hostdev: Make comments easier to change later

Replace the term "loop" with the more generic "step". This allows us
to be more flexible and eg. have a step that consists in a single
function call.

Don't include the number of steps in the first comment of the
function, so that we can add or remove steps without having to worry
about keeping that comment in sync.

For the same reason, remove the summary contained in that comment.

Clean up some weird vertical spacing while we're at it.

src/util/virhostdev.c

@@ -546,18 +546,18 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr hostdev_mgr,
     if (!(pcidevs = virHostdevGetPCIHostDeviceList(hostdevs, nhostdevs)))
         goto cleanup;
 
-    /* We have to use 9 loops here. *All* devices must
+    /* Detaching devices from the host involves several steps; each
-     * be detached before we reset any of them, because
+     * of them is described at length below.
-     * in some cases you have to reset the whole PCI,
+     *
-     * which impacts all devices on it. Also, all devices
+     * All devices must be detached before we reset any of them,
-     * must be reset before being marked as active.
+     * because in some cases you have to reset the whole PCI, which
-     */
+     * impacts all devices on it. Also, all devices must be reset
+     * before being marked as active */
 
-    /* Loop 1: validate that non-managed device isn't in use, eg
+    /* Step 1: validate that non-managed device isn't in use, eg
      * by checking that device is either un-bound, or bound
      * to pci-stub.ko
      */
-
     for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
         virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
         bool strict_acs_check = !!(flags & VIR_HOSTDEV_STRICT_ACS_CHECK);
@@ -588,7 +588,7 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr hostdev_mgr,
         }
     }
 
-    /* Loop 2: detach managed devices (i.e. bind to appropriate stub driver) */
+    /* Step 2: detach managed devices (i.e. bind to appropriate stub driver) */
     for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
         virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
 
@@ -608,7 +608,7 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr hostdev_mgr,
     /* At this point, all devices are attached to the stub driver and have
      * been marked as inactive */
 
-    /* Loop 3: Now that all the PCI hostdevs have been detached, we
+    /* Step 3: Now that all the PCI hostdevs have been detached, we
      * can safely reset them */
     for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
         virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
@@ -619,7 +619,7 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr hostdev_mgr,
             goto reattachdevs;
     }
 
-    /* Loop 4: For SRIOV network devices, Now that we have detached the
+    /* Step 4: For SRIOV network devices, Now that we have detached the
      * the network device, set the netdev config */
     for (i = 0; i < nhostdevs; i++) {
          virDomainHostdevDefPtr hostdev = hostdevs[i];
@@ -632,7 +632,7 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr hostdev_mgr,
          last_processed_hostdev_vf = i;
     }
 
-    /* Loop 5: Now mark all the devices as active */
+    /* Step 5: Now mark all the devices as active */
     for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
         virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
 
@@ -642,7 +642,7 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr hostdev_mgr,
             goto inactivedevs;
     }
 
-    /* Loop 6: Now remove the devices from inactive list. */
+    /* Step 6: Now remove the devices from inactive list. */
     for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
         virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
 
@@ -651,7 +651,7 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr hostdev_mgr,
         virPCIDeviceListDel(hostdev_mgr->inactivePCIHostdevs, dev);
     }
 
-    /* Loop 7: Now set the used_by_domain of the device in
+    /* Step 7: Now set the used_by_domain of the device in
      * activePCIHostdevs as domain name.
      */
     for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
@@ -666,7 +666,7 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr hostdev_mgr,
             virPCIDeviceSetUsedBy(activeDev, drv_name, dom_name);
     }
 
-    /* Loop 8: Now set the original states for hostdev def */
+    /* Step 8: Now set the original states for hostdev def */
     for (i = 0; i < nhostdevs; i++) {
         virPCIDevicePtr dev;
         virPCIDevicePtr pcidev;
@@ -681,10 +681,9 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr hostdev_mgr,
         dev = virPCIDeviceNew(pcisrc->addr.domain, pcisrc->addr.bus,
                               pcisrc->addr.slot, pcisrc->addr.function);
 
-        /* original states "unbind_from_stub", "remove_slot",
+        /* Appropriate values for the unbind_from_stub, remove_slot
-         * "reprobe" were already set by pciDettachDevice in
+         * and reprobe properties of the device were set earlier
-         * loop 2.
+         * by virPCIDeviceDetach() */
-         */
         VIR_DEBUG("Saving network configuration of PCI device %s",
                   virPCIDeviceGetName(dev));
         if ((pcidev = virPCIDeviceListFind(pcidevs, dev))) {
@@ -699,7 +698,7 @@ virHostdevPreparePCIDevices(virHostdevManagerPtr hostdev_mgr,
         virPCIDeviceFree(dev);
     }
 
-    /* Loop 9: Now steal all the devices from pcidevs */
+    /* Step 9: Now steal all the devices from pcidevs */
     while (virPCIDeviceListCount(pcidevs) > 0)
         virPCIDeviceListStealIndex(pcidevs, 0);
 
@@ -819,14 +818,10 @@ virHostdevReAttachPCIDevices(virHostdevManagerPtr hostdev_mgr,
         goto cleanup;
     }
 
-    /* Loop through the assigned devices 4 times: 1) delete them all from
+    /* Reattaching devices to the host involves several steps; each
-     * activePCIHostdevs, 2) restore network config of SRIOV netdevs, 3) Do a
+     * of them is described at length below */
-     * PCI reset on each device, 4) reattach the devices to their host drivers
-     * (managed) or add them to inactivePCIHostdevs (!managed).
-     */
 
-    /*
+    /* Step 1: verify that each device in the hostdevs list really was in use
-     * Loop 1: verify that each device in the hostdevs list really was in use
      * by this domain, and remove them all from the activePCIHostdevs list.
      */
     i = 0;
@@ -856,8 +851,7 @@ virHostdevReAttachPCIDevices(virHostdevManagerPtr hostdev_mgr,
      * pcidevs, but has been removed from activePCIHostdevs.
      */
 
-    /*
+    /* Step 2: restore original network config of hostdevs that used
-     * Loop 2: restore original network config of hostdevs that used
      * <interface type='hostdev'>
      */
     for (i = 0; i < nhostdevs; i++) {
@@ -880,7 +874,7 @@ virHostdevReAttachPCIDevices(virHostdevManagerPtr hostdev_mgr,
         }
     }
 
-    /* Loop 3: perform a PCI Reset on all devices */
+    /* Step 3: perform a PCI Reset on all devices */
     for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) {
         virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i);
 
@@ -894,7 +888,7 @@ virHostdevReAttachPCIDevices(virHostdevManagerPtr hostdev_mgr,
         }
     }
 
-    /* Loop 4: reattach devices to their host drivers (if managed) or place
+    /* Step 4: reattach devices to their host drivers (if managed) or place
      * them on the inactive list (if not managed)
      */
     while (virPCIDeviceListCount(pcidevs) > 0) {