libvirt/tests/qemuxml2xmltest.c

425 lines
12 KiB
C
Raw Normal View History

#include <config.h>
2007-07-18 21:34:22 +00:00
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
2007-07-18 21:34:22 +00:00
#include <string.h>
#include <sys/types.h>
#include <fcntl.h>
#include "testutils.h"
#ifdef WITH_QEMU
# include "internal.h"
# include "qemu/qemu_conf.h"
# include "qemu/qemu_domain.h"
# include "testutilsqemu.h"
# include "virstring.h"
2007-07-18 21:34:22 +00:00
# define VIR_FROM_THIS VIR_FROM_NONE
static virQEMUDriver driver;
2007-07-18 21:34:22 +00:00
static int
testCompareXMLToXMLFiles(const char *inxml, const char *outxml, bool live)
{
char *inXmlData = NULL;
char *outXmlData = NULL;
2007-07-18 21:34:22 +00:00
char *actual = NULL;
int ret = -1;
virDomainDefPtr def = NULL;
selinux: distinguish failure to label from request to avoid label https://bugzilla.redhat.com/show_bug.cgi?id=924153 Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with an attribute relabel='no' in order to try and minimize the impact of shutdown delays when an NFS server disappears. The idea was that if a disk is on NFS and can't be labeled in the first place, there is no need to attempt the (no-op) relabel on domain shutdown. Unfortunately, the way this was implemented was by modifying the domain XML so that the optimization would survive libvirtd restart, but in a way that is indistinguishable from an explicit user setting. Furthermore, once the setting is turned on, libvirt avoids attempts at labeling, even for operations like snapshot or blockcopy where the chain is being extended or pivoted onto non-NFS, where SELinux labeling is once again possible. As a result, it was impossible to do a blockcopy to pivot from an NFS image file onto a local file. The solution is to separate the semantics of a chain that must not be labeled (which the user can set even on persistent domains) vs. the optimization of not attempting a relabel on cleanup (a live-only annotation), and using only the user's explicit notation rather than the optimization as the decision on whether to skip a label attempt in the first place. When upgrading an older libvirtd to a newer, an NFS volume will still attempt the relabel; but as the avoidance of a relabel was only an optimization, this shouldn't cause any problems. In the ideal future, libvirt will eventually have XML describing EVERY file in the backing chain, with each file having a separate <seclabel> element. At that point, libvirt will be able to track more closely which files need a relabel attempt at shutdown. But until we reach that point, the single <seclabel> for the entire <disk> chain is treated as a hint - when a chain has only one file, then we know it is accurate; but if the chain has more than one file, we have to attempt relabel in spite of the attribute, in case part of the chain is local and SELinux mattered for that portion of the chain. * src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new member. * src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML): Parse it, for live images only. (virSecurityDeviceLabelDefFormat): Output it. (virDomainDiskDefParseXML, virDomainChrSourceDefParseXML) (virDomainDiskSourceDefFormat, virDomainChrDefFormat) (virDomainDiskDefFormat): Pass flags on through. * src/security/security_selinux.c (virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip when possible. (virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not norelabel, if labeling fails. (virSecuritySELinuxSetFileconHelper): Fix indentation. * docs/formatdomain.html.in (seclabel): Document new xml. * docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG. * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml: * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args: * tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml: New test files. * tests/qemuxml2argvtest.c (mymain): Run the new tests. * tests/qemuxml2xmltest.c (mymain): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-12 15:15:42 +00:00
unsigned int flags = live ? 0 : VIR_DOMAIN_XML_INACTIVE;
2007-07-18 21:34:22 +00:00
if (virtTestLoadFile(inxml, &inXmlData) < 0)
goto fail;
if (virtTestLoadFile(outxml, &outXmlData) < 0)
2007-07-18 21:34:22 +00:00
goto fail;
if (!(def = virDomainDefParseString(inXmlData, driver.caps, driver.xmlopt,
selinux: distinguish failure to label from request to avoid label https://bugzilla.redhat.com/show_bug.cgi?id=924153 Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with an attribute relabel='no' in order to try and minimize the impact of shutdown delays when an NFS server disappears. The idea was that if a disk is on NFS and can't be labeled in the first place, there is no need to attempt the (no-op) relabel on domain shutdown. Unfortunately, the way this was implemented was by modifying the domain XML so that the optimization would survive libvirtd restart, but in a way that is indistinguishable from an explicit user setting. Furthermore, once the setting is turned on, libvirt avoids attempts at labeling, even for operations like snapshot or blockcopy where the chain is being extended or pivoted onto non-NFS, where SELinux labeling is once again possible. As a result, it was impossible to do a blockcopy to pivot from an NFS image file onto a local file. The solution is to separate the semantics of a chain that must not be labeled (which the user can set even on persistent domains) vs. the optimization of not attempting a relabel on cleanup (a live-only annotation), and using only the user's explicit notation rather than the optimization as the decision on whether to skip a label attempt in the first place. When upgrading an older libvirtd to a newer, an NFS volume will still attempt the relabel; but as the avoidance of a relabel was only an optimization, this shouldn't cause any problems. In the ideal future, libvirt will eventually have XML describing EVERY file in the backing chain, with each file having a separate <seclabel> element. At that point, libvirt will be able to track more closely which files need a relabel attempt at shutdown. But until we reach that point, the single <seclabel> for the entire <disk> chain is treated as a hint - when a chain has only one file, then we know it is accurate; but if the chain has more than one file, we have to attempt relabel in spite of the attribute, in case part of the chain is local and SELinux mattered for that portion of the chain. * src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new member. * src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML): Parse it, for live images only. (virSecurityDeviceLabelDefFormat): Output it. (virDomainDiskDefParseXML, virDomainChrSourceDefParseXML) (virDomainDiskSourceDefFormat, virDomainChrDefFormat) (virDomainDiskDefFormat): Pass flags on through. * src/security/security_selinux.c (virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip when possible. (virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not norelabel, if labeling fails. (virSecuritySELinuxSetFileconHelper): Fix indentation. * docs/formatdomain.html.in (seclabel): Document new xml. * docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG. * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml: * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args: * tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml: New test files. * tests/qemuxml2argvtest.c (mymain): Run the new tests. * tests/qemuxml2xmltest.c (mymain): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-12 15:15:42 +00:00
QEMU_EXPECTED_VIRT_TYPES, flags)))
2007-07-18 21:34:22 +00:00
goto fail;
if (!virDomainDefCheckABIStability(def, def)) {
fprintf(stderr, "ABI stability check failed on %s", inxml);
goto fail;
}
