diff --git a/docs/formatnetwork.html.in b/docs/formatnetwork.html.in index cbec7af59e..f9421c3f84 100644 --- a/docs/formatnetwork.html.in +++ b/docs/formatnetwork.html.in @@ -142,35 +142,6 @@ with the idiosyncrasies of the platform where libvirt is running. Since 0.8.8 -
ip
address
attribute defines an IPv4 address in
- dotted-decimal format, or an IPv6 address in standard
- colon-separated hexadecimal format, that will be configured on
- the bridge
- device associated with the virtual network. To the guests this
- address will be their default route. For IPv4 addresses, the netmask
- attribute defines the significant bits of the network address,
- again specified in dotted-decimal format. For IPv6 addresses,
- and as an alternate method for IPv4 addresses, you can specify
- the significant bits of the network address with the prefix
- attribute, which is an integer (for example, netmask='255.255.255.0'
- could also be given as prefix='24'
. The family
- attribute is used to specify the type of address - 'ipv4' or 'ipv6'; if no
- family
is given, 'ipv4' is assumed. A network can have more than
- one of each family of address defined, but only a single address can have a
- dhcp
or tftp
element. Since 0.3.0;
- IPv6, multiple addresses on a single network, family
, and
- prefix
since 0.8.7
- tftp
ip
element there is an optional tftp
- element. The presence of this element and of its attribute
- root
enables TFTP services. The attribute specifies
- the path to the root directory served via TFTP. tftp
is not
- supported for IPv6 addresses, can only be specified on a single IPv4 address
- per network.
- Since 0.7.1
- dns
dhcp
ip
element there is an
- optional dhcp
element. The presence of this element
- enables DHCP services on the virtual network. It will further
- contain one or more range
elements. The
- dhcp
element is not supported for IPv6, and
- is only supported on a single IP address per network for IPv4.
- Since 0.3.0
- range
start
and end
attributes on the
- range
element specify the boundaries of a pool of
- IPv4 addresses to be provided to DHCP clients. These two addresses
- must lie within the scope of the network defined on the parent
- ip
element. Since 0.3.0
- host
dhcp
element there may be zero or more
- host
elements; these specify hosts which will be given
- names and predefined IP addresses by the built-in DHCP server. Any
- such element must specify the MAC address of the host to be assigned
- a given name (via the mac
attribute), the IP to be
- assigned to that host (via the ip
attribute), and the
- name to be given that host by the DHCP server (via the
- name
attribute). Since 0.4.5
- bootp
bootp
- element specifies BOOTP options to be provided by the DHCP server.
- Two attributes are supported: file
is mandatory and
- gives the file to be used for the boot image; server
is
- optional and gives the address of the TFTP server from which the boot
- image will be fetched. server
defaults to the same host
- that runs the DHCP server, as is the case when the tftp
- element is used. The BOOTP options currently have to be the same
- for all address ranges and statically assigned addresses.Since 0.7.1 (server
since 0.7.3).
+ ip
address
attribute defines an IPv4 address in
+ dotted-decimal format, or an IPv6 address in standard
+ colon-separated hexadecimal format, that will be configured on
+ the bridge
+ device associated with the virtual network. To the guests this
+ address will be their default route. For IPv4 addresses, the netmask
+ attribute defines the significant bits of the network address,
+ again specified in dotted-decimal format. For IPv6 addresses,
+ and as an alternate method for IPv4 addresses, you can specify
+ the significant bits of the network address with the prefix
+ attribute, which is an integer (for example, netmask='255.255.255.0'
+ could also be given as prefix='24'
. The family
+ attribute is used to specify the type of address - 'ipv4' or 'ipv6'; if no
+ family
is given, 'ipv4' is assumed. A network can have more than
+ one of each family of address defined, but only a single address can have a
+ dhcp
or tftp
element. Since 0.3.0;
+ IPv6, multiple addresses on a single network, family
, and
+ prefix
since 0.8.7
+ tftp
ip
element there is an optional tftp
+ element. The presence of this element and of its attribute
+ root
enables TFTP services. The attribute specifies
+ the path to the root directory served via TFTP. tftp
is not
+ supported for IPv6 addresses, and can only be specified on a single IPv4 address
+ per network.
+ Since 0.7.1
+ dhcp
ip
element there is an
+ optional dhcp
element. The presence of this element
+ enables DHCP services on the virtual network. It will further
+ contain one or more range
elements. The
+ dhcp
element is not supported for IPv6, and
+ is only supported on a single IP address per network for IPv4.
+ Since 0.3.0
+ range
start
and end
attributes on the
+ range
element specify the boundaries of a pool of
+ IPv4 addresses to be provided to DHCP clients. These two addresses
+ must lie within the scope of the network defined on the parent
+ ip
element. Since 0.3.0
+ host
dhcp
element there may be zero or more
+ host
elements; these specify hosts which will be given
+ names and predefined IP addresses by the built-in DHCP server. Any
+ such element must specify the MAC address of the host to be assigned
+ a given name (via the mac
attribute), the IP to be
+ assigned to that host (via the ip
attribute), and the
+ name to be given that host by the DHCP server (via the
+ name
attribute). Since 0.4.5
+ bootp
bootp
+ element specifies BOOTP options to be provided by the DHCP server.
+ Two attributes are supported: file
is mandatory and
+ gives the file to be used for the boot image; server
is
+ optional and gives the address of the TFTP server from which the boot
+ image will be fetched. server
defaults to the same host
+ that runs the DHCP server, as is the case when the tftp
+ element is used. The BOOTP options currently have to be the same
+ for all address ranges and statically assigned addresses.Since 0.7.1 (server
since 0.7.3).
+