External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-22 05:35:25 +00:00
Code Issues Packages Projects Releases Wiki Activity
f7c33eeeb7
libvirt/tests/qemuxmlconfdata/virtio-non-transitional.x86_64-latest.xml

118 lines
5.2 KiB
XML
Raw Normal View History

conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
<domain type='qemu'>
<name>QEMUGuest1</name>
<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
<memory unit='KiB'>219136</memory>
<currentMemory unit='KiB'>219136</currentMemory>
<vcpu placement='static'>1</vcpu>
<os>
<type arch='x86_64' machine='q35'>hvm</type>
<boot dev='hd'/>
</os>
qemu: capabilities: Replace aliased machine type by copy of the canonical machine The previous approac of just purging the alias combined with the fact that we filled in fake machine types in the test data meant that if a test case used an alias machine type such as 'pc' or 'q35' it would not properly resolve to the actual data returned by qemu. This started to be a problem since the CPU driver now looks at the default CPU reported with the machine type. This patch replaces the original approach of just removing the alias by replacing it with a copy of the machine type data which the type would alias to. This means that we are using the real data while we don't modify the test output after every qemu upgrade. Additionally this change will allow us to drop adding the fake machine types later. The test fallout is from actually excercising the CPU driver with actual data. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-01-23 12:20:25 +00:00
<cpu mode='custom' match='exact' check='none'>
<model fallback='forbid'>qemu64</model>
</cpu>
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<disk type='block' device='disk' model='virtio-non-transitional'>
<driver name='qemu' type='raw'/>
<source dev='/dev/HostVG/QEMUGuest1'/>
<target dev='vda' bus='virtio'/>
qemu: Support scsi controller model=virtio-{non-}transitional Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:43 +00:00
<address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/>
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
</disk>
qemu: Support virtio-serial controller model=virtio-{non-}transitional Add controller type='virtio-serial' model handling for virtio transitional devices. Ex: <controller type='virtio-serial' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-serial-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-serial-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:44 +00:00
<controller type='virtio-serial' index='0' model='virtio-non-transitional'>
<address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
</controller>
qemu: Support scsi controller model=virtio-{non-}transitional Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:43 +00:00
<controller type='scsi' index='0' model='virtio-non-transitional'>
<address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/>
</controller>
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
<controller type='usb' index='0' model='none'/>
<controller type='sata' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pcie-root'/>
<controller type='pci' index='1' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='1' port='0x8'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/>
</controller>
<controller type='pci' index='2' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='2' port='0x9'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
qemu: Support interface model=virtio-{non-}transitional Add new <interface> model handling for virtio transitional devices. Ex: <interface> <model type='virtio-transitional'/> </interface> * "virtio-transitional" maps to qemu "virtio-net-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-net-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:32 +00:00
<controller type='pci' index='3' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='3' port='0xa'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
</controller>
conf: Add <hostdev model='virtio-{non-}transitional'/> qemu vhost-scsi devices map to XML roughly like: <hostdev mode='subsystem' type='scsi_host'> <source protocol='vhost' wwpn=X/> </hostdev> To support vhost-scsi-pci-{non-}traditional in qemu, we need to to extend the SCSI Host hostdev XML to handle model= value. This matches the XML model= format used for mediated devices. This is just the domain_conf bits and some XML test cases. Use of virtio-X naming here does not match the hostdev protocol=vhost nor does it match the qemu vhost-X device naming, however it's more consistent with all other model= names in this area, and also matches the inconsistency of <vsock> devices which use model=virtio but map to vhost-vsock on the qemu commandline Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:33 +00:00
<controller type='pci' index='4' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='4' port='0xb'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x3'/>
</controller>
qemu: Support rng model=virtio-{non-}transitional Add new <rng> model values for virtio transitional devices. Ex: <rng model='virtio-transitional'> ... </rng> * "virtio-transitional" maps to qemu "virtio-rng-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-rng-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:35 +00:00
<controller type='pci' index='5' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='5' port='0xc'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x4'/>
</controller>