selinux: distinguish failure to label from request to avoid label https://bugzilla.redhat.com/show_bug.cgi?id=924153 Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with an attribute relabel='no' in order to try and minimize the impact of shutdown delays when an NFS server disappears. The idea was that if a disk is on NFS and can't be labeled in the first place, there is no need to attempt the (no-op) relabel on domain shutdown. Unfortunately, the way this was implemented was by modifying the domain XML so that the optimization would survive libvirtd restart, but in a way that is indistinguishable from an explicit user setting. Furthermore, once the setting is turned on, libvirt avoids attempts at labeling, even for operations like snapshot or blockcopy where the chain is being extended or pivoted onto non-NFS, where SELinux labeling is once again possible. As a result, it was impossible to do a blockcopy to pivot from an NFS image file onto a local file. The solution is to separate the semantics of a chain that must not be labeled (which the user can set even on persistent domains) vs. the optimization of not attempting a relabel on cleanup (a live-only annotation), and using only the user's explicit notation rather than the optimization as the decision on whether to skip a label attempt in the first place. When upgrading an older libvirtd to a newer, an NFS volume will still attempt the relabel; but as the avoidance of a relabel was only an optimization, this shouldn't cause any problems. In the ideal future, libvirt will eventually have XML describing EVERY file in the backing chain, with each file having a separate <seclabel> element. At that point, libvirt will be able to track more closely which files need a relabel attempt at shutdown. But until we reach that point, the single <seclabel> for the entire <disk> chain is treated as a hint - when a chain has only one file, then we know it is accurate; but if the chain has more than one file, we have to attempt relabel in spite of the attribute, in case part of the chain is local and SELinux mattered for that portion of the chain. * src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new member. * src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML): Parse it, for live images only. (virSecurityDeviceLabelDefFormat): Output it. (virDomainDiskDefParseXML, virDomainChrSourceDefParseXML) (virDomainDiskSourceDefFormat, virDomainChrDefFormat) (virDomainDiskDefFormat): Pass flags on through. * src/security/security_selinux.c (virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip when possible. (virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not norelabel, if labeling fails. (virSecuritySELinuxSetFileconHelper): Fix indentation. * docs/formatdomain.html.in (seclabel): Document new xml. * docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG. * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml: * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args: * tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml: New test files. * tests/qemuxml2argvtest.c (mymain): Run the new tests. * tests/qemuxml2xmltest.c (mymain): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-12 15:15:42 +00:00
if (!(actual = virDomainDefFormat(def, VIR_DOMAIN_XML_SECURE | flags)))
2007-07-18 21:34:22 +00:00
goto fail;
if (STRNEQ(outXmlData, actual)) {
virtTestDifference(stderr, outXmlData, actual);
2007-07-18 21:34:22 +00:00
goto fail;
}
ret = 0;
fail:
VIR_FREE(inXmlData);
VIR_FREE(outXmlData);
VIR_FREE(actual);
virDomainDefFree(def);
2007-07-18 21:34:22 +00:00
return ret;
}
blockjob: enhance xml to track mirrors across libvirtd restart In order to track a block copy job across libvirtd restarts, we need to save internal XML that tracks the name of the file holding the mirror. Displaying this name in dumpxml might also be useful to the user, even if we don't yet have a way to (re-) start a domain with mirroring enabled up front. This is done with a new <mirror> sub-element to <disk>, as in: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/original.img'/> <mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/> ... </disk> For now, the element is output-only, in live domains; it is ignored when defining a domain or hot-plugging a disk (since those contexts use VIR_DOMAIN_XML_INACTIVE in parsing). The 'ready' attribute appears when libvirt knows that the job has changed from the initial pulling phase over to the mirroring phase, although absence of the attribute is not a sure indicator of the current phase. If we come up with a way to make qemu start with mirroring enabled, we can relax the xml restriction, and allow <mirror> (but not attribute 'ready') on input. Testing active-only XML meant tweaking the testsuite slightly, but it was worth it. * docs/schemas/domaincommon.rng (diskspec): Add diskMirror. * docs/formatdomain.html.in (elementsDisks): Document it. * src/conf/domain_conf.h (_virDomainDiskDef): New members. * src/conf/domain_conf.c (virDomainDiskDefFree): Clean them. (virDomainDiskDefParseXML): Parse them, but only internally. (virDomainDiskDefFormat): Output them. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise. * tests/qemuxml2xmltest.c (testInfo): Alter members. (testCompareXMLToXMLHelper): Allow more test control. (mymain): Run new test.
2012-03-29 00:10:18 +00:00
enum {
WHEN_INACTIVE = 1,
WHEN_ACTIVE = 2,
WHEN_EITHER = 3,
};
struct testInfo {
const char *name;
blockjob: enhance xml to track mirrors across libvirtd restart In order to track a block copy job across libvirtd restarts, we need to save internal XML that tracks the name of the file holding the mirror. Displaying this name in dumpxml might also be useful to the user, even if we don't yet have a way to (re-) start a domain with mirroring enabled up front. This is done with a new <mirror> sub-element to <disk>, as in: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/original.img'/> <mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/> ... </disk> For now, the element is output-only, in live domains; it is ignored when defining a domain or hot-plugging a disk (since those contexts use VIR_DOMAIN_XML_INACTIVE in parsing). The 'ready' attribute appears when libvirt knows that the job has changed from the initial pulling phase over to the mirroring phase, although absence of the attribute is not a sure indicator of the current phase. If we come up with a way to make qemu start with mirroring enabled, we can relax the xml restriction, and allow <mirror> (but not attribute 'ready') on input. Testing active-only XML meant tweaking the testsuite slightly, but it was worth it. * docs/schemas/domaincommon.rng (diskspec): Add diskMirror. * docs/formatdomain.html.in (elementsDisks): Document it. * src/conf/domain_conf.h (_virDomainDiskDef): New members. * src/conf/domain_conf.c (virDomainDiskDefFree): Clean them. (virDomainDiskDefParseXML): Parse them, but only internally. (virDomainDiskDefFormat): Output them. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise. * tests/qemuxml2xmltest.c (testInfo): Alter members. (testCompareXMLToXMLHelper): Allow more test control. (mymain): Run new test.
2012-03-29 00:10:18 +00:00
bool different;
int when;
};
static int
testCompareXMLToXMLHelper(const void *data)
{
const struct testInfo *info = data;
char *xml_in = NULL;
char *xml_out = NULL;
char *xml_out_active = NULL;
char *xml_out_inactive = NULL;
int ret = -1;
if (virAsprintf(&xml_in, "%s/qemuxml2argvdata/qemuxml2argv-%s.xml",
abs_srcdir, info->name) < 0 ||
virAsprintf(&xml_out, "%s/qemuxml2xmloutdata/qemuxml2xmlout-%s.xml",
abs_srcdir, info->name) < 0 ||
virAsprintf(&xml_out_active,
"%s/qemuxml2xmloutdata/qemuxml2xmlout-%s-active.xml",
abs_srcdir, info->name) < 0 ||
virAsprintf(&xml_out_inactive,
"%s/qemuxml2xmloutdata/qemuxml2xmlout-%s-inactive.xml",
abs_srcdir, info->name) < 0)
goto cleanup;
if ((info->when & WHEN_INACTIVE)) {
char *out;
if (!info->different)
out = xml_in;
else if (virFileExists(xml_out_inactive))
out = xml_out_inactive;
else
out = xml_out;
if (testCompareXMLToXMLFiles(xml_in, out, false) < 0)
goto cleanup;
}
if ((info->when & WHEN_ACTIVE)) {
char *out;
if (!info->different)
out = xml_in;
else if (virFileExists(xml_out_active))
out = xml_out_active;
else
out = xml_out;
if (testCompareXMLToXMLFiles(xml_in, out, true) < 0)
goto cleanup;
}
ret = 0;
cleanup:
VIR_FREE(xml_in);
VIR_FREE(xml_out);
VIR_FREE(xml_out_active);
VIR_FREE(xml_out_inactive);
return ret;
2007-07-18 21:34:22 +00:00
}
static int
tests: simplify common setup A few of the tests were missing basic sanity checks, while most of them were doing copy-and-paste initialization (in fact, some of them pasted the argc > 1 check more than once!). It's much nicer to do things in one common place, and minimizes the size of the next patch that fixes getcwd usage. * tests/testutils.h (EXIT_AM_HARDFAIL): New define. (progname, abs_srcdir): Define for all tests. (VIRT_TEST_MAIN): Change callback signature. * tests/testutils.c (virtTestMain): Do more common init. * tests/commandtest.c (mymain): Simplify. * tests/cputest.c (mymain): Likewise. * tests/esxutilstest.c (mymain): Likewise. * tests/eventtest.c (mymain): Likewise. * tests/hashtest.c (mymain): Likewise. * tests/networkxml2xmltest.c (mymain): Likewise. * tests/nodedevxml2xmltest.c (myname): Likewise. * tests/nodeinfotest.c (mymain): Likewise. * tests/nwfilterxml2xmltest.c (mymain): Likewise. * tests/qemuargv2xmltest.c (mymain): Likewise. * tests/qemuhelptest.c (mymain): Likewise. * tests/qemuxml2argvtest.c (mymain): Likewise. * tests/qemuxml2xmltest.c (mymain): Likewise. * tests/qparamtest.c (mymain): Likewise. * tests/sexpr2xmltest.c (mymain): Likewise. * tests/sockettest.c (mymain): Likewise. * tests/statstest.c (mymain): Likewise. * tests/storagepoolxml2xmltest.c (mymain): Likewise. * tests/storagevolxml2xmltest.c (mymain): Likewise. * tests/virbuftest.c (mymain): Likewise. * tests/virshtest.c (mymain): Likewise. * tests/vmx2xmltest.c (mymain): Likewise. * tests/xencapstest.c (mymain): Likewise. * tests/xmconfigtest.c (mymain): Likewise. * tests/xml2sexprtest.c (mymain): Likewise. * tests/xml2vmxtest.c (mymain): Likewise.
