configure: Provide OpenRC scripts for sub-daemons

There is plenty of distributions that haven't switched to
systemd nor they force their users to (Gentoo, Alpine Linux to
name a few). With the daemon split merged their only option is to
still use the monolithic daemon which will go away eventually.
Provide init scripts for these distros too.

For now, I'm not introducing config files which would correspond
to the init files except for libvirtd and virtproxyd init scripts
where it might be desirable to tweak the command line of
corresponding daemons.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>

m4/virt-init-script.m4

@@ -19,7 +19,7 @@ dnl
 
 AC_DEFUN([LIBVIRT_ARG_INIT_SCRIPT],[
     LIBVIRT_ARG_WITH([INIT_SCRIPT],
-                     [Style of init script to install: systemd, check, none],
+                     [Style of init script to install: systemd, openrc, check, none],
                      [check])
 ])
 
@@ -32,12 +32,16 @@ AC_DEFUN([LIBVIRT_CHECK_INIT_SCRIPT],[
     if test "$with_init_script" = check && type systemctl >/dev/null 2>&1; then
         with_init_script=systemd
     fi
+    if test "$with_init_script" = check && type openrc >/dev/null 2>&1; then
+        with_init_script=openrc
+    fi
     if test "$with_init_script" = check; then
         with_init_script=none
     fi
 
     AS_CASE([$with_init_script],
         [systemd],[],
+        [openrc],[],
         [none],[],
         [*],[
             AC_MSG_ERROR([Unknown initscript flavour $with_init_script])
@@ -46,6 +50,8 @@ AC_DEFUN([LIBVIRT_CHECK_INIT_SCRIPT],[
 
     AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_SYSTEMD],
                    [test "$with_init_script" = "systemd"])
+    AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_OPENRC],
+                   [test "$with_init_script" = "openrc"])
 
     AC_MSG_RESULT($with_init_script)
 ])

src/Makefile.am

@@ -84,6 +84,9 @@ RPC_PROBE_FILES =
 LOGROTATE_FILES_IN =
 SYSTEMD_UNIT_FILES =
 SYSTEMD_UNIT_FILES_IN =
+OPENRC_INIT_FILES =
+OPENRC_INIT_FILES_IN =
+OPENRC_CONF_FILES =
 SYSCONF_FILES =
 sbin_PROGRAMS =
 DRIVER_SOURCES =
@@ -529,7 +532,9 @@ libvirt_lxc_la_LDFLAGS = \
 libvirt_lxc_la_CFLAGS = $(AM_CFLAGS)
 libvirt_lxc_la_LIBADD = libvirt.la $(CYGWIN_EXTRA_LIBADD)
 
-EXTRA_DIST += $(SYSCONF_FILES)
+EXTRA_DIST += \
+	$(SYSCONF_FILES) \
+	$(OPENRC_CONF_FILES)
 
 install-sysconfig:
 	$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sysconfig
@@ -548,6 +553,25 @@ uninstall-sysconfig:
 	done
 	rmdir $(DESTDIR)$(sysconfdir)/sysconfig || :
 
+OPENRC_CONF_DIR = $(sysconfdir)/conf.d
+
+install-openrc-conf:
+	$(MKDIR_P) $(DESTDIR)$(OPENRC_CONF_DIR)
+	for f in $(OPENRC_CONF_FILES:%.confd=%) ; \
+	do \
+		tgt=`basename $$f`; \
+		$(INSTALL_DATA) $(srcdir)/$$f.confd \
+			$(DESTDIR)$(OPENRC_CONF_DIR)/$$tgt; \
+	done
+
+uninstall-openrc-conf:
+	for f in $(OPENRC_CONF_FILES:%.confd=%) ; \
+	do \
+		tgt=`basename $$f`; \
+		rm -f $(DESTDIR)$(OPENRC_CONF_DIR)/$$tgt; \
+	done
+	rmdir $(DESTDIR)$(OPENRC_CONF_DIR) || :
+
 LOGROTATE_FILES := $(LOGROTATE_FILES_IN:remote/%.in=%)
 
