qemu-v1.5.0 and can't be compiled out. Assume that it's present and fix all fake-caps tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-20 14:22:59 +00:00
-boot strict=on \
qemu: Add args generation for file memory backing This patch add support for file memory backing on numa topology. The specified access mode in memoryBacking can be overriden by specifying token memAccess in numa cell.
2017-02-02 13:27:33 +00:00
-usb \
qemu: command: Always assume support for '-msg timestamp=on' All supported QEMU versions have this option so there's no need for us to base it on the capability. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-10 15:07:10 +00:00
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 \
-msg timestamp=on
Reference in New Issue Copy Permalink