2011-04-29 16:21:20 +00:00
mymain(void)
2007-07-18 21:34:22 +00:00
{
int ret = 0;
if ((driver.caps = testQemuCapsInit()) == NULL)
return EXIT_FAILURE;
if (!(driver.xmlopt = virQEMUDriverCreateXMLConf(&driver)))
return EXIT_FAILURE;
blockjob: enhance xml to track mirrors across libvirtd restart In order to track a block copy job across libvirtd restarts, we need to save internal XML that tracks the name of the file holding the mirror. Displaying this name in dumpxml might also be useful to the user, even if we don't yet have a way to (re-) start a domain with mirroring enabled up front. This is done with a new <mirror> sub-element to <disk>, as in: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/original.img'/> <mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/> ... </disk> For now, the element is output-only, in live domains; it is ignored when defining a domain or hot-plugging a disk (since those contexts use VIR_DOMAIN_XML_INACTIVE in parsing). The 'ready' attribute appears when libvirt knows that the job has changed from the initial pulling phase over to the mirroring phase, although absence of the attribute is not a sure indicator of the current phase. If we come up with a way to make qemu start with mirroring enabled, we can relax the xml restriction, and allow <mirror> (but not attribute 'ready') on input. Testing active-only XML meant tweaking the testsuite slightly, but it was worth it. * docs/schemas/domaincommon.rng (diskspec): Add diskMirror. * docs/formatdomain.html.in (elementsDisks): Document it. * src/conf/domain_conf.h (_virDomainDiskDef): New members. * src/conf/domain_conf.c (virDomainDiskDefFree): Clean them. (virDomainDiskDefParseXML): Parse them, but only internally. (virDomainDiskDefFormat): Output them. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise. * tests/qemuxml2xmltest.c (testInfo): Alter members. (testCompareXMLToXMLHelper): Allow more test control. (mymain): Run new test.
2012-03-29 00:10:18 +00:00
# define DO_TEST_FULL(name, is_different, when) \
do { \
blockjob: enhance xml to track mirrors across libvirtd restart In order to track a block copy job across libvirtd restarts, we need to save internal XML that tracks the name of the file holding the mirror. Displaying this name in dumpxml might also be useful to the user, even if we don't yet have a way to (re-) start a domain with mirroring enabled up front. This is done with a new <mirror> sub-element to <disk>, as in: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/original.img'/> <mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/> ... </disk> For now, the element is output-only, in live domains; it is ignored when defining a domain or hot-plugging a disk (since those contexts use VIR_DOMAIN_XML_INACTIVE in parsing). The 'ready' attribute appears when libvirt knows that the job has changed from the initial pulling phase over to the mirroring phase, although absence of the attribute is not a sure indicator of the current phase. If we come up with a way to make qemu start with mirroring enabled, we can relax the xml restriction, and allow <mirror> (but not attribute 'ready') on input. Testing active-only XML meant tweaking the testsuite slightly, but it was worth it. * docs/schemas/domaincommon.rng (diskspec): Add diskMirror. * docs/formatdomain.html.in (elementsDisks): Document it. * src/conf/domain_conf.h (_virDomainDiskDef): New members. * src/conf/domain_conf.c (virDomainDiskDefFree): Clean them. (virDomainDiskDefParseXML): Parse them, but only internally. (virDomainDiskDefFormat): Output them. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise. * tests/qemuxml2xmltest.c (testInfo): Alter members. (testCompareXMLToXMLHelper): Allow more test control. (mymain): Run new test.
2012-03-29 00:10:18 +00:00
const struct testInfo info = {name, is_different, when}; \
if (virtTestRun("QEMU XML-2-XML " name, \
testCompareXMLToXMLHelper, &info) < 0) \
ret = -1; \
} while (0)
# define DO_TEST(name) \
blockjob: enhance xml to track mirrors across libvirtd restart In order to track a block copy job across libvirtd restarts, we need to save internal XML that tracks the name of the file holding the mirror. Displaying this name in dumpxml might also be useful to the user, even if we don't yet have a way to (re-) start a domain with mirroring enabled up front. This is done with a new <mirror> sub-element to <disk>, as in: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/original.img'/> <mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/> ... </disk> For now, the element is output-only, in live domains; it is ignored when defining a domain or hot-plugging a disk (since those contexts use VIR_DOMAIN_XML_INACTIVE in parsing). The 'ready' attribute appears when libvirt knows that the job has changed from the initial pulling phase over to the mirroring phase, although absence of the attribute is not a sure indicator of the current phase. If we come up with a way to make qemu start with mirroring enabled, we can relax the xml restriction, and allow <mirror> (but not attribute 'ready') on input. Testing active-only XML meant tweaking the testsuite slightly, but it was worth it. * docs/schemas/domaincommon.rng (diskspec): Add diskMirror. * docs/formatdomain.html.in (elementsDisks): Document it. * src/conf/domain_conf.h (_virDomainDiskDef): New members. * src/conf/domain_conf.c (virDomainDiskDefFree): Clean them. (virDomainDiskDefParseXML): Parse them, but only internally. (virDomainDiskDefFormat): Output them. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise. * tests/qemuxml2xmltest.c (testInfo): Alter members. (testCompareXMLToXMLHelper): Allow more test control. (mymain): Run new test.
2012-03-29 00:10:18 +00:00
DO_TEST_FULL(name, false, WHEN_EITHER)
# define DO_TEST_DIFFERENT(name) \
blockjob: enhance xml to track mirrors across libvirtd restart In order to track a block copy job across libvirtd restarts, we need to save internal XML that tracks the name of the file holding the mirror. Displaying this name in dumpxml might also be useful to the user, even if we don't yet have a way to (re-) start a domain with mirroring enabled up front. This is done with a new <mirror> sub-element to <disk>, as in: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/original.img'/> <mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/> ... </disk> For now, the element is output-only, in live domains; it is ignored when defining a domain or hot-plugging a disk (since those contexts use VIR_DOMAIN_XML_INACTIVE in parsing). The 'ready' attribute appears when libvirt knows that the job has changed from the initial pulling phase over to the mirroring phase, although absence of the attribute is not a sure indicator of the current phase. If we come up with a way to make qemu start with mirroring enabled, we can relax the xml restriction, and allow <mirror> (but not attribute 'ready') on input. Testing active-only XML meant tweaking the testsuite slightly, but it was worth it. * docs/schemas/domaincommon.rng (diskspec): Add diskMirror. * docs/formatdomain.html.in (elementsDisks): Document it. * src/conf/domain_conf.h (_virDomainDiskDef): New members. * src/conf/domain_conf.c (virDomainDiskDefFree): Clean them. (virDomainDiskDefParseXML): Parse them, but only internally. (virDomainDiskDefFormat): Output them. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise. * tests/qemuxml2xmltest.c (testInfo): Alter members. (testCompareXMLToXMLHelper): Allow more test control. (mymain): Run new test.