 EXTRA_DIST += $(LOGROTATE_FILES_IN)
@@ -582,6 +606,7 @@ endif WITH_LIBVIRTD
 
 EXTRA_DIST += \
         $(SYSTEMD_UNIT_FILES_IN) \
+        $(OPENRC_INIT_FILES_IN) \
         $(NULL)
 
 
@@ -607,6 +632,35 @@ uninstall-systemd: uninstall-sysconfig
 INSTALL_DATA_LOCAL += install-systemd
 UNINSTALL_LOCAL += uninstall-systemd
 endif LIBVIRT_INIT_SCRIPT_SYSTEMD
+
+if LIBVIRT_INIT_SCRIPT_OPENRC
+
+OPENRC_INIT_DIR = $(sysconfdir)/init.d
+
+BUILT_SOURCES += $(OPENRC_INIT_FILES)
+DISTCLEANFILES += $(OPENRC_INIT_FILES)
+
+install-openrc: $(OPENRC_INIT_FILES) install-openrc-conf
+	$(MKDIR_P) $(DESTDIR)$(OPENRC_INIT_DIR)
+	for f in $(OPENRC_INIT_FILES:%.init=%) ; \
+	do \
+		tgt=`basename $$f`; \
+		$(INSTALL_SCRIPT) $$f.init \
+		$(DESTDIR)$(OPENRC_INIT_DIR)/$$tgt ; \
+	done
+
+uninstall-openrc: uninstall-openrc-conf
+	for f in $(OPENRC_INIT_FILES:%.init=%) ; \
+	do \
+		tgt=`basename $$f`; \
+		rm -f $(DESTDIR)$(OPENRC_INIT_DIR)/$$tgt ; \
+	done
+	rmdir $(DESTDIR)$(OPENRC_INIT_DIR) || :
+
+INSTALL_DATA_LOCAL += install-openrc
+UNINSTALL_LOCAL += uninstall-openrc
+endif LIBVIRT_INIT_SCRIPT_OPENRC
+
 endif WITH_LIBVIRTD
 
 

src/interface/Makefile.inc.am

@@ -72,6 +72,13 @@ SYSTEMD_UNIT_FILES_IN += \
 	interface/virtinterfaced.service.in \
 	$(NULL)
 
+OPENRC_INIT_FILES += \
+	virtinterfaced.init \
+	$(NULL)
+OPENRC_INIT_FILES_IN += \
+	interface/virtinterfaced.init.in \
+	$(NULL)
+
 VIRTINTERFACED_UNIT_VARS = \
 	$(VIRTD_UNIT_VARS) \
 	-e 's|[@]name[@]|Libvirt interface|g' \
@@ -79,6 +86,10 @@ VIRTINTERFACED_UNIT_VARS = \
 	-e 's|[@]sockprefix[@]|virtinterfaced|g' \
 	$(NULL)
 
+virtinterfaced.init: interface/virtinterfaced.init.in \
+		$(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
 virtinterfaced.service: interface/virtinterfaced.service.in \
 		$(top_builddir)/config.status
 	$(AM_V_GEN)$(SED) $(VIRTINTERFACED_UNIT_VARS) $< > $@-t && mv $@-t $@

src/interface/virtinterfaced.init.in

@@ -0,0 +1,26 @@
+#!/sbin/openrc-run
+
+description="Virtualization interface daemon"
+
+VIRTINTERFACED_OPTS=${VIRTINTERFACED_OPTS:-"${VIRTINTERFACED_OPTS}"}
+VIRTINTERFACED_TIMEOUT=${VIRTINTERFACED_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/virtinterfaced"
+command_args="-d ${VIRTINTERFACED_OPTS}"
+pidfile="@runstatedir@/virtinterfaced.pid"
+retry="${VIRTINTERFACED_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    use dbus
+    after nfs nfsmount
+}
+
+reload() {
+    ebegin "re-exec() virtinterfaced"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}

src/libxl/Makefile.inc.am

@@ -83,6 +83,13 @@ SYSTEMD_UNIT_FILES_IN += \
 	libxl/virtxend.service.in \
 	$(NULL)
 
