External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-25 23:25:24 +00:00
Code Issues Packages Projects Releases Wiki Activity
fbc72a1d0b
libvirt/tests/qemuxml2argvdata/qemuxml2argv-net-hostdev.xml

36 lines
1.2 KiB
XML
Raw Normal View History

conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<domain type='qemu'>
<name>QEMUGuest1</name>
<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
xml: output memory unit for clarity Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-02-23 00:48:38 +00:00
<memory unit='KiB'>219136</memory>
<currentMemory unit='KiB'>219136</currentMemory>
numad: Always output 'placement' of <vcpu> <vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs).
2012-05-08 16:04:36 +00:00
<vcpu placement='static'>1</vcpu>
conf: parse/format type='hostdev' network interfaces This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
2012-02-15 17:37:15 +00:00
<os>
<type arch='i686' machine='pc'>hvm</type>
<boot dev='hd'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>/usr/bin/qemu</emulator>
<disk type='block' device='disk'>
<source dev='/dev/HostVG/QEMUGuest1'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<controller type='usb' index='0'/>
<controller type='ide' index='0'/>
<interface type='hostdev' managed='yes'>
<mac address='00:11:22:33:44:55'/>
<source>
<address type='pci' domain='0x0002' bus='0x03' slot='0x07' function='0x1'/>
</source>
<virtualport type='802.1Qbg'>
<parameters managerid='11' typeid='1193047' typeidversion='2' instanceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/>
</virtualport>
</interface>
<memballoon model='virtio'/>
</devices>
</domain>
Reference in New Issue Copy Permalink