2012-03-29 00:10:18 +00:00
DO_TEST_FULL(name, true, WHEN_EITHER)
/* Unset or set all envvars here that are copied in qemudBuildCommandLine
* using ADD_ENV_COPY, otherwise these tests may fail due to unexpected
* values for these envvars */
setenv("PATH", "/bin", 1);
DO_TEST("minimal");
2012-08-15 08:16:36 +00:00
DO_TEST("machine-core-on");
DO_TEST("machine-core-off");
DO_TEST("boot-cdrom");
DO_TEST("boot-network");
DO_TEST("boot-floppy");
DO_TEST("boot-multi");
DO_TEST("boot-menu-enable-with-timeout");
DO_TEST("boot-menu-disable");
DO_TEST_DIFFERENT("boot-menu-disable-with-timeout");
DO_TEST("boot-order");
2008-05-15 16:21:11 +00:00
DO_TEST("bootloader");
2012-09-18 10:32:07 +00:00
DO_TEST("reboot-timeout-enabled");
DO_TEST("reboot-timeout-disabled");
DO_TEST("clock-utc");
DO_TEST("clock-localtime");
DO_TEST("cpu-kvmclock");
DO_TEST("cpu-host-kvmclock");
DO_TEST("clock-catchup");
DO_TEST("kvmclock");
DO_TEST("clock-timer-hyperv-rtc");
DO_TEST("cpu-eoi-disabled");
DO_TEST("cpu-eoi-enabled");
DO_TEST("eoi-disabled");
DO_TEST("eoi-enabled");
DO_TEST("pv-spinlock-disabled");
DO_TEST("pv-spinlock-enabled");
DO_TEST("hyperv");
DO_TEST("hyperv-off");
DO_TEST("kvm-features");
DO_TEST("kvm-features-off");
DO_TEST("hugepages");
DO_TEST("hugepages-pages");
DO_TEST("hugepages-pages2");
DO_TEST("hugepages-pages3");
DO_TEST("hugepages-shared");
DO_TEST("nosharepages");
DO_TEST("disk-aio");
DO_TEST("disk-cdrom");
DO_TEST("disk-floppy");
DO_TEST("disk-many");
DO_TEST("disk-xenvbd");
DO_TEST("disk-usb");
DO_TEST("disk-virtio");
DO_TEST("floppy-drive-fat");
DO_TEST("disk-drive-fat");
DO_TEST("disk-drive-fmt-qcow");
2009-01-30 17:15:39 +00:00
DO_TEST("disk-drive-cache-v1-wt");
DO_TEST("disk-drive-cache-v1-wb");
DO_TEST("disk-drive-cache-v1-none");
DO_TEST("disk-drive-copy-on-read");
DO_TEST("disk-drive-network-nbd");
DO_TEST("disk-drive-network-nbd-export");
DO_TEST("disk-drive-network-nbd-ipv6");
DO_TEST("disk-drive-network-nbd-ipv6-export");
DO_TEST("disk-drive-network-nbd-unix");
DO_TEST("disk-drive-network-iscsi");
DO_TEST("disk-drive-network-iscsi-auth");
DO_TEST("disk-scsi-device");
DO_TEST("disk-scsi-vscsi");
DO_TEST("disk-scsi-virtio-scsi");
DO_TEST("disk-virtio-scsi-num_queues");
DO_TEST("disk-virtio-scsi-cmd_per_lun");
DO_TEST("disk-virtio-scsi-max_sectors");
DO_TEST("disk-scsi-megasas");
conf: alter disk mirror xml output Now that we track a disk mirror as a virStorageSource, we might as well update the XML to theoretically allow any type of mirroring destination (not just a local file). A later patch will also be reusing <mirror> to track the block commit of the top layer of a chain, which is another case where libvirt needs to update the backing chain after the job is finally pivoted, and since backing chains can have network backing files as the destination to commit into, it makes more sense to display that in the XML. This patch changes output-only XML; it was already documented that <mirror> does not affect a domain definition at this point (because qemu doesn't provide persistent bitmaps yet). Any application that was starting a block copy job with older libvirt and then relying on the domain XML to determine if it was complete will no longer be able to access the file= and format= attributes of mirror that were previously used. However, this is not going to be a problem in practice: the only time a block copy job works is on a transient domain, and any app that is managing a transient domain probably already does enough of its own bookkeeping to know which file it is mirroring into without having to re-read it from the libvirt XML. The one thing that was likely to be used in a mirroring job was the ready= attribute, which is unchanged. Meanwhile, I made sure the schema and parser still accept the old format, even if we no longer output it, so that upgrading from an older version of libvirt is seamless. * docs/schemas/domaincommon.rng (diskMirror): Alter definition. * src/conf/domain_conf.c (virDomainDiskDefParseXML): Parse two styles of mirror elements. (virDomainDiskDefFormat): Output new style. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror-old.xml: New file, copied from... * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: ...here before modernizing. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old*: New files. * tests/qemuxml2xmltest.c (mymain): Test both styles. Signed-off-by: Eric Blake <eblake@redhat.com>
2014-05-22 04:39:57 +00:00
DO_TEST_DIFFERENT("disk-mirror-old");
blockjob: enhance xml to track mirrors across libvirtd restart In order to track a block copy job across libvirtd restarts, we need to save internal XML that tracks the name of the file holding the mirror. Displaying this name in dumpxml might also be useful to the user, even if we don't yet have a way to (re-) start a domain with mirroring enabled up front. This is done with a new <mirror> sub-element to <disk>, as in: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/original.img'/> <mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/> ... </disk> For now, the element is output-only, in live domains; it is ignored when defining a domain or hot-plugging a disk (since those contexts use VIR_DOMAIN_XML_INACTIVE in parsing). The 'ready' attribute appears when libvirt knows that the job has changed from the initial pulling phase over to the mirroring phase, although absence of the attribute is not a sure indicator of the current phase. If we come up with a way to make qemu start with mirroring enabled, we can relax the xml restriction, and allow <mirror> (but not attribute 'ready') on input. Testing active-only XML meant tweaking the testsuite slightly, but it was worth it. * docs/schemas/domaincommon.rng (diskspec): Add diskMirror. * docs/formatdomain.html.in (elementsDisks): Document it. * src/conf/domain_conf.h (_virDomainDiskDef): New members. * src/conf/domain_conf.c (virDomainDiskDefFree): Clean them. (virDomainDiskDefParseXML): Parse them, but only internally. (virDomainDiskDefFormat): Output them. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise. * tests/qemuxml2xmltest.c (testInfo): Alter members. (testCompareXMLToXMLHelper): Allow more test control. (mymain): Run new test.
2012-03-29 00:10:18 +00:00
DO_TEST_FULL("disk-mirror", false, WHEN_ACTIVE);
DO_TEST_FULL("disk-mirror", true, WHEN_INACTIVE);
blockcommit: track job type in xml A future patch is going to wire up qemu active block commit jobs; but as they have similar events and are canceled/pivoted in the same way as block copy jobs, it is easiest to track all bookkeeping for the commit job by reusing the <mirror> element. This patch adds domain XML to track which job was responsible for creating a mirroring situation, and adds a job='copy' attribute to all existing uses of <mirror>. Along the way, it also massages the qemu monitor backend to read the new field in order to generate the correct type of libvirt job (even though it requires a future patch to actually cause a qemu event that can be reported as an active commit). It also prepares to update persistent XML to match changes made to live XML when a copy completes. * docs/schemas/domaincommon.rng: Enhance schema. * docs/formatdomain.html.in: Document it. * src/conf/domain_conf.h (_virDomainDiskDef): Add a field. * src/conf/domain_conf.c (virDomainBlockJobType): String conversion. (virDomainDiskDefParseXML): Parse job type. (virDomainDiskDefFormat): Output job type. * src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish active from regular commit. * src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type. (qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type on completion. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml: Update tests. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise. * tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New file. * tests/qemuxml2xmltest.c (mymain): Drive new test. Signed-off-by: Eric Blake <eblake@redhat.com>
2014-07-29 03:46:44 +00:00
DO_TEST_FULL("disk-active-commit", false, WHEN_ACTIVE);
conf: add <listen> subelement to domain <graphics> element Once it's plugged in, the <listen> element will be an optional replacement for the "listen" attribute that graphics elements already have. If the <listen> element is type='address', it will have an attribute called 'address' which will contain an IP address or dns name that the guest's display server should listen on. If, however, type='network', the <listen> element should have an attribute called 'network' that will be set to the name of a network configuration to get the IP address from. * docs/schemas/domain.rng: updated to allow the <listen> element * docs/formatdomain.html.in: document the <listen> element and its attributes. * src/conf/domain_conf.[hc]: 1) The domain parser, formatter, and data structure are modified to support 0 or more <listen> subelements to each <graphics> element. The old style "legacy" listen attribute is also still accepted, and will be stored internally just as if it were a separate <listen> element. On output (i.e. format), the address attribute of the first <listen> element of type 'address' will be duplicated in the legacy "listen" attribute of the <graphic> element. 2) The "listenAddr" attribute has been removed from the unions in virDomainGRaphicsDef for graphics types vnc, rdp, and spice. This attribute is now in the <listen> subelement (aka virDomainGraphicsListenDef) 3) Helper functions were written to provide simple access (both Get and Set) to the listen elements and their attributes. * src/libvirt_private.syms: export the listen helper functions * src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c, src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c, src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c Modify all these files to use the listen helper functions rather than directly referencing the (now missing) listenAddr attribute. There can be multiple <listen> elements to a single <graphics>, but the drivers all currently only support one, so all replacements of direct access with a helper function indicate index "0". * tests/* - only 3 of these are new files added explicitly to test the new <listen> element. All the others have been modified to reflect the fact that any legacy "listen" attributes passed in to the domain parse will be saved in a <listen> element (i.e. one of the virDomainGraphicsListenDefs), and during the domain format function, both the <listen> element as well as the legacy attributes will be output.