+OPENRC_INIT_FILES += \
+	virtxend.init \
+	$(NULL)
+OPENRC_INIT_FILES_IN += \
+	libxl/virtxend.init.in \
+	$(NULL)
+
 LIBXL_UNIT_COND = ConditionPathExists=/proc/xen/capabilities
 LIBXL_UNIT_CONFLICT = Conflicts=$(LIBVIRTD_SOCKET_UNIT_FILES)
 
@@ -94,6 +101,9 @@ VIRTXEND_UNIT_VARS = \
 	-e 's|[@]sockprefix[@]|virtxend|g' \
 	$(NULL)
 
+virtxend.init: libxl/virtxend.init.in $(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
 virtxend.service: libxl/virtxend.service.in $(top_builddir)/config.status
 	$(AM_V_GEN)$(SED) $(VIRTXEND_UNIT_VARS) $< > $@-t && mv $@-t $@
 

src/libxl/virtxend.init.in

@@ -0,0 +1,26 @@
+#!/sbin/openrc-run
+
+description="Virtualization xen daemon"
+
+VIRTXEND_OPTS=${VIRTXEND_OPTS:-"${VIRTXEND_OPTS}"}
+VIRTXEND_TIMEOUT=${VIRTXEND_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/virtxend"
+command_args="-d ${VIRTXEND_OPTS}"
+pidfile="@runstatedir@/virtxend.pid"
+retry="${VIRTXEND_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    use dbus
+    after nfs nfsmount
+}
+
+reload() {
+    ebegin "re-exec() virtxend"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}

src/lxc/Makefile.inc.am

@@ -146,6 +146,13 @@ SYSTEMD_UNIT_FILES_IN += \
 	lxc/virtlxcd.service.in \
 	$(NULL)
 
+OPENRC_INIT_FILES += \
+	virtlxcd.init \
+	$(NULL)
+OPENRC_INIT_FILES_IN += \
+	lxc/virtlxcd.init.in \
+	$(NULL)
+
 VIRTLXCD_UNIT_VARS = \
 	$(VIRTD_UNIT_VARS) \
 	-e 's|[@]name[@]|Libvirt lxc|g' \
@@ -153,6 +160,9 @@ VIRTLXCD_UNIT_VARS = \
 	-e 's|[@]sockprefix[@]|virtlxcd|g' \
 	$(NULL)
 
+virtlxcd.init: lxc/virtlxcd.init.in $(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
 virtlxcd.service: lxc/virtlxcd.service.in $(top_builddir)/config.status
 	$(AM_V_GEN)$(SED) $(VIRTLXCD_UNIT_VARS) $< > $@-t && mv $@-t $@
 

src/lxc/virtlxcd.init.in

@@ -0,0 +1,26 @@
+#!/sbin/openrc-run
+
+description="Virtualization lxc daemon"
+
+VIRTLXCD_OPTS=${VIRTLXCD_OPTS:-"${VIRTLXCD_OPTS}"}
+VIRTLXCD_TIMEOUT=${VIRTLXCD_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/virtlxcd"
+command_args="-d ${VIRTLXCD_OPTS}"
+pidfile="@runstatedir@/virtlxcd.pid"
+retry="${VIRTLXCD_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    use ceph dbus iscsid virtlockd
+    after nfs nfsmount
+}
+
+reload() {
+    ebegin "re-exec() virtlxcd"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}

src/network/Makefile.inc.am

@@ -80,6 +80,13 @@ SYSTEMD_UNIT_FILES_IN += \
 	network/virtnetworkd.service.in \
 	$(NULL)
 
+OPENRC_INIT_FILES += \
+	virtnetworkd.init \
+	$(NULL)
+OPENRC_INIT_FILES_IN += \
+	network/virtnetworkd.init.in \
+	$(NULL)
+
 VIRTNETWORKD_UNIT_VARS = \
 	$(VIRTD_UNIT_VARS) \
 	-e 's|[@]name[@]|Libvirt network|g' \
@@ -87,6 +94,9 @@ VIRTNETWORKD_UNIT_VARS = \
 	-e 's|[@]sockprefix[@]|virtnetworkd|g' \
 	$(NULL)
 
