Add docs about cgroups layout and usage

Describe the new cgroups layout, how to customize placement
of guests and what virsh commands are used to access the
parameters.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This commit is contained in:
Daniel P. Berrange 2013-05-03 16:58:26 +01:00
parent f4bb7b4807
commit 486a86eb18
2 changed files with 289 additions and 0 deletions

285
docs/cgroups.html.in Normal file
View File

@ -0,0 +1,285 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<body>
<h1>Control Groups Resource Management</h1>
<ul id="toc"></ul>
<p>
The QEMU and LXC drivers make use of the Linux "Control Groups" facility
for applying resource management to their virtual machines and containers.
</p>
<h2><a name="requiredControllers">Required controllers</a></h2>
<p>
The control groups filesystem supports multiple "controllers". By default
the init system (such as systemd) should mount all controllers compiled
into the kernel at <code>/sys/fs/cgroup/$CONTROLLER-NAME</code>. Libvirt
will never attempt to mount any controllers itself, merely detect where
they are mounted.
</p>
<p>
The QEMU driver is capable of using the <code>cpuset</code>,
<code>cpu</code>, <code>memory</code>, <code>blkio</code> and
<code>devices</code> controllers. None of them are compulsory.
If any controller is not mounted, the resource management APIs
which use it will cease to operate. It is possible to explicitly
turn off use of a controller, even when mounted, via the
<code>/etc/libvirt/qemu.conf</code> configuration file.
</p>
<p>
The LXC driver is capable of using the <code>cpuset</code>,
<code>cpu</code>, <code>cpuset</code>, <code>freezer</code>,
<code>memory</code>, <code>blkio</code> and <code>devices</code>
controllers. The <code>cpuset</code>, <code>devices</code>
and <code>memory</code> controllers are compulsory. Without
them mounted, no containers can be started. If any of the
other controllers are not mounted, the resource management APIs
which use them will cease to operate.
</p>
<h2><a name="currentLayout">Current cgroups layout</a></h2>
<p>
As of libvirt 1.0.5 or later, the cgroups layout created by libvirt has been
simplified, in order to facilitate the setup of resource control policies by
administrators / management applications. The layout is based on the concepts of
"partitions" and "consumers". Each virtual machine or container is a consumer,
and has a corresponding cgroup named <code>$VMNAME.libvirt-{qemu,lxc}</code>.
Each consumer is associated with exactly one partition, which also have a
corresponding cgroup usually named <code>$PARTNAME.partition</code>. The
exceptions to this naming rule are the three top level default partitions,
named <code>/system</code> (for system services), <code>/user</code> (for
user login sessions) and <code>/machine</code> (for virtual machines and
containers). By default every consumer will of course be associated with
the <code>/machine</code> partition. This leads to a hierarchy that looks
like
</p>
<pre>
$ROOT
|
+- system
| |
| +- libvirtd.service
|
+- machine
|
+- vm1.libvirt-qemu
| |
| +- emulator
| +- vcpu0
| +- vcpu1
|
+- vm2.libvirt-qemu
| |
| +- emulator
| +- vcpu0
| +- vcpu1
|
+- vm3.libvirt-qemu
| |
| +- emulator
| +- vcpu0
| +- vcpu1
|
+- container1.libvirt-lxc
|
+- container2.libvirt-lxc
|
+- container3.libvirt-lxc
</pre>
<p>
The default cgroups layout ensures that, when there is contention for
CPU time, it is shared equally between system services, user sessions
and virtual machines / containers. This prevents virtual machines from
locking the administrator out of the host, or impacting execution of
system services. Conversely, when there is no contention from
system services / user sessions, it is possible for virtual machines
to fully utilize the host CPUs.
</p>
<h2><a name="customPartiton">Using custom partitions</a></h2>
<p>
If there is a need to apply resource constraints to groups of
virtual machines or containers, then the single default
partition <code>/machine</code> may not be sufficiently
flexible. The administrator may wish to sub-divide the
default partition, for example into "testing" and "production"
partitions, and then assign each guest to a specific