2011-07-07 04:20:28 +00:00
DO_TEST("graphics-listen-network");
DO_TEST("graphics-vnc");
DO_TEST("graphics-vnc-websocket");
DO_TEST("graphics-vnc-sasl");
DO_TEST("graphics-vnc-tls");
DO_TEST("graphics-sdl");
DO_TEST("graphics-sdl-fullscreen");
DO_TEST("graphics-spice");
DO_TEST("graphics-spice-compression");
qemu: Support vram for video of qxl type For qemu names the primary vga as "qxl-vga": 1) if vram is specified for 2nd qxl device: -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,vram_size=$SIZE,... 2) if vram is not specified for 2nd qxl device, (use the default set by global): -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,... For qemu names all qxl devices as "qxl": 1) if vram is specified for 2nd qxl device: -vga qxl -global qxl.vram_size=$SIZE \ -device qxl,id=video1,vram_size=$SIZE ... 2) if vram is not specified for 2nd qxl device: -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,... "-global" is the only way to define vram_size for the primary qxl device, regardless of how qemu names it, (It's not good a good way, as original idea of "-global" is to set a global default for a driver property, but to specify vram for first qxl device, we have to use it). For other qxl devices, as they are represented by "-device", could specify it directly and seperately for each, and it overrides the default set by "-global" if specified. v1 - v2: * modify "virDomainVideoDefaultRAM" so that it returns 16M as the default vram_size for qxl device. * vram_size * 1024 (qemu accepts bytes for vram_size). * apply default vram_size for qxl device for which vram_size is not specified. * modify "graphics-spice" tests (more sensiable vram_size) * Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr, to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr). v2 - v3: * Modify default video memory size for qxl device from 16M to 24M * Update codes to be consistent with changes on qemu_capabilities.*
2011-03-06 14:00:27 +00:00
DO_TEST("graphics-spice-qxl-vga");
DO_TEST("input-usbmouse");
DO_TEST("input-usbtablet");
DO_TEST("input-xen");
DO_TEST("misc-acpi");
DO_TEST("misc-disable-s3");
DO_TEST("misc-disable-suspends");
DO_TEST("misc-enable-s4");
DO_TEST("misc-no-reboot");
DO_TEST("net-vhostuser");
DO_TEST("net-user");
DO_TEST("net-virtio");
Add txmode attribute to interface XML for virtio backend This is in response to: https://bugzilla.redhat.com/show_bug.cgi?id=629662 Explanation qemu's virtio-net-pci driver allows setting the algorithm used for tx packets to either "bh" or "timer". This is done by adding ",tx=bh" or ",tx=timer" to the "-device virtio-net-pci" commandline option. 'bh' stands for 'bottom half'; when this is set, packet tx is all done in an iothread in the bottom half of the driver. (In libvirt, this option is called the more descriptive "iothread".) 'timer' means that tx work is done in qemu, and if there is more tx data than can be sent at the present time, a timer is set before qemu moves on to do other things; when the timer fires, another attempt is made to send more data. (libvirt retains the name "timer" for this option.) The resulting difference, according to the qemu developer who added the option is: bh makes tx more asynchronous and reduces latency, but potentially causes more processor bandwidth contention since the cpu doing the tx isn't necessarily the cpu where the guest generated the packets. Solution This patch provides a libvirt domain xml knob to change the option on the qemu commandline, by adding a new attribute "txmode" to the <driver> element that can be placed inside any <interface> element in a domain definition. It's use would be something like this: <interface ...> ... <model type='virtio'/> <driver txmode='iothread'/> ... </interface> I chose to put this setting as an attribute to <driver> rather than as a sub-element to <tune> because it is specific to the virtio-net driver, not something that is generally usable by all network drivers. (note that this is the same placement as the "driver name=..." attribute used to choose kernel vs. userland backend for the virtio-net driver.) Actually adding the tx=xxx option to the qemu commandline is only done if the version of qemu being used advertises it in the output of qemu -device virtio-net-pci,? If a particular txmode is requested in the XML, and the option isn't listed in that help output, an UNSUPPORTED_CONFIG error is logged, and the domain fails to start.
2011-02-03 20:20:01 +00:00
DO_TEST("net-virtio-device");
DO_TEST("net-virtio-disable-offloads");
DO_TEST("net-eth");
DO_TEST("net-eth-ifname");
DO_TEST("net-virtio-network-portgroup");
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
DO_TEST("net-hostdev");
DO_TEST("net-hostdev-vfio");
conf: add <vlan> element to network and domain interface elements The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
2012-08-12 07:51:30 +00:00
DO_TEST("net-openvswitch");
DO_TEST("sound");
DO_TEST("sound-device");
DO_TEST("net-bandwidth");
DO_TEST("serial-vc");
DO_TEST("serial-pty");
DO_TEST("serial-dev");
DO_TEST("serial-file");
DO_TEST("serial-unix");
DO_TEST("serial-tcp");
DO_TEST("serial-udp");
DO_TEST("serial-tcp-telnet");
DO_TEST("serial-many");
DO_TEST("serial-spiceport");
DO_TEST("serial-spiceport-nospice");
DO_TEST("parallel-tcp");
DO_TEST("console-compat");
DO_TEST("console-virtio-many");
DO_TEST("channel-guestfwd");
DO_TEST("channel-virtio");
2007-07-18 21:34:22 +00:00
DO_TEST("hostdev-usb-address");
DO_TEST("hostdev-pci-address");
DO_TEST("hostdev-vfio");
DO_TEST("pci-rom");
DO_TEST("encrypted-disk");
DO_TEST_DIFFERENT("memtune");
DO_TEST_DIFFERENT("memtune-unlimited");
DO_TEST("blkiotune");
DO_TEST("blkiotune-device");
DO_TEST("cputune");
DO_TEST("cputune-zero-shares");
DO_TEST("smp");
DO_TEST("iothreads");
DO_TEST_DIFFERENT("cputune-iothreads");
DO_TEST("iothreads-disk");
DO_TEST("lease");
qemu: support event_idx parameter for virtio disk and net devices In some versions of qemu, both virtio-blk-pci and virtio-net-pci devices can have an event_idx setting that determines some details of event processing. When it is enabled, it "reduces the number of interrupts and exits for the guest". qemu will automatically enable this feature when it is available, but there may be cases where this new feature could actually make performance worse (NB: no such case has been found so far). As a safety switch in case such a situation is encountered in the field, this patch adds a new attribute "event_idx" to the <driver> element of both disk and interface devices. event_idx can be set to "on" (to force event_idx on in case qemu has it disabled by default) or "off" (for force event_idx off). In the case that event_idx support isn't present in qemu, the attribute is ignored (this on the advice of the qemu developer). docs/formatdomain.html.in: document the new flag (marking it as "don't mess with this!" docs/schemas/domain.rng: add event_idx in appropriate places src/conf/domain_conf.[ch]: add event_idx to parser and formatter src/libvirt_private.syms: export virDomainVirtioEventIdx(From|To)String src/qemu/qemu_capabilities.[ch]: detect and report event_idx in disk/net src/qemu/qemu_command.c: add event_idx parameter to qemu commandline when appropriate. tests/qemuxml2argvdata/qemuxml2argv-event_idx.args, tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml, tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: test cases for event_idx.