+virtnetworkd.init: network/virtnetworkd.init.in $(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
 virtnetworkd.service: network/virtnetworkd.service.in \
 		$(top_builddir)/config.status
 	$(AM_V_GEN)$(SED) $(VIRTNETWORKD_UNIT_VARS) $< > $@-t && mv $@-t $@

src/network/virtnetworkd.init.in

@@ -0,0 +1,26 @@
+#!/sbin/openrc-run
+
+description="Virtualization network daemon"
+
+VIRTNETWORKD_OPTS=${VIRTNETWORKD_OPTS:-"${VIRTNETWORKD_OPTS}"}
+VIRTNETWORKD_TIMEOUT=${VIRTNETWORKD_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/virtnetworkd"
+command_args="-d ${VIRTNETWORKD_OPTS}"
+pidfile="@runstatedir@/virtnetworkd.pid"
+retry="${VIRTNETWORKD_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    use ceph dbus iscsid virtlockd
+    after nfs nfsmount
+}
+
+reload() {
+    ebegin "re-exec() virtnetworkd"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}

src/node_device/Makefile.inc.am

@@ -96,6 +96,13 @@ SYSTEMD_UNIT_FILES_IN += \
 	node_device/virtnodedevd.service.in \
 	$(NULL)
 
+OPENRC_INIT_FILES += \
+	virtnodedevd.init \
+	$(NULL)
+OPENRC_INIT_FILES_IN += \
+	node_device/virtnodedevd.init.in \
+	$(NULL)
+
 VIRTNODEDEVD_UNIT_VARS = \
 	$(VIRTD_UNIT_VARS) \
 	-e 's|[@]name[@]|Libvirt nodedev|g' \
@@ -103,6 +110,10 @@ VIRTNODEDEVD_UNIT_VARS = \
 	-e 's|[@]sockprefix[@]|virtnodedevd|g' \
 	$(NULL)
 
+virtnodedevd.init: node_device/virtnodedevd.init.in \
+		$(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
 virtnodedevd.service: node_device/virtnodedevd.service.in \
 		$(top_builddir)/config.status
 	$(AM_V_GEN)$(SED) $(VIRTNODEDEVD_UNIT_VARS) $< > $@-t && mv $@-t $@

src/node_device/virtnodedevd.init.in

@@ -0,0 +1,26 @@
+#!/sbin/openrc-run
+
+description="Virtualization nodedev daemon"
+
+VIRTNODEDEVD_OPTS=${VIRTNODEDEVD_OPTS:-"${VIRTNODEDEVD_OPTS}"}
+VIRTNODEDEVD_TIMEOUT=${VIRTNODEDEVD_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/virtnodedevd"
+command_args="-d ${VIRTNODEDEVD_OPTS}"
+pidfile="@runstatedir@/virtnodedevd.pid"
+retry="${VIRTNODEDEVD_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    use ceph dbus iscsid virtlockd
+    after nfs nfsmount
+}
+
+reload() {
+    ebegin "re-exec() virtnodedevd"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}

src/nwfilter/Makefile.inc.am

@@ -81,6 +81,13 @@ SYSTEMD_UNIT_FILES_IN += \
 	nwfilter/virtnwfilterd.service.in \
 	$(NULL)
 
+OPENRC_INIT_FILES += \
+	virtnwfilterd.init \
+	$(NULL)
+OPENRC_INIT_FILES_IN += \
+	nwfilter/virtnwfilterd.init.in \
+	$(NULL)
+
 VIRTNWFILTERD_UNIT_VARS = \
 	$(VIRTD_UNIT_VARS) \
 	-e 's|[@]name[@]|Libvirt nwfilter|g' \
@@ -88,6 +95,10 @@ VIRTNWFILTERD_UNIT_VARS = \
 	-e 's|[@]sockprefix[@]|virtnwfilterd|g' \
 	$(NULL)
 