sub-partition. This is achieved via a small element addition
to the guest domain XML config, just below the main <code>domain</code>
element
</p>
<pre>
...
&lt;resource&gt;
&lt;partition&gt;/machine/production&lt;/partition&gt;
&lt;/resource&gt;
...
</pre>
<p>
Libvirt will not auto-create the cgroups directory to back
this partition. In the future, libvirt / virsh will provide
APIs / commands to create custom partitions, but currently
this is left as an exercise for the administrator. For
example, given the XML config above, the admin would need
to create a cgroup named '/machine/production.partition'
</p>
<pre>
# cd /sys/fs/cgroup
# for i in blkio cpu,cpuacct cpuset devices freezer memory net_cls perf_event
do
mkdir $i/machine/production.partition
done
# for i in cpuset.cpus cpuset.mems
do
cat cpuset/machine/$i > cpuset/machine/production.partition/$i
done
</pre>
<p>
<strong>Note:</strong> the cgroups directory created as a ".partition"
suffix, but the XML config does not require this suffix.
</p>
<p>
<strong>Note:</strong> the ability to place guests in custom
partitions is only available with libvirt &gt;= 1.0.5, using
the new cgroup layout. The legacy cgroups layout described
later did not support customization per guest.
</p>
<h2><a name="resourceAPIs">Resource management APIs/commands</a></h2>
<p>
Since libvirt aims to provide an API which is portable across
hypervisors, the concept of cgroups is not exposed directly
in the API or XML configuration. It is considered to be an
internal implementation detail. Instead libvirt provides a
set of APIs for applying resource controls, which are then
mapped to corresponding cgroup tunables
</p>
<h3>Scheduler tuning</h3>
<p>
Parameters from the "cpu" controller are exposed via the
<code>schedinfo</code> command in virsh.
</p>
<pre>
# virsh schedinfo demo
Scheduler : posix
cpu_shares : 1024
vcpu_period : 100000
vcpu_quota : -1
emulator_period: 100000
emulator_quota : -1</pre>
<h3>Block I/O tuning</h3>
<p>
Parameters from the "blkio" controller are exposed via the
<code>bkliotune</code> command in virsh.
</p>
<pre>
# virsh blkiotune demo
weight : 500
device_weight : </pre>
<h3>Memory tuning</h3>
<p>
Parameters from the "memory" controller are exposed via the
<code>memtune</code> command in virsh.
</p>
<pre>
# virsh memtune demo
hard_limit : 580192
soft_limit : unlimited
swap_hard_limit: unlimited
</pre>
<h3>Network tuning</h3>
<p>
The <code>net_cls</code> is not currently used. Instead traffic
filter policies are set directly against individual virtual
network interfaces.
</p>
<h2><a name="legacyLayout">Legacy cgroups layout</a></h2>
<p>
Prior to libvirt 1.0.5, the cgroups layout created by libvirt was different
from that described above, and did not allow for administrator customization.
Libvirt used a fixed, 3-level hierarchy <code>libvirt/{qemu,lxc}/$VMNAME</code>
which was rooted at the point in the hierarchy where libvirtd itself was
located. So if libvirtd was placed at <code>/system/libvirtd.service</code>
by systemd, the groups for each virtual machine / container would be located
at <code>/system/libvirtd.service/libvirt/{qemu,lxc}/$VMNAME</code>. In addition
to this, the QEMU drivers further child groups for each vCPU thread and the
emulator thread(s). This leads to a hierarchy that looked like
</p>
<pre>
$ROOT
|
+- system
|
+- libvirtd.service
|
+- libvirt
|
+- qemu
| |
| +- vm1
| | |
| | +- emulator
| | +- vcpu0
| | +- vcpu1
| |
| +- vm2
| | |
| | +- emulator
| | +- vcpu0
| | +- vcpu1
| |
| +- vm3
| |
| +- emulator
| +- vcpu0
| +- vcpu1
|
+- lxc
|
+- container1
|
+- container2
|
+- container3
</pre>
<p>
Although current releases are much improved, historically the use of deep
hierarchies has had a significant negative impact on the kernel scalability.
The legacy libvirt cgroups layout highlighted these problems, to the detriment
of the performance of virtual machines and containers.
</p>
</body>
</html>

View File

@ -88,6 +88,10 @@
<a href="locking.html">Disk locking</a>
<span>Ensuring exclusive guest access to disks</span>
</li>
<li>
<a href="cgroups.html">CGroups</a>
<span>Control groups integration</span>
</li>
<li>
<a href="hooks.html">Hooks</a>
<span>Hooks for system specific management</span>