2011-08-13 06:32:45 +00:00
DO_TEST("event_idx");
DO_TEST("vhost_queues");
DO_TEST("interface-driver");
qemu: add new disk device='lun' for bus='virtio' & type='block' In the past, generic SCSI commands issued from a guest to a virtio disk were always passed through to the underlying disk by qemu, and the kernel would also pass them on. As a result of CVE-2011-4127 (see: http://seclists.org/oss-sec/2011/q4/536), qemu now honors its scsi=on|off device option for virtio-blk-pci (which enables/disables passthrough of generic SCSI commands), and the kernel will only allow the commands for physical devices (not for partitions or logical volumes). The default behavior of qemu is still to allow sending generic SCSI commands to physical disks that are presented to a guest as virtio-blk-pci devices, but libvirt prefers to disable those commands in the standard virtio block devices, enabling it only when specifically requested (hopefully indicating that the requester understands what they're asking for). For this purpose, a new libvirt disk device type (device='lun') has been created. device='lun' is identical to the default device='disk', except that: 1) It is only allowed if bus='virtio', type='block', and the qemu version is "new enough" to support it ("new enough" == qemu 0.11 or better), otherwise the domain will fail to start and a CONFIG_UNSUPPORTED error will be logged). 2) The option "scsi=on" will be added to the -device arg to allow SG_IO commands (if device !='lun', "scsi=off" will be added to the -device arg so that SG_IO commands are specifically forbidden). Guests which continue to use disk device='disk' (the default) will no longer be able to use SG_IO commands on the disk; those that have their disk device changed to device='lun' will still be able to use SG_IO commands. *docs/formatdomain.html.in - document the new device attribute value. *docs/schemas/domaincommon.rng - allow it in the RNG *tests/* - update the args of several existing tests to add scsi=off, and add one new test that will test scsi=on. *src/conf/domain_conf.c - update domain XML parser and formatter *src/qemu/qemu_(command|driver|hotplug).c - treat VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above. Note that no support for this new device value was added to any hypervisor drivers other than qemu, because it's unclear what it might mean (if anything) to those drivers.
2012-01-05 03:48:38 +00:00
DO_TEST("virtio-lun");
DO_TEST("usb-redir");
DO_TEST("blkdeviotune");
blockjob: enhance xml to track mirrors across libvirtd restart In order to track a block copy job across libvirtd restarts, we need to save internal XML that tracks the name of the file holding the mirror. Displaying this name in dumpxml might also be useful to the user, even if we don't yet have a way to (re-) start a domain with mirroring enabled up front. This is done with a new <mirror> sub-element to <disk>, as in: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/original.img'/> <mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/> ... </disk> For now, the element is output-only, in live domains; it is ignored when defining a domain or hot-plugging a disk (since those contexts use VIR_DOMAIN_XML_INACTIVE in parsing). The 'ready' attribute appears when libvirt knows that the job has changed from the initial pulling phase over to the mirroring phase, although absence of the attribute is not a sure indicator of the current phase. If we come up with a way to make qemu start with mirroring enabled, we can relax the xml restriction, and allow <mirror> (but not attribute 'ready') on input. Testing active-only XML meant tweaking the testsuite slightly, but it was worth it. * docs/schemas/domaincommon.rng (diskspec): Add diskMirror. * docs/formatdomain.html.in (elementsDisks): Document it. * src/conf/domain_conf.h (_virDomainDiskDef): New members. * src/conf/domain_conf.c (virDomainDiskDefFree): Clean them. (virDomainDiskDefParseXML): Parse them, but only internally. (virDomainDiskDefFormat): Output them. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise. * tests/qemuxml2xmltest.c (testInfo): Alter members. (testCompareXMLToXMLHelper): Allow more test control. (mymain): Run new test.
2012-03-29 00:10:18 +00:00
DO_TEST_FULL("seclabel-dynamic-baselabel", false, WHEN_INACTIVE);
DO_TEST_FULL("seclabel-dynamic-override", false, WHEN_INACTIVE);
selinux: distinguish failure to label from request to avoid label https://bugzilla.redhat.com/show_bug.cgi?id=924153 Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with an attribute relabel='no' in order to try and minimize the impact of shutdown delays when an NFS server disappears. The idea was that if a disk is on NFS and can't be labeled in the first place, there is no need to attempt the (no-op) relabel on domain shutdown. Unfortunately, the way this was implemented was by modifying the domain XML so that the optimization would survive libvirtd restart, but in a way that is indistinguishable from an explicit user setting. Furthermore, once the setting is turned on, libvirt avoids attempts at labeling, even for operations like snapshot or blockcopy where the chain is being extended or pivoted onto non-NFS, where SELinux labeling is once again possible. As a result, it was impossible to do a blockcopy to pivot from an NFS image file onto a local file. The solution is to separate the semantics of a chain that must not be labeled (which the user can set even on persistent domains) vs. the optimization of not attempting a relabel on cleanup (a live-only annotation), and using only the user's explicit notation rather than the optimization as the decision on whether to skip a label attempt in the first place. When upgrading an older libvirtd to a newer, an NFS volume will still attempt the relabel; but as the avoidance of a relabel was only an optimization, this shouldn't cause any problems. In the ideal future, libvirt will eventually have XML describing EVERY file in the backing chain, with each file having a separate <seclabel> element. At that point, libvirt will be able to track more closely which files need a relabel attempt at shutdown. But until we reach that point, the single <seclabel> for the entire <disk> chain is treated as a hint - when a chain has only one file, then we know it is accurate; but if the chain has more than one file, we have to attempt relabel in spite of the attribute, in case part of the chain is local and SELinux mattered for that portion of the chain. * src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new member. * src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML): Parse it, for live images only. (virSecurityDeviceLabelDefFormat): Output it. (virDomainDiskDefParseXML, virDomainChrSourceDefParseXML) (virDomainDiskSourceDefFormat, virDomainChrDefFormat) (virDomainDiskDefFormat): Pass flags on through. * src/security/security_selinux.c (virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip when possible. (virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not norelabel, if labeling fails. (virSecuritySELinuxSetFileconHelper): Fix indentation. * docs/formatdomain.html.in (seclabel): Document new xml. * docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG. * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml: * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args: * tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml: New test files. * tests/qemuxml2argvtest.c (mymain): Run the new tests. * tests/qemuxml2xmltest.c (mymain): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-12 15:15:42 +00:00
DO_TEST_FULL("seclabel-dynamic-labelskip", true, WHEN_INACTIVE);
DO_TEST_FULL("seclabel-dynamic-relabel", true, WHEN_INACTIVE);
DO_TEST("seclabel-static");
selinux: distinguish failure to label from request to avoid label https://bugzilla.redhat.com/show_bug.cgi?id=924153 Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with an attribute relabel='no' in order to try and minimize the impact of shutdown delays when an NFS server disappears. The idea was that if a disk is on NFS and can't be labeled in the first place, there is no need to attempt the (no-op) relabel on domain shutdown. Unfortunately, the way this was implemented was by modifying the domain XML so that the optimization would survive libvirtd restart, but in a way that is indistinguishable from an explicit user setting. Furthermore, once the setting is turned on, libvirt avoids attempts at labeling, even for operations like snapshot or blockcopy where the chain is being extended or pivoted onto non-NFS, where SELinux labeling is once again possible. As a result, it was impossible to do a blockcopy to pivot from an NFS image file onto a local file. The solution is to separate the semantics of a chain that must not be labeled (which the user can set even on persistent domains) vs. the optimization of not attempting a relabel on cleanup (a live-only annotation), and using only the user's explicit notation rather than the optimization as the decision on whether to skip a label attempt in the first place. When upgrading an older libvirtd to a newer, an NFS volume will still attempt the relabel; but as the avoidance of a relabel was only an optimization, this shouldn't cause any problems. In the ideal future, libvirt will eventually have XML describing EVERY file in the backing chain, with each file having a separate <seclabel> element. At that point, libvirt will be able to track more closely which files need a relabel attempt at shutdown. But until we reach that point, the single <seclabel> for the entire <disk> chain is treated as a hint - when a chain has only one file, then we know it is accurate; but if the chain has more than one file, we have to attempt relabel in spite of the attribute, in case part of the chain is local and SELinux mattered for that portion of the chain. * src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new member. * src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML): Parse it, for live images only. (virSecurityDeviceLabelDefFormat): Output it. (virDomainDiskDefParseXML, virDomainChrSourceDefParseXML) (virDomainDiskSourceDefFormat, virDomainChrDefFormat) (virDomainDiskDefFormat): Pass flags on through. * src/security/security_selinux.c (virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip when possible. (virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not norelabel, if labeling fails. (virSecuritySELinuxSetFileconHelper): Fix indentation. * docs/formatdomain.html.in (seclabel): Document new xml. * docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG. * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml: * tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args: * tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml: New test files. * tests/qemuxml2argvtest.c (mymain): Run the new tests. * tests/qemuxml2xmltest.c (mymain): Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-12 15:15:42 +00:00
DO_TEST_FULL("seclabel-static-labelskip", false, WHEN_ACTIVE);
DO_TEST_DIFFERENT("seclabel-none");
DO_TEST("seclabel-dac-none");
DO_TEST("seclabel-dynamic-none");
DO_TEST_FULL("seclabel-dynamic-none-relabel", true, WHEN_INACTIVE);
numad: Set memory policy from numad advisory nodeset Though numad will manage the memory allocation of task dynamically, it wants management application (libvirt) to pre-set the memory policy according to the advisory nodeset returned from querying numad, (just like pre-bind CPU nodeset for domain process), and thus the performance could benefit much more from it. This patch introduces new XML tag 'placement', value 'auto' indicates whether to set the memory policy with the advisory nodeset from numad, and its value defaults to the value of <vcpu> placement, or 'static' if 'nodeset' is specified. Example of the new XML tag's usage: <numatune> <memory placement='auto' mode='interleave'/> </numatune> Just like what current "numatune" does, the 'auto' numa memory policy setting uses libnuma's API too. If <vcpu> "placement" is "auto", and <numatune> is not specified explicitly, a default <numatume> will be added with "placement" set as "auto", and "mode" set as "strict". The following XML can now fully drive numad: 1) <vcpu> placement is 'auto', no <numatune> is specified. <vcpu placement='auto'>10</vcpu> 2) <vcpu> placement is 'auto', no 'placement' is specified for <numatune>. <vcpu placement='auto'>10</vcpu> <numatune> <memory mode='interleave'/> </numatune> And it's also able to control the CPU placement and memory policy independently. e.g. 1) <vcpu> placement is 'auto', and <numatune> placement is 'static' <vcpu placement='auto'>10</vcpu> <numatune> <memory mode='strict' nodeset='0-10,^7'/> </numatune> 2) <vcpu> placement is 'static', and <numatune> placement is 'auto' <vcpu placement='static' cpuset='0-24,^12'>10</vcpu> <numatune> <memory mode='interleave' placement='auto'/> </numatume> A follow up patch will change the XML formatting codes to always output 'placement' for <vcpu>, even it's 'static'.