+virtnwfilterd.init: nwfilter/virtnwfilterd.init.in \
+		$(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
 virtnwfilterd.service: nwfilter/virtnwfilterd.service.in \
 		$(top_builddir)/config.status
 	$(AM_V_GEN)$(SED) $(VIRTNWFILTERD_UNIT_VARS) $< > $@-t && mv $@-t $@

src/nwfilter/virtnwfilterd.init.in

@@ -0,0 +1,26 @@
+#!/sbin/openrc-run
+
+description="Virtualization nwfilter daemon"
+
+VIRTNWFILTERD_OPTS=${VIRTNWFILTERD_OPTS:-"${VIRTNWFILTERD_OPTS}"}
+VIRTNWFILTERD_TIMEOUT=${VIRTNWFILTERD_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/virtnwfilterd"
+command_args="-d ${VIRTNWFILTERD_OPTS}"
+pidfile="@runstatedir@/virtnwfilterd.pid"
+retry="${VIRTNWFILTERD_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    use ceph dbus iscsid virtlockd
+    after nfs nfsmount
+}
+
+reload() {
+    ebegin "re-exec() virtnwfilterd"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}

src/qemu/Makefile.inc.am

@@ -154,6 +154,13 @@ SYSTEMD_UNIT_FILES_IN += \
 	qemu/virtqemud.service.in \
 	$(NULL)
 
+OPENRC_INIT_FILES += \
+	virtqemud.init \
+	$(NULL)
+OPENRC_INIT_FILES_IN += \
+	qemu/virtqemud.init.in \
+	$(NULL)
+
 VIRTQEMUD_UNIT_VARS = \
 	$(VIRTD_UNIT_VARS) \
 	-e 's|[@]name[@]|Libvirt qemu|g' \
@@ -161,6 +168,9 @@ VIRTQEMUD_UNIT_VARS = \
 	-e 's|[@]sockprefix[@]|virtqemud|g' \
 	$(NULL)
 
+virtqemud.init: qemu/virtqemud.init.in $(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
 virtqemud.service: qemu/virtqemud.service.in $(top_builddir)/config.status
 	$(AM_V_GEN)$(SED) $(VIRTQEMUD_UNIT_VARS) $< > $@-t && mv $@-t $@
 

src/qemu/virtqemud.init.in

@@ -0,0 +1,26 @@
+#!/sbin/openrc-run
+
+description="Virtualization qemu daemon"
+
+VIRTQEMUD_OPTS=${VIRTQEMUD_OPTS:-"${VIRTQEMUD_OPTS}"}
+VIRTQEMUD_TIMEOUT=${VIRTQEMUD_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/virtqemud"
+command_args="-d ${VIRTQEMUD_OPTS}"
+pidfile="@runstatedir@/virtqemud.pid"
+retry="${VIRTQEMUD_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    use ceph dbus iscsid virtlockd
+    after nfs nfsmount
+}
+
+reload() {
+    ebegin "re-exec() virtqemud"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}

src/remote/Makefile.inc.am

@@ -126,6 +126,19 @@ SYSTEMD_UNIT_FILES_IN += \
 	$(GUEST_UNIT_FILES_IN) \
 	$(NULL)
 
+OPENRC_INIT_FILES += \
+	libvirtd.init \
+	virtproxyd.init \
+	$(NULL)
+OPENRC_INIT_FILES_IN += \
+	remote/libvirtd.init.in \
+	remote/virtproxyd.init.in \
+	$(NULL)
+OPENRC_CONF_FILES += \
+	remote/libvirtd.confd \
+	remote/virtproxyd.confd \
+	$(NULL)
+
 REMOTE_PROTOCOL = $(srcdir)/remote/remote_protocol.x
 LXC_PROTOCOL = $(srcdir)/remote/lxc_protocol.x
 QEMU_PROTOCOL = $(srcdir)/remote/qemu_protocol.x
@@ -393,6 +406,17 @@ LIBVIRTD_UNIT_VARS = \
 	-e 's|[@]deps[@]||g' \
 	$(NULL)
 
