External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-27 08:05:24 +00:00
Code Issues Packages Projects Releases Wiki Activity
f95dc8286f
libvirt/tests/qemuxml2argvdata/boot-strict.args

47 lines
2.0 KiB
Plaintext
Raw Normal View History

tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
LC_ALL=C \
PATH=/bin \
qemu: command: Override HOME variable for system QEMU By default, qemu user's home dir points to '/' which shouldn't be used at all. We therefore pass the HOME variable from the current variable iff not running as SUID, which means that for systemd we never set it. This patch makes sure, that for system QEMU this is always set to libDir/<driver>, session mode is left untouched. Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-06 12:29:01 +00:00
HOME=/tmp/lib/domain--1-QEMUGuest1 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
USER=test \
LOGNAME=test \
qemu: command: Enforce setting XDG variables for system QEMU For session mode, only XDG_CACHE_HOME is set, because we want to remain integrating with services in user session, but for system mode, this would have become reading/writing to '/' which carries the obvious issue with permissions (also, '/' is the wrong location in 99.9% cases anyway). Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-08 11:15:07 +00:00
XDG_DATA_HOME=/tmp/lib/domain--1-QEMUGuest1/.local/share \
XDG_CACHE_HOME=/tmp/lib/domain--1-QEMUGuest1/.cache \
XDG_CONFIG_HOME=/tmp/lib/domain--1-QEMUGuest1/.config \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
QEMU_AUDIO_DRV=none \
tests: fix name of 32-bit x86 QEMU binary The 32-bit x86 binary is called qemu-system-i386, not qemu-system-i686. This mistake across many test XML files was not noticed because the mistake was also made in testutilsqemu.c when mocking the capabilities. Reviewed-by: Erik Skultety <eskultet@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-29 16:33:37 +00:00
/usr/bin/qemu-system-i386 \
qemu: assume -name is always available The -name arg was added in QEMU 0.9.1, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:41 +00:00
-name QEMUGuest1 \
tests: add forgotten boot-strict test files These *should* have been pushed in commit 96fddee322c7d39a57cfdc5e7be71326d597d30a.
2013-12-03 10:58:50 +00:00
-S \
qemu: deprecate QEMU_CAPS_MACHINE_USB_OPT Implied by QEMU >= 1.3.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-machine pc,accel=tcg,usb=off,dump-guest-core=off \
tests: add forgotten boot-strict test files These *should* have been pushed in commit 96fddee322c7d39a57cfdc5e7be71326d597d30a.
2013-12-03 10:58:50 +00:00
-m 214 \
qemu: Always assume QEMU_CAPS_REALTIME_MLOCK The '-realtime mlock' cmd line argument was introduced in QEMU commit v1.5.0-rc0~190 which matches minimal QEMU version we require. Therefore, the capability will always be present. Apparently, nearly none of our xml2argv test cases had the capability hence slightly bigger change under qemuxml2argvdata/. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-12 08:03:36 +00:00
-realtime mlock=off \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 11:29:16 +00:00
-smp 1,sockets=1,cores=1,threads=1 \
qemu: assume -uuid is always available The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:52 +00:00
-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \
qemu: deprecate QEMU_CAPS_DISPLAY Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-display none \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-user-config \
tests: add forgotten boot-strict test files These *should* have been pushed in commit 96fddee322c7d39a57cfdc5e7be71326d597d30a.
2013-12-03 10:58:50 +00:00
-nodefaults \
qemuxml2argvtest: Use internal wrapping of command line arguments virCommandToString has the possibility to return an already wrapped string with better format than what we get from the test wrapper script. The main advantage is that arguments for an option are always on the same line which makes it more easy to see what changed in a diff and prevents re-wrapping of the line if a wrapping point moves over the threshold. Additionally the used output is the same we have in the VM log file when a VM is starting. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-31 08:46:36 +00:00
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-QEMUGuest1/monitor.sock,server=on,wait=off \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-28 22:04:58 +00:00
-mon chardev=charmonitor,id=monitor,mode=control \
qemu: deprecate QEMU_CAPS_RTC Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-rtc base=utc \
qemu: deprecate QEMU_CAPS_NO_SHUTDOWN Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-shutdown \
tests: add forgotten boot-strict test files These *should* have been pushed in commit 96fddee322c7d39a57cfdc5e7be71326d597d30a.