2012-05-08 16:04:34 +00:00
DO_TEST("numad-static-vcpu-no-numatune");
DO_TEST("disk-scsi-lun-passthrough-sgio");
DO_TEST("disk-scsi-disk-vpd");
DO_TEST_DIFFERENT("disk-source-pool");
DO_TEST("disk-source-pool-mode");
DO_TEST_DIFFERENT("disk-drive-discard");
DO_TEST("virtio-rng-random");
DO_TEST("virtio-rng-egd");
DO_TEST("pseries-nvram");
/* These tests generate different XML */
DO_TEST_DIFFERENT("balloon-device-auto");
DO_TEST_DIFFERENT("channel-virtio-auto");
DO_TEST_DIFFERENT("console-compat-auto");
DO_TEST_DIFFERENT("disk-scsi-device-auto");
DO_TEST_DIFFERENT("console-virtio");
DO_TEST_DIFFERENT("serial-target-port-auto");
conf: add <listen> subelement to domain <graphics> element Once it's plugged in, the <listen> element will be an optional replacement for the "listen" attribute that graphics elements already have. If the <listen> element is type='address', it will have an attribute called 'address' which will contain an IP address or dns name that the guest's display server should listen on. If, however, type='network', the <listen> element should have an attribute called 'network' that will be set to the name of a network configuration to get the IP address from. * docs/schemas/domain.rng: updated to allow the <listen> element * docs/formatdomain.html.in: document the <listen> element and its attributes. * src/conf/domain_conf.[hc]: 1) The domain parser, formatter, and data structure are modified to support 0 or more <listen> subelements to each <graphics> element. The old style "legacy" listen attribute is also still accepted, and will be stored internally just as if it were a separate <listen> element. On output (i.e. format), the address attribute of the first <listen> element of type 'address' will be duplicated in the legacy "listen" attribute of the <graphic> element. 2) The "listenAddr" attribute has been removed from the unions in virDomainGRaphicsDef for graphics types vnc, rdp, and spice. This attribute is now in the <listen> subelement (aka virDomainGraphicsListenDef) 3) Helper functions were written to provide simple access (both Get and Set) to the listen elements and their attributes. * src/libvirt_private.syms: export the listen helper functions * src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c, src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c, src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c Modify all these files to use the listen helper functions rather than directly referencing the (now missing) listenAddr attribute. There can be multiple <listen> elements to a single <graphics>, but the drivers all currently only support one, so all replacements of direct access with a helper function indicate index "0". * tests/* - only 3 of these are new files added explicitly to test the new <listen> element. All the others have been modified to reflect the fact that any legacy "listen" attributes passed in to the domain parse will be saved in a <listen> element (i.e. one of the virDomainGraphicsListenDefs), and during the domain format function, both the <listen> element as well as the legacy attributes will be output.
2011-07-07 04:20:28 +00:00
DO_TEST_DIFFERENT("graphics-listen-network2");
DO_TEST_DIFFERENT("graphics-spice-timeout");
numad: Set memory policy from numad advisory nodeset Though numad will manage the memory allocation of task dynamically, it wants management application (libvirt) to pre-set the memory policy according to the advisory nodeset returned from querying numad, (just like pre-bind CPU nodeset for domain process), and thus the performance could benefit much more from it. This patch introduces new XML tag 'placement', value 'auto' indicates whether to set the memory policy with the advisory nodeset from numad, and its value defaults to the value of <vcpu> placement, or 'static' if 'nodeset' is specified. Example of the new XML tag's usage: <numatune> <memory placement='auto' mode='interleave'/> </numatune> Just like what current "numatune" does, the 'auto' numa memory policy setting uses libnuma's API too. If <vcpu> "placement" is "auto", and <numatune> is not specified explicitly, a default <numatume> will be added with "placement" set as "auto", and "mode" set as "strict". The following XML can now fully drive numad: 1) <vcpu> placement is 'auto', no <numatune> is specified. <vcpu placement='auto'>10</vcpu> 2) <vcpu> placement is 'auto', no 'placement' is specified for <numatune>. <vcpu placement='auto'>10</vcpu> <numatune> <memory mode='interleave'/> </numatune> And it's also able to control the CPU placement and memory policy independently. e.g. 1) <vcpu> placement is 'auto', and <numatune> placement is 'static' <vcpu placement='auto'>10</vcpu> <numatune> <memory mode='strict' nodeset='0-10,^7'/> </numatune> 2) <vcpu> placement is 'static', and <numatune> placement is 'auto' <vcpu placement='static' cpuset='0-24,^12'>10</vcpu> <numatune> <memory mode='interleave' placement='auto'/> </numatume> A follow up patch will change the XML formatting codes to always output 'placement' for <vcpu>, even it's 'static'.
2012-05-08 16:04:34 +00:00
DO_TEST_DIFFERENT("numad-auto-vcpu-no-numatune");
DO_TEST_DIFFERENT("numad-auto-memory-vcpu-no-cpuset-and-placement");
DO_TEST_DIFFERENT("numad-auto-memory-vcpu-cpuset");
DO_TEST_DIFFERENT("usb-ich9-ehci-addr");
DO_TEST_DIFFERENT("metadata");
DO_TEST("tpm-passthrough");
DO_TEST("pci-bridge");
qemu: set/validate slot/connection type when assigning slots for PCI devices Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports all share the same namespace, they are all defined as controllers of type='pci' in libvirt (but with a differing model attribute). Each of these controllers has a certain connection type upstream, allows certain connection types downstream, and each can either allow a single downstream connection at slot 0, or connections from slot 1 - 31. Right now, we only support the pci-root and pci-bridge devices, both of which only allow PCI devices to connect, and both which have usable slots 1 - 31. In preparation for adding other types of controllers that have different capabilities, this patch 1) adds info to the qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets those capabilities appropriately for pci-root and pci-bridge devices, and 3) validates that the controller being connected to is the proper type when allocating slots or validating that a user-selected slot is appropriate for a device.. Having this infrastructure in place will make it much easier to add support for the other PCI controller types. While it would be possible to do all the necessary checking by just storing the controller model in the qemyuDomainPCIAddressBus, it greatly simplifies all the validation code to also keep a "flags", "minSlot" and "maxSlot" for each - that way we can just check those attributes rather than requiring a nearly identical switch statement everywhere we need to validate compatibility. You may notice many places where the flags are seemingly hard-coded to QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI This is currently the correct value for all PCI devices, and in the future will be the default, with small bits of code added to change to the flags for the few devices which are the exceptions to this rule. Finally, there are a few places with "FIXME" comments. Note that these aren't indicating places that are broken according to the currently supported devices, they are places that will need fixing when support for new PCI controller models is added. To assure that there was no regression in the auto-allocation of PCI addresses or auto-creation of integrated pci-root, ide, and usb controllers, a new test case (pci-bridge-many-disks) has been added to both the qemuxml2argv and qemuxml2xml tests. This new test defines a domain with several dozen virtio disks but no pci-root or pci-bridges. The .args file of the new test case was created using libvirt sources from before this patch, and the test still passes after this patch has been applied.