+LIBVIRTD_INIT_VARS = \
+	$(COMMON_UNIT_VARS)
+
+if WITH_FIREWALLD
+LIBVIRTD_INIT_VARS += \
+	-e 's|[@]NEED_FIREWALLD[@]|need firewalld|g'
+else ! WITH_FIREWALLD
+LIBVIRTD_INIT_VARS += \
+	-e 's|[@]NEED_FIREWALLD[@]||g'
+endif ! WITH_FIREWALLD
+
 VIRTD_UNIT_VARS = \
 	$(COMMON_UNIT_VARS) \
 	-e 's|[@]deps[@]|Conflicts=$(LIBVIRTD_SOCKET_UNIT_FILES)|g' \
@@ -405,6 +429,12 @@ VIRTPROXYD_UNIT_VARS = \
 	-e 's|[@]sockprefix[@]|libvirt|g' \
 	$(NULL)
 
+libvirtd.init: remote/libvirtd.init.in $(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
+virtproxyd.init: remote/virtproxyd.init.in $(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
 libvirtd.service: remote/libvirtd.service.in $(top_builddir)/config.status
 	$(AM_V_GEN)$(SED) $(LIBVIRTD_UNIT_VARS) $< > $@-t && mv $@-t $@
 

src/remote/libvirtd.confd

@@ -0,0 +1,18 @@
+# /etc/conf.d/libvirtd
+
+# Startup dependency
+# libvirtd typically requires all networks to be up and settled which
+# is what rc_need="net" provides. However if you only use specific networks
+# for libvirtd, you may override this. Or if you only use libvirtd locally.
+rc_need="net"
+
+# The termination timeout (start-stop-daemon parameter "retry") ensures
+# that the service will be terminated within a given time (25 + 5 seconds
+# per default) when you are stopping the service.
+#LIBVIRTD_TERMTIMEOUT="TERM/25/KILL/5"
+
+# LIBVIRTD_OPTS
+# You may want to add '--listen' to have libvirtd listen for tcp/ip connections
+# if you want to use libvirt for remote control
+# Please consult 'libvirtd --help' for more options
+#LIBVIRTD_OPTS="--listen"

src/remote/libvirtd.init.in

@@ -0,0 +1,29 @@
+#!/sbin/openrc-run
+
+description="Virtualization daemon"
+
+LIBVIRTD_OPTS=${LIBVIRTD_OPTS:-"${LIBVIRTD_OPTS}"}
+LIBVIRTD_TIMEOUT=${LIBVIRTD_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/libvirtd"
+command_args="-d ${LIBVIRTD_OPTS}"
+start_stop_daemon_args="--env KRB5_KTNAME=/etc/libvirt/krb5.tab"
+pidfile="@runstatedir@/libvirtd.pid"
+retry="${LIBVIRTD_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    need virtlogd
+    @NEED_FIREWALLD@
+    use ceph dbus iscsid virtlockd
+    after cgconfig corosync ebtables iptables ip6tables nfs nfsmount ntp-client ntpdportmap rpc.statd sanlock xenconsoled
+}
+
+reload() {
+    ebegin "re-exec() libvirtd"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}

src/remote/virtproxyd.confd

@@ -0,0 +1,10 @@
+# /etc/conf.d/virtproxyd
+
+# The termination timeout (start-stop-daemon parameter "retry") ensures
+# that the service will be terminated within a given time (25 + 5 seconds
+# per default) when you are stopping the service.
+#VIRTPROXYD_TERMTIMEOUT="TERM/25/KILL/5"
+
+# VIRTPROXYD_OPTS
+# Please consult 'virtproxyd --help' for more options
+#VIRTPROXYD_OPTS=""

src/remote/virtproxyd.init.in

@@ -0,0 +1,28 @@
+#!/sbin/openrc-run
+
+description="Virtualization daemon proxy"
+
+VIRTPROXYD_OPTS=${VIRTPROXYD_OPTS:-"${VIRTPROXYD_OPTS}"}
+VIRTPROXYD_TIMEOUT=${VIRTPROXYD_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/virtproxyd"
+command_args="-d ${VIRTPROXYD_OPTS}"
+start_stop_daemon_args="--env KRB5_KTNAME=/etc/libvirt/krb5.tab"
+pidfile="@runstatedir@/virtproxyd.pid"
+retry="${VIRTPROXYD_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    use dbus
+    after cgconfig corosync ebtables iptables ip6tables nfs nfsmount ntp-client ntpdportmap rpc.statd sanlock xenconsoled
+    need net
+}
+
+reload() {
+    ebegin "re-exec() virtproxyd"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}

src/secret/Makefile.inc.am

@@ -69,6 +69,13 @@ SYSTEMD_UNIT_FILES_IN += \
 	secret/virtsecretd.service.in \
 	$(NULL)
 