conf: Add <filesystem model='virtio-{non-}transitional'/> <filesystem> devices lack the model= attribute which is used by most other device types. To eventually support virtio-9p-pci-{non-}traditional in qemu, let's add a standard model= attribute. The accepted values are: - virtio - virtio-transitional - virtio-non-transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:36 +00:00
<controller type='pci' index='6' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='6' port='0xd'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x5'/>
</controller>
qemu: Support memballoon model=virtio-{non-}transitional Add new <memballoon> model values for virtio transitional devices. Ex: <memballoon model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-balloon-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-balloon-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:39 +00:00
<controller type='pci' index='7' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='7' port='0xe'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x6'/>
</controller>
qemu: Support vsock model=virtio-{non-}transitional Add <vsock> model handling for virtio transitional devices. Ex: <vsock model='virtio-transitional'> ... </vsock> * "virtio-transitional" maps to qemu "vhost-vsock-pci-transitional" * "virtio-non-transitional" maps to qemu "vhost-vsock-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:40 +00:00
<controller type='pci' index='8' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='8' port='0xf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x7'/>
</controller>
conf: Add <input model='virtio-{non-}transitional'/> <input> devices lack the model= attribute which is used by most other device types. To eventually support virtio-input-host-pci-{non-}traditional in qemu, let's add a standard model= attribute. This just adds the domain_conf wiring Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:41 +00:00
<controller type='pci' index='9' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='9' port='0x10'/>
qemu: Support virtio-serial controller model=virtio-{non-}transitional Add controller type='virtio-serial' model handling for virtio transitional devices. Ex: <controller type='virtio-serial' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-serial-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-serial-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:44 +00:00
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/>
</controller>
<controller type='pci' index='10' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='10' port='0x11'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
conf: Add <input model='virtio-{non-}transitional'/> <input> devices lack the model= attribute which is used by most other device types. To eventually support virtio-input-host-pci-{non-}traditional in qemu, let's add a standard model= attribute. This just adds the domain_conf wiring Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:41 +00:00
</controller>
conf: Add <filesystem model='virtio-{non-}transitional'/> <filesystem> devices lack the model= attribute which is used by most other device types. To eventually support virtio-9p-pci-{non-}traditional in qemu, let's add a standard model= attribute. The accepted values are: - virtio - virtio-transitional - virtio-non-transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:36 +00:00
<filesystem type='mount' accessmode='passthrough' model='virtio-non-transitional'>
<source dir='/export/fs1'/>
<target dir='fs1'/>
<address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
</filesystem>
qemu: Support interface model=virtio-{non-}transitional Add new <interface> model handling for virtio transitional devices. Ex: <interface> <model type='virtio-transitional'/> </interface> * "virtio-transitional" maps to qemu "virtio-net-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-net-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:32 +00:00
<interface type='user'>
<mac address='00:11:22:33:44:55'/>
<model type='virtio-non-transitional'/>
conf: Add <filesystem model='virtio-{non-}transitional'/> <filesystem> devices lack the model= attribute which is used by most other device types. To eventually support virtio-9p-pci-{non-}traditional in qemu, let's add a standard model= attribute. The accepted values are: - virtio - virtio-transitional - virtio-non-transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:36 +00:00
<address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
qemu: Support interface model=virtio-{non-}transitional Add new <interface> model handling for virtio transitional devices. Ex: <interface> <model type='virtio-transitional'/> </interface> * "virtio-transitional" maps to qemu "virtio-net-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-net-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:32 +00:00
</interface>
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
qemu: populate <audio> element with default config Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable - VNC - set to "none", unless passthrough of host env variable is set - SPICE - always set to "spice" - SDL - always passthrough host env - No graphics - set to "none", unless passthrough of host env variable is set The setting of the QEMU_AUDIO_DRV env variable is done in the code which configures graphics. If no <audio> element is present, we now auto-populate <audio> elements to reflect this historical default config. This avoids need to set audio env when processing graphics. Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-24 14:24:10 +00:00
<audio id='1' type='none'/>
conf: Add <hostdev model='virtio-{non-}transitional'/> qemu vhost-scsi devices map to XML roughly like: <hostdev mode='subsystem' type='scsi_host'> <source protocol='vhost' wwpn=X/> </hostdev> To support vhost-scsi-pci-{non-}traditional in qemu, we need to to extend the SCSI Host hostdev XML to handle model= value. This matches the XML model= format used for mediated devices. This is just the domain_conf bits and some XML test cases. Use of virtio-X naming here does not match the hostdev protocol=vhost nor does it match the qemu vhost-X device naming, however it's more consistent with all other model= names in this area, and also matches the inconsistency of <vsock> devices which use model=virtio but map to vhost-vsock on the qemu commandline Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:33 +00:00
<hostdev mode='subsystem' type='scsi_host' managed='no' model='virtio-non-transitional'>
<source protocol='vhost' wwpn='naa.5123456789abcde0'/>
qemu: Support scsi controller model=virtio-{non-}transitional Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:43 +00:00
<address type='pci' domain='0x0000' bus='0x06' slot='0x00' function='0x0'/>
conf: Add <hostdev model='virtio-{non-}transitional'/> qemu vhost-scsi devices map to XML roughly like: <hostdev mode='subsystem' type='scsi_host'> <source protocol='vhost' wwpn=X/> </hostdev> To support vhost-scsi-pci-{non-}traditional in qemu, we need to to extend the SCSI Host hostdev XML to handle model= value. This matches the XML model= format used for mediated devices. This is just the domain_conf bits and some XML test cases. Use of virtio-X naming here does not match the hostdev protocol=vhost nor does it match the qemu vhost-X device naming, however it's more consistent with all other model= names in this area, and also matches the inconsistency of <vsock> devices which use model=virtio but map to vhost-vsock on the qemu commandline Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:33 +00:00
</hostdev>
qemu: Add implicit watchdog for q35 machine types The iTCO watchdog is part of the q35 machine type since its inception, we just did not add it implicitly. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2137346 Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-01-20 10:22:22 +00:00
<watchdog model='itco' action='reset'/>
qemu: Support memballoon model=virtio-{non-}transitional Add new <memballoon> model values for virtio transitional devices. Ex: <memballoon model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-balloon-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-balloon-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:39 +00:00
<memballoon model='virtio-non-transitional'>
qemu: Support scsi controller model=virtio-{non-}transitional Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:43 +00:00
<address type='pci' domain='0x0000' bus='0x07' slot='0x00' function='0x0'/>
qemu: Support memballoon model=virtio-{non-}transitional Add new <memballoon> model values for virtio transitional devices. Ex: <memballoon model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-balloon-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-balloon-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:39 +00:00
</memballoon>
qemu: Support rng model=virtio-{non-}transitional Add new <rng> model values for virtio transitional devices. Ex: <rng model='virtio-transitional'> ... </rng> * "virtio-transitional" maps to qemu "virtio-rng-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-rng-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:35 +00:00
<rng model='virtio-non-transitional'>
<backend model='random'>/dev/urandom</backend>
qemu: Support scsi controller model=virtio-{non-}transitional Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:43 +00:00
<address type='pci' domain='0x0000' bus='0x08' slot='0x00' function='0x0'/>
qemu: Support rng model=virtio-{non-}transitional Add new <rng> model values for virtio transitional devices. Ex: <rng model='virtio-transitional'> ... </rng> * "virtio-transitional" maps to qemu "virtio-rng-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-rng-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:35 +00:00
</rng>
qemu: Support vsock model=virtio-{non-}transitional Add <vsock> model handling for virtio transitional devices. Ex: <vsock model='virtio-transitional'> ... </vsock> * "virtio-transitional" maps to qemu "vhost-vsock-pci-transitional" * "virtio-non-transitional" maps to qemu "vhost-vsock-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:40 +00:00
<vsock model='virtio-non-transitional'>
<cid auto='no' address='4'/>
qemu: remove support for transitional virtio-input-host This device was virtio 1.0-only so adding the (non-)transitional model did not make sense and it was only present in QEMU 4.0. Report a validation error for both of the users that will ever hit this code path. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2022-01-18 17:03:55 +00:00
<address type='pci' domain='0x0000' bus='0x09' slot='0x00' function='0x0'/>
qemu: Support vsock model=virtio-{non-}transitional Add <vsock> model handling for virtio transitional devices. Ex: <vsock model='virtio-transitional'> ... </vsock> * "virtio-transitional" maps to qemu "vhost-vsock-pci-transitional" * "virtio-non-transitional" maps to qemu "vhost-vsock-pci-non-transitional" Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-17 17:52:40 +00:00
</vsock>
conf: Add <disk model='virtio-{non-}transitional'/> <disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-11 20:06:05 +00:00
</devices>
</domain>
Reference in New Issue Copy Permalink