2013-12-03 10:58:50 +00:00
-no-acpi \
-boot strict=on \
-usb \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 14:13:52 +00:00
-drive file=/tmp/vda.img,format=raw,if=none,id=drive-virtio-disk0 \
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=3 \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 14:13:52 +00:00
-drive file=/tmp/vdb.img,format=raw,if=none,id=drive-virtio-disk1 \
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk1,id=virtio-disk1 \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 14:13:52 +00:00
-drive file=/dev/HostVG/hda,format=raw,if=none,id=drive-ide0-0-0 \
qemu: caps: Always assume presence of 'ide-hd' and 'ide-cd' devices The split of ide-disk into the two separate devices was introduced by qemu commit 1f56e32a7f4b3 released in qemu v0.15. Note that when compared to the previous commit which made sure that no disk related tests were touched, in this case it's not as careful. Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-01-28 13:44:57 +00:00
-device ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 14:13:52 +00:00
-drive file=/dev/HostVG/hdb,format=raw,if=none,id=drive-ide0-0-1 \
qemu: caps: Always assume presence of 'ide-hd' and 'ide-cd' devices The split of ide-disk into the two separate devices was introduced by qemu commit 1f56e32a7f4b3 released in qemu v0.15. Note that when compared to the previous commit which made sure that no disk related tests were touched, in this case it's not as careful. Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-01-28 13:44:57 +00:00
-device ide-hd,bus=ide.0,unit=1,drive=drive-ide0-0-1,id=ide0-0-1 \
-drive file=/dev/HostVG/hdc,format=raw,if=none,id=drive-ide0-1-0,readonly=on \
-device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0,bootindex=1 \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 14:13:52 +00:00
-drive file=/dev/fd0,format=raw,if=none,id=drive-fdc0-0-0 \
qemu: command: Don't format -device isa-fdc,... twice with two floppy drives Fix regression introduced in <42fd5a58adb>. With q35 machine type which requires the explicitly specified FDC we'd format twoisa-fdc controllers to the command line as the code was moved to a place where it's called per-disk. Move the call back after formatting all disks and reiterate the disks to find the floppy controllers. This also moves the '-global' directive which sets up the default ISA-FDC to the end after all the disks but since we are modifying the properties it is safe to do so. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-08-09 11:50:22 +00:00
-drive file=/dev/fd1,format=raw,if=none,id=drive-fdc0-0-1 \
tests: add forgotten boot-strict test files These *should* have been pushed in commit 96fddee322c7d39a57cfdc5e7be71326d597d30a.
2013-12-03 10:58:50 +00:00
-global isa-fdc.driveA=drive-fdc0-0-0 \
-global isa-fdc.bootindexA=4 \
-global isa-fdc.driveB=drive-fdc0-0-1 \
qemu: deprecate QEMU_CAPS_NETDEV This makes qemuDomainSupportsNetdev identical to qemuDomainSupportsNicdev and leaves some code in qemuDomainAttachNetDevice to be cleaned up later. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-28 21:36:13 +00:00
-netdev user,id=hostnet0 \
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=00:11:22:33:44:11,bus=pci.0,addr=0x2,bootindex=2 \
qemu: deprecate QEMU_CAPS_NETDEV This makes qemuDomainSupportsNetdev identical to qemuDomainSupportsNicdev and leaves some code in qemuDomainAttachNetDevice to be cleaned up later. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-28 21:36:13 +00:00
-netdev user,id=hostnet1 \
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch Until we clean up and remove all capabilities which no longer make sense to have separately, we should use virQEMUCapsInitQMPBasicArch to set the defaults as it's used by qemuxml2argvtest when testing with fake capabilities. This allows us to prevent testing dead code paths with the fake capability tests. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-03-30 15:48:46 +00:00
-device virtio-net-pci,netdev=hostnet1,id=net1,mac=00:11:22:33:44:22,bus=pci.0,addr=0x3
Reference in New Issue Copy Permalink