+OPENRC_INIT_FILES += \
+	virtsecretd.init \
+	$(NULL)
+OPENRC_INIT_FILES_IN += \
+	secret/virtsecretd.init.in \
+	$(NULL)
+
 VIRTSECRETD_UNIT_VARS = \
 	$(VIRTD_UNIT_VARS) \
 	-e 's|[@]name[@]|Libvirt secret|g' \
@@ -76,6 +83,9 @@ VIRTSECRETD_UNIT_VARS = \
 	-e 's|[@]sockprefix[@]|virtsecretd|g' \
 	$(NULL)
 
+virtsecretd.init: secret/virtsecretd.init.in $(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
 virtsecretd.service: secret/virtsecretd.service.in \
 		$(top_builddir)/config.status
 	$(AM_V_GEN)$(SED) $(VIRTSECRETD_UNIT_VARS) $< > $@-t && mv $@-t $@

src/secret/virtsecretd.init.in

@@ -0,0 +1,26 @@
+#!/sbin/openrc-run
+
+description="Virtualization secret daemon"
+
+VIRTSECRETD_OPTS=${VIRTSECRETD_OPTS:-"${VIRTSECRETD_OPTS}"}
+VIRTSECRETD_TIMEOUT=${VIRTSECRETD_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/virtsecretd"
+command_args="-d ${VIRTSECRETD_OPTS}"
+pidfile="@runstatedir@/virtsecretd.pid"
+retry="${VIRTSECRETD_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    use ceph dbus iscsid virtlockd
+    after nfs nfsmount
+}
+
+reload() {
+    ebegin "re-exec() virtsecretd"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}

src/storage/Makefile.inc.am

@@ -173,6 +173,13 @@ SYSTEMD_UNIT_FILES_IN += \
 	storage/virtstoraged.service.in \
 	$(NULL)
 
+OPENRC_INIT_FILES += \
+	virtstoraged.init \
+	$(NULL)
+OPENRC_INIT_FILES_IN += \
+	storage/virtstoraged.init.in \
+	$(NULL)
+
 VIRTSTORAGED_UNIT_VARS = \
 	$(VIRTD_UNIT_VARS) \
 	-e 's|[@]name[@]|Libvirt storage|g' \
@@ -180,6 +187,9 @@ VIRTSTORAGED_UNIT_VARS = \
 	-e 's|[@]sockprefix[@]|virtstoraged|g' \
 	$(NULL)
 
+virtstoraged.init: storage/virtstoraged.init.in $(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
 virtstoraged.service: storage/virtstoraged.service.in \
 		$(top_builddir)/config.status
 	$(AM_V_GEN)$(SED) $(VIRTSTORAGED_UNIT_VARS) $< > $@-t && mv $@-t $@

src/storage/virtstoraged.init.in

@@ -0,0 +1,26 @@
+#!/sbin/openrc-run
+
+description="Virtualization storage daemon"
+
+VIRTSTORAGED_OPTS=${VIRTSTORAGED_OPTS:-"${VIRTSTORAGED_OPTS}"}
+VIRTSTORAGED_TIMEOUT=${VIRTSTORAGED_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/virtstoraged"
+command_args="-d ${VIRTSTORAGED_OPTS}"
+pidfile="@runstatedir@/virtstoraged.pid"
+retry="${VIRTSTORAGED_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    use ceph dbus iscsid virtlockd
+    after nfs nfsmount
+}
+
+reload() {
+    ebegin "re-exec() virtstoraged"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}

src/vbox/Makefile.inc.am

@@ -92,6 +92,13 @@ SYSTEMD_UNIT_FILES_IN += \
 	vbox/virtvboxd.service.in \
 	$(NULL)
 
+OPENRC_INIT_FILES += \
+	virtvboxd.init \
+	$(NULL)
+OPENRC_INIT_FILES_IN += \
+	vbox/virtvboxd.init.in \
+	$(NULL)
+
 VIRTVBOXD_UNIT_VARS = \
 	$(VIRTD_UNIT_VARS) \
 	-e 's|[@]name[@]|Libvirt vbox|g' \
@@ -99,6 +106,9 @@ VIRTVBOXD_UNIT_VARS = \
 	-e 's|[@]sockprefix[@]|virtvboxd|g' \
 	$(NULL)
 
+virtvboxd.init: vbox/virtvboxd.init.in $(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
 virtvboxd.service: vbox/virtvboxd.service.in $(top_builddir)/config.status
 	$(AM_V_GEN)$(SED) $(VIRTVBOXD_UNIT_VARS) $< > $@-t && mv $@-t $@
 

src/vbox/virtvboxd.init.in

@@ -0,0 +1,26 @@
+#!/sbin/openrc-run
+
+description="Virtualization vbox daemon"
+
+VIRTVBOXD_OPTS=${VIRTVBOXD_OPTS:-"${VIRTVBOXD_OPTS}"}
+VIRTVBOXD_TIMEOUT=${VIRTVBOXD_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/virtvboxd"
+command_args="-d ${VIRTVBOXD_OPTS}"
+pidfile="@runstatedir@/virtvboxd.pid"
+retry="${VIRTVBOXD_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    use ceph dbus iscsid virtlockd
+    after nfs nfsmount
+}
+
+reload() {
+    ebegin "re-exec() virtvboxd"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}

src/vz/Makefile.inc.am

@@ -67,6 +67,13 @@ SYSTEMD_UNIT_FILES_IN += \
 	vz/virtvzd.service.in \
 	$(NULL)
 
+OPENRC_INIT_FILES += \
+	virtvzd.init \
+	$(NULL)
+OPENRC_INIT_FILES_IN += \
+	vz/virtvzd.init.in \
+	$(NULL)
+
 VIRTVZD_UNIT_VARS = \
 	$(VIRTD_UNIT_VARS) \
 	-e 's|[@]name[@]|Libvirt vz|g' \
@@ -74,6 +81,9 @@ VIRTVZD_UNIT_VARS = \
 	-e 's|[@]sockprefix[@]|virtvzd|g' \
 	$(NULL)
 
+virtvzd.init: vz/virtvzd.init.in $(top_builddir)/config.status
+	$(AM_V_GEN)$(SED) $(LIBVIRTD_INIT_VARS) $< > $@-t && mv $@-t $@
+
 virtvzd.service: vz/virtvzd.service.in $(top_builddir)/config.status
 	$(AM_V_GEN)$(SED) $(VIRTVZD_UNIT_VARS) $< > $@-t && mv $@-t $@
 

src/vz/virtvzd.init.in

@@ -0,0 +1,26 @@
+#!/sbin/openrc-run
+
+description="Virtualization vz daemon"
+
+VIRTVZD_OPTS=${VIRTVZD_OPTS:-"${VIRTVZD_OPTS}"}
+VIRTVZD_TIMEOUT=${VIRTVZD_TERMTIMEOUT:-"TERM/25/KILL/5"}
+
+command="@sbindir@/virtvzd"
+command_args="-d ${VIRTVZD_OPTS}"
+pidfile="@runstatedir@/virtvzd.pid"
+retry="${VIRTVZD_TERMTIMEOUT}"
+
+extra_started_commands="reload"
+description_reload="re-exec the daemon to enforce configuration reload"
+
+depend() {
+    use ceph dbus iscsid virtlockd
+    after nfs nfsmount
+}
+
+reload() {
+    ebegin "re-exec() virtvzd"
+
+    start-stop-daemon --signal SIGHUP \
+      --exec "${command}" --pidfile "${pidfile}"
+}