2013-07-15 00:09:44 +00:00
DO_TEST_DIFFERENT("pci-bridge-many-disks");
DO_TEST_DIFFERENT("pci-autoadd-addr");
DO_TEST_DIFFERENT("pci-autoadd-idx");
qemu: add dmi-to-pci-bridge controller This PCI controller, named "dmi-to-pci-bridge" in the libvirt config, and implemented with qemu's "i82801b11-bridge" device, connects to a PCI Express slot (e.g. one of the slots provided by the pcie-root controller, aka "pcie.0" on the qemu commandline), and provides 31 *non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31. Any time a machine is defined which has a pcie-root controller (i.e. any q35-based machinetype), libvirt will automatically add a dmi-to-pci-bridge controller if one doesn't exist, and also add a pci-bridge controller. The reasoning here is that any useful domain will have either an immediate (startup time) or eventual (subsequent hot-plug) need for a standard PCI slot; since the pcie-root controller only provides PCIe slots, we need to connect a dmi-to-pci-bridge controller to it in order to get a non-hot-plug PCI slot that we can then use to connect a pci-bridge - the slots provided by the pci-bridge will be both standard PCI and hot-pluggable. Since pci-bridge devices themselves can not be hot-plugged into a running system (although you can hot-plug other devices into a pci-bridge's slots), any new pci-bridge controller that is added can (and will) be plugged into the dmi-to-pci-bridge as long as it has empty slots available. This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST" to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit the automatically added dmi-to-pci-bridge and pci-bridge devices, and the "after" xml can include it - this way we are testing if libvirt is properly adding these devices.
2013-07-31 01:37:32 +00:00
DO_TEST_DIFFERENT("pcie-root");
qemu: fix handling of default/implicit devices for q35 This patch adds in special handling for a few devices that need to be treated differently for q35 domains: usb - there is no implicit/default usb controller for the q35 machinetype. This is done because normally the default usb controller is added to a domain by just adding "-usb" to the qemu commandline, and it's assumed that this will add a single piix3 usb1 controller at slot 1 function 2. That's not what happens when the machinetype is q35, though. Instead, adding -usb to the commandline adds 3 usb (version 2) controllers to the domain at slot 0x1D.{1,2,7}. Rather than having <controller type='usb' index='0'/> translate into 3 separate devices on the PCI bus, it's cleaner to not automatically add a default usb device; one can always be added explicitly if desired. Or we may decide that on q35 machines, 3 usb controllers will be automatically added when none is given. But for this initial commit, at least we aren't locking ourselves into something we later won't want. video - qemu always initializes the primary video device immediately after any integrated devices for the machinetype. Unless instructed otherwise (by using "-device vga..." instead of "-vga" which libvirt uses in many cases to work around deficiencies and bugs in various qemu versions) qemu will always pick the first unused slot. In the case of the "pc" machinetype and its derivatives, this is always slot 2, but on q35 machinetypes, the first free slot is slot 1 (since the q35's integrated peripheral devices are placed in other slots, e.g. slot 0x1f). In order to make the PCI address of the video device predictable, that slot (1 or 2, depending on machinetype) is reserved even when no video device has been specified. sata - a q35 machine always has a sata controller implicitly added at slot 0x1F, function 2. There is no way to avoid this controller, so we always add it. Note that the xml2xml tests for the pcie-root and q35 cases were changed to use DO_TEST_DIFFERENT() so that we can check for the sata controller being automatically added. This is especially important because we can't check for it in the xml2argv output (it has no effect on that output since it's an implicit device). ide - q35 has no ide controllers. isa and smbus controllers - these two are always present in a q35 (at slot 0x1F functions 0 and 3) but we have no way of modelling them in our config. We do need to reserve those functions so that the user doesn't attempt to put anything else there though. (note that the "pc" machine type also has an ISA controller, which we also ignore).
2013-08-02 08:55:55 +00:00
DO_TEST_DIFFERENT("q35");
qemu: Build qemu command line for scsi host device Except the scsi host device's controller is "lsilogic", mapping between the libvirt attributes and scsi-generic properties is: libvirt qemu ----------------------------------------- controller bus ($libvirt_controller.0) bus channel target scsi-id unit lun For scsi host device with "lsilogic" controller, the mapping is: ('target (libvirt)' must be 0, as it's not used; 'unit (libvirt) must <= 7). libvirt qemu ---------------------------------------------------------- controller && bus bus ($libvirt_controller.$libvirt_bus) unit scsi-id It's not good to hardcode/hard-check limits of these attributes, and even worse, these limits are not documented, one has to find out by either testing or reading the qemu code, I'm looking forward to qemu expose limits like these one day). For example, exposing "max_target", "max_lun" for megasas: static const struct SCSIBusInfo megasas_scsi_info = { .tcq = true, .max_target = MFI_MAX_LD, .max_lun = 255, .transfer_data = megasas_xfer_complete, .get_sg_list = megasas_get_sg_list, .complete = megasas_command_complete, .cancel = megasas_command_cancel, }; Example of the qemu command line (lsilogic controller): -drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \ -device scsi-generic,bus=scsi0.0,scsi-id=8,\ drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0 Example of the qemu command line (virtio-scsi controller): -drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \ -device scsi-generic,bus=scsi0.0,channel=0,scsi-id=128,lun=128,\ drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0 Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com> Signed-off-by: Osier Yang <jyang@redhat.com>
2013-05-03 18:07:23 +00:00
DO_TEST("hostdev-scsi-lsi");
DO_TEST("hostdev-scsi-virtio-scsi");
DO_TEST("hostdev-scsi-readonly");
DO_TEST("disk-copy_on_read");
DO_TEST("hostdev-scsi-shareable");
DO_TEST("hostdev-scsi-sgio");
DO_TEST("hostdev-scsi-rawio");
DO_TEST_DIFFERENT("hostdev-scsi-autogen-address");
DO_TEST("hostdev-scsi-lsi-iscsi");
DO_TEST("hostdev-scsi-lsi-iscsi-auth");
DO_TEST("hostdev-scsi-virtio-iscsi");
DO_TEST("hostdev-scsi-virtio-iscsi-auth");
DO_TEST_DIFFERENT("s390-defaultconsole");
DO_TEST("pcihole64");
DO_TEST_DIFFERENT("pcihole64-gib");
DO_TEST("pcihole64-none");
DO_TEST("pcihole64-q35");
DO_TEST("panic");
DO_TEST_DIFFERENT("disk-backing-chains");
DO_TEST("chardev-label");
DO_TEST_DIFFERENT("cpu-numa1");
DO_TEST_DIFFERENT("cpu-numa2");
DO_TEST("cpu-numa-disjoint");
DO_TEST("cpu-numa-memshared");
DO_TEST_DIFFERENT("numatune-auto-prefer");
DO_TEST_DIFFERENT("numatune-memnode");
DO_TEST("numatune-memnode-no-memory");
DO_TEST("bios-nvram");
DO_TEST("tap-vhost");
virObjectUnref(driver.caps);
virObjectUnref(driver.xmlopt);
2007-07-18 21:34:22 +00:00
return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE;
2007-07-18 21:34:22 +00:00
}
VIRT_TEST_MAIN(mymain)
#else
int
main(void)
{
return EXIT_AM_SKIP;
}
#endif /* WITH